Steel Reference materials

Size: px

Start display at page:

Download "Steel Reference materials"

Alfred Goodman
5 years ago
Views:

1 Steel Reference materials 2010

Sample Preparation Machines, accessories and consumables

autofluxer classic now includes new features -

delay The autofluxer classic is still the

flexibility, as 10 programmes can be used to store

Thermo-couples below each crucible monitor the actual

2 Sample Preparation Machines, accessories and consumables The autofluxer TM range The well-known and established autofluxer classic now includes new features - continously moving crucible - start-counter - cooling delay The autofluxer classic is still the easy-to-operate fusion machine, with a small footprint and a very low gas consumption. Using an oxygen-enriched flame it will easily work with high temperature. The innovative and new autofluxer plus shows greater flexibility, as 10 programmes can be used to store different settings for individual applications. Thermo-couples below each crucible monitor the actual temperature of each station to enable the creation of tailored programmes. We offer all necessary Platinum ware, which is compatible to the Schoeps system. On request, moulds and crucibles are available in DPH quality, for a longer use of the Platinum ware. All Borates are available as pure Borates or in a variety of different mixtures - please ask for further details or for your custommix.

HK - sample preparation for metals & powders Disk grinders are

PE-presses: Our presses are available in manual and

We recommend the pressing dies from Chemplex.

offer several sample holders, which can be customised on request.

The HK150 is available as desktop (HK150) or as a stand-alone

A magnetic sample holder is also available as an additional

Moulds: For casting your routine samples, we offer a wide range

for pig iron, cast iron and non-ferrous metals - please ask for

The new HK81F is the next generation of our milling machine

It now contains a Siemens PLC enabling faster milling and more

3 HK - sample preparation for metals & powders Disk grinders are available in two types: HK200-series desktop grinding machines PE-presses: Our presses are available in manual and electro-hydraulic versions. We recommend the pressing dies from Chemplex. HK350 floor-standing unit with built-in exhaust For both, we offer several sample holders, which can be customised on request. For cast iron, a pendulum grinder using a stone is recommended. The HK150 is available as desktop (HK150) or as a stand-alone unit incl. exhaust (HK150exs). A magnetic sample holder is also available as an additional option. Moulds: For casting your routine samples, we offer a wide range of different moulds e.g. for pig iron, cast iron and non-ferrous metals - please ask for details. The new HK81F is the next generation of our milling machine HK80F. It now contains a Siemens PLC enabling faster milling and more security features. The small swing grinder HK40 is available with different types of vessels (including tungsten carbide). Please do not hesitate to contact us for further information: Breitländer GmbH Mercatorstr Wesel Germany Tel. +49 (0) Fax +49 (0) mail@breitlander.com Distributed by: LGC Standards, All rights reserved.

4 Introduction Breitländer Breitländer GmbH have specialised in reference materials since With about international reference materials included in our database, we supply the world s most comprehensive range of metal and associated standards. Our database can search for products containing up to eight selected elements or compounds simultaneously in concentrations from ppm to percentage levels. In our purpose-built facilities in Wesel, Germany, we carry in stock a range of more than 2000 different materials and can fulfil many customer orders with same day supply. In addition to independent advice to help customers select the most appropriate reference material for calibration, control or setting-up, we can advise on correct sample preparation for metals or mineral based materials. Breitländer specialises in the production of XRF-glass-monitor samples, and supply a comprehensive range of sample preparation machines and consumables. Breitländer GmbH has been part of LGC Standards since With LGC Standards we provide the most comprehensive source of reference materials to laboratories across the globe. We work closely with the leading manufacturers to offer laboratories worldwide improved access to reference materials, designed to cover an increasingly large range of parameters, and meet changing market needs. Our global distribution network combined with our extensive experience in supplying reference materials and our technical expertise, enable us to provide fast delivery together with good technical advice. The LGC Group LGC Standards is part of LGC, whose Research and Technology Division acts as the designated UK National Measurement Institute (NMI) for Chemical and Biochemical measurement, and has a long history in the development and validation of analytical methods and the production of reference materials. Many of the analytical methods, which cover the food, environment, industrial, clinical and pharmaceutical sectors, are accredited to ISO/IEC (Requirements for the competency of testing and calibration laboratories). LGC's Research and Technology Division is accredited to ISO Guide 34 (General Requirements for the competence of reference materials producers) for the production of reference materials. LGC offers a range of chemical and bio-analytical laboratory services across a variety of industries including: food and agriculture, environment, life sciences, chemicals and forensic science. LGC also plays a pivotal role in a number of programmes with both government and industry to improve analytical standards and laboratory performance. This catalogue The analytical data in our catalogues are given in mass percent, unless another unit is indicated (ppm, µg/g, mg/kg). These should be considered as typical or pilot values; the actual values are to be found in the certificate supplied with the sample. Values in brackets ( ) are not certified and are listed for information only. Reference materials are often only be produced in small batches to ensure homogeneity, and follow up melts will normally differ both in composition and dimensions. For exact composition of a product, or more information on manufacture, material property, methods, uncertainties etc prior to selection, please contact us. The selection and use of the correct CRM is crucial, and this catalogue aims to assist in the identification of the most appropriate materials. The properties of the materials are given whenever available - essential particularly for solid metals, where the analytical techniques are often structure and surface sensitive. The solid metal samples are therefore marked "wrought, "cast and "chill cast, the latter meaning rapid solidification, generally achieved by casting on a copper block. Aluminium samples in cylindrical form are usually extruded; the flat "mushroom forms are mould cast. If you cannot find a particular material in our catalogues, please contact us, as not all available materials can be included in the listing. New materials can become available and in some cases we can have material custom made. We are in close contact with specialised institutes and companies producing reference materials, as well as with the instrument producers.

5 Choice of reference materials Use of appropriate reference materials is fundamental to the effectiveness of your quality assurance programme. With increasing implementation of quality assurance programmes and laboratory accreditation, growing emphasis is put on use of CRMs whenever available. It is important to ensure that the metrological status of a reference material (as described below) meets your needs, and that their properties match those of your routine samples as closely as possible. They should have similar structure and be prepared in the same way. Calibration should be based on these matrix compatible materials, following the instrument manufacturer s recommended calibration procedures. Analytical results carry uncertainties due to random and systematic errors, but the measured value obtained from a CRM or RM should be within acceptable tolerance for the method used. Terminology Reference materials, CRMs and RMs, have been defined by ISO REMCO (ISOCommittee on Reference Materials). CERTIFIED REFERENCE MATERIAL (CRM): A reference material characterized by a metrologically valid procedure for one or more specified properties, accompanied by a certificate that states the value of the specified property, its associated uncertainty, and a statement of metrological traceability. REFERENCE MATERIAL (RM): Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process SETTING-UP SAMPLES (SUS): Materials of minimum inhomogeneity intended to be used for monitoring or adjustment of the analytical signal of instruments. These materials are given assigned values during calibration with CRMs or RMs, and are supplied with guide values, rather than certified values. Such standards are also referred to as "recalibration samples, "drift control samples or "monitor samples. CHART CONTROL SAMPLES are selected RM-materials with a composition normally corresponding to common alloy grades. These samples are sufficiently well analysed for their intended use of keeping spectrometers within statistical control and are used for quality assurance, to check for calibration and recalibration. Ordering and Payment Orders may be placed by mail, telephone, fax or . All orders for controlled substances must be sent by post, including the orignial import or possession permit. All purchase orders should indicate the number of units required, catalogue numbers and descriptions of the materials together with a purchase number. Adresses for delivery and for invoicing should also be indicated. All prices quoted are in Euro. The prices stated are subject without freight charges and VAT. Unless otherwise specified or agreed, the goods will be send on a EXW (Ex Works) basis (INCOTERMS 2000). All purchase orders within Germany will be delivered without freight charges. For all other destinations we will charge freight that we will quote on request. Handling charges for controlled substances to all destinations will be quoted on request. We reserve the right to change prices or packaging and unit definitions at any time. Payment of all invoices is expected within 30 days of receipt. In some circumstances payment in advance may be requested. Payment should be made by one of the following: Credi card e.g. Visa or Eurocard/Mastercard or wire transfer to: HSBC Trinkaus & Burkhardt P.O.Box , Duesseldorf/Germany BIC (SWIFT-Code): TUBDDEDD Account No.: Bank Code No. : IBAN DE

6 Conditions of sale Breitländer will make every effort to meet requests for urgent orders as quickly as possible. All shipments are made in compliance with existing regulations pertaining to the materials at the time of shipment. All items listed in our catalogue or otherwise offered for sale are subject to availbility and any delivery dates that may be quoted are conditional on supplies from manufacturers. We are unable to accept any liability for delay. The standard terms and conditions of sale of LGC Standards apply. LGC Standards GmbH Mercatorstr Wesel Germany Tel.: +49 (0) Fax: +49 (0) mail@breitlander.com Web:

Content Carbon, Low Alloy Steel 2.1.1-2.1.22 Stahl, unlegiert / niedrig legiert 2.1.1-2.1.22 Stainless Steel, low Ni 2.2.1-2.2.5 Edelstahl, niedrig legiert 2.2.1-2.2.5 Stainless Steel, aust.

7 Content Carbon, Low Alloy Steel Stahl, unlegiert / niedrig legiert Stainless Steel, low Ni Edelstahl, niedrig legiert Stainless Steel, aust. / Edelstahl, aust Stainless Steel, high alloy / Edelstahl, hoch legiert High Speed Steel / Schnellarbeitsstahl Toolsteel / Werkzeugstahl Special Steel / Spezialstahl Fe - Binary Standards / Fe - Binärstandards Pure Iron / Reineisen Steel, Control Chart Samples Stahl, Kontrolproben Steel, SUS / Stahl, SUS

9 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn Si P S Cr Ni Mo V W Cu Al Al(sol) Ti Zr Co B Nb 1 180B (0.003) (0.0001) (0.001) (0.0001) 1 181A A A A (0.01) (0.001) (0.002) A (0.02) (0.001) B (0.002) B A A Ta Sn As Sb Pb Bi N Fe Ø 44x25 mm + 44x13 mm, wrought (0.0000) (0.0002) (0.0000) (0.0028) (99.9) Stahl, unleg/niedr. leg (0.005) (95.48) Carbon/Low Alloy Steel (0.000) (94.60) (0.000) (0.000) (94.49) (0.000) (93.58) (93.63) (0.000) - (0.005) (93.12) (0.007) (92.98) (0.005) (90.53) (0.005) (0.003) (0.004) (90.01) CRM C Mn Si P S Cr Ni Mo V W Cu Al Al(sol) Ti Zr Co B Nb 1 181B B B Ta Sn As Sb Pb Bi N Fe Ø 44x25 mm + 44x13 mm, wrought (0.005) (95.37) Stahl, unleg./niedr. leg (0.000) (94.59) Carbon/Low Alloy Steel (0.000) (0.000) (94.44) Ø 45x30, wrought CRM C Mn Si P S Ni Cr Cu Mo V Ti Co W Al As Sn Nb Fe 1 163E (0.00) (96.9)

10 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C S P Si Mn Cr Ni Cu Mo Ti V Al As B Nb Co 2 A11/ A (0.03) A (0.002) A (0.01) Sn Sb Ø 35x19 mm, cast (<0.001) Stahl, niedr. leg Low Alloy Steel CRM C S P Si Mn Cr Ni Cu Mo Ti V Al As B Nb Sn Pb 2 A (0.004) 2 A (0.012) A (0.02) (0.011) A19/ Sb Co Ø 35x19 mm, cast - - Stahl, niedr. leg. (0.10) Low Alloy Steel (< CRM C Si Mn S P Cu Ni Cr V Ti Mo W Zr Al Ø 35x19 mm, cast 2 B2/ Stahl. niedr. leg. 2 B (0.012) Low Alloy Steel 2 B CRM C S P Si Mn Cr Ni Cu Mo Ti V Co Al As B Nb Sn Ø 35x19mm 2 B Stahl, 2 B niedr.leg 2 B LA-Steel 2 B B (<0.01) (<0.002) (<0.005) (<0.01) (0.01) (0.003) CRM C S P Si Mn Cr Ni Cu Mo Ti V W Co Al B Ø 35x19 mm, cast 2 E (1.1) (1.6) (0.7) 0.18 (0.02) 0.04 (0.007) Stahl, niedr. leg. 2 E23 (1.3) (0.04) (0.01) (0.006) Low Alloy Steel

