Madison Chemical Co., Inc. Price List Effective Nov 1, 2017

Transcription

1 Madison Chemical Co., Inc. Price List 012FG-PL-55 ACETIC ACID, GLACIAL 99.5% PL-55 ACID PL-55 ACID CIP Liquid, non-foaming, acid detergent designed to penetrate and remove oxide, scale and a variety of complex soils typically found on dairy, beverage and food processing equipment PL-55 ACID CLEAN PS-OX Liquid blend of phosphoric acid and hydrogen peroxide designed to penetrate and remove oxide, scale, milkstone and other hybrid films of inorganic/organic materials from dairy and food processing equipment PL-55 ACID CLEANER BRIGHT Liquid acid detergent for removing soil, oxide and scale by simultaneously cleaning and brightening metal surfaces. Intended for use on aluminum, ferrous, stainless steel and copper alloys. Typically applied by lowpressure spray or immersion. May produce a mild etch on glass PL-55 ACID CLEANER CS Liquid, acidic formulation for the cleaning of aluminum, copper, ferrous and stainless steel alloys. Removes plasma smoke residue, weld marks, light oxide and discoloration PL-55 ACID CLEANER LF PL-55 ACID CLEANER S 7.60 Liquid blend of acids and surfactants to remove soil, oxide, scale and simulataneously brighten aluminum, mild steel, copper and stainless steel PL-55 ACID CLEANER SK 9.15 Liquid strong, acid detergent to remove soil, oxide and scale and brighten the surface on aluminum, but may also be used on ferrous, stainless steel and copper alloys. Specially suited for brightening of aluminum trailers and large equipment by low pressure spray or foam methods. May produce a mild etch on glass PL-55 ACID CLEANER S-NC PL-55 ACID CLEANER TC Liquid, non-foaming blend of acids and surfactants for removal of scale, milkstone, beerstone and similar deposits from stainless steel and most copper alloys PL-55 ACID CLEANER VB PL-55 ACID CLEANER W Liquid non-foaming, heavy-duty, acid detergent for C.I.P. and other applications. Designed to penetrate and remove oxide, scale and a variety of complex soils found on dairy, beverage and food processing equipment. Contains nitric acid and phosphoric acid PL-55 ACID N 9.25 Liquid, foaming blend of acid and surfactants designed to penetrate and remove films, oxides, hard water and mineral scale, milkstone, beerstone and similar dairy and food plant deposits. Page 1 of 60

2 VD-55 ACID N 9.25 Liquid, foaming blend of acid and surfactants designed to penetrate and remove films, oxides, hard water and mineral scale, milkstone, beerstone and similar dairy and food plant deposits PL-55 ACID NO Liquid, moderate foaming blend of phosphoric acid and surfactants to penetrate and remove oxides, hard water and mineral salts, milkstone and similar dairy and food plant deposits. May be applied by manual or immersion methods PL-55 ACID NO A liquid phosphoric acid detergent with low-to-medium foam PL-55 ACID NO. 3+ ND PL-55 ACID NO. 3A PL-55 ACID P A liquid, inorganic acid for neutralizing alkaline solutions or simply lowering the ph of solutions. ACID P is the product of choice for lowering the ph of iron phosphating solutions PL-55 ACIDFOAM A liquid foaming, acid cleaner to remove scale, rust, hard water, mineral salts and other similar similar deposits PL-55 ACIDFOAM SPECIAL II Liquid blend of surfactants and acids capable of removing oil and a wide variety of oxide and scale soil types. For manual and foam cleaning operations on mild steel, stainless steel, aluminum and copper alloys PL-55 ACIDFOAM SPECIAL V Liquid blend of surfactants and mild acids capable of removing light oil and a wide variety of oxide and scale soil types. For manual and foam cleaning operations on ferrous, stainless steel, aluminum and copper alloys. User-friendly, yet capable of robust cleaning! PL-55 ADDITIVE PL-55 ADDITIVE PL-55 ADDITIVE GAL A liquid, concentrated accelerator for zinc or iron phosphate conversion coating systems. Improves coating formation on aluminum, galvanized and galvaneal surfaces to provide superior paint adhesion PL-55 ADDITIVE GV Liquid, detergent booster to alkaline or acid cleaning solutions to provide enhanced removal of oil, grease and waxy soils PL-55 ADDITIVE GV PLUS A liquid additive for removing burned-on product that is safe on aluminum pans PL-55 ADDITIVE MP Liquid, detergent booster to alkaline or acid cleaning solutions to provide enhanced removal of oil, grease and waxy soils VC-5 ADDITIVE O 5 G Liquid, special oxidant formulation containing hydrogen peroxide. Intended to be used as an additive to alkaline boil-outs and cleaning processes to enhance removal of protein and other soils. Additive O is chlorine-free! Page 2 of 60

3 VD-55 ADDITIVE O Liquid, special oxidant formulation containing hydrogen peroxide. Intended to be used as an additive to alkaline boil-outs and cleaning processes to enhance removal of protein and other soils. Additive O is chlorine-free! PL-55 ADDITIVE SK PL-55 AEROFOAM CL Liquid concentrate used to produce a dense stable foam when used as an additive to detergent solutions. Effective with most acid, neutral and alkaline detergents PL-55 AEROFOAM D PL-55 AEROFOAM G Liquid concentrate used to produce a dense stable foam when used as an additive to detergent solutions. Effective with most acid, neutral and alkaline detergents PL-55 AGI-CLEAN A liquid, alkaline detergent for difficult cleaning operations involving removal of aged, oxidized, burned-on oil an grease. Intended for immersion application including agi-lift and ultrasonic equipment. Safe on ferrous, aluminum and zinc alloys when used as directed PL-55 AGI-CLEAN A liquid, alkaline detergent for difficult cleaning operations involving removal of aged, oxidized, burned-on oil an grease from chrome plated parts. Intended for immersion application (and agi-lift and ultrasonic). Safe for use on ferrous, aluminum and zinc alloys when used as directed B6-20 ALGAEOX 20 # 3.75 Powder, alkaline, oxidative material for mild cleaning of concrete and other hard surfaces. It is especially useful in removing algae and other organic discoloration on surfaces B6-50 ALGAEOX 50 # 2.22 Powder, alkaline, oxidative material for mild cleaning of concrete and other hard surfaces. It is especially useful in removing algae and other organic discoloration on surfaces FB-400 ALGAEOX 1.38 Powder, alkaline, oxidative material for mild cleaning of concrete and other hard surfaces. It is especially useful in removing algae and other organic discoloration on surfaces ZF-400 ALGAEOX 1.43 Powder, alkaline, oxidative material for mild cleaning of concrete and other hard surfaces. It is especially useful in removing algae and other organic discoloration on surfaces PL-55 ALK-BOOST 8.90 Liquid, chlorinated, alkaline, C.I.P. cleaner for food, beverage and dairy plants PL-55 ALLIGATOR DRY CHERRY PL-55 ALLIGATOR SKIN CW PL-55 ALUMA-SIGN R & R Liquid blend of surfactants and acids intended for use on aluminum, mild steel, stainless steel and copper to remove soil and scale buildup by simultaneously cleaning and brightening the surface through an etching action. Page 3 of 60

