Feel The Color. SPECTRAL 2.0 is a complete paint coat repair technology, designed specifically for the needs of painters and paint shop owners.

Transcription

1 Feel The Color

2 Feel The Color SPECTRAL 2.0 is a complete paint coat repair technology, designed specifically for the needs of painters and paint shop owners. SETS NEW STANDARDS IN THE PAINT SHOP INDUSTRY SUPPORTS PAINT SHOP MANAGEMENT WITH THE NEW CAR COLOR SOFTWARE OPTIMIZES THE REPAIR PROCESS: reduces repair time reduces repair costs superior quality warranty WAVE 2.0 BASE 2.0 CarColor MOBILE THE FASTEST COATING TECHNOLOGY ON THE MARKET TAKE-SHAKE-USE SYSTEM WET ON WET APPLICATION NEW CAR COLOR SOFTWARE PROFESSIONAL TRAINING PROGRAMS EASIER COLOR MATCHING MONO BASECOATS LARGE BASE OF PIGMENTS & THE LATEST PYRISMA AND COLORSTREAM EFFECTS ADVANCED TECHNICAL AIDS NEW COLORBOXES, ARRANGED CHROMATICALLY OR BY BRAND SPECTROPHOTOMETER The largest commercially available recipe database Advanced automatic and manual adjustment procedures The software supports coating colours with the latest in finishing technologies Simple to use and understandable software that can build your recipe archive User-friendly and portable

3 AN END-TO-END TECHNOLOGY Spectral 2.0 provides end-to-end processing systems for the best quality in finish and workmanship at every stage of the paint repair process. Spectral 2.0 is a technology that answers all problems at every stage of the paint coat repair process: from superior clearcoats, including Europe's renowned Spectral KLAR 565, to Spectral UNDER primers, putties with the proprietary Mixing Indicator, and color matching systems. Every vehicle requires an individual approach, depending on the type of damage and the owner's needs. Spectral 2.0 tackles this problem with an entire range of repair technologies, including coating processes for new parts, old paint spot repairs, putty-filled body parts, and plastic details. INNOVATIVE TECHNOLOGIES With NOVOL one works with a company that aims to become a leader in the paint system industry, which we are achieving by consistently marketing pioneering solutions that are successfully used by the largest paint system service providers. SUPERIOR QUALITY MATERIALS Spectral 2.0 Technology is an optimum process for paint coat repair shops who wish to provide unparalleled service standards, improve work efficiency and reduce the costs of modern paint coat processing. Spectral 2.0 is based on superior quality materials from leading European vendors. A team of laboratory experts have formulated suitable product recipes and improved each component of the system. spectral.pl/en 3

4 SYSTEM FLEXIBILITY Spectral 2.0 is adapted to suit the actual needs of painters and paint shop owners. No matter what the specific processing conditions, specific repair demands or personal preferences of the painters, Spectral 2.0 is flexibly customisable to the size of the paint coat repair and weather conditions, simply by adjusting the curing rates, selecting appropriate thinners and choosing clearcoats of the desired textural finish. The right selection of painting materials helps to achieve moderate and large-surface paint repairs, as well as fast spot repairs, including the hassle-free and effective repair of plastic parts. PROVEN BY PRACTICE When a paint shop decides to choose Spectral 2.0 Technology, the decision is strategic and informed, based on the trust that all the system components have been designed and tested for optimum integration and minimisation of coating errors. This is why complete, fast and effective paint coat repairs are possible with a full guarantee of successful processing. TRAINING Dedicated Spectral 2.0 oriented training programs and demonstrations take place at paint shops, without any interruptions to the business, and at NOVOL s advanced Training Centre. The know-how transferred in this way adds the value of guaranteed paint coat processing success to the satisfaction of painters and paint shop customers. Our team of professional technicians and trainers provides consulting, support and continuous access to extensive know-how in the application of Spectral 2.0 paint supplies. The training programs are delivered by experienced trainers who always work in direct cooperation with NOVOL's laboratory experts. This is how our trainers can deliver in-depth knowledge of NOVOL s products and their processing. 4 spectral.pl/en

5 COST OPTIMISATION Spectral 2.0 is the right way to achieve minimum costs, through the use of streamlined paint coat repair processes, which are also supported by the new Car Color program. This guarantees high levels of profitability for modern paint shops through improvement of all aspects of the paint coat repair process: processing time, ease of application, and color matching. TECHNICAL SUPPORT Spectral 2.0 ensures support every step of the way, from engineering and technology to marketing and endorsement. Technical consulting and care is provided by our Sales Representatives and Technicians, and they work in direct contact with our customers. Our staff provides access to all the latest information about our new products and services, while offering the right selection of products and processes to guarantee the most effective paint shop work and service quality. Our Laboratory can deliver custom-designed technologies and products, tailored to the customer s needs. CarColor Mobile Application features: Find Spectral system color recipes, Select alternative colors and their recipes, Calculate the required coat volume to process your parts, Find sample chips for your alternative colors, Rate the recipes to help us develop our color systems, Add recipes to your Favourites, 24/7 instant access to updated color recipes, Find Spectral system recipes for additives (various configurations of coats and primers), Access the latest and complete system documentation. online.spectral.pl 5

6 SPECTRAL WAVE 2.0 WATERBORNE COATING SYSTEM THE FASTEST COATING TECHNOLOGY ON THE MARKET The Spectral WAVE 2.0 waterborne system of automotive body color matching is a proprietary project of NOVOL that meets the highest requirements of car painters and their customers alike. Spectral WAVE 2.0 is the fastest coating system on the market! Cutting down repair times where high labour costs, courtesy cars and requirements of increasingly aware customers is of key importance. Car service customers demand fast and impeccable repair results where readily evident or requiring a closer scrutiny, and both must match the original parameters of repaired vehicles. Spectral WAVE 2.0 guarantees customer satisfaction with every paint repair! Simple, clean and with dosing adjustment: these are the key characteristics of the Take-Shake-Use paint containers, a solution which ensures easy, convenient and fast use. Spectral WAVE 2.0 enables wet on wet application with full compliance with the specified hiding power, repeatability, color stability, and effective fading out with no additives. Spectral WAVE 2.0 provides a dedicated back-end online portal for customized ordering of recipes for a quick response from NOVOL's Development Laboratory. We can provide customized coating recipes for every customer! online.spectral.pl Frequently updated recipes and color samples are what makes Spectral WAVE 2.0 evolve. 6

7 WAVE Spectral WAVE 2.0 is a system of 80 components: 39 solid pigments (with 8 reduced concentration pigments for easier color matching) 10 aluminium pigments (8 silver, 1 golden and 1 orange) 18 pearl pigments 5 Xirallic pigments 4 multi-color powder pigments (Colorstream ) Binder for 3-coat colors Flop controller Special thinner, available in a standard and slow version (the latter is dedicated for processing at > 30 C) Spectral WAVE 2.0 system components PRODUCT RACK 7 shelves, closed with sliding doors. Rack size: 210x120x30 cm (H/W/D). SCALE high precision electronic scales with a maximum capacity of 7.5 kg and a resolution of 0.01g. The scales support the Car Color software, and when both are interfaced, the device enables automatic adjustment of overdosed pigments and warehouse management at the shop. TABLE a universal work bench made of stainless steel and complete with an additional top shelf and a drawer. COLOR-BOX original color templates organised by automotive brands (or optionally in a chromatic order) and stored in a dedicated cabinet. The large number of color alternatives helps choose the colors most approximate to the ones being repaired. The Color-box is updated with the latest colors three times a year. SOFTWARE a user-friendly PC software suite with a color recipe database which helps adjust overdosed pigments and manage an archive of custom color recipes. The user can also enjoy advanced warehouse management functionalities as well as manage and archive their shop orders. COLOR MATCHING SAMPLER contains sprayed-on pigment samples, shown in their clear tones and in combination with white and silver pigments. Specifies the hiding power, hue and flop. 7

8 8 CHROMATIC CIRCLE WAVE 2.0 SOLID ALUMINIUM SA-812 SA-814 SA-816 SA-820 SA-822 SA-824 SA-826 SA-828 SA-832 SA-834 PEARL SA-900 SA-910 SA-911 SA-940 SA-943 SA-950 SA-951 SA-980 SA-981 SA-982 SA-991 SA-992 SA-993 SA-994 SA-995 SA-996 SA-997 SA-998 XIRALLIC SA-X10 SA-X40 SA-X50 SA-X60 SA-X80 SA-000 SA-001 SA-002 SA-003 SA-004 SA-090 SA-091 SA-092 SA-100 SA-101 SA-102 SA-103 SA-106 SA-140 SA-142 SA-143 SA-160 SA-162 SA-210 SA-240 SPECTRAL SPECIAL EDITION SA-P10 SA-P16 SA-P30 SA-P50 SA-P56 SA-P60 SA-P67 SA-X30 SA-X56 SA-X70 C-00 C-01 C-02 C-03 C-844 SA-311 SA-404 SA-410 SA-412 SA-413 SA-414 SA-450 SA-451 SA-454 SA-540 SA-560 SA-600 SA-606 SA-610 SA-611 SA-650 SA-651 SA-700 SA-710

9 WAVE Spectral WAVE 2.0 WATERBORNE BASECOAT SYSTEM PROPERTIES: High yield High hiding power Excellent drying Easy application and shading VOC compliance acc. to Directive 2004/42/EC RELATED PRODUCTS: Spectral EXTRA W785: Waterborne degreaser Product symbol SA SA-710 SA SA-828 SA SA-834 SA SA-951 SA SA-998 SA-P10 - SA-P67 SA-X10 - SA-X80 C-01 - C-03 C-844 SA-D01 SA-D90 SA-R10 SA-R30 SA-D20 SA-H20 Product name Solid base pigments Aluminium pigments Aluminium colour pigments Pearl pigments Multi-colour pearl pigments Special pearl pigments Xirallic pigments Colorstream powder pigments Aluminium powder pigment Flop controller 3CT system additive Reducer Reducer Converter Activator SUBSTRATE PREPARATION Filling or priming variant: dry power sand with: pre-sanding: P320-P360 SPECTRAL acrylic primers and SPECTRAL epoxy primers finish: P400-P500 or grey abrasive needle cloth alternatively: wet sand by hand: pre-sanding: P600 finish: P800 Degrease with EXTRA W785. Wet-on-wet variant: See the Technical Data Sheets for SPECTRAL primers Existing OEM finish Dry power sand with P400-P500 or grey abrasive needle cloth. Thoroughly degrease with EXTRA W785. SPECTRAL GREY SYSTEM P1 P2 P3 P4 P5 Using the Spectral Grey System for substrates: produces a substrate color for optimum coverage; increases the basecoat yield and better rendering of the color. See the Car Color programme for the recommended spectral grey value. If this information is unavailable in Car Color, use the default P3 (grey) primer. 9

10 RECIPE PREPARATION RECIPE PREPARATION Mix the components of Spectral WAVE 2.0 in a plastic container. Mix the batched ingredients thoroughly. Keep the unused basecoat in a tightly closed plastic container. Storage temperature: +5 C C. Avoid exposure to sunlight. Perform a test spray to verify the color match before the actual repair. APPLICATION CONDITIONS It is recommended to apply SPECTRAL WAVE 2.0 at over +15 C and at a humidity of 80% or lower. Nozzle Low-pressure spray gun or high-pressure gravity fed spray gun 1.3 mm Recommended: Low-pressure gravity fed HVLP spray gun APPLICATION Dry coating thickness: Shake vigorously: for 1 minute minimum, if the container's factory seal is unbroken; for 30 s minimum, if the container is open. METALLIC & PEARL COLORS Dosing in Spectral Car Color SA-R10 Reducer: apply at +15 C C SA-R30 Reducer: apply at > +30 C DIN 4/20 C Depending on the color: s Apply a check layer (to verify substrate preparation) at 30% of the full layer. Apply the individual layers 1 or 2 until the desired hiding power is achieved. Application without a drying interval: 2 layers maximum. Dry the hiding layers until matt. Apply a double drop layer without a drying interval. Drop layer parameters: material quantity reduction: 70% recommended pressure: bar spraying distance: as for the hiding layer Dry the layers until fully matt + 5 min before applying the clearcoat. SOLID (NO-EFFECT) COLORS Pressure See the spray gunmanufacturer's recommendations Dosing in Spectral Car Color SA-R10 Reducer: apply at +15 C C SA-R30 Reducer: apply at > +30 C DIN 4/20 C Depending on the color: s Apply a check layer (to verify substrate preparation) at 30% of the full layer. Apply the individual layers 1 or 2 until the desired hiding power is achieved. Application without a drying interval:2 layers maximum. Solid colors require no drop layers. Dry the layers until fully matt + 5 min before applying the clearcoat μm μm DRYING TIME MIXTURE LIFE The drying time of Spectral WAVE 2.0 depends on air temperature and humidity. High humidity and low temperatures prolong the drying time. Induced air circulation or higher temperatures will reduce the drying time. 3 months/20 C (w/o SA-R10 or SA-R30 Reducer) 1 month/20 C (with SA-R10 or SA-R30 Reducer) 10

11 WAVE VOC CONTENT VOC II/B/d limit* Actual VOC content * For ready to use mixture acc. to EU Directive 2004/42/EC. EQUIPMENT CLEANING Pre-clean with water, clean thoroughly with a solvent (e.g. NC). STORAGE CONDITIONS Store in a dry room at above +5 C. Avoid direct exposure to sunlight. SHELF LIFE Spectral WAVE 2.0 Factory sealed containers Spectral WAVE 2.0 Once unsealed and opened SA-H20 Activator SAFETY See the Safety Data Sheet. 24 moths/20 C 6 months/20 C 12 months/20 C 420 g/l 380 g/l Procedure: Protect system components from freezing Keep and use at ca. 20 o C Shake well each system component before use Perform a test spray Follow the product application guidelines Shade to optically level out any color difference between the old and new coats Using the right spectral grey primers helps improve the basecoat yield and the color finish The Spectral WAVE 2.0 basecoat in all colors has a VOC (volatile organic compound) content of < 420 g/l and meets the EU Directive 2004/42/EC of 21 April

12 SPECTRAL BASE 2.0 COLOR MIXING SYSTEM EASY COLOR MATCHING Those customers who look for non-waterborne systems are covered by our easy and effective color matching solution: the Spectral BASE 2.0 color mixing system. Color specialists are often challenged by the need to match the processed part color to the adjacent body parts. We understand that many factors may affect color changes, including weathering of the original coat, the basecoat thickness, the primer background color, etc. We also understand that matching the color templates to recipes is just as important as easy color adjustments. Spectral BASE 2.0 includes the essential pigments and color matching tools: Colorboxes, arranged chromatically or by vehicle brand. Car body color pallets are growing continuously as new colors are developed, often with new finish effect bases. That is why we update our database with approximately 450 colors each year. Access to new basecoat pigments with the latest Pyrisma and Colorstream effects. Spectrofotometer, which not only finds the closest matching recipes, but also the right color adjustment range. Mixing frames with fully configurable weight, width and number of product containers installed. The mixing frames can even be adapted for installation in corners! 12 Reduced product consumption, short spray booth processing and reduced repair times are the tangible benefits of using Spectral BASE 2.0. This optimises the work of color specialists and basecoat painters! Spectral Special Edition* are special pigments designed to match specific colors offered online.spectral.pl The continuous by automotive manufacturers. development of Spectral *(Available on order and not included with the Spectral BASE 2.0 BASE 2.0 means periodic starter pack) updates of the recipe 4 Colorstream (multicolor) pigments; database and the color 3 Xirallic pigments; samplers. 7 Pyrisma pigments; red aluminium.

