SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AKRON RUBBER DEVELOPMENT LABORATORY, INC Gilchrist Road Akron, OH Rick Behne Phone: MECHANICAL Valid To: January 31, 2020 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory as well as the 2 satellite laboratory locations listed below to perform the following tests on rubber, plastics, textiles, latex, condoms, adhesives, sealers and adhesive tapes: CONDITIONING ASTM D618 ASTM D832 UL2703 (Sections & Figure 8.1) Conditioning of Plastics for ing Rubber Conditioning for Low Temperature ing Conditioning Polymeric Materials for ing ABRASION ASTM C1353 ASTM D1630 ASTM D2228 ASTM D3389 ASTM D4060 ASTM D5963 ASTM F1319 DIN (Withdrawn in 2014) BS ISO 4649 DIN ISO 4649 ISO 4649 Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser Rubber Property Abrasion Resistance (Footwear Abrader) Rubber Property Relative Abrasion Resistance by Pico Abrader Method Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) Abrasion Resistance Organic Coatings by the Taber Abraser Rubber Properties Abrasion Resistance (Rotary Drum Abrader) Standard for determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method) Determination of Abrasion Resistance Rubber, Vulcanized or Thermoplastic Determination of Abrasion Resistance using a Rotating Cylindrical Drum Device Determination of Abrasion resistance using a rotating cylindrical drum device Determination of Abrasion resistance using a rotating cylindrical drum device (A2LA Cert. No ) Revised 03/04/2019 Page 1 of 20

2 ABRASION (continued) Ford FLTM BN GM9033P-86 2 (Withdrawn in 2013) GMW (Withdrawn in 2016) ISO SAE J861 ASTM D3884 Chrysler LP-463PB ISO 105-X12 Crocking Interior Trim Materials for Determining Color fastness to Crocking (Rubbing) Pile Distortion (Crockmeter Method) Colour Fastness to Crocking: Textiles and Leather Method of ing Resistance to Crocking of Organic Trim Materials Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) Crock Mar Resistance Determining Abrasion Resistance of Color Textiles ELECTRICAL ASTM D150 ASTM D257 ASTM D991 ASTM D876 (Sections 59, 60 and 62) AC Loss Characteristics and Permittivity (Dielectric Constant of Solid Electrical Insulation DC Resistance or Conductance of Insulating Materials Volume Resistivity of Electrically Conductive and Antistatic Products Volume resistivity-non rigid vinyl fluoride polymer tubing used for electrical insulation EXPOSURE TESTING Accelerated Aging and Heat Resistance ASTM D454 ASTM D572 ASTM D573 ASTM D (Withdrawn 1998) ASTM D865 ASTM D (Parts 15-16) (Withdrawn in 2014) ASTM D3045 ASTM D3574 ( J) ASTM D3574 ( K) DIN ISO 188 JIS K6257 SAE J2236 Rubber Deterioration by Heat and Air Pressure Rubber Deterioration by Heat and Oxygen Rubber Deterioration in an Air Oven Determining Permanent Effect of Heat on Plastics Rubber Deterioration by Heating in Air ( Tube Enclosure) Accelerated Aging s Heat Aging of Plastics Without Load Flexible Cellular Materials Slab, Bonded, and Molded Urethane Foams Steam Autoclave Aging Flexible Cellular Materials Slab, Bonded, and Molded Urethane Foams Dry Heat Aging Accelerated Ageing of Rubber Rubber, vulcanized or thermoplastic Accelerated Ageing and Heat Resistance s Rubber, Vulcanized or Thermoplastic Determination of Heat Ageing Properties Determining Continuous Upper Temperature Resistance of Elastomers (A2LA Cert. No ) Revised 03/04/2019 Page 2 of 20

3 LOW TEMPERATURE ASTM C765 ASTM D746 ASTM D1329 ASTM D2137 Low Temperature Flexibility of Preformed Tape Sealants Brittleness Temperature of Plastics and Elastomer by Impact Evaluating Rubber Property Retraction at Lower Temperatures (TR ) Rubber Property Brittleness Point of Flexible Polymers and Coated Fabrics ISO 812 Rubber, Vulcanized or Thermoplastic Determination of Low Temperature Brittleness JIS K6261 Withdrawn Rubber, Vulcanized or Thermoplastic Determination of Low Temperature Properties JIS K JIS K JIS K JIS K ULTRAVIOLET FLUORESCENT LAMPS/XENON General Introduction and Guide: Determination of low temperature properties Low temperature Brittleness Low temperature stiffness Low temperature retraction AATCC 186 ASTM C793 (Except Carbon-Arc) ASTM C1257 ASTM D750 ASTM D904 (Method A) ASTM D1148 ASTM D1670/D1670M ASTM D2565 ASTM D3424 (Except Method 2) ASTM D4329 ASTM D4587 ASTM D4674 (Method IV) ASTM D4799 Weather Resistance: UV Light and Moisture Exposure Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants Accelerated Weathering of Solvent-Release-Type Sealants Rubber Deterioration Using Artificial Weathering Apparatus Rubber Deterioration Using Artificial Weathering Apparatus Rubber Deterioration-Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces and Xenon-Arc Apparatus Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials Xenon-Arc Exposure of Plastics Intended for Outdoor Applications Evaluating the Relative Lightfastness and Weatherability of Printed Matter Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics Fluorescent UV-Condensation Exposures of Paint and Related Coatings Accelerated ing for Color Stability of Plastics Exposed to Indoor Office Environments Accelerated Weathering Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) (A2LA Cert. No ) Revised 03/04/2019 Page 3 of 20

