8. A.Kobayashi and H.Suemasu : Heat Generation due to Crack Propagation in Composites,

Transcription

1 1., :,, 26, 291, , ,, :,, 27, 307, , , :,, 29, 324, , , : I.,, 29, 328, , , : II.,, 29, 328, , , :,, 30, 344, , (6'. H.Suemasu and S.Kobayashi : An Analytical Study of Nonlinear Response of Shear Buckled Rectangular Panels to Random Excitation, Computers and Structures, Vol.19, No.1,2, U.S.A., 1984, ) 7. A.Kobayashi, M.Munemura, N.Ohtani and H.Suemasu : On Estimation of Heat Evolution during Viscoelastic Crack Propagation by Liquid Crystal Film Technique, Journal of Applied Polymer Science, Vol.27, No.10, October 1982, A.Kobayashi and H.Suemasu : Heat Generation due to Crack Propagation in Composites,

2 Transaction of Japan Society for Composite Materials, Vol.8, No.1/2, Tokyo, December 1982, H.Suemasu : An Analytical Study of Probabilistic Aspect of Strength of Unidirectional Fiber Reinforced Composite under Tensile Loads, Transaction of Japan Society for Composite Materials, Vol.8, No.1/2, Tokyo, December 1982, ,, :,, 31, 350, , A. Kobayashi and H. Suemasu : Heat Evolution investigated by Liquid Crystal Film Technique during Fracture in Metals, Journal of Materials Science, Vol.18, London, 1983, H.Suemasu : Probabilistic Aspects of Strength of Unidirectional Fiber-Reinforced Composite with Matrix Failure, Journal of Materials Science, London, Vol.19, 1984, S.S.Wang, H.Suemasu and N.M.Zahlan : Interlaminar Fracture of Random Short-Fiber SMC Composite, Journal of Composite Materials, Vol.18, November 1984, S.S.Wang, N.M.Zahlan and H.Suemasu : Compressive Stability of Delaminated Random Short-Fiber Composites Part I-Modeling and Method of Analysis, Journal of Composite Materials, U.S.A., Vol.19, July, S.S.Wang, N.M.Zahlan and H.Suemasu : Compressive Stability of Delaminated Random Short-Fiber Composites Part II-Experimental and Analytical Results, Journal of Composite Materials, U.S.A., Vol.19, July 1985, S.S.Wang, E.S.M.Chim and H.Suemasu : Mechanics of Fatigue Damage and Degradation in Random Short-Fiber Composites, Part I-Damage Evolution and Accumulation, Transaction of ASME, Journal of Applied Mechanics, U.S.A., Vol.53, June 1986, S.S.Wang, E.S.M.Chim and H.Suemasu : Mechanics of Fatigue Damage and Degradation in Random Short-Fiber Composites,

3 Part II-Analysis of Anisotropic Property Degradation, Transaction of ASME, Journal of Applied Mechanics, Vol.53, U.S.A., June 1986, S.S.Wang, H.Suemasu and E.S.M.Chim : Analysis of Fatigue Damage Evolution and Associated Anisotropic Elastic Property Degradation in Random Short-Fiber Composite, Journal of Composite Materials, Vol.21, December 1987, ,, :,, 13, 5, 1987, , S.S.Wang :,, 14, 1, 1988, ,, :,, 15, 6, 1989, :, 618, , H.Suemasu : Compressive Behavior of Fiber Reinforced Composite Plates with a Center Delamination, Advanced Composite Materials, Vol.1, No.1, Netherlands, 1991, H.Suemasu : Analytical Study of Shear Buckling and Postbuckling Behaviors of Composite Plates with a Delamination, Japan Society of Mechanical Engineers, Vol.34, No.2, Tokyo, 1991, , :,, 40, 458, , ,, : CFRP,, 40, 466, , H.Suemasu :

4 Effects of Multiple Delaminations on Compressive Buckling Behaviors Composite Panels, Journal of Composite Materials, U.S.A., Vol.27, No.12, 1993, H.Suemasu : Postbuckling Behaviors of Composite Panels with Multiple Delaminations, Journal of Composite Materials, U.S.A., Vol.27, No.11, 1993, H.Suemasu, K.Friedrich and M.Hou : On Deformation of Woven Fabric Thermo Plastic Composites during Stamp- Forming Composite Manufacturing, U.K., Vol.5, No.1, 1994, H.Suemasu, S.Kerth and M.Maier : Indentation of Spherical Head Indentors on Transversely Isotropic Composite Plates, Journal of Composite Materials, U.S.A., Vol.28, No.17, 1994, H.Suemasu and M.Maier: An Analitical study of Impact Behavior of Axisymmetric Composite Plates, Advanced Composite Materials, Vol.5, No.1, Netherlands, 1995, H.Suemasu, K.Gozu, K.Hayashi and T.Ishikawa: Compressive Buckling of Rectangular Composite Plates with a Free-Edge Delamination, AIAA Journal, U.S.A., Vol.33, No.2, February 1995, ,, :,, 43, 500, , ,, :, 43, 500, , , :, 44, 505, , H.Suemasu M.Kawauchi, K.Gozu, K.Hayashi and T.Ishikawa: Effects of a Free Edge Delamination on Buckling of Rectangular Composite Plates with Two Fixed Loading and One Simply-Supported Side Edges Advanced Composite Materials, Netherlands, Vol.5, No.3, 1996,