4 PL-55 ALUMINUM CONDITIONER Liquid, acidic concentrate designed so that cleaning, rust and oxide removal and prepaint preparation of aluminum occur simultaneously PL-55 AMBER KLEEN A liquid, alkaline, detergent concentrate that is solventized for effective removal of oil, grease, ink and many resins. Safe on stainless steel, ferrous, aluminum and zinc alloys when used as directed PL-55 AMBER KLEEN-M A liquid, alkaline, detergent concentrate that is solventized for effective removal of oil, grease, ink and many resins. Safe on stainless steel, ferrous, aluminum and zinc alloys, when used as directed PL-55 ANTIFOAM AF-H VC-55 ANTIFOAM 2000 (FG) Non-Silicone, Food Grade defoaming additive VC-55 ANTIFOAM 3000 (FG) Non-Silicone, Food Grade defoaming additive FB-450 ANTIFOAM PL-55 ANTIFOAM VD-53.5 ANTIFOAM G Liquid concentrated antifoam/defoamer designed to control foam in many aqueous systems. Very successful for defoaming protein soils, such as found in egg washing facilities PL-55 ANTIFOAM Liquid concentrated surfactant blend that provides superior process control for foam suppression and surface water removal. Very successful for defoaming protein soil VC-53.5 ANTIFOAM G Liquid concentrated surfactant blend that provides superior process control for foam suppression and surface water removal. Very successful for defoaming protein soil PL-55 ANTI-WELD SPATTER 7.55 A liquid, product used to inhibit the adhesion of weld spatter and weld berries PL-55 AQUA PL-55 AQUA Liquid, moderately, alkaline, general-purpose cleaner/degreaser. Safe on ferrous, aluminum, copper, stainless steel and zinc alloys, when used as directed PL-55 AQUA A liquid, mildly alkaline detergent, with ph= , for general-purpose cleaning and degreasing PL-55 AQUA A liquid, mildly, alkaline detergent for general-purpose cleaning and degreasing. At recommended use concentrations, the ph is not greater than PL-55 AQUA % 4.85 Page 4 of 60

5 017FG-PL-52 AQUA AMMONIA 52 G FG-VC-53 AQUA AMMONIA 53 G PL-55 AQUA BNP 9.25 A liquid concentrated, alkaline, general-purpose cleaner/degreaser that is safe on ferrous, aluminum and zinc alloys when used as directed. No phosphorus content! No SARA 313 reportables! Zero V.O.C. content! KT-1 AQUA BNP II KIT 5 G PL-55 AQUABLITZ Liquid, moderately alkaline detergent for heavy-duty floor and general purpose cleaning. Safe on ferrous, stainless and concrete surfaces, when used as directed PL-55 AQUABLUE 8.90 A liquid concentrated, alkaline, general-purpose cleaner/degreaser that is safe on ferrous, aluminum and zinc alloys when used as directed. Quickly removes difficult soils. Environmentally friendly! PL-55 AQUABLUE PL-5 AQUABLUE DG 9.15 A liquid concentrated, alkaline, general-purpose, foaming cleaner/degreaser that is safe on ferrous, aluminum and zinc alloys when used as directed PL-55 AQUABLUE DG 8.85 A liquid concentrated, alkaline, general-purpose, foaming cleaner/degreaser that is safe on ferrous, aluminum and zinc alloys when used as directed KT-1 AQUABLUE KIT 5 G PL-55 AQUABLUE KIT PART A PL-55 AQUABLUE KIT PART B PL-55 AQUABLUE MF A liquid concentrated, alkaline, general-purpose, foaming cleaner/degreaser that is safe on ferrous, aluminum and zinc alloys when used as directed. Quickly removes difficult soils! Foaming ability provides more contact time and a visual guide to complete coverage of the treated surface. Environmentally friendly! KT-1 AQUABLUE MF KIT 5 G PL-55 AQUABLUE VB Liquid, moderately, alkaline detergent for general-purpose cleaning of oil and grease. Does not contain SARA 313 reportables. Health hazard rating = PL-55 AQUACLEAN 9.20 Liquid alkaline, general-purpose detergent for medium-to-heavy-duty cleaning. No SARA 313 reportables. Safe to use on ferrous, aluminum, zinc, copper, tin and their alloys and most plastics, rubber and painted surfaces when used as directed KT-1 AQUACLEAN 50 KIT 5 G Page 5 of 60

