SteelSeal - Presentation

Transcription

1 SteelSeal - Presentation Akzo Nobel Industrial Coatings Wood Coatings Europe Unit 04A, Mercer Way Shadsworth Business Park Blackburn Lancashire BB1 2QZ Ian Crawford 0

2 Ian Crawford, SteelSeal - Tech / Sales

3 What is SteelSeal Premium Cladding Painting System Proven Track Record 10 year life expectancy Product Warranty available 2

4 What surfaces can it be used on Plastisol i.e. HP200 / HPS200 Pvf 2 (PVDF) Polyester Silicone Polyester Polyurethanes Powder Coated Cladding Panels 3

5 Reasons for using SteelSeal Suit corporate colour style or change in marketing strategy To suit change of ownership To suit change in planning policy To ensure environmental colour compatibility To create a cheerful working environment To restore the existing colour scheme As part of a planned maintenance or dilapidation scheme. 4

6 SteelSeal Products SteelSeal Primer 4VC Series SteelSeal Topcoat 5VF Series SteelSeal Undercoat 5AS Series SteelSeal Etch Primer 7NN109 Associated Solvents 5

7 SteelSeal Primer 4VC Series Moisture Cured Urethane Resin One Primer covers all named coil surfaces Colours Light Grey(100), Dark Grey(120) & Off White (001) Typical Volume Solids 44 % DFT of µms 8½m 2 /litre 5 litre packs 6

8 SteelSeal Topcoat 5VF Series Silicone / Urethane air drying resin Colours Base system allowing a myriad of colours to be tinted including B.S., RAL or NCS colour palettes Typical Volume Solids 50 % DFT of µms 10m 2 /litre Packs in the main 10 litre pales but Goosewing Grey (10A05) in 5 Litres 7

9 Other Products Include SteelSeal Undercoat 5AS Series Urethane / Alkyd air drying resin Used for previously painted i.e. SteelSeal type Colours Base system (901 & 903) allowing colour matching but typical undercoat colours Typical Volume Solids 52 % DFT of 40 µms 13m 2 /litre 4½Litre packs 8

10 Other Products Include SteelSeal One Pack Etch Primer 7NN109 PVB Resin Used for patch priming aluminium substrates Colours Grey Typical Volume Solids 18 % DFT of µms 10-13m 2 / L@ 15 microns 5Litre packs 9

11 Solvents 3CG000 SteelSeal Topcoat (5VF) & Undercoat (5AS ) 4DT001 SteelSeal Primer (4VC) 7QT182 One Pack Etch Primer (7NN109) 10

12 SteelSeal has been specifically formulated for coil coated cladding Features Corus Approved Single Pack Multi Application Topcoat Base System Primer(4VC) = M.C.U. VOC Compliant 10 year life Product Warranty Benefits Industry recognition Easy to Use Brush, Roller & Airless Spray Extensive Colour Range Low temp cure; wider painting window Reduced Emissions Customer confidence Customer / Client confidence 11

13 Typical Specification Patch Prime with SteelSeal Primer 4VC Series, DFT 50-60µms 1 st Coat SteelSeal Primer 4VC Series, DFT 50-60µms 2 nd Coat SteelSeal Topcoat 5VF Series, DFT 50-60µms 3 rd Coat As second coat as necessary 12

14 Model Specifications New Plastisol Firmly Adhering / Weathered Plastisol Poorly adhering / Peeling Plastisol Pvf 2 (PVDF), Polyurethane, Polyester Previously Painted cladding. 13

15 Typical Specification example = Firmly adhering SteelSeal Repaint System for Firmly Adhering, Weathered Plastisol Standard Specification No. 5 PREPARATION Areas of mould or algae growth must be treated with a proprietary fungicidal solution (used in accordance with the manufacturer s instructions). This must be done prior to washing down of surfaces and may require repeat application to effectively sterilise the surface. Thoroughly wash down; using pressure water jetting methods, incorporating a suitable detergent solution so as to remove all dirt, chalk deposits, oil, grease, residues from sterilisation and any other deleterious matter. Fresh water rinse and allow to dry. The most common areas of corrosion occur at sheet ends/sides, overlaps or, as a result of mechanical damage. Thoroughly remove all corrosion by mechanical abrasive tools to achieve bright metal substrate feathering back adjacent sound Plastisol. Any white zinc salts must also be removed by dry abrading using nylon scouring pads or similar. Remove any lift & curl Plastisol at the bottom of the sheets where necessary, by mechanical means, and feather the edges back to a sound basis. Remove all debris and ensure all surfaces are clean, dry and free from oil, grease or other deleterious matter before painting commences. PAINTING Patch Prime: To prepare bare steel areas apply: SteelSeal primer, PC4VC Series, DFT ms Apply Overall 1 st Coat: SteelSeal Primer, PC4VC Series, DFT ms. 2 nd Coat: SteelSeal Topcoat, PC5VF Series, DFT ms *3 rd Coat: SteelSeal Topcoat, PC5VF Series, DFT ms * The second application of the topcoat will depend on the method of application, surface profile detail and the colour choice 14

16 Pictorial Case Studies Before & Afters

17 Charlestown Industrial Estate - Tameside Existing cladding Plastisol coated in Vandyke Brown Side sheets good to overcoat 16

18 Charlestown Industrial Estate - Tameside SteelSeal Topcoat Goosewing Grey 10A05 & Blue RAL

19 Charlestown Industrial Estate - Tameside The roofs were in a poor condition, extensive peeling, exposing the bare Galvanising. 18

20 Charlestown Industrial Estate - Tameside SteelSeal Topcoat Goosewing Grey 10A05 & 19

21 Charlestown Industrial Estate - Tameside Before 20

22 Charlestown Industrial Estate - Tameside After 21

23 Charlestown Industrial Estate - Tameside After 22

24 Dodwells Industrial Estate

25 Dodwell Industrial Estate Existing condition, Plastisol, weathered but firmly adhering 24

26 Dodwell Industrial Estate After 25

27 Dodwell Industrial Estate Before: 26

28 Dodwell Industrial Estate After 27

29 Dodwell Industrial Estate Before 28

30 Dodwell Industrial Estate After 29

31 Dodwell Industrial Estate Before 30

32 Dodwell Industrial Estate After 31

33 Dodwell Industrial Estate Before 32

34 Dodwell Industrial Estate After 33

35 Distribution Warehouse - Warrington

36 Distribution Warehouse Warrington Existing = Plastisol, firmly adhering but faded. 35

37 Distribution Warehouse Warrington Primer 4VC100 36

38 Distribution Warehouse Warrington During application of the topcoat 37

39 Distribution Warehouse Warrington Topcoated 38

40 Distribution Warehouse Warrington 39

41 Distribution Centre (DHL) Stakehill Ind Est

42 Former DHL Distribution Centre Existing = Pvf2, dirty, mould contaminated, Corrosion to some Sheets. 41

43 Former DHL Distribution Centre Colours used; 42

44 Former DHL Distribution Centre Before 43

45 Former DHL Distribution Centre After 44

46 Former DHL Distribution Centre Before 45

47 Former DHL Distribution Centre After 46

48 Former DHL Distribution Centre Before 47

49 Former DHL Distribution Centre After 48

50 Former DHL Distribution Centre 49

51 SteelSeal Akzo Nobel Industrial Coatings Wood Coatings Europe Unit 04A, Mercer Way Shadsworth Business Park Blackburn Lancashire BB1 2QZ Ian Crawford 50