B-Safety. Product E-Catalogue

Transcription

1 B-Safety Product E-Catalogue

2 SAFETY SHOES Product Description Product Image Brand: Giasco Safety shoes Italy (Giasco) model Verdi no AC880BP-half boot EN20345: J toe protection S3 High shoe, water-resistant WRU leather thickness 1,8-2,0mm. Perspiring and abrasion resistant fabric lining. Shoe with refracting fabric insert. Lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE anti-perforation steel according to EN SOLE ACTION bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC. INSOLE in high density and open cells latex foam. Absorbing, antistatic and perspiring. Safety shoes Italy (Giasco) model Mozart no AC810BP office EN20345: J toe protection S3. Low shoe, water-resistant WRU leather thickness 1,8-2,0 mm. Perspiring and abrasion resistant fabric lining. TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE anti perforation steel according to EN SOLE ACTION bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC. INSOLE in high density and open cells latex foam. Absorbing, antistatic and perspiring. Safety shoes Italy (Giasco) model FRRIR no 93L17C S3-half boot EN20345: J toe protection s3 Ankle boot thickness 1.8-2mm Oil resistance outsole Slipping resistance sole Water resistance upper Penetration resistance Antistatic footwear Composite toecap No metal toecap(extra light)polymeric EN12568 No metal sheet(flexible) Leather water proof real leather- Antibacterial High visibility 2

3 EDISON SB+E+P 20D60C 500V sole Extra light TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE TECNICAL DIELECTRIC bidensity polyurethane and dielectric RUBBER, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and antislipping SRC EN ISO 13287: The bottom of the shoe, within some limits (no humidity, it does not concern the upper), offers electrical resistance against tension up to 500V - M > (met. similar EN 344/1 p. 5.7) - Dielectric resistance: CSA Canadian standard Z increase 1 kv/sec voltage V /60 hz - duration 1 minute. INSOLE removable, anatomic, absorbing, antistatic and perspiring HRO resistant to hot contact sole Size Shoe weight Sz 42 gr. 610 High, WRU back leather and heel in anti-scratch leather thickness 1,8-2,0 mm shoe. Perspiring and abrasion resistant fabric lining. Soft leather tongue. Completely metal free shoe. TITAN S3 43G11C Calf, IDROTECH WRU oiled grain leather thickness 1,8-2,0 mm. Perspiring and resistant to abrasion internal fabric lining. Boot with refracting fabric insert. COMPLETELY METAL FREE BOOT TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE flexible anti-perforation composite fabric according to EN SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC INSOLE removable, anatomic, absorbing, antistatic and perspiring Boot height sole included 28 cm Manchester S3 CI RD078A High shoe, WRU back leather thickness 1,8-2,0 mm. Perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE flexible anti-perforation composite fabric according to EN SOLE EASY RIDER bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC INSOLE double-component removable: absorbing, antistatic, perspiring, and antislipping with anatomic and anti-shock heel area. CI insulated surface against cold -17 C ESD class 3 passes the test EN ISO , according to the norm EN ISO standards for electrical resistance 3

4 GRIP S3 CI HI WR HRO 23L99C Calf boot, IDROTECH WRU full grain leather thickness 1,8-2,0 mm, with refracting insert. Lining and tongue in felt with antibacterial aluminum WinTherm safety microfilm and ANTICOLD perspiring and abrasion resistant fur OPENING BY ZIPPER TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE flexible anti-perforation composite fabric according to EN SOLE TECNICAL ANTISTATIC bidensity polyurethane and antistatic RUBBER. Sole resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC INSOLE in felt removable, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold -35 C HI insulated surface against heat WR water resistant shoe HRO resistance to hot contact sole Boot height, sole included 26 cm ERCOLANO S3 23D66C TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE TECNICAL ANTISTATIC bidensity polyurethane and antistatic RUBBER, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion anti-shock and anti-slipping SRC EN 13287:2007 INSOLE removable, anatomic, absorbing, antistatic and perspiring HRO resistant to hot contact sole Size BREDA S3 33N32C UNI EN ISO 20345:2008 S3 SRC ESD class 3 extra light Low holed shoe, Nubuk IDROTECH WRU grain leather thickness 1,8-2,0 mm, with external technical fabric. Highly perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue. COMPLETELY METAL FREE SHOE TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE giasco 24HOURS bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC EN ISO 13287:2007 INSOLE double-component removable: absorbing, antistatic, perspiring and anti-slipping with anatomic and anti-shock heel area. ESD class 3 according to EN ISO standards for electrical resistance Size Shoe weight Sz 42 gr