6 PL-55 AQUACLEAN NC PL-55 AQUAGOLD II 5.80 A liquid concentrated, alkaline, general-purpose cleaner/degreaser that is safe on ferrous, aluminum and zinc alloys when used as directed. Environmentally friendly! PL-55 AQUARED II KT-1 AUTO CLEAN 2000 KIT 5 G FB-350 AWD 350 # 2.84 Powder, alkaline, laundry detergent for general and medium-duty laundry needs PL-55 BIOCOOL MEC Liquid, general purpose, synthetic machining fluid for use on ferrous metals. Use for grinding, cutting and light-duty machining PL-55 BIOLUBE CG PL-55 BIOLUBE GR # PL-55 BIOLUBE GR-V PL-55 BIORINSE PL-55 BIORINSE 87-SH A liquid, acidic composition for use as a final sealing rinse for conversion-coated metal surfaces. May be used on ferrous, aluminum and zinc alloys that have been conversion-coated. May be subsequently rinsed with deionized water as required in electrophoretic paint systems. 274FG-VC-53 BIOSIDE HS 15% 53 G A liquid peroxyacetic acid sanitizer at oz./10 gals.= ppm. Also for treatment of fruit and vegetable process water up to maximum 1.0 oz./16.4 gals.= 80ppm PL-55 BIOSTRIP # A liquid, 100%-active safety solvent designed to produce a highly effective, non-aqueous cleaning system for the removal of paints, coatings and inks.suitable for immersion, spray or wiping methods PL-55 BIOSTRIP B A liquid, 100% active, safety solvent blend that is a highly effective, non-aqueous cold cleaner for removing paints, coatings and inks. Use fullstrength and unheated by immersion, wiping, or spray methods PL-55 BIO-ZYME 6.10 Liquid blend of enzyme catalysts for use in grease trap and drain maintenance. Accelerates the degradation of oil, grease, fats, etc. to reduce cleaning frequency and pumpouts FB-500 BLACK PL-55 BLU-KOTE NR Page 6 of 60

7 PL-55 BOIL OUT CA 6.35 Liquid, non-foaming, heavy-duty, alkaline food plant detergent for in-place or recirculation cleaning PL-55 BOIL OUT HD 7.15 A liquid, alkaline boil out concentrate FB-500 BOIL OUT NC FB-500 BOIL OUT NC FB-450 BOIL OUT W 1.88 A powder, heavy-duty, alkaline cleaner especially beneficial to break-up and remove baked-on soils. Outstanding detergent for cookers, kettles, heat exchangers and deep fat fryers FB-500 BOIL OUT W 1.87 A powder, heavy-duty, alkaline cleaner especially beneficial to break-up and remove baked-on soils. Outstanding detergent for cookers, kettles, heat exchangers and deep fat fryers Z4-480 BOIL OUT W 480 # 1.97 A powder, heavy-duty, alkaline cleaner especially beneficial to break-up and remove baked-on soils. Outstanding detergent for cookers, kettles, heat exchangers and deep fat fryers Z5-450 BOIL OUT W 1.98 A powder, heavy-duty, alkaline cleaner especially beneficial to break-up and remove baked-on soils. Outstanding detergent for cookers, kettles, heat exchangers and deep fat fryers ZF-400 BOIL OUT W 2.00 A powder, heavy-duty, alkaline cleaner especially beneficial to break-up and remove baked-on soils. Outstanding detergent for cookers, kettles, heat exchangers and deep fat fryers PL-55 BREEZE Liquid, ph neutral, surfactant concentrate for manual dishwashing and general-purpose cleaning. It is exceptionally mild and easy on the hands FB-500 BUFF BRITE NAF# A powder acidic blend for cleaning, oxide removal and brightening of aluminum alloys. 296FG-VD-55 BURCO EHS FG-PL-55 BURCOSPERSE CL LIQUID PL-55 C.I.P A liquid phosphoric acid detergent for manual, immersion or CIP methods FB-400 C.I.P Powder, chlorinated, alkaline, C.I.P cleaner for food, beverage and dairy plants. OR Powder, chlorinated, alkaline cleaner for shell eggs Z5-400 C.I.P Powder, chlorinated, alkaline, C.I.P cleaner for food, beverage and dairy plants. OR Powder, chlorinated, alkaline cleaner for shell eggs ZA-405 C.I.P # 2.03 Powder, chlorinated, alkaline, C.I.P cleaner for food, beverage and dairy plants. OR Powder, chlorinated, alkaline cleaner for shell eggs. Page 7 of 60

8 ZF-400 C.I.P Powder, chlorinated, alkaline, C.I.P cleaner for food, beverage and dairy plants. OR Powder, chlorinated, alkaline cleaner for shell eggs PL-55 CALMAG SOLUTION A liquid blend of inorganic salts for use as a primary coagulant and emulsion breaker PL-55 CAT HEAVY DUTY 8.95 Aluminum Safe 522FG-VC-680 CAUSTIC SODA 50% FOOD GRADE 680 # PL-55 CAUSTIC SODA LIQUID (50%) 7.05 A 50% liquid solution of Sodium Hydroxide VD-55 CAUSTIC SODA LIQUID (50%) 7.05 A 50% liquid solution of Sodium Hydroxide PL-55 CHALLENGE Liquid, chlorinated, alkaline, C.I.P. cleaner for food, beverage and dairy plants PL-55 CHALLENGE EXTRA Liquid, chlorinated, alkaline C.I.P. cleaner for food, beverage and dairy plants PL-55 CHALLENGE LPH-CC 6.10 Liquid, mildly alkaline, chlorinated, C.I.P. cleaner for use where a mildly alkaline ph is needed PL-55 CHEL-ADD Liquid, alkaline concentrate for use as an additive to caustic and highly alkaline solutions for Boil-Out, CIP and other food plant operations. Activates and speeds removal of tough soils as well as improves rinsing PL-55 CHELEX Liquid solution of sodium dimethyldithiocarbamate that is effective in precipitating low concentrations of heavy metal ions from industrial wastewater. Acts as a polishing agent for wastewater containing mg/l of total metal ions PL-55 CHEM-MILL VB PL-50 CHLOR-CLEAN G 5.40 Liquid 12.5% sodium hypochlorite, non-foaming sanitizer and disinfectant. (2 oz. per 10 gallons water = 200ppm as available chlorine) FB-500 CHLORINATED CIP CLEANER 2.44 Powder, heavy-duty, chlorinated, alkaline in-place cleaner Z7-500 CHLORINATED CIP CLEANER 2.54 Powder, heavy-duty, chlorinated, alkaline in-place cleaner Z3-450 CHLORINATED CIP SPECIAL 2.15 Powder, heavy-duty, chlorinated, alkaline, in-place cleaner Z5-450 CHLORINATED CIP SPECIAL 2.15 Powder, heavy-duty, chlorinated, alkaline, in-place cleaner ZF-500 CHLORINATED CIP SPECIAL 2.13 Powder, heavy-duty, chlorinated, alkaline, in-place cleaner. Page 8 of 60

