VELAMMAL ENGINEERING COLLEGE, CHENNAI

Transcription

1 VELAMMAL ENGINEERING COLLEGE, CHENNAI DEPARTMENT OF MECHANICAL ENGINEERING Name : Dr. S.Satish kumar Designation : Professor & Head Qualification : B.E.(Mech.), M.E., Ph.D Specialization : Manufacturing Technology hodmech@velammal.edu.in Phone : Education S.No. Degree Institution / University Year Branch of study / Specialization 1 B.E RVS College of Engineering, Dindigul Madurai Kamaraj University, Madurai 1996 Mechanical Engineering 2 M.E Regional Engineering College, Tiruchirappalli Bharadhidasan University, Tiruchirappalli 1997 Manufacturing Technology 3 Ph.D. Regional Engineering College, Tiruchirappalli Anna University, Chennai 2007 Machining Experience Name of the College / Industry Position Held From To Total years Velammal Engineering College, Chennai Prof.& Head 12/07/2016 As on 15/1/19 2 yrs 6 M Velammal Engineering College, Chennai Professor 03/06/ /07/ yrs 1 M St. Joseph s College of Engg., Chennai Professor 01/06/ /3/ yrs 10 M St. Joseph s College of Engg, Chennai Asst. Professor 01/06/ /05/ yrs St. Joseph s College of Engg, Chennai Lecturer 09/11/ /05/ yrs 7 M Om Soft Pvt. Ltd., Chennai Appl. Developer 16/8/ /09/ yrs 1 M Erode Sengunthar Engg. College, Erode Lecturer 03/06/ /05/ yr Total Experience 20 yrs 1M Area of Interest Nano Finishing Process Advanced Machining Process Application of Soft computing techniques in Manufacturing Systems Manufacturing Process Selection and Process Parameter Optimization Solid state welding process

2 Investigations of different cooling Sponsored Research Title Funding Agency Amount Status conditions in Drilling of Glass Fiber Reinforced Plastic (GFRP) composite pipes Non destructive testing lab & Computerised variable compression ratio and multi fuel engine laboratory. Low cost Commercial CNC router NRB, Defence Reasearch and Development Organisatiosn, Govt. of India, New Delhi (Principal Investigator) DST FIST (Institutional Project. Coordinator) DST IEDC (Mentor) Rs. 12,66,000 Rs. 20,00,000 Rs 2,50,000 Completed Completed Ongoing Academic Research ( Ph.D Thesis supervision) Title of Thesis Name of the Scholar Status Optimization of EDM process parameters in machining of Inconel Degree awarded P. Senguttuvel 718 Alloy 2013 Machinability studies of GFRP composites Degree awarded K. Jessy 2014 Experimental Investigation of the Drilling Process on Thick epoxy Degree Awarded B. Ramesh composites 2017 Optimization of friction welding parameters in AISI 304L austenitic stainless steel to copper joints C. Sanjeevi Thesis Submitted Nano finishing aluminium alloys using Magneto Rheological grinding Process L. Prabhu Thesis Submitted Experimental Investigation and Material Characterisation of Synopsis K.S.Sreenivasan Friction welded AA7075-SiCp Metal matrix composite. Submitted. Influence of Volume Fraction and grain size on recast layer in machining of AlSiC 4 and AlB 4C using EDM Ramesh Udhayakumar Ongoing Investigation of Friction welded joints of Aluminium alloys M.Martin Charles Ongoing Investigation of machinability characteristics of Shape memory alloys using EDM for defense applications Magnetorheological Nano coating of vane actuators for enriching trobological properties P.Senthil kumar Ongoing S. Assaikani Ongoing

