CURRICULUM VITAE Associate Professor Michael Regev November 2018

Transcription

1 CURRICULUM VITAE Associate Professor Michael Regev November 2018 Work Address: ORT Braude College, Dept. of Mechanical Engineering P.O. Box 78, Karmiel 21982, Israel. Tel: , Fax: Home Address: 4 WIZO St., Haifa 34400, Israel, Tel: Date of Birth: August 23, 1964 Place of Birth: Haifa, Israel Marital Status: Married, 3 children ACADEMIC DEGREES: 1998 Ph.D., Materials Engineering, Technion - Israel Institute of Technology, Haifa, Israel "The Influence of the Microstructure on the Creep Properties of AZ91D Magnesium Alloy" under the supervision of Prof. A. Rosen and Assoc. Prof. M. Bamberger 1994 M.Sc., Materials Engineering, Technion - Israel Institute of Technology, Haifa, Israel "The Influence of Thermal Processes on the Properties of T22 Steel to T91 Steel Weldments" under the supervision of Prof. B.Z. Weiss and Dr. S. Berger 1989 B.Sc., Mechanical Engineering, Technion - Israel Institute of Technology, Haifa, Israel. Cum Laude ACADEMIC POSITIONS: 2015-present 2013-present 2006-present ORT Braude College, Karmiel, Israel Head, Mechanical Engineering M.Sc. Program ORT Braude College, Karmiel, Israel Associate Professor, Mechanical Engineering Department The Israel Institute of Metals, Technion Consultant Researcher, sabbatical at The Israel Institute of Metals, Technion ORT Braude College, Karmiel, Israel Head, Mechanical Engineering Department

2 ORT Braude College, Karmiel, Israel Senior Lecturer, Mechanical Engineering Department ORT Braude College, Karmiel, Israel Lecturer, Mechanical Engineering Department Tel-Aviv Acadenic College of Engineering, Tel-Aviv, Israel Adjunct Lecturer The Israel Institute of Metals, Technion - Israel Institute of Technology, Haifa, Israel Senior Researcher, Metallurgical Laboratory Technion - Israel Institute of Technology, Haifa, Israel Teaching Assistant in the Faculty of Materials Engineering PROFESSIONAL EXPERIENCE: RAFAEL Ltd., Haifa, Israel. Welding Group Leader, areas of specialization: TIG, MIG, EBW, PAW welding processes, robot welding Intel Israel Ltd., Haifa, Israel. Failure Analysis Team Leader, areas of specialization: failure analysis of electronic chips Israeli Electric Company (IEC), Haifa, Israel. Mechanical Engineer, areas of specialization: steam boilers, steam pipeline, welding TEACHING EXPERIENCE: 2005-present Ort Braude College of Engineering Materials Engineering, Introduction to Production Processes, Advanced Materials Engineering Plastic Deformation Theory (M.Sc. Program) IDF (reserve duty) Basic Principles of Strength and Materials Engineering Tel-Aviv Academic College of Engineering Materials and Manufacturing Technologies 1999 The Israel Institute of Metals Introduction to Materials Engineering (for Israel Military Industries engineers)

3 Technion Teaching Assistant in: Materials Selection, Thermal Treatments of Metals Laboratory Instructor in: Students Lab, Advanced Materials Engineering Lab, Experiment developing for Advanced Materials Engineering Lab ACADEMIC AND PROFESSIONAL AWARDS AND GRANTS: Funded Research Projects: "Interrupted Creep of Magnesium Alloys", The Israel Institute of Metals and Prof. A. Rosen, January 1999 February 2001, approx. $30,000 "Development of Gold Alloys", The Israel Institute of Metals, January 2000 February 2001, approx. $100,000 "Friction Stir Welding", RAFAEL Ltd., January December 2003, approx. $35,000 "Development of a New Dental Bur", Ministry of Economy and Industry, November 2007 October 2009, approx. $ "Development of a New Thermo-Mechanical Process for Medium Carbon Steels", Ministry of Economy and Industry, June 2017 December 2017, approx. $15700 Internal funding by OBC over the years for various research projects in the fields of friction stir welding and friction stir processing, approx. $25000 Honors and Awards: 2001 Listed in "Who s Who in Science and Engineering" 2001 Listed in "Who s Who in the World" 1998 The Miriam and Aaron Gutwirth Special Distinction Fellowship Award 1996 "GRANJON" Award of the International Welding Institute IIW 1989 Bachelor of Science Cum Laude MEMBERSHIP IN PROFESSIONAL ORGANIZATIONS: ASME, member since January 2007