4 ULTRAVIOLET FLUORESCENT LAMPS/XENON (continued) ASTM D5208 ASTM D5215 ASTM D6662 (Section 6.3) ASTM D6754 (Section 8.15) ASTM G151 ASTM G153 ASTM G154 Fiat Ford WSB-M3G 102B/B (Withdrawn in 2007) GM (Withdrawn in 2013) Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives Polyolefin-Based Plastic Lumber Decking Boards Ketone Ethylene Ester Based Sheet Roofing Exposing Nonmetallic Materials in Accelerated Devices that Use Laboratory Light Sources Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials Alternating Ultraviolet Radiation/humidity Resistance Staining: Low Density Polyvinyl Chloride Foam Pressure Sensitive, Supersoft/Tape, Low Density Polyvinyl Chloride/Nitrile Foam Pressure Sensitive, Ultra Soft Procedures for Laboratory Accelerated Exposure of Automotive Materials ISO Methods of Exposure to Laboratory Light Sources Fluorescent UV Lamps JIS K Methods of Exposure to Laboratory Light Sources Part 3: Fluorescent UV Lamps MIL-DTL-85052B (Section ) Navistar MPAPS GT-31 (2014) Polaris ENG-TST , Section 4.5 (2011) SAE J2020 AATCC 16 (Options 3, 4, & 5) AATCC 169 (Cycle 1-4) ASTM C1442 ASTM D4459 ASTM D4637/D4637M (Sections 8.19 & 8.20) ASTM D4798/D4798M ASTM D5071 ASTM D6695 General Specification for Clamp, Loop, Cushion: Ultraviolet Exposure Accelerated Weathering of Non-Metallic Materials UV Procedure Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus Colorfastness to Light Weather Resistance of Textiles Xenon Arc Exposure Conducting s on Sealants Using Artificial Weathering s Xenon-Arc Exposure of Plastics Intended for Indoor Applications Weather Resistance of EPDM Sheet Used in Single- Ply Roof Membrane Accelerated Weathering Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) Exposure of Photodegradable Plastics in a Xenon Arc Apparatus Xenon-Arc Exposure of Paint and Related Coatings (A2LA Cert. No ) Revised 03/04/2019 Page 4 of 20

5 ULTRAVIOLET FLUORESCENT LAMPS/XENON (continued) ASTM D6754/D6754M ASTM D6878/D6878M (Section 7.13) ASTM D7869 ASTM F1515 (Water Cooled Xenon Only) ASTM G26-96 (Withdrawn in 2000) ASTM G147 ASTM G155 Boeing BMS 1-57L-2011 (Section 8.10) Fiat (Method A) Ford FLTM BO Ford ESB-M9P4-A (Withdrawn) GM9902P-96 Withdrawn GME (Withdrawn in 2016) GMW 3414 GMW (Methods A, B or D) GMW 14650, 4.11 GMW 14743, Table 1 GMW Honda HES D (Sections b & ) Honda HES D A Hyundia/Kia MS (2006) (Section 4.5) ISO 105-B02 ISO105-B01 ISO 105-B06 (Conditions 3, 4, 5 or 6) ISO 3865 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing Weather Resistance of Thermoplastic Polyolefin Based Roofing Xenon Arc Exposure with Enhanced Light and Water Exposure for Transportation Coatings Measuring Light Stability of Resilient Flooring by Color Change Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering s Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials Weather Resistance Silicon Rubber, Extreme Low Temperature Resistant Accelerated Aging by Atmospheric Agents Resistance to Interior Weathering Rubber Parts Migration Staining Against Paint Noncontact Staining Measurement of Elastomers (Xenon-Arc) Determination of Colour Fastness and Resistance to Artificial Light Artificial Weathering of Automotive Interior Trim Materials Colorfastness to Artificial Weathering Compatibility Elastomer for Wiper Blades Paint Staining Non Contact Staining Light Resistance/Weather Resistance Resin Materials for Vehicles Accelerated for Light Resistance with Xenon-Arc Lamp Fading Resistance Molded Plastic Parts (Interior Use) Colour Fastness to Artificial light: Xenon Arc Fading Lamp Color fastness to Daylight Colour Fastness and ageing to Artificial Light at High Temperatures: Xenon Arc Fading Lamp Rubber, Vulcanized or Thermoplastic Methods of for Staining in Contact with Organic Material ISO Methods of Exposure to Laboratory Light Sources General Guidance ISO Methods of Exposure to Laboratory Light Sources Xenon-Arc Lamps (A2LA Cert. No ) Revised 03/04/2019 Page 5 of 20

