R-CAS-V Spin-In Capsule with Threaded Rods

Transcription

1 R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA Product information Features and benefits Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7) High performance for use safety critical application - heavy-duty fastenings with small spacing and edge distances The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required Capsule contains precise amounts of ingredients making it a very consistent product Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water Suitable for dry or wet non-cracked concrete Styrene free - odourless Applications Threaded rods Balustrading Railings Heavy machinery Structural steel Steel columns Cladding restraints Curtain walling Fencing & gates manufacturing and installation Formwork support systems Garage doors Guard rails Base materials Approved for use in: Non-cracked concrete C20/25-C50/60 Also suitable for use in: Natural Stone (after site testing) Installation guide 1

2 Product information 1. Drill hole to the required diameter and depth for capsule size being used. 2. Clean the hole thoroughly with brush and hand pump at least four times before installation. 3. Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system. 4. Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached. 5. Leave the anchor undisturbed unitl the curing time elapses. 6. Attach fixture and tighten the nut to the required torque. Size Product Code Description / Resin Type M8 M10 M12 M16 M20 M24 M30 R-CAS-V-08 R-CAS-V-10 R-CAS-V-12 R-CAS-V-16 R-CAS-V-20 R-CAS-V-24 R-CAS-V-30 Styrene Free Vinylester Resin Installation data R-STUDS Thread diameter d [mm] Hole diameter in substrate d 0 [mm] Capsule size [mm] Capsule diameter d c [mm] Installation torque T inst [Nm] Min. hole depth in substrate h 0 [mm] + 5 Installation depth [mm] Min. substrate thickness h min [mm] Min. spacing s min [mm] Min. edge distance c min [mm] Minimum working and curing time Resin temperature Concrete temperature Curing time* Working time [ C] [ C] [min] [min]

3 Mechanical properties R-STUDS Nominal ultimate tensile strength - tension f uk [N/mm 2 ] Nominal yield strength - tension f yk [N/mm 2 ] Cross sectional area - tension A s [mm 2 ] Elastic section modulus W el [mm 3 ] Characteristic bending resistance M 0 Rk,s [Nm] Design bending resistance M [Nm] Allowable bending resistance M rec [Nm] Nominal ultimate tensile strength - tension f uk [N/mm 2 ] Nominal yield strength - tension f yk [N/mm 2 ] Cross sectional area - tension A s [mm 2 ] Elastic section modulus W el [mm 3 ] Characteristic bending resistance M 0 Rk,s [Nm] Design bending resistance M [Nm] Allowable bending resistance M rec [Nm] Nominal ultimate tensile strength - tension f uk [N/mm 2 ] Nominal yield strength - tension f yk [N/mm 2 ] Cross sectional area - tension A s [mm 2 ] Elastic section modulus W el [mm 3 ] Characteristic bending resistance M 0 Rk,s [Nm] Design bending resistance M [Nm] Allowable bending resistance M rec [Nm] Basic performance data Performance data for single anchor without influence of edge distance and spacing - ETAG 001 Substrate Non-cracked concrete Effective embedment depth h ef [mm] MEAN ULTIMATE LOAD TENSION LOAD N Ru,m [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn] SHEAR LOAD V Ru,m [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn] CHARACTERISTIC LOAD TENSION LOAD N Rk [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn] SHEAR LOAD V Rk [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn]

4 Basic performance data DESIGN LOAD TENSION LOAD N Rd [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn] SHEAR LOAD V Rd [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn] RECOMMENDED LOAD TENSION LOAD N rec [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn] SHEAR LOAD V rec [kn] [kn] R-STUDS METRIC THREADED RODS - A4 [kn]

5 Design performance data R-STUDS Effective embedment depth h ef [mm] TENSION LOAD STEEL FAILURE; STEEL Characteristic resistance N Rk,s [kn] STEEL FAILURE; STEEL Characteristic resistance N Rk,s [kn] STEEL FAILURE; STEEL GRADE A4-70 Characteristic resistance N Rk,s [kn] COMBINED PULL-OUT AND CONCRETE CONE FAILURE; NON-CRACKED CONCRETE, C20/25 (40 C/24 C) Characteristic bond resistance T Rk [N/mm 2 ] COMBINED PULL-OUT AND CONCRETE CONE FAILURE; NON-CRACKED CONCRETE, C20/25 (80 C/50 C) Characteristic bond resistance T Rk [N/mm 2 ] COMBINED PULL-OUT AND CONCRETE CONE FAILURE Increasing factors for N Rd,p - C30/37 Ψ c Increasing factors for N Rd,p - C40/50 Ψ c Increasing factors for N Rd,p - C50/60 Ψ c CONCRETE CONE FAILURE Factor for non-cracked concrete k Factor for non-cracked concrete k ucr,n Edge distance c cr,n [mm] Spacing s cr,n [mm] CONCRETE SPLITTING FAILURE STEEL FAILURE; STEEL SHEAR LOAD Characteristic resistance without lever arm V Rk,s [kn] Ductility factor k Characteristic resistance with lever arm M Rk,s [Nm] STEEL FAILURE; STEEL Characteristic resistance without lever arm V Rk,s [kn] Ductility factor k Characteristic resistance with lever arm M Rk,s [Nm] STEEL FAILURE; STEEL GRADE A4-70 Characteristic resistance without lever arm V Rk,s [kn] Ductility factor k Characteristic resistance with lever arm M Rk,s [Nm] CONCRETE PRY-OUT FAILURE Factor k CONCRETE EDGE FAILURE Anchor diameter d nom [mm] Effective length of anchor l f [mm] Combined pull-out and concrete cone failure (TR 029, p acc. to formula 5.2a - N 0 Rk,p =π*d*h ef *τ Rk ). Concrete cone failure (TR 029, p acc. to formula 5.3a - N 0 Rk,c =k 1 *f ck,cube0,5 *h ef 1,5 ). h ef = 5

6 Product commercial data Size Product Code Quantity [pcs] Weight [kg] Box Outer Pallet Box Outer Pallet Bar Codes M8 R-CAS-V-08 1) M10 R-CAS-V-10 1) M12 R-CAS-V-12 1) M16 R-CAS-V-16 1) M20 R-CAS-V-20 1) M24 R-CAS-V-24 1) M30 R-CAS-V-30 1) ) ETA