11 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C S P Si Mn Cr Ni Cu Mo Ti V Al Nb Ø 35x19 mm, cast 2 K (0.02) Kugellagerstahl; Ball Bearing Steel 2 K (0.02) (0.1) Federstahl; Spring Steel 2 K (0.01) (0.01) (0.04) Baustahl; Construction Steel CRM C Mn P S Si Cu Ni Cr B Pb Ag Ti O N H V Mo B (0.0011) (0.0040) (<0.0005) A (0.011) ( ) 0.24 (0.0010) (0.0032) (<0.0005) A ppm <0.2ppm (0.0001) <70ppm <20ppm <5ppm W Co As Sn Al Nb Ta Zr Sb Bi Ca Mg Se Te Zn Au Ce (0.002) (0.0001) (0.0012) (0.001) (0.0005) ( ) (0.008) (0.0080) (0.0009) ( ) (0.001) <1ppm (0.0002) <3ppm (0.0007) - (<0.5ppm) (<0.1ppm) (<0.5ppm) (<0.1ppm) (<0.1ppm) (<0.2ppm) (<0.1ppm) (<0.1ppm) <2ppm (<0.02ppm)(<0.05ppm) La Nd Ø 31x19 mm (0.0004) AISI 94B High C A Späne erhältlich; Chips available (<0.05ppm)(<0.05ppm) Electrolyt. Iron CRM C Si S P Mn Ni Cr Mo Cu Co Sn Al V Ti Nb Zr As N A (0.011) (0.004) (0.006) (0.0002) (0.0004) (0.004) Ta ppm Pb ppm Ag ppm Bi ppm Ca ppm B ppm Sb ppm Mg ppm Te ppm Se ppm Ce ppm W Ø 34x19, wrought Stahl, niedr. leg. (0.012) (20) Low Alloy Steel (0.004) 3 2 (<1) (<1) (30) (35) - - (0.006) 30 5 (<1) (<5) (30) (35) (20) (10) (0.002) (<1) 8 (<1) (3) (<1) (30) , Späne lieferbar; Chips available CRM C Mn P S Si Cu Ni Cr Mo Ca Ø 31x19 mm, wrought (0.03) (0.28) (0.03) (0.008) (2.9) (0.07) (0.04) (0.02) (0.008) Stahl, kalziumbeh.; Steel, Calcium treated CRM C Mn P S Si Cu Ni Cr V Mo Al Ø 31x19 mm, wrought AISI AISI 4130

12 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn P S Si Cu Ni Cr V Mo Co Ti Sn Al As Nb Ø 31x19 mm, wrought (0.003) Low Alloy (0.0008) - (0.028) - - 1% C < % C AISI Low Alloy HSLA Hy Späne lieferbar; Chips available CRM C Mn P S Si Cu Ni Cr V Mo Co Ce Sn Ø 31x19 mm, chill cast 3 C (0.0213) A 242 Mode Stahl, niedr. leg.; Low Alloy Steel CRM C Si Mn P S Cr Mo Ni Al As B Co Cu N Nb Sn Ti V < (0.0005) W Zr 44x19 mm, wrought - (<0.001) Stahl, niedr. leg. - (<0.001) Low Alloy Steel (<0.001) , 112, Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al Cu Nb Ø 38x19 mm, wrought 5 432/ (0.02) 0.14 (0.01) (0.04) <0.002 Kohlenstoffstahl Späne erhältlich 5 433/ (0.01) (<0.01) (0.06) Carbon Steel Chips available 5 434/ (0.01) (<0.01) (0.05) / (<0.01) (<0.01) (0.05) CRM C Si Mn P S Cr Ni Co N Nb Ø 38x19 mm, wrought 5 431/ Kohlenstoffstahl 5 432/ Carbon Steel 5 433/ / / CRM C Si Mn P S Al Al(sol) B Co Nb Pb V Zr Sb Ø 38x19 mm, wrought 5 456/ (0.0013) (0.014) Kohlenstoffstahl Späne lieferbar 5 457/ Carbon Steel Chips available 5 458/ (0.064) / (0.013) (0.074) / (0.019) (<0.0005) (0.0006)

13 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Si Mn P S Cr Mo Ni Al Cu V Co N Ø 38x19 mm, wrought 5 401/ (0.015) Stahl, niedr. leg. Späne lieferbar 5 402/ Low Alloy Steel Chips available 5 403/ (0.010) 5 404/ / (0.009) (0.011) CRM C Si Mn P S Cr Mo Ni Al As Co Cu N Pb V Ø 38x19 mm, wrought 5 406/ Stahl, niedr. leg / Low Alloy Steel 5 408/ / / Späne lieferbar; Chips available CRM C Si Mn P S Al Cr Mo Ni Co Cu V Zr Ø 44x19 mm, cast 5 601/ (0.14) (0.006) (0.03) (0.09) (0.04) (0.002) (<0.005) Kohlenstoffstahl 5 602/ (0.03) (0.004) (0.02) (0.007) (0.06) (0.001) (<0.005) Carbon Steel 5 603/ (0.04) (0.004) (0.03) (0.01) (0.05) (0.001) (<0.005) 5 604/ (0.06) (0.02) (0.09) (0.01) (0.07) (0.001) (<0.005) 5 605/ (0.06) (0.01) (0.05) (0.008) (0.06) (0.001) (0.12) CRM C Si Mn Ni Cr Mo V S Cu Ø 44x19 mm, cast 5 612/ (0.02) (0.06) Stahl, niedr. leg / (0.02) (0.06) Low Alloy Steel 5 615/ (0.02) (0.05) CRM C Si Mn P S Ni Cr Cu Ø 35x30 mm, wrought Kohlenstoffstahl Carbon Steel nur Satz/set only

14 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Si Mn P S Cr Ni Cu Co As Ø 38x45 mm, wrought CI Stahl, niedr. leg.; Low Alloy Steel CRM C Si Mn P S Cr Ni Cu Al Ø 34x34 mm, wrought CM Kohlenstoffstahl CM Carbon Steel CM CM nur Satz/set only CM CM CRM C Si Mn P S Cr Ni Cu Al Mo Ti Ø 38x48 mm, wrought CM Kohlenstoffstahl CM Carbon Steel CM CM nur Satz/set only CM CM CRM C Si Mn P S Ni Cr W V Mo Al Ti Cu Ø 35x35 mm, wrought CM Kohlenstoffstahl CM Carbon Steel CM CM nur Satz/set only CM CM CRM C Mn P S Si Cu Ni Cr Mo V W Ø 33x35 mm, wrought CM Stahl, niedr. leg., hoch SiMn CM Low Alloy Steel, high SiMn CM CM nur Satz/set only

15 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn P S Si Cu Ni Cr Mo Al Al(sol) Ti Ti(sol) V As B B(sol) CI CI CI CI CI (0.0006) (0.005) CI Bi Co Pb Sb Sn W Nb Zr Ca Ce Ø 38x30 mm, wrought (0.0003) < Stahl, niedrig leg < Low Alloy Steel (0.0005) < (0.0001) < nur Satz/set only (0.0006) < (0.0005) < CRM C Si Mn P S Al Al(sol) B B(sol) Ø 35x32 mm, wrought CI Stahl, niedr. leg., niedr. C-hoch Si Low Carbon Silicon Steel CRM C Mn P S Si Cu Ni Cr V Ø 35x50 mm, wrought CM Stahl, niedr. leg. CM Low Alloy Steel CM CM nur Satz/set only CM CM CRM C Mn P S Si Cu Ni Cr Mo Al Ø 32x48 mm, wrought CM Stahl, niedr. leg. CM Low Alloy Steel CM CM nur Satz/set only CM CM

16 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn P S Si Cu Ni Cr Mo V Al Ti W Ca Ø 30x50 mm, wrought CM (0.005) (0.0025) Stahl, niedr. leg. CM (<0.001) (0.0008) Low Alloy Steel CM (0.007) (0.0015) CM (0.001) (0.0027) nur Satz/set only CM (0.011) (0.0004) CRM C Si Mn P S Cr Mo W V B B(sol) Ø 35x25 mm, wrought CI Stahl, niedr. leg. CI Low Alloy Steel CI CI nur Satz/set only CI CRM C Si Mn P S Cr Ni Cu V Ti Mo Al Ø 30x47 mm, wrought CI Stahl, niedr. leg. CI Low Alloy Steel CI CI nur Satz/set only CI CI CRM C Si Mn P S Cr Ni W Mo Al Ti Cu As Sn Pb Sb Ø 36x43 mm, wrought CI Stahl, niedr. leg. CI Low Alloy Steel CI CI CI CI ( )

17 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Si Mn P S Cr Ni Cu V Ti Co Al B W Mo Nb Zr Sb CI CI CI CI 11759a CI 11760a CI CI CI CI CI CI CI CI CI CI CI CI Sn As Pb Ø 37x45 mm, wrought Stahl, niedr. leg Low Alloy Steel

18 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) wrought CRM C Si Mn P S Cu Cr Ni Mo V W Ti Nb Ga Pb Sb Zn Ø 35x35mm EC 179-2D (0.0006) Stahl, niedr. leg. EC Späne lieferbar; Chips available Low Alloy Steel CRM C Si Mn P S Cu Cr Ni Mo Al As N Co V Nb Ø 40x35 mm, wrought EC 193-1D (0.0019) Stahl, niedr.leg Low Alloy Steel CRM C Si Mn P S Ni Cr Mo Co Al Al(sol) Cu N 45x52x31 mm, wrought EC 190-1D Stahl, niedr. leg. EC 192-1D Low Alloy Steel Ø 38x30 mm CRM C Si Mn P S Cr Mo Ni Al As B Cu N Pb V Zn Ø 38x30mm, wrought EC 194-1D Ø 38x35x40 mm EC 195-1D Stahl, niedr. leg. Low Alloy Steel EC Späne lieferbar; Chips available wrought CRM C Si Mn P S Cr Mo Ni Al Al(sol) Cu N Sn Nb Co As Ca Ø 38x30 mm EC 056-2D (<0.001) % C EC 057-2D % C EC 058-2D % S EC 059-2D % C EC 086-1D % C EC 084-1D % C EC 096-2D Ca EC 056-2, EC 057-2, 058-2, 059-2, 084-1, Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al Al(sol) As Co Cu N Nb Pb Sn EC 035-2D EC 085-1D EC 064-1D Ti V Sb Zn Ø 38x30 mm, wrought % C Stahl/Steel Ø 38x25 mm % S Stahl/Steel Nb/Ti Stahl/Steel EC 035-2, Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni V N Nb Ga Pb Sb Zn Ø 38x30 mm, wrought EC 090-1D % C Kohlenstoffstahl Carbon Steel EC Späne lieferbar; Chips available

19 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn Si P S Cr Ni Cu Mo V Ti Nb Al Al(sol) Sn Sb Pb G G G G G (0.005) - (0.029) (0.006) G (0.063) (0.015) (0.0058) G (0.0008) G (0.0014) G (0.049) (0.014) (0.004) G (0.0007) Ca N Ø 40x40 mm Stahl, niedr. leg Low Alloy Steel (0.0002) (0.0002) (0.0002) (0.0002) CRM C Mn Si P S Cr Ni Cu Mo V Al Ø 40x15 mm, wrought G 51/ (0.009) (0.013) - Stahl, niedr. leg. G 52/ (0.009) (0.041) - - Low Alloy Steel G 53/ G 54/ (0.009) (0.034) (0.007) G 55/ (0.009) G 56/ G 57/ G 58/ G 63/ (0.010) G 64/ (0.005) G 65/ G 66/2 (0.041) (0.028) (0.002) (0.004) (0.073) CRM C Mn Si P S Cr Ni Cu Mo V Al Ø 40x15 mm, wrought G 101/ Stahl, niedrig leg. G 102/ Low Alloy Steel CRM C Mn Si S P Ni Cr Sn As B Al Cu Ø 32x28 mm GB (0.0004) Kohlenstoffstahl mit B nur Satz/set only GB Carbon Steel with B GB GB GB GB