13 Spectral BASE 2.0 combines 75 components: 41 solid pigments (including the B-D10 flop controller); 11 aluminium pigments (9 silver, 1 golden and 1 orange); 17 pearl pigments; 5 Xirallic pigments; Binder for 3-coats colors. Spectral BASE 2.0 system components MIXER contains a rack of shelves for 0.5, 0.8 and 3.5 litre containers. Requires standard 230 V/ 50 Hz electrical mains. The mixer is a modular rack that allows freedom in its configuration. SCALE high precision electronic scales with a maximum capacity of 7.5 kg and a resolution of 0.01g. The scales support the Car Color software, and when both are interfaced, the device enables automatic adjustment of overdosed pigments and warehouse management at the shop. TABLE a universal work bench made of stainless steel and complete with an additional top shelf and a drawer. COLOR-BOX original color templates organised by automotive brands (or optionally in a chromatic order) and stored in a dedicated cabinet. The large number of color alternatives helps choose the colors most approximate to the ones being repaired. The Color-box is updated with the latest colors three times a year. SOFTWARE a user-friendly PC software suite with a color recipe database which helps adjust overdosed pigments and manage an archive of custom color recipes. The user can also enjoy advanced warehouse management functionalities as well as manage and archive their shop orders. COLOR MATCHING SAMPLER contains sprayed-on pigment samples, shown in their clear tones and in combination with white and silver pigments. Specifies the hiding power, hue and flop. 13

14 14 CHROMATIC CIRCLE BASE 2.0 B-450 B-414 B-412 B-413 B-142 B-144 B-100 B-102 B-103 B-160 B-162 B-710 B-700 B-611 B-610 B-600 B-650 B-651 B-560 B-540 B-454 B-143 B-163 B-140 B-240 B-311 B-410 B-442 B-451 SOLID ALUMINIUM SA-812 SA-814 SA-816 SA-820 SA-822 SA-824 SA-826 SA-828 SA-832 SA-834 PEARL SA-900 SA-910 SA-911 SA-940 SA-943 SA-950 SA-951 SA-980 SA-981 SA-982 SA-991 SA-992 SA-993 SA-994 SA-995 SA-996 SA-997 SA-998 XIRALLIC SA-X10 SA-X40 SA-X50 SA-X60 SA-X80 SA-000 SA-001 SA-002 SA-003 SA-004 SA-090 SA-091 SA-092 SA-100 SA-101 SA-102 SA-103 SA-106 SA-140 SA-142 SA-143 SA-160 SA-162 SA-210 SA-240 SPECTRAL SPECIAL EDITION SA-P10 SA-P16 SA-P30 SA-P50 SA-P56 SA-P60 SA-P67 SA-X30 SA-X56 SA-X70 C-00 C-01 C-02 C-03 C-844 SA-311 SA-404 SA-410 SA-412 SA-413 SA-414 SA-450 SA-451 SA-454 SA-540 SA-560 SA-600 SA-606 SA-610 SA-611 SA-650 SA-651 SA-700 SA-710

15 Spectral BASE 2.0 THINNER BASE MIXING SYSTEM PROPERTIES: High yield High hiding power Excellent drying Easy application and shading RELATED PRODUCTS: Spectral SOLV 885: Basecoat thinner Standard, fast and slow Spectral EXTRA 795: Fade out thinner Product symbol B-000 B-710 B-810 B-828 B-832 B-834 B-910 B-998 B-P10 B-P67 B-X10 B-X80 C-01 C-03 C-844 BD-01 BD-02 Product name Solid base pigments Aluminium pigments Aluminium colour pigments Pearl pigments Pyrisma pearl pigments Xirallic pigments Colorstream powder pigments Aluminium powder pigment Flop controller 3CT system additive SUBSTRATE PREPARATION Filling or priming variant: dry power sand with: pre-sanding: P320-P360 finish: P400-P500 or grey abrasive needle cloth. SPECTRAL acrylic primers alternatively: wet sand by hand: and pre-sanding: P600 SPECTRAL epoxy primers finish: P800 Degrease with EXTRA 785. Wet-on-wet variant: see the Technical Data Sheets for SPECTRAL primers Dry power sand with P400-P500 or grey abrasive needle cloth. Existing OEM finish Thoroughly degrease with EXTRA 785. SPECTRAL GREY SYSTEM P1 P2 P3 P4 P5 Using the spectral grey system for substrates facilitates: producing a substrate color with optimum hiding power; increasing the basecoat yield and better rendering of the color. See the Car Color program for the recommended spectral grey value. If this information is unavailable in Car Color, use the default P3 (grey) primer. RECIPE PREPARATION Mix the components. Use the mixing rack for at least 10 minutes twice a day. 15

16 APPLICATION CONDITIONS It is recommended to apply SPECTRAL BASE 2.0 at over 18 C and at humidity of 75% or lower. Nozzle Pressure Spray gun adjustment (feed) APPLICATION Dry coating thickness: Low-pressure spray gun or high-pressure gravity fed spray gun Recommended: SATA jet 4000 low-pressure gravity fed HVLP spray gun Full layer 1.3 mm bar 2.5 turns Thin layer 1.3 mm bar 1 turn METALLIC & PEARL COLORS SOLID (NO-EFFECT) COLORS Dosing in Spectral Car Color Use SOLV 885 between 15 C-30 C Dosing in Spectral Car Color Use SOLV 885 between 15 C-30 C Volume ratio Volume ratio DIN 4/20 C Depending on the color: s Apply a test layer (to verify substrate preparation) at 30% of the full layer. Apply the individual layers 1 or 2 until the desired hiding power is achieved. Application with a recoating pause: use drying. Dry the hiding layers until matt. Application of a single drop layer spraying distance: as for the hiding layer DIN 4/20 C Depending on the color: s Apply a test layer (to verify substrate preparation) at 30% of the full layer. Apply the individual layers 1 or 2 until the desired hiding power is achieved. Application with a recoating pause: use drying. Solid colors require no drop layers. Dry the layers until fully matt + 5 min before applying the clearcoat. recommended pressure: 1,4-1,5 bar material reduction: to 30 % Dry the layers until fully matt + 5 min before applying the clearcoat μm μm DRYING TIME The drying time of Spectral WAVE 2.0 depends on air temperature and humidity. High humidity and low temperatures prolong the drying time. Induced air circulation or higher temperatures will reduce the drying time. SPECTRAL SOLV 885 BASECOAT THINNER Surface 20 C max C C Small 1-2 elements SOLV 885 Fast SOLV 885 Fast SOLV 885 Standard Spot repair Moderate SOLV 885 Fast SOLV 885 Standard SOLV 885 Slow 3-5 elements Large SOLV 885 Standard SOLV 885 Slow SOLV 885 Slow over 5 elements 16

17 MIXTURE LIFE 3 months/20 C (without the thinner) EQUIPMENT CLEANING Clean thoroughly with Spectral SOLV 855, Spectral SOLV 885 or an NC thinner. STORAGE CONDITIONS Store in a cool dry room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral BASE months/20 C Spectral SOLV 885 SAFETY See the Safety Data Sheet. 17

18 SPECTRAL 2K ACRYLIC SYSTEM WIDE COLOR RANGE The Spectral 2K acrylic coat system has been enjoying steady popularity. It has become a leader in its segment. Spectral 2K is a cost-effective system with a wide range of colors and excellent hiding power parameters: Ideal color representation thanks to special colorboxes, made with actual Spectral 2K sprayed-on color samples. Just one layer is enough for perfect hiding. The hardener curing rates for processing in virtually all ambient conditions and with various application surface areas. One of the basecoats features metallic finish effects for a very cost-efficient formulation of metallic colors that are identical to two-layer basecoats. Full customization of additives. Spectral 2K comes with pre-purchase testing directly at your paint shop or NOVOL's Training Centre. 18

19 Spectral 2K mixing system comprises 24 single-dye topcoats: hardeners (slow, standard and fast), thinners (slow, standard and fast), matting agent, fillers in all shades of grey and other products (please see additives). Spectral 2K system components: MIXER contains a rack of shelves for 0.5, 0.8 and 3.5 litre containers. Requires standard 230 V/ 50 Hz electrical mains. The mixer is a modular rack that allows freedom in its configuration. SCALE high precision electronic scales with a maximum capacity of 7.5 kg and a resolution of 0.01g. The scales support the Car Color software, and when both are interfaced, the device enables automatic adjustment of overdosed pigments and warehouse management at the shop. TABLE a universal work bench made of stainless steel and complete with an additional top shelf and a drawer. COLOR-BOX original color templates organised by automotive brands (or optionally in a chromatic order) and stored in a dedicated cabinet. The large number of color alternatives helps choose the colors most approximate to the ones being repaired. The Color-box is updated with the latest colors three times a year. SOFTWARE a user-friendly PC software suite with a color recipe database which helps adjust overdosed pigments and manage an archive of custom color recipes. The user can also enjoy advanced warehouse management functionalities as well as manage and archive their shop orders. COLOR MATCHING SAMPLER contains sprayed-on pigment samples, shown in their clear tones and in combination with white and silver pigments. Specifies the hiding power, hue and flop. 19

20 CHROMATIC CIRCLE 2K S-100 S-143 S-160 S-140 S-710 S-610 S-700 S-600 S-413 S-411 S-410 S-500 S-540 S-416 S-453 S-451 S-000 S-001 S-002 S-003 S-090 S-091 S-800 Application procedure: In order to reduce consumption of Spectral topcoats, we recommend using Spectral UNDER 365, UNDER 335 or UNDER 325 lines of fillers in appropriate shades of grey. On a surface prepared this way, apply by spraying two or three coats of paint. In order to achieve better color matching it is recommended to perform shading as a part of the technological process. Work done as outlined above and the use of original Spectral additives will ensure satisfaction both of the painter and the client and will help reduce cost of materials. 20

21 Spectral 2K TWO-COMPONENT ACRYLIC MIXING SYSTEM PROPERTIES: High yield Perfect hiding power Very good flowability Wide range of colors RELATED PRODUCTS: Spectral H 6005: Standard, fast and slow hardeners Spectral SOLV 855: Standard, fast and slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent Spectral S-D10: Matting additive Spectral EXTRA 895: Fade out thinner SUBSTRATES Acrylic, polyurethane, epoxy primers Prepare in accordance with the information contained in the primer specifications. Old paint coatings Mat and degrease. Polyester laminates Mat and degrease. MIXING RATIO Volume ratio Spectral 2K 3 Spectral H Spectral SOLV VISCOSITY o DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS A ctual VOC content* approximately 600 g/l depending on the color * The products listed herein are intended for professional use in installations only according to Directive 1999/13/EC. The products must only be used as intended. The information contained herein is based on state of the art engineering and science, and obligates the product user to comply with all necessary measures ensuring the intended use of the products. Read the Safety Data Sheets of the products before use. APPLICATION CONDITIONS o The topcoat should be applied at a temperature above 15 C and a humidity of no more than 80 %. Under such conditions, the hardened coating can be used after no less than 10 hours. APPLICATION Nozzle Pressure Distance CAUTION: Instructions of the equipment manufacturer must be followed. Conventional gravity fed spray gun mm 2 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm Number of layers depending on the color: 2 3 Single dry layer thickness μm 2 Yield of the ready to apply mixture for 10,6 m /l a dry layer thickness in the provided range at 50 μm o Mixture life at 20 C 6hours for H 6005 (standard and slow) Flash off between layers 2 hours for H 6005 (fast) 5 10 min 21

22 DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp min CAUTION: Use the radiator no sooner than 10 min after applying the last layer. Spectral SOLV 855 ACRYLIC THINNER Surface C C C Small H 6005 (fast) H 6005 (standard) H 6005 (standard) 1-2 elements, spot repair SOLV 855 (fast) SOLV 855 (fast) SOLV 855 (standard) Medium H 6005 (fast) H 6005 (standard) H 6005 (standard) 3-5 elements SOLV 855 (fast) SOLV 855 (standard) SOLV 855 (slow) Large H 6005 (fast) H 6005 (standard) H 6005 (slow) more than 5 elements SOLV 855 (standard) SOLV 855 (slow) SOLV 855 (slow) Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % of Spectral PLAST 775 per ready to apply mixture* (Spectral 2K and Spectral H 6005). * the provided quantity of Spectral PLAST 775 does not apply to mixtures with a mat or texture effect Spectral S-D10 MATTING ADDITIVE Depending on the desired gloss, the additive can be used in a quantity of % vol. per topcoat (without the hardener). Its use influences the mixture s viscosity, which should be taken into account when using a thinner. Add the hardener only in a quantity per acrylic topcoat (component A). Volume ratio % Gloss 70 semigloss 100 matt DRYING TIMES 20 C 60 C Dust-free 15 min 5 min Tack-free 2 hours 10 min Operational hardness 14 hours 45 min Final hardness 7 days 60 min + 1 day/20 C CAUTION: Drying times apply to the temperatures of the individual elements. Spectral EXTRA 895 FADE OUT THINNER Spectral EXTRA 895 fade out thinner should be applied in thin layers, in 1-2 passes, to the contact area between old paint and the newly-applied coat. Two working methods may by used: Method I (recommended): Apply a thin layer of fade out thinner immediately after each layer of clearcoat is applied. Method II: Apply a thin layer of fade out thinner immediately after the final layer of clearcoat is applied. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. 22

23 SHELF LIFE Spectral 2K Spectral H 6005 Spectral SOLV 855 Spectral PLAST 775 Spectral S-D10 Spectral EXTRA 895 SAFETY See Safety Data Sheet. 12 months/20 C 23

24 SPECTRAL SPOT REPAIR When you look at the cars passing you on the streets, you can usually see small dents, scratches from "parking damage" caused by doors of other vehicles, scratches on bumpers, mirror guards or door handles. Spot repairs of this type of damage require a specific approach from the painter to the processing and painting materials. Spot repairs are distinguished by: the small size of repaired surfaces (which are usually limited to single details, which should be no bigger than a A4 paper sheet, by the rule of thumb); no need for the removal of the parts being processed; low consumption of painting supplies; very short repair times (1.5 h maximum); costs, which are lower than in traditional large repairs. Spectral SPOT REPAIR products: STOPPING: Spectral FINAL/ Spectral GLAZE Finishing Putty INSULATION: Spectral UNDER 385 Epoxy Primer or Spectral UNDER 395 Spray Epoxy Primer FILLING: UNDER 365 Acrylic Filler or UNDER 355 Spray Acrylic Filler COLOR: Spectral BASE 2.0 and Spectral WAVE 2.0 mixing systems CLEARCOATS: Spectral KLAR 545 and Spectral KLAR 565 CLEARCOAT FADE OUT THINNER: Spectral EXTRA

