Ferro alloys. 1) Ferro silicon. 2) Ferro manganese. 3) Ferro chrome. 4) Silicon manganese. 5) Ferro aluminium. 6) Ferro titanium. 7) Ferro molybdenum
|
|
- Gilbert Foster
- 5 years ago
- Views:
Transcription
1 Ferro alloys 1) Ferro silicon 2) Ferro manganese 3) Ferro chrome 4) Silicon manganese 5) Ferro aluminium 6) Ferro titanium 7) Ferro molybdenum 8) Ferro silicon calcium 9) Ferro silicon magnesium 10) Ferro tungsten 11) Ferro phosphorus 12) Ferro vanadium 13) Ferro boron 14) Ferro silicon zirconium 15) Ferro nickel 1) Ferro silicon -- Ferrosilicon is a ferroalloy, an alloy of iron and silicon with an average silicon content between 15 and 90 weight percent. It contains a high proportion of iron silicides. The usual formulations on the market are Ferro silicon with SILICON % 15%,25%, 45%, 75%, and 90% silicon. The remainder is iron, with about 2% consisting of other elements
2 like aluminium,calcium and carbon upto 0.1%.size in form of lumps mm and powder upto -200mesh. Application ferrous and non ferrous foundries, wielding electrodes,silicon sheets etc. 2) Ferro manganese --- Ferro manganese is a Ferro alloys an alloys of higher portion of manganese and iron with an average manganese contains 70 weight percent. Specifications Mn-60-85%, P-0.15% max, Si-1.5% max., S-0.05% max. Carbon- For high carbon upto 8% max. For low carbon upto 0.03% max. Lumps mm powder 100mesh Application - steel foundries, wielding electrodes, chemicals etc.
3 3)Ferro chrome -- Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium. Mostly used for making stainless steel. Specifications Cr-60-70%, P-0.03% max, Si-2% as well as 4%max., S-0.05% max. Carbon- For high carbon upto 8% max. for low carbon upto 0.03% max Lumps mm powder (-100mesh) Application used for making stainless steel, wielding electrodes etc. 4)Ferro silicon manganese Silicon manganese a ferroalloy with high contents of manganese and silicon. It is used as a deoxidizer and an alloying element in steel. Specification - The standard grade silicon manganese contains 14 to 16% of silicon, 65 to 68% of manganese and 2% of carbon. The low carbon grade Silicon Manganese has carbon levels from 0.05 to 0.10%. Lumps mm,powder (-100mesh) Application -- steel industries, Ferro manganese production etc.
4 5)Ferro aluminium --- To form this ferro aluminum alloy, iron and aluminum are melted and mixed together. Used as an de-oxidant in steel making, the concentration of aluminum can vary in this alloy. Specifications Ferro Aluminium- Al % Lumps size 10-50mm, powder upto -200mesh Application steel industries, fire works, etc. 6) Ferro titanium -- Ferrotitanium is a ferroalloy, an alloy of iron and titanium with between 10 20% % titanium. It is used in steelmaking as a cleansing agent for iron and steel.
5 Specifications Ti starting from 22% to 75% grade,al 4-8% Max. Si 4% Max. C 0.1% Max. P 0.05% Max. S-0.03% Max. Lumps size mm powder 100mesh Application steel industries, fire works etc. 7) Ferro molybdenum -- Ferromolybdenum is an important iron molybdenum alloy, with a molybdenum content of 60-70%. It is the main source for molybdenum alloying of HSS steel. ferro molybdenum that is an alloying addition which sharply raises the mechanical and physical properties of steels..specifications Mo 60 75%, Si- Starting from 1% to 2.5% max., P- 0.05% max., S0.1% max., C-0.1%Max., P- 23% min. Lumps size 10-50mm, powder (-44mesh) Application special type steel making, stainless steel making etc.
