Declaration of Performance No. DPGEB1018 v2

Size: px
Start display at page:

Download "Declaration of Performance No. DPGEB1018 v2"

Transcription

1 G&B Fissaggi S.r.l. C.so Savona Villastellone (TO), Italia tel fax info@gebfissaggi.com p. 1/5 Declaration of No. DPGEB1018 v2 1. Unique identification code of the product-type: Gebofix PRO VE-SF NORDIC 2. Intended uses: Intended use of the construction product according to ETA 16/0600 Generic type: Anchorages subject to: Bonded injection type anchor for use in non-cracked and cracked Static and quasi-static s: Base materials: - Reinforced or unreinforced normal weight according to EN 206-1: Strength class C20/25 to C50/60 according to EN 206-1: Non-cracked - Cracked threaded rod M12, M16, M20, M24 Service temperature range: Environmental conditions: I: -40 C to +40 C (max. short term temperature +40 C and max. long term temperature +24 C) II: -40 C to +80 C (max. short term temperature +80 C and max. long term temperature +50 C) - Elements made of zinc coated or hot-dip galvanized, class 4.6, 5.8 or 8.8 dry internal conditions - Elements made of stainless A2-70, A4-70 or A4-80 dry internal conditions, external atmospheric exposure (including industrial and marine environment) or exposure to permanently damp internal conditions if no particular aggressive conditions exist - Elements made of high corrosion resistant, property class 70 dry internal conditions, external atmospheric exposure, permanently damp internal conditions or in other particular aggressive conditions, e.g. permanent, alternating immersion in seawater, splash zone of seawater, chloride atmosphere of indoor swimming pools or atmosphere with chemical pollution (e.g. in desulphurization plants or road tunnels where de-icing materials are used) Installation: 1: Dry or wet 2: Flooded holes threaded rod M8, M10, M12, M16 reinforcing bar Ø8, Ø10, Ø12, Ø16 Perforation by hammer drilling Overhead installation is allowed Installation carried out by appropriately qualified personnel and under the supervision of the person responsible for technical matters on job site 3. Manufacturer: G&B Fissaggi S.r.l. C.so Savona 22, Villastellone (TO), Italia 5. System of AVCP: 1 6b. European Assessment Document: ETAG 001 Part 1 and Part 5, edition 2013, used as EAD European Technical Assessment: ETA 16/0600 Technical Assessment Body: TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Notified body: 1020 TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p.

2 p. 2/5 7. Declared performances: Declared performances according to ETAG 001:2013 Part 1 and Part 5, ETA 16/0600 (Design method Technical Report TR 029 o CEN/TS :2009) Threaded rod diameter M8 M10 M12 M16 M20 M24 M27 M30 Installation parameters d Nominal diameter of bar d 0 Nominal diameter of drill bit d fix Diameter of clearance hole in the fixture h ef,min Minimum effective anchorage depth h ef,max Maximum effective anchorage depth h 1 Depth of the drilling hole h ef h min Minimum thickness of the member h ef h ef + 2d 0 T inst Maximum installation torque [Nm] t fix Thickness of fixture 0 to 1500 s min Minimum spacing h ef / 2 c min Minimum edge distance h ef / 2 Tension failure mode N Rk,s Characteristic tension resistance of Combined pull-out and failure mode Characteristic bond resistance non-cracked cracked I I A s x f uk Rk,ucr [N/mm 2 ] flooded holes Rk,ucr [N/mm 2 ] NPD Rk,ucr [N/mm 2 ] flooded holes Rk,ucr [N/mm 2 ] NPD Rk,cr [N/mm 2 ] NPD NPD flooded holes Rk,cr [N/mm 2 ] NPD NPD Rk,cr [N/mm 2 ] NPD NPD flooded holes Rk,cr [N/mm 2 ] NPD NPD c,c30/37 Increasing factor for C30/37 [-] 1.04 c,c40/50 Increasing factor for C40/50 [-] 1.08 c,c50/60 Increasing factor for C50/60 [-] 1.10 k 8 k in non-cracked in cracked Concrete cone failure mode k ucr k cr in non-cracked in cracked [-] NPD 7.2 [-] NPD 7.2