6 ULTRAVIOLET FLUORESCENT LAMPS/XENON (continued) ISO (Withdrawn) ISO ISO JASO M 305 (Section 5.14) JASO M 346 JASO M351 JIS B 7754 MIL-STD-810G Method 506 (Procedure 11 Only) Nissan NES M0135 (Except 1-II-1B and 1-II-3 Using Air Cooled Xenon Lamps) (2008 Only) PSA Peugeot Citroen D Renault D D-07 SAE J (Withdrawn in 2008) SAE J (Withdrawn in 2008) SAE J2027 (Section 5.2.8) SAE J2412 SAE J2527 Suzuki SES N Methods WAL-2 & WAN-2 Toyota TSL 3610G Rev 9 Sept PARA Toyota TSH1585G-10 (Except Types IV & V) Toyota TSL0601G-11 (Methods B & E) Toyota TSM0501G-03 (Section 9.20 with Atlas Ci65 or Equivalent) UL758 (Section 17) Paints and Varnishes Artificial Weathering and Exposure to Artificial Radiation Exposure to Filtered Xenon-Arc Radiation Paints and Varnishes Methods of Exposure to Laboratory Light Sources Xenon-arc Lamps Rubber and Plastics Hoses Methods of Exposure to Laboratory Light Sources Determination of Changes in Colour, Appearance and Other Physical Properties Weatherstrips for Automobiles Weatherability Light-Exposure by Xenon-Arc Lamp for Automotive Interior Part Automotive Parts Accelerated Weathering ing Method by Xenon-Arc Lamp for Exterior Parts Light-Exposure and Light-and-Water-Exposure Apparatus (Xenon-arc Lamp Type) Determining the Effects of Solar Radiation on Material Weatherability and Light Resistance s for Synthetic Resin Parts Paint Coatings Rubbers and Plastics Artificial Weathering by Weatherometer Rubbers and Plastic, Paint Coatings Artificial Ageing Using a Weatherometer Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus Standard for Protective Covers for Gasoline Fuel Line Tubing, Chemical Resistance (Xenon-Arc) Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus s of Weatherability and Light Resistance for Plastic Parts Light Resistance Xenon-Arc Lamp Type Methods for Accelerated Weathering Resistance of Paint Film Criteria for for Quality of Color Change by Aging Accelerated Weather (Light) Resistance Physical Properties of Insulation and Jacket, Sunlight Resistance (A2LA Cert. No ) Revised 03/04/2019 Page 6 of 20

7 ULTRAVIOLET FLUORESCENT LAMPS/XENON (continued) UL 1581 (Section 1200) UL 2556 (Section ) VW PV VW PV VW PV Yamaha YGK (2008) Yamaha YGK (2016) Sunlight Resistance Weather (Sunlight) Resistance Exposure of Passenger Compartment Components Non-Metallic Materials: Weathering in Dry, Hot Climate Non-Metallic Materials: Weathering in Moist, Hot Climate Painting Accelerated Weatherability Xenon Arc Lamp Weathering ADHESION AFG ASTM D903 ASTM D2229 ASTM D3359 ASTM D3498 Adhesive for Field-Gluing Plywood to Wood Framing Peel or Stripping Strength of Adhesive Bonds Standard for Adhesion Between Steel Tire Cords and Rubber Measuring Adhesion by Tape Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems CHEMICAL RESISTANCE ASTM D471 ASTM D543 ASTM D6284 DIN (Withdrawn in 1999) DIN ISO 1817 JIS K6258 ISO 1817 ASTM F146 GMW14334 NES M Rubber Property Effect of Liquids Evaluating the Resistance of Plastics to Chemical Reagents Rubber Property Effect of Aqueous Solutions with Available Chlorine and Chloramine Determination of the Behavior of Rubber and Elastomers when Exposed to Fluids And Vapours Determination of the effect of liquids Rubber, Vulcanized or Thermoplastic Determination of the Effect of Liquids Rubber, Vulcanized or Thermoplastic Determination of the Effect of Liquids Fluid Resistance of Gasket Material Chemical Resistance to Fluids ing methods of chemical resistance for plastic parts (A2LA Cert. No ) Revised 03/04/2019 Page 7 of 20

8 COLOR AATCC EP-1 ASTM D1003 ASTM D2244 ASTM E313 ASTM E1164 ASTM E1331 ISO 105/A02 ISO 105/A04 ISO 4582 JIS L0804 SAE J1545 Grey Scale for Color Change Haze and Luminous Transmittance of Transparent Plastics Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates Obtaining Spectrometric Data for Object-Color Evaluation Reflectance Factor and Color by Spectrophotometry Using a Hemispherical Geometry Grey Scale for Assessing Change in Colour Method for the Instrumental Assessment of the Degree of Staining of Adjacent Fabrics Determination of Changes in Colour and Variations in Properties after Exposure to Daylight under Glass, Natural Weathering or Laboratory Light Sources Grey scale for assessing change in Color Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim COMPRESSION ASTM D395 ASTM D575 ASTM D623 Method A only ASTM D695 ISO 604 ASTM D790 ASTM D945 ASTM D1055 (17-19) 2009 (Withdrawn in 2014) ASTM D1055 (24-26) 2009 (Withdrawn in 2014) ASTM D1055 (27-30) 2009 (Withdrawn in 2014) ASTM D1229 ASTM D3574 ( C) ASTM D3574 ( D) ASTM D3575 (Section 9-16) ASTM D3575 (Section 17-24) ASTM F1342 (Procedure A) Compression Set Rubber Properties in Compression Heat Generation and Flexing Fatigue in Compression Compressive Properties of Rigid Plastics Compressive Properties of Rigid Plastics Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials Rubber Properties in Compression or Shear (Mechanical Oscillograph) Compression Set Under Constant Deflection Flexing (Suffix H) Low-Temperature (Compression/Deflection) Compression Set at Low Temperatures Compression Force Deflection Constant Deflection Compression Set Flexible Cellular Materials Made from Olefin Polymers Compression Set Under Constant Deflection Flexible Cellular Materials Made from Olefin Polymers Compression Deflection Protective Clothing Material Resistance to Puncture (A2LA Cert. No ) Revised 03/04/2019 Page 8 of 20