6 8) Ferro silicon calcium or calcium silicide -- The Ferro Silico Calcium alloy is used in the manufacturing of steel of higher ranks. It also has the capability to replace the Aluminum in the de-oxidation process to produce the best merit of steel and special alloy. Specification - Si-55-65%, Ca-28-40%, C- 1%, S-0.1%, P-0.03% Lumps size 10-40mm, granules mm 9) Ferro silicon magnesium -- Our Ferro Silicon Magnesium alloy is one of the most important input in the manufacturing process of Spheroidal Graphite Iron. Specification Ferro Silico Manganesium -Mg-40-60%,Si-8-10% Lumps size mm, powder -(100mesh)
7 10) Ferro tungsten -- Ferro-tungsten is a master alloy for the production of tungstencontaining steels. Commercial ferro-tungsten contains between 75 and 85% W. It has a steel grey appearance and a fine-grained structure Specification w %, c 0.10%,si 2-3%, s- 0.05%, p -0.05% Size 10-50mm Application special steel,tools etc. 11) Ferro phosphorus Ferro phosphorus it is by products of the production of yellow phosphorus or it is smelt in phosphate rock and ferro rock in blast furnace. Specification p 22-28%, si 2%, c -1%, mn 2%,s -0.05%, Lumps size mm, powder 200mesh
8 Application steel making,metallic paints, etc. 12) Ferro vanadium Ferro vanadium is a key component in the production of carbon steel used for infrastructure. When added to crude steel, ferrovanadium creates a product that is lightweight and extremely high in tensile strength and wear resistance. Specification -- V-Starting from 50% to 80%, Si-1.5% max., Al-1% max., S-0.04% max., Carbon-0.1% max. Lumps size mm 13) Ferro boron -- A binary alloy of iron with a boron content of 17.5% to 20%. It is the lowest cost boron additive for steel and other ferrous metals.
9 Specification B 15%, C- 0.50%,SI - 2%, S 0.02%,P- 0.02%,AL- 0.50% Lumps size 1-50mm and powder -100mesh 14) Ferro silco zirconium -- The Ferro Silicon Zirconium offered by us is used as a gestation agent for high grades grey iron cast and as a deoxidizer in steel castings or in certain steels where a low residual aluminum is required. Our Silicon Zirconium also helps in reducing the porosity of casting hence improving the processing performance. Specification ZR 15-40%, SI 15-60%,C- 1%,AL- 1%,FE BALANCE
10 OTHERS FERRO ALLOYS FERRO COLOBIUM, FERRO NOIBUM),FERRO NICKEL AS PER COUSTUMER REQUIREMNT
Safety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
More informationThe objective of this document is to specify the chemicals characteristics and properties of the material Steel AISI Carbon Steel.
STEEL AISI - 2 Steel AISI 2. Carbon Steel. Carbon C.8.23 Manganese Mn.3.6 Phosphorus P -.4 Max Sulfur S -.5 Max FM-DO-CO-2 3/3/27 STEEL AISI - 862 Steel AISI 862. Carbon Steel. Carbon C.7.23 Silicon Si
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationStandardisation in the field of ferro alloys
Standardisation in the field of ferro alloys P. Dakshinamurthr ABSTRACT Indian Standards Institution has set up a separate Sectional Committee known as Ferro Alloys Sectional Committee, SMDC 8 in late
More informationCERTIFIED REFERENCE MATERIALS (CRM)
CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical
More informationRITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
More informationSUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
More informationJapanese Iron and Steel Certified Reference Materials April 9, 2012
I. CRMs for Chemical Analysis Japanese Iron and Steel Certified Reference Materials April 9, 2012 I-1. Pure iron series Mass content in % C Si Mn P S Ni Cr Mo Cu Co Al As Sn B N Na X 001-6 High grade pure
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA
ICS 77.140.01 H 40 GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA GB/T 221-2008 Replacing GB/T 221-2000 Notations for Designations of Iron and Steel GB/T 221-2008 How to BUY & immediately GET a
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC C COOPERATIVE PATENT CLASSIFICATION CHEMISTRY; METALLURGY (S omitted) METALLURGY C22 METALLURGY (of iron C21); FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS (production of
More informationAnalysis of Cast Iron Using Shimadzu PDA-7000
Analysis of Cast Iron Using Shimadzu PDA-7000 C112-0510M The analysis of low and high alloy cast iron by optical emission spectrometry is presented. Cast iron alloys are classified by their mechanical
More informationUse the arrow keys to easily navigate through the course.
STEEL Use the arrow keys to easily navigate through the course. Back Next 1 STEEL 2 A BRIEF HISTORY OF STEEL The history of steel is closely connected to the development of human culture and civilization.
