Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO Box l Khobar Kingdom of Saudi rabia Contact: Mr Pettitt Tel: Fax: info.saudiarabia@element.com Website: is accredited for a flexible scope that enables them to establish site laboratories to conduct the activities detailed below under Construction Materials Testing and Site Sampling, in accordance with their documented in-house procedure: SLP 4.16 Current locations covered by the scope of accreditation: details ctivity code ddress Element Saudi rabia Company Limited Qussim Street / 133 Road II Industrial City Dammam Kingdom of Saudi rabia Postal ddress Element Saudi rabia Company Limited PO Box l Khobar Kingdom of Saudi rabia Local contact Mr Pettitt Tel: Fax: info.saudiarabia@element.com ggregates - Physical & Mechanical tests Concrete - Physical & Mechanical tests Soils - Physical & Mechanical tests Environmental Samples - Chemical tests Metals & Weldments - Mechanical tests Metals & Weldments - Metallurgical tests Metals & Weldments - Chemical tests Metals & Weldments - Corrosion tests Site activities performed away from the locations listed above: details ctivity code ddress Commercial and Industrial Premises Local contact Mr Pettitt Tel: Fax: info.saudiarabia@element.com Soils Site Sampling B ssessment Manager: JW Page 1 of 17

2 Contents ccredited ctivity Page of Schedule nalytical Chemical Testing 3 Construction Materials Testing 10 Metallurgical, Mechanical & ssociated Chemical Testing 14 Site Sampling and Testing 16 ssessment Manager: JW Page 2 of 17

3 DETIL OF CCREDITTION LECHTES WTERS raw, effluent, leachate and groundwater WSTE WTERS - untreated and treated domestic and industrial waste water SLINE WTERS Determination of total metals including: luminium ntimony rsenic Barium Beryllium Boron Cadmium Calcium Cobalt Copper Chromium Iron Lead (*) Lithium Magnesium Manganese Mercury Molybdenum Nickel Phosphorus Potassium Selenium Silicon Sodium Silver Strontium Thallium Tin Titanium Uranium Vanadium (*) Zinc USEP 3050B and 3125 Documented In-house method KB-MD-133 using ICP-MS techniques NOTE (*) excluded from SLINE WTERS ssessment Manager: JW Page 3 of 17

4 LECHTES WTERS potable Determination of total metals including: luminium ntimony rsenic Barium Beryllium Boron Cadmium Calcium Cobalt Copper Chromium Iron Lead Lithium Magnesium Manganese Mercury Molybdenum Nickel Phosphorus Potassium Selenium Silicon Sodium Silver Strontium Thallium Tin Titanium Uranium Vanadium Zinc Documented In-house method KB-MD-131 by ICP-MS ssessment Manager: JW Page 4 of 17

5 WTERS Potable Determination of nions: Fluoride Chloride Bromide Nitrate Nitrite Sulphate Ortho-phosphate Documented In-house method KB-MD-322 by ion chromatography Determination of Bromate Documented In-house method KB-MD-320B by ion chromatography Oil and Grease STM D7678 (FTIR); KB-MD414 WTERS Saline Oil and Grease PH 5220B (Gravimetric); KB-MD414 WTERS Potable SLINE WTERS & SOILS Semi Volatile Organic Compounds (SVOC s) and Polycyclic romatic Hydrocarbon (PH) including: zobenzene 1,2-Dichlorobenzene 1,3-Dichlorobenzene 1,4-Dichlorobenzene 1,2,4-Trichlorobenzene Hexachlorobenzene Nitrobenzene 2,4-Dinitrotoluene 2,6-Dinitrotoluene 2-Chlorophenol 2,4-Dichlorophenol 2,4,5-Trichlorophenol 2,4,6-Trichlorophenol o-cresol p-cresol Documented In-house methods KB-MD-406 for SVOC s; KB-MD-403B for PH in Soils; KB-DM-403 for PH in Water; by GC-MS ssessment Manager: JW Page 5 of 17

6 WTERS Potable SLINE WTERS & SOILS (cont d) Semi Volatile Organic Compounds (SVOC s) and Polycyclic romatic Hydrocarbon (PH) including (cont d) 2-Nitrophenol 2,4-Dimethylphenol 4-Chloro-3-methylphenol Dimethyl phthalate Diethyl phthalate Bis(2-ethylhexyl)phthalate Butyl benzylphthalate Di-n-butylphthalate Di-n-octylphthalate 4-Chlorodiphenylether 4-Bromophenyl phenylether Dibenzofuran Isophorone Hexachloroethane n-nitrosodi-n-propylamine Bis(2-chloroisopropyl) ether Bis 92-chloroethyl)ether n-nitrosodimethylamine bis(2-chloroethoxy)metyhane 4-Chloroaniline 2-Nitroaniline Hexachlorobutadiene Hexachlorocyclopentadiene Naphthalene 2-Methylnaphthalene 2-Chloronaphthalene Naphthalene cenaphthene cenaphthylene nthracene Carbazole Benzo(a)anthracene Benzo(b)fluoranthene Benzo(k)fluoranthene Benzo(g,h,i)preylene Benzo(a)pyrene Documented In-house methods KB-MD-406 or SVOC s KB-MD-403B for PH in Soils; KB-MD-403 for PH in Waters; by GC-MS ssessment Manager: JW Page 6 of 17