25 SPOT REPAIR TECHNOLOGY PRODUCT Mixing ratio Viscosity Nozzle Number of layers Potlife Flash-off IR drying Curing time ALTERNATIVELY ALTER- NATIVELY ALTERNATIVELY ALTERNATIVELY ALTERNATIVELY SURFACE PREPARATION PUTTY APPLICATION SURFACE TREATMENT INSULATION SURFACE TREATMENT COLOR FADE OUT PRODUCT (not required for solid colors) CLEARCOAT (use with FAST hardeners) FADE OUT THINNER 1. Degreasing: use PLAST 815 when repairing plastic parts, use EXTRA 785 when repairing metal parts. 2. P machine dry sanding. 3. Degreasing: use PLAST 815 when repairing plastic parts, use EXTRA 785 when repairing metal parts. Spectral FINAL 2-3% 1-2 max. 250 μm 4-6 min /20 C 5 min 10 min /60 C Spectral GLAZE 2-3% 1-2 max. 250 μm 3-6 min /20 C 5 min 10 min /60 C 1. for wet-on-wet: P360-P400 machine dry sanding 2. for version with sanding: P machine dry sanding UNDER 385 1: s HVLP 0,8-1,1 RP 0,8-1,1 1st layer wet on wet 2-3 layers sanded 6h /20 C 5 min min before sanding only min UNDER 395 SPRAY 1st layer wet on wet 2-3 layers sanded 5 min 5-10 min UNDER 355 SPRAY 1-2 layers sanded 5-10 min min /20 C min /20 C Depending on the surface preparation: 1. wet on wet apply basecoat after 5-10 min 2. with sanding machine sand with P400-P500 paper + degrease with Spectral EXTRA W785 (WAVE 2.0) or Spectral EXTRA 785 (BASE 2.0) WAVE 2.0 see formula s BASE 2.0 1: s HVLP 0,8-1,1 RP 0,8-1,1 0.5 coat 1-2 covering coats 0.5 coat to drop 3 months /20 C until matt Venturi nozzle, IR: approx. 5 min WAVE 2.0 EXTRA 795 BASE SW % R10-70% s ready to use s HVLP 0,8-1,1 RP 0,8-1,1 Apply before last dropped layer of basecoat Apply before 1st layer of basecoat 5-10 min KLAR 545 KLAR 565 3:1 2: s s HVLP 0,8-1,1 RP 0,8-1,1 2 1,5 0,5 h /20 C 5 min min 20 min/ 60 C 15 min/ 60 C EXTRA 895 SPRAY EXTRA 895 Use clean or dilute with clearcoat 1:3 (1:4) 10 s Apply thin in 1-2 passes at the contact of old topcoat and new acrylic topcoat Method I (recommended): after each clearcoat layer application Method II: immediately after the last clearcoat layer 5 min 25

26 PAINT COATING OF PLASTICS Modern automotive manufacturing uses many types of plastics which feature different properties and performance characteristics, and each plastic type requires specific repair processes. To make the paint coat repairs durable, a specific working process must be followed. SPECTRAL is a range of products intended for coating of plastics. Spectral PLAST 815 Anti-Static Degreaser for Plastics, which properly cleans the surface to be coated. Spectral PLAST Putty for Plastics, which boasts excellent adhesion to most plastic material types (except for polyethylene and PTFE (Teflon)). The extremely high flexibility of this product minimises the risk of cracking over very large surfaces. Spectral PLAST 705 1K Adhesion Increasing Primer, applied with spray guns. The product improves adhesion of primers, fillers, and acrylic and PUR coats to various substrates, primarily plastic materials (excluding polyethylene and PTFE (Teflon)). Also available in a spray. Spectral PLAST 825 Plastic Adhesion Increasing Agent. The product can be added at up to 30% to acrylic and epoxy primers to increase their adhesion to plastics; it can also be used at 50% of dilution as an adhesion increasing primer (like Spectral PLAST 705). It guarantees good adhesion to normally "difficult" substrates, such as polypropylene and its mixtures. Spectral PLAST 775 A plasticizing agent for acrylic and polyurethane products which is mainly applied on plastic car body parts. The product prevents cracking and chipping of primers and topcoats on flexible, pliable parts. The product can also be used to increase flexibility of coatings on metal parts exposed to mechanical damage from stone chips (e.g. the bumper and engine hood). 26

27 PLASTICS Spectral PLAST TWO-COMPONENT PUTTY FOR PLASTICS PROPERTIES: Very elastic Soft Resistant against chipping Excellent adhesion to most plastics (except for PP, PE, PTFE and mixtures thereof) RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Plastics, except for PE, PP, PTFE Degrease, mat with an abrasive needled cloth, degrease again. and mixtures thereof Old paint coatings Degrease, dry sand P220 P280, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again. Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: The putty should not be applied directly on reactive sealers (wash primers) or one-component acrylic and nitrocellulose products. MIXING RATIO Weight ratio Spectral PLAST 100 g HARDENER 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit* 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785 or Spectral PLAST 815. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener. It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 3 mm. 5 8 minutes/20 C DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. 27

28 DRYING WITH AN INFRARED RADIATOR Distance Time depending on the type and power of the lamp SANDING Rough Finish COLOR Grey EQUIPMENT CLEANING NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral PLAST HARDENER SAFETY See Safety Data Sheet. Follow the recommendations of the equipment manufacturer Approximately 5 min P120 P180 P180 P months/20 C 28

29 PLASTICS Spectral PLAST 705 Spectral PLAST 705 SPRAY ONE-COMPONENT ADHESION INCREASING AGENT FOR PRIMERS, COATS AND COLOR ACRYLIC TOPCOATS APPLIED ON STEEL, GALVANIZED STEEL, ALUMINIUM AND MOST PLASTICS PROPERTIES: Perfect adhesion OBLIGATORY when varnishing polypropylene and mixtures thereof RECOMMENDED when varnishing other plastics SUBSTRATES Plastics, especially polypropylene Hold the element at a temperature of +50 C for at least 30 minutes. (PP) and mixtures thereof Degrease, mat with an abrasive needled cloth, degrease again. Steel Galvanised steel Stainless steel Degrease, mat with an abrasive needled cloth, degrease again. Polyester and epoxy laminates Aluminium Caution: SPECTRAL PLAST 705 does not increase adhesion to polyethylene (PE) or Teflon (PTFE). CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit SPECTRAL PLAST 705, spray 840 g/l Actual VOC content SPECTRAL PLAST 705, spray 710 g/l APPLICATION SPECTRAL PLAST 705 Degrease. Mat with an abrasive needled cloth. Degrease. CAUTION: Instructions of the equipment manufacturer must be followed. Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm Number of layers 1 2 Single dry layer thickness 5 10 μm Flash off between layers 5 10 min APPLICATION SPECTRAL PLAST 705 SPRAY Degrease. Mat with an abrasive needled cloth. Degrease. 2 minutes. 1-2 layers 29

30 APPLICATION SPECTRAL PLAST minutes / 20 C 5 s CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 sec until the valve is empty. CAUTION: Before application of further coatings do not sand Spectral PLAST 705. DRYING TIME 5 10 minutes / 20 C COLOR Straw EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral PLAST 705 Spectral PLAST 705 SPRAY SAFETY See Safety Data Sheet. 5 years/20 C 30

31 PLASTICS Spectral PLAST 815 ANTISTATIC DEGREASER FOR PLASTICS PROPERTIES: Efficiently removes fat and silicone Increases adhesion to plastics Antistatic properties USE Plastics CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/a limit 850 g/l Actual VOC content 847 g/l PROCEDURE The surface should be washed 2-3 times (in case atomizer max. 2 times). A clean piece of cloth should be used each time. One should wait until the remover evaporates completely before the application of the coat. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral EXTRA months/20 C SAFETY See Safety Data Sheet. 31

32 Spectral PLAST 825 PLASTIC ADHESION INCREASING AGENT PROPERTIES: Additive for two-component fillers, can also be used as one-component filler Excellent adhesion to plastics ESSENTIAL for coating polypropylene and its mixtures RECOMMENDED for coating other plastics RELATED PRODUCTS: Spectral SOLV 855: Acrylic thinner, standard SUBSTRATES Plastics, especially PP and its mixtures Hold the detail at +50 C for at least 30 minutes. Degrease with Spectral PLAST 815, mat down with a needle cloth, and degrease again with Spectral PLAST 815. Caution: Spectral PLAST 825 does not improve adhesion to PE (polyethylene) or PTFE (Teflon). ADDITIVE FOR TWO-COMPONENT FILLERS In order to increase the paint coating adhesion to plastic details (especially made of PP and its mixtures), add at: 30% (v/v) to Component A See the TDS of specific fillers for examples of mixing ratios. Apply as instructed in the filler's TDS. Fillers compatible with Spectral PLAST 825: Spectral UNDER 325 acrylic filler Spectral UNDER 335 acrylic filler Spectral UNDER 355 acrylic filler Spectral UNDER 365 acrylic filler Spectral UNDER 385 epoxy filler Do not use with waterborne products. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent STORAGE CONDITIONS Store in a cool dry room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral PLAST 825 SAFETY See the Safety Data Sheet. USE OF SPECTRAL PLAST 825 ONE-COMPONENT FILLER Volume ratio Weight ratio Spectral PLAST Spectral SOLV Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure spray gun Gravity fed HVLP gun NOTE: Follow the equipment manufacturer's guidelines Number of layers 1 2 Single dry layer thickness Flash-off time between layers 5 10 μm 2 5 min Drying time 5 10 min / 20 C mm 2 bar cm 32

33 ADDITIVES ADDITIVES Spectral technology is confidence in the high quality of paint coat repairs. The best quality of coating requires many conditions, including proper product quality, painter's skills, work tools, and worksite hygiene. It is also very important to follow the manufacturer's recommended processing technology, for it is very easy to obtain unsatisfactory results when products of different quality are combined. This error may result in coating defects or require many recoats. The Spectral Additives are a collection of the best qualities of painting solutions to date, boosted with the latest market trends and the innovation of NOVOL's laboratories. 33

34 Spectral KLAR 505 TWO-COMPONENT VHS CLEARCOAT PROPERTIES: Very high solid particle content (> 60 %) High yield Fast drying For repairing small areas (up to a few elements) Perfect flowability RELATED PRODUCTS: Spectral H 6115: Slow, Standard Fast and Extra Slow hardener Spectral PLAST 775: Elasticity increasing agent Spectral EXTRA 895: Fade out Thinner SUBSTRATES Spectral BASE base layers Dried matt surface. Mat gently if necessary. Spectral WAVE base layers Dried matt surface. Mat gently if necessary. Compatible with majority of solvent basecoats and water basecoats available on the market. MIXING RATIO Volume ratio Weight ratio Spectral KLAR Spectral H VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/d limit * 420 g/l Actual VOC content 415 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The coat should be applied at a temperature above 15 C and a humidity of no more than 80 %. Under such conditions, the hardened coating can be used after no less than 10 hours. APPLICATION Nozzle Pressure Distance CAUTION: Instructions of the equipment manufacturer must be followed. Conventional gravity fed spray gun mm 2 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm Number of layers 1.5 Single dry layer thickness μm 2 Yield of the ready to apply mixture for 10,6 m /l a dry layer thickness in the provided range at 50 μm o Mixture life at 20 C 30 min Flash off between layers 5 10 min DRYING TIMES Dust-free Tack-free Operating hardness Ending hardness H 6115 standard 20 C 60 C 40 min 5 min 3 hours 10 min 12 hours 35 min 7 days 35 min + 3 days/20 C 34

35 ADDITIVES CAUTION: Drying times apply to the temperatures of the individual elements.drying the coat with a fast hardener at an increased temperature can deteriorate the gloss and make it necessary to polish the coat. A coat cured at a temperature of 20 C reaches a lower ending hardness than a coat cured at 60 C. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp min. CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. RELATED PRODUCTS, DEPENDING ON THE PROCESSING TEMPERATURE C C C + 35 C Spectral H 6115 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % of Spectral PLAST 775 per ready to apply mixture (Spectral KLAR 505 and Spectral H 6115). * the provided quantity of Spectral PLAST 775 does not apply to mixtures with a mat or texture effect Spectral EXTRA 895 FADE OUT THINNER Spectral EXTRA 895 fade out thinner should be applied in thin layers, in 1-2 passes, to the contact area between old paint coating and the newly-applied coat. Two working methods may be used: Method I (recommended): Apply a thin layer of fade out thinner immediately after each layer of clearcoat is applied. Method II: Apply a thin layer of fade out thinner immediately after the final layer of clearcoat is applied. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral KLAR 505 Spectral H months/20 C Spectral PLAST 775 Spectral EXTRA 895 SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a coat with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral KLAR 505 Spectral H l 0.15 l 0.20 l 0.25 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 72 g 108 g 144 g 180 g 216 g 288 g 360 g 540 g 720 g 1440 g 25 g 37 g 50 g 62 g 75 g 100 g 125 g 187 g 249 g 498 g 35

36 Spectral KLAR 535 MAT TWO-COMPONENT MATT ACRYL CLEARCOAT PROPERTIES: High-quality matt coating High scratching resistance (SR) HS process - high solids content Very good flowability Fast drying Increased chemical resistance RELATED PRODUCTS: Spectral H 6125: Hardener, standard, fast, slow Spectral SOLV 855: Standard, fast, slow and extra slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent SUBSTRATES Base layers Spectral BASE Dry matt surface. Slightly mat if necessary. Base layers Spectral WAVE Dry matt surface. Slightly mat if necessary. The product is also compatible with most of commercial thinner and water-borne basecoats. MIXING RATIO Volume ratio Weight ratio Spectral KLAR 535 MAT Spectral H Spectral SOLV 855 0,2 0, Application notes: The longer the curing time is, the less is the coat prone to clouding, especially on large surfaces at high temperatures. Using a slow thinner and a higher thinning rate improves the distribution of the matting additives in the coat. VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit * 840 g/l Actual VOC content 545 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS It is recommended to apply the clearcoat over 15 C and under a humidity of 80%. Under these conditions the cured coating can be used after a minimum of 14 hours. APPLICATION Nozzle Pressure Distance Traditional gravity spray gun mm 3 4 bar cm HVLP gravity spray gun mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers 2-3 Single dry layer thickness μm 2 The yield of the ready to use mixture 8 m /l for the given range of dry layer thickness at 50 μm Mixture life at 20 C 2 h Flash-off time between layers 5 10 min 36 CURING TIMES Dust-free Tack-free H 6125 Standard 20 C 60 C 25 min 5 min 3 hours 10 min

37 ADDITIVES CURING TIMES H 6125 Standard 20 C 60 C Operating hardness Ending hardness 14 hours 7 days 45 min 45 mins + 1 day / 20 C CAUTION: The curing times apply to the temperature of specific elements. The coating is ready for hot curing in 30 minutes from application of the last layer. IR DRYING Distance Follow the equipment manufacturer's guidelines Time, depending on lamp type and power min. CAUTION: Start IR heating after at least 10 mins from applying the last layer. RELATED PRODUCTS, DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral H 6125 Fast Standard Slow Slow Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT In order to increase the elasticity of the paint coating of plastic elements or to increase the resistance of the coating to impact by stones (e.g. front fascia, hood), add 10% (by volume ratio) of Spectral PLAST 775 on the finished mixture of Spectral KLAR 535 Mat and Spectral H 6125 and adjust the thinner quantity as appropriate. Adding Spectral PLAST 775 will, however, increase gloss. GLOSS LEVELS WITH CLEARCOATS Due to the various versions of acryl coats, varying gloss levels can be obtained. It is recommended to do a test spray to check the obtained gloss. Mixing volume ratio: Gloss Spectral KLAR 535 MAT / any Spectral gloss acryl clearcoat 75 / 25 Semi-gloss 90 / 10 Semi-matt 100 / 0 Matt EQUIPMENT CLEANING SOLV 855 acrylic thinner or NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral KLAR 535 MAT Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 SAFETY See the Safety Data Sheet OTHER INFORMATION WEIGHT CONTENTS OF COMPONENTS 2:1:0,2: CAUTION! In order to obtain a coat with suitable parameters, it is very important to precisely dose the specific components. Mixture amount Spectral KLAR 535 MAT Spectral H 6125 Spectral SOLV l 65 g 31.6 g 5.6 g 0.15 l 98 g 47 g 8 g 37