20 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn Si S P Ni Cr Cu Ø 30x32 mm GB Lagerstahl GB Bearing Steel GB GB nur Satz/set only GB CRM C Si Mn P S Cr Mo Ni Al As Cu Sn Ti V Sb Co N Ø 35x30-35 mm I (0.008) (0.036) 2.88 (0.012) (0.047) Stahl, I (0.010) (0.040) (0.158) (0.044) (0.076) (0.036) - (0.133) niedr.leg I 1740 (0.246) (0.114) - (0.118) (0.057) LA Steel I 1741 (0.244) (0.102) (0.049) I 1742 (0.243) (0.089) (0.041) I (0.034) 1.50 (0.016) (0.011) (0.011) (0.002) I (0.003) (0.004) I (0.0274) (0.0017) I I Zn= I Mg= I (0.0016) (0.0120) CRM C Si Mn P S Cr Mo Ni Al As Cu Sn V Ø 35x30-35 mm, wrought I Stahl, niedr. leg. I (0.036) (0.02) (0.011) Low Alloy Steel I (0.042) (0.02) (0.008) I (0.020) (0.010) (0.388) (0.014) - (0.025) I (0.018) (0.038) (0.010) (0.010) CRM C Si Mn P S Cr Mo Ni Al As Cu Sn V Ti Al(sol) Al(ins) Ø 35x30-35 mm I (0.060) (0.007) Kohlenstoffstahl I (0.033) (0.006) (0.002) Carbon Steel I (0.031) (0.035) (0.009) (0.020) (0.042) (0.002) I (0.017) I (0.015) (0.0124) (0.0028) I I (0.027) (0.060) - (0.104) (0.0555) (0.0035) I (0.070) (0.028) (0.004) (0.038) I (0.047) I (0.017) (0.042) (0.0013) (0.0008) I (0.039) (0.038) <0.004 (0.039) I (0.047) (0.043) I (0.018) (0.060) (0.043) (0.004) (0.036) I (0.017) (0.007) (0.048) (0.002) (0.002) I (0.013) (0.022) (0.008) (0.001) I (0.026) (0.009) I (0.006) (0.021) (0.0061) (0.029) (0.028) (0.003) (0.013) (0.0085) - - (0.025) (0.0013) 45x52x31 mm I I (0.0005) (0.0026) N= Pb= I (0.0006) (0.0008) (0.0025) N= Co= I (0.0014) Sb= N= Ca=0.0019

21 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) CRM C Mn P S Si Cu Ni Cr Mo Al Co V Nb Ti Sn As N Ø 35x20mm IP Stahl, IP niedr.leg. IP LA-Steel CRM C P S Cr Mo Ø 30-42x15 mm, wrought J Kohlenstoffstahl; Carbon Steel J 24 Späne lieferbar; Chips available RM C Si S P Mn Ni Cr Mo Cu Co Sn Al W V Ti As Ø 40x15 mm, cast T Kohlenstoffstahl U Carbon Steel T (0.003) V S RM C Si S P Mn Ni Cr Mo Cu Co Sn Al W Ti V As Ø 40x15 mm, wrought 4 349B C-Stahl; C-Steel RM C Si S P Mn Ni Cr Mo Cu Sn Al Ti V W As Co Nb Bi 4 352C C Se Sb Zn Ø 42x15 mm, wrought C-Stahl C-Steel RM C Si S P Mn Al V Co Sb B Nb Zr Ø 38x15-20 mm, wrought 4 354A (0.002) Kohlenstoffstahl 4 355A < <0.01 Carbon Steel 4 356A A < <0.001 <0.005

22 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Si S P Mn Ni Cr Mo Cu Co Sn Al V N W P T P R P N N V T Nb As Ta Pb B 40-42x15 mm, cast Stahl, niedr. leg Low Alloy Steel wrought wrought wrought (0.042) chill cast chill cast RM C Si S P Mn Ni Cr Mo Cu Al V W Co N Ø 40x15 mm, wrought 4 LA1A < < Stahl, niedr. leg. 4 LA2C Low Alloy Steel 4 LA3A LA4B LA5A LA6A < <0.01 < RM C Mn P S Si Cu Ni Cr Mo Al N As Co Ca Sn V Ø 35-44x19 mm 6 XCCT E (0.0011) AISI C <0.004 AISI D (0.004) (0.0005) AISI E AISI M < AISI 300M 6 69B (0.024) AISI AMS (0.010) - (0.008) (0.002) AISI E (0.001) AISI 4617

23 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Mn P S Si Cu Ni Cr Mo Al N As Co Ca O Sn V Ø 35-44x19 mm V AISI LF B= (0.002) AISI LF (0.008) (0.002) AISI AISI (0.0002) (0.0026) AISI 3310 RM C Mn P S Si Cu Ni Cr Mo Al As Ca Co N O Sn V Nb 6 XCCS < A (0.0004) 6 57F (0.002) (0.006) (0.0003) (0.007) (0.006) (0.005) (0.002) (0.001) (0.005) (0.001) (0.006) (0.002) (0.0088) (0.0041) (0.009) (<0.002) (0.002) (0.026) C (0.005) Pb Sb Ti B Ø 35-44x19 mm, wrought AISI 1005 Stahl, niedr. leg AISI 1018 Low Alloy Steel AISI AISI LF AISI AISI AISI AISI 1045 (0.001) (<0.004) AISI (0.002) - AISI AISI 1095 RM C Mn P S Si Cu Ni Cr Mo V Al As B Ca Co N O Nb 6 CCS (0.0001) (0.0006) (0.0010) (<0.0005) (0.001) (0.001) Sb Sn Ti W Zr Pb Ta 32-35x32-35x19 mm CRM 38x38x30 mm (<0.002) (<0.002) (<0.002) (<0.003) - - Stahl, niedr. leg (<0.008) Low Alloy Steel

24 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Mn P S Si Cu Ni Cr Mo Al Co Sn V N O Ø 38x19 mm, wrought 6 51F AISI (0.0008) AISI 4620 RM C Mn P S Si Cu Ni Cr Mo Al As Ca Co N O Sn V Ti (0.002) XCCV (0.0018) <0.001 < G (0.0001) (0.002) (0.002) PP (0.0010) A (0.004) (0.0002) C (0.0004) < (0.0008) (0.0052) (0.0005) (0.0007) (0.0008) (0.0091) (0.002) C (0.0014) (0.002) (0.0004) B (0.389) (0.004) (0.0021) A (0.0008) Sb B Nb Pb W Ø 35-44x19 mm, wrought - - (0.004) (0.001) (0.003) AISI 1144 Stahl, niedr. leg AISI 1345 Low Alloy Steel - (0.0001) - - (0.013) AISI E AISI E CRM AISI (0.001) - AISI AISI (0.001) AISI AISI 6418 Ø 57x19 mm AISI < AISI (0.0002) AISI 8620 CRM AISI AISI 8740 CRM AISI AISI NITRADING AISI A AISI A485-1

25 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Mn P S Si Cu Ni Cr Mo Al As B Bi Ca Ce Co Hg 6 13B ( )(<0.0001) (<0.0001) (<0.0005) 0.19 (< ) 6 15A (0.0002) - (0.0005) (0.003) La Mg N O Nb Pb Sb Se Sn Ta Te Ti V W Zn Zr Ø 32x17 mm, ch.cast (<0.0005) ( ) (0.02) ( ) (0.01) Stahl, niedr. leg (0.0003) (0.003) (0.004) Low Alloy Steel RM C Mn P S Si Cu Ni Cr Mo Al Sn V N O Co As Sb (0.0005) A A (0.0038) A (0.003) B (0.004) (0.002) 6 48A (0.002) Ti Nb B W Ø 38x19 mm, wrought F F F F F-5 (0.003) (<0.004) - (<0.002) F F-9 (0.002) (0.0004) F-91 CRM RM C Mn P S Si Cu Ni Cr Mo Al Bi As Ca Co N O Pb Se A (0.0003) (0.0025) (0.001) B (0.002) (0.0002) (0.002) MOD (0.003) A (0.004) (0.001) B (0.0002) MOD (0.001) (0.002) SE (0.002) Sn Ti V Ø 38x12 mm, wrought (0.003) AISI Bi + S (0.002) AISI Bi (0.002) AISI Bi + S (0.002) AISI Bi + S (0.002) AISI Bi AISI E Bi (0.002) AISI Se

26 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) chill cast RM C Mn P S Si Cu Ni Cr Mo Al As B Ca Nb Sn V Ø 32x17 mm 6 CA4A Steel, Ca-behandelt Steel, Ca-treated RM C Mn Si P S Cr Ni Mo V Ti Cu Al Sn W Co Nb As Zr BR ST BR ST BR ST B N Pb Sb Se Ø 45x30 mm (0.001) (0.01) (0.004) Stahl, unleg./niedr. leg (0.0085) (0.001) (0.002) - Carbon/Low Alloy Steel (0.001) (0.007) - RM C Mn Si P S Cr Ni Mo V W Cu Nb Ti Sn As Al Ø 40x25 mm, wrought 7 223/ (0.000) (0.003) (<0.005) (0.000) (<0.1) Stahl, niedr. leg. 7 87/ (0.037) (0.002) (0.007) 0.59 (<0.005) (0.000) (<0.1) Low Alloy Steel 7 243/ (0.002) (<0.01) 0.08 (<0.005) (0.003) (<0.1) RM C Mn P S Si Cu Ni Cr Mo Ø 40x25 mm 8 PV101/ Stahl, niedr. leg. 8 PV102/ Low Alloy Steel

27 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Mn P S Si Cu Ni Cr Mo Sn Al Ø 38x19 mm, wrought AR AISI 1095 Stahl, niedr. leg.; Low Alloy Steel RM C Mn Si P S Cr Ni Mo Cu Co B Zr Ti Al Nb Ta Pb V CT CT CT <0.01 CT <0.01 CT V CT X CT X Sn As Ce W Ø 32x16 mm, wrought (0.037) (<0.005) - Stahl, niedr. leg Low Alloy Steel RM C Mn Si P S Cr Ni Mo Cu W V Al Ø 32x16 mm, wrought CT T-02 Stahl, niedr. leg. CT X T-A6-FM Low Alloy Steel CT X T-A6-FM CT X T-A6-FM CT X T-A6-FM RM C Si Mn P S Cr Mo Ni V N Al As Cu Ø 34x20 mm F 100LA(D) % C HIP F 100LA Späne lieferbar; Chips available

28 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Si Mn P S Cr Mo Ni Al Co Cu Nb Ti V W Pb Sn As SL CRMFeD Zr Ca B Sb Ø 40x40 mm RM C Mn P S Si Cu Ni Cr Mo W Co V Al Sn Pb N O As IA 164A (0.004) (0.002) IA 166A (0.003) (<0.01) (0.004) IA 168A (<0.01) (0.003) IA 169A (0.002) (0.009) IA 170A (0.018) (<0.01) (0.005) IA 172A (<0.01) (0.005) IA 173A (<0.01) (<0.01) IA 180A (0.002) (0.004) Ti Nb B Ø 31x18.75 mm + 31x5 mm (0.0001) Stahl, niedr. leg (0.0002) Low Alloy Steel (0.001) (0.0002) (0.005)

29 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Mn P S Si Cu Ni Cr Mo W Co V Al Sn Pb N O As IA 27D < < IA 28H < IA 209C IA 210C < IA 200B IA 254A (0.001) (0.0003) (0.003) IA 29C (0.002) (0.01) < IA 199B (<0.01) (0.0048) IA 206A (0.019) (0.019) IA 143C (0.001) IA 30F IA 31C (0.01) (<0.01) IA 33D < < IA 49C (<0.005) (<0.001) (0.0012) IA 34B (<0.01)) (<0.01) IA 32C (0.001) IA 182B IA 252C < (0.002) IA 213A (0.007) IA 35F < <0.01 IA 229A (0.003) (0.001) (0.002) IA 36B (<0.01) (0.003) IA 37B (0.0003) IA 38B (0.02) (0.02) Ti Nb B Zr Ca Ø 31x18.75 mm + Ø 31x5 mm < Iron Electrolytic Stahl, unleg./niedr. leg AISI 1018 Carbon/Low Alloy Steel AISI AISI 1040 IA 27D-38B auch als Satz lieferbar: IA CLA20/IA CLA27 Master-Satz von 100 Proben auf Anfrage AISI 1045 also available as set Master Set of 100 pieces on request (0.001) AISI (0.003) (0.003) - - AISI (0.002) AISI (0.002) AISI AISI (0.001) (0.0003) AISI 4140 IA 27D(C)-38B(C) Späne lieferbar 100 g Flaschen AISI 4340 Chips available 100 g bottles <0.002 (0.0003) AISI (0.0001) - - AISI E AISI E (0.001) AISI (0.0005) AISI 86L (0.0001) <0.002 (0.0003) AISI A /4Cr-1/2Mo C1/2 Mo, F (0.0003) /4Cr-1Mo (0.0004) 5Cr-1/2Mo (0.0004) - - 9Cr-1Mo