9 COMPRESSION (continued) ISO 178 ISO ISO ISO (Withdrawn in 1993) ISO DIN EN ISO JIS K6262 ASTM D4014 ASTM D1667 (Parts 16-20) ASTM D1667 (Parts 21-25) Determination of Flexural Properties Determination of Compression Set at Ambient or Elevated Temperatures Determination of Compression Set at Low Temperatures Vulcanized Rubbers - Determination of Compression Set under Constant Deflection at Low Temperatures Determination of stress strain characteristics in compression-low density materials Determination of stress strain characteristics in compression-low density materials Rubber, Vulcanized or Thermoplastic Determination of Compression Set at Ambient, Elevated or Low Temperatures Shear Modulus and Related ing for Elastomeric Bridge Bearings Compression Deflection Compression Set Under Constant Deflection CONDOM TEST ASTM D3492 ASTM D6324 ARDL 2139 BS (Withdrawn) ISO 4074 Except annex G and section M.3 BS EN ISO 4074 Except annex G and section M.3 WHO Male Latex Condom ASTM D7661 Rubber Contraceptives (Male Condoms) Male Condoms Made from Polyurethane Lubricant ing on Condoms Natural Rubber Latex Male Condoms Natural Rubber Latex Male Condoms Requirements and s Natural Rubber Latex Male Condoms Requirements and s The Male Latex Condom Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms CORROSION EVALUATION ASTM D610 ASTM D1654 SAE J1389 Evaluating Degree of Rusting on Painted Steel Surfaces Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments Corrosion for Insulation Materials CRACK RESISTANCE ASTM D813 ASTM D1693 Rubber Deterioration Crack Growth Environmental Stress Cracking of Ethylene Plastics (A2LA Cert. No ) Revised 03/04/2019 Page 9 of 20

10 DIMENSIONAL STABILITY ASTM D1204 ASTM D3575 Suffix S (Sections 35-42) ASTM D3767 Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperatures Flexible Cellular Materials Made from Olefin Polymers Thermal Stability Rubber Properties Measurement of Dimensions DENSITY ASTM D792 Density and Specific Gravity of Plastics by Displacement ASTM D1667, X3 Suggested for Density (Suffix W) ASTM D1622/D1622M Standard method for Apparent Density of Rigid Cellular Plastics ASTM D3574 ( A) Density Urethane Foams ASTM D3575 (Suffix W) Density Flexible Cellular Materials Made from Olefin Polymers EXTENSION CYCLING FATIGUE/CUT GROWTH ASTM D430 ASTM D1052 ASTM D4482 Rubber Deterioration Dynamic Fatigue Measuring Rubber Deterioration Cut Growth Using Ross Flexing Apparatus Rubber Property Extension Cycling Fatigue FLAMMABILITY ASTM C1166 ASTM D635 ASTM D3801 ASTM D5132 USDOT FMVSS IEC ISO 3795 SAE J369 UL94 VW TL Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles Flammability of Interior Materials Passenger Cars, Multipurpose Passenger Vehicles, Trucks and Buses 50W Horizontal and Vertical Flame s Determination of Burning Behavior of Interior Materials Flammability of Polymeric Interior Materials Horizontal Flammability of Plastic Materials for Parts in Devices and Appliances Burning Behavior Materials used in Vehicle Interiors (A2LA Cert. No ) Revised 03/04/2019 Page 10 of 20

11 FOGGING CHARACTERISTICS Chrysler LP-463DB Withdrawn GMW 3235 SAE J1756 ASTM D1735 Fogging Resistance of Interior Materials Fogging Characteristics of Trim Materials Determination of the Fogging Characteristics of Interior Automotive Materials Standard Practice for ing Water resistance of Coatings Using Water Fog Apparatus FRICTION PROPERTIES ASTM D1894 Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting GLOSS (20 /60 /85 ) ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products ASTM D523 Specular Gloss ASTM D Specular Gloss of Emulsion Floor Polish ASTM D4039 Reflection Haze of High-Gloss Surfaces Federal Standard 141D (Methods 60, 85, 20 Specular Gloss , 6103 &6104 only) Ford FLTM BI Measurement of Gloss Change of Flat Enamels after Polishing Ford FLTM BI Measurement of the Gloss of Paint Panels Honda HES D (Section Gloss 3.10 only) JIS Z 8741 Specular Glossiness ISO 2813 Gloss values at 20, 60, 85 (A2LA Cert. No ) Revised 03/04/2019 Page 11 of 20

12 GLOVE TESTING ASTM D120 ASTM D3577 ASTM D3578 ASTM D5151 ASTM D5250 ASTM D6124 ASTM D6319 ASTM D6977 ASTM D7198 ARDL 2140 BS EN BS EN Rubber Insulating Gloves Rubber Surgical Gloves Rubber Examination Gloves Detection of Holes in Medical Gloves Poly (Vinyl Chloride) Gloves for Medical Application Residual Powder on Medical Gloves Nitrile Examination Gloves for Medical Application Polychloroprene Examination Gloves for Medical Application Disposable Embalming Gloves for Single-Use Applications Lubricant ing on Gloves Medical Gloves for Single Use Requirements and ing for Freedom from Holes Medical Gloves for Single Use Requirements and ing for Physical Properties HARDNESS ASTM D2583 ASTM D2240 (Types A, D, M, and OO) DIN (Withdrawn in 2012) ISO 868 (Types A and D) DIN ISO JIS K M and CM only ASTM D1415 ISO 48 M and CM only ASTM D785 (Scale R) Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor Rubber Property Durometer Hardness Shore A and Shore D Hardness ing of Rubber Plastics and Ebonite Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) Rubber, Vulcanized or Thermoplastic-Determination of Indentation Hardness Rubber, Vulcanized or Thermoplastic Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD) Rubber Property International Hardness Rubber, Vulcanized or Thermoplastic Determination of Hardness (Hardness between 10 IRHD and 100 IRHD) Rockwell Hardness of Plastics and Electrical Insulating Materials (A2LA Cert. No ) Revised 03/04/2019 Page 12 of 20