9 FB-400 CHLORO-DET PL-55 CHROME-BOND MAKEUP PL-55 CHROM-STRIP Liquid, strong, acidic, specialty blend designed to remove chromium plating from surfaces. It is very effective in the removal of chromium plating from copper-coated gravure cylinders PL-55 CIP BRITE A liquid non-foaming, heavy-duty, alkaline cleaner. Well-suited for CIP applications PL-55 CIP-300X 9.60 Liquid, concentrated, non-foaming acid for C.I.P. and other applications containing nitric and phosphoric acid. Designed to penetrate and remove oxide, scale and a variety of complex soils typically found on dairy, beverage and food processing equipment PL-55 CIP-N 8.30 A liquid heavy-duty acid, circulation cleaner containing nitric acid. Does not contain phosphorus. 036FG-FB-400 CITRIC ACID 2.32 Anhydrous citric acid in powder or crystalline form. 036FG-FB-450 CITRIC ACID 2.40 Anhydrous citric acid in powder or crystalline form. 036FG-FB-500 CITRIC ACID 2.30 Anhydrous citric acid in powder or crystalline form VD-55 CITRIC ACID FOOD GRADE FG-VD-55 CITRIC ACID LIQUID 50% FG Food grade, 50% active citric acid solution PL-55 CITRUS CLEAN A liquid highly solventized detergent to remove grease, oil and many inks, resins and glues. For use in inedible product processing areas, non-processing areas, and/or exterior areas FB-500 CLEAN CUT UF OH-500 CLEAN CUT UF PL-55 CLEANBOND 90 NMH A liquid cleaner-phosphate for recirculated spray washers and immersion tanks to pretreat ferrous metals at F. It combines excellent removal of oil and grease with outstanding cleaning for carbon, particulate soils and weld stains PL-55 CLEANER AB PL-55 CLEANER PL 9.80 Liquid, acidic cleaner for plastic surfaces. Suitable for use by immersion or recirculated spray methods PL-55 CLEAN-GARD Low foam cleaner and rust preventative for low soils and ambient use. Page 9 of 60

10 PL-55 CLEAN-GARD Liquid, cutting edge, alkaline detergent for difficult cleaning operations including the removal of aged, oxidized, burned-on oil and grease. May be used by immersion and ultrasonic application as well as recirculated spray washers up to 25 psi. Provides rust protection when not rinsed FB-400 CLEAN-GARD JE 2.06 A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed. Also has rust protection properties OH-400 CLEAN-GARD JE 2.17 A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed. Also has rust protection properties PL-55 CLEAN-GARD L PL-55 CLEAN-GARD M FB-315 CLEAN-GARD P # 2.14 A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed FB-400 CLEAN-GARD P A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed OH-400 CLEAN-GARD P A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed ZF-400 CLEAN-GARD P A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed FB-400 CLEAN-GARD P-3000 JE 1.74 A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed FB-500 CLEAN-GARD P-3000 JE 1.71 A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed OH-400 CLEAN-GARD P-3000 JE 1.75 A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed FB-400 CLEAN-GARD P A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed. Page 10 of 60

11 OH-400 CLEAN-GARD P A powder alkaline detergent specifically designed for single stage pressure cabinet washing of automotive and truck remanufactured parts such as engine blocks, transmissions, etc. Removes oil, grease and carbon deposits and is safe to use on steel, aluminum, copper and zinc alloys when used as directed PL-55 CLEAN-GARD PM-RP A liquid rust preventive for ferrous and copper alloys. Apply by immersion or spray at 1-10% to previously cleaned surfaces. No nitrites PL-55 CLEANZIT N FB-400 COLDTERGE AL 2.01 Aluminum Safe FB-500 COLDTERGE AL 1.97 Aluminum Safe FB-500 COLDTERGE ALH-S 1.83 Powder, alkaline cleaner to remove oil, grease, drawing compound and some burned-on deposits. May be used in immersion or recirculating spray equipment. Also finds use in cleaning and deburring mass finishing operations in barrels and vibratory units. Safe on ferrous, copper, aluminum, and zinc alloys, when used as directed FB-500 COLDTERGE AL-N 1.99 Powder, moderately, alkaline cleaner for use in barrel and vibratory mass finishing equipment as well as recirculating spray washers. Provides short-term rust protection when not rinsed, therefore is well-suited for single stage equipment where cleaning is required prior to assembly or other operations OH-500 COLDTERGE AL-N 2.00 Powder, moderately, alkaline cleaner for use in barrel and vibratory mass finishing equipment as well as recirculating spray washers. Provides short-term rust protection when not rinsed, therefore is well-suited for single stage equipment where cleaning is required prior to assembly or other operations PL-55 COMPOSITE TRETE Liquid, electrostatic treatment for use on non-conductive, composite materials prior to powder coating. Provides enhanced adhesion of cured, powder coatings to the substrate PL-55 COMPOUND 14 XC 9.15 A liquid, chlorinated, alkaline, general-purpose, foaming cleaner PL-55 COMPOUND 14 XP A liquid chlorinated, alkaline, foaming general-purpose cleaner PL-55 COMPOUND 14-F 8.45 A liquid, alkaline cleaner for use on a wide variety of soils encountered in food plants. It is outstanding in the fast removal of burned-on oil, grease, etc. Safe on stainless and ferrous alloys, when used as directed. Will etch or attack aluminum and zinc alloys PL-55 COMPOUND 14X Moderately alkaline product for the removal of oil, grease and burned on or oxidized particulate soils. Low foam properties make it especially useful in high pressure or high volume circulation cleaning applications TH-55 COMPOUND 14X Moderately alkaline product for the removal of oil, grease and burned on or oxidized particulate soils. Low foam properties make it especially useful in high pressure or high volume circulation cleaning applications FB-500 COMPOUND 15 GV 1.63 Powder alkaline cleaner for use in immersion tanks, barrel and vibratory mass finishing equipment and recirculating spray washers. Safe on ferrous, copper, aluminum, zinc and their alloys when used as directed. Page 11 of 60