3 p. 3/5 Threaded rod diameter M8 M10 M12 M16 M20 M24 M27 M30 s cr,n Critical spacing 3.0 h ef c cr,n Critical edge distance 1.5 h ef Splitting failure mode s cr,sp Critical spacing 2 c cr,sp c cr,sp Critical edge distance for h/h ef h ef Critical edge distance for 2.0 > h/h ef > h ef h Critical edge distance for h/h ef h ef Installation safety factor inst Safety factor, [-] 1.2 1,4 Safety factor, flooded holes [-] 1.4 NPD Shear failure mode without lever arm V Rk,s Characteristic shear resistance of 0.5 x A s x f uk k 2 Ductility factor acc. to CEN/TS sect Shear failure mode with lever arm M 0 Rk,s Characteristic bending resistance of Concrete pry-out failure mode k / k 3 Factor in eq. (5.7) of TR029 / in eq. (27) of CEN/TS sect [-] 0.8 [Nm] 1.2 x W el x f uk [-] 2.0 Concrete edge failure mode l f Effective length of anchor min(h ef; 8 d nom) d nom Outside diameter of anchor Displacement on tension, non-cracked F Service tension N Short term displacement under tension Long term displacement under tension Displacement on tension, cracked F Service tension NPD NPD Short term displacement under tension Displacement on shear, non-cracked and cracked NPD NPD F Service shear V0 V Short term displacement under shear Long term displacement under shear

4 p. 4/5 Reinforcing bar diameter Ø8 Ø10 Ø12 Ø16 Ø20 Ø25 Ø32 Installation parameters d Nominal diameter of bar d 0 Nominal diameter of drill bit h ef,min h ef,max Minimum effective anchorage depth Maximum effective anchorage depth h 1 Depth of the drilling hole h ef h min Minimum thickness of the member h ef s min Minimum spacing h ef / 2 c min Minimum edge distance h ef / 2 Tension failure mode N Rk,s Characteristic tension resistance of Combined pull-out and failure mode Characteristic bond resistance noncracked c,c30/37 c,c40/50 c,c50/60 I flooded holes flooded holes Increasing factor for C30/37 Increasing factor for C40/50 Increasing factor for C50/60 Factor acc. to CEN/TS k 8 sect in non-cracked Concrete cone failure mode Factor acc. to CEN/TS k ucr sect in non-cracked A s x f uk h ef + 2d 0 Rk,ucr [N/mm 2 ] Rk,ucr [N/mm 2 ] NPD Rk,ucr [N/mm 2 ] Rk,ucr [N/mm 2 ] NPD [-] 1.04 [-] 1.08 [-] 1.10 s cr,n Critical spacing 3.0 h ef c cr,n Critical edge distance 1.5 h ef Splitting failure mode s cr,sp Critical spacing 2 c cr,sp c cr,sp Critical edge distance for h/h ef 2.0 Critical edge distance for 2.0 > h/h ef > 1.3 Critical edge distance for h/h ef h ef 4.6 h ef h 2.26 h ef

5 p. 5/5 Reinforcing bar diameter Ø8 Ø10 Ø12 Ø16 Ø20 Ø25 Ø32 Installation safety factor inst Safety factor, [-] 1,2 Safety factor, flooded holes [-] 1.4 NPD Shear failure mode without lever arm V Rk,s k 2 Characteristic shear resistance of Ductility factor acc. to CEN/TS sect Shear failure mode with lever arm M 0 Rk,s Characteristic bending resistance of Concrete pry-out failure mode k / k 3 Factor in eq. (5.7) of TR029 / in eq. (27) of CEN/TS sect A s f uk [-] 0.8 [Nm] 1.2 W el f uk 2.0 Concrete edge failure mode l f Effective length of anchor min(h ef; 8 d nom) d nom Outside diameter of anchor Displacement on tension, non-cracked F Service tension N Short term displacement under tension Long term displacement under tension Displacement on shear, non-cracked F Service shear V0 V Short term displacement under shear Long term displacement under shear The performance of the product identified above is in conformity with the set of declared performances. This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: Andrea Maggioni, General manager Villastellone, 7 October 2016