More informationMaterials & Processes in Manufacturing. Introduction. Introduction ME 151. Chapter 6 Ferrous Metals and Alloys
2003 Bill Young Materials & Processes in Manufacturing ME 151 Chapter 6 Ferrous Metals and Alloys 1 Introduction Figure 6-1 Page 106 2003 Bill Young 2 Introduction Metals are example of a material (The
More informationAn Introduction to Indian Standards on Ferro Alloys
Ferro Alloy Industries in the Liberalised Economy Editors : A, K. Vaish. S.D. Singly, N.G. Gosxvanti and P. Raniachandrarao NML Jamshedpur 831 007, 1997, pp. 14-22 An Introduction to Indian Standards on
More informationPSection P. Sec. P Page 1
PSection P CHEMICAL ANALYSES OF STANDARD SIZES STANDARD METALS AND DESIGNATION SYSTEMS... 2 EFFECTS OF COMMON ALLOYING ELEMENTS IN STEEL....... 3-4 DESIGNATION OF CARBON STEELS........................
More informationNICKEL CHROMIUM ALLOYS
NICKEL CHROMIUM AND NICKEL THORIA ALLOYS 1 NICKEL CHROMIUM ALLOYS Two distinct groups of nickel chromium alloys for high temperature uses are as follow. The first group, which includes cast alloys containing
More informationCHAPTER 26 ORES, SLAG AND ASH
CHAPTER 26 ORES, SLAG AND ASH 1. This chapter does not cover; a) Slag or similar industrial waste prepared as macadam (heading 2517); b) Natural magnesium carbonate (magnesite), whether or not calcined
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More informationEnergy consumption, waste heat utilisation and pollution control in ferro alloy industry
Energy consumption, waste heat utilisation and pollution control in ferro alloy industry UMASHANKAR AGRAWAL Ferro Alloy Industry forms the backbone of the Iron Et Steel Industry in the World. Since energy
More informationCHAPTER 26 ORES, SLAG AND ASH
CHAPTER 26 ORES, SLAG AND ASH 1. This chapter does not cover; (a) Slag or similar industrial waste prepared as macadam (heading 2517); (b) Natural magnesium carbonate (magnesite), whether or not calcined
More informationThe excellent performance of austempered ductile iron
Design and control of chemical compositions for high-performance austempered ductile iron *Gong Wenbang 1, Chen Guodong 1, Luo Li 1, Hao Jing 2 and Zhang Zhonghe 3 (1. Wuhan Textile University, Wuhan 430073,
More informationWhat is Steel? Prepared By: John Cawley
What is Steel? Prepared By: John Cawley Presentation Objectives Describe the composition of steel. Identify the differences between steel and iron. Use the steel numbering system to identify various types
More informationProduct list PRODUCT CATEGORIES ACCEPTED AT THE EVENT
PRODUCT CATEGORIES ACCEPTED AT THE EVENT A) Producers, distributors, traders, service centres, agents, purchase groups and users of the following products: 1. Iron ores and derivatives 1.1. Magnetite 1.2.
More informationITC (HS), 2012 SCHEDULE 1 IMPORT POLICY SECTION XV BASE METALS AND ARTICLES OF BASE METAL
SECTION XV BASE METALS AND ARTICLES OF BASE METAL NOTES: 1. This Section does not cover: (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 3207 to 3210, 3212,
More informationMetallurgy of Aluminum Die Casting Alloys EC 305 Dave Neff
Metallurgy of Aluminum Die Casting Alloys EC 305 Dave Neff Dave Neff OUTLINE Where aluminum comes from Why alloys are useful Alloy designation and nomenclature Specific roles of alloy elements Properties
More informationEffects in Ductile Iron
Summary of Element Effects in Ductile Iron Rick Gundlach Element Materials Technology Wixom Insert Company Logo Here DIS Annual Meeting, June 7, 2012 Muskegon, Michigan Types of Alloying Elements Substitutional
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationAcid-Electric Arc Melting
I Refractories 157 Acid-Electric Arc Melting by D.E. Dutcher Direct arc melting using acid linings has found wide application in the steel foundry industry. Furnaces from 1 to 10 tons capacity are the
More informationStainless Steelmaking
16 Stainless Steelmaking Topics to discuss... Introduction Thermodynamics of decarburization of chromium melt Technology of stainless steel making Introduction Stainless steels contain typically 10-30
More informationBehavior of Alloying Elements during Electro-Slag Remelting of Ultrahigh Strength Steel
UDC 669.187 Behavior of Alloying Elements during Electro-Slag Remelting of Ultrahigh Strength Steel T.R. Bandyopadhyay 1, P.K. Rao 2, N. Prabhu 2 1 Metallurgical Engineering, National Institute of Technology
More informationCrystallization of Low-alloyed Construction Cast Steel Modified with V and Ti
ARCHIVES of FOUNDRY ENGINEERING DOI: 10.2478/afe-2013-0067 Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (2299-2944) Volume 13 Issue 3/2013 92 96 Crystallization
More informationAbout us. Who we are?