12 PL-55 COMPOUND 50B PL-55 COMPOUND 50M 8.95 Liquid, alkaline, general-purpose cleaner/degreaser TH-55 COMPOUND 50M 9.00 Liquid, alkaline, general-purpose cleaner/degreaser PL-55 COMPOUND A-97P Liquid, solvent-based, water-displacing, non-emulsifiable rust preventive for long-term, indoor protection of ferrous and non-ferrous metals. Spot dry time = 7-10 minutes. Flash point = 103 F. Use fullstrength (100%) by immersion, brush or low pressure, non-atomizing spray TH-55 COMPOUND A-97P Liquid, solvent-based, water-displacing, non-emulsifiable rust preventive for long-term, indoor protection of ferrous and non-ferrous metals. Spot dry time = 7-10 minutes. Flash point = 103 F. Use fullstrength (100%) by immersion, brush or low pressure, non-atomizing spray PL-55 COMPOUND A-97P SUPER TH-55 COMPOUND A-97P SUPER PL-55 COMPOUND A-97P-HF Liquid, solvent-based, non-emulsifiable, water-displacing rust preventive for long-term, indoor protection of ferrous and non-ferrous metals. Spot dry time = minutes. Flash point = 160 F. minimum. Use fullstrength (100%) by immersion, brush or low pressure, non-atomizing spray TH-55 COMPOUND A-97P-HF Liquid, solvent-based, non-emulsifiable, water-displacing rust preventive for long-term, indoor protection of ferrous and non-ferrous metals. Spot dry time = minutes. Flash point = 160 F. minimum. Use fullstrength (100%) by immersion, brush or low pressure, non-atomizing spray TH-55 COMPOUND A-97P-HF (APEX) PL-55 COMPOUND AC PL-55 COMPOUND AC-35L 7.55 A liquid alkaline, low foam detergent. Safe on aluminum, zinc, stainless and other ferrous alloys when used as directed PL-55 COMPOUND AC-38L 7.85 Liquid, alkaline, recirculated spray detergent for removal of grease, oil and smut. Safe to use on aluminum, zinc, stainless and ferrous metals, when used as directed PL-55 COMPOUND AC Liquid acid cleaner for removal of scale, rust, hard water and mineral salts and similar deposits. Safe on stainless steel and most copper metals when used as directed. Controlled etch on aluminum and ferrrous alloys. Rapidly attacks magnesium PL-55 COMPOUND AC Liquid, acidic detergent for removal of oxides including laser cutting scale. No volatile acids. Safe on 300- series stainless steel, aluminum and copper alloys when used as directed. Slight etch may occur on ferrous and zinc alloys. Page 12 of 60

13 PL-55 COMPOUND AC-52 PLUS A liquid acidic detergent for removal of oxides including laser cutting scale. No volatile acids. Immersion = F. Recirculated Spray = F. Safe to use on 300 series stainless steel alloys when used as directed. Slight etch may occur on ferrous, aluminum, zinc and copper alloys PL-55 COMPOUND AC-52S 7.80 A liquid acidic detergent for removal of oxides including laser cutting scale. No volatile acids FB-500 COMPOUND AC OH-425 COMPOUND AC # OH-450 COMPOUND AC Aluminum Safe FB-450 COMPOUND AC-89K 2.07 Powder, alkaline detergent for immersion cleaning of aluminum, zinc, ferrous and copper alloys. Very useful for aluminum cleaning prior to etching, anodizing, conversion coating and other operations where silicates are not wanted PL-55 COMPOUND AC-95L Liquid, alkaline, detergent concentrate for use in recirculating spray washers or immersion tanks. Effective in removing typical metal-fabricating soils. Enhanced with FLOW-MAX FB-450 COMPOUND AD ZF-450 COMPOUND AD FB-500 COMPOUND AE A powder, alkaline, aluminum etchant. Minimizes scale buildup in the tank and on the heating coils PL-55 COMPOUND AF Liquid, dispersible, antifoam/defoamer to control foam in metalworking fluids and alkaline cleaning solutions. Does not impair subsequent finishing operations such as painting and plating PL-55 COMPOUND AF-A A liquid concentrated, silicone-based emulsion for controlling foam PL-55 COMPOUND AF-A (FG) Liquid, food grade, silicone-based emulsion for controlling foam in many aqueous systems PL-55 COMPOUND AF-H A liquid surface-type antifoam/defoamer. Apply as received to the points of greatest turbulence in the foaming system PL-55 COMPOUND AF-P Liquid, concentrated, silicone-based emulsion for controlling foam in most aqueous systems VD-55 COMPOUND AF-P Liquid, concentrated, silicone-based emulsion for controlling foam in most aqueous systems PL-55 COMPOUND AF-Z Liquid, dispersible, antifoam/defoamer that is a highly efficient tank-side product. Provides excellent results in metalworking aqueous systems and detergent and chemical processes containing high levels of foaming surfactants. Will not impair subsequent painting and plating. Page 13 of 60