Declaration of Performance

Declaration of Performance G&B Fissaggi S.r.l. C.so Savona 22 10029 Villastellone (TO), Italia tel. +39 011 9619433 - fax +39 011 9619382 www.gebfissaggi.com - info@gebfissaggi.com p. 1/12 Declaration of Performance No. DPGEB1009

More information

Declaration of Performance No. DPGEB1006 v2.1

Declaration of Performance No. DPGEB1006 v2.1 G&B Fissaggi S.r.l. C.so Savona 22 10029 Villastellone (TO), Italia tel. +39 011 9619433 - fax +39 011 9619382 www.gebfissaggi.com - info@gebfissaggi.com p. 1/7 Declaration of No. DPGEB1006 v2.1 1. Unique

More information

Declaration of Performance

Declaration of Performance Expandet ESI Extreme Pro, EVL Extreme Pro (galvanized or stainless steel bonded anchor) Intended use or uses of the construction product according to ETAG 001 parts 1 and 5 Generic type Bonded anchor for

More information

Declaration of Performance

Declaration of Performance Declaration of Performance 1343-CPR-M 530-11/01.15 1. Unique identification code of the product-type: Bonded injection type anchor Mungo MIT Tropical and MIT- VE Plus for use in non-cracked concrete 2.

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Declaration of Performance

Declaration of Performance Declaration of Performance KEM-UP + Vinylester Bonded anchor vinylester resin in cartridge via Trieste, 1 San Giovanni al Natisone (UD) Italy - ph. +39 0432 747911 www.friulsider.com - info@friulsider.com

More information

ETA-11/0141 of 08/08/2016. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej

ETA-11/0141 of 08/08/2016. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl European Technical Assessment of 08/08/2016 General Part (English

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment)

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment) INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011

More information

European Technical Assessment. ETA-17/0237 of 15/05/2017. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej

European Technical Assessment. ETA-17/0237 of 15/05/2017. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011

More information

English translation prepared by CSTB - Original version in French language. Tecfi S.p.A. SS Appia km 193 Pastorano (CE) 81050, Italia

English translation prepared by CSTB - Original version in French language. Tecfi S.p.A. SS Appia km 193 Pastorano (CE) 81050, Italia Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

Declaration of Performance Number 1219-DPC-0071 According to Regulation EU No 305/2011

Declaration of Performance Number 1219-DPC-0071 According to Regulation EU No 305/2011 Item code: ZJE01; ZJE31; ZJE71; ZJE81 Manufacturer: Tecfi S.p.A. - S.S. Appia, km 193-81050 Pastorano (CE), Italy Table 1 - Intended use Generic type: Metal anchor for use in concrete, torque controlled

More information

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment)

Designated according to Article 29 of Regulation (EU) No 305/2011 and member of EOTA (European Organisation for Technical Assessment) INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 2 825-04-71 (+48 2 825-76-55 fax: (+48 2 825-52-86 www.itb.pl Designated according to Article 29 of Regulation (EU) No 305/2011

More information

Declaration of Performance

Declaration of Performance Declaration of Performance 1343-CPR-M 530-7/01.15 1. Unique identification code of the product-type: Bonded injection type anchor Mungo MIT-SP/MIT-SPE Plus, MIT-SP Winter for use in non-cracked concrete

More information

European Technical Assessment ETA-14/0454 of 11/12/2014

European Technical Assessment ETA-14/0454 of 11/12/2014 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

