FILTERS. COMPO CARE - Pressure filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES

Transcription

1 ILTERS HYDRAULI DIVISIO - Pressure filters TEHIAL DATA ORDERIG AD OPTIOS RT LOGGIG IDIATORS PRESSURE DROP ( p) URVES PRESSURE DROP ( p) URVES - MEDIA H+ ROSS UTIOAL VIE SPARE PARTS ORDERIG IORMATIO DIMESIOS O THE ILTER ELEMET

2 ILTERS HYDRAULI DIVISIO MATERIALS Head Bowl Bypass valve Seals ast iron Steel Steel BR itrile (KM - on request fluoroelastomer) ø 58 Indicator port ø ø Indicator housing Brass ø 8 ø 66 OMPATIBILITY H A/30 ull with fluids: HH- HL- HM- HR- HV- HG (according to ISO 6743/4). or fluids different than the above mentioned, please contact our Sales Dept. PRESSURE 9,5 Indicator port 0 ø , ø Max working 3 MPa (3 bar) Test 47 MPa (470 bar) Bursting 95 MPa (9 bar) ollapse, differential for the filter element : series standard MPa ( bar) series H+ Mpa (0 bar) BYPASS VALVE Setting 600 kpa (6 bar) +/-0% 94 9,5 55 ø 80 5 H 35 ø ORKIG TEMPERATURE rom -5 to +0 H eight Kg Indicator port ø ø ,4 ø 09 4, , ø ,6 H 7 8, ,0 3,9 7, ø ,0

3 ORDERIG AD OPTIOS RT P L ILTER OMETE AMILY SIZE & LEGTH ELEMET AMILY SIZE & LEGTH E P B PORT TYPE flanged 90 (manifold) PORT SIZE size size 30 size BYPASS VALVE without 600 kpa (6 bar) SEALS SEALS BR itrile KM luoroelastomer BR KM ILTER MEDIA ILTER MEDIA A fiber 3µ, >0, p bar A A A A A A A A A Afib. 3µ bar B fiber 6µ, >0, p bar B B B B B B B B B Bfib. 6µ bar fiber µ, >0, p bar fib. µ bar D fiber 5µ, >0, p bar D D D D D D D D D Dfib. 5µ bar fiber 3µ, >0, p 0 bar fib. 3µ 0 bar fiber 6µ, >0, p 0 bar fib. 6µ 0 bar H fiber µ, >0, p 0 bar H H H H H H H H H Hfib. µ 0 bar fiber 5µ, >0, p 0 bar fib. 5µ 0 bar cellulose 0µ, >, p bar cel. 0µ bar LOGGIG IDIATOR port, plugged diff. visual, 0 kpa (5 bar) diff. visual, 800 kpa (8 bar) diff., electrical, 0 kpa (5 bar) diff., electrical, 800 kpa (8 bar) diff.vis.electrical, 0 kpa (5 bar) diff.vis.electrical, 800 kpa (8 bar) ind. + thermostat 30 ind. + thermostat 30 X AESSORIES X no accessory available X X X X X X X X X LOGGIG IDIATORS O O A/ Series & series : differential visual indicator, set 0 kpa (5 bar) & 800 kpa (8 bar) +/-0% 40 Series & series : differential visual-electrical indicator, set 0 kpa (5 bar) & 800 kpa (8 bar) +/-0%. - onnector according to DI 436. Protection IP65 according to DI 400. SPDT:.A. 5- V >max resistive or inductive load A; V > max resistive load --0,5-0,A resp. > max inductive load --0,5-0,A resp. Series - & series -: differential electrical indicator, set 0 kpa (5 bar) & 800 kpa (8 bar) +/-0%. onnector according to DI 436. Protection IP65 according to DI 400 (thermostat 30 for -). SPDT:.A. 5- V >max resistive or inductive load A; V > max resistive load --0,5-0,A resp. > max inductive load --0,5-0,A resp.

4 PRESSURE DROPS ( p) URVES The Assembly Pressure Drop ( p) is obtained by adding the pressure drop values of the filter Housing and of the lean ilter Element corresponding to the ILTER HOUSIG PRESSURE DROP (mainly depending on the port size) considered low Rate and it must be lower than 80 kpa (0,8 bar). 0, , ,5 5 0, LEA ILTER ELEMET PRESSURE DROP (depending both on the internal diameter of the element and on the filter media) 0 B EPB D EPB B D EPB 3 B D B EPB D 0 EPB B 0 B EPB 3 D D EPB 34 D B 0 EPB 33 B D EPB B D BYPASS VALVE PRESSURE DROP hen selecting the filter size, these curves must be taken into account if it is foreseen that any flow peak is to be absorbed by the bypass valve, it also must be of proper configuration to avoid pressure peaks. The valve pressure drop is directly proportional to fluid specific gravity B. All the curves are obtained from test done at the UI HYDRAULI DIVISIO Laboratory, according to the specification ISO In case of discrepancy, please check the contamination level, viscosity and features of the fluid in use..b. All the curves have been obtained with mineral oil having a kinematic viscosity 30 cst and specific gravity 0,9; for fluids with different features, please consider the factors described in the first part of this catalogue.

5 PRESSURE DROPS ( p) URVES The Assembly Pressure Drop ( p) is obtained by adding the pressure drop values of the filter Housing and of the lean ilter Element corresponding to the considered low Rate and it must be lower than 80 kpa (0,8 bar). LEA ILTER ELEMET PRESSURE DROP (depending both on the internal diameter of the element and on the filter media) MEDIA H+ (recommended with no Bypass option) 0 EPB H 0 H EPB 0 EPB 3 H EPB H 0 EPB H 0 H EPB EPB H 0 EPB 33 H 0 EPB 34 H B. Poichè i diagrammi sono stati ottenuti sperimentalmente usando olio minerale con viscosità cinematica di 30 cst e peso specifico 0,9, se si utilizza un fluido con caratteristiche differenti vanno considerati i fattori di correzione indicati nella parte introduttiva del catalogo..b. Tutti i diagrammi soprariportati sono ricavati da prove effettuate presso il laboratorio della UI secondo la normativa ISO el caso si riscontrassero valori non conformi verificare il livello di contaminazione, viscosità e caratteristiche del fluido utilizzato.

6 ROSS UTIOAL VIE LOGGIG IDIATOR A visual or visual-electrical differential indicator is available as an option and allows monitoring of the element conditions, giving an exact indication of the right time to replace the element. OUT I EASY ASSEMBLIG The ETOP head allows for modular assembly that is compact and leak free. ILTER HOUSIG The head by high performance cast iron and the bowl by extruded steel ensure the best fatigue resistance to the working pressures. SEAL GUARATEED A perfect O-ring seal is always ensured as it is not dependent on the tightening torque applied to the bowl. ILTER ELEMET The filter element is manufactured with filter medias selected in the UI laboratory and mechanically supported to maintain the highest performances even at high differential pressures. SPARE PARTS ORDERIG IORMATIO (from the code of the complete filter, fill the digits corresponding to the boxes) ilter housing B P L XX Head S P L X X XXXXX Bowl S P L XXXX XXXXX Seal kit S P L X X X X X XXXXX DIMESIOS O THE ILTER ELEMET Type Ø B A B Media + EPB EPB EPB EPB 3,5 975 EPB 3, EPB3 78 4, EPB 78 4, EPB , Ø A EPB , Area (cm) Media H+ Media Technical data subject to variations without prior notice. - E - /05 UI HYDRAULI DIVISIO - AET ILTERS S.p.A. via S.hierico, Bolgare BG - Tel ax info@planetfilters.it -