13 HDT/VICAT SOFTENING POINT ASTM D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ASTM D1525 (Rate B) Vicat Softening Temperature of Plastics ISO 75-1 Determination of Temperature of Deflection under Load General ISO 75-2 Determination of Temperature of Deflection under Load Plastics and Ebonite ISO 75-3 Determination of Temperature of Deflection under Load High-Strength Thermosetting Laminates and Long-Fibre- Reinforced Plastics ISO 306 (Method A120) Determination of Vicat Softening Temperature IMPACT ASTM D256 ASTM D4226 ASTM D4812 ASTM D5420 ISO ISO 180 Determining the Izod Pendulum Impact Resistance of Plastics Impact Resistance of Rigid Poly(Vinyl Chloride) Building Products Unnotched Cantilever Beam Impact Resistance of Plastics Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Hammer (Gardner Impact) Determination of Charpy Impact Properties Determination of Izod Impact Strength INJECTION MOLDING TEST SPECIMENS ASTM D3641 Injection Molding Specimens of Thermoplastics Molding and Extrusion Materials MELT FLOW ASTM D1238 ASTM D3364 ISO Melt Flow Rates of Thermoplastics by Extrusion Plastometer Flow Rates for Poly (Vinyl Chloride) with Molecular Structure Implications Determination of the Melt Mass Flow Rate (MFR) and Melt Volume-Flow Rate (MVR) of Thermoplastics (A2LA Cert. No ) Revised 03/04/2019 Page 13 of 20

14 ODOR TESTING Delphi SD2-208 (Section 5.3.2) 2012 GMW 3205 GMW SAE J1351 VDA 270 Odor Determining the Resistance to Odor Propagation of Interior Materials Compatibility of Interior Trim Materials with Amines Hot Odor for Insulation Materials Determination of odor characteristics of trim materials OZONE TESTING ASTM D (Withdrawn in 2008) ASTM D1149 ASTM D1171 ASTM D (Withdrawn in 2008) DIN (Withdrawn in 2011) ISO Ford BP FMVSS 106 TP-106 April 2008 (sections 12.A.13 & 12.B.6 SAE J1401 Section & GM4486P-1995 (Withdrawn in 2011) Rubber Deterioration Surface Cracking Rubber Deterioration Cracking in an Ozone Controlled Environment Rubber Deterioration Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) Rubber Deterioration Dynamic Ozone Cracking in a Chamber Resistance of rubber to ozone cracking Rubber, Vulcanized or Thermoplastic Resistance to Ozone Cracking Static and Dynamic Strain ing Degradation by ozone Laboratory test procedure for FMVSS 106 brake hoses Hydraulic Brake Hose Assemblies for use with nonpetroleum base hydraulic fluids for Ozone Resistance of Elastomer Compounds RESILIENCE BY REBOUND ASTM D2632 ASTM D7121 DIN ISO 4662 (Pendulum Method) Rubber Property Resilience by Vertical Rebound Rubber Property Resilience Using Schob Type Rebound Pendulum Rubber, Vulcanized or Thermoplastic Determination of Rebound Resilience Determining the Rebound Resilience of Rubber using the Schob Pendulum (A2LA Cert. No ) Revised 03/04/2019 Page 14 of 20

15 STAIN RESISTANCE AATCC Evaluation Procedure 2 ASTM D925 GM9240P-88 2 (Withdrawn 2013) BN GM9317P-1996 (Withdrawn 2017) GM9517P-88 2 (Withdrawn 2012) GM P 1995 (Withdrawn in 2014) GM 9736P-88 2 (Withdrawn 2011) GMN (Withdrawn 2014) GMN (Withdrawn 2011) GMW GMW (Withdrawn in 2011) GMW GMW GMW GMW ISO 105-G02 ISO 3865 ISO Nissan NES M (Section 18 & 19) SAE J322 SAE J1326 Grey Scale for Staining Rubber Property Staining of Surfaces (Contact, Migration, and Diffusion) Perspiration Resistance Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking Water Repellancy Resistance to Synthetic Perspiration Asphalt Staining Sulfide Dioxide Spot Resistance to Blocking Sunscreen Lotion Resistance of Interior Coatings Determination of Water Spotting Migrations Bleeding Resistance and Contact Stain Compatibility of PVC with Other Materials Dye Migration Perspiration Resistance Insect and Insect Repellant Resistance Procedure for Determining the Staining of Trim Materials Due to Sulfur Dioxide, SO 2, and Hydrogen Sulfide, H 2S Textiles s for Colour Fastness Colour Fastness to Burnt-Gas Fumes Rubber, Vulcanized or Thermoplastic Methods for Staining in Contact with Organic Materials Leather s for Colour Fastness Colour Fastness to Migration into Polymeric Material Staining/Indirect Staining Nonmetallic Trim Materials for Determining the Staining Resistance to Hydrogen Sulfide Gas for Measuring Wet Color Transfer Characteristics STIFFNESS ASTM D1053 ASTM D1388 Rubber Property Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics (Torsional Stiffness) Stiffness of Fabrics (A2LA Cert. No ) Revised 03/04/2019 Page 15 of 20