SVM-PSC Polyester resin for use in concrete

SVM-PSC Polyester resin for use in concrete SVM-PSC Polyester resin for use in concrete Bonded anchor with anchor rod made of galvanized steel or stainless steel of sizes M8 to M30 for use in non-cracked concrete Basic product information Features

More information

English translation prepared by CSTB - Original version in French language. Injection system DeWalt PURE110-PRO

English translation prepared by CSTB - Original version in French language. Injection system DeWalt PURE110-PRO Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE EN DECLARATION OF PERFORMANCE DoP No. Hilti HUS3 0672-CPD-0361 1. Unique identification code of the product-type: Hilti Screw Anchor HUS3 2. Type, batch or serial number as required pursuant to Article

More information

European Technical Assessment ETA-15/0288 of 17/06/2015

European Technical Assessment ETA-15/0288 of 17/06/2015 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of

More information

ETA-13/0058 Assessment

ETA-13/0058 Assessment Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Member of www.eota.eu European Technical

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE DECLARATION OF PERFORMANCE 1. Unique identification code of the product-type: MULTI-MONTI-plus (MMS-plus) 2. Type, batch or serial number or any other element allowing identification of the construction

More information

Declaration of Performance No1109-CPD-0080 According to the Regulation EU No 305/2011

Declaration of Performance No1109-CPD-0080 According to the Regulation EU No 305/2011 Item code:aje01 and AJE31 Manufacturer:Tecfi S.p.A. - S.S. Appia, km 193-81050 Pastorano (CE), Italy 1. Intended use Product-type: Metal anchor for use in concrete Anchor type: Technical description of

More information

ETA-13/0584 of 24/09/2014. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej

ETA-13/0584 of 24/09/2014. European Technical Assessment. General Part. Technical Assessment Body issuing the. Instytut Techniki Budowlanej Member of INSTYTUT TECHNIKI BUDOWLANEJ PL 00-611 WARSZAWA ul. Filtrowa 1 tel.: (+48 22) 825-04-71 (+48 22) 825-76-55 fax: (+48 22) 825-52-86 www.itb.pl www.eota.eu European Technical Assessment of 24/09/2014

More information

European Technical Approval ETA-11/0344

European Technical Approval ETA-11/0344 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE EN DECLARATION OF PERFORMANCE DoP No. Hilti HIT-HY 170 1343-CPR-M500-9/07.14 1. Unique identification code of the product-type: Injection System Hilti HIT-HY 170 2. Type, batch or serial number as required

More information

European Technical Assessment. ETA-12/0398 of 29/12/2017. General Part. Instytut Techniki Budowlanej. Technical Assessment Body issuing the

European Technical Assessment. ETA-12/0398 of 29/12/2017. General Part. Instytut Techniki Budowlanej. Technical Assessment Body issuing the European Technical Assessment General Part of 29/12/2017 (English language translation the original version is in Polish language) Body issuing the European Trade name of the construction product Product

More information

English translation prepared by CSTB - Original version in French language. FRIULSIDER Via Trieste,1 I San Giovanni al Natisone (UDINE) ITALIE

English translation prepared by CSTB - Original version in French language. FRIULSIDER Via Trieste,1 I San Giovanni al Natisone (UDINE) ITALIE Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment

More information

ITW Construction Products Italy S.r.l. V.le Regione Veneto, PADOVA (PD) ITALIEN. V.le Regione Veneto, PADOVA (PD) ITALIEN

ITW Construction Products Italy S.r.l. V.le Regione Veneto, PADOVA (PD) ITALIEN. V.le Regione Veneto, PADOVA (PD) ITALIEN European Technical Assessment ETA-13/1068 of 28 February 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to

More information

Hilti HIT-CT 1 with HIT-V

Hilti HIT-CT 1 with HIT-V Hilti HIT-CT 1 Injection mortar system Benefits - Hilti Clean technology (clean- Tec) Hilti HIT-CT 1 330 ml foil pack (also available as 500 ml foil pack) Static mixer HIT-V(-F) rods rods rods - Environmentaly