About us Who we are? OUR HISTORY DIVERSIFICATION AND SUCCESS 1959 Start Establishment & Focused on Dyes and Chemical Market Branches at Rajkot, Jetpur, Veraval and our Representatives in Whole Gujarat
More informationMETALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON- FERROUS METALS
XXXX C22 METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON- FERROUS METALS Note(s) [2012.01] (1) Processes or devices specific to the transformation of iron ore or iron carbonyl into
More informationNon-ferrous Extractive Metallurgy Prof. H. S. Ray Department of Metallurgical and Materials Engineering Indian Institute of Technology, Kharagpur
Non-ferrous Extractive Metallurgy Prof. H. S. Ray Department of Metallurgical and Materials Engineering Indian Institute of Technology, Kharagpur Module No. # 01 Lecture No. # 20 Extraction of Ferro Alloys
More informationModern Steelmaking Processes 1. Charge Materials. Topics to discuss. 1. Metallics 2. Auxiliary charges 3. Oxidants 4. Fuels 5.
11 Modern Steelmaking Processes 1. Charge Materials Topics to discuss 1. Metallics 2. Auxiliary charges 3. Oxidants 4. Fuels 5. Refractories Raw Materials Principal raw materials used for steel manufacture
More informationMetal Reference Materials - CHIPS
Your supplier for XRF Application Solutions ELEKTRONIK Fusion machines Metal Reference Materials - CHIPS Copper Nickel Chromium Cobalt Lead Magnesium Manganese Silver Superalloy Tin Titanium Tungsten Zinc
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More informationInfluence of Remelting AlSi9Cu3 Alloy with Higher Iron Content on Mechanical Properties
A R C H I V E S of F O U N D R Y E N G I N E E R I N G Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-3310) Volume 18 Issue 3/2018 25 30 4/3 Influence
More informationAtmy Analytical Labs Pvt. Ltd., I-38, DLF Industrial Area, Phase-1, Faridabad, Haryana. Discipline Chemical Testing Issue Date
Last Amended on - Page 1 of 11 I. METAL & ALLOYS 1. Steel (Carbon Steel & Low Alloy Steel) Carbon ASTM E-415: 2014, IS 228 (Part 1): 1997 (RA 2008) 0.01 % to 1.5 % 0.01 % to 1.5 % Silicon ASTM E-415: 2014,
More informationAnalysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000
C112-0514M Analysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000 Copper alloys are designated by their chemical composition with characteristic properties such as high corrosion resistance,
More informationInstitute of Precision Mechanics in Warsaw. Wrocław University Science and Technology. Poznań University Science and Technology
High temperature coatings from post processing Fe based chips and Ni based alloys as a solution for critical raw materials Solutions for critical raw materials under extreme conditions T. Dudziak 1 *,
More informationSTEEL. Classification of steel. Amount of carbon Amount of deoxidization Amount of alloys Depth of hardening. 15-Nov-17. R.D.