30 B R E I T L Ä N D E R G M B H Stahl, unleg. / niedr. leg. (Carbon / Low Alloy Steel) RM C Mn P S Si Cu Ni Cr Mo Al(sol) Al(ins) V Ti Co As Sn Ca KW ST < < KW ST KW ST < KW ST < KW ST < KW ST < KW ST < KW ST < KW ST < KW ST < Nb B Pb Sb Zr W Ce Ta Ø 35x18 mm, wrought <0.001 <0.001 <0.001 < <0.001 Stahl. niedr. leg Low Alloy Steel nur Satz/set only

31 B R E I T L Ä N D E R G M B H Edelstahl, niedr. Ni (Stainless Steel, low Ni) CRM C S P Si Mn Cr Ni Cu Ti W Fe Ø 30x18 mm, cast 2 H (0.003) (0.05) 0.50 (82.0) Stahl, warmfest 2 H (0.003) (76.3) SS-Steel, heat resistant 2 H (0.12) (79.3) 2 H (89.0) CRM C S P Si Mn Cr Cu Al Ø 30x20 mm, cast 2 K (0.18) 1.53 Stahl, warmfest; Steel, heat resistant CRM C Mn P S Si Cu Ni Cr V Mo N Ø 31x19 mm, wrought AISI 431 Edelstahl, niedr. Ni Späne lieferbar (0.05) AISI 416 Stainless Steel, low Ni Chips available CRM C Si Mn P S Cr Mo Ni Co Cu V Ø 38x19 mm, wrought (0.01) (0.02) (0.02) Edelstahl, niedr. Ni Späne lieferbar (0.02) (0.02) (0.02) Stainless Steel, low Ni Chips available (0.02) (0.02) (0.03) (0.02) (0.02) (0.02) (0.06) (0.01) (0.02) (0.02) CRM C Si Mn P S Cr Ni Ø 44x13 mm, wrought Edelstahl, niedr. Ni; Stainless Steel, low Ni CRM C Mn P S Si Cu Ni Cr Mo Co Ti Ø 32x30 mm, wrought CI Edelstahl, niedr. Ni CI Stainless Steel, low Ni CI CI nur Satz/set only CI CRM C Mn P S Si Cu Ni Cr V Mo W Co Ti Al Ø 35x58 mm, wrought CM (0.033) (<0.001) (<0.001) (0.012) (0.010) (0.004) (0.005) Edelstahl, niedr. Ni CM (0.090) (0.001) (0.016) (0.016) (0.016) (0.008) (0.010) Stainless Steel, low Ni CM (0.095) (<0.001) (0.015) (0.016) (0.015) (0.10) (0.013) CM (0.089) (0.003) (0.015) (0.013) (0.014) (0.002) (0.002) nur Satz/set only CM (0.094) (0.001) (0.015) ( (0.014) (0.010) (0.017) CRM C Mn P S Si Cu Ni Cr Mo W V Ti Co Ø 33x33 mm, wrought CM Edelstahl, niedr. Ni CM Stainless Steel, low Ni CM CM nur Satz/set only CM

32 B R E I T L Ä N D E R G M B H Edelstahl, niedr. Ni (Stainless Steel, low Ni) CRM C Si Mn P S Cr Mo Ni Al Co Cu V Nb N Pb Sn Ø 35x30 mm, wrought EC 291-1D (0.006) Edelst., niedr. Ni EC 296-1D Stainless Steel, EC 276-2D low Ni EC 291-1, Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al Co Cu V Nb N As B Ti EC 272-1D Sb Ca Zn Ø 38x30 mm, wrought Edelstahl, niedr. Ni; SS-Steel, low Ni EC Späne lieferbar; Chips available CRM C Mn Si P S Cr Ni W V Mo Ti Cu Nb Al As Co Ø 40x12 mm, wrought HB MW Edelstahl, niedr. Ni HB MW (0.017) SS, low Ni HB MW (0.013) HB MW HB MW HB MW (0.024) HB MW HB MW (0.02) HB MW HB MW (0.030) CRM C Si Mn P S Cr Mo Ni Co Cu V Ø 35x30-35 mm, wrought I (0.026) Edelstahl, niedr. Ni I Stainless Steel, low Ni RM C Si S P Mn Ni Cr Mo Cu Co Nb V N Ø 40x15 mm, cast R Edelstahl, niedr. Ni U Stainless Steel, low Ni W T N RM C Si S P Mn Ni Cr Mo Cu Co Nb N V Sn Ø 40x15 mm, cast L AISI 414 Edelstahl, niedr. Ni L wrought Stainless Steel, low Ni K RM C Si S P Mn Ni Cr Mo Cu V Ti As Al B N Ø 40x15 mm, chill cast LC (0.004) Edelstahl; SS-Steel, low Ni

33 B R E I T L Ä N D E R G M B H Edelstahl, niedr. Ni (Stainless Steel, low Ni) RM C Si S P Mn Ni Cr Mo Cu Sn V Ti As Al B N Ø 40x15 mm A < (0.001) (0.040) Edelstahl,niedr. Ni A (0.0008) SS-Steel, low Ni A < RM C Si S P Mn Ni Cr Mo Cu Co Sn Al Nb V N O (0.002) 6 410A (0.011) (0.004) (0.003) B (0.021) (0.001) (0.004) 6 SS SS (0.003) E (0.002) (0.004) B (0.002) (0.006) E C Ti W Ca As Ø 38-45x12 mm, wrought (0.008) AISI 410 Edelstahl, niedr. Ni CRM AISI 410 Stainless Steel, low Ni (0.003) AISI 410 (0.003) (0.005) (0.0002) (0.004) AISI 410 CRM AISI AISI AISI AISI AISI (0.0009) - AISI AISI 440C AISI 446 RM C Mn P S Si Cu Ni Cr Mo Sn Al V Co Nb W B Mn (0.001) (0.004) F F (0.006) (0.002) < (0.005) (0.002) (0.01) N O Ø 35-45x12 mm, wrought AISI 182FM Edelstahl, niedr. Ni, Rückschwefelung AISI 203 Stainless Steel, low Ni, resulphurized AISI AISI AISI 420F AISI 430F AISI 430F AISI 440F

34 B R E I T L Ä N D E R G M B H Edelstahl, niedr. Ni (Stainless Steel, low Ni) RM C Mn P S Si Cu Ni Cr Mo V Co N Ti W Al B Se (<0.003) (0.002) (<0.002) (0.007) (0.0002) - Nb O Sn Ø 31-40x12 mm AISI 416SE Edelstahl, niedr. Ni (0.004) AISI 440FSE Stainless Steel, low Ni (0.002) (0.0020) (0.007) - RM C Mn P S Si Cu Ni Cr Mo Co Al(sol) Al(ins) Ti As Nb Ø 35x18 mm, wrought KW ST Edelstahl, niedr. Ni KW ST Stainless Steel, low Ni KW ST KW ST nur Satz/set only KW ST < < KW ST < < KW ST < <0.001 <0.001 KW ST < <0.001 <0.001 RM C Mn Si P S Cr Ni Mo Cu Co Al Ti V N Sn Ag Ø 32x16 mm, wrought CT AISI 409 CT AISI 410 CT AISI 416 CT AISI 431 CT T AISI 446 RM C Mn Si P S Cr Ni Mo Cu Co Nb Sn N Ø 32x16 mm, wrought CT T-431 Edelstahl, niedr. Ni CT X17556P XM-28 Stainless Steel, low Ni CT X T-410M CT X Al= T-410, C CT X T-410CB CT X T-410CB CT X T-431 CT X T-410CB CT X T 410CB CT X T-410CB CT T-440FM

35 B R E I T L Ä N D E R G M B H Edelstahl, niedr. Ni (Stainless Steel, low Ni) RM Al B C Co Cr Cu Mn Mo N Nb Ni O P S Si Sn IA 9C (0.0003) IA 10C < IA 154B (0.001) IA 205B IA 11C < IA 12B (0.003) (0.0003) IA 13C < (0.004) IA 14B (0.0004) IA 20C (0.004) Ti V W Zr As Ø 31x18.5 mm + 31x5 mm (0.001) - AISI 410 Edelstahl, niedr. Ni (0.001) - AISI 416 Stainless Steel, low Ni AISI AISI 422 < <0.005 < AISI AISI <0.005 < AISI 440C IA 9C(C) - 20C(C) Späne lieferbar 100 g AISI 446 Chips available (0.003) Greek Ascoloy Manganstähle, Automatenstähle mit Pb + S, Dynamostähle und Nitrierstähle, siehe unter Abschnitt 2.5. Spezialstahl Manganese Steels, Free Cutting Steels, Resulphurized Steels, Dynamo Steels and Cementation Steels, see part 2.5. Special Steel

37 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) CRM C S P Si Mn Cr Ni Cu Mo Ti Nb Fe Ø 30x20 mm, cast 2 S (1.90) (61.0) Edelstahl, aust. 2 S (0.02) (74.0) Stainless Steel, aust. CRM C Si Mn S P Cu Ni Cr Ti Mo Nb Fe Ø 35x20 mm, cast 2 S (76.1) Edelstahl, aust. 2 S (0.01) (71.5) Stainless Steel, aust. 2 S (67.1) 2 S (0.02) (68.8) 2 S (75.6) 2 S (64.7) 2 S (73.1) CRM C S P Si Mn Cr Ni Cu Mo Nb Ti Ø 35x20 mm, cast 2 K Edelstahl, aust. 2 K10/C Stainless Steel, aust. CRM C Mn P S Si Cu Ni Cr V Mo Co Pb Ø 31x19 mm, chill cast 3 C1151a Edelstahl, aust. 3 C1153a Stainless Steel, aust. 3 C1154a CRM C Mn P S Si Cu Ni Cr V Mo Co Ti Nb Ta Pb Ø 31x19 mm (0.001) AISI 316 Edelstahl, aust (0.019) (0.013) AISI 321 Stainless Steel, < AISI 348 aust , Späne lieferbar; Chips available

38 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) CRM C Mn P S Si Cu Ni Cr Mo Co Nb W B V Ø 31x19mm, chill cast 3 C (0.1) (0.0004) ACI-CD-4M-CU Edelstahl, hoch leg. 3 C (0.002) (0.18) (0.0004) PH Stainless Steel, CRM C Mn P S Si Cu Ni Cr V Mo Co Fe Ø 31x19mm Ni36 Edelstahl, aust Ni48Fe51 Stainless Steel, aust Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al As Co Cu Nb Pb Sn Ti 5 461/ (0.002) (0.004) / / / (0.003) / / (0.002) (0.001) (<0.001) (<0.001) (<0.002) 5 467/ / V Ta B N Ø 38x19 mm, wrought Edelstahl. aust Stainless Steel, aust /1-468/1 Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al As Co Cu Nb Sn V Ø 38x19 mm, wrought (0.006) (0.02) Edelstahl, aust Stainless Steel, aust Späne lieferbar; Chips available CRM C Si Mn P S Ni Cr Mo Cu Co Nb N Ø 35x30mm, wrought Edelstahl, aust Stainless Steel, aust , 653, Späne lieferbar Chips available nur Satz/set only

39 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) CRM C Si P S Mn Cu Ni Cr Mo W Al Ti Co Sn Pb As V Nb CI CI CI CI CI Sb B Bi Zn Ø 40x30 mm, wrought Edelstahl Stainless Steel nur Satz/set only CRM C Mn P S Si Cu Ni Cr Mo W Al(ins) Al(sol) Ti Sn As N Ø 38x40 mm, wrought CI Edelstahl CI Stainless Steel CI CI nur Satz/set only CI CI CI CRM C Si Mn P S Cr Mo Ni Al As B Co Cu N Sn Ti EC 284-2D V O Ø 38x35 mm, wrought (0.0099) Edelstahl; Stainless Steel EC Späne erhältlich; Chips available - O zertifiziert/certified CRM C Si Mn P S Cr Mo Ni Al As B Co V Ti Sn N EC 289-1D (0.006) EC 295-1D Cu Sb Mg Fe Ø 35-38x30 mm, wrought Edelstahl, hoch Ti; Stainless Steel, high Ti (0.0003) % MoCrNi-Stahl; Steel EC Späne lieferbar; Chips available