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Technical data No. 17/0001 of 25/04/2017

Technical data No. 17/0001 of 25/04/2017 Hilti Corporation Feldkircherstrasse 100 FL-9494 Schaan Principality of Liechtenstein www.hilti.group Technical data No. 17/0001 of 25/04/2017 General Part Trade name Injection system Hilti HIT-RE 500

More information

Page 9, issued on 03. February 2009 Threaded rod M8, M10, M12, M16, M20, M24, M27, M30 with washer and hexagon nut L df h h ef 0 tfix h min Reinforcing bar 8, 10, 12, 14, 16, 20, 25, 28, 32 acc. to Annex

More information

Hilti HIT-HY 170 mortar with HIT-V rod. Anchor Fastening Technology Manual. Hilti HIT-HY 170 with HIT-V HIS-(R)N 03 / /

Hilti HIT-HY 170 mortar with HIT-V rod. Anchor Fastening Technology Manual. Hilti HIT-HY 170 with HIT-V HIS-(R)N 03 / / Anchor Fastening Technology Manual Hilti HIT-HY 170 with HIT-V HIS-(R)N 1 Hilti HIT-HY 170 with HIT-V Injection mortar system Benefits Hilti HIT-HY 170 500 ml foil pack (also available as 330 ml foil pack)

More information

English translation prepared by CSTB - Original version in French language. Throughbolt TX

English translation prepared by CSTB - Original version in French language. Throughbolt TX Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Member of www.eota.eu European Technical

More information

European Technical Assessment. ETA-11/0336 of 17 July English translation prepared by DIBt - Original version in German language.

European Technical Assessment. ETA-11/0336 of 17 July English translation prepared by DIBt - Original version in German language. European Technical Assessment ETA-11/0336 of 17 July 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction

More information

PRODUCT DATA SHEET THROUGH BOLTS S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 HHA A2

PRODUCT DATA SHEET THROUGH BOLTS S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 HHA A2 S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 HHA A2 PRODUCT DATA SHEET THROUGH BOLTS www.sormat.com facebook.com/sormat youtube.com/sormatfixing SORMAT SORMAT PDS-S-KA-EN-2018-05-03 1 Premium-quality through

More information

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer:

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer: DoP SM0BS00 page / 7 SM0BS00 Unique identification code of the product-type: TURBO SMART concrete screw Type or serial number or any other element allowing identification of the construction product as

More information

PRODUCT DATA SHEET THROUGH BOLTS. facebook.com/sormat youtube.com/sormatfixing SORMAT Product data sheet 1217

PRODUCT DATA SHEET THROUGH BOLTS.   facebook.com/sormat youtube.com/sormatfixing SORMAT Product data sheet 1217 S-KA S-KAK S-KAH A4 S-KAH HCR S-KAR A2 S-HHA A2 PRODUCT DATA SHEET THROUGH BOLTS www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 Premium-quality through bolts for fixing in cracked and non-cracked

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

Page 9 of European Technical Approval ETA-10/0280 Marking: Marking: Identifying Identifying mark: mark: Anchor Anchor identity: identity: Category Category: : S KA H (stainless steel) K (hot dip galvanized)

More information

English translation prepared by CSTB - Original version in French language. Simpson Strong-Tie ZAC. Les 4 chemins Sainte-Gemme-la-Plaine France

English translation prepared by CSTB - Original version in French language. Simpson Strong-Tie ZAC. Les 4 chemins Sainte-Gemme-la-Plaine France Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Website : www.cstb.fr www.eota.eu European Technical

More information

SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE

SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE LA+ LAL+ PRODUCT DATA SHEET DROP IN ANCHORS SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 ETA-approved drop in anchors ideal for suspension systems

More information

ue du Bâtiment Techniqu Member of General Part Trade name produit Product family Famille de Titulaire Manufacturer Harjutie 5 Finland

ue du Bâtiment Techniqu Member of   General Part Trade name produit Product family Famille de Titulaire Manufacturer Harjutie 5 Finland Member of Centre Scientifique et Techniqu ue du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR R-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

General Information. Installation Information Design Information Material Information Ordering Information

General Information. Installation Information Design Information Material Information Ordering Information General Information General Information Drop-In Anchor ProDUCT DESCRIPTION The is a drop-in anchor which shows good performance for competitive price for typical mass applications. It can be used in a

More information

EJOT Through Bolts. Premium-quality through bolts for fixing in cracked and non-cracked concrete.