14 PL-55 COMPOUND AP TH-55 COMPOUND AP PL-55 COMPOUND AP-B PL-55 COMPOUND ARS Liquid with ph = 7-8 for removal of rust and liqht soil from ferrous metals. Also deposits a self-protective conversion coating to aid in prevention of flash rust formation. Used in immersion tanks PL-55 COMPOUND AS PL-55 COMPOUND A-WT FB-400 COMPOUND BC Powder, mild, alkaline burnishing compound for use in vibratory or barrel equipment. May be used on stainless steel, ferrous, aluminum, zinc, copper and brass alloys, when used as directed OH-400 COMPOUND BC Powder, mild, alkaline burnishing compound for use in vibratory or barrel equipment. May be used on stainless steel, ferrous, aluminum, zinc, copper and brass alloys, when used as directed PL-55 COMPOUND BC-13L Liquid, mildl, alkaline burnishing compound for use in vibratory and barrel equipment. Used on ferrous, aluminum and zinc alloys, including die cast parts PL-55 COMPOUND BC-15LC 7.95 Liquid, mild, alkaline burnishing compound for use in vibratory and barrel equipment. May be used on ferrous, aluminum and zinc alloys, when used as directed PL-55 COMPOUND BC-15R Liquid, burnishing compound for use in vibratory and barrel equipment. Used on ferrous, aluminum zinc metals PL-55 COMPOUND BC Liquid, mildly alkaline burnishing compound for use in vibratory or barrel equipment. Used on ferrous, aluminum and zinc alloys to obtain a bright, high color, scratch-free surface FB-350 COMPOUND BC # FB-500 COMPOUND BC-89 PF PL-55 COMPOUND BC PL-55 COMPOUND BC-A 9.75 Liquid, mildly acidic burnishing compound to produce lustrous surfaces on many metals, especially aluminum diecast. Typically used with steel, stainless steel or ceramic media in vibratory or barrel mass finishing equipment PL-55 COMPOUND BC-A Page 14 of 60

15 PL-55 COMPOUND BC-BR 9.90 Liquid, outstanding, mild acid burnishing compound for use in vibratory or barrel equipment. May be used on stainless steel, ferrous, aluminum, zinc, copper and brass alloys. Decreased burnishing time compared to alkaline products PL-55 COMPOUND CI Aluminum protectant at F in resin cure process FB-350 COMPOUND CL # 3.00 Powder, high foaming, chlorinated, alkaline detergent for very effective removal of general soil, blood, oil and grease encountered in food, meat, and poultry plant operations. Intended for manual, non-recirculating spray and foam-type application Z3-351 COMPOUND CL # 3.10 Powder, high foaming, chlorinated, alkaline detergent for very effective removal of general soil, blood, oil and grease encountered in food, meat, and poultry plant operations. Intended for manual, non-recirculating spray and foam-type application PL-55 COMPOUND CR-120H PL-55 COMPOUND CR-120N 7.10 (FOOD) Liquid, non-foaming, nitric acid-based product for removal of oxides, oxalates and milkstone from dairy and food processing equipment. Excellent for passivation of stainless steel. (METAL) Liquid, nitricacid-based product for passivating stainless, desmutting of aluminum and removal of undesirable oxides and other particulate soils from stainless steel & aluminum alloys FB-475 COMPOUND D # 2.02 Non-Aluminum Safe FB-500 COMPOUND D Powder, heavy-duty, alkaline deruster for ferrous metals. Removes rust, scale, oil and grease. Will etch or attack aluminum and zinc metals. Use by immersion application including those for ultrasonic cleaning OH-500 COMPOUND D Powder, heavy-duty, alkaline deruster for ferrous metals. Removes rust, scale, oil and grease. Will etch or attack aluminum and zinc metals. Use by immersion application including those for ultrasonic cleaning PL-55 COMPOUND DBR PL-5 COMPOUND DC A liquid heavy-duty alkaline detergent for ferrous and copper alloys by recirculated spray or immersion methods. Outstanding removal of oil, grease and carbon PL-55 COMPOUND DC-N A liquid safety solvent degreaser. Flash point = 103 F TH-55 COMPOUND DC-N A liquid safety solvent degreaser. Flash point = 103 F PL-55 COMPOUND DX A liquid that is essentially ph neutral for removal of rust and inorganic soils from ferrous surfaces. Usesolutions are typically between ph of Use at F PL-55 COMPOUND DX A liquid, with essentially neutral ph, used to remove rust and inorganic soils from ferrous metals PL-55 COMPOUND DX Liquid for the removal of rust, smut and moderate soil from aluminum and zinc alloys to prepare the surface to accept a chromate conversion coating. Page 15 of 60

16 FB-500 COMPOUND EC-10B FB-500 COMPOUND EC-15B FB-500 COMPOUND EC PL-55 COMPOUND ET Liquid, heavy-duty, alkaline detergent for ferrous and most copper alloys by recirculated spray or immersion application. Effective on typical soil found in metal-fabricating plants. Removes tenacious soil such as oil, grease, smut and oxidized oil TH-55 COMPOUND ET Liquid, heavy-duty, alkaline detergent for ferrous and most copper alloys by recirculated spray or immersion application. Effective on typical soil found in metal-fabricating plants. Removes tenacious soil such as oil, grease, smut and oxidized oil PL-55 COMPOUND ET-S Non-Aluminum Safe PL-55 COMPOUND ET-SPECIAL Liquid, heavy-duty, alkaline cleaner for the removal of oil, grease and typical fabricating soils. Well suited for use as a recirculating, spray cleaner in the paint pretreatment process on ferrous, and most copper alloys PL-55 COMPOUND FB Liquid blend of acid stable surfactants for producing a foam blanket to suppress fumes from muriatic or sulfuric acid pickling operations PL-55 COMPOUND FR-220 HF A liquid alkaline, organic, non-chrome final sealing rinse. Promotes adhesion between the paint and conversion coating and provides temporary rust protection while the part is wet PL-55 COMPOUND FR Liquid alkaline, organic, final sealing rinse for conversion-coated surfaces. Promotes adhesion between the paint and the conversion coating. Provides excellent corrosion resistance for the painted surface in salt spray and humidity testing PL-55 COMPOUND FR Liquid alkaline, organic, final sealing rinse for conversion-coated surfaces. Promotes adhesion between the paint and the conversion coating. Provides excellent corrosion resistance for the painted surface in salt spray and humidity testing PL-55 COMPOUND FR-A Liquid, acidic, final sealing rinse for conversion coated metal surfaces FB-450 COMPOUND FT Powder containing quaternary ingredients for use as a floor treatment to aid in prevention of slippery floors. May also be used as a general purpose, floor and wall detergent FB-500 COMPOUND FT Powder containing quaternary ingredients for use as a floor treatment to aid in prevention of slippery floors. May also be used as a general purpose, floor and wall detergent FB-500 COMPOUND FT-103-NP 1.57 Powder containing quaternary ingredients for use as a floor treatment to aid in prevention of slippery floors. May also be used as a general purpose, floor and wall detergent. It does not contain phosphorus-based ingredients. Page 16 of 60