5 OHIO S3 33N39C UNI EN ISO 20345:2008 S3 SRC ESD class 3 WRWRU CLASS 3 High shoe, Nubuk IDROTECH WRU grain leather thickness 1,8-2,0 mm, with external technical fabric. Highly perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE giasco 24HOURS bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC EN ISO 13287:2007 INSOLE double-component removable: absorbing, antistatic, perspiring and antislipping with anatomic and anti-shock heel area. ESD class 3 according to EN ISO standards for electrical resistance Size Shoe weight Sz 42 gr. 530 ODENSE S1P 31L35C UNI EN ISO 20345:2008 S1P SRC ESD class 3 TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE giasco 24HOURS bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC EN ISO 13287:2007 INSOLE double-component removable: absorbing, antistatic, perspiring and antislipping with anatomic and anti-shock heel area. ESD class 3 according to EN ISO standards for electrical resistance Size Shoe weight Sz 42 gr. 495 Low holed shoe, suede back leather thickness 1,8-2,0 mm. Highly perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue. COMPLETELY METAL FREE SHOE STOCCOLMA S1P Sandal, full grain IDROTECH WRU leather thickness 1,8-2,0 mm. Highly perspiring and abrasion resistant fabric lining. Shoe with high visibility insert. Closing with strap. COMPLETELY METAL FREE SHOE TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE giasco 24HOURS bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC EN ISO 13287:2007 INSOLE double-component removable: absorbing, antistatic, perspiring and anti-slipping with anatomic and anti-shock heel area. ESD class 3 according to EN ISO standards for electrical resistance Size Shoe weight Sz 42 gr

6 SALVADOR S3 43D24C Low, WRU back leather, with IDROTECH WRU oiled grain leather inserts, thickness 1,8-2,0 mm shoe. Highly perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRB EN ISO 13287:2007 INSOLE in latex foam at high density and open cells. Perspiring, absorbing and antistatic. ESD class 3 according to EN ISO :2001 standards for electrical resistance Size Shoe weight Sz 42 gr. 560 CUBA S3 43D29C High, WRU back leather, with IDROTECH WRU oiled grain leather inserts, thickness 1,8-2,0 mm shoe. Highly perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRB EN ISO 13287:2007 INSOLE in latex foam at high density and open cells. Perspiring, absorbing and antistatic. ESD class 3 according to EN ISO :2001 standards for the electrical resistance Size Shoe weight Sz 42 gr. 580 CAMBRIDGE S3 43D68C TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and antislipping SRB EN ISO13287:2007 INSOLE removable, anatomic, absorbing, antistatic and perspiring Size Shoe weight Sz 42 gr

7 KENT S3 43D61C. Low, WRU back leather thickness 1,8-2,0 Perspiring and abrasion resistant fabric lining. Shoe with refracting fabric insert. High, WRU back leather thickness 1,8-2,0 mm shoe. Perspiring and abrasion resistant fabric lining. Shoe with refracting fabric insert. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRB EN ISO 13287:2007 INSOLE removable, anatomic, absorbing, antistatic and perspiring Size Shoe weight Sz 42 gr. 560 ARTICO S3 ci 43T11C TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRB EN 13287:2004 INSOLE removable, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold Size Boot weight Sz 42 gr. 770 Calf, IDROTECH WRU oiled grain leather thickness 1,8-2,0 mm boot. Soft windtex water resistant membrane lining, with very good perspiration and abrasion resistance. Completely metal free boot ONTARIO S3 ci 43B11C Calf, WRU water resistant leather thickness 1,8-2,0 mm boot. Perspiring and abrasion resistant fur lining. Completely metal free boot. TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE ORIGINAL bidensity polyurethane antistatic, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRB EN ISO 13287:2007 INSOLE removable, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold Size Boot weight Sz 42 gr