3 List of publications ( Recent Publications) JOURNALS PUBLISHED. 1. K. Sreenivasan, S. Satishkumar, (2018) Multi-objective Optimization of Friction Welding Process Parameters using Grey Relational Analysis for Joining Aluminium Metal Matrix Composite, Material science, ISSN : , 24(2), Impact factor : B. Ramesh, A. Elayaperumal, S. Satishkumar, Anish Kumar, (2018) Drilling of pultruded and liquid composite moulded glass/epoxy thick composites: Experimental and statistical investigation, Measurement, 114, Impact factor : B. Ramesh, A. Elayaperumal, S. Satishkumar, Anish Kumar, T. Jayakumar, D. Dinakaran, (2017) Influence of Cooling on the Performance of the Drilling Process of Glass Fibre Reinforced Epoxy Composites, Archives of Civil and Mechanical Engineering, ISSN: ,16 (1) Impact Factor: K. Jessy, D. Dinakaran, S. Satish Kumar, (2015) Investigating the Fluctuations in Tool Vibration During GFRP Drilling Through Recurrence Quantification Analysis, Journal of Mechanical Science and Technology, ISSN: X, 29 (3) Impact Factor: K. Jessy, S. Satish Kumar, D. Dinakaran, V. Seshagiri Rao, (2015) Influence of Different Cooling Methods on Drill Temperature in Drilling GFRP, The International Journal of Advanced Manufacturing Technology, ISSN: , 76 (1-4) Impact Factor: 1.458, 6. B. Ramesh, A. Elayaperumal, S. Satishkumar, Anish Kumar, T. Jayakumar, (2015) Effect of Drill Point Geometry on Quality Characteristics and Multiple Performance Optimization in Drilling of Nonlaminated Composites, Proceedings of the Institution of Mechanical Engineers, Part L; Journal of Materials: Design and Applications, ISSN: , DOI: / Impact Factor: B. Ramesh, A. Elayaperumal, S. Satishkumar,(2015) Drillability Study of Pultruded and Sheet Moulding Compound Thick Polymeric Composites, Proceedings of the Institution of Mechanical Engineers, Part B; Journal of Engineering Manufacture, ISSN: , DOI: / , Impact Factor: B. Ramesh, A. Elayaperumal, S. Satishkumar, Anish Kumar, T. Jayakumar, (2015) Experimental Investigation of the Effect of Different Cooling Methods on Drill Induced Damage in Pultruded Composites, Polymer Composites. ISSN: DOI: /pc April Impact Factor: C. Shanjeevi, S. Satish Kumar, P. Sathiya, (2014), Multi- Objective Optimization of Friction Welding Parameters in AISI 304L Austenitic Stainless Steel and Copper Joints, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, ISSN: , DOI: / , Impact Factor: B. Ramesh, A. Elayaperumal, S.Satishkumar, (2014) Effect of the Standard and Special Geometry Design of a Drill Body on Quality Characteristics and Multiple Performance Optimization in Drilling of Thick Laminated Composites, Procedia Engineering, ISSN: , 97 (2014) Impact Factor: CONFERENCES 1. C. Shanjeevi, S. Satish Kumar, P. Sathiya, Pankaj Neog. (2015). Parameter optimization in friction welding of ferritic stainless steel and copper joint using response surface methodology, Proceedings of International Conference on Advances in Materials, Manufacturing and Applications ( AMMA th to 11th April 2015), ISBN: , pp , National Institute of Technology, Tiruchirappalli. 2. B. Ramesh, A. Elayaperumal, S. Satishkumar. (2014) Application of Taguchi and ANOVA in the Optimization of Process Parameter Levels for Surface Finish and Hole Diameter Accuracy in Dry Drilling