38 OTHER INFORMATION WEIGHT CONTENTS OF COMPONENTS 2:1:0,2: CAUTION! In order to obtain a coat with suitable parameters, it is very important to precisely dose the specific components. Mixture amount Spectral KLAR 535 MAT Spectral H 6125 Spectral SOLV l 130 g 63 g 11 g 0.25 l 163 g 79 g 14 g 0.30 l 195 g 95 g 17 g 0.40 l 260 g 126 g 22 g 0.50 l 325 g 158 g 28 g 0.75 l 488 g 237 g 42 g 1.00 l 650 g 316 g 56 g 2.00 l 1300 g 632 g 111 g OTHER INFORMATION WEIGHT CONTENTS OF COMPONENTS 2:1:0,4: CAUTION! In order to obtain a coat with suitable parameters, it is very important to precisely dose the specific components. Mixture amount Spectral KLAR 535 MAT Spectral H 6125 Spectral SOLV l 61 g 30 g 10.5 g 0.15 l 92 g 45 g 16 g 0.20 l 122 g 60 g 21 g 0.25 l 153 g 74 g 26 g 0.30 l 184 g 89 g 31 g 0.40 l 245 g 119 g 42 g 0.50 l 306 g 149 g 52 g 0.75 l 459 g 223 g 78 g 1.00 l 612 g 298 g 105 g 2.00 l 1224 g 595 g 209 g 38

39 ADDITIVES Spectral KLAR 545 TWO-COMPONENT ACRYLIC CLEARCOAT WITH INCREASED SCRATCH RESISTANCE (SR) New PROPERTIES: Increased scratch resistance (SR) Very short time to polish (15 min/60 C) Curable at lower temperatures, from +10 C High ending hardness when cured both at high and ambient temperatures Perfect flowability RELATED PRODUCTS: Spectral H 6115 Hardener: Fast, Standard, Slow, Extra Slow Spectral PLAST 775: Elasticity increasing agent Spectral EXTRA 895: Fade out thinner SUBSTRATES Base layers Spectral BASE Dry matt surface. Matt down gently if necessary. Base layers Spectral WAVE Dry matt surface. Matt down gently if necessary. Compatible with majority of solvent and waterborne basecoats available on the market. MIXING RATIO Volume ratio Weight ratio Spectral KLAR Spectral H VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit * 840 g/l Actual VOC 535 g/l * For ready to apply mixture acc. to EU Directive 2004/42/EC APPLICATION CONDITIONS It is recommended to apply the clearcoat at a temperature above 10 C and humidity of no more than 80%. Under these conditions the cured coating can be used after a minimum of 15 hours. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 2 4 bar cm AUTION: Follow Low-pressure spray gun Gravity fed HVLP gun mm 2 bar cm C the equipment manufacturer's guidelines Number of layers Single dry layer thickness μm 2 The yield of the ready to use mixture 8.5 m /l for the given range of dry layer thickness at 50 μm Mixture life at 20 C 30 min Flash-off time between layers 5 10 min Flash-off after the last layer 10 min CURING TIMES H C 60 C Dust-free Tack-free Polishability (operating hardness) Ending hardness CAUTION: 20 min 2 hours 5 hours 4 days 4 min 10 min 15 min 15 min + 3 days/20 C The curing times apply to the temperatures of the individual elements. The cabin temperature shall be higher by approx. 10 C. Drying the coat with a fast hardener at an increased temperature can deteriorate the gloss and make it necessary to polish the coat. 39

40 IR DRYING Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp 7 15 min CAUTION: Start IR heating no sooner than 10 minutes after applying the last layer. RELATED PRODUCTS, DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral H 6115 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT In order to increase the elasticity of the paint coating of plastic elements or to increase the resistance of the coating to mechanical impact (e.g. front fascia, hood), add 10 30% (by volume ratio) of Spectral PLAST 775 to the ready mixture* of Spectral KLAR 545 and Spectral H * The quantities given for Spectral PLAST 775 do not apply to matt and textured finish mixtures. Spectral EXTRA 895 FADE OUT THINNER Apply the Spectral EXTRA 895 fade out thinner in thin layers, in 1-2 passes, to the contact area between the old paint coating and the newly-applied coat. Two working methods may be used: Method I (recommended): apply a thin layer of the fade out thinner immediately after applying each layer of the clearcoat. Method II: apply a thin layer of the fade out thinner immediately after applying the last layer of the clearcoat. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral KLAR 545 Spectral H months/20 C Spectral PLAST 775 Spectral EXTRA 895 SAFETY See the Safety Data Sheet. ADDITIONAL INFORMATION WEIGHT QUANTITY OF COMPONENTS CAUTION! In order to obtain a paint coating with appropriate parameters it is very important to accurately dose the individual components. Mixture quantity Spectral KLAR 545 Spectral H l 0.15 l 0.20 l 0.25 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 74 g 111 g 147 g 184 g 221 g 295 g 368 g 552 g 737 g 1473 g 25 g 37 g 50 g 62 g 74 g 99 g 124 g 186 g 248 g 496 g 40

41 ADDITIVES Spectral KLAR 555 TWO-COMPONENT CLEARCOAT WITH INCREASED SCRATCH RESISTANCE (SR) PROPERTIES: Increased scratch resistance (SR) HS technology high solid content Perfect flowability High ending hardness Increased chemical resistance RELATED PRODUCTS: Spectral H 6115: Hardener: Fast, Standard, Slow, Extra Slow Spectral SOLV 855: Standard, fast, slow and extra slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent Spectral S-D10: Matting additive Spectral EXTRA 895: Fade out Thinner SUBSTRATES Spectral BASE base layers Dried matt surface. Mat gently if necessary. Spectral WAVE base layers Dried matt surface. Mat gently if necessary. Compatible with majority of solvent basecoats and water basecoats available on the market. MIXING RATIO HS version MS version Volume ratio Weight ratio Volume ratio Weight ratio Spectral KLAR Spectral H Spectral SOLV VISCOSITY DIN 4/20 C s s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit * 840 g/l Actual VOC content 500 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The coat should be applied at a temperature above 15 C and a humidity of no more than 80 %. Under such conditions, the hardened coating can be used after no less than 14 hours. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm MS version HS version CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers Single dry layer thickness μm μm 2 Yield of the ready to apply mixture for a dry 8 m /l layer thickness in the provided range at 50 μm H 6115 (standard) H 6115 (fast) Mixture life at 20 C 2 hours 30 min Flash-off time between layers 5 10 min 41

42 DRYING TIMES H 6115 standard 20 C 60 C Dust-free 35 min. 5 min. Tack-free 4 hours 10 min. Operating hardness 14 hours 45 min. Ending hardness 7 days 45 min. + 1 day/20 C CAUTION: Drying times apply to the temperatures of the individual elements. Drying the coat with a fast hardener at an increased temperature can deteriorate the gloss and make it necessary to polish the coat. RELATED PRODUCTS, DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral H 6115 Fast Standard Slow Extra Slow Spectral SOLV 855 Fast Standard Slow Extra Slow DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp min. CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % (vol.) of Spectral PLAST 775 per ready to apply mixture (Spectral KLAR 555* with Spectral H 6115). * the provided quantity of Spectral PLAST 775 does not apply to coats with a mat or texture effect Spectral S-D10 MATTING ADDITIVE Depending on the desired gloss, the additive can be used in a quantity of % vol. per coat (without the hardener). Its use influences the mixture s viscosity, which should be taken into account when using a thinner. Add the hardener only in a quantity per Spectral KLAR 555. Volume ratio % Gloss 70 semigloss 100 matt Spectral EXTRA 895 FADE OUT THINNER Spectral EXTRA 895 fade out thinner should be applied in thin layers, in 1-2 passes, to the contact area between old paint coating and the newly-applied coat. Two working methods may be used: Method I (recommended): Apply a thin layer of fade out thinner immediately after each layer of clearcoat is applied. Method II: Apply a thin layer of fade out thinner immediately after the final layer of clearcoat is applied. EQUIPMENT CLEANING SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral KLAR 555 Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral S-D10 Spectral EXTRA

43 ADDITIVES SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION COMPONENT QUANTITY BY WEIGHT, HS VERSION CAUTION! In order to obtain a coat with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral KLAR 555 Spectral H l 0.15 l 0.20 l 0.25 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 67 g 100 g 134 g 167 g 200 g 268 g 334 g 500 g 669 g 1338 g 33 g 50 g 66 g 83 g 100 g 132 g 166 g 250 g 333 g 666 g COMPONENT QUANTITY BY WEIGHT, MS VERSION CAUTION! In order to obtain a coat with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral KLAR 555 Spectral H 6115 Spectral SOLV l 0.15 l 0.20 l 0.25 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 63 g 94 g 125 g 156 g 188 g 250 g 313 g 469 g 626 g 1252 g 31 g 47 g 62 g 78 g 94 g 124 g 157 g 233 g 311 g 622 g 5.5 g 8 g 11 g 14 g 16 g 22 g 28 g 41 g 55 g 110 g 43

44 Spectral KLAR 565 TWO-COMPONENT VHS CLEARCOAT PROPERTIES: Very short time to polishing (15 min/60 C or 30 min/50 C) Long open time which allows for painting large areas (whole car) High ending hardness curing at room and elevated temperature Perfect flowability Very high solid particle content (> 60 %) RELATED PRODUCTS: Spectral H 6115: Hardener: Fast, Standard, Slow, Extra Slow Spectral PLAST 775: Elasticity increasing agent Spectral EXTRA 895: Fade out Thinner SUBSTRATES Spectral BASE base layers Dried matt surface. Mat gently if necessary. Spectral WAVE base layers Dried matt surface. Mat gently if necessary. Compatible with majority of solvent basecoats and water basecoats available on the market. MIXING RATIO Volume ratio Weight ratio Spectral KLAR Spectral H VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/d limit * 420 g/l Actual VOC content 415 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The coat should be applied at a temperature above 15 C and a humidity of no more than 80 %. Under such conditions, the hardened coating can be used after no less than 10 hours. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 2 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers 1.5 Single dry layer thickness μm 2 Yield of the ready to apply mixture for a dry 10.6 m /l layer thickness in the provided range at 50 μm Mixture life at 20 C 30 min Flash off between layers 5-10 min Flash-off after the last coating 10 min DRYING TIMES H 6115 standard 20 C 60 C Dust-free 25 min 4 min Tack-free 2.5 hours 10 min Polishability (operating hardness) 7 hours 15 min Ending hardness 4 days 20 min + 3 days/20 C 44

45 ADDITIVES CAUTION: Drying times apply to the temperatures of the individual elements. The cabin temperature shall be approximately 10 C higher. Drying the coat with a fast hardener at an increased temperature can deteriorate the gloss and make it necessary to polish the coat. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp 7 15 min. CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. RELATED PRODUCTS, DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral H 6115 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % of Spectral PLAST 775 per ready to apply mixture (Spectral KLAR 565 and Spectral H 6115). * the provided quantity of Spectral PLAST 775 does not apply to mixtures with a mat or texture effect Spectral EXTRA 895 FADE OUT THINNER Spectral EXTRA 895 fade out thinner should be applied in thin layers, in 1-2 passes, to the contact area between old paint coating and the newly-applied coat. Two working methods may be used: Method I (recommended): Apply a thin layer of fade out thinner immediately after each layer of clearcoat is applied. Method II: Apply a thin layer of fade out thinner immediately after the final layer of clearcoat is applied. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral KLAR 565 Spectral H months/20 C Spectral PLAST 775 Spectral EXTRA 895 SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a coat with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral KLAR 565 Spectral H l 0.15 l 0.20 l 0.25 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 66 g 99 g 132 g 166 g 199 g 265 g 331 g 496 g 662 g 1324 g 34 g 50 g 67 g 84 g 101 g 134 g 167 g 251 g 335 g 670 g 45

46 Spectral KLAR 575 TWO-COMPONENT CLEARCOAT WITH INCREASED SCRATCH RESISTANCE (SR) PROPERTIES: Increased scratch resistance (SR) MS technology easy application Perfect flowability Fast drying Easy adaptation to changing application conditions RELATED PRODUCTS: Spectral H 6125: Standard, fast and slow hardeners Spectral SOLV 855: Standard, fast, slow and extra slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent Spectral S-D10: Matting additive Spectral EXTRA 895: Fade out Thinner SUBSTRATES Spectral BASE base layers Dried matt surface. Mat gently if necessary. Spectral WAVE base layers Dried matt surface. Mat gently if necessary. Compatible with majority of solvent basecoats and water basecoats available on the market. MIXING RATIO Volume ratio Weight ratio Spectral KLAR Spectral H Spectral SOLV VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit * 840 g/l Actual VOC content 565 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The coat should be applied at a temperature above 15 C and a humidity of no more than 80 %. Under such conditions, the hardened coating can be used after no less than 14 hours. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers 2 3 Single dry layer thickness μm 2 Yield of the ready to apply mixture for a dry 7.2 m /l layer thickness in the provided range at 50 μm Mixture life at 20 C H 6125 (slow, standard) H 6125 (fast) 2 hours 30 min. Flash off between layers 5 10 min DRYING TIMES H 6125 standard 20 C 60 C Dust-free 25 min. 5 min. Tack-free 3 hours 10 min. 46

47 ADDITIVES DRYING TIMES H 6125 standard 20 C 60 C Operating hardness 14 hours 45 min. Ending hardness 7 days 45 min. + 1 day/20 C CAUTION: Drying times apply to the temperatures of the individual elements. Drying the coat with a fast hardener at an increased temperature can deteriorate the gloss and make it necessary to polish the coat. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp min. CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. RELATED PRODUCTS, DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral H 6125 Fast Standard Slow Slow Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % (vol.) of Spectral PLAST 775 per ready to apply mixture (Spectral KLAR 575* with Spectral H 6125). * the provided quantity of Spectral PLAST 775 does not apply to coats with a mat or texture effect Spectral S-D10 MATTING ADDITIVE Depending on the desired gloss, the additive can be used in a quantity of % vol. per coat (without the hardener). Its use influences the mixture s viscosity, which should be taken into account when using a thinner. Add the hardener only in a quantity per Spectral KLAR 575. Volume ratio % Gloss 70 Semi-matt 100 Matt Spectral EXTRA 895 FADE OUT THINNER Spectral EXTRA 895 fade out thinner should be applied in thin layers, in 1-2 passes, to the contact area between old paint coating and the newly-applied coat. Two working methods may be used: Method I (recommended): Apply a thin layer of fade out thinner immediately after each layer of clearcoat is applied. Method II: Apply a thin layer of fade out thinner immediately after the final layer of clearcoat is applied. EQUIPMENT CLEANING SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral KLAR 575 Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral S-D10 Spectral EXTRA

48 SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a coat with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral KLAR 575 Spectral H 6125 Spectral SOLV l 0.15 l 0.20 l 0.25 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 60 g 89 g 119 g 149 g 179 g 238 g 298 g 446 g 595 g 1190 g 30 g 44 g 59 g 74 g 89 g 119 g 149 g 223 g 297 g 594 g 10.5 g 16 g 21 g 26 g 31 g 42 g 52 g 78 g 105 g 210 g 48