8 BONN S3 ci 23L54C HI Low shoe, full grain IDROTECH WRU leather thickness 1,8-2,0 mm and WRU Carbon mix leather. Reinforced support in the heel area. Calf leather internal lining. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE flexible anti-perforation composite fabric according to EN SOLE TECNICAL ANTISTATIC bidensity polyurethane and antistatic RUBBER, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and antislipping SRC EN 13287:2007 INSOLE in natural LEATHER, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold HI insulated surface against heat WR water resistant shoe HRO resistant to hot contact sole Size Shoe weight Sz 42 gr. 620 GERA S3 CI 23L59C HI High shoe, full grain IDROTECH WRU leather thickness 1,8-2,0 mm and WRU Carbon mix leather. Reinforced support in the heel area. Calf leather internal lining. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN MIDSOLE flexible anti-perforation composite fabric according to EN SOLE TECNICAL ANTISTATIC bidensity polyurethane and antistatic RUBBER, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, antishock and anti-slipping SRC EN 13287:2007 INSOLE in natural LEATHER, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold HI insulated surface against heat WR water resistant shoe HRO resistant to hot contact sole Size Shoe weight Sz 42 gr. 630 ALPI S3 23G58C HI High, IDROTECH WRU oiled grain leather and heel in IDROTECH WRU Nubuk thickness 1,8-2,0 mm shoe. Soft windtex water resistant membrane lining, with very good perspiration and abrasion resistant. Soft, lined and padded tongue TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE TECNICAL ANTISTATIC bidensity polyurethane and antistatic RUBBER, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and antislipping SRC EN 13287:2007 INSOLE removable, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold HI insulated surface against heat - WR water resistant shoe HRO resistant to hot contact sole - Size

9 MONTANA S3 23L96C felt antistat ic insole Calf, IDROTECH WRU full grain leather 1,8-2,0 mm boot. Internal windtex waterproof soft membrane lining, with very good perspiration and abrasion resistance. Soft, lined and padded tongue. TOECAP 200J polymeric composite non-thermic according to EN 12568:98 MIDSOLE flexible anti-perforation composite fabric according to EN 12568:98 SOLE TECNICAL ANTISTATIC bidensity polyurethane and antistatic RUBBER, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and antislipping SRC EN 13287:2007 INSOLE in felt removable, anatomic, absorbing, antistatic and perspiring CI insulated surface against cold HRO resistant to hot contact sole Size Shoe weight Sz 42 gr. 720 VESUVIO S3 53F15 TOECAP 200J steel according to EN 12568:98 MIDSOLE steel anti-perforation according to EN 12568:98 SOLE glued in antistatic rubber, anti-slipping, anti-oil, antishock INSOLE removable, anatomic, absorbing, antistatic and perspiring HRO resistant to hot contact sole Size Boot weight Sz 42 gr. 890 Knee, IDROTECH WRU full grain leather thickness 1,8-2,0 mm boot. RUBBER SOLE HRO 300 C Cervino S3 13G16CP Calf boot, Nubuk IDROTECH WRU leather thickness 1,8-2,0 mm. Perspiring and abrasion resistant fur lining. TOECAP 200J steel according to EN 12568:98 MIDSOLE steel anti-perforation according to EN 12568:98 SOLE NEW TREND bidensity polyurethane antistatic, anti-oil, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping. INSOLE in high density and open cells latex foam. Perspiring, absorbing and antistatic. CI insulated surface against cold Size Boot weight Sz 42 gr

10 ALASKA S3 CI 13B84CP TOECAP 200J steel according to EN 12568:98 MIDSOLE steel anti-perforation according to EN 12568:98 SOLE NEW TREND bidensity polyurethane antistatic, anti-oil, resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping INSOLE in high density and open cells latex foam. Perspiring, absorbing and antistatic. CI insulated surface against cold Size Boot weight Sz 42 gr. 730 Calf, WRU water-resistant leather thickness 1,8-2,0 mm boot. Perspiring and abrasion resistant fur lining. Soft, lined and padded tongue. Brand: Exena Safety shoes EXENA 1 model -half boot EN 20345:2011S3 J toe Protection S3 Oil resistance outsole Slipping resistance sole Antis lip, antistatic and hard wearing P.U.Soft P.U. comfort inner layer anatomic, breathable foot Safety shoes EXENA 2 model Office EN 20345:2011 S3 J toe Protection S3 Oil resistance outsole Slipping resistance sole Antis lip, antistatic and hard wearing P.U.Soft P.U. Comfort inner layer. Anatomic, breathable. 10

11 ORIONE S3 SRC Upper water resistant grain leather. Lining breathable, abrasion resistant. Composite toecap. Textile anti-perforation midsole. Insole full peace, removable, antistatic. Sole PU 2D. PEGASO S3 SRC Upper water resistant grain leather. Lining breathable, abrasion resistant. Composite toecap. Textile anti-perforation midsole. Insole full peace, removable, antistatic. Sole PU 2D. CRETA S3 SRC Upper water resistant grain leather. Lining breathable, abrasion resistant. Composite toecap. Textile anti-perforation midsole. Insole full peace, removable, antistatic. Sole PU 2D. CIPRO S3 SRC Upper water resistant grain leather. Lining breathable, abrasion resistant. Composite toecap. Textile anti-perforation midsole. Insole full peace, removable, antistatic. Sole PU 2D. 11