7 WTERS Potable SLINE WTERS & SOILS (cont d) Semi Volatile Organic Compounds (SVOC s) and Polycyclic romatic Hydrocarbon (PH) including (cont d) Chrysene Fluorene Fluoroanthene Dibenze(a,h)anthracene Ideno(1,2,3-c,d)Pyrene Phenathrene Pyrene Documented In-house methods KB-MD-406 or SVOC s KB-MD-403B for PH in Soils; KB-MD-403 for PH in Waters; by GC-MS Extractable Petroleum Hydrocarbons (EPH) and Total Petroleum Hydrocarbons (TPH) (>C10 to C40) Documented In-house method KB-MD-401 by GC-FID WTERS POTBLE, EFFLUENT and SLINE WTERS & SOILS Volatile Organic Compounds (VOC S) Dichlorodifluoromethane; Vinyl Chloride; Bromomethane; Chloroethane; Trichlorofluoromethane; 1,1-Dichloroethane; Methylene Chloride; Methyl Tert-butyl ether (MTBE); trans-1,2 Dichloroethene; 1,1-Dichloroethane; cis-1,2-dichloroethane; 2,2-Dichloropropane; Bromochloromethane; Chloroform; Carbon tetrachloride; 1,1,1-Trichloroethane; 1,1-Dichloropropene; Benzene; EP 8260 by Headspace GC- MS Documented In-house method KB-MD-404 ssessment Manager: JW Page 7 of 17

8 WTERS POTBLE, EFFLUENT and SLINE WTERS & SOILS (cont d) Volatile Organic Compounds (VOC S) (cont d) 1,2-Dichloroethane; tert-mylmethylether (TME); Trichloroethene; 1,2-Dichloropropane; Bromodichloromethane; Dibromomethane; Toluene; cis-1,3-dichloropropene; trans-1,3-dichloropropene; 1,1,2-Trichloroethane; Tetrachloroethene; Chlorodibromomethane; 1,2-Dibromoethane; 1,3-Dichloropropane; Ethylbenzene; 1,1,1,2-Tetrachloroethane; Chlorobenzene; m,p Xylene; o-xylene; Bromoform; Styrene; Isopropylbenzene; Bromobenzene; n-propylbenzene; 1,1,2,2-Tetrachloroethane; 1,2,3-Trichloropropane; 1,3,5-trimethylbenzene; 2-Chlorotoluene; 4-Chlorotoluene; tert-butylbenzene; 1,2,4-Trimethylbenzene; sec-butylbenzene; 4-Isopropyltoluene; 1,3-Dichlorobenzene; 1,4-Dichlorobenzene; n-butylbenzene; 1,2-Dibromo-3-Chloropropane; 1,2-Diclorobenzene; 1,2,4-Trichlorobenzene; EP 8260 by Headspace GC- MS Documented In-house method KB-MD-404 ssessment Manager: JW Page 8 of 17

9 WTERS POTBLE, EFFLUENT and SLINE WTERS & SOILS (cont d) Volatile Organic Compounds (VOC S) (cont d) Hexachlorobutadiene; Naphthalene; 1,2,3-Trichlorobenzene EP 8260 by Headspace GC- MS Documented In-house method KB-MD-404 Volatile Petroleum Hydrocarbons C5 C10 (VPH) MTBE, Benzene, Toluene, Ethylbenzene, m-xylene, o- Xylene and p-xylene EP 8015B by Headspace GC-FID Documented In-house Method KB-MD-405 WTERS Conductivity PH 2150B (Electrode); KB-MD208 lkalinity Hardness Hardness PH 2320 (Titration); KB-MD201 PH 2340B (ICP-MS and Calculation); KB-MD211 PH 2340C (Titration); KB-MD211 TDS PH 2540C (Electrode / Gravimetric); KB-MD301 TSS ph PH 2540D (Gravimetric); KB-MD209 PH 4150 H + B (Electrode); KB-MD301 ssessment Manager: JW Page 9 of 17

10 WTERS (cont d) Residual Chlorine PH 4500Cl (Spectrophotometer); Hach 8167 (Total Chlorine); Hach 8021 (Free Chlorine) TOC PH 5310B (OX-IR); KB-MD319 SOILS Chloride BS :1990 (Titration) Total Sulfate BS :1990 (Gravimetric) Metals PH 3125 (ICP-MS); KB-MD106 ph BS :1990 (Electrode) End of Section ssessment Manager: JW Page 10 of 17

11 Construction Materials Testing GGREGTES Soundness STM C88-13 Reducing Field Samples to Test Size Flakiness index Elongation index Ten per cent fines value - dry - particle size 10 mm and greater (Forces from 30 to 3000 kn) Materials finer than 75 m (No 200) in mineral aggregates by washing Specific gravity and absorption of coarse aggregates Specific gravity and absorption of fine aggregates Resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los ngeles Machine Sieve analysis of fine and coarse aggregates Clay lumps and friable particles in aggregates Resistance to degradation of large-size coarse aggregate by abrasion and impact in the Los ngeles Machine STM C BS 812:Part 105:Section 105.1: 1989 BS 812:Part 105:Section 105.2: 1990 BS 812:Part 111:1990 STM C STM C STM C STM C STM C STM C142/C142M-10 STM C ssessment Manager: JW Page 11 of 17