49 ADDITIVES Spectral UNDER 325 TWO-COMPONENT ACRYLIC FILLER PROPERTIES: Acrylic "wet on wet primer with reduced volatile organic compounds (VOC) content Superb flowability Smooth surface Fast drying Perfect adhesion to numerous substrates Spectral shades of grey system RELATED PRODUCTS: Spectral H 6525: Hardener Spectral SOLV 855: Standard, fast, slow and extra slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent Spectral PLAST 825: Plastic adhesion increasing agent Spectral EXTRA 755: Acrylic filler accelerating agent Spectral EXTRA 745: Filler Dye SUBSTRATES Old paint coatings, including thermoplastic paints Degrease, dry sand P220 P360. Polyester putties Dry sand, for final sanding P240 P320. Epoxy primers Till 12 hours without sanding, after 12 hours sand dry P320. Steel Degrease, dry sand P120. Stainless steel Wash primers Plastics Polypropylene PP and its mixtures (e.g. PP/EPDM) Degrease. Apply after drying. Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, degrease again. Apply the Spectral PLAST 825 or apply the Spectral PLAST 705 adhesion increasing agent. If necessary, apply the Spectral PLAST 775 elasticity increasing agent. Plastics PC, PA, PPO, PVC, PBT. Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, ABS, degrease again. If necessary, apply the Spectral PLAST 775 elasticity increasing agent. Polyester laminates Degrease, dry sand P280. SPECTRAL GREY SYSTEM P1 P2 P3 P4 P5 P1: 100 % P5: 0 % P1: 90 % P5: 10 % P1: 70 % P3: 30 % P1: 99,8 % EXTRA 745: 0,2 % P1: 70 % P5: 30 % P1: 99,3% EXTRA 745: 0,7% P1: 30 % P5: 70 % P3: 50 % P5: 50 % P1: 97% EXTRA 745: 3 % P3: 98 % EXTRA 745: 2 % P1: 0 % P5: 100 % Max. 3% of EXTRA 745 to improve the coverage strength CAUTION: Mix the fillers or the additive at the recommended ratios (by weight or volume) before adding the hardener and the thinner. Spectral EXTRA 745 FILLER DYE A special additive to increase the hiding power in black acrylic fillers; when used at specific mixing ratios, the product gives grades of grey. Maximum quantity: 3% by weight. Overdosing the EXTRA 745 additive may reduce sandability of the filler and result in loss of adhesion. 49

50 MIXING RATIO Priming version Wet on wet version Volume ratio Weight ratio Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV VISCOSITY Priming version Wet on wet version DIN 4/20 C s s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/c limit * 540 g/l Actual VOC content, priming version 516 g/l Actual VOC content, wet on wet version 539 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE 539 g/l APPLICATION CONDITIONS The primer should be applied at a temperature above 15 C and a humidity of no more than 80 %. APPLICATION Priming version Wet on wet version Nozzle Pressure Distance Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers CAUTION: Apply the following system layers after no more than 3 hours. After 3 hours, Spectral UNDER 325 should be sanded. Single dry layer thickness Priming version Wet on wet version μm μm 2 2 Yield of the ready to apply mixture for a dry 8.2 m /l 13 m /l layer thickness in the provided range at 50 μm at 30 μm Mixture life at 20 C 60 min 90 min Flash off between layers min 5 10 min DRYING TIMES 20 C 60 C 3 hours 30 min CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer Time depending on the type and power of the lamp min. CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. SANDING Dry sanding P360 P500 Wet sanding P

51 ADDITIVES RELATED PRODUCTS DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % of Spectral PLAST 775 per ready to apply mixture (Spectral UNDER 325 with Spectral H 6525), correcting the amount of the thinner accordingly. Spectral PLAST 825 PLASTIC ADHESION INCREASING AGENT In order to increase the adhesion of the paint to plastic elements (especially made of PP and its mixtures), add Spectral PLAST 825 at 30% (by volume) of Component A. Spectral EXTRA 755 ACRYLIC FILLER ACCELERATING AGENT Add Spectral EXTRA 755 at 10% per Component A to reduce the curing time and adjust the thinner volume accordingly. The time to sand can even be reduced to 2 hours only, depending on the volume of additive used. The additive greatly reduces the application life. Do not use with the wet on wet version or at temperatures above 30 C. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral UNDER 325 Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral PLAST 825 Spectral EXTRA months/20 C Spectral EXTRA 755 SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION Spectral UNDER 325, PRIMING VERSION COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a primer with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral UNDER 325 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 104 g 208 g 311 g 415 g 519 g 779 g 1038 g 2076 g 20 g 40 g 61 g 81 g 101 g 152 g 202 g 404 g 16 g 32 g 49 g 65 g 81 g 122 g 162 g 324 g 51

52 ADDITIONAL INFORMATION Spectral UNDER 325, WET ON WET VERSION COMPONENT QUANTITY BY WEIGHT: Mixture quantity Spectral UNDER 325 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 98 g 196 g 293 g 391 g 489 g 734 g 978 g 1956 g 19 g 38 g 57 g 76 g 95 g 143 g 190 g 380 g 20 g 41 g 61 g 81 g 102 g 152 g 203 g 406 g Example amounts of ingredients to achieve grey scale levels with the use of the EXTRA 745 filler dye. Spectral UNDER 325, PRIMING VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 325 P1 Under 325 P3 Extra 745 H 6525 SOLV 855 P g 2.0 g 202 g 162 g 1.0 l P g 7.0 g 202 g 162 g P g 31.0 g 202 g 162 g P g 21.0 g 202 g 162 g Spectral UNDER 325, WET ON WET VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 325 P1 Under 325 P3 Extra 745 H 6525 SOLV 855 P2 976 g 2.2 g 190 g 203 g 1.0 l P3 971 g 7.0 g 190 g 203 g P4 949 g 29.0 g 190 g 203 g P4 958 g 20.0 g 190 g 203 g Example amounts of ingredients when using the Spectral EXTRA 755 acrylic filler accelerating agent at 10% by volume per Component A. Spectral UNDER 325, PRIMING VERSION Mixture quantity Spectral UNDER 325 Spectral EXTRA 755 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 104 g 208 g 311 g 415 g 519 g 1038 g 6.0 g 11 g 17 g 23 g 28 g 56 g 20 g 40 g 61 g 81 g 101 g 202 g 10 g 21 g 32 g 42 g 53 g 106 g Example amounts of ingredients when using the Spectral PLAST 825 plastic adhesion increasing agent at 30% by volume per Component A. Spectral UNDER 325, PRIMING VERSION Mixture quantity Spectral UNDER 325 Spectral H 6525 Spectral SOLV 855 SpectralPLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 85 g 170 g 256 g 341 g 427 g 853 g 17 g 34 g 51 g 69 g 86 g 172 g 14 g 28 g 41 g 55 g 69 g 138 g 14 g 28 g 43 g 57 g 72 g 144 g 52

53 ADDITIVES Spectral UNDER 325, WET ON WET VERSION Mixture quantity Spectral UNDER 325 Spectral H 6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 81 g 162 g 243 g 325 g 406 g 812 g 16 g 33 g 49 g 65 g 82 g 163 g 17 g 35 g 52 g 70 g 87 g 175 g 14 g 27 g 41 g 55 g 68 g 137 g 53

54 Spectral UNDER TWO-COMPONENT ACRYLIC FILLER, WET-ON-WET, VHS New PROPERTIES: Wet-on-wet acrylic fillerwith reduced volatile organic compound (VOC) content Can be applied at high temperatures Perfect flowability Smooth surface Fast drying Excellent adhesion to different substrates RELATED PRODUCTS: Spectral H 6115: Hardener: Standard, Fast, Slow, Extra Slow Spectral SOLV 855: Acrylic thinner: Standard, Fast, Slow, Extra Slow Spectral PLAST 775: Elasticity increasing agent Spectral PLAST 825: Plastic adhesion increasing agent SUBSTRATES Old paint coatings, including thermoplastic paints Degrease and dry sand with P220 P360. Polyester putties Dry sand, finishing levelling with P240 P320. Epoxy primers No sanding for up to 12 hours, sand with P320 afterwards. Steel Degrease and dry sand with P120. Stainless steel Degrease. Wash primers Apply when dry. Plastics: Degrease with the Spectral PLAST 815 Degreaser for plastics, matt down Polypropylene (PP) and mixtures with a needle cloth, and degrease again. thereof (e.g. PP/EPDM) Apply the Spectral PLAST 825 Plastic adhesion increasing agent or Spectral PLAST 705 Adhesion increasing agent. If necessary, use the Spectral PLAST 775 Elasticity increasing agent. Plastics Degrease with the Spectral PLAST 815 Degreaser for plastics, matt down with a ABS, PC, PA, PPO, PVC, PBT needle cloth and degrease again If necessary, use the Spectral PLAST 775 Elasticity increasing agent. Polyester laminates Degrease and dry sand with P280. MIXING RATIO Priming version Wet on wet version Volume ratio Weight ratio Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV VISCOSITY Priming version Wet on wet version DIN 4/20 C s s VOC CONTENT VOC II/B/c limit * 540 g/l VOC actual, wet-on-wet version 530 g/l VOC actual, priming version 480 g/l * For ready to apply mixture acc. to EU Directive 2004/42/EC APPLICATION CONDITIONS It is recommended to apply the filler at over 15 C and at a humidity of 80% or lower. 54

55 ADDITIVES APPLICATION Priming version Wet on wet version Nozzle Pressure Distance Nozzle Pressure Distance Follow the equipment manufacturer's guidelines Conventional gravity fed spray gun mm 3 4 bar cm mm 3 4 bar cm Low-pressure spray gun mm 2 bar cm mm 2 bar cm Gravity fed HVLP gun Number of layers CAUTION: Recoat the systems within 3 hours. Sand down Spectral Under after 3 hours. Single dry layer thickness Priming version Wet on wet version μm μm 2 2 The yield of the ready to use mixture for 8.2 m /l 13 m /l the given range of dry layer thickness at 50 μm at 30 μm Mixture life at 20 C 60 min 90 min Flash-off time between layers min 5 10 min CURING TIMES 20 C 60 C 2 hours 20 min CAUTION: Drying times apply to the temperatures of the individual elements. IR DRYING Distance Time depending on the type and power of the lamp Follow the equipment manufacturer's guidelines minutes CAUTION: Start IR heating no sooner than 10 minutes after applying the last layer. SANDING Dry sanding P360 P500 Wet sanding P RELATED PRODUCTS DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral H 6115 Standard Standard Slow Extra Slow Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT In order to increase the paint coating elasticity on plastic details or to increase the resistance of the coating to mechanical damage (e.g. to the front fascia or hood), add Spectral PLAST 775 at 10-30% (by volume ratio) of the ready to use mixture of Spectral Under and Spectral H 6115, and adjust the volume of the thinner. Spectral EXTRA 825 PLASTIC ADHESION INCREASING AGENT In order to increase the paint coating adhesion to plastic details (especially those made of PP and its mixtures), add Spectral EXTRA 825 at 30% (by volume ratio) of component A. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent STORAGE CONDITIONS Store in a cool dry room, away from sources of fire and heat. Avoid direct exposure to sunlight. 55

56 SHELF LIFE Spectral Under Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral PLAST 825 SAFETY See the Safety Data Sheet. Spectral UNDER PRIMING VERSION COMPONENT WEIGHT AMOUNTS Mixture quantity Spectral Under Spectral H 6115 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l 100 g 201 g 302 g 403 g 503 g 1007 g 2013 g 16 g 33 g 50 g 66 g 82 g 165 g 330 g 15 g 30 g 45 g 59 g 74 g 148 g 296 g Spectral UNDER WET-ON-WET VERSION COMPONENT WEIGHT AMOUNTS Mixture quantity Spectral Under Spectral H 6115 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l 86 g 173 g 259 g 345 g 431 g 863 g 1726 g 14 g 28 g 42 g 57 g 71 g 141 g 283 g 25 g 51 g 76 g 102 g 127 g 225 g 508 g Example component amounts for the application of the Spectral EXTRA 755 Acrylic filler accelerating agent at 10% (by volume ratio) of Component A. Spectral UNDER PRIMING VERSION Mixture quantity Spectral Under Spectral H 6115 Spectral SOLV 855 Spectral EXTRA l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 101 g 201 g 302 g 403 g 503 g 1007 g 16 g 33 g 50 g 66 g 82 g 165 g 9 g 18 g 27 g 36 g 46 g 89 g 6 g 12 g 18 g 24 g 30 g 60 g Spectral UNDER WET-ON-WET VERSION Mixture quantity Spectral Under Spectral H 6115 Spectral SOLV 855 Spectral EXTRA l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 86 g 173 g 259 g 345 g 431 g 863 g 14 g 28 g 42 g 60 g 71 g 141 g 20 g 41 g 61 g 81 g 102 g 203 g 5 g 10 g 15 g 20 g 26 g 51 g 56

57 ADDITIVES Example component amounts for the application of the Spectral PLAST 825 Plastic adhesion increasing at 30% (by volume ratio) of Component A. Spectral UNDER PRIMING VERSION Mixture quantity Spectral Under Spectral H 6115 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 84 g 167 g 252 g 336 g 419 g 839 g 14 g 28 g 41 g 55 g 69 g 137 g 12 g 25 g 37 g 49 g 62 g 124 g 15 g 31 g 46 g 62 g 77 g 154 g Spectral UNDER WET-ON-WET VERSION Mixture quantity Spectral Under Spectral H 6115 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 74 g 147 g 221 g 295 g 368 g 737 g 12 g 24 g 36 g 48 g 60 g 121 g 22 g 43 g 65 g 87 g 108 g 217 g 14 g 27 g 41 g 54 g 68 g 136 g 57

58 Spectral UNDER 335 TWO-COMPONENT ACRYLIC FILLER PROPERTIES: Universal acrylic filler Can be used as filler or insulator Special anticorrosive additives Spectral shades of grey system Smooth surface RELATED PRODUCTS: Spectral H 6525: Hardener Spectral SOLV 855: Standard, fast, slow and extra slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent Spectral PLAST 825: Plastic adhesion increasing agent Spectral EXTRA 755: Acrylic filler accelerating agent Spectral EXTRA 745: Filler Dye SUBSTRATES Old paint coatings, including thermoplastic paints Degrease, dry sand P220 P360. Polyester putties Dry sand, for final sanding P240 P320. Epoxy primers Till 12 hours without sanding, after 12 hours sand dry P320. Steel Degrease, dry sand P120. Stainless steel Wash primers Plastics Polypropylene PP and its mixtures (e.g. PP/EPDM) Degrease. Apply after drying. Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, degrease again. Apply the Spectral PLAST 825 or apply the Spectral PLAST 705 adhesion increasing agent. If necessary, apply the Spectral PLAST 775 elasticity increasing agent. Plastics ABS, PC, PA, PPO, PVC, PBT. Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, degrease again. If necessary, apply the Spectral PLAST 775 elasticity increasing agent. Polyester laminates Degrease, dry sand P280. SHADES OF GREY P1 P2 P3 P4 P5 P1: 100% P5: 0% P1: 90% P5: 10% P1: 70% P3: 30% P1: 99,7% EXTRA 745: 0,3% P1: 70% P5: 30% P1: 99% EXTRA 745: 1% P1: 30% P5: 70% P3: 50% P5: 50% P1: 97% EXTRA 745: 3% P3: 98 % EXTRA 745: 2% P1: 0% P5: 100% Max. 3% of EXTRA 745 to improve the coverage strength CAUTION: Mix the fillers or the additive at the recommended ratios (by weight or volume) before adding the hardener and the thinner. Spectral EXTRA 745 FILLER DYE A special additive to increase the hiding power in black acrylic fillers; when used at specific mixing ratios, the product gives grades of grey. Maximum quantity: 3% by weight. Overdosing the EXTRA 745 additive may reduce sandability of the filler and result in loss of adhesion. 58

59 ADDITIVES MIXING RATIO Filling version Priming version Volume ratio Weight ratio Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV VISCOSITY Filling version Priming version DIN 4/20 C s s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/c limit * 540 g/l Actual VOC content, filling version 500 g/l Actual VOC content, priming version 530 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The primer should be applied at a temperature above 15 C and a humidity of no more than 80%. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers 1 3 Single dry layer thickness Filling version Priming version μm μm 2 2 Yield of the ready to apply mixture for 4.3 m /l 7.9 m /l a dry layer thickness in the provided range at 100 μm at 50 μm Potlife at 20 C 1 hour Flash-off time between layers 5 10 min DRYING TIMES 20 C 60 C 3 hours 30 min CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp minutes CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. SANDING Dry sanding P360 P500 Wet sanding P RELATED PRODUCTS DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral SOLV 855 Fast Standard Slow Extra Slow 59