12 SAN MARINO S1P SRC HRO Textile upper. Abrasion resistant breathable lining. Composite toe cap. Textile perforation-resistant midsole. Completely removable anti-static insole. Nitril, HRO rubber sole. SEPANG S1P SRC HRO Textile upper. Abrasion resistant breathable lining. Composite toe cap. Textile perforation-resistant midsole. Completely removable anti-static insole. Nitril, HRO rubber sole. GIADA S2 SRC Upper water resistant microfiber. Lining breathable, abrasion resistant. Composite toecap. Insole full piece, removable, antistatic. Sole 2D. Sizes: 35/48 QUARZO S2 SRC Upper water resistant microfiber. Lining breathable, abrasion resistant. Composite toecap. Insole full piece, removable, antistatic. Sole 1D. Sizes: 35/47 12

13 SMERALDO S1 SRC Upper microfiber. Lining breathable, abrasion resistant. Composite toecap. Insole full piece, removable, antistatic. Sole 1D. Sizes: 35/47 AMETISTA S1 SRC Upper microfiber velcro buckling. Lining breathable, abrasion resistant. Composite toecap. Insole full piece, removable, antistatic. Sole 2D. Sizes: 35/48 AMBRA S1 SRC Upper microfiber. Lining breathable, abrasion resistant. Composite toecap. Insole full piece, removable, antistatic. Sole 1D. Sizes: 35/47 Good Year SB Antistatic anti-slip oil & acid resistant 13

14 SAFETY GLASSES Product Description Product Image Brand: Exena Exena safety glasses (Clear) According to EN166: ANSI.Z1 Clear Code Exena safety glasses (Smoke) According to EN166:2010 Clear Code Exena safety glasses (Clear) According to EN166: ANSI.Z1 Clear Code

15 Exena safety glasses (Smoke) According to EN166: ANSI.Z1 Smoke Code Exena safety glasses (Mirror) According to EN166 + ANSI.Z1 Mirror Code Exena safety glasses (Medical) According to EN 166+ ANSI.Z1 Exena safety goggles According to EN166 + ANSI.Z1 + EN EN169 + EN170 + EN171 + EN172 Anti fog For welding 15

16 SAFETY HYGIENE EQUIPMENT Product Description Product Image Brand: Unicare LSES 8 GI Uni care safety emergency shower galvanized iron Made in India LSES 7/8 GI Uni care safety emergency shower galvanized iron Made in India LSES 8 CSS 304 Uni care safety emergency shower Stainless Steel Made in India 16

17 LSES 7/8 CSS 304 Uni care safety emergency shower Stainless Steel Made in India LSE1/2 CSS C (with cover) EYE/FACE WASH PUSH + PEDAL LEVER Operated with protective cover to prevent air borne contaminants from entering the eyewash heads. Decontamination Units These units are essential in areas where large amounts of chemicals are used, handled or stored or where chemical splash hazards exist. The decontamination unit is a complete safety station which immediately discharges copious amounts of water on the whole body of the injured person upon the activation of a single valve or walk-on platform. These units are designed to be located in areas of high hazard where space is limited. They can be mounted against a wall and still leave an open space. Each unit consists of several self-cleaning spray nozzles plus weep sprays that provides overall body saturation within a matter of seconds. ACTIVATION: Shower is activated with instant action Ball valve with easy-to-locate Yellow Cycolac Push-plate or by weight on walk-on Platform to operate the Flush Valve. SUPPLY: 1 BSP - Recommended pressure: 30 PSI / 2 kg/cm2 NET SHIPPING WEIGHT - LMNS 10 : 35 kg - LMNS 11 : 23 kg LMNS 10: MULTIPLE NOZZLE DECONTAMINATION UNITS OPERATED BY WALK -ON PLATFORM - LMNS 11: MULTIPLE NOZZLE DECONTAMINATION UNITS OPERATED BY PUSH LEVER 17

18 EMERGENCY EYE WASH BOTTLE - UEWB 12 Permits immediate flushing for the crucial first few seconds of an eye injury by flushing the eyes in the event of an accident involving acids, Uni care - Made in India LSE2 CSS 304: EYE/FACE WASH FOOT PEDAL OPERATED Uni care - Made in India LSE 2: EYE/FACE WASH FOOT PEDAL OPERATED Uni care - Made in India 18

