EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works

Transcription

1 EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6

2 1 Project overview ACCIONA s Engineering, Procuring & Construction (EPC) contract will deliver the first of its kind in Australia, a $700 million project in the Kwinana Industrial Area which will process up to 400,000 tonnes a year of household waste. Using best practice technologies and processes, the facility will export an estimated 36MW of electricity back to the grid enough to power around 50,000 homes. 2 Summary of package Mechanical Works for pipe assembly, including but not limited to fittings, valves and accessories for the entire power block. 3 Standards applicable to the Project AS/NZS Pressure equipment AS Pressure vessels AS Pressure equipment boilers AS Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels AS Certification of welders and welding supervisors AS Flanges for piping, valves and fittings AS Boilers safety management and supervision systems AS Pipelines Gas and liquid petroleum-design and construction AS/NZS Qualifications of welders for fusion welding of steels AS Pressure equipment Operation and maintenance ÁS Pressure equipment Installation AS Pressure equipment Conformity assessment PAGE 2 OF 6

3 AS/NZS Pressure equipment Welding and brazing qualification AS Pressure equipment Examination and testing AS Pressure piping AS Pressure equipment Manufacture AS ISO The International System of Units (SI) and its application AS Safety signs for the occupational environment AS Technical drawing AS (set) 2007 Graphical symbols for general engineering AS 1269 (set) 2005 Occupational noise management AS/NZS Eye and face protection guidelines AS 1580 (set) 2002 Paints and related materials AS Fixed platforms, walkways, stairways and ladders Design, construction and installation AS Selection, use and maintenance of respiratory protective equipment AS Respiratory protective devices AS/NZS (set) 2006 Safety in laboratories Chemical aspects AS Guide to noise and vibration control on construction, demolition and maintenance sites AS Colour standards for general purposes AS Welding, brazing and cutting of metals glossary of terms AS Welding positions AS/NZS Occupational protective clothing Guidelines on the selection, use, care and maintenance of protective clothing AS/NZS ISO Quality management systems Fundamentals and vocabulary AS/NZS ISO Quality management systems Requirements AS/NZS ISO Risk management Principles and guidelines HB The Construction Industry Guide to ISO 9001:2000 AS/NZS ISO Refrigerants designation and safety classification AS Non-destructive testing ultrasonic testing of carbon and low alloy steel forgings AS Steel tubes and tubulars for ordinary service AS (set) 2015 ISO metric hexagon bolts and screws Product grades A and B Part 1: Bolts AS 1111 (set) 2015 ISO metric hexagon bolts and screws PAGE 3 OF 6

4 AS 1112 (set) 2015 ISO metric hexagon nuts AS Cold-formed structural steel hollow sections AS Methods for magnetic particle testing of ferromagnetic products and components AS/NZS Hot-dip galvanized coatings on threaded fasteners AS (set) 2002 Plain washers for metric bolts, screws and nuts for general purposes General plan AS Bourdon tube pressure and vacuum gauges AS Metric screw threads for fasteners AS/NZS Tolerances for flat-rolled steel products AS Round steel wire for ropes AS Continuous hot-dip metallic coated steel sheet and strip Coatings of zinc and zinc alloyed with aluminium and magnesium AS Copper tubes for plumbing, gas fitting and drainage applications AS Steel tubes for mechanical purposes AS/NZS PVC pipes and fittings for pressure applications AS Hot-dip galvanised steel bolts and associated nuts and washers for tower construction AS/NZS Copper and copper alloys Wrought rods, bars and sections AS Copper and copper alloys seamless tubes for heat exchangers AS/NZS Copper seamless tubes for air-conditioning and refrigeration AS/NZS Hot-rolled steel flat products AS (set) 2003 Metal finishing preparation and pre-treatment of surfaces AS Water supply metallic gate, globe and non-return valves AS (set) 2002 Methods of test for elastomers AS Non-destructive testing of carbon and low alloy steel plate test methods and quality classifications AS Pipe threads of Whitworth form Fastening pipe threads AS Iron castings - grey cast iron AS Double cast iron AS Non-destructive testing glossary of terms AS Non-destructive testing penetrant testing of products and components AS Calibration blocks and their method of use in ultrasonic testing AS Non-destructive testing eddy current testing of metal tubes PAGE 4 OF 6

5 AS Non-destructive testing radiography of welded butt joints in metal AS Non-destructive testing ultrasonic testing of fusion webbed joints in carbon and low alloy steel AS/NZS Ductile iron pipes and fittings AS Non-destructive testing AS Bolts, stud bolts and nuts for flanges and other high and low temperature applications AS Grey iron pressure fittings AS Hose and hose assemblies for air AS/NZS Non-destructive testing ultrasonic testing of steel castings and classification of quality AS/NZS Pre-finished/pre-painted sheet metal products for interior/exterior building applications performance requirements AS Non-destructive testing ultrasonic methods evaluation and quality classification of metal bearing bonds AS Self-drilling screws for the building and construction industries AS Hydraulic hose AS/NZS Polyethylene (PE) pipes for pressure application AS Polyethylene (PE) compounds for pressure pipes and fittings AS (set) 2015 Mechanical properties of fasteners made of carbon steel and alloy steel AS Pressure equipment hazard levels AS/NZS Zinc and zinc/aluminium-alloy coatings on steel wire AS/NZS Hot-dip galvanised (zinc) coatings on fabricated ferrous articles AS/NZS Hot-dip galvanized (zinc) coatings on ferrous open section AS/NZS Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialised process AS ISO Non-destructive testing qualification and certification of NDT personnel AS (set) 1997 Acoustics Description and measurement of environmental noise General procedures AS (set) 1990 Acoustics Measurement of airborne noise emitted by rotating electrical machinery Engineering method for free-field conditions over a reflective plane AS Industrial fuel fired appliances AS Design of rotating steel shafts AS (set) 2002 Cranes, hoists and winches General requirements PAGE 5 OF 6

6 AS Installation of upvc pipe systems AS Installation of polyethylene pipe systems AS Surface roughness comparison specimens AS Smoke/heat release vents AS (set) 2004 Methods of testing smoke/heat release vents AS (set) 2011 Cranes, hoists and winches AS Smoke/heat venting systems AS Fluid power pneumatic systems and components AS/NZS Plumbing and drainage Part 1: Water services AS/NZS Plumbing and drainage Part 2: Sanitary plumbing and drainage AS/NZS Plumbing and drainage Part 3: Stormwater drainage AS/NZS Plumbing and drainage Part 4: Heated water services AS The storage and handling of corrosive substances AS/NZS Pressure equipment - in-service inspection AS Mechanical equipment - steelwork AS (set) 2001 Hydraulic fluid power particulate contamination of systems AS (set) 2014 Safety of machinery General principles Basic terminology and methodology AS The storage and handling of gases in cylinders AS Liquid-chilling packages using the vapour compression cycle AS Lifting devices AS/NZS (set) 2016 Refrigerating systems and heart pumps Safety and environmental requirements AS/NZS (set) 2013 Gas installations Part 1: General installations AS ISO Rotodynamic pumps hydraulic performance acceptance tests grades 1, 2 and 3 AS Identification of the contents of piping, conduits and ducts AS (set) 1993 Measurement of fluid flow in closed conduits AS (set) 1995 Secondary source emissions 4 Instructions To submit an expression of interest, please complete the attached Appendix, including requested appended documentation and upload to the ICN Gateway page for the project ( PAGE 6 OF 6