40 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) CRM C Si Mn P S Cr Mo Ni B Co Cu N Nb As Ti V Ø 36x25 mm, wrought EC 297-1D Al= Radionox EC 287-1D Edelstahl/SS EC 292-1D (0.0003) Ø 38x30 mm EC Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al B Co Cu Fe N Pb Ti V Ø 38x25mm EC 298-1D Duplex EC Späne lieferbar; Chips available CRM C Mn Si P S Cr Ni Cu Mo V W Ti Nb B Zr Co Ø 40x12 mm, wrought HB MW (0.012) Edelstahl, aust HB MW Stainl. Steel, aust. HB MW HB MW HB MW HB MW HB MW HB MW HB MW (0.01) CRM C Mn Si P S Cr Ni Al Ti W Mo Ø 40x12 mm, wrought HB MW Edelstahl, aust. HB MW (0.011) Stainless Steel, aust. HB MW (0.015) CRM C Si Mn P S Cr Mo Ni Co Cu V N Ti Al 45x52x31 mm, wrought I Edelstahl, aust. I (0.021) Stainless Steel, aust. I (0.025) (0.004) I (0.0033) CRM C Si Mn P S Cr Mo Ni Co Cu V N Ti Al Sn As I (0.005) W Sn As Ca Sb Ø 35x30-35 mm, wrought Edelstahl, aust.; Stainless Steel, aust. CRM C Mn Si P S Cr Ni Cu Mo V Ti Al W N Co Ø 40x40 mm G Edelstahl G Stainless Steel G (0.20) (0.095) - - G (0.032) (0.034) - - (0.033) G G G G G (0.015) G (0.040) - - -

41 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) CRM C Si Mn P S Cr Ni Mo N Co Sn B Ca V Pb Ø 37x20 mm, wrought J 27AD Edelstahl Stainless Steel J 27A Späne lieferbar; Chips available RM C Si S P Mn Ni Cr Mo Cu Co W Ti Ta B Sb J K Zr Bi Ø 40x15 mm, cast (0.007) AISI316 Edelstahl <0.01 <0.005 Stainless Steel RM C Si S P Mn Ni Cr Mo Cu Co Nb W Al Ti J P Q (0.013) (0.018) K (0.016) N (0.004) (0.005) J V N Cd Ø 40-43x15-20 mm Edelstahl Stainless Steel cast RM C Si S P Mn Ni Cr Mo Cu Co Al Ti Ta Sn B N V Ø 40x15 mm Y (0.17) (0.03) (0.01) (0.014) - Edelstahl T SS-Steel BC R S (0.011) (0.15) ch-cast RM C Si S P Mn Ni Cr Mo Cu Nb N V As Co B Ø 40-43x15-20 mm, cast 4 PH1M (0.006) PH Edelstahl 4 PH2K (0.013) FV 520 Stainless Steel 4 PH3L PH4M (0.0037) chill cast 4 PH5J PH6E PH7E

42 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) RM C Si S P Mn Ni Cr Mo Cu Co Nb N B Sn Al Ø 40x15mm, cast B Edelstahl, aust D (0.0024) (0.0046) Stainless Steel, aust A A B A B B A A B B RM C Mn P S Si Cu Ni Cr Mo Nb N V Co Ta B Ø 36-44x12 mm, wrought PHA (0.002) Edelstahl, hoch leg PHB (0.002) Stainless Steel RM C Mn P S Si Cu Ni Cr Mo Sn Al V Nb W B Co Ti 6 CA CA (0.0007) CA N O Ca Ø 35-45x12 mm, wrought AISI 304L Edelstahl, aust., Ca-behandelt AISI 304L Stainless Steel, aust., Ca-treated AISI 304L RM C Mn P S Si Cu Ni Cr Mo Sn Al V Nb W B Co Ti 6 316A (0.003) 6 316B (0.002) 6 CA CA CA CA (0.012) (0.008) (0.0004) 0.24 (0.036) 6 SS (0.0006) 0.16 (0.002) 6 SS (0.0005) N O Ca Ø 35-45x12 mm, wrought AISI 316 Edelstahl. aust., Ca-behandelt AISI 316 Stainless Steel, aust., Ca-treated AISI 316L AISI 316L AISI 316L AISI 316L AISI 304L AISI 304L

43 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high leg.) RM C Mn P S Si Cu Ni Cr Mo Al B Ca Co O N Nb Sn Ti 6 81P (0.003) (0.0004) 0.21 (0.0064) N (0.0006) < V C T (0.0003) (0.005) J (0.002) (0.002) V W As Ø 35-45x12 mm, wrought AISI 304L Edelstahl AISI 304L Stainless Steel AISI 304+N AISI AISI AISI AISI 316L RM C Mn P S Si Cu Ni Cr Mo Sn Al V Co Ti Nb W B 6 82D (0.002) E F (0.006) - (0.04) 0.19 (0.008) 0.11 (0.08) < (0.002) (0.002) (0.002) L (0.005) D (0.006) A (0.0005) 6 321C (0.03) (0.0005) 6 86F (0.007) (0.006) 0.19 (0.03) F A (0.002) (0.002) 0.79 (0.03) (0.0004) 6 347B (0.002) 0.71 (0.005) O N Ca As Pb Sb Ta Ø 35-45x12 mm, wrought AISI 309 Edelstahl AISI 309 Stainless Steel AISI 310 (0.011) (0.0002) (0.003) (0.001) (0.006) - AISI 310 CRM (0.0044) (0.002) AISI 310 CRM (0.0058) (0.0003) (0.010) AISI 317L CRM (0.0023) (0.004) AISI 317L CRM (0.001) - (0.003) AISI 317L AISI (0.0002) (0.006) - - (0.002) AISI 321 (0.0011) (0.0001) (0.004) AISI (0.001) (0.003) (0.001) - - AISI RA AISI (0.0002) (0.003) - - (<0.004) AISI (0.0002) (0.003) - - (<0.004) AISI 347

44 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) RM C Mn P S Si Cu Ni Cr Mo Ti Ø 40x25 mm 8 PV111/ AISI 304L 8 PV112/ AISI 316Ti RM C Mn P S Si Cu Ni Cr Mo W Co V Nb Al Ti Ca B (0.002) (0.005) (0.0003) (0.003) (0.003) (0.0003) 6 95A (0.003) A (0.0017) 6 SS (0.01) SS (<0.02) (0.015) N O As Ø 31-50x12 mm, wrought (0.007) (0.005) Custom 450 CRM (0.0060) (0.003) Custom 450 CRM Custom Custom (0.002) Custom (0.001) Custom 455 RM C Mn P S Si Cu Ni Cr Mo W Co V Nb Al Sn N Ca < < A A (0.006) 1.00 (0.002) (0.0003) 6 185A (0.014) (0.01) (0.0001) (0.020) A < (0.0006) 6 186A < <0.002 (0.001) (0.002) A (0.009) C < A Ti Se B Ce Ø 35-41x12 mm, wrought MA (0.003) - (0.0004) (<0.0005) - Greek Asc PH13-8Mo (0.001) PH (0.001) VAR 15Cr-5Ni (0.001) Cr-5Ni (0.0003) PH < Invar 36 (0.002) (0.025) Carp. 20Cb3 (0.001) - (0.0019) - Alloy A 286

45 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high leg.) RM C Mn Si P S Cr Ni Mo V W Co Cu Nb Ti Sn Ø 40x25 mm, wrought (0.08) (0.06) Edelstahl: SS, aust. RM C Mn Si P S Cr Ni Mo Cu Co V W Nb Sn Ag CT CT CT CT CT Pb Se Al Ti Ø 32x16 mm, wrought AISI 303 < AISI AISI AISI x36x24 mm AISI 316 RM C Mn Si P S Cr Ni Mo Cu Co V W Nb Sn Ag CT CT Pb Al Ti B Ø 32x16 mm, wrought AISI 304M AISI 316M RM C Mn Si P S Cr Ni Mo Cu Co V N Nb Sn Ag Pb CT CT <0.001 CT 123A < < CT CT 20CB B Ti Se Ø 32x16 mm, wrought Custom Custom Custom 465 CRM Custom CB-3

46 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) RM C Mn Si P S Cr Ni Mo Cu Co V Ti Nb B Sn N Ø 32x16mm CT T-304 CT V Cust 455 CT V Cust 455 CT X CT 9.5 CT X T-305 CT X T-304HN CT X T-305 CT X T-305 CT X T-316 CT X < Al= MO RM C Si Mn P S Cr Mo Ni Co Cu N Nb V Ø 38x20 mm F 500HA(D) Edelstahl, HIP F 501HA(D) Stainless Steel, HIP F 500HA + 501HA Späne lieferbar; Chips available RM Al B C Co Cr Cu Mn Mo N Nb Ni O P S Si Sn IA 241C IA 234B (0.002) IA 21C IA 22B (0.0007) IA 23C IA 152B IA 212B IA 25C IA 26B IA 157B IA 100C 0.35 (0.002) IA 239A <0.01 IA 24B (0.001) < IA 99B (0.005) (0.003) Ti V W Ta Se Zr Fe Ø 31x18.5 mm + 31x5 mm (0.005) AISI 302 Edelstahl (0.002) (0.003) (0.004) AISI 302HQ Stainless Steel (0.01) (0.001) PH Mo (0.010) PH < PH < PH < < Duplex 2205 IA 241C-99B Späne lieferbar 100 g (0.004) Mg=0.002 (0.002) Cb3 Chips available A < AL6XN Haynes Ferralium <0.005 <0.04 < < Invar Maraging 300

47 B R E I T L Ä N D E R G M B H Edelstahl (Stainless Steel) RM Al B C Co Cr Cu Mn Mo N Nb Ni O P S Se Si Sn IA 1C (0.0004) IA 253A IA 2F IA 162B IA 3C IA 4C IA 5D (0.0005) (0.004) IA 163C IA 153B IA 6C IA 7B (0.001) IA 8C IA 154A (0.0068) IA 205B As= IA 15B IA 16B (0.0018) IA 19B IA 17B (0.003) IA 18B (0.002) Ti V W Ø 31x18.5 mm + 31x5 mm AISI 303 Edelstahl IA SHTS30-30 AISI Typproben als Satz erhältlich AISI 303Se Stainless Steel 30 AISI pre-selected samples available as set AISI AISI 304L AISI AISI AISI 316 < AISI 316L AISI 317L AISI 321 (0.005) (0.031) AISI 330 IA 1C(C) - 18B(C) Späne lieferbar 100 g AISI 347 Chips available AISI AISI Custom Custom Nitronic 40 (0.002) Nitronic Nitronic 60

48 B R E I T L Ä N D E R G M B H Edelstahl, aust. (Stainless Steel, aust.) Edelstahl, hoch leg. (Stainless Steel, high alloy) wrought RM C Si Mn P S Cu Al(sol) Al(ins) Ni Cr Mo Ti Co As Nb Pb Ta Ø 35x18mm KW ST Edelst., KW ST aust. KW ST < S.Steel, KW ST aust. KW ST KW ST nur Satz/ KW ST set only KW ST RM C Mn Si P S Cr Ni Cu V Mo Nb W Ti Al Co As Sb Sn SK S (0.026) (0.04) (0.01) (0.01) SK S (0.00) (0.01) (0.028) SK S (0.01) 0.79 (0.00) (0.02) (0.00) (0.01) (0.006) SK S (0.02) (0.00) (0.01) (0.005) (0.01) (0.013) (0.003) SK S (0.00) (0.01) (0.007) (0.003) (0.006) SK S (0.00) (0.01) (0.007) (0.006) SK S (0.03) (0.01) 0.60 (0.000) (0.01) (0.019) (0.002) (0.007) SK S (0.03) SK S (0.00) 0.02 (0.01) (0.01) SK S (0.02) (0.01) (0.005) (0.001) (0.006) SK S (0.19) (0.11) (0.002) SK S (0.00) (0.005) (0.001) (0.025) Zn Pb Bi B Ø 40x15 mm, wrought Edelstahl, aust. (0.001) (0.000) Stainless Steel, aust (0.000) (0.000) (0.001) (0.000) (0.001) (0.000) (0.000) (0.000) (0.001) (0.000) (0.000) (0.000) (0.001) (0.000) (0.002) (0.003) (0.001) (0.002) (0.003) (0.001) - RM C Mn Si P S Cr Ni Cu Mo V Ti W Nb As Sn Sb Co Al SK V (0.01) (0.04) SK V (0.01) (0.04) Pb Bi Zn Ø 30x30 mm, wrought Edelstahl, aust Stainless Steel Manganstähle, Automatenstähle mit Pb + S Dynamostähle und Nitrierstähle, siehe unter Abschnitt 2.5. Spezialstahl Manganese Steels, Free Cutting Steels, Resulphurized Steels, Dynamo Steels and Cementation Steels, see part 2.5. Special Steel

