Trilax. Data Facts. and all individual requirements. 1/5

Transcription

1 Trilax Data Fact The ignificant dicovery embodied in thi chair concept i that three pivot point are needed in order to correctly upport the body ergonomically in every poition. Trilax relaxe and move with the body like a econd kin. The ynthei of ergonomic and deign i the characteritic feature of the entire programme of thi extenive product family, created for every area of application and all individual requirement. 1/5

2 Trilax material claification Trilax material claification Chair Mat Trilax 1 9 Trilax contructiona the chair at the end o majority of the part. manufacture of the co Polyamide PA6, 30% The material flah p i 450 C. The mate temperature of 350 C Adjutment lever, line Glamat reinforce GRT i produced from fibre. The material i the manufacture of d Seat hell, back hell Polyamide (PA6 / P Polyamide PA6, 30% fiber-gla reinforced Glamat reinforced thermoplatic (GMT) Polyamide (PA6 / PA66 / PA12) Polypropylene (PP), acrylonitrile butadiene tyrene (ABS) Aluminium (preure die-cating) Steel part PU oft foam upholtery The material flah p i 450 C. The materia perature of 350 C. Locking lide, guide b armret top cover Tril Polypropylene (PP) Material flah poi 330 C. The material d ature of C 2/5 Cap, armret Trilax 6

3 Chair Material Conception Trilax Trilax contructional deign allow for eay diaembly of the chair at the end of their life and permit recycling of the majority of the part. The following material are ued in the manufacture of the component: Polyamide PA6, 30 % fiber-gla reinforced The material flah point i 400 C. It ignition temperature i 450 C. The material decompoe when expoed to a temperature of 350 C. recycled. Adjutment lever, liner, turn handle, lever coupler, waher. Glamat reinforced Thermoplatic (GRT) GRT i produced from 60 % Polypropylene and 40 % gla fibre. The material i extremely tough and impact-reitant. recycled. Polypropylene i uitable for the manufacture of downcycling product. Seat hell, back hell, lumbar hell. Polyamide (PA6/PA66/PA12) The material flah point i 400 C. It ignition temperature i 450 C. The material decompoe when expoed to a temperature of 350 C. recycled. Locking lide, guide buhing, leeve, glide, twin cator, armret top cover Trilax 6 9, armret Trilax 1 5. Polypropylene (PP) Material flah point: n/a. The ignition temperature i 330 C. Thematerial decompoe when expoed to a temperature of C. recycled. Cap, armret Trilax 6 9. Impact-reitant Polytyrene (SB) Material flah point: n/a. The ignition temperature i C. The material decompoe when expoed to a temperature of 270 C. recycled. Support collar, telecopic pipe, tandpipe covering, covering pipe. Laminated beechwood, bonded The wooden component are made either of rotary-cut veneer with 5 % et glue (aminoplat rein) or of bonded beech plywood with 6 % glue. recycled. Cantilever tringer, cuhion upport for upholtered armret Trilax 4+5 und Trilax 8+9. Aluminium (preure die-cating) The alloy fulfill the DIN 1725 tandard. Aluminium diecating are noted for their turdine; they are eay to work and to finih. They have different polihing grade and come in a variety of epoxy powder coating in different colour. recycled. Lumbar upport, upport, central plate, torion lever, 5- prong bae, tapered. Steel part The breaking, tenile, torional and bending trength of the teel part i extremely high but varie with the quality grade. After galvanic treatment the part are non-corroive. The material decompoe when expoed to a temperature of 1100 C. recycled. Bolt, crew, circlip, compreion pring, axle, pindle, fixing device, locking lever, latch, pullbar, pipe axle, locking plate, lide axle, torion rod, cap, locking pring, tenion pring. Steel part coated (paint) and chromed The breaking, tenile, torional and bending trength of the teel part i extremely high but varie with the quality grade. After galvanic treatment the part are non-corroive. The part are coated with epoxy powder. The material decompoe when expoed to a temperature 1100 C. recycled. Cantilever bae, cro beam. PU oft foam upholtery material Flah point and ignition temperature: n/a. Rate of pread of fire according to DIN 75200/FMVSS 302, correpond to 80 mm/min. No thermal decompoition when ued a deignated. The PU oft foam upholtery material i free of CFC. Denity according to DIN for eat and back upport: 51kg/m3. Ye, all part can be recycled. They are proceed into lower-grade compoite foam. Seat, lumbar and back cuhion, armret cuhion. 3/5