16 TENSILE TESTS ASTM D412 Vulcanized Rubber and Thermoplastic Elastomers Tension ASTM D413 Rubber Property Adhesion to Flexible Substrate ASTM D429 Rubber Property Adhesion to Rigid Substrates ASTM D624 Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers ASTM D638 Tensile Properties of Plastics ASTM D882 Tensile Properties of Thin Plastic Sheeting ASTM D1002 Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) ASTM D1004 Tear Resistance (Graves Tear) of Plastic Film and Sheeting ASTM D1708 Tensile Properties of Plastics by Use of Microtensile Specimens ASTM D3163 Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear in Shear by Tension Loading ASTM D3574 ( E) Flexible Cellular Materials Slab, Bonded, and Molded Urethane Foams Tensile ASTM D3574 ( F) Flexible Cellular Materials Slab, Bonded, and Molded Urethane Foams Tear ASTM D (Withdrawn in 2008) Tearing Strength of Nonwoven Fabrics by Falling- Pendulum (Elmendorf) Apparatus ASTM D (Withdrawn in 2009) Tearing Strength of Nonwoven Fabrics by the Tongue (Single Rip) Procedure ASTM F152 Tension ing of Nonmetallic Gasket Materials DIN Determination of Tensile Strength ISO 34-1 Rubber, vulcanized or thermoplastic Determination of Tear Strength Trouser, Angle and Crescent Pieces ISO 34-2 Rubber, Vulcanized or Thermoplastic Determination of Tear Strength Small (Delft) Pieces ISO 37 Rubber, Vulcanized or Thermoplastic Determination of Tensile Stress-Strain Properties ISO Plastics Determination of Tensile Properties ISO Film and Sheeting Determination of Tear Resistance Trouser Tear Method JIS K 6251 Rubber, Vulcanized or Thermoplastic Determination of Tear Strength JIS K JIS K JIS K (Withdrawn) DIN (Withdrawn) ASTM D3137 Rubber, Vulcanized or Thermoplastic- Determination of tear strength Trouser, angle crescent pieces Rubber, Vulcanized or Thermoplastic- Determination of tear strength Small (delft) test pieces Rubber, Vulcanized or Thermoplastic Determination of Tensile Stress-Strain Properties Determination of Tear Growth Propagation Trouser Piece Standard for Rubber Property- Hydrolytic Stability (A2LA Cert. No ) Revised 03/04/2019 Page 16 of 20

17 LOW TEMPERATURE BENDING ASTM D2136 Coated Fabrics Low Temperature Bending VAPOR TRANSMISSION OF VOLATILE LIQUIDS ASTM D814 GM 214M 2003 (Withdrawn in 2013) Table 2 (3.1.3), Tables 1, 2, 3 and 4 ( ) GMW14724 Rubber Property Vapor Transmission of Volatile Liquids Engine Intake Manifold and Throttle Body Gaskets Engine Intake Manifold and Throttle Body Gaskets VOLATILE LOSS ASTM D1203 SAE J 2665 Volatile Loss of Plastics Using Activated-Carbon Method Measurement of fuel permeability of materials by the cup weight loss methods WATER ABSORPTION ASTM C121 ASTM D570 ASTM D3575 Suffix L (Sections 26-32) ISO 62 BS EN ISO 62 ASTM D1056, sections 43 to 49 ISO Annex E Water Absorption of Slate Water Absorption of Plastics Flexible Cellular Materials Made from Olefin Polymers Water Absorption Plastics Determination of Water Absorption Plastics Determination of Water Absorption Flexible Cellular Materials-Sponge or Expanded Rubber-water absorption, Flexible cellular polymeric materials-sponge and expanded cellular rubber 1 This accreditation covers testing performed at the main laboratory listed on page 1, and at the satellite laboratories listed below. (A2LA Cert. No ) Revised 03/04/2019 Page 17 of 20

18 AKRON RUBBER DEVELOPMENT LABORATORY, INC. 300 Kenmore Boulevard Akron, OH SAMPLE PREPARATION AND MOLDING ASTM D2229 ASTM D3182 ASTM D3183 ASTM D3767 ASTM D4703 ISO 293 UL 2703 (Sections 17.3, 17.4 & 17.1) Standard for Adhesion Between Steel Tire Cords and Rubber Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets Rubber Preparation of Pieces for Purposes from Products Standard Practice for Rubber Measurement of Dimensions Compression Molding Thermoplastic Materials into Specimens, Plaques, or Sheets Compression Moulding of Specimens of Thermoplastic Materials Conditioning Polymeric Materials for ing VISCOSITY ASTM D1646 Rubber Viscosity, Stress Relaxation, and Pre Vulcanization Characteristics (Mooney Viscometer) RHEOLOGY ASTM D2084 ASTM D5289 Rubber Property Vulcanization Using Oscillating Disk Cure Meter Rubber Property Vulcanization Using Rotorless Cure Meters VOLATILE MATTER ASTM D5668 (Method A) Rubber from Synthetic Sources Volatile Matter (A2LA Cert. No ) Revised 03/04/2019 Page 18 of 20

19 AKRON RUBBER DEVELOPMENT LABORATORY, INC. 75 Robinson Avenue Barberton, Ohio SAMPLE PREPARATION AND MOLDING ASTM D3183 Rubber Preparation of Pieces for Purposes from Products MISCELLANEOUS ASTM E662 Optical Smoke Density DYNAMIC TESTING ASTM D4065 ASTM D5992 SAE J1085 ISO ASTM D5024 ASTM D5026 ASTM E1640 Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures Dynamic ing of Vulcanized Rubber and Rubber- Like Materials Using Vibratory Methods ing Dynamic Properties of Elastomeric Isolators Rubber, Vulcanized or Thermoplastic-Determination of Dynamic Properties Dynamic Mechanical Properties in Compression Dynamic Mechanical Properties in Tension Standard for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited. ASTM: C923, C1115, C1173, D378, D1056, D1248, D1414, D2000, D6878 / D6878M, E308, D751 DaimlerChrysler: MS-AG-81, MS-AR-20, MS-AR-23, MS-AR-24, MS-AR-26, MS-AR-30, MS- AR-80, MS-DC-16 Ford: ESF-M4D101-A, ESF-M4D423-A, WSK-M4D695-A, WSS-M2D378-B1, WSS- M2D379-B1 Withdrawn, WSS-M2D380-B1 Withdrawn, WSS-M2D381-B1 Withdrawn, WSS-M2D382-B1Withdrawn (A2LA Cert. No ) Revised 03/04/2019 Page 19 of 20