60 Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % of Spectral PLAST 775 per ready to apply mixture (Spectral UNDER 335 with Spectral H 6525), correcting the amount of the thinner accordingly. Spectral PLAST 825 PLASTIC ADHESION INCREASING AGENT In order to increase the adhesion of the paint to plastic elements (especially made of PP and its mixtures), add Spectral PLAST 825 at 30% (by volume) of Component A. Spectral EXTRA 755 Acrylic filler accelerating agent Add Spectral EXTRA 755 at 10% per Component A to reduce the curing time and adjust the thinner volume accordingly. The time to sand can even be reduced to 2 hours only, depending on the volume of additive used. The additive greatly reduces the application life. Do not use with the wet on wet version or at temperatures above 30 C. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral UNDER 335 Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral PLAST 825 Spectral EXTRA months/20 C Spectral EXTRA 755 SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION Spectral UNDER 335, WET ON WET VERSION The wet on wet version is intended for use in industrial installations and in countries where regulations of Directive 2004/42/EC of the European Parliament and of the Council of April 21, 2004 on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain paints and varnishes and vehicle refinishing products do not apply. MIXING RATIO Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV 855 (slow) 3 36 VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS* Actual VOC content* * For ready to apply mixture APPLICATION CONDITIONS The primer should be applied at a temperature above 15 C. 570 g/l 60

61 ADDITIVES APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Number of layers 1 2 Single dry layer thickness μm 2 Yield of the ready to apply mixture for 11.7 m /l a dry layer thickness in the provided range at 30 μm Mixture life at 20 C 2 hours Flash off between layers 5 10 min SOLV 855 ACRYLIC THINNER Surface C C C Small 1-2 elements, spot repairs Medium 3-5 elements Large more than 5 elements Spectral H 6525 Spectral SOLV 855 (standard) Spectral H 6525 Spectral SOLV 855 (standard) Spectral H 6525 Spectral SOLV 855 (slow) Spectral H 6525 Spectral SOLV 855 (slow) Spectral H 6525 Spectral SOLV 855 (slow) Spectral H 6525 Spectral SOLV 855 (slow) Spectral H 6525 Spectral SOLV 855 (slow) Spectral H 6525 Spectral SOLV 855 (slow) Spectral H 6525 Spectral SOLV 855 (slow) Spectral UNDER 335, FILLING VERSION CAUTION! In order to obtain a primer with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l Spectral UNDER 335, PRIMING VERSION Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l Spectral UNDER 335, WET ON WET VERSION Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 116 g 231 g 347 g 462 g 578 g 1155 g 2310 g 101 g 202 g 303 g 404 g 505 g 1010 g 2020 g 90 g 180 g 270 g 360 g 14 g 28 g 41 g 55 g 69 g 138 g 276 g 12 g 24 g 36 g 48 g 61 g 121 g 242 g 10.7 g 21 g 32 g 43 g 13 g 25 g 38 g 50 g 63 g 126 g 2524 g 22 g 44 g 66 g 88 g 110 g 220 g 440 g 29 g 59 g 88 g 117 g 61

62 Spectral UNDER 335, WET ON WET VERSION Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV l 1.00 l 2.00 l 450 g 899 g 1798 g 54 g 107 g 214 g 147 g 293 g 586 g Example amounts of ingredients to achieve grey scale levels with the use of the EXTRA 745 filler dye. Spectral UNDER 335, FILLING VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 335 P1 Under 335 P3 Extra 745 H 6525 SOLV 855 P g 3.5 g 138 g 126 g 1.0 l P g 11.5 g 138 g 126 g P g 34.5 g 138 g 126 g P g 23.0 g 138 g 126 g Spectral UNDER 335, PRIMING VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 335 P1 Under 335 P3 Extra 745 H 6525 SOLV 855 P g 3.0 g 121 g 220 g 1.0 l P g 10.0 g 121 g 220 g P4 980 g 30.0 g 121 g 220 g P4 990 g 20.0 g 121 g 220 g Spectral UNDER 335, WET ON WET VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 335 P1 Under 335 P3 Extra 745 H 6525 SOLV 855 P2 897 g 2.5 g 107 g 293 g 1.0 l P3 890 g 9.0 g 107 g 293 g P4 872 g 27.0 g 107 g 293 g P4 881 g 18.0 g 107 g 293 g Example amounts of ingredients when using the Spectral EXTRA 755 acrylic filler accelerating agent at 10% by volume per component A. Spectral UNDER 335, FILLING VERSION Mixture quantity Spectral UNDER 335 Spectral EXTRA 755 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 116 g 231 g 347 g 462 g 578 g 1155 g 6.5 g 13 g 20 g 26 g 33 g 66.5 g 14 g 28 g 41 g 55 g 69 g 138 g 6.5 g 12 g 18 g 24 g 30 g 60 g Spectral UNDER 335, PRIMING VERSION Mixture quantity Spectral UNDER 335 Spectral EXTRA 755 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 101 g 202 g 303 g 404 g 505 g 1010 g 7.5 g 14.5 g 53 g 70 g 88 g 176 g 12 g 24 g 36 g 48 g 61 g 121 g 14.5 g 29.5 g 13 g 18 g 22 g 44 g 62

63 ADDITIVES Example amounts of ingredients when using the Spectral PLAST 825 plastic adhesion increasing agent at 30% by volume per component A. Spectral UNDER 335, FILLING VERSION Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 92 g 183 g 275 g 366 g 458 g 916 g 12 g 23 g 35 g 47 g 59 g 117 g 10 g 21 g 31 g 42 g 52 g 105 g 16 g 33 g 49 g 65 g 82 g 163 g Spectral UNDER 335, PRIMING VERSION Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 82 g 164 g 246 g 328 g 410 g 820 g 10 g 21 g 31 g 42 g 52 g 105 g 19 g 37 g 56 g 75 g 94 g 187 g 14 g 29 g 44 g 58 g 73 g 146 g Spectral UNDER 335, WET ON WET VERSION Mixture quantity Spectral UNDER 335 Spectral H 6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 74 g 148 g 222 g 297 g 371 g 741 g 10 g 19 g 26 g 38 g 47 g 95 g 25 g 51 g 76 g 102 g 127 g 254 g 13 g 27 g 40 g 53 g 66 g 132 g 63

64 Spectral UNDER 345 TWO-COMPONENT WASH PRIMER PROPERTIES: Very good anticorrosive protection Superb adhesion High yield Quick application RELATED PRODUCTS: Spectral H 6915: Hardener SUBSTRATES Steel Degrease, dry sand P120 P240. Aluminium Degrease, mat with an abrasive needled cloth, degrease again. Galvanised steel Degrease, mat with an abrasive needled cloth, degrease again. MIXING RATIO Volume ratio Weight ratio Spectral UNDER Spectral H VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/c limit * 780 g/l Actual VOC content 780 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The primer should be applied at a temperature above 15 C and a humidity of no more than 80 %. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. Number of layers 1 2 Single dry layer thickness 5 10 μm 2 Yield of the ready to apply mixture for a dry 7.0 m /l layer thickness in the provided range at 15 μm Mixture life at 20 C 2 days Flash off between layers 3 5 min Polyester putties and epoxy primers cannot be applied directly to UNDER 345. DRYING TIME 7 min./20 C EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. 64

65 ADDITIVES STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral UNDER 345 Spectral H 6915 SAFETY See Safety Data Sheet. Spectral UNDER 345 COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a primer with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral UNDER 345 Spectral H l 0.20 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 53 g 107 g 160 g 213 g 267 g 400 g 533 g 1066 g 45 g 89 g 134 g 178 g 223 g 334 g 445 g 890 g 65

66 Spectral UNDER 355 TWO-COMPONENT ACRYLIC FILLER PROPERTIES: Filling acrylic primer Application of thick layers is possible Perfect for filling out scratches and substrate irregularities Superb dry mechanical treatment Easy sucking out of dust while sanding RELATED PRODUCTS: Spectral H 6525: Hardener Spectral SOLV 855: Standard, fast, slow and extra slow acrylic thinners Spectral PLAST 775: Elasticity increasing agent Spectral PLAST 825: Plastic adhesion increasing agent Spectral EXTRA 755: Acrylic filler accelerating agent Spectral EXTRA 745: Filler Dye SUBSTRATES Old paint coatings, including thermoplastic paints Degrease, dry sand P220 P360. Polyester putties Dry sand, for final sanding P240 P320. Epoxy primers Till 12 hours without sanding, after 12 hours sand dry P320. Steel Degrease, dry sand P120. Stainless steel Degrease. Wash primers Apply after drying. Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, Plastics degrease again. Polypropylene PP and its mixtures Apply the Spectral PLAST 825 or apply the Spectral PLAST 705 adhesion (e.g. (PP/EPDM) increasing agent. If necessary, apply the Spectral PLAST 775 elasticity increasing agent. Plastics Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, ABS, PC, PA, PPO, PVC, PBT. degrease again. If necessary, apply the Spectral PLAST 775 elasticity increasing agent. Polyester laminates Degrease, dry sand P280. MIXING RATIO Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV 855 (slow) VISCOSITY DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/c limit * 540 g/l Actual VOC content 510 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The primer should be applied at a temperature above 15 C and a humidity of no more than 80 %. 66

67 ADDITIVES APPLICATION CAUTION: Instructions of the equipment manufacturer must be followed. Nozzle Pressure Distance Conventional gravity fed spray gun mm 3 4 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm Number of layers 1 3 Single dry layer thickness μm 2 Yield of the ready to apply mixture for a dry 4.2 m /l layer thickness in the provided range at 100 μm Mixture life at 20 C 1 hour Flash off between layers min Before applying the basecoat, coat the UNDER 355 filler with another Spectral filler/primer: UNDER 325, UNDER 335, UNDER 365 or the epoxy UNDER 385. DRYING TIME 20 C 60 C 3 hours 30 min DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp min CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. SANDING Dry sanding P360 P500 Wet sanding P600 P1000 Spectral SOLV 855 ACRYLIC THINNER C C C +35 C Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT To increase the paint coating s elasticity on plastic elements or to increase the coating s resistance to stone chipping (e.g. front strip, bonnet), add % of Spectral PLAST 775 per ready to apply mixture (Spectral UNDER 355 with Spectral H 6525), correcting the amount of the thinner accordingly. Spectral PLAST 825 PLASTIC ADHESION INCREASING AGENT In order to increase the adhesion of the paint to plastic elements (especially made of PP and its mixtures), add Spectral PLAST 825 at 30% (by volume) of Component A. Spectral EXTRA 755 ACRYLIC FILLER ACCELERATING AGENT Add Spectral EXTRA 755 at 10% per Component A to reduce the curing time and adjust the thinner volume accordingly. The time to sand can even be reduced to 2 hours only, depending on the volume of additive used. The additive greatly reduces the application life. Do not use with the wet on wet version or at temperatures above 30 C. 67

68 Spectral EXTRA 745 FILLER DYE A special additive to increase the hiding power in black acrylic fillers; when used at specific mixing ratios, the product gives grades of grey. Maximum quantity: 3% by weight. Overdosing the EXTRA 745 additive may reduce sandability of the filler and result in loss of adhesion. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral UNDER 355 Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral PLAST 825 Spectral EXTRA months/20 C Spectral EXTRA 755 SAFETY See Safety Data Sheet. Spectral UNDER 355 COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a primer with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral UNDER 355 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 112 g 224 g 335 g 447 g 559 g 839 g 1118 g 2236 g 18 g 37 g 55 g 73 g 92 g 137 g 183 g 366 g 6.5 g 13 g 20 g 26 g 33 g 49 g 65 g 130 g Example amounts of ingredients to achieve grey scale levels with the use of the EXTRA 745 filler dye. Mixture Target grey Spectral Spectral Spectral Spectral quantity scale level Under 355 Extra 745 H 6525 SOLV l P g 5.5 g 183 g 65 g P g 33.5 g 183 g 65 g Example amounts of ingredients when using the Spectral EXTRA 755 acrylic filler accelerating agent at 10% by volume per Component A. Mixture quantity Spectral UNDER 355 Spectral EXTRA 755 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 112 g 224 g 335 g 447 g 559 g 1118 g 7.0 g 14 g 21 g 28 g 35 g 70 g 18 g 37 g 55 g 73 g 92 g 183 g 68

69 ADDITIVES Example amounts of ingredients when using the Spectral PLAST 825 plastic adhesion increasing agent at 30% by volume per Component A. Spectral UNDER 355 Mixture quantity Spectral UNDER 355 Spectral H 6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 93 g 186 g 278 g 371 g 464 g 927 g 15 g 30 g 45 g 60 g 76 g 151 g 5.5 g 11 g 16 g 22 g 27 g 54 g 17 g 34 g 51 g 67 g 84 g 168 g 69

70 Spectral UNDER 355 SPRAY HIGH BUILD ACRYLIC FILLER SPRAY PROPERTIES: Aerosol product Excellent filling properties Special anti-corrosion additives Fast-drying Easy sanding SUBSTRATES Old paint coatings, including thermoplastic coats Degrease and dry sand with P220 P360. Polyester putties Dry sand, finish levelling with P240 P320. Epoxy primers No sanding for up to 12 hours, sand with P320 afterwards. Steel Degrease and dry sand with P120. Wash primers Apply when dry. Polyester laminates Degrease and dry sand with P280. CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit* 840 g/l Actual VOC <650 g/l PROCEDURE Shake the aerosol can for about 2 minutes before use to make the product uniform. Apply 2 3 layers on a properly prepared and degreased surface. Wait until the coating is completely matt after applying each layer. The curing time is minutes at 20 C. CAUTION! Clean the valve after use. To do this, turn the container upside down and spray for ca. 5 seconds until the valve is clear. SHELF LIFE Spectral UNDER years /20 C SAFETY See the Safety Data Sheet. OTHER INFORMATION Filling primer as a spray based on fast-drying acrylic resins. Contains special anti-corrosion additives. Excellent adhesion to typical substrates: old paint coatings, steel. Perfect for spot repairs. When sanded down with P800 P1000, the product constitutes a perfect finish for traditional and water-borne acrylic topcoats and basecoats. 70