4 Adheive All adheive for upholtery conit of ynthetic rein (18 to 25 %) and a mixture of olvent (75 to 82 %). Thee adheive are free of toluol. No thermal decompoition when ued a deignated. With proper handling there will be no hazardou decompoition product nor hazardou reaction. Ye, when et, the adheive including the bonded material can be proceed into filling material. For upholtery. Cover material For detail about material compoition, pleae refer to repective fabric and leather pattern card. Ye, ome fabric made from natural fibre can be returned to the upplier, where the cover are hredded and reued in the production of cover. Cover fabric made from ynthetic material can be recycled. The leather cover are tanned and dyed uing method which enure problem-free compoting. Fabric and leather cover. Additional information joint The Trilax chair conit of numerou ingle component all of which are mechanically joined. Owing to thee inertion and crew joint the chair are eay to diaemble into dicrete component of each recycling category. Exception: The PU oft foam upholtery (eat and back cuhion) i glued to the upholtery hell and to the cover material. Additional information material deignation Armret, oft foam upholtery and armret top cover of Trilax 6 9 which are made of polypropylene (PP) and polyamide (PA) are labelled with the material deignation for recycling. 4/5

5 Quality Girberger pay cloe attention to product quality. Thi include rigorou quality management, adherence to international and national tandard a well a participation in ambitiou deign competition. Thee effort guarantee our cutomer top quality, cloe proximity to our market and appealing deign all in one. Quality The Trilax complie with the following tandard. DIN 4551 BIFMA AFNOR NFD 61-04/041 Germany USA France At Girberger, quality i a century-old tradition. Today thi include rigorou quality management in accordance with the ISO 9001 tandard a well a participation in tough international competition. The Trilax complie with the following tandard. EN 1335 Europe ANSI BIFMA USA AFNOR NFD 61-04/041 France Girberger Holding AG, Girberger AG, CH-Bützberg, Girberger GmbH, D-Endingen comply with the requirement of the ISO EN 9001 quality aurance ytem: Certificate quality aurance in deign/development, production, aembly and cutomer ervice. Certificate SQS herewith certifie that the company named below ha a management ytem which meet the requirement of the tandard pecified below. SQS herewith certifie that the company named below ha a management ytem which meet the requirement of the tandard pecified below. Girberger GmbH Girberger AG Endingen Germany 4922 Bützberg Switzerland Certified area Certified area Whole Company Whole Company ent Sy g em t namanufacture and ditributioneof office eating d lan zer it Sw Swi Aociation for Quality and Management Sytem SQS Berntrae 103, CH-3052 Zollikofen Iue date: May 18, 2013 a Cer t i f i ed M Cer t i f i ed M ISO 14001:2004 Environmental Management Sytem Field of activity by Standard Quality Management Sytem ent Sy t g em namanufacture and ditributioneof office eating m ISO 9001:2008 m a Field of activity by Standard ISO 9001:2008 Quality Management Sytem ISO 14001:2004 Environmental Management Sytem d lan zer it Sw Swi Aociation for Quality and Management Sytem SQS Berntrae 103, CH-3052 Zollikofen Iue date: May 18, 2013 Thi SQS Certificate i valid up to and including May 17, 2016 Scope number 5, 6 Regitration number The Trilax family hold the certificate of proven product afety iued by the Bavarian Trading Standard Department. Thi SQS Certificate i valid up to and including May 17, 2016 Scope number 5, 6 Regitration number The Trilax family hold the certificate of proven product afety iued by the Bavarian Trading Girberger Holding AG, Girberger AG, CH-Bützberg, Girberger GmbH, D-Endingen, comply Standard Department. X. Edelmann, Preident SQS R. Glauer, CEO SQS X. Edelmann, Preident SQS R. Glauer, CEO SQS IO N CER CER Swi Made Truted Cert N IS SW S TI FI CAT SCESm 001 IO IS SW S TI Truted Cert FI CAT SCESm 001 Swi Made with the requirement of the ISO 9001:2008 quality aurance ytem: quality aurance in deign/development, production, aembly, ale and cutomer ervice. Girberger AG, Bützberg, CH Girberger AG, Wien, A Girberger France, Pari, F Girberger GmbH, Endingen, D Girberger UK, London, GB Girberger Benelux BV, Amterdam, NL Tuna Girberger Tic. AS, Silivri, TR mail@girberger.com The Trilax ha received the Good Product Deign award in Japan a well a other deign award from IBD Product Deign Award USA. The Trilax ha received the Good Product Deign award in Japan a well a other deign award from IBD Product Deign Award USA. 5/5