20 GM: GM6086M Withdrawn 2012, GM7001M Withdrawn 2011, GMP.ABS.018R Withdrawn 2012, GMP.E/P.003 Withdrawn 2011, GMP.E/P.029 Withdrawn 2010, GMP.E/P.071 Withdrawn 2011, GMP.TES.012 Withdrawn 2013, GMP.EP.001 Withdrawn 2011, GMP.PE.002 Withdrawn 2011, GMP.PE.003 Withdrawn 2011, GMP.PE.004 Withdrawn 2011, GMP.PE.005 Withdrawn 2011, GMP.PE.006 Withdrawn 2016, GMP.PE.007 Withdrawn 2011, GMP.PE.009 Withdrawn 2011, GMN8423, GMN11106 Withdrawn 2010, GMW15473 Withdrawn 2015, GMW17408 ISO: JIS: K 6301:1995 (Withdrawn 1996) Underwriters Laboratory: UL746B (UL 94 Only) (A2LA Cert. No ) Revised 03/04/2019 Page 20 of 20

21 Accredited Laboratory A2LA has accredited AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical ing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 5 th day of March Vice President, Accreditation Services For the Accreditation Council Certificate Number Valid to January 31, 2020 Revised February 8, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.

22 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AKRON RUBBER DEVELOPMENT LABORATORY, INC Gilchrist Road Akron, OH Rick Behne Phone: CHEMICAL Valid To: January 31, 2020 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on rubber and plastic materials: SPECTROSCOPY ASTM D3677 ASTM D5673 (AB) ASTM D7558 ASTM E1252 ASTM F963 (Sections 8.3, A7.5.3) Identification by Infrared Spectrophotometry Elements in Water by Inductively Coupled Plasma-Mass Spectrometry Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves General Techniques for Obtaining Infrared Spectra for Qualitative Analysis Standard Consumer Safety Specification for Toy Safety CHROMATOGRAPHY ASTM D ASTM F2466 Daimler Chrysler LP-461J (Withdrawn) Ford AV GM 9009P 1 (Withdrawn) ARDL 3138 ARDL 3174 ASTM D3156 Standard for Anions in Water by Suppressed Ion Chromatography Determining Silicone Volatiles in Silicone Rubber for Transportation Applications Silicone Volatiles Determination in Silicone Rubber Determination of Percent Silica-Producing Volatiles in Silicone Rubber Adhesives/Sealers Which Cure at Room Temperature for Volatiles in Silicone Rubber Identification of Rubber Chemicals by High Performance Liquid Chromatography Residual Accelerator Analysis Rubber-Chromatographic Analysis of Antidegradants, Antioxidants, Antiozonants and Stabilizers (A2LA Cert. No ) Revised 02/26/2019 Page 1 of 6

23 CHROMATOGRAPHY (continued) ARDL 3110 ARDL 3160 Thin Layer Chromatography (TLC) Gas Chromatrograph/Mass Spectrometer and Auto Sampler DENSITY ASTM D297 (Section ) ASTM D1475 ASTM D1817 ARDL 3103 ISO (Methods A and B) ASTM D792 Rubber Products Chemical Analysis Density of Liquid Coatings, Inks and Related Products Rubber Chemicals Density Density Methods for Determining the Density of Non- Cellular Plastics Density and Specific Gravity of Plastics by Displacement GRAVIMETRIC ASTM D297 (Sections 17-29, 41-51) ASTM D2584 ASTM D5630 ASTM D2369 Rubber Products Chemical Analysis Ignition Loss of Cured Reinforced Resins Standard for Ash Content in Plastics Volatile Content of Coatings RUBBER AND FOOD CONTACT ASSESSMENT ARDL 3171 Formula Evaluation and Extractable ing 21 CFR Rubber Articles Intended for Repeated Use STATE OF CURE ARDL 3135 Vanderbilt Latex Handbook (3 rd Edition) p. 110 Crosslink Density Chloroform Coagulation MICROSCOPY ARDL 3809 ASTM D3576 ARDL 3802 ARDL 3812 ARDL 3816 ARDL 3815 ARDL 3813 ASTM D a Historical ARDL 3803 ARDL 3805 Light Optical (LOM): Carbon Black/Inorganic Filler Dispersion Light Optical (LOM): Cell Size Cellular Plastics Light Optical (LOM): Cell Size Cellular Plastics Light Optical (LOM): Failure Analysis Scanning Electron (SEM/EDX) Scanning Electron: Microdispersion of Inorganic Fillers Scanning Electron: Elemental Analysis Transmission Electron: Primary Aggregate Transmission Electron: Primary Aggregate Transmission Electron: Polymer Morphology (A2LA Cert. No ) Revised 02/26/2019 Page 2 of 6