71 ADDITIVES Spectral UNDER 365 TWO-COMPONENT ACRYLIC FILLER PROPERTIES: Universal acrylic filler Application without a necessity of sanding on original elements with cataphoretic coating Can be used as a filler or insulator Excellent dry machine sanding Spectral grey system Smooth surface RELATED PRODUCTS: Spectral H 6525: Hardener Spectral SOLV 855: Acrylic thinner, standard, fast, slow and extra slow Spectral PLAST 775: Elasticity increasing agent Spectral PLAST 825: Plastic adhesion increasing agent Spectral EXTRA 755: Acrylic filler accelerating Spectral EXTRA 745: Filler Dye SUBSTRATES Old paint coatings, including thermoplastic paints Degrease and dry sand with P220 P360. Polyester putties Dry sand, finishing levelling with P240 P320. Epoxy primers No sanding for up to 12 hours, sand with P320 afterwards. Steel Degrease and dry sand with P120. Stainless steel Original elements with cataphoretic coating. Wash primers PP plastic and mixtures thereof (i.e. PP/EPDM) Degrease. Degrease with Spectral EXTRA 785 Degreaser, no sanding is necessary. Apply when dry. Degrease with Spectral PLAST 815 Degreaser for Plastics, mat with an abrasive cloth and degrease again. Apply Spectral PLAST 825 or apply Spectral PLAST 705 Adhesion Increasing Agent. If necessary, use Spectral PLAST 775 Elasticity Increasing Agent. Plastics ABS, PC, PA, PPO, PVC, PBT. Degrease with Spectral PLAST 815 Degreaser for Plastics, mat with an abrasive cloth and degrease again. If necessary, use Spectral PLAST 775 Elasticity Increasing Agent. Polyester laminates Degrease and dry sand with P280. SHADES OF GREY P1 P2 P3 P4 P5 P1: 100% P5: 0% P1: 90% P5: 10% P1: 70% P3: 30% P1: 99,7% EXTRA 745: 0,3% P1: 70% P5: 30% P1: 99% EXTRA 745: 1% P1: 30% P5: 70% P3: 50% P5: 50% P1: 97% EXTRA 745: 3% P3: 98 % EXTRA 745: 2% P1: 0% P5: 100% Max. 3% of EXTRA 745 to improve the coverage strength CAUTION: Mix the fillers or the additive at the recommended ratios (by weight or volume) before adding the hardener and the thinner. Spectral EXTRA 745 FILLER DYE A special additive to increase the hiding power in black acrylic fillers; when used at specific mixing ratios, the product gives grades of grey. Maximum quantity: 3% by weight. Overdosing the EXTRA 745 additive may reduce sandability of the filler and result in loss of adhesion. 71

72 MIXING RATIO Filling version Priming version Volume ratio Weight ratio Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV VISCOSITY Filling version Priming version DIN 4/20 C s s VOC CONTENT VOC II/B/c limit * 540 g/l VOC actual, filling version 515 g/l VOC actual, priming version 539 g/l * For ready to use mixture acc. to EU Directive 2004/42/CE APPLICATION CONDITIONS It is recommended to apply the primer over 15 C and under a humidity of 80%. APPLICATION Nozzle Pressure Distance Traditional gravity spray gun mm 3 4 bar cm Low-pressure spray gun Gravity HVLP mm 2 bar cm CAUTION: follow the equipment manufacturer's guidelines Number of coats 1 3 Single dry coat thickness Filling version Priming version μm μm 2 2 Ready to use mixture yield 4.1 m /l 7.8 m /l for the given range of dry coat thickness at 100 μm at 50 μm Mixture life at 20 C 1 hour Flash-off time between coats 5 10 min CURING TIMES 20 C 60 C 3 hours 30 min CAUTION: The curing times apply to the temperature of specific elements. COATABILITY Coatable with Spectral Base 2.0, Spectral Wave 2.0 and Spectral 2K. Apply the topcoat in the wet on wet version after 15 min/20 C. The maximum applicaltion time for the next coat without matting is 7 days. After a minimum of 8 hours from the application, degrease the primer with the Extra 785 universal degreaser. IR DRYING Distance Follow the equipment manufacturer's guidelines Time, depending on lamp type and power minutes CAUTION: Start IR heating after at least 10 mins from applying the last coat. SANDING Dry sanding P360 P500 Wet sanding P

73 ADDITIVES RELATED PRODUCTS DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral PLAST 775 ELASTICITY INCREASING AGENT In order to increase the elasticity of the paint coat on plastic elements or to increase gravel resistance of the coat (i.e. front fascia, hood), add 10 30% of Spectral PLAST 775 on the ready mixture of Spectral UNDER 365 and Spectral H 6525 to adequately correct the amount of the thinner. Spectral PLAST 825 PLASTIC ADHESION INCREASING AGENT In order to increase the adhesion of the paint to plastic elements (especially made of PP and its mixtures), add Spectral PLAST 825 at 30% (by volume) of Component A. Spectral EXTRA 755 ACRYLIC FILLER ACCELERATING AGENT Add Spectral EXTRA 755 at 10% per Component A to reduce the curing time and adjust the thinner volume accordingly. The time to sand can even be reduced to 2 hours only, depending on the volume of additive used. The additive greatly reduces the application life. Do not use with the wet on wet version or at temperatures above 30 C. EQUIPMENT CLEANING Spectral SOLV 855 acrylic thinner or NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral UNDER 365 Spectral H months/20 C Spectral SOLV 855 Spectral PLAST 775 Spectral PLAST 825 Spectral EXTRA months/20 C Spectral EXTRA 755 SAFETY See the Safety Data Sheet OTHER INFORMATION Spectral UNDER 365 WET ON WET VERSION The wet on wet version is intended for application in industrial plants and in the states where the regulations do not apply as of the Directive 2004/42/EC of the European Parliament and of the Council of 21 April 2004 on the limitation of emissions of volatile organic compounds due to the use of organic solvents incertain paints and varnishes and vehicle refinishing products. MIXING RATIO Volume ratio Weight ratio Spectral UNDER Spectral H Spectral SOLV 855 (slow) VISCOSITY DIN 4/20 C s VOC CONTENT* VOC actual * * For ready to use mixture APPLICATION CONDITIONS It is recommended to apply the primer at over 15 C. 590 g/l 73

74 APPLICATION Nozzle Pressure Distance Traditional gravity spray gun mm 3 4 bar cm Number of coats 1 2 Single dry coat thickness μm 2 The yield of the ready to use mixture 11.2 m /l for the given range of dry coat thickness at 30 μm Mixture life at 20 C 1.5 h Flash-off time between coats 5 10 min SRELATED PRODUCTS DEPENDING ON THE PROCESSING TEMPERATURE C C C +35 C Spectral SOLV 855 Fast Standard Slow Extra Slow Spectral UNDER 365 FILLING VERSION WEIGHT CONTENTS OF COMPONENTS: CAUTION! In order to obtain a primer with suitable parameters, it is very important to precisely dose the specific components. Mixture amount Spectral UNDER 365 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l 107 g 214 g 320 g 427 g 534 g 1067 g 2135 g 18 g 36 g 54 g 72 g 90 g 179 g 357 g 8 g 16 g 24 g 32 g 40 g 80 g 160 g Spectral UNDER 365 PRIMING VERSION WEIGHT CONTENTS OF COMPONENTS: Mixture amount Spectral UNDER 365 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l 98 g 196 g 294 g 392 g 489 g 979 g 1957 g 17 g 33 g 49 g 66 g 82 g 164 g 328 g 15 g 29 g 40 g 59 g 73 g 147 g 293 g Spectral UNDER 365 WET ON WET VERSION WEIGHT CONTENTS OF COMPONENTS: Mixture amount Spectral UNDER 365 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 2.00 l 91 g 182 g 273 g 364 g 455 g 910 g 1820 g 15 g 30 g 45 g 60 g 74 g 150 g 300 g 20 g 40 g 61 g 80 g 102 g 200 g 400 g 74

75 ADDITIVES Example amounts of ingredients to achieve grey scale levels with the use of the EXTRA 745 filler dye. Spectral UNDER 365 FILLING VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 365 P1 Under 365 P3 Extra 745 H 6525 SOLV 855 P g 3.5 g 179 g 80 g 1.0 l P g 11.0 g 179 g 80 g P g 32 g 179 g 80 g P g 21 g 179 g 80 g Spectral UNDER 365 PRIMING VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 365 P1 Under 365 P3 Extra 745 H 6525 SOLV 855 P2 976 g 3.0 g 164 g 147 g 1.0 l P3 969 g 10 g 164 g 147 g P4 950 g 29 g 164 g 147 g P4 959 g 20 g 164 g 147 g Spectral UNDER 365 WET ON WET VERSION Mixture Target grey Spectral Spectral Spectral Spectral Spectral quantity scale level Under 365 P1 Under 365 P3 Extra 745 H 6525 SOLV 855 P2 907 g 3.5 g 150 g 200 g 1.0 l P3 901 g 9 g 150 g 200 g P4 883 g 27 g 150 g 200 g P4 892 g 18 g 150 g 200 g Example amounts of ingredients when using the Spectral EXTRA 755 acrylic filler accelerating agent at 10% by volume per component A. Spectral UNDER 365 FILLING VERSION Mixture quantity Spectral UNDER 365 Spectral EXTRA 755 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 107 g 214 g 320 g 427 g 534 g 1067 g 6.5 g 13 g 19 g 26 g 32 g 64 g 18 g 36 g 54 g 72 g 90 g 179 g 1.5 g 3 g 5 g 6 g 8 g 16 g Spectral UNDER 365 PRIMING VERSION Mixture quantity Spectral UNDER 365 Spectral EXTRA 755 Spectral H 6525 Spectral SOLV l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 98 g 196 g 294 g 392 g 489 g 979 g 6 g 12 g 17 g 24 g 29 g 59 g 17 g 33 g 49 g 66 g 82 g 164 g 9 g 17 g 23 g 35 g 44 g 88 g Example amounts of ingredients when using the Spectral PLAST 825 plastic adhesion increasing agent at 30% by volume per component A. 75

76 Spectral UNDER 365 FILLING VERSION Mixture quantity Spectral UNDER 365 Spectral H6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 88 g 177 g 265 g 353 g 441 g 882 g 15 g 30 g 45 g 60 g 74 g 149 g 6.5 g 13 g 20 g 26 g 33 g 66 g 16.5 g 33 g 50 g 66 g 83 g 166 g Spectral UNDER 365 PRIMING VERSION Mixture quantity Spectral UNDER 365 Spectral H6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 82 g 164 g 246 g 328 g 411 g 821 g 14 g 28 g 42 g 55 g 69 g 138 g 12 g 25 g 37 g 49 g 62 g 124 g 15 g 31 g 46 g 62 g 77 g 154 g Spectral UNDER 365 WET ON WET VERSION Mixture quantity Spectral UNDER 365 Spectral H6525 Spectral SOLV 855 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 77 g 154 g 230 g 307 g 384 g 768 g 13 g 26 g 39 g 52 g 65 g 129 g 17 g 35 g 52 g 69 g 87 g 173 g 14 g 29 g 43 g 58 g 72 g 144 g 76

77 ADDITIVES Spectral UNDER 385 TWO-COMPONENT EPOXY PRIMER PROPERTIES: Quick-drying epoxy primer Very good adhesion to metal elements and most plastics, except for PP, PE, PTFE (Teflon) and mixtures thereof Superb anticorrosive resistance Good insulating properties Can be applied wet on wet RELATED PRODUCTS: Spectral H 6985: Hardener Spectral PLAST 825: Plastic adhesion increasing agent Spectral EXTRA 745: Filler Dye SUBSTRATES Old paint coatings, including thermoplastic paints Polyester putties Steel Degrease, dry sand P220 P360. Dry sand, for final sanding P240 P Clean steel surfaces until reaching Sa 2 / 2 (wet blasting) or St3 (manual cleaning or using a power tool) in accordance with the PN-ISO standard; the surface after the treatment must be free from oil, grease, dust, loose old paint coating, mill scale, rust and foreign contaminants; the surface should exhibit the gloss of the metal substrate. Aluminium Degrease, dry sand P280 P360 or mat with an abrasive needled cloth, degrease again. Galvanised steel Degrease, mat with a fine abrasive needled cloth, degrease again. Stainless steel Degrease. Polyester laminates Degrease, dry sand P280. Plastics, except for PP, PE, PTFE Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, degrease again. PP plastic and mixtures thereof Degrease with Spectral PLAST 815 degreaser, mat with a needled cloth, degrease again. Apply the Spectral PLAST 825 or apply the Spectral PLAST 705 adhesion increasing agent. MIXING RATIO Volume ratio Weight ratio Spectral UNDER VISCOSITY Spectral H DIN 4/20 C s CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/c limit * 540 g/l Actual VOC content 537 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The primer should be applied at a temperature above 15 C and a humidity of no more than 80 %. APPLICATION Nozzle Pressure Distance Conventional gravity fed spray gun mm 2 bar cm Low-pressure gravity fed HVLP spray gun mm 2 bar cm CAUTION: Instructions of the equipment manufacturer must be followed. 77

78 APPLICATION Number of layers 1 3 CAUTION: In case of application directly on steel for obtaining the best anticorrosion properties minimum thickness of primer must be 80 μm. Dry coating thickness: 1 layer μm 2 layers μm 3 layers μm 2 Yield of the ready to apply mixture for a dry 13.0 m /l layer thickness in the provided range at 30 μm Mixture life at 20 C 6 hours Flash-off between layers 5 10 min APPLYING THE FILLER TO Spectral UNDER 385 Number of UNDER 385 layers 1 UNDER 385 drying time 30 min CAUTION: Apply the following system layers after no more than 12 hours. After 12 hours, Spectral UNDER 385 should be sanded. APPLYING THE PRIMER OR COLOR COATING TO Spectral UNDER 385 Number of UNDER 385 layers 1 2 UNDER 385 drying time 15 min CAUTION: Apply the following system layers after no more than 12 hours. After 12 hours, Spectral UNDER 385 should be sanded. DRYING TIME Time to sand 20 C 60 C 3 hours 45 min CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp min. CAUTION: Use the radiator no sooner than 10 min. after applying the last layer. SANDING Dry sanding P360 - P500 Wet sanding P600- P1000 Spectral PLAST 825 PLASTIC ADHESION INCREASING AGENT In order to increase the adhesion of the paint to plastic elements (especially made of PP and its mixtures), add Spectral PLAST 825 at 30% (by volume) of Component A. Spectral EXTRA 745 FILLER DYE A special additive to increase the hiding power in black acrylic fillers; when used at specific mixing ratios, the product gives grades of grey. Maximum quantity: 3% by weight. Overdosing the EXTRA 745 additive may reduce sandability of the filler and result in loss of adhesion. EQUIPMENT CLEANING Epoxy thinner. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. 78

79 ADDITIVES SHELF LIFE Spectral UNDER 385 Spectral H 6985 Spectral PLAST 825 Spectral EXTRA months/20 C SAFETY See Safety Data Sheet. Spectral UNDER 385 COMPONENT QUANTITY BY WEIGHT: CAUTION! In order to obtain a primer with appropriate parameters it is very important do exactly dose the individual components. Mixture quantity Spectral UNDER 385 Spectral H l 0.20 l 0.30 l 0.40 l 0.50 l 0.75 l 1.00 l 2.00 l 79 g 158 g 237 g 316 g 395 g 593 g 790 g 1580 g 44 g 87 g 131 g 174 g 218 g 326 g 435 g 870 g Ingredients proportioned by weight with the use of the EXTRA 745 filler dye. Mixture quantity quantity Extra 745 [%] Spectral Under 385 Spectral Extra 745 Spectral H l g 774 g 766 g 8 g 16 g 24 g 435 g 435 g 435 g Example amounts of ingredients when using the Spectral PLAST 825 plastic adhesion increasing agent at 30% by volume per Component A. Spectral UNDER 385 Mixture quantity Spectral UNDER 385 Spectral H 6985 Spectral PLAST l 0.20 l 0.30 l 0.40 l 0.50 l 1.00 l 69 g 137 g 206 g 275 g 344 g 687 g 38 g 76 g 114 g 151 g 189 g 378 g 12 g 24 g 36 g 48 g 60 g 121 g 79