4 REVIEWER FOR: 1. Journal of Materials Science 2. Physica Status Solidi 3. Materials Science and Engineering 4. Journal of Materials Engineering and Performance 5. Materials and Design 6. Micromachines 7. Journal of Non-Crystalline Solids 8. Coatings 9. Wear 10. Metals 11. Journal of Alloys and Compounds EDITORSHIP: 1. Materials special issue on High Entropy Alloys (Guest Editor) 2. Metals special issue on Amorphous Alloys (Guest Editor) LIST OF PUBLICATIONS Theses: Ph.D. M.Sc. "The Influence of the Microstructure on the Creep Properties of AZ91D Magnesium Alloy" Research conducted under the supervision of Professor A. Rosen and Associate Professor Menachem Bamberger. "The Influence of Thermal Processes on the Properties of T22 Steel to T91 Steel Weldments" Research conducted under the supervision of Professor B.Z. Weiss and Dr. Shlomo Berger. Refereed Journal Papers: 1. M. Regev, S. Berger and B. Z. Weiss: "Investigation of Microstructure, Mechanical and Creep Properties of Weldments between T91 and T22 Steels", Welding Journal (Research Supplement), Volume 75, Number 8, pp. 261s - 268s (1996) 2. M. Regev, E. Aghion and A. Rosen: "Creep Studies of AZ91D Pressure Die Casting", Materials Science and Engineering A, Vol. A , pp (1997) 3. M. Regev, E. Aghion, M. Bamberger and A. Rosen: "Creep Studies of Coarse Grained AZ91D Magnesium Alloy", Materials Science and Engineering A, Vol. A252, pp (1998)

5 4. M. Regev, E. Aghion, M. Bamberger S. Berger and A. Rosen: "Dislocation Analysis of Crept AZ91D Ingot Casting", Materials Science and Engineering A, Vol. A257, pp (1998) 5. M. Regev, O. Botstein, M. Bamberger and A. Rosen: "Continuous vs. Interrupted Creep in AZ91D Magnesium Alloy", Materials Science and Engineering A, Vol. A302/1, pp (2001) 6. M. Regev, A. Rosen and M. Bamberger: "Qualitative Model for Creep of AZ91D Magnesium Alloy", Metallurgical and Materials Transactions A, Vol. 32A, pp (2001) 7. S. Spigarelli, M. Regev, E. Evangelista and A. Rosen: "A Review of the Creep Behavior of AZ91 Mg Alloy Produced by Different Technologies", Materials Science and Technology, Vol. 17, pp (2001) 8. M. Regev, H. Rosenson and Z. Koren: "Microstructure Study of Particle Reinforced AZ91D and AM50 Magnesium Alloys Semisolid Casting", Materials Science and Technology, Vol. 23, pp (2007) 9. U. Ben-Hanan, H. Judes and M. Regev: "Comparative Study of Three Different Types of Dental Diamond Burs", Tribology - Materials, Surfaces & Interfaces, Vol. 2, pp (2008) 10. A. Katz-Demyanetz, H. Rosenson, Z. Koren and M. Regev: "Bulk Metallic Glass Formation in the Mg80Cu15Y5 System", Materials Science and Technology, Vol. 25, pp (2009) 11. M. Regev, H. Judes and U. Ben-Hanan: "Wear Mechanisms of Diamond Coated Dental Burs", Tribology - Materials, Surfaces & Interfaces, Vol. 4, pp (2010) 12. M. Regev, H. Rosenson, Z. Koren and A. Katz-Demyanetz: "The Influence of the Cooling Rate on Bulk Metallic Glass Formation in Mg80Cu15Y5 and Mg80Cu10Y10 ", Journal of Materials Science, Vol. 45, pp (2010) 13. S. Spigarelli, M. El Mehtedi and M. Regev: "Enhanced Plasticity and Creep in an Extruded ZK60 Alloy", Scripta Materialia, Vol. 63, pp (2010) 14. M. Cabibbo, P. Ricci and M. Regev: "Nanoindentation Applied to an Optimized FSW-AZ31 Butt Joint", Kovove Materialy - Metallic Materials, Vol. 49, pp (2011) 15. A. Katz-Demyanetz, H. Rosenson, Z. Koren and M. Regev: "Thermal Stability and DSC Studies of Melt-spun Mg80Cu15Y5 and Mg80Cu10Y10", Journal of Materials Science and Engineering A (formerly part of Journal of Materials Science and Engineering), Vol. 1 pp (2011) 16. S. Spigarelli, M. El Mehtedi and M. Regev: "Effect of Grain Size on High Temperature Deformation of AZ31 alloy", Materials Science and Engineering A, Vol. 528, pp (2011) 17. S. Spigarelli, M. Regev, M. El. Mehtedi, G. Quercetti and M. Cabibbo: "Analysis of the Effect of Friction Stir Welding on the Minimum Creep Rate of a Mg-3%Al-1%Zn Alloy", Scripta Materialia, Vol. 65, pp (2011) 18. S. Spigarelli, M. El Mehtedi, M. Regev and E. Gariboldi: "High Temperature Creep and Superplasticity in a Mg-Zn-Zr Alloy", Journal of Materials Science and Technology, Vol. 28, pp (2012) 19. U. Ben-Hanan, M. Regev and H. Judes: "Temperature Measurements During Dental Cutting Using an Internally Cooled Diamond Dental Bur", Journal of Materials Science and Engineering B Vol. 2, pp (2012)