17 LB-5 COMPOUND FT-103-NP 5 # Powder containing quaternary ingredients for use as a floor treatment to aid in prevention of slippery floors. May also be used as a general purpose, floor and wall detergent. It does not contain phosphorus-based ingredients PL-55 COMPOUND GP Liquid, alkaline, general purpose cleaner/degreaser with excellent solvency for removing oil, grease, tire marks and other heavy deposits from floors, walls and equipment. Safe for use on stainless and ferrous alloys, when used as directed FB-500 COMPOUND HT Non-Aluminum Safe FB-450 COMPOUND HT-50 (OMAHA) 1.75 A powder alkaline, ferrous metal cleaner for use in immersion tanks. Product of choice in hot dip galvanizing for alkaline soak cleaning prior to acid pickling. Safe on ferrous alloys when used as directed. Will etch and attack aluminum and zinc alloys FB-500 COMPOUND HT-50 (OMAHA) 1.74 A powder alkaline, ferrous metal cleaner for use in immersion tanks. Product of choice in hot dip galvanizing for alkaline soak cleaning prior to acid pickling. Safe on ferrous alloys when used as directed. Will etch and attack aluminum and zinc alloys OH-450 COMPOUND HT-50 (OMAHA) 1.76 A powder alkaline, ferrous metal cleaner for use in immersion tanks. Product of choice in hot dip galvanizing for alkaline soak cleaning prior to acid pickling. Safe on ferrous alloys when used as directed. Will etch and attack aluminum and zinc alloys ZF-450 COMPOUND HT-50 (OMAHA) 1.85 A powder alkaline, ferrous metal cleaner for use in immersion tanks. Product of choice in hot dip galvanizing for alkaline soak cleaning prior to acid pickling. Safe on ferrous alloys when used as directed. Will etch and attack aluminum and zinc alloys FB-500 COMPOUND HT-50 BOIL OUT 1.92 Powder, heavy-duty, alkaline detergent for removal of heavy, baked-on soils. Outstanding cleaner for cookers, kettles and heat exchangers ZF-480 COMPOUND HT-50 BOIL OUT 480 # 2.02 Powder, heavy-duty, alkaline detergent for removal of heavy, baked-on soils. Outstanding cleaner for cookers, kettles and heat exchangers FB-400 COMPOUND HT Non-Aluminum Safe ZF-360 COMPOUND HT # 2.81 Non-Aluminum Safe ZF-440 COMPOUND HT # 2.78 Non-Aluminum Safe FB-450 COMPOUND HT A powder heavy-duty, alkaline, ferrous metal cleaner for use in immersion tanks. Product of choice in hot dip galvanizing for alkaline soak cleaning prior to acid pickling. Safe on ferrous alloys when used as directed. Will etch and attack aluminum and zinc alloys PL-55 COMPOUND IDC Liquid, iodophor sanitizer containing phosphoric acid. (1oz. per 5 gallons of water = 25ppm titratable iodine) Page 17 of 60

18 PL-55 COMPOUND JFC 7.25 Liquid, alkaline detergent for general-purpose cleaning. May be used in floor scrubbers or by manual, immersion and non-recirculating spray application. No SARA 313 reportables. Zero V.O.C. content. Health hazard rating = PL-55 COMPOUND JH Moderately alkaline spray cleaner; safe on ferrous, aluminum and zinc alloys while being effective on many soils FB-400 COMPOUND L Powder, high foaming, chlorinated, alkaline detergent for very effective removal of general soil, blood, oil and grease encountered in food, meat and poultry plant operations. Intended for manual, non-recirculated spray or foam-type application PL-55 COMPOUND LAC PL-55 COMPOUND LCP A liquid cleaner-phosphatizing agent for use in recirculated spray washers to pretreat ferrous, cast-iron, aluminum and zinc alloys at F PL-55 COMPOUND LCP-58-NDA Liquid iron phosphatizing agent for use in immersion tanks or recirculated spray washers with five stages or more. Forms an iron phosphate conversion coating on precleaned ferrous metals PL-55 COMPOUND LCP A liquid cleaner-phosphatizing agent for recirculated spray washers & immersion tanks to pretreat ferrous and cast-iron alloys at F PL-55 COMPOUND LCP-60 EXTRA A liquid acidic cleaner-phosphatizing agent for use on ferrous alloys. Recirculated spray use at F PL-55 COMPOUND LCP-60-NDA A liquid iron phosphate for recirculated spray washers & immersion tanks to pretreat ferrous alloys at F PL-55 COMPOUND LCP A liquid cleaner-phosphate for recirculated spray washers & immersion tanks to pretreat ferrous, aluminum and zinc alloys at F PL-55 COMPOUND LCP A liquid cleaner-phosphate for recirculated spray washers & immersion tanks to pretreat ferrous alloys at F PL-55 COMPOUND LD Liquid, inhibited, acid blend for the removal of hard water deposits, scale, metal oxides, milkstone, beerstone, protein and many other stains. Specially inhibited to be less corrosive than mineral acids on most materials of construction PL-55 COMPOUND LD-5 ND 8.20 Liquid, inhibited, acid blend for the removal of hard water deposits, scale, metal oxides, milkstone, beerstone, protein and many other stains. Specially inhibited to be less corrosive than mineral acids on most materials of construction FB-400 COMPOUND LF Aluminum Safe FB-500 COMPOUND LF Aluminum Safe Page 18 of 60