19 UPEW liters capacity for easier transport Uni care safety - Made in India Reflective/flexible Con 100 CM 19

20 SAFETY GLOVES Product Description Product Image Brand: Exena DESCRIPTION: Green Latex Palm and yellow Poly Cotton Glove Coated palm Elasticized cuff Rough finish over According to EN BENEFITS: A flexible, robust glove offering great dexterity and with good resistance to tearing Protects the hand in damp environments or against aggressive detergents or alcohols Breathable back of hand to reduce perspiration RECOMMENDED FOR THESE LINES OF WORK: Construction / Masonry, fabric Construction / Public works Construction / Exterior work DESCRIPTION: Poly cotton orange and red latex half coated glove latex coated- half coated /heavy Elasticized cuff Rough finish over According to EN BENEFITS: A flexible, robust glove offering great dexterity and with good Resistance to tearing Protects the hand in damp environments or against aggressive detergents or alcohols Breathable back of hand to reduce perspiration RECOMMENDED FOR THESE LINES OF WORK: Construction / Masonry, fabric Construction / Public works Construction / Exterior work Mechanical industry Transport logistics 20

21 DESCRIPTION: Black nylon glove Black color is ideal to deal with the dirty environment Thin nitrial coating According to EN BENEFITS: A flexible, robust glove offering great dexterity and with good Resistance to tearing Protects the hand in damp environments or against aggressive detergents or alcohols RECOMMENDED FOR THESE LINES OF WORK: Electronic components Mechanical industry Transport logistics DESCRIPTION: Gray pu palm coated glove Level 3 cut resistance glove According to EN BENEFITS: A flexible, provide high degree of comfort Protects the hand in damp environments or against aggressive detergents or alcohols RECOMMENDED FOR THESE LINES OF WORK: Handling metal sheet Construction roofing Mechanical industry Transport logistics Safety dotted glove - EXENA Dotted Trico glove double face According to EN388 21

22 PVC safety black glove EXENA according to EN CM PVC safety black glove EXENA according to EN CM 22

23 SAFETY CLOTHS & UNIFORMS Product Description Product Image Brand: NetCo PVC boot NET CO According to: EN ISO standard: 2011 S5 SRA Steel toe cap Steel midsole (S5) TOSCANE SEC / 00A2209 Brand: Protecta Safety full body Harness Model First (with Belt) Manufactured by Protecta Model According to EN 361+ EN358 23

24 Safety full body Harness Model First Manufactured by Protecta Model According to EN358 Double lanyards First Manufactured by Protecta Model According to EN 355 PROTECTIVE GARMENTS AGAINST ELECTRICAL ARC EN ISO 11612:2008 EN ISO :2007 Material: Cotton P/No: ELECTPRO garments are designed to protect the body, arms and legs of the personnel against the thermal effects of electric arc, these special garments are certified according to 89 / 686 EEC Personal Protective Equipment, harmonized EN and EN ISO standards. ELECTPRO garments have the CE certificate. 24

25 SAFETY FIRE FIGHTING EQUIPMENT Product Description Product Image Brand: IST Material: Alüminize P / N: FYRAL 1000 P P / N: FYRAL 1000 P MB Our products produce by Standard EN 1486 DESIGN Headgear- with heat reflector appearance Lenses Jacket- its inner side is convenient for attaching Breathing apparatus Trousers Gloves Rubber fireman boot FYRPRO 440 Series Fire Protection Garments Have been produced according to EN 469: 2005 standard Our products have been CE marked and certified in accordance with 89/686/EEC PPE Directive. Reflective: 50 mm yellow-grey-yellow it is non-burning Zippers : Aramid zipper with Brass teeth 25

26 SAFETY HEAD GEAR Product Description Product Image Brand: Taliaplast OPUS Helmet Front Trim 37cm a life of more than 3 years 370 G 6 colors 4 versions OPUS Low Voltage Version Front Trim 37cm a life of more than 3 years EBT Electrical Insulation (without side ventilation) 420 G 6 colors 4 versions ALBATROSS Helmet Front Trim 37cm a life of more than 3 years Textile Headdress 390 G Electrical isolation EBT (without side vent) Small Visor 3-point chinstrap width 20mm 26

27 OCÉANIC Helmet Front Trim 37cm a life of more than 3 years 370 G 7 colors 4 versions VISIOCÉANIC Helmet Front Trim 37cm a life of more than 3 years 400 G 6 colors 4 versions ORYON Helmet Front Trim 40cm a life of more than 3 years 285 G 6 colors 4 versions OPALE Helmet A life of more than 3 years Monobloc lining 340 G Electrical isolation EBT (440 Va) 6 Colors 27

28 Contact Details Address: 50 Al Gomhorya St. Downtown, Cairo - Egypt Tel: (+2) Fax: (+2) Cell: (+2) (+2) (+2) info@bsafetyegypt.com Website: 28