STEEL Classification of steel Amount of carbon Amount of deoxidization Amount of alloys Depth of hardening 1 On the basis of carbon With increase in carbon following increases Hardness Fatigue resistance
More informationSpecification Aluminium Die-Casting Alloy, high silicon content Aluminium Die-Casting Alloy, high silicon content
Specification 2012-10 Class: Aluminium and Al-alloys Class No.:21 Aluminium Die-Casting Alloy, high silicon content JED 853 Previous Edition Part name (for databases) 2011-11 Aluminium Die-Casting Alloy,
More informationIndian Ferro Alloy Scenario - An Overview
Indian Ferro Alloy Scenario - An Overview - Sanjay Sengupta F erro Alloys are vital a d d i t i v e s f o r steelmaking. These are special alloys of Iron containing some chemical elements like Mn, Cr,
More informationMSE-226 Engineering Materials
MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon
More informationIncoloy Alloy 800H/800HT (UNS N08810/088011)
Incoloy 800H/800HT (UNS N08810/088011) Incoloy 800H/HT is an outstanding corrosion resistant alloy that is recommended for use in the high temperature industrial conditions. It has higher strength than
More informationIUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT:
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON [EINECS NUMBER 231-096-4, CAS NUMBER 7439-89-6] including IRON, FURNACE [EINECS NUMBER 265-998-4 CAS NUMBER 65996-67-0] INTRODUCTION Each REACH
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationMachinability is the ease with which a given material may be worked with a cutting tool
Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in
More informationIssue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More information(12) Patent Application Publication (10) Pub. No.: US 2010/ A1
(19) United States US 2010O2.15983A1 (12) Patent Application Publication (10) Pub. No.: US 2010/0215983 A1 Patel et al. (43) Pub. Date: Aug. 26, 2010 (54) BRAZED CLADDINGS FOR CAST IRON SUBSTRATES (75)
More informationEFFECT OF EAF AND ESR TECHNOLOGIES ON THE YIELD OF ALLOYING ELEMENTS IN TOOL STEELS
EFFECT OF EAF AND ESR TECHNOLOGIES ON THE YIELD OF ALLOYING ELEMENTS IN TOOL STEELS T. Mattar, H.S.R. El-Faramawy, A. Fathy, M. Eissa, K.A. El-Fawakhry Steel Metallurgy & Ferroalloys Dept. Central Metallurgical
More information1. Scope :- 2. Referenced Documents :-
Standard Specification for Forged or Rolled N06030, N06022, N06035, N06200, N06059, N06686, N08020, N08024, N 08026, N08367, N10276, N10665, N10675, N 10629, N08031, N06045, N06025, and R20033 Alloy Pipe
More informationEFFECT OF CHROME ORE QUALITY ON FERROCHROME PRODUCTION EFFICIENCY
EFFECT OF CHROME ORE QUALITY ON FERROCHROME PRODUCTION EFFICIENCY M.H. Farjadi and J. Azari Faryab Mining Company, 54 Sohrevardi Ave. Tehran, Iran. E-mail: farjadi@faryab-mining.com and j.azari@faryab-mining.com
More informationSteel Properties. History of Steel
History of Steel Steel Properties Cast Iron Cast iron preceded wrought iron. It is brittle, has high carbon content with low tensile strength. It has excellent casting properties. It was mainly used to
More informationSample preparation for X-ray fluorescence analysis V. Fusion bead method part 2: practical applications
Technical articles Sample preparation for X-ray fluorescence analysis V. Fusion bead method part 2: practical applications Mitsuru Watanabe* 1. Introduction The general preparation method of fusion bead,
More informationINDEX FOR STAMPING DIES CAST MATERIALS
INDEX FOR STAMPING DIES CAST MATERIALS 06/03/10 PAGE DATE DESCRIPTION D-1 06/03/10 Index For Dies Cast Materials D-2 03/31/10 General Information D-3 General Information D-4 General Information D-5 General
More informationELMENTS AND THEIR EFFECT ON STEEL
ELMENTS AND THEIR EFFECT ON STEEL 1 INDEX 1. Aluminum. 3 2. Silicon.. 6 3. Manganese.. 9 4. Chromium... 12 5. Carbon. 16 6. Nickel. 19 7. Vanadium. 22 8. Titanium. 26 9. Boron. 30 10.Sulpher. 33 11.Phospherous
More informationNew GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1
Surname Other Names Centre Number 0 Candidate Number New GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1 ADDITIONAL MATERIALS A.M. WEDNESDAY, 18 January 2012 1 hour In addition to this paper you may require
More informationFERRO ALLOY DESIGN, FERRO ALLOY SELECTION AND UTILISATION OPTIMIZATION WITH PARTICULAR FOCUS ON STAINLESS STEEL MATERIALS
