ACREL.it. Baylight Streetlight Wall light. ACREL srl. Via Forte Garofolo, San giovanni Lupatoto VERONA ITALY

Transcription

1 ACREL.it Baylight Streetlight Wall light ACREL srl Via Forte Garofolo, San giovanni Lupatoto VERONA ITALY

2 Content Floodlight Series Page : 1-2 Wallpack Light Series Page : 3-6 SUMMARY Street Light Series Page : 7-10 Highbay Light Series Page : Led Tube Series Page : 13-14

3 Floodlight Series Adoption exclusive light source and ZAG Lens.Compared with similar products,the luminous efficiency can rise 8% and light transmittance up to 98%. Fan channel thermal design, reduce lamp weight, with excellent heat dissipation, reduce light decay, prolong lamp lifetime. CHEM modular design, effectively reduce maintenance costs. Driven by high efficiency constant current and 60% energy-saving than traditional lamps; over current protection, overvoltage protection, lightning protection, high temperature protection, fully ensures the long life span and high stability. : / / 50-60Hz Alumlnum alloy lamp body extruslon/surface coated with high temperature PC lens MS-FL W 100W 170LM/W ±5% 302*176*225mm MS-FL W 150W 170LM/W ±5% 302*264*225mm MS-FL W 200W 170LM/W ±5% 302*352*225mm MS-FL W 250W 170LM/W ±5% 302*440*225mm Tunnel,Factory,Stadium,Warehouse,hall,auditorium,etc. 1 2

4 Wall Pack Light Series Cutoff Wall Pack Heavy duty die-cast aluminum housing, fully sealed to be dirt and bug proof. Integral secondary heat sink to optimize thermal transfer and maximize. Driver is mounted in direct contact with the casting for a low operating temperature and long life. Polyester powder-coated finish, rust and corrosion proof; stabilized to extreme climate changes without cracking or peeling. : / / Die Casting aluminum alloy lamp body / surface high Glass lens MS-CWPL01A-30W 30W 120LM/W ±5% 332*235*182mm 90 *130 MS-CWPL01A-40W 40W 120LM/W ±5% 332*235*182mm 90 *130 MS-CWPL01A-60W 60W 120LM/W ±5% 332*235*218mm 90 *130 MS-CWPL01A-90W 90W 120LM/W ±5% 332*235*218mm 90 *130 Outdoor walkways, entry ways, pathways, landscape lighting, public area floodlights, and security lighting. 3 4

5 Wallpack Light Series Full Cutoff Wall Pack Heavy duty die-cast aluminum housing, fully sealed to be dirt and bug proof. High quality shatterproof glass refractor. Integral secondary heat sink to optimize thermal transfer and maximize. Polyester powder-coated finish, rust and corrosion proof; stabilized to extreme climate changes without cracking or peeling. : / / Die Casting aluminum alloy lamp body / surface high Glass lens MS-FWFPL01B-40W 40W 130LM/W ±5% 362.5*299*232.5mm 130 MS-FWPL01B-60W 60W 130LM/W ±5% 362.5*299*232.5mm 130 MS-FWPL01B-90W 90W 130LM/W ±5% 362.5*299*232.5mm 130 Houses, buildings, hotels, parks, restaurants, supermarkets and any other outdoor 5 6

6 Street Light Series Shoe Box Super thin design, easy transportation and installation High quality ADC12 die casting aluminum heat sink, hollow out fins design provide excellent heat dissipation New style module lens design make this fixture suitable for varies of lighting distributing requirements CREE LED, high luminous Efficency up to 150lm/w and long working life Photocell/motion sensor control and surge protector options available : / / Type3 Die casting aluminum alloy lamp body / surface high PC lens Major Roadway, Residential Streets, Pedestrian Walkways, Expressway. Parking Lot, Docks and Piers. High crime areas, Square soprt guounds. Industrial plants and other advertising lights. 7 Type5 Type4 495*310*84mm MS-ST04-70W 70W MS-ST04-100W 100W 495*310*84mm MS-ST04-120W 120W 621*310*84mm MS-ST04-150W 150W 621*310*84mm MS-ST04-180W 180W 621*310*84mm MS-ST04-200W 200W 621*310*84mm MS-ST04-240W 240W 769*320*84mm 8

7 Street Light Series led modules for street light is high bright; high Efficency; long service life; No UV interference, no noise, no flickering, no glass bulbs and no mercury; Convenient installation, angle adjustable, horizontal and vertical installation available, wide application and practical. : / / Die casting aluminum alloy lamp body / surface high PC lens 9 490*350*95mm MS-ST05-50W 50W MS-ST05-100W 100W 572*350*95mm MS-ST05-150W 150W 654*350*95mm MS-ST05-200W 200W 736*350*95mm MS-ST05-250W 250W 818*350*95mm Major Roadway, Residential Streets, Pedestrian Walkways, Expressway. Parking Lot, Docks and Piers. High crime areas, Square soprt guounds. Industrial plants and other advertising lights. 10

8 Highbay Light Series Hollow heat sink design increase more airflow for better heat dissipation. Waterproof design, suitable to damp & wet location. Two dimensions. Lighter weight and smaller volume can help customer save freight cost. : / / Die Casting aluminum alloy lamp body / surface high Glass cover Lumen Efficency MS-UHB4C-100W 100W ø260*185mm 60 /90 /120 MS-UHB4C-150W 150W ø260*185mm 60 /90 /120 MS-UHB4C-200W 200W ø290*197mm 60 /90 /120 MS-UHB4C-240W 240W ø290*197mm 60 /90 /120 Warehouses,Workshops,Factory buildings,sport courts,toll both 11 12