TECHNICAL SPRAYS MAINTENANCE FOR GENERAL INDUSTRY, AND AUTOMOTIVE INDUSTRY AND CONSTRUCTION PROFESSIONAL USE

Size: px
Start display at page:

Download "TECHNICAL SPRAYS MAINTENANCE FOR GENERAL INDUSTRY, AND AUTOMOTIVE INDUSTRY AND CONSTRUCTION PROFESSIONAL USE"

Transcription

1 TECHNICAL SPRAYS MAINTENANCE FOR GENERAL INDUSTRY, AND AUTOMOTIVE INDUSTRY AND CONSTRUCTION PROFESSIONAL USE

2 TECHNICAL SPRAYS MAINTENANCE FOR GENERAL INDUSTRY, AND AUTOMOTIVE INDUSTRY AND CONSTRUCTION RANGE ANTI-CORROSION COATINGS S OILS SPECIFIC ANTI-CORROSION COATINGS GALVA FLASH Ref: More than hours resistance to salt spray test according ASTM B-117 Extremely effective anticorrosion agent Good resistance to UV rays and temperature (up to +350º'bcC) High surface covering capacity Exceptional shine. Mirror effect. GALVA MATE Ref: More than hours resistance to salt spray test according ASTM B-117 High purity zinc particles (99%) Double protection: physical and galvanic Good resistance to temperature (up to +350º'bcC) It retouches and protects welds High surface covering capacity Fast drying (12 minutes at 25º'bcC) Matt finish GALVA INOX Ref: More than hours resistance to salt spray test according ASTM B-117 Extremely effective anticorrosion agent Good resistance to temperature (up to +350º'bcC) Special to retouch and to protect the welds in aluminium and stainless steel parts Good resistance to temperature (up to +350º'bcC) Perfect finish (no necessity of painting or after treatment) ANTI-CORROSION COATINGS

3 S SPRAY Ref: Long lasting super lubricant Formulated with high adhesion improver additives. It does not drip. Excellent penetration capacity Its high fluidity makes easy its application and thanks to the fast solvent evaporation, it dries quickly allowing a perfect adhesion in inaccessible places Suitable for any moving parts from general and automotive industry It withstands vibrations, extreme pressures and high loads LITHIUM Ref: Multipurpose lithium grease To lubricate any mechanism type working under water or humidity influence High load-carrying capacity It contains anti-humidity and anticorrosion additives Consistency NLGI 1 grade It withstand temperatures between -20ºC and +140ºC SPRAY WITH PTFE Ref: Long lasting lubricant with a low friction coefficient High adhesion on metal, elastomer and plastic Good load-carrying and anti-wear capacity It withstand temperatures between -35ºC and +200ºC Suitable on any type of wire ropes, chains, bolts, open gears, spindles, etc. MoS2 Ref: High quality grease with molybdenum disulphide Special for mechanisms under high loads and /or vibrations It withstand temperatures between -20ºC and +180ºC Suitable for any surface, even elastomer, rubber, plastics Formula with anticorrosion additives HIGH TEMPERATURE Ref: It withstand temperatures between -20ºC and ºC (under dry lubrication with solid lubricants) Consistency NLGI 1 grade Lubricant with high performance micro-metallic particles Resistant to water and corrosion It provides an anti-seize effect It does not take fire SILICONE Ref: Rich in anticorrosion additives Anti-stick and waterrepellent thanks to the silicone oil in it It withstand temperatures between -40ºC and +300ºC Good thermal conductivity Excellent compatibility with elastomers and plastics It does not stain EXTREME PRESSURE KP-6 Ref: Special for open gears and wire ropes High adhesion Highly adhesive Low friction coefficient Full stability under high extreme stress It withstand temperatures up to 200ºC as semi-fluid lubricant and up to +500ºC as solid lubricant S

4 OILS MULTIPURPOSE LUBE Ref: By high capillarity effect, it penetrates the narrowest interstices, even along the grain boundaries, reaching places inaccessible by other means Rust-loosener: it looses seized and oxidized parts. It protects against corrosion It is a dielectric lubricant It displaces water and moisture: it permits the rapid drying out of wet electrical devices Special to protect aluminium and stainless steel It does not attack rubbers, plastics or paintings Suitable for protection and good operation of electrical and electronic equipments, starters, dynamos, spark plugs, batteries, etc. FOODSLIP SPRAY OIL with PTFE Ref: H-1 multipurpose oil for food industry It contains solid additives for low friction. Antiwear capacity Protection against corrosion and oxidation Formulated with the ingredients from the FDA CFR list It meets the USDA H-1 requirements CUTTING FLUID Ref: Suitable for hard and soft metals High refrigerating and anti-corrosion capacity Applicable at high cutting speed Minimum foam formation High protection against skin s trouble GRAPHITE LUBE Ref: Loos all: fluid and micronized graphite with high penetration effect Lubricant and penetrating oil with quick effect It allows loosing, sliding or unscrewing bolts, nuts, studs or any metallic part seized by time action, rust or dirtiness If applied during assembly, it will prevent oxidation formation and will make easier the further dismantling It dissolves the rust SILKROIL E-1 Ref: Mould-release product based on silicone polymers High lubricant and anti-adherent capacity Compatible with most of the plastics and rubbers Highly stable under extreme temperature Special for mould-release of plastic parts and as anti-spatter TAPPING FLUID Ref: Special for threading of hard, soft, stainless steels, etc. Recommended for manual or low speed threading It reduces drastically the friction generated heat Excellent performances for drilling, milling and turning OILS

5 SPECIFIC CONTACT CLEANER Ref: It improves the electrical-electronic equipments efficiency and reliability It cleans and degreases quickly and efficiently the dirtiness and deposits from any kind of electrical contact Suitable for any kind of electrical contact It keeps clean and dry the contacts, spark plugs, joints, terminals, etc. Free of chlorinated solvents, CFC and HCFC solvent bases DER Ref: Cleaner based on fast evaporation solvent It cleans and degreases any kind of parts and mechanism It removes grease, oil, lubricant, dust, deposit, etc. It avoids environment contamination by dust Its special solvent base allows dissolving hard to remove dirtiness BELT DRESSING Ref: It avoids the worn out drive belts slippage Very useful for ventilators and fans in automotive and industry It avoids overheating due to belt slippage Based on high adhesive resins ANTI SPATTER Ref: Anti-adherent for weld spatter It prevents the welding equipment nozzles choking Silicone free. Water-based. Non flammable SILICONE MOULD RELEASE FOR PLASTICS S-10 Ref: Mould release for any kind of plastic: polyester, polystyrene, ABS, PVC, polyamide, etc. High efficiency so less rejected parts It allows to mould complex and large parts High range of working temperature MOULD RELEASE FOR PLASTICS E-20 Ref: Silicone free mould release for plastics It allows further surface treatment: painting, metallizing, thermo welding, lithography, etc High lubricant capacity Easy to clean ESPECIFIC

6 RANGE KRAFFT, S.L. Ctra de Urnieta, s/n. P.O.Box 14 - E ANDOAIN - SPAIN Tel.: fax: export@krafft.es Ref An Illinois Tool Works Company