EJOT Through Bolts. Premium-quality through bolts for fixing in cracked and non-cracked concrete. EJOT Premium-quality through bolts for fixing in cracked and non-cracked concrete www.ejot.com Anchors and Instaation Technology Premium-quality through bolts for fixing in cracked and non-cracked concrete

More information

Declaration of Performance No1109-CPD-0079 According to the Regulation EU No 305/2011 HXE01 - HXE02 - HXE12 - HXE85 - HXE03

Declaration of Performance No1109-CPD-0079 According to the Regulation EU No 305/2011 HXE01 - HXE02 - HXE12 - HXE85 - HXE03 Tecfi S.p.A. - Sistemi di Fissaggio Sede operativa, stabilimento e corrispondenza: 1 - Intended use Product-type: Anchor type: Metal anchor for use in concrete Undercut anchor for use in concrete under

More information

English translation prepared by CSTB - Original version in French language. Smart expansion anchor types H / T / K

English translation prepared by CSTB - Original version in French language. Smart expansion anchor types H / T / K Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment

More information

Anchor HSA Fastening. Technology Manual HSA. Stud anchor. Version /

Anchor HSA Fastening. Technology Manual HSA. Stud anchor. Version / Anchor HSA Fastening Stud anchor Technology Manual HSA Stud anchor Version 2015-09 09 / 2015 1 HSA Stud anchor Anchor version HSA Carbon steel with DIN 125 washe HSA-R Stainless steel A4 HSA-R2 Stainless

More information

(English language translation, the original version is in Czech language) CM300E

(English language translation, the original version is in Czech language) CM300E TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Prosecká 811/76a CZ-190 00 Praha 9 Tel.: +420 286 019 458 Internet: www.tzus.cz Authorised and notified according to Article 10 of the Council Directive

More information

English translation prepared by CSTB - Original version in French language

English translation prepared by CSTB - Original version in French language Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment Member

More information

English translation prepared by CSTB - Original version in French language POWERS PB-PRO-S

English translation prepared by CSTB - Original version in French language POWERS PB-PRO-S Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

HVU with HAS/HAS-E rod adhesive anchor system

HVU with HAS/HAS-E rod adhesive anchor system HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity - suitable

More information

Société SPIT Route de Lyon F BOURG-LES-VALENCE France. Société SPIT Route de Lyon F BOURG-LES-VALENCE France

Société SPIT Route de Lyon F BOURG-LES-VALENCE France. Société SPIT Route de Lyon F BOURG-LES-VALENCE France Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

(English language translation, the original version is in Czech language) MA Green Plus

(English language translation, the original version is in Czech language) MA Green Plus TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Prosecká 811/76a CZ-190 00 Praha 9 Tel.: +42 286 019 412 Fax: +42 286 883 897 Internet: www.tzus.cz Authorised and notified according to Article 10 of the

More information

PRODUCT DATA SHEET SAFETY BOLT

PRODUCT DATA SHEET SAFETY BOLT S SK B S A4 SK A4 B A4 PRODUCT DATA SHEET SAFETY BOLT LEGENDARY TWIN-CONE HEAVY DUTY ANCHOR FOR HI-POWER PERFORMANCE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 Legendary twin-cone heavy

More information

HKD Push-in anchor, Single anchor application

HKD Push-in anchor, Single anchor application HKD Push-in anchor, Anchor version HKD Carbon steel with lip HKD-S(R) Carbon steel, stainless steel with lip (R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved,