12 GGREGTES (cont d) Total evaporable moisture content by drying STM C BITUMEN Bitumen Penetration STM D5-13 Softening Point (Ring and Ball Method) STM D36-14e1 BITUMINOUS MTERILS Marshall stability and flow STM D (withdrawn) Maximum specific gravity of paving mixtures Quantitive extraction of bitumen from bituminous mixtures Bulk specific gravity of compacted bituminous mixtures Thickness or height of compacted bituminous paving mixture specimens Mechanical size analysis of extracted aggregates sphalt content of hot-mix asphalt by ignition method Preparation of specimens using the Marshall apparatus STM D STM D STM D STM D3549/3549M-11 STM D STM D STM D Marshall Stability and flow STM D ssessment Manager: JW Page 12 of 17

13 CONCRETE - hardened Density BS 1881:Part 114:1983 Compressive strength of cubes - including curing BS 1881:Part 116:1983 BS 1881:Part 111:1983 Water absorption BS 1881:Part 122:2011 Depth of penetration of water under pressure Compressive strength of cylindrical specimens - including curing BS EN :2009 STM C39-15a Rapid chloride permeability STM C a Water permeability DIN 1048:Part 5:June 1991 Rebound Hammer Test STM C805-13a Obtaining Drilled Cores STM C42-13 Cement Mortar Compressive Strength Capping Concrete Cylinder Specimens STM C STM C Curing Concrete STM C CONCRETE - fresh Slump STM C143-15a ir Content STM C231-17a Setting Time of Cement STM C Unit Weight & Yield of Concrete Making Concrete Test Specimens in the Field STM C138-17a STM C31-18 ssessment Manager: JW Page 13 of 17

14 CONCRETE fresh (CONT D) Preparation of trial concrete mixes STM C192/C-15 Temperature STM C SOILS for civil engineering purposes Particle Size nalysis STM D422-63(2007)e2 Standard Proctor Tests STM D698-12e2 Specific Gravity of Soils STM D mount of material finer than 75µm(#200 sieve)in soils by washing Laboratory compaction characteristics of soil using modified effort CBR (California Bearing Ratio) of laboratory-compacted soils (Forces from 2 to 40 kn) STM D STM D e1 STM D Water (moisture) content STM D Sand Equivalent of Soils STM D Maximum index density and unit weight of soils using a vibratory table Minimum index density and unit weight of soils and calculation of relative density STM D STM D LL, PL, PI STM D e1 End of Section ssessment Manager: JW Page 14 of 17

15 Metallurgical, Mechanical & ssociated Chemical Testing Plain carbon and low alloy steels Elemental nalysis Documented In-House Method EX-M-OP-CH-KB-MD101 by OES using Direct Reading Optical Emission Spectrometry techniques Iron, steels and other ferrous metals Vickers (HV5 and HV10) BS EN ISO :2005 STM E384-11e1 Charpy impact (in the temperature range 77 K to ambient) Tensile at ambient temperature (forces up to 2000 kn) STM E23-16b STM BS EN ISO :2009 STM E8/E8M-13a STM PI 5L 45 th Edition 2013 Carbon steel bars for the reinforcement of concrete Bend STM 615/615M-16 Tensile STM STM 615/615M-16 Metallurgical Tests Grain size STM E Volume fraction STM E Production and Evaluation of Field Metallographic Replicas STM E (2012) ssessment Manager: JW Page 15 of 17

16 Weldments Bend, Fillet weld fracture and Nick Break, Hardness, Impact, Tensile and Macrostructure and Microstructure in accordance with specific welding codes ISO 5173: :2011 BS EN ISO 9017:2013 BS EN ISO :2011 BS EN ISO 4136:2012 BS EN ISO 5178:2011 BS EN ISO 17639:2013 BS :2009 BS :1999 BS EN ISO : :2012 BS EN ISO :2005 BS EN 287:Part1:2011 (superseded) BS EN ISO :2013 BS EN ISO :2004 SME IX-15 PI st Edition 2013 WS D1.1/D1.1M-2010 Corrosion Tests Stainless steels Susceptibility to inter-granular corrosion STM Practices, B and E Pitting and crevice corrosion STM G48-11 Method ustenitic Stainless Steels and Wrought Iron, Nickel Rich, Chromium Dearing lloys Susceptibility to inter-granular corrosion STM G28-02(2015) End of Section ssessment Manager: JW Page 16 of 17

17 Site Test ctivities SOILS for civil engineering purposes Density and unit weight of soil in place by the sand-cone method STM D e1 B In-situ density of soil using a nuclear density gauge STM D a B In-situ Density Complex Impedance Method STM D a B END ssessment Manager: JW Page 17 of 17