KPA SMD LED The Hyper Red source color devices are made with InGaAIP on GaAs substrate Light Emitting Diode. Lens Type

Transcription

1 SMD LED The Hyper Red source color devices are made with InGaAIP on GaAs substrate Light Emitting Diode. FEATURES 2.1 mm X 0.6 mm Right Angle SMT LED, 1.0mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Various colors and lens types available Package: 2000pcs/ Reel Moisture sensitivity Level: Level 3 RoHS compliant SELECTION GUIDE Part No. Material λd (nm) Lens Type Iv Viewing Angle Min. Type. 2θ1/2 KPA-2106SURC InGaAIP 628 water clear KPA-2106SURCK InGaAIP 635 water clear KPA-2106SEC InGaAIP 601 water clear 70 0 KPA-2106SECK InGaAIP 601 water clear KPA-2106SYC InGaAIP 588 water clear KPA-2106SYCK InGaAIP 590 water clear 50 KPA-2106MGC InGaAIP 568 water clear KPA-2106CGCK InGaAIP 570 water clear KPA-2106ZGC AllnGaN 525 water clear KPA-2106VGC-A InGaN 525 water clear KPA-2106VGC-Z InGaN 535 water clear KPA-2106QBC-D AllnGaN 470 water clear KPA-2106PBC-A InGaN 470 water clear KPA-2106PBC-J InGaN 470 water clear 50 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous Flux: +/- 15% DIMENSION 2.1mm x 0.6mm x 1.0 mm (0802 Right Angle) KPA-2106

2 3.0x1.0mm SMD CHIP LED LAMPS Features 3.0mmx1.0mm SMT LED, 2.0mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. KPA-10 SERIES Package Dimensions Description The source color devices are made with Gallium Phosphide Red Light Emitting Diode. The source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The source color devices are made with Gallium Phosphide Green Light Emitting Diode. The source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Light Emitting Diode. The Super source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide P art No. D ic e K PA-10HD BRIGHT RED (GaP) K PA-10HC BRIGHT RED (GaP) K PA-10ID HIGH EFFICIENCY RED (GaAsP/GaP ) K PA-10EC HIGH EFFICIENCY RED (GaAsP/GaP ) K PA-10SGD SUPER BRIGHT GREEN (GaP) K PA-10SGC SUPER BRIGHT GREEN (GaP) K PA-10YD YELLOW (GaAsP/GaP ) K PA-10YC YELLOW (GaAsP/GaP ) K PA-10SRD-PRV SUPER BRIGHT RED (GaAlAs) K PA-10SRC-PRV SUPER BRIGHT RED (GaAlAs) Lens Typ e I Iv v 20 ma Viewin iewing Angle M in. T yp. 2θ1/ 2 RED DIFFUSE D RED DIFFUSE D GREEN DIFFUSES D YELLOW DIFFUSE D RED DIFFUSE D Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. KPA-10-1

3 Electrical / Optical Characteristics at T A =25 C S ymbol P aramete r D evic e T yp. M ax. U nit s Test Condition s λpeak Peak Wavelengt h Super nm IF=20m A λ1/ 2 Spectral Line Halfwidt h Super nm IF=20m A C Capacitanc e Super pf VF=0V;f=1MH z V F Forward Voltag e Super V IF=20m A I R Reverse Curren t All 10 ua VR = 5V Absolute Maximum Ratings at T A =25 C P arameter r Bright Re d Hig igh Efficiency Red Super Bright Green Yello ellow Super Bright Red Unit nits Power dissipation mw DC Forward Current ma Peak Forward Current [1] ma Reverse Voltage V Operating/Storage Temperature - 40 C To +85 C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. KPA-10-2

4 KPA-10HD,KPA-10HC KPA-10ID,KPA-10EC KPA-10-3

5 KPA-10SGD,KPA-10SGC KPA-10YD,KPA-10YC KPA-10-4

6 Super KPA-10SRD-PRV,KPA-10SRC-PRV KPA-10 SERIES SMT Reflow Soldering Instructions KPA-10-5

7 KPA-10 SERIES Recommended Soldering Pattern (Units : mm) KPA-10 SERIES Tape Specifications (Units : mm) KPA-10-6