49 B R E I T L Ä N D E R G M B H Schnellarbeitsstahl (High Speed Steel) Werkzeugstahl (Toolsteel) CRM C S P Si Mn Cr Ni Cu Mo Ø 35x19 mm, cast 2 K (0.02) Werkzeugstahl; Toolsteel CRM C Mn P S Si Cu Ni Cr V Mo W Co Ø 31x19 mm AISI M2 Werkzeugstahl; Toolsteel CRM C Si Mn P S Cr Mo Ni Al Co Sn V W Ø 38x19 mm, wrought 5 481/ (0.09) Schnellarbeitsstahl Späne lieferbar 5 482/ (0.16) High Speed Steel Chips available 5 483/ (0.08) / (0.14) (0.006) / (0.06) (0.005) / (0.14) (0.006) CRM C Si Mn P S Mo V W Ø 38x19 mm, wrought (0.049) (0.07) (0.11) (0.012) (0.027) (0.028) (<0.02) 0.52 Werkzeugstahl Späne lieferbar (0.036) (0.06) (0.09) (0.015) (0.025) (0.033) (<0.02) 1.28 Tool Steel Chips available (0.030) (0.05) (0.07) (0.017) (0.027) (0.027) (<0.02) (0.024) (0.05) (0.09) (0.02) (0.024) (0.036) (<0.02) 3.02 nur Satz/set only CRM C Si Mn P S Cu Ni Cr Mo W V Co N Ø 35x30 mm, wrought Schnellarbeitsstahl Späne lieferbar High Speed Steel Chips available nur Satz/set only CRM C Si Mn P S Ni Cr Mo Cu W V Ø 35x30mm, wrought (0.009) Werkzeugstahl Toolsteel nur Satz/set only (0.012) (0.004) (0.007) CRM C Si Mn P S Cr Ni W Cu V Ø 35x50 mm CI Werkzeugstahl CI Tool Steel CI CI nur Satz/set only CI

50 B R E I T L Ä N D E R G M B H Schnellarbeitsstahl (High Speed Steel) Werkzeugstahl (Toolsteel) CRM C Si Mn P S Cr Ni W Mo Cu Ø 30x60 mm, wrought CI Werkzeugstahl CI Tool Steel CI CI nur Satz/set only CI CRM C Mn P S Si Cu Ni Cr Mo W V Al Ø 35x50 mm, wrought CM (0.10) (0.022) (0.22) Werkzeugstahl CM (0.10) (0.021) (0.17) Toolsteel CM (0.09) (0.020) (0.28) CM (0.09) (0.015) (0.26) nur Satz/set only CM (0.10) (0.009) (0.08) CRM C Mn P S Si Ni Cr Mo W V Ø 35x25 mm, wrought CM Werkzeugstahl CM Toolsteel CM CM nur Satz/set only CM CM CRM C Mn P S Si Cu Ni Cr Mo W V Al N Ø 35x35 mm CI Schnellarbeitsstahl CI High Speed Steel CI CI nur Satz/set only CI CI CRM C Mn P S Si Ni Cr V W Mo Ø 35x35 mm, wrought CI Schnellarbeitsstahl CI High Speed Steel CI CI nur Satz/set only CI CRM C Si Mn P S Cr Ni Cu Mo W V Al 35x30 mm, wrought CI Schnellarbeitsstahl CI High Speed Steel CI CI nur Satz/set only CI CI CI CI

51 B R E I T L Ä N D E R G M B H Schnellarbeitsstahl (High Speed Steel) Werkzeugstahl (Toolsteel) CRM C Si Mn P S Cu Cr Ni Mo V W Co As Ti Al EC 288-1D EC 271-1D Sb Sn N Ø 36x25 mm Werkzeugstahl Toolsteel EC EC 271 Späne lieferbar; Chips available CRM C Mn Si P S Cr Ni Cu Mo V Ti Al Nb Ø 40x15 mm wrought G Werkzeugstahl G Toolsteel G G G G G (0.01) CRM C Mn Si P S Cr Ni Cu Mo V Ti Al W N Co Nb Sn Ø 40x40 mm G (0.002) (0.016) (0.020) 0.13 (0.003) Werkzeug- G (0.003) (0.025) (0.003) stahl G (0.002) Toolsteel G (0.025) (0.0035) G (0.002) (0.018) (0.021) G (0.0035) (0.005) - (0.056) (0.019) G (0.016) (0.0045) G (0.002) 0.11 (0.19) (0.022) G (0.001) G (0.002) G (0.002) (0.013) G (0.001) G (0.019) (0.013) G (0.058) (0.015) (0.010) G (0.017) G G (0.023) (0.004) wrought RM C Si S P Mn Ni Cr Mo Cu Co W V N Sn Pb As Sn Ø 40x15 mm 4 HS1C (0.035) SA-Stahl 4 HS2C SS-Steel 4 HS3L chill cast 4 HS9A HIP RM C Si S P Mn Ni Cr Mo Cu Co W V Ø 40x15 mm cast K (0.012) Schnellarbeitsstahl K High Speed Steel

52 B R E I T L Ä N D E R G M B H Schnellarbeitsstahl (High Speed Steel) Werkzeugstahl (Toolsteel) RM C Si S P Mn Ni Cr Mo Cu Co W V Ø 40x15 mm, cast D Schnellarbeitsstahl D High Speed Steel D D D RM C Mn P S Si Cu Ni Cr Mo Al W V Co As N O Ti < D D E H (0.356) (0.002) 6 35D (0.005) D C B (0.01) (0.02) B (0.0015) A (<0.003) (0.003) TS M (0.002) (0.004) 6 A <0.005 (0.004) (0.010) V < Sn Pb Nb Ø 38-41x12 mm, wrought AISI Werkzeugstahl AISI M 2 Tool Steel AISI S AISI S AISI H AISI O AISI A AISI S AISI L AISI A (<0.002) AISI O AISI S (0.004) AISI M AISI A HIP-Technol HIP-Technol. RM C Mn Si P S Cr Ni Mo V W Co Cu Ø 40x25 mm, wrought (0.006) (<0.01) 4.20 (<0.05) 0.07 Werkzeugstahl/Schnellarbeitsstahl (0.008) Tool Steel/High Speed Steel (0.015) (<0.05) 0.15

53 B R E I T L Ä N D E R - G M B H Schnellarbeitsstahl (High Speed Steel) Werkzeugstahl (Toolsteel) RM C Mn Si P S Cr Ni Mo Cu Co V W Ø 32x16 mm, wrought CT M Werkzeugstahl/Schnellarbeitsstahl CT M Toolsteel/High Speed Steel CT M CT M <0.05 Probenbezeichnung kennzeichnet AISI-Type CT D <0.01 Sample number indicates AISI-Type CT H CT A CT O CT X F2 CT X F2 RM Al B C Co Cr Cu Mn Mo N Nb Ni O P S Si Sn IA 39B IA 40B (0.006) (0.0010) (0.0014) IA 41B (12.51) (0.0024) IA 42B (0.0005) IA 43B IA 44B (0.008) IA 45B (0.0001) IA 46B IA 47B (<0.001) (0.002) (0.0014) IA 48B (0.006) (0.040) (0.0125) (0.009) Ti V W As Ø 31x18.5 mm + 31x5 mm (0.026) - AISI A2 Werkzeugstahl als Satz erhältlich: IA TS AISI A6 Tool Steel available as set (0.022) - AISI D AISI H < AISI L AISI M (0.004) AISI O6 IA 39B(C) - 48B(C) Späne erhältlich 100 g (0.01) AISI S1 Chips available (0.016) - AISI S5 (0.004) 1.12 (17.26) - AISI T1

55 B R E I T L Ä N D E R G M B H Spezialstahl (Special Steel) CRM C Si Mn P S Cr Ni Al As Co Cu N Sn Ti V Ca Zn Ø 30x25mm 8 TL TRIP 800 CRM C Mn P S Si Cr Mo Ni Al Co Cu N V Ø 50x10 mm, cast 5 491/ (0.04) Stahl, hoch Mn 5 494/ (0.43) (0.025) Steel, high Mn 5 495/ CRM C Si Mn P S Cr Mo Ni As Co Cu N V Ø 40x20 mm EC 294-1D Mn-Stahl; Mn-Steel CRM C Mn P S Si Cr Ni V Ti Mo Nb Ø 32x42 mm, wrought CI Stahl, hoch Mn CI Steel, high Mn CI CI nur Satz/set omly CI CI CRM C Mn P S Si Cr Ni Mo Cu Co W V Ti Al Nb Sn N Ø 35x35x20mm CT 035A < Stahl, CT 129A < hoch Mn Steel, high Mn RM C Mn P S Si Cu Ni Cr Mo Co Ti Al B N Nb O Sn (0.0007) (0.006) (0.006) 6 180A (0.002) (0.0023) (0.002) (0.002) (0.0006) (0.006) 6 203MN (0.002) (0.001) (0.0010) (0.004) A (0.004) (0.004) (0.003) (0.004) V W Ta Ca Ø 32-41x12 mm, wrought Stahl, hoch Mn Nitronic 50 Steel, high Mn Nitronic Cr6Ni9Mn (0.007) Mn18Cr RM C Mn P S Si Cu Ni Cr Mo Al Co N Nb Sn V Ø 32x17 mm, cast 6 17A Stahl, hoch Mn 6 18A Steel, high Mn 6 19A

56 B R E I T L Ä N D E R G M B H Spezialstahl (Special Steel) RM C Mn Si S P Ni Cr Mo Cu Al V Sn N Nb Ø 40x17 mm, chill cast 4 MN1AG Stahl, hoch Mn 4 MN2Q (0.16) (0.008) Steel, high Mn 4 MN3R (0.026) MN4X (0.015) MN5R (0.03) RM C Mn Si S P Ni Cr Mo Cu Al V Sn Ø 40x15 mm, cast P Stahl, hoch Mn S Steel, high Mn CRM C Mn P S Si Cu Ni Cr Mo Al 32x16 mm, chill cast 3 C AISI 1211 Mod RM C Si S P Mn Ni Cr Mo Cu Sn Al Pb V As Co N Ø 41x13 mm, wrought 6 70B (0.024) AISI 41l B (<0.002) AISI 86L C (0.002) (<0.002) (<0.002) AISI 12L14 RM C Si S P Mn Ni Cr Mo Cu Sn Co V N Al Ø 40x15 mm, cast 4 MSFM1J Automatenstahl, hoch S und P 4 MSFM2H (0.003) (0.0008) (0.003) (0.002) Resulphurized/RephosphorizedSteel 4 MSFM3F MSFM4A chill cast RM C Si S P Mn Ni Cr Mo Cu Sn Ti Co Al V N Ø 41-44x19 mm, wrought (0.003) AISI S Automatenstahl 6 42A (0.009) - (0.007) AISI S Fr. Cutting St. 6 52D (0.004) AISI P 6 65C * (0.007) (0.002) AISI B * < (0.006) AISI 1141 * = nur für RFA 6 66K * (0.004) <0.001 < (0.0074) AISI 1215 only for XRF As= AISI 1117 CRM RM C Si S P Mn Ni Cr Cu Sn Pb As Sb Al N Ø 40x40 mm, wrought G (0.049) Automatemstahl G (0.056) Free Cuttimg Steel G (0.020) (0.027) G (0.007) G (0.019) (0.002) G (0.057) (0.018) (0.007) -