FERRO ALLOY DESIGN, FERRO ALLOY SELECTION AND UTILISATION OPTIMIZATION WITH PARTICULAR FOCUS ON STAINLESS STEEL MATERIALS C-J. Rick 1, M. Engholm 1 1 UVÅN HAGFORS TEKNOLOGI AB, Djursholmsvägen 30; 183
More informationNON FERROUS METAL MESH
WALCOOM Walcoom Corporation "Completion on time within budget, focused team and service, Walcoom is always ready to help." Walcoom offers a large selection of non ferrous metal meshes and also thoughtful
More informationSilver brazing alloys and fluxes PRODUCT GUIDE
Silver brazing alloys and fluxes PRODUCT GUIDE UNIVERSAL SILVER ALLOYS CADMIUM FREE Silver alloy Composition % Melting Operating Tensile International norms Density range temp. strength Ag Cu Zn Other
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationSPECIFICATION FOR TITANIUM AND TITANIUM ALLOY CASTINGS
TECHNICAL LITERATURE: ASME SB-367 [ASTM B367] Company Website: www.metalspiping.com Your Reliable Supplier of Titanium & Nickel Alloys SB-367 SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY CASTINGS SB-367
More information40 Non-ferrous metallurgy, metal alloys, electrometallurgy, refinement of metals and metal alloys
The German Patent Classification, Class 40 Page 1 40 Non-ferrous metallurgy, metal alloys, electrometallurgy, refinement of metals and metal alloys 40a 40a 40b 40b 40c 40c 40d 40d Metallurgy (IPC: C22B)
More informationNickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
More informationSTANDARD STEELS STANDARD STEELS 403
STANDARD STEELS 403 STANDARD STEELS Standard Steels Compositions, Applications, and Heat Treatments Steel is the generic term for a large family of iron carbon alloys, which are malleable, within some
More informationAluminum Alloy and Temper Designation Systems of the Aluminum Association
Introduction to Aluminum Alloys and Tempers J. Gilbert Kaufman, p9-22 DOI:10.1361/iaat2000p009 Copyright 2000 ASM International All rights reserved. www.asminternational.org CHAPTER 2 Aluminum Alloy and
More informationMANGANESE ORE, CHROME ORE, FERRO ALLOYS
MANGANESE ORE, CHROME ORE, FERRO ALLOYS GLOBAL STEEL PRODUCTION In 2011 World Crude Steel Production reached 1527 million tonnes and showed a growth of 6.8% over 2010 and China remained the World s largest
More informationIntroduction: Ferrous alloys - Review. Outline. Introduction: Ferrous alloys
Introduction: Ferrous alloys - Review Outline Introduction - Review - Ferritic SS - Austinitic SS - Matensitic SS - Precipitation Hardenable SS Cast Irons - Gray CI - Ductile CI - White CI - Malleable
More informationSecondary Steelmaking 1 Synthetic slag practice, injection ladle metallurgy, deoxidation
17 Secondary Steelmaking 1 Synthetic slag practice, injection ladle metallurgy, deoxidation Topics to discuss... Secondary steelmaking Synthetic slag practice Injection ladle metallurgy Deoxidation Secondary
More informationChina and its impact on the global ferrosilicon market
China and its impact on the global ferrosilicon market Kevin Fowkes Managing Consultant Metal Bulletin 28 th International Ferroalloys Conference Berlin, 13 th November 2012 What is ferrosilicon? A ferroalloy
More information3D METALS Discover the variety of Metal Powders The range of our standard metal powders
3D METALS Discover the variety of Metal Powders The range of our standard metal powders Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in
More informationATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
More informationADDITIONAL SCIENCE/CHEMISTRY. A.M. TUESDAY, 14 January hour
Surname Centre Number Candidate Number Other Names 0 GCSE 4472/02 ADDITIONAL SCIENCE/CEMISTRY CEMISTRY 2 IGER TIER A.M. TUESDAY, 14 January 2014 1 hour For s use Question Maximum Mark Mark Awarded 1. 8
More informationADDITIONAL SCIENCE/CHEMISTRY. A.M. TUESDAY, 14 January hour
Surname Centre Number Candidate Number Other Names 0 GCSE 4472/02 ADDITIONAL SCIENCE/CEMISTRY CEMISTRY 2 IGER TIER A.M. TUESDAY, 14 January 2014 1 hour For s use Question Maximum Mark Mark Awarded 1. 8
More informationENMAT101A Engineering Materials and Processes Associate Degree of Applied Engineering (Renewable Energy Technologies) Lecture 15 Cast Iron
ENMAT101A Engineering Materials and Processes Associate Degree of Applied Engineering (Renewable Energy Technologies) Lecture 15 Cast Iron http://www.sicoconrod.net www.highered.tafensw.edu.au Cast Iron