6 20. M. Regev and S. Spigarelli: "Plastic Deformation Mechanisms of Base Material and Friction Stir Welded AZ31B-H24 Magnesium Alloy", Materials Sciences and Applications, Vol. 4, pp (2013) 21. M. Regev, M. El Mehtedi, M. Cabibbo, G. Quercetti, D. Ciccarelli and S. Spigarelli: "High Temperature Plasticity of Bimetallic Magnesium a nd Aluminum Friction Stir Welded Joints", Metallurgical and Materials Transactions A, Vol. 45A, pp (2014) 22. M. Regev, S. Spigarelli and M. Cabibbo: "Microstructure Stability During Creep of Friction Stir Welded AZ31B Magnesium Alloy", ASME Journal of Manufacturing Science and Engineering, Vol. 137, pp (2015) 23. M. Regev, S. Essel and A. Katz-Demyanetz: "Microstructure Characterization of Melt Spun Mg65Cu25Y10", Kovove Materialy - Metallic Materials, Vol. 55, pp. 1-5 (2017) 24. N. Larianovsky, A. Katz-Demyanetz, E. Eshed and M. Regev: "Microstructure, Tensile and Creep Properties of Ta20Nb20Hf20Zr20Ti20 High Entropy Alloy", Materials, Vol. 10, pp (2017) 25. M. Regev, T. Rashkovsky, M. Cabibbo and S. Spigarelli: "Microstructure Stability During Creep of Friction Stir Welded AA2024-T3 Alloy", Journal of Materials Engineering and Performance, Vol. 27, pp (2018) 26. C. Paoletti, M. Regev and S. Spigarelli: "Modelling of Creep in Alloys Strengthened by Rod-Shaped Particles: Al-Cu-Mg Age-Hardenable Alloys", Metals, Vol. 8, pp (2018) Refereed Conference Proceedings: 1. M. Regev, E. Aghion, M. Bamberger and A. Rosen: "Creep Studies of AZ91D Castings", Proceedings of DGM International Conference on Magnesium Alloys and Their Applications, pp (1998) 2. M. Regev, A. Rosen and M. Bamberger: "Structural Stability and Creep Properties of AZ91", Proceedings of the 1999 Annual Meeting, San Diego, California, pp (1999) 3. M. Regev, D. Kalinka and S. Spigarelli: "Deformation Mechanisms Operating During Creep of Friction Stir Welded AZ31B Magnesium Alloy", Conference Proceedings of the 9 th International Conference on Magnesium Alloys and Their Applications, Vancouver, Canada, ISBN number , pp (2012) 4. M. Regev and S. Spigarelli: "Plastic Deformation Mechanisms Operating in Parent Metal and Friction Stir Welded AZ31B Magnesium Alloy", Conference Proceedings of the 7 th Asia Pacific IIW International Conference, Singapore, pp (2013) 5. M. Regev and S. Spigarelli: "Microstructure Stability During Creep of Friction Stir Welded AZ31B-H24 Magnesium Alloy and AA2024-T3 Aluminum Alloy", Proceedings of IIW 2017 International Conference, Shanghai, P.R. China, pp. F13-F20 (2017) Other Conference Proceedings: 1. A. Finkel, M. Regev, E. Aghion, M. Bamberger and A. Rosen: "Aging Studies of AZ91D Casts", Proceedings of The First Israeli International Conference on Magnesium Science & Technology, Dead Sea, Israel, pp (1997) 2. S. Spigarelli, M. Cabibbo, E. Evangelista, M. Regev and A. Rosen: "Process and