57 B R E I T L Ä N D E R G M B H Spezialstahl (Special Steel) CRM C Si Mn P S Cu Ni Cr Mo Al V As Ti Co Nb Ø 31x19 mm a (0.067) (<0.005) (0.0012) - - Gußstahl a (0.13) 0.26 (<0.005) (0.004) - - Cast Steel (0.015) (0.045) CRM C Si Mn P S Cu Ni Cr Mo Al V As Ti Co Ø 31x19 mm, chill cast 3 C (0.005) 0.42 (0.002) Gußstahl; Cast Steel CRM C Si Mn P S Cr Mo Ni Co Cu V W Ø 35x30 mm, wrought EC 290-1D Sonderleg.; Special Alloy EC Späne lieferbar; Chips available CRM C Si Mn P S Cr Mo Ni Al Co Cu N V Ø 35x25 mm, wrought EC 274-1D (0.021) Vanadiumstahl; V-Steel EC Späne lieferbar; Chips available CRM C Si Mn S P Cu Ni Cr Ti Ø 35x19 mm, cast 2 T1/ (<0.03) Dynamostahl 2 T2/ Dynamo Steel 2 T2/ T3/ < T4/ <0.005 CRM C Si S P Mn Cr Ni Cu Mo Ti V Al Nb Ø 35x19 mm, cast 2 B Dynamostahl; Dynamo Steel CRM C Si Mn P S Cu Ni Cr V Mo Sn Al Ø 31x19 mm Dynamostahl Späne lieferbar < Dynamo Steel Chips available CRM C Si Mn P S Cu Cr Ni Mo Al As Ti N Ø 35x30 mm, wrought EC 191-1D (0.002) Dynamostahl EC 186-1D Dynamo Steel EC 191-1, EC Späne lieferbar; Chips available CRM C Si Mn P S Cr Ni Cu Ti Zr B Sn Sb N Al Al(sol) Ø 37x30 mm CI Si-Stahl CI (0.0058) Si-Steel CI (0.0004) nur Satz/set only CI CI CI CI (0.0003) (0.0007)

58 B R E I T L Ä N D E R G M B H Spezialstahl (Special Steel) RM C Si S P Mn Cr Ni Mo Cu Co V Al W Nb Sn As X N S (0.085) Sb Ti N Bi Pb Ø 43x20 mm cast Nitrierstahl Ø 42x15 mm, wrought Cementation Steel Ø 40x15 mm, chill cast CRM C Si Mn P S Cr Ni Cu Mo Al Ø 32x45 mm, wrought CI (0.033) (0.008) Stahl, hoch Al CI (0.013) (0.004) Steel, high Al CI (0.018) (0.022) CI (0.029) (0.054) nur Satz/set only CI (0.015) (0.010) CI (0.057) (0.029) CRM C Si Mn P S Cr Ni Cu Mo V Al Ø 40x30 mm, wrought CI Gesenkstahl CI Die Steel CI CI nur Satz/set only CI RM C Mn Si P S Cr Ni Mo Cu Co Ti Al Fe Ø 35x20 mm CT 045A < < AerMet 100 CRM C Mn Si P S Cr Ni Mo Cu Co V Ti Al Nb B Sn Sb 35x35x30mm CT 070A < CT 098A <

59 B R E I T L Ä N D E R G M B H Spezialstahl (Special Steel) CRM N Ø 35x19 mm Stickstoff in Stahl, niedr. leg Späne lieferbar; Chips available Nitrogen in Low Alloy Steel CRM N Al Ca Ø 40x40 mm G N, Al + Ca in niedr. leg. Stahl Späne lieferbar G N, Al + Ca in Low Alloy Steel Chips available G G G G G G G G (0.029) G G CRM N C Si Mn P S Cr Ni Mo Co Cu V W Ø 47x15 mm, HIP J 49D 1.89 (1.0) (0.5) (0.4) (0.02) (0.01) (0.3) (0.2) (3.3) (0.3) (0.1) (5.1) (3.6) Vancron-Stahl, hoch N; Vancron Steel, high N RM N(sol) N(insol) C Si Mn P S Al Cr Ø 35x20 mm KW N Stickstoff in Stahl, niedr. leg. KW N Nitrogen in Low Alloy Steel KW N KW N nur Satz/set only KW N RM C Si S P Mn Ni Cr Mo Cu Nb N Ø 40x15 mm, chill cast 4 NSA1E cast Stickstoff in Edelstahl 4 NSA2G Nitrogen in Stainless Steel 4 NSA3J wrought 4 NSA4A NSA5A (0.010) NSA6A NSA7A wrought 4 NSB1D wrought 4 NSB2D NSB3G RM C Si S P Mn Ni Cr Mo Cu Nb N V W Co Ø 40x17 mm, chill cast 4 NSC1M Stickstoff in Edelstahl 4 NSC2N Nitrogen in Stainless Steel 4 NSC3V NSC4C NSC5A NSC6A HIP 4 NSD1B wrought Ø 38x15 mm

60 B R E I T L Ä N D E R G M B H Spezialstahl (Special Steel) CRM C Mn P S Si Cu Ni Cr V Mo Co Ti Al Nb Ta (0.07) < B Ø 31x19mm A286 Stahl, hoch warmfest Späne lieferbar; Chips available (<0.001) Ventilstahl; Valve Steel Steel, high temp CRM C Si Mn P S Cr Mo Ni Al B Co Cu N Sn Ti Zr Ø 38x30 mm, wrought EC 285-2D Stahl, martensit. Maraging Steel CRM C Si Mn P S Cr Mo Ni Al B Co Cu N Sn Ti V Ø 38x12 mm, wrought 6 161A (0.002) (0.0015) Stahl, martensit. Maraging Steel RM C Mn Si P S Cr Ni Mo Cu Co Ti Al B Ø 35x20 mm, wrought CT Maraging 250 CT Maraging 300 RM C Si S P Mn Ni Cr Mo Co Al Ti Ø 40x15 mm, cast R < Stahl, martensitaushärtend P Maraging Steel T (0.007) CRM C Mn Si P S Cr Ni Fe Mo Cu Co Ti Se 35x35x20 mm CT 124A High Perm 49-FM CT 136A < <0.001 < High Perm 45 CT 138A < < <0.001 < Glass Sealing 42 Gas Free CT 139A <0.001 < Low Exp 42 Dumet Core Rod CT 141A <0.001 < <0.001 < High Perm 49 RM C Mn Si P S Cr Ni Mo Cu Co Sn Ø 35x20 mm CT V N35 CT X Temp Comp 31 CT X < VAC 403 Weitere hochlegierte Sonderstähle siehe unter Abschnitt 2.3. Edelstahl, aust./edelstahl, hoch leg. For more special steels see part 2.3. Stainless Steel, aust./stainless Steel, high alloy

61 B R E I T L Ä N D E R G M B H Fe-Binärstandards (Fe-Binary Standards) wrought RM Mn Al Co Ni W Si Ø 40x15 mm, cast E D D J D E D D F D 7.71 Cr Mo Nb Ti V Ø 40x15 mm, cast G G E E D E E 0.41 RM C Si S P Mn Ni Cr Mo Al Ø 40x15 mm, cast 4 FC1A (0.013) (0.02) (0.008) (0.020) (0.06) (0.018) 0.45 (<0.005) (0.067) 4 FM1A (0.019) (0.01) (0.008) (0.011) 0.53 (0.015) (0.015) (<0.005) (<0.005) 4 FS1B (0.021) (0.02) (0.003) (0.05) (0.015) (0.015) (<0.005) (0.065)

Moulds for Iron and Non-Ferrous Metal Samples Casting of your own samples for spectrometric analysis requires different moulds, depending on alloy type and further handling.

Our product range comprises one special mould for cast iron, a modification for pig iron samples releasing robot compatible samples and a number of various classical copper moulds for different

Special Mould for Grey and Nodular Cast Iron BR 150 Mould with 45º casting angle in combined steel/copper construction Mould form from steel, casting on copper block ensures unidirectional chill cast

62 Moulds for Iron and Non-Ferrous Metal Samples Casting of your own samples for spectrometric analysis requires different moulds, depending on alloy type and further handling. There are different moulds that have been tested under practical working conditions. Our product range comprises one special mould for cast iron, a modification for pig iron samples releasing robot compatible samples and a number of various classical copper moulds for different metals. Special Mould for Grey and Nodular Cast Iron BR 150 Mould with 45º casting angle in combined steel/copper construction Mould form from steel, casting on copper block ensures unidirectional chill cast solidification on the analytical side of the sample only Spectro sample and pins for analysis of C + S simultaneously from same sample cast Pin samples of about 0.4 g each to be broken off easily and ready for analysis Most simple mounting for tight joining by putting mould form on copper block, no mechanism, no moving parts, self locking Copper block designed as flat surface block, enabling easy resurfacing and thus giving extended life time of mould Standard size of sample: Ø x 5 mm Special Mould for Pig Iron BR 150/RE This special mould, intended for casting pig iron samples directly after the blast furnace, is made completely from copper. Pig iron coming from the blast furnace is hotter than regular cast iron, this mould enables rapid cooling for white structure and avoids semi-welding of sample at the regular steel mould form. The big handle is support for the casting ladle and the robust construction is designed to be fixed on a solid steel beam for protection in rough working environment. The sample dimension is: 34 mm diameter with side wall 10 mm high for robot grip tongs.

63 B R E I T L Ä N D E R G M B H Reineisen (Pure Iron) CRM ppm C ppm Si ppm Mn ppm S ppm Cr ppm Mo ppm N 36-39x26 mm (achteckig; octangular) EC 098-1D CRM C Si Mn P S Cr Mo Ni Al As B Co Cu N Nb Pb Sn EC 097-1D (<0.01) (<0.001) (<0.001) (<0.001) (<0.005) (<0.0025) Ti V W Zr Bi Ca Mg O Sb Ta Zn Ø 38x x3 mm, wrought (<0.0015) (<0.001) (<0.001) (<0.001) (<0.005) (<0.005) (<0.005) (0.05) (0.001) (<0.0005) (<0.0001) EC Späne lieferbar; Chips available CRM C Mn P S Si Cu Ni Cr V Mo Co Ti As Al B Pb W Sn A (0.0001) (0.0002) (0.0007) <1ppm <5ppm (<0.0010) (<0.0002) (<0.0001) (<0.0003) (<0.0010) (<0.0001) (<0.0002) (<0.0001) (<2ppm) (<1ppm) Sb Ag Zn N Ge O H Fe Ø 31-35x19 mm <0.5ppm <0.2ppm <3ppm <20ppm <50ppm <70ppm <5ppm 99.9 (<1ppm) - (<1ppm) 20ppm - 360ppm CRM C Mn P S Si Cu Ni Cr Mo Al As Co N Sn Ti Ø 35x19 mm 6 50F weitere 11 informative Werte im Zertifikat further 11 informative values CRM C Si Mn P S Cr Ni Cu Al Ø 37x55 mm in certificate CI 15704a nur Satz/set only CI 15704a CI 15701a CI 15701a CI 15701a CRM C Si Mn P S Cr Ni Cu Al N Ø 40x60 mm CI nur Satz/set only CI CI CI CI CRM C Si Mn P S Cr Ni Cu Al N Ø 40x60 mm CI nur Satz/set only CI CI CI CI CRM C Si Mn P S Cr Ni Cu Al N Ø 35x30 mm CI nur Satz/set only CI CI CI CI