19 FB-500 COMPOUND LF-33 EXTRA 2.14 Aluminum Safe PL-55 COMPOUND LIM A liquid highly solventized detergent to remove grease, oil and many inks, resins and glues. For use in inedible product processing areas, non-processing areas, and/or exterior areas PL-55 COMPOUND LIM PL-55 COMPOUND LIM A liquid solvent blend specially formulated for removal of adhesive, glue, labels, grease and oil from machinery and equipment. Apply fullstrength and unheated by immersion, manual non-atomizing spray or wiping methods PL-55 COMPOUND LIP-10LC PL-55 COMPOUND LIP A liquid cleaner/iron phosphate concentrate PL-55 COMPOUND LIP-2A PL-55 COMPOUND LIP-2F PL-55 COMPOUND LIP-4A A liquid cleaner/iron phosphate concentrate with extra ability to remove carbonaceous soils PL-55 COMPOUND LIP-4B PL-55 COMPOUND LIP Liquid, acidic, cleaner-phosphate, conversion coating product for use by immersion or recirculated spray methods. Recommended for use on ferrous, aluminum and zinc alloys PL-55 COMPOUND LIP PL-55 COMPOUND LT Liquid rust preventive for short-term rust protection applications and for use in leak testing equipment. Typical concentrations are % by volume in water PL-55 COMPOUND LT-AL PL-55 COMPOUND LT-CC PL-55 COMPOUND LT-CU Mildly alkaline rp and copper/brass corrosion protectant designed for use in leak testing FB-500 COMPOUND M-14H FB-450 COMPOUND M-15C 1.58 Page 19 of 60

20 FB-500 COMPOUND M-19PF 2.18 Conversion coat for passivation in a mass finishing operation PL-55 COMPOUND MCB Liquid non-volatile, polymeric microbicide to control growth of algae, bacteria and fungi in recirculating cooling water systems PL-52 COMPOUND MCB-3 52 G Liquid microbicide for the control of bacteria, algae and fungi in industrial, recirculating, water cooling towers and recirculating, closed loop, water cooling systems PL-55 COMPOUND MCB Liquid microbicide for the control of bacteria, algae and fungi in industrial, recirculating, water cooling towers and recirculating, closed loop, water cooling systems PL-55 COMPOUND MP Powder formulated to serve as a pre-dip conditioning agent for COMPOUND MP-125 manganese phosphate systems. Promotes formation of a dense and fine crystal structure PL-55 COMPOUND MP Liquid, acidic product for immersion use to change a precleaned steel surface to a manganese phosphate conversion coating PL-55 COMPOUND MSP A liquid, alkaline solution of chelating agents used to remove and prevent buildup of metal ions such as mineral deposits. It has many uses in processing and manufacturing operations in food plants as well as metal finishing and pulp and paper. Does not contain phosphorus PL-55 COMPOUND OS Liquid, emulsion breaker used to split-out petroleum oil. Also used for splitting-out of oil from alkaline cleaner and iron phosphate baths PL-55 COMPOUND PC A liquid blend of surfactants and inhibitors for use in pickling baths composed of hydrochloric, sulfuric or phosphoric acids. Exhibits substantivity to copper, brass, aluminum, zinc and stainless alloys to provide acid inhibition and promote uniform acid attack on surface oxides and scale. Use at 0.5-2% by volume of the gallons of acid present in the pickling solution PL-55 COMPOUND PS-2 LF 9.90 A liquid low-to-moderate, foaming, acid cleaner containing nitric and phosphoric acids FB-500 COMPOUND PT 1001-TH 2.03 Non-Aluminum Safe ZF-400 COMPOUND PT 1001-TH 2.14 Non-Aluminum Safe ZF-440 COMPOUND PT 1001-TH 440 # 2.13 Non-Aluminum Safe ZF-500 COMPOUND PT 1001-TH 2.11 Non-Aluminum Safe PL-55 COMPOUND PT PL-55 COMPOUND RP Liquid, non-nitrite, water-based rust preventive for ferrous and copper alloys. Leaves a nearly invisible, dryto-the-touch film for short-term indoor storage protection up to four weeks, or longer at high end of concentration range. Page 20 of 60

21 PL-55 COMPOUND RP-111 NC PL-55 COMPOUND RP-111-HT Liquid, non-nitrite, water-based rust preventive for ferrous and copper alloys. Leaves a nearly invisible, dryto-the-touch film for short-term indoor storage protection up to four weeks, or longer at high end of concentration range PL-55 COMPOUND RP-111-M A liquid, non-nitrite, waterbased rust preventive for ferrous and copper alloys. Typical use-conditions are 1-15% by volume at F PL-55 COMPOUND RP-111-MT 8.50 Liquid, waterbased, non-nitrite rust preventive for use on ferrous and copper metals. Typical use conditions are 3-30% by volume in water at temperatures ranging from F PL-55 COMPOUND RP PL-55 COMPOUND RP-123 PLUS Liquid, waterbased, non-nitrite rust preventive for ferrous metals that is specially designed for hard water conditions. Use at 1-15% by volume in water at temperatures from F PL-55 COMPOUND RP-12F PL-55 COMPOUND RP Liquid non-nitrite, waterbased rust preventive for use on ferrous alloys. Leaves a nearly invisible, dry-to-thetouch film for short-term indoor storage protection up to four weeks, or longer at high end of concentration range PL-55 COMPOUND RP Liquid, non-nitrite water-based rust preventive for ferrous and copper alloys. Leaves a nearly invisible, dryto-the-touch film for short-term indoor storage protection up to four weeks, or longer at high end of concentration range PL-55 COMPOUND RP-15 BLUE PL-55 COMPOUND RP Liquid, solvent-based, non-emulsifiable, water-displacing rust preventive for long-term, indoor protection of ferrous and non-ferrous metals. Spot dry time = minutes. Flash Point = 160 F. minimum. Use fullstrength (100%) by immersion, brush or low pressure, non-atomizing spray PL-55 COMPOUND RP PL-55 COMPOUND RP PL-55 COMPOUND RP Liquid, solvent-based, non-emulsifiable, water-displacing rust preventive for long-term indoor protection of ferrous and non-ferrous metals. Flash point = 160 F. minimum. Spot dry time = minutes. Use fullstrength (100%) PL-55 COMPOUND RP-80 PLUS Liquid, solvent-based, water-displacing rust preventive for long-term, indoor protection of ferrous and nonferrous metals. Spot dry time = 9-12 minutes. Flash point = 103 F. Use fullstrength (100%) for most applications. Page 21 of 60