7 Microstructural Effects on the Creep Properties of the AZ91 Magnesium Alloy", Proceedings of the Second Israeli International Conference on Magnesium Science and Technology, Dead Sea, Israel, pp (2000) 3. M. Regev, O. Botstein and A. Rosen: "The Influence of the Microstructure on the Creep Properties of AZ91D Magnesium Alloy Continuous vs. Interrupted Creep", Proceedings of the Second Israeli International Conference on Magnesium Science and Technology, Dead Sea, Israel, pp (2000) Other Publications: 1. M. Regev: "Fire-side Corrosion in Coal Fired Steam Boilers of Power Plants", Mechonot, Nov. 1992, pp. 5-7 (in Hebrew) 2. M. Regev: "Creep Mechanisms in Steam Boiler Tubes Made of T22 Steel", Mechonot, Mar. 1994, pp (in Hebrew) 3. M. Regev and O. Botstein: "Scanning Electron Microscopy and its Applications for Researchers and Engineers", Mechonot, Jun. 1999, pp (in Hebrew) Technical Reports: 1. "Friction Stir Welding Review", submitted to RAFAEL Report No. 2004/M2/001, February 2004 (in Hebrew) 2. "Development of Nano/Sub-micron Particle Reinforced Light Alloys", submitted to the Israel Institute of Metals, October 2006 (in Hebrew) 3. M. Regev, U. Ben-Hanan: "Comparative Examination of Three Different Types of Dental Burs", submitted to Strauss & Co., November 2006 (in Hebrew) 4. "Development of Nano/Sub-micron Particle Reinforced Light Alloys", submitted to the Israel Institute of Metals, December 2006 (in Hebrew) 5. U. Ben-Hanan, M. Regev: "Grinding Zirconia Comparative Study of Three Different Types of Dental Burs", submitted to Strauss & Co., November 2009 (in Hebrew) Conference Presentations: 1. May 30, The 30 th Annual Meeting of the Israel Society for Microscopy, Haifa, Israel 2. October 22, The National Welding Conference, Shfaim, Israel 3. April 16-17, The Eighth Israel Materials Engineering Conference IMEC VIII, Beer-Sheva, Israel 4. August 25-29, Eleventh International Conference on the Strength of Materials - ICSMA-11, Prague, Czech Republic 5. November 10-12, The First Israeli International Conference on Magnesium Science & Technology, Dead Sea, Israel 6. April 28-30, Magnesium Alloys and Their Applications Conference, Wolfsburg, Germany 7. December 6-7, The Ninth Israel Materials Engineering Conference IMEC IX, Haifa, Israel

8 8. February 22-24, The Second Israeli International Conference on Magnesium Science & Technology, Dead Sea, Israel 9. May 10-11, 2006 The 7 th Israeli Conference on Corrosion and Electrochemistry, Bar- Ilan University, Ramat-Gan, Israel 10. July 11-12, The 2 nd Ort Braude College Interdisciplinary Research Conference, Ma alot, Israel 11. September 10-11, 2007 EUROMAT 2007, Nürnberg, Germany 12. October 8-9, The 3 rd Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel 13. December 9-10, 2007 The 13 th Israel Materials Engineering Conference IMEC 13, Haifa, Israel 14. October 22-23, The 4 th Ort Braude College Interdisciplinary Research Conference, Nazareth Ilit, Israel 15. September 7-10, 2009 EUROMAT 2009, Glasgow, UK 16. October 14-15, The 5 th Ort Braude College Interdisciplinary Research Conference, Nahariya, Israel 17. December 13-14, The 14 th Israel Materials Engineering Conference IMEC14, Tel-Aviv, Israel (presented by Dr. A Katz) 18. April 21-23, 2010 IWNCS 2010, Barcelona, Spain 19. October 13-14, The 6 th Ort Braude College Interdisciplinary Research Conference, Haifa, Israel 20. January 26-28, 2011 CIRP winter meeting, Paris, France (presented by Dr. U. Ben- Hanan) 21. September 19-20, The 7 th Ort Braude College Interdisciplinary Research Conference, Kfar-Blum, Israel 22. January 25-27, CIRP winter meeting, Paris, France (presented by Dr. R. Wertheim) 23. July 8-12, th International Conference on Magnesium Alloys and their Applications, Vancouver, BC, Canada 24. October 17-18, The 8 th Ort Braude College Interdisciplinary Research Conference, Acre, Israel 25. July 8-10, 2013 The 7 th Asia Pacific IIW International Conference, Singapore 26. October 2-3, The 9 th Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel 27. December 2-6, 2013 THERMEC 2013, Las Vegas, USA (invited talk) 28. May 20-22, th FSW Symposium, Beijing, China 29. October 19-20, The 10 th Ort Braude College Interdisciplinary Research Conference, Nahariya, Israel 30. March 22-25, BIT's 1 st Annual World Congress of Smart Materials, Busan, Republic of Korea (including chairmanship) 31. October 7-8, The 11 th Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel 32. May 29-June 3, THERMEC 2016, Graz, Austria (invited talk) 33. September 28-29, The 12 th Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel

9 34. June 29-30, 2017 IIW 2017, Shanghai, P.R. China 35. September 17-21, 2017 EUROMAT 2017, Thessaloniki, Greece (keynote lecture) 36. October 25-26, The 13 th Ort Braude College Interdisciplinary Research Conference, Nahsholim Seaside Resort, Israel 37. July 8-13, THERMEC 2018, Paris, France (invited talk) 38. October 17-18, The 14 th Ort Braude College Interdisciplinary Research Conference, Kfar-Blum, Israel