5 38. H.Suemasu and O.Majima : Multiple Delaminations and Their Sevirity in Circular Axisymmetric Plates Subjected to Transverse Loadings Journal of Composite Materials, Vol.30, No.4, H.Suemasu and O.Majima : Multiple Delaminations and Their Sevirity in Nonlinear Circular Plates Subjected to Transverse Loadings Journal of Composite Materials, Vol.32, No.2, 1998, pp H.Suemasu : Compressive bucking behavior of laminates with interleavess of very low elastic modulus Advanced Composite Materials, Vol.7,No1,1998, pp H.Suemasu, T.Kumagai and K.Gozu : Compressive Behavior of Rectangular Composite Laminates with Multiple Circular Delaminations I. Experiment and Analytical Development AIAA Journal, Vol.36, No.7, pp , H.Suemasu and T.Kumagai : Compressive Behavior of Rectangular Composite Laminates with Multiple Circular Delaminations II. Finite Element Analysis AIAA Journal, Vol.36, No.7, pp , :, H.Suemasu : On an Experimental Method to Measure Mode III Interlaminar Fracture Toughness of Composite Laminates Composite Science and Technology, Vol.59, 1999, pp Hiroshi SUEMASU, Osamu MAJIMA and Yuichiro AOKI, Instability of Multiple Penny-Shape Delamination in Composite Laminates Subjected to Quasi-Static Transverse Loading, Journal of Reinforced Plastics and Composites, Vol.18, No.12, 1999, :, Vol.25, No.4, 1999, pp :

6 , Vol.26, No6, 2000, pp H.Suemasu, A.Kondo, K.Itatani, A.Nozue A Probabilistic Approach to the Toughening mechanism in Short-Fiber- Reinforced Ceramic-Matrix Composites, Composite Science and Technology, Vol.61, 2001, pp K. Itatani, K. Hattori, D. Harima, M. Aizawa, I. Okada, I. J. Davies, H. Suemasu and A. Nozue: Mechanical and thermal properties of silicon-carbide composites fabricated with short Tyranno Si-Zr-C-O fiber, Journal of Materials Science, 36(2001), K. Itatani, T. Tanaka, I. J. Davies, M. Aizawa, I. Okada, H. Suemasu and A. Nozue: Some properties of silicon carbide composites fabricated with chopped Si-Al-C fibers, International Journal of Materials and Product Technology, Vol. 16, 2001, S. Tanaka, K. Itatani, H. Uchida, M.Aizawa, I.J. Davies, H.Suemasu, A.Nozue, I.Okada, The effect of rare earth on the hot-pressing of magnesium silicon nitride, J. European Ceramic Society, 22, 2002, K. Itatani, F.Takahashi, M.Aizawa, I.Okada, I.J. Davies, H.Suemasu, A.Nozue, Densification and microstructual developments during the sintering of aluminum silicon carbide, J. Materials Science, 37, 2002, :, Vol.26, No.6, pp , 2003.

7 58. Y. Aoki, and H. Suemasu, Finite Element Study on Delamination Propagation in Composite Laminates Using Interface Element, Advanced Composite Materials, Vol.11, 2003, : pp : X-FEM, A A(2004), pp K. Itatani, T. Tanaka, H.Suemasu, A. Nozue, and I. J. Davies Fabrication and Fracture Behavior of Silicon Carbide Composites Containing Chopped Tyranno Si-Al-C Fiber, J. Austrasian Ceramic Society, 41, 2005, H. Hatta, M.S. Aly-Hassan, Y. Hatsukaze, S. Wakayama, H. Suemasu and N. Kasai, Damage detection of C/C composites using ESPI and SQUID techniques, Composite Science andd Technology, 65, 2005, H. Suemasu, K. Kurihara, O. Majima, K.Arai, and T. Ishikawa: Compressive Property Degradation of Composite Stiffened Panel Due to Debonding and Delaminations, Advanced Composite Materials, in press 64. H. Suemasu, H. Takahashi and T. Ishikawa On the failure mechanism of composite laminates with an open hole subjected to compressive load, Composite Science and Technology, in press , 2.4,, (pp ),,

8 , ( ), pp ,, ,,, , ( ),, a ,