64 B R E I T L Ä N D E R G M B H Reineisen (Pure Iron) Pure Iron, SUS (Pure Iron, SUS) CRM C S Mn P Si Al Cu Ni Cr Co N O Ti Ø 39x19 mm 6 LC weitere 15 informative Werte im Zertifikat further 15 informative values in certificate CRM C Si Mn P S Cr Mo Ni Al As B Co Cu N Nb Sn Ti V 8 TL (0.0006) Ca Mg Pb Sb Zn Zr Ø 25x38 mm ( ) ( ) RM C S N Mn P Si Cu Al Cr Ni Sn As Nb Ti V Mo TH (0.21) (0.008) (0.012) (0.012) (0.035) (0.013) (0.016) (<0.001) (0.002) (0.024) (0.029) (0.002) (0.001) Zr Co Ø 40x40 mm (<0.001) (0.003) SUS C Mn P S Si Cu Ni Cr Mo Al As B Ca Co Mg Nb Pb Sb 6 SUCPIA < < (0.0002) <0.0001) <0.001 <0.001 < SUCPIB < < (0.0002) (<0.0001) <0.001 < <0.002 Sn Ta Ti V W Zr Fe 51x51x30 mm (0.002) < < (0.001) (<0.002) ) < < (0.001) (<0.0005) 99.8 SUS C Mn Si P S Cr Ni Ti Cu Al Mo V W Sn As Sb Co 1 DS Zr Pb 25x40x50 mm, wrought SUS C Si S P Mn Ni Cr Mo V Cu W Ti As Sn Co Al Pb B BR RE12 <10ppm <10ppm <5ppm <5ppm <5ppm <10 <10ppm <10ppm <5ppm <5ppm <10ppm <5ppm <5ppm <5ppm <5ppm <5ppm <5ppm <1ppm BR RE13 120ppm 20ppm 60ppm 70ppm 400ppm 100ppm 100ppm ppm ppm - - Sb Nb Ta Ca Zn N Ø 40x40 mm, wrought <5ppm <5ppm <5ppm <1ppm <1ppm <5ppm Ø 45x45 mm SUS C Si S P Mn Ni Cr Mo Cu Co Sn Al Nb W As Ti V Pb SL RE12 30ppm 30ppm <50ppm <20ppm 1ppm <100ppm <100ppm <50ppm 1ppm 10ppm 10ppm <50ppm 20ppm <100ppm <10ppm 3ppm <10ppm <20ppm SL RE13 <0.005 <0.01 <0.005 < < <0.005 <0.001 <0.003 <0.001 <0.001 <0.003 <0.001 <0.001 <0.001 Zr B Ca N Ta Ø 35-40x40 mm, wrought <10ppm <1ppm <1ppm <10ppm - <0.001 < <

65 B R E I T L Ä N D E R G M B H Stahl, Kontrollproben (Steel, Control Chart Samples) RM C Mn Si P S Cr Ni Mo V Ti Cu Al Sn W Co Nb As Zr BR ST BR ST BR ST B N Pb Sb Se Ø 45x30 mm (0.001) (0.01) (0.004) (0.0085) (0.001) (0.002) (0.001) (0.007) - RM C Si Mn P S Cr Ni Mo Al As Co Cu Nb Pb Sn Ti V W SL CFe < < < SL CFe SL CFe SL CFe SL CFe Zr Ca B Te Sb N Ø 35-40x30 mm + Ø 35-40x50 mm < < < Kontrollproben für Argonsystem bei OES; Control samples for argon system in OES Zur Kontrolle der Funkenkammer hinsichtlich Sauerstoff und Wasserstoffverunreinigung wird Brennfleck und Linienintensität zwischen der FeSi-Probe (SL CFe0) und einer Reineisenprobe z.b. SL RE12 oder 13 verglichen. Dabei sollen für eine hinreichend gute Entladungsatmoshäre bei HEPS/funkenähnlicher Entladung die nachstehend genannten Mindestintensitäten erreicht werden: In order to check possible oxygen and hydrogen contamination in the sparking chamber the burning spot appearance and line intensity between the FeSi sample SL CFe0 and a pure iron sample e.g. SL RE12 or 13 is compared. This comparison shall result at HEPS/sparklike discharge in the following minimum line intensities for a satisfactory discharge atmosphere: Fe 1877 > 60%, Fe 2730 > 70%, Fe 2813 oder Fe 3608 > 80%. Probe SL CFe0 - Si-Gehalt ca. 20%; Sample SL CFe0 - Si-content approx. 20% Ø 40x30 mm + Ø 40x50 mm RM C Mn Si P S Cu Cr Ni Al Mo W V Ti Co As Sn B Nb SP CM1A SP CM2A SP CM3A Pb Sb N Zr Ta Ø 35-43x25 mm

66 B R E I T L Ä N D E R G M B H Stahl, Kontrollproben (Steel, Control Chart Samples) RM C Mn Si P S Cu Cr Ni Al Mo W V Ti Co As Sn Nb N SP SL1A SP SL2A SP SL3A SP SL4A SP SL5A SP SL6A SP HS1A SP HS2A B Ta Ø 35-43x25 mm CRM C Mn Si P S Cu Cr Ni Al Mo W V Ti Co As Sn B Nb SP SP1A SP SP2A SP SP3A SP SP5B SP SP6A SP SP7A SP SP8B Pb Sb Ø 35-43x25 mm CRM C Mn Si P S Cu Cr Ni Al Mo W V Ti Co As Sn B Nb SP LA1A SP LA2B SP LA3B SP LA4B SP LA5A Pb Sb Zr Ca Ta N Ø 35-43x25 mm

67 B R E I T L Ä N D E R G M B H Stahl, SUS (Steel, SUS) SUS C Mn Si P S Ni Cr Cu Mo V Co W As Sn Sb Al B 1 DC SUS SUS Ti Ø 45x75, mm, wrought SUS C Si Mn P S Cr Mo Ni V W Cu Co Nb Ø 57x52 mm B SUS-1R heißisostat. verdichtet; hot isostat. pressed SUS C Si Mn P S Cr Mo Ni Al B Co Cu Nb Sn Ti V W 5 A < < <0.005 <0.005 <0.005 <0.005 < B < C D < E < < < F < < < G < <0.005 <0.01 < As Ca N Pb Ta Zr Ø 45x25, mm, wrought < < < < <0.005 <0.005 wrought SUS C Mn P S Si Cu Ni Cr Mo Al Co Nb Sn Ti V N O Ø 38x40 mm 6 SULF SULF SU SU SU SU Ca= x40 mm, wrought SUS C Mn P S Si Cu Ni Cr Mo Al Ca Co Nb Sn Ti V N O 6 SUP SU

68 B R E I T L Ä N D E R G M B H Stahl, SUS (Steel, SUS) SUS C Mn P S Si Cu Ni Cr Mo Al B Co Nb Sn Ti V N O 6 SU SU SU316L SU SUS/RM C Mn P S Si Cu Ni Cr Mo Sn Al V Co W N O Ø 38-44x150 mm < AISI < AISI 1040 RM < AISI (0.001) AISI E52100 RM SUS C Mn P S Si Cu Cr Ni Mo Sn Al V Nb W Ti Co Ø 32x17 mm (0.003) AISI AISI E (0.008) (0.002) (0.04) (0.004) (0.006) (0.002) (0.005) (0.004) (0.007) <0.008 (0.002) SUS C Si Mn P S Cr Ni Mo Cu Al Pb Sn Co Ti W V BR RH BR RH BR RH BR RH Mg B Ø 40x40 mm, wrought

69 B R E I T L Ä N D E R G M B H Stahl, SUS (Steel, SUS) SUS C Mn Si P S Cr Ni V Mo Ti Cu Al W Co Nb Ø 40x x150 mm, wrought HB MW HB MW HB MW HB MW-23K SUS C Si S P Mn Ni Cr Mo Cu Co Sn Al Nb W As Ti V Zr SL RH < < < < SL RH < SL RH SL RH < < SL RH <0.01 < SL RH < < SL RN <0.01 < <0.01 <0.01 < < <0.01 <0.001 < SL RN SL RN SL RN <0.01 < <0.01 <0.01 < < <0.001 < SL RN > SL RN < SL RN B Pb La N Ta Sb Ca Te Bi Ø 40x40 mm, wrought Fe= > <0.001 < <0.01 < <0.001 <0.01 < < <0.001 < <0.01 < <0.001 <0.01 < < SUS C Si Mn P S Cr Mo Ni Al As B Co Cu Nb Pb Sn Ti V SL RFeC < < SL RFeD < < < W Zr Ca Sb Ta Bi Te N Ø 40x40 mm 0.5 < < < <0.01 <0.01 <0.01

70 B R E I T L Ä N D E R G M B H Stahl, SUS (Steel, SUS) SUS C Si Mn P S Cr Ni Mo Cu Co Sn Al Nb W As Ti V Zr IA QAA IA QAC < <0.001 IA QAD B Ca Pb N Ta Sb Ø 36x38 mm, wrought < < < < RM N C Si Mn P S Cu Ni Cr Mo Ø 35x20 mm (2x A x B-20) KW A N in Stahl, niedr. leg.; N in Low Alloy Steel KW B nur Satz/set only SUS C Mn P S Si Cu Ni Cr Mo Al(sol) Al(ins) V Co As Nb Ti KW A-g KW B-g KW C-g Sn Ca B W Ø 35x20 mm, wrought nur Satz/set only Ø 35x20 mm, wrought SUS C Mn P S Si Cu Ni Cr Mo Al(sol) Al(ins) Ti Co As Nb Pb Ta KW D-c Edelst. KW E-c St.Steel KW F-c Satz/set SUS C Mn P S Si Cu Ni Cr Mo Al(sol) Al(ins) Ti Co As Nb Ø 35x20 mm, wrought KW G-b Edelstahl KW H-b Stainless Steel KW I-b < nur Satz/set only SUS C Si Mn Cr W Mo Co V P S Ni Cu Al Ø 40x40 mm, HIP-Technik; HIP-Technology HM Stahl, SUS HM Steel, SUS HM HM X Stangen bis zu 1 m Länge erhältlich HM 235Cr Bars up to 1 m length available HM T15Mo

71 For other reference materials beside steel, please visit our website or contact us to request your hardcopy catalogue

72 Anfrageformular Titel: Vorname: Name: Firma: Abteilung: Straße: PLZ: Tel: Stadt: Fax: Ich arbeite mit folgenden Techniken/Geräten: OEM / Hersteller: Verbrennung: XRF / Hersteller: ICP / Hersteller: AAS / Hersteller: Anderes: Ich möchte über folgende Referenzmaterialien informiert werden: Gusseisen - Festprobe Stahl-Festprobe Verbrennungsproben Bio-Materialien Metallspäne Mineral.-/metallurg.-/ umweltrelevante Proben ICP-/AAS-Lösungen Aluminium-Festprobe Kohle / Koks andere NE-Metalle Petrochemische Proben Ich möchte über folgende Probenvorbereitung informiert werden: FE-Schleifmaschinen NE-Metallfräsmaschine Aufschlussmaschinen Presswerkzeuge Schwingmühlen Hydraulische Pressen Kokillen Gusseisen Ich möchte über folgende Verbrauchsmaterialien informiert werden: Mahl-/Presshilsfmittel Küvetten / Folien AI-Becher Borate Ich möchte über kundenspezifische Artikel informiert werden: Öle oder ICP-/AAS- Lösungen Borat-Mischungen SUS-Proben Bitte senden Sie das ausgefüllte Formular an uns zurück: LGC Standards GmbH Mercatorstr Wesel Germany Tel: +49 (0) Fax: +49 (0) mail@breitlander.com Bitte kreuzen Sie hier an, wenn Sie damit einverstanden sind, zukünftig Marketingmaterial von der LGC Standards GmbH zu erhalten. Wir möchten Ihnen zukünftig Informationen zu Produkten und Aktivitäten zukommen lassen. Durch das Ausfüllen dieses Formulares willigen Sie darin ein, dass Ihre personenbezogenen Daten zum Zwecke der Administration verarbeitet werden. Eine Weitergabe an Dritte erfolgt entsprechend der gesetzlichen Vorgaben nicht. LGC Standards, All rights reserved.

Breitländer request form Title: First name: Surname: Company: Department: Address: Postcode: Tel: Country: Fax: Email: I use the following techniques: OEM / manufacturer: Combustion: XRF /

73 Breitländer request form Title: First name: Surname: Company: Department: Address: Postcode: Tel: Country: Fax: I use the following techniques: OEM / manufacturer: Combustion: XRF / manufacturer: ICP / manufacturer: AAS / manufacturer: Other: I am interested in the following reference materials: Cast iron - solid Steel - solid Combustion samples Biomaterials Metal chips Mineral, metalurg., environmental samples ICP / AAS solutions Aluminium - solid Coals / cokes Other non-ferrous metals Petrochemical samples Please send me information on the following equipment: Grinding machines NF milling machines Fusion machines Pressing tools & dies Swing grinders Hydraulic presses Casting molds Please send me information on the following consumables: Grinding / pressing aids Cups & films AIuminium - cups Borate - Fluxes Please send me information on customised products: Oil / ICP / AAS standards Customised borates Setting Up Samples Please send this form back to: LGC Standards GmbH Mercatorstr Wesel Germany Tel: +49 (0) Fax: +49 (0) mail@breitlander.com LGC Standards would like to be able to contact you from time to time with information about the LGC Group, its activities, and scientific/regulatory developments. By returning this form, you agree to your personal information being processed by LGC Standards for the administration and provision of our products and services. Please tick this box if you do wish to receive marketing material from us. LGC Standards does not pass on your personal details to third parties. LGC Standards, All rights reserved.