4 of Thick Pultruded Composites, Proceedings of the International Conference on Advances in Design and Manufacturing ( ICAD&M 14 5th to 7th December 2014), ISBN: , pp , National Institute of Technology, Tiruchirappalli. 3. C. Shanjeevi, S. Satish Kumar, P. Sathiya. (2014). Investigations on the mechanical properties and microstructure of copper and ferritic stainless steel using friction welding, Proceedings of the International Conference on Advances in Design and Manufacturing ( ICAD&M 14 5th to 7th December 2014), ISBN: , pp , National Institute of Technology, Tiruchirappalli. 4. B.Ramesh, A.Elayaperumal, S.Satishkumar. (2013). Statistical analysis and optimization study on the machinability of high fiber weight fraction GFRP polymeric composites in conventional drilling, Proceedings of The 2nd International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM, December 16th 18th 2013), ISBN: , pp , Indian Institute of Technology Indore, India. 5. C. Shanjeevi, S. Satish Kumar, P. Sathiya. (2013). Optimization of friction welding parameters for austenitic stainless steel and copper joint by using statistical approach, Proceedings of The 2nd International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM, December 16th 18th 2013), ISBN: , pp , Indian Institute of Technology Indore, India. 6. Shanjeevi.C, Satish Kumar.S, Sathiya.P,Evaluation on Impact Properties of Dissimilar Materials by using Taguchi Method, National Conference on Design, Materials & Constructions, (NCDMC-14), Vel Tech University, March 5-6, Shanjeevi.C, Satish Kumar.S, Sathiya.P, Studies on Impact toughness and fracture analysis of Austenitic stainless steel and copper joints by friction welding. National Conference on Recent Advances in Welding and Surface Engineering (RAWSE 14), Annamalai University, Chidambaram, March 26-27, Nakandhrakumar RS, Dinakaran D, Satishkumar S, Pattabiraman, Normalization of distance variation in sensor positioning for tool condition monitoring through vibration analysis in drilling. International Conference on computer aided Engineering (CAE 2013) IIT, Madras, Dec 19-21, Shanjeevi.C, Satish Kumar.S, Sathiya.P,Optimization of Friction Welding parameters for austenitic stainless steel and copper joint by using statistical approach International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM 2013) IIT, Indore, Dec 16 18, B Ramesh, A Elayaperumal and S Satish Kumar, Statistical analysis and optimization study on the machinability of high fiber weight fraction GFRP polymeric composites in Conventional drilling, International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM 2013) IIT, Indore, Dec 16 18, 2013 Research Citations Scopus Author ID : Research gate Google Scholar

5 Workshops / Seminars Attended Workshop on HIGH IMPACT PRESENTATION SKILLS organized by Dale Carnegie & Associates, Inc. Trainer and Wipro at St.Joseph s College of Engineering, Chennai during 28 th and 29 th January 2008 Workshop on MICRO MACHINING organized by Department of Production Engineering, National Institute of Technology, Tiruchirappalli during 18 th and 19 th December Workshop on OPEN SOURCE AND IBM SOFTWARE organized by IBM academic initiative at St. Joseph s College of Engineering, Chennai during 20 th and 21 st April 2007 Workshop on OPTIMIZATION ALGORITHMS FOR MANUFACTURING APPLICATIONS (Under TEQIP Community Service) organized by Department of Production Engineering, National Institute of Technology, Tiruchirappalli during 9 th and 10 th June Workshop on COMPUTER AIDED MANUFACTURING (Under TEQIP Community Service) organized by Department of Production Engineering, National Institute of Technology, Tiruchirappalli during 2 nd and 3 rd December 2005 AICTE sponsored seminar on RELIABILITY OF RENEWABLE ENERGY SYSTEMS WITH SPECIAL REFERENCE TO WIND ENERGY SYSTEM organized by Anna University, during 17 th and 18 th November 2000 Workshop on CAD/CAM/CAE organized by department of Mechanical Engineering, Kongu Engineering College, Perundurai, Erode during 19 th and 20 th February 1999 Workshop on STRAIN GAGES IN STATIC AND DYNAMIC MEASUREMENTS jointly organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai and continuing education programme, AICTE during 3 rd and 4 th November 1995 Books Published Experimental Investigation of the Drilling Process on Thick epoxy composites Scibay Publications ( 2017) ISBN: Memberships in Professional Societies Member of Indian society of Technical Education. Life Fellow - Indian institution of Production Engineers.