More informationSUPERALLOYS. Superalloys are high-performance materials AGE-HARDENABLE
AGE-HARDENABLE SUPERALLOYS To select the most suitable wrought age-hardenable superalloy for a specific application, engineers must know the basic mechanical properties as well as other characteristics
More informationof Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test
Chapter 11 Applications and Processing of Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test As usual, everything is standardized! After the Jominy
More informationCONTENTS. Foreword... xi Statements of Policy... xv Personnel... xvii Summary of Changes... xxvii
CONTENTS Foreword... xi Statements of Policy... xv Personnel... xvii Summary of Changes... xxvii SUBPART 1 STRESS TABLES... 1 Statement of Policy on Information Provided in the Stress Tables... 1 Guideline
More informationChromium research at SINTEF and NTNU Eli Ringdalen, SINTEF
Chromium research at SINTEF and NTNU Eli Ringdalen, SINTEF SINTEF - Who we are Our vision -Technology for a better society Independent non-profit research institute >90 % of income from contract R&D, Turnover
More informationSteel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Recap Eutectic phase diagram Eutectic phase diagram Eutectic isotherm Invariant point Eutectic Reaction Compositions of components
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationICP-AES Determination of 15 Kind of impurity elements in the Vanadium-aluminum alloy
Available online at www.sciencedirect.com Procedia Engineering 24 (2011 ) 447 453 2011 International Conference on Advances in Engineering ICP-AES Determination of 15 Kind of impurity elements in the Vanadium-aluminum
More informationwrought = rolled, extruded, forged heat treatable non-heat treatable
Physical metallurgy of alluminium Wrought Al alloys wrought = rolled, extruded, forged heat treatable non-heat treatable International alloy designation system (IADS) e.g. 1XXX = Al 7XXX = Al-Zn-Mg-(Cu)
More informationUse of Direct Reduced Iron in the Electric Furnace P CaO + MgO... o. 20. Mn Cr... <o.o05
Use of Direct Reduced Iron in the Electric Furnace DIRECTLY reduced iron is coming more and more into the headlines of the steelmaking industry and interest is widespread and increasing. Much work has
More informationThese elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Distribute * : Required Field Supplier Information Company Name * STMicroelectronics
More informationPRIMARY GRADES TURNING TURNING / INSERTS / INTRODUCTION TO CARBIDE INSERTS
/ ISERTS / ITRODUCTIO TO CARBIDE ISERTS PRIMARY GRADES group PVD Coated grades Carbide CVD Ceramics CB PCD Uncoated grades Carbide Cermet P M K S H P01 P05 P10 P15 P20 P25 P30 P35 P40 P45 P50 M01 M05 M15
More informationBorn from fire, made to endure NICKEL ALLOYS
Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster
More informationMolybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
More informationServices SAMPLE SUMMARY REPORT DR. PUMP, LLC Isuzu Rodeo. Atlanta, GA 05/24/2007
SAMPLE SUMMARY REPORT 7 Portage Trail 8.48.R 7 E A L 5.6.7 Fax:.6.7 44. 57 Report Date: 5/4/7 Primay Contact: Dr. Lev Nelik, PhD 977 Four Oaks Drive 6-75 Secondary Contact: None Provided Voice: None Provided
More informationB16 Case 4 13 Cr Stainless Steel ASME B16.5 and ASME B16.47 Flanges ASTM A182 F6a Class 1, A182 F6a Class 2, and A217 CA15 Material
CASES OF THE B16 VALVE, FLANGES, FITTINGS AND GASKETS STANDARDS Approval Date: May 27, 2016 Cases will remain available for use until annulled by the applicable Standards Committee B16 Case 4 13 Cr Stainless
More informationINTRO TO THERMAL SPRAY
INTRO TO THERMAL SPRAY Thermal Spray is a process were a material heated and propelled in a gas stream on to a substrate forming splats. The splats build up to create a coating. What is Thermal Spray?
More informationDiscover the variety of Metal Powders
Discover the variety of Metal Powders The range of our standard metal powder Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in metal-based
More informationIssue February 2018 Valid to December ISO 9001 Registered Quality Management
Issue February 2018 Valid to December 2018 ISO 9001 Registered Quality Management 015 Index February 2018 Page Index Inside front cover Introduction & Abbreviations. 3 Information - Definitions etc. 53
More information