80 Spectral UNDER 395 SPRAY ANTI-CORROSION EPOXY PRIMER SPRAY PROPERTIES: Aerosol product Perfect for spot repairs to cover up bare metal areas Special anti-corrosion additives Smooth surface SUBSTRATES Old paint coatings, including thermoplastic paints Degrease, dry sand with P220 P360. Polyester putties Dry sand, use P240 P320 for final sanding. Epoxy primers Wait up to 12 hours before sanding, sand with P320 after 12 hours. Steel Degrease, dry sand with P120. Aluminium Degrease, dry sand with P280 P360 or mat with an abrasive needled cloth, degrease again. Galvanised steel Degrease, mat with an abrasive needled cloth, degrease again. Stainless steel Degrease. Wash primers Apply after drying. Polyester laminates Degrease, dry sand with P280. CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit* 840 g/l Actual VOC <650 g/l USAGE INSTRUCTION 2 min Shake the aerosol can for about 2 minutes before use to make the product uniform. 2 3 coats 10 15min/20 C Apply 2-3 coats to a fittingly prepared and degreased surface. The primer can be used "wet on wet". Curing time is minutes at 20 C. 5s CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty. SHELF LIFE Spectral UNDER years/20 C SAFETY See Safety Data Sheet. ADDITIONAL INFORMATION Spectral UNDER 395 is designed primarily for covering bare metal areas exposed during polishing the primer prior to applying the varnish. Due to its anti-corrosion properties it can also be used alone as a primer for spot repairs. 80

81 ADDITIVES Spectral SOFT TWO-COMPONENT MULTIFUNCTIONAL PUTTY PROPERTIES: Universal polyester putty Combines properties of a filling and finishing putty Very easy application Superb sanding Smooth surface RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Old paint coatings Degrease, dry sand P220 P280, degrease again. Polyester laminates Degrease, dry sand P80 P120, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again. Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: The filler should not be applied directly on reactive sealers (wash primers) or one-component acrylic and nitrocellulose products. MIXING RATIO Weight ratio Spectral SOFT 100 g Hardener 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit * 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener. It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 5 mm. 4 6 minutes/20 C DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. 81

82 DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp Approximately 5 min. SANDING Rough P80 P120 Finish P120 P240 COLOR Beige EQUIPMENT CLEANING NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral SOFT HARDENER 18 months/20 C SAFETY See Safety Data Sheet. 82

83 ADDITIVES Spectral SOFT LIGHT TWO-COMPONENT MULTIFUNCTIONAL PUTTY PROPERTIES: Universal polyester putty Combines properties of a filling and finishing putty The use of state-of-the-art fillers The color changes as polymerisation proceeds Very easy application Superb sanding Smooth surface RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Old paint coatings Degrease, dry sand P220 P280, degrease again. Polyester laminates Degrease, dry sand P80 P120, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again, apply EXTRA 715, treat surface, wipedry, and degrease (processing, see the EXTRA 715 Technical Data Sheet) Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: Do not apply the putty directly on wash primers or one-component acrylic and nitrocellulose products. The putty develops optimum adhesion to galvanised steel after approx. 1 h from application at 20 C. MIXING RATIO Weight ratio Spectral SOFT LIGHT 100 g HARDENER 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit * 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener.the putty color changes gradually from blue through grey to white It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 5 mm. 3 6 minutes/20 C 83

84 DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp Approximately 5 min. SANDING Rough P80 P120 Finish P120 P240 COLOR Blue in can. White after hardening EQUIPMENT CLEANING NC solvent, Thin 880,acetone STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral SOFT LIGHT 12 months/20 C HARDENER 18 months/20 C SAFETY See Safety Data Sheet. The Mixing Indicator provides a visual assessment of the precision of mixing the putty with the hardener and helps avoid incorrect component mixing ratios. The putty is blue. When mixed with the hardener, the color will gradually become lighter and turn white at the end of polymerization. 84

85 ADDITIVES Spectral GLAZE TWO COMPONENT MULTIFUNCTIONAL PUTTY PROPERTIES: Putty contains modern light nanofillers Product has smooth and self-levelling surface Pinnholes free The color changes as polymerisation proceeds Sanding without edge between putty and sheet metal Superb sanding RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Old paint coatings Degrease, dry sand P220 P280, degrease again. Polyester laminates Degrease, dry sand P80 P120, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again, apply EXTRA 715, treat surface, wipedry, and degrease (processing, see the EXTRA 715 Technical Data Sheet) Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: Do not apply the putty directly on wash primers or one-component acrylic and nitrocellulose products. The putty develops optimum adhesion to galvanised steel after approx. 1 h from application at 20 C. MIXING RATIO Weight ratio Spectral GLAZE 100 g HARDENER 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit * 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener. The putty color changes gradually from blue through grey to white It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 3 mm. 3 6 minutes/20 C 3 6 minute after mixing components patchy color of putty means inaccurate mixing components 85

86 DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp Approximately 5 min. SANDING Rough P120 P150 Finish P180 P240 COLOR Blue in can. White after hardening EQUIPMENT CLEANING NC solvent, Thin 880,acetone STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral GLAZE 12 months/20 C HARDENER 18 months/20 C SAFETY See Safety Data Sheet. The Mixing Indicator provides a visual assessment of the precision of mixing the putty with the hardener and helps avoid incorrect component mixing ratios. The putty is blue. When mixed with the hardener, the color will gradually become lighter and turn white at the end of polymerization. 86

87 ADDITIVES Spectral FINAL TWO-COMPONENT FINISHING POLYESTER PUTTY PROPERTIES: Fine fillers Very easy application Very smooth surface Soft treatment For repairing small defects RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Old paint coatings Degrease, dry sand P220 P280, degrease again. Polyester laminates Degrease, dry sand P80 P120, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again, apply EXTRA 715, treat surface, wipedry, and degrease (processing, see the EXTRA 715 Technical Data Sheet) Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: The filler should not be applied directly on reactive sealers (wash primers) or one-component acrylic and nitrocellulose products. MIXING RATIO Weight ratio Spectral FINAL 100 g HARDENER 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit * 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener. It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 5 mm. 4 6 minutes/20 C 87

88 DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp Approximately 5 min. SANDING Rough P180 P240 Finish P240 P320 COLOR White EQUIPMENT CLEANING NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral FINAL HARDENER 18 months/20 C SAFETY See Safety Data Sheet. 88

89 ADDITIVES Spectral FM TWO-COMPONENT POLYESTER GLASS FIBER PUTTY PROPERTIES: High mechanical resistance High elasticity Low volumetric shrinkage Easy treatment Perfect repair of large defects RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Old paint coatings Degrease, dry sand P220 P280, degrease again. Polyester laminates Degrease, dry sand P80 P120, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again, apply EXTRA 715, treat surface, wipedry, and degrease (processing, see the EXTRA 715 Technical Data Sheet) Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: The filler should not be applied directly on reactive sealers (wash primers) or one-component acrylic and nitrocellulose products. MIXING RATIO Weight ratio Spectral FM 100 g HARDENER 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit * 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener. It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 5 mm. 4 8 minutes/20 C 89

90 DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp Approximately 5 min. SANDING Rough P80 P120 COLOR Green EQUIPMENT CLEANING NC solvent STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral FM HARDENER SAFETY See Safety Data Sheet. 18 months/20 C 90

91 ADDITIVES Spectral FIBER LIGHT TWO-COMPONENT POLYESTER GLASS FIBER PUTTY PROPERTIES: Unique method of wetting the long glass fiber High elasticity Low volumetric shrinkage Easy treatment Perfect repair of large defects Very easy application Smooth surface after sanding Product contains mixing indicator RELATED PRODUCTS: Betox 50PC: Hardener SUBSTRATES Old paint coatings Degrease, dry sand P220 P280, degrease again. Polyester laminates Degrease, dry sand P80 P120, degrease again. Steel Degrease, dry sand P80 P120, degrease again. Galvanised steel Degrease, matt with an abrasive needled cloth, degrease again, apply EXTRA 715, treat surface, wipedry, and degrease (processing, see the EXTRA 715 Technical Data Sheet) Aluminium Degrease, matt with an abrasive needled cloth, degrease again. Two-component acrylic primers Degrease, dry sand P220 P280, degrease again. UNDER 385 From 30 minutes to 12 h at 20 C: without sanding Over 12 h: degrease, dry sand P220 P280, and degrease. Caution: The filler should not be applied directly on reactive sealers (wash primers) or one-component acrylic and nitrocellulose products. MIXING RATIO Weight ratio Spectral FIBER LIGHT 100 g HARDENER 2 3 g CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/b limit * 250 g/l Actual VOC content 90 g/l * For ready to apply mixture compliant with Directive UE 2004/42/CE APPLICATION CONDITIONS The putty should be applied at a temperature above +10 C. APPLICATION Clean and sand the surface. Degrease with Spectral EXTRA 785. Mix the components thoroughly until obtaining a uniform color. Observe the required amount of hardener.the putty color changes gradually from blue to light grey. Patchy color after hardening of putty means inaccurate mixing components It is advisable to use a putty dispenser in order to obtain the appropriate component ratio. Apply the putty. Maximum layer thickness: 5 mm. 3 6 minutes/20 C 91

92 DRYING TIMES 20 C 60 C minutes 10 minutes CAUTION: Drying times apply to the temperatures of the individual elements. DRYING WITH AN INFRARED RADIATOR Distance Follow the recommendations of the equipment manufacturer. Time depending on the type and power of the lamp Approximately 5 min. SANDING Rough P80 P120 COLOR Blue EQUIPMENT CLEANING NC solvent, acetone STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral FIBER LIGHT HARDENER SAFETY See Safety Data Sheet. 12 months/20 C 18 months/20 C The Mixing Indicator provides a visual assessment of the precision of mixing the putty with the hardener and helps avoid incorrect component mixing ratios. The putty is blue. When mixed with the hardener, the color will gradually become lighter and turn white at the end of polymerization. 92

93 ADDITIVES Spectral EXTRA 715 GALVANIZED STEEL & ALUMINIUM ADHESION INCREASING AGENT PROPERTIES: Improves adhesion to galvanized steel and aluminium Extremely effective Non-toxic Odourless Unique formula Environmentally safe USE Galvanized steel Hot dip zinc coated steel Aluminium VOC CONTENT VOC II/B/c limit 780 g/l Actual VOC 0 g/l PROCEDURE Degrease the surface with Spectral EXTRA 785 Apply EXTRA 715 on the surface and leave for 1 to 2 minutes Wipe the surface dry Wash the surface with Spectral EXTRA 785 or Apply the main product (e.g. a putty or an acrylic filler) Adhesion development time (from product application): 15 minutes for standard polyester putties 2 h for the polyester spray filler 1.5 h for Protect 380 Start processing after that time to sand/process shown on the product's TDS. STORAGE CONDITIONS Keep in dry rooms at above +10 C. Avoid direct exposure to sunlight. Reseal the container after use. SHELF LIFE Spectral EXTRA 715 SAFETY See the Safety Data Sheet. 12 months/20 C 93

94 Spectral EXTRA 895 SPRAY AEROSOL FADE OUT THINNER PROPERTIES: Aerosol product Very easy application For levelling of optical difference in color Non-irritating smell USE Colored acrylic topcoats Clearcoat CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit 840 g/l Actual VOC content <755 g/l USAGE INSTRUCTION Method 1 (recommended): 2 min apply the fade out thinner immediately after applying each coating of the clearcoat or topcoat. Apply a thin layer of the product until the spray dust coat has a uniform coating. Application of successive coatings can only be started when Spectral EXTRA 895 evaporates completely 1-2 coats Method 2: apply the fade out thinner immediately after applying the last coating of the clearcoat or topcoat. Apply a thin layer of the product until the spray dust forms a uniform coating. 5 s CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral EXTRA years/20 C SAFETY See the Safety Data Sheet. 94

95 ADDITIVES Spectral Prefill PROPERTIES: Semi-finished solvent-based aerosol product Allowing for individual filling of a can containing propellant, solvent and additives facilitating application with a selected varnish Allowing to match the color to standard shades without using a spray gun very easy application non-irritating smell USE Colored acrylic topcoats Clearcoat Not recommended for two-component products. CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/a limit 850 g/l Actual VOC content <720 g/l USAGE INSTRUCTION One-component semi-finished product with propellant and special additives. Spectral Prefill can be filled 2 min with solvent-based varnish (400 ml can ml varnish). 1-3 coats - Fill it with special machines for filling spray cans. - The product user is fully responsible for the final product. - Test the spray before use to check its color and properties. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the 5 s valve is empty. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral PREFILL 5 years/20 C SAFETY See Safety Data Sheet. 95

96 Spectral EXTRA W785 WATERBORNE DEGREASER PROPERTIES: Universal degreaser Removes fat and silicone Not aggressive, mild smell USE Old paint coatings Acrylic primers Plastics CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/e limit 200 g/l Actual VOC content 190 g/l USAGE INSTRUCTION The surface should be washed 2-3 times (in case atomizer max. 2 times). A clean piece of cloth should be used each time. One should wait until the remover evaporates completely before the application of the coat. STORAGE CONDITIONS Store in a dry room at a temperature higher than +10 C. Avoid direct exposure to sunlight. SHELF LIFE Spectral EXTRA W785 SAFETY See Safety Data Sheet. 96

97 ADDITIVES Spectral EXTRA 785 UNIVERSAL DEGREASER PROPERTIES: Universal degreaser Efficiently removes fat and silicone Not aggressive, mild smell Gentle smell USE Steel Aluminium Galvanised steel Stainless steel Old paint coatings Acrylic primers Polyester putties CONTENT OF VOLATILE ORGANIC COMPOUNDS VOC II/B/a limit 850 g/l Actual VOC content 780 g/l PROCEDURE The surface should be washed 2-3 times (in case atomizer max. 2 times). A clean piece of cloth should be used each time. One should wait until the remover evaporates completely before the application of the coat. STORAGE CONDITIONS Store in a dry and cool room, away from sources of fire and heat. Avoid direct exposure to sunlight. SHELF LIFE Spectral EXTRA 785 SAFETY See Safety Data Sheet. 97

98 Spectral SOLV 855 Acrylic thinner Standard, fast and slow. More: 21, 32, 36, 41, 46, 51, 56, 60, 68, 73 Spectral SOLV 885 Basecoat thinner Standard, fast and slow. More: 15 Spectral EXTRA 745 Filler Dye. More: 49, 58, 66, 71, 77 Spectral EXTRA 755 Acrylic filler accelerating agent. More: 49, 58, 66, 71 Spectral EXTRA 795 Fade out thinner. More: 13 Spectral EXTRA 895 Fade out Thinner. More: 19, 32, 37, 39, 42, 44 98

99 ADDITIVES COMPLEMENTARY PRODUCTS LAMPS FOR COLOR IDENTIFICATION With its special LEDs, the COLOR MATCH system is an innovative solution to facilitate painting, polishing and processing in preparation areas. MAGNETIC STOPWATCH A handy stopwatch with three setting buttons (max. time: 99 min 60 s). The back of the stopwatch features a magnet for attaching to any metal surface. Size: 5,3x7x0,7cm. PYROMETER A device for contactless measurement of temperature. Very precise and fast measurement. The pyrometer is a must-have piece of equipment for every body painter. The device allows assessing the temperature of coated surfaces, which minimises coat defects caused by insufficient temperature of coated details. Complete with a stylish metal gift box. SPONGE A durable and highly absorbable sponge. Perfect for washing car bodies with detergents. The sponge swells to its normal size when immersed in water. LABEL PRINTER A professional printer for quick and easy printing of labels directly from a PC. The quick printing mode allows printing a single label at any time. ADHESIVE CAN LABELS Adhesive labels for finished SPECTRAL products. Features blank spaces for color, car make, quantity, recommended primer color and all other necessary information for the user. Available in universal format and dedicated for Spectral BASE. Packed in 200 unit rolls. SCALES Electronic scales with a readout display and a maximum capacity of 5 kg. The appliance features a tempered glass deck, a battery level indicator and the TARE function to weigh materials in containers. The scales turn off automatically after 60 seconds of remaining idle. Dimensions: 19,5 x 15,8 x 4,0 cm. 99