24 POLYMER BARRIER PROPERTIES ASTM D1434 (Procedure V) ASTM D6978 ASTM F739 ASTM F1383 ISO 6529 BS EN (Withdrawn) DIN EN ASTM E96/E96M ASTM F903 ASTM F1670 Determining Gas Permeability Characteristics of Plastic Film and Sheeting Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact Protective Clothing Protection Against Chemicals Determination of Resistance of Protective Clothing Materials to Permeation by Liquids and Gases Protective Gloves Against Chemicals and Micro- Organisms Determination of Resistance to Permeation by Chemicals Determination of Material Resistance to Permeation by Chemicals Permeation by Liquid Chemical Under Conditions of Continuous Contact Water Vapor Transmission of Materials Resistance of Materials Used in Protective Clothing to Penetration by Liquids Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood THERMAL ASTM D3418 ASTM D3850 ASTM D3895 ASTM D4419 ASTM D4565 (Sections 17-18) ASTM D4591 ASTM D7426 ASTM E793 ASTM E794 Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA) Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry (DSC) Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry (DSC) Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry (DSC) Melting and Crystallization Temperatures by Thermal Analysis (A2LA Cert. No ) Revised 02/26/2019 Page 3 of 6

25 THERMAL (continued) ASTM E1269 ASTM E1356 ASTM E2160 ASTM F2625 ISO ISO ISO ASTM D5992 ASTM E1640 ISO ASTM E831 Determining Specific Heat Capacity by Differential Scanning Calorimetry (DSC) Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (DSC) Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry (DSC) Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High- Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry Plastics Differential Scanning Calorimetry (DSC) Determination of Glass Transition Temperature and Glass Transition Step Height Plastics Differential Scanning Calorimetry (DSC) Determination of Temperature and Enthalpy of Melting and Crystallization Plastics Differential Scanning Calorimetry (DSC) Determination of Characteristic Reaction Curve Temperatures and Times, Enthalpy of Reaction and Degree of Conversion Standard Guide for Dynamic ing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis Plastics Determination of Dynamic Mechanical Properties Tensile Vibration Non-Resonance Method Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ISO Plastics Thermomechanical Analysis (TMA) General Principles ISO Plastics Thermomechanical Analysis (TMA) Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature ASTM D6370 ASTM E1131 ASTM E2550 ISO ISO ISO Rubber Compositional Analysis by Thermogravimetry (TGA) Compositional Analysis by Thermogravimetry Thermal Stability by Thermogravimetric Determination of the Composition of Vulcanizes and Uncured Compounds by Thermogravimetric Rubber and Rubber Products Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry Acrylonitrile-Butadiene and Halobutyl Rubbers Determination of the Composition of Vulcanizes and Uncured Compounds by Thermogravimetric (A2LA Cert. No ) Revised 02/26/2019 Page 4 of 6

26 LEACHING FOR HALIDES AND SULFUR ASTM D512 ASTM D516 ASTM D1179 ASTM D1246 MIL-STD 2041D (SH) MIL-STD 2190 (SH) 1 (Withdrawn) ASTM D3566 (Sections ) Standard s for Chloride Ion in Water Standard for Sulfate Ion in Water Standard s for Fluoride in Water Standard for Bromide in Water Control of Detrimental Materials Non-Metallic Seal Materials Rubber Determination of Bromine in the Presence of Chlorine by Oxygen Combustion CARBON BLACK ASTM D1510 (Method A) ASTM D2414 ASTM D1506 ASTM D1618 ASTM D1508 ASTM D1514 ASTM D1513 ASTM D1512 ARDL 3187 Iodine Adsorption Number Oil Absorption Number (OAN) Ash Content Transmittance of Toluene Extract Pelleted Fines and Attrition Sieve Residue Pour Density Pelleted ph Value Calibration of Volumetric Cup Used for ASTM D1513, Pour Density MICROBIOLOGICAL TESTING ASTM D5712 ASTM D6499 ASTM D7427 BS EN (Section 5.1) Analysis of Aqueous Extractable Protein in Latex, Natural Robber and Elastomeric Products Using the Modified Lowry Method Immunological Measurement of Antigenic Protein in Natural Rubber and Its Products Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex Leachable Proteins in Medical Gloves for Single Use MOISTURE CONTENT BY KARL FISCHER TITRATION ASTM D4017 ASTM D6869 ISO Water in Paints and Paint Materials by Karl Fischer Method Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) Plastics Determination of Water Content (A2LA Cert. No ) Revised 02/26/2019 Page 5 of 6

27 FLASHPOINT ASTM D92 Flash Points and Fire Points by Cleveland Open Cup er CONTACT ANGLE DETERMINATION & SURFACE TENSION ASTM D5946 ASTM D7334 ASTM D7490 ISO ASTM D971 ASTM D1331 (du Noüy Ring Method) ASTM D1417 (Section 7) Corona-Treated Polymer Films Using Water Contact Angle Measurements Surface Wettability of Coatings, Substrates, and Pigments by Advancing Contact Angle Measurement Measurement of the Surface Tension of Solid Coatings, Substrates, and Pigments Using Contact Angle Measurements Plastics Film and Sheeting Measurement of Water-Contact Angle of Corona-Treated Films Interfacial Tension of Oil Against Water by the Ring Method Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials Rubber Lattices Synthetic Note: The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material and/or safety specifications listed below; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited. ASTM D4626, E682 European Standards: BS EN 71-3 Vanderbilt Latex Handbook (3 rd Edition) (for Reference Only) EPA Method 24 (see Note 1 below) Note: For Determination of Volatile Matter Content, Water Content, Density and Weight Solids of Surface Coatings, refer to test methods ASTM D1475, D2369 and D4017 in the accredited portion of this scope listed above. (A2LA Cert. No ) Revised 02/26/2019 Page 6 of 6

28 Accredited Laboratory A2LA has accredited AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Chemical ing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 5 th day of March Vice President, Accreditation Services For the Accreditation Council Certificate Number Valid to January 31, 2020 Revised February 26, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Chemical Scope of Accreditation.