More information

English translation prepared by CSTB - Original version in French language. Injection System ZETACHEM EPX 30 / 41

English translation prepared by CSTB - Original version in French language. Injection System ZETACHEM EPX 30 / 41 Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

SOUDAFIX VE400-SF. Temperature -10 C (1) -5 C 0 C 5 C 10 C 20 C 30 C 35 C 40 C

SOUDAFIX VE400-SF. Temperature -10 C (1) -5 C 0 C 5 C 10 C 20 C 30 C 35 C 40 C Revision: 20/06/2014 Page 1 of 9 Technical Data: Base Consistency Curing system (1) Cartridge temperature = 15 C (2) Curing time on dry surface (20 C/65% R.H.) (x2 on wet surface) Specific Gravity Vinylester

More information

(English language translation, the original version is in French language) ELEMATIC ETD Z A4 10/04/ /01/2017

(English language translation, the original version is in French language) ELEMATIC ETD Z A4 10/04/ /01/2017 Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément

More information

L Length [mm] [mm] 3. Intended use Generic type: Torque controlled expansion anchor throughtbolt type. Made of steel, zinc plated ISO 4042 A2

L Length [mm] [mm] 3. Intended use Generic type: Torque controlled expansion anchor throughtbolt type. Made of steel, zinc plated ISO 4042 A2 Declaration of DoP MTP-X-en 1. Product type MTP-X anchor 2. Identification Code APX08LLL L Length [mm] Metric [mm] Ø Outer diameter [mm] Fixture thickness [mm] M8 8 L-66 APX10LLL 3 last digits of M10 10

More information

ETA-13/0772. fischer Bolt anchor FXA. Klaus-Fischer-Straße Waldachtal DEUTSCHLAND. fischerwerke. of this assessment EAD

ETA-13/0772. fischer Bolt anchor FXA. Klaus-Fischer-Straße Waldachtal DEUTSCHLAND. fischerwerke. of this assessment EAD Member of www.eota.eu TA Approval body for construction products and types of construction Bautechnisches Prüfamt An institutlon established by the Federal and Laender Governments Designated according

More information

HKD Push-in anchor, Single anchor application

HKD Push-in anchor, Single anchor application HKD Push-in anchor, Anchor version HKD Carbon steel with lip HKD-S(R) Carbon steel, stainless steel with lip (R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved,

More information

R-CAS-V Spin-In Capsule with Threaded Rods

R-CAS-V Spin-In Capsule with Threaded Rods R-CAS-V Spin-In Capsule with Threaded Rods High-performance, quick-setting, styrene-free vinylester resin for concrete Approvals and Reports ETA-10-0108 Product information Features and benefits Approved

More information

HST Carbon steel. HST-R Stainless steel HST-HCR High corrosion resistance steel. Fire resistance

HST Carbon steel. HST-R Stainless steel HST-HCR High corrosion resistance steel. Fire resistance Stud anchor Anchor version Carbon steel -R Stainless steel -HCR High corrosion resistance steel Benefits - suitable for non-cracked and cracked concrete C 20/25 to C 50/60 - highly reliable and safe anchor

More information

European Technical Approval ETA-98/0001

European Technical Approval ETA-98/0001 European Technical Approval ETA-98/0001 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1. Rebar BSt 500 S

Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1. Rebar BSt 500 S Hilti HIT-HY 110 Injection Mortar System Benefits Hilti-HY 110 available in 330ml and 500ml foil packs. Static mixer HIT M1 suitable for non-cracked concrete C 20/25 to C 50/60 suitable for dry and water

More information

European Technical Approval ETA-08/0376

European Technical Approval ETA-08/0376 European Technical Approval English translation prepared by DIBt - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck

More information

Typical Applications. 1) Concrete Temperature 2) Cartridge Temperature must be min. +15 C. 3) Cartridge Temperature must be under +20 C.

Typical Applications. 1) Concrete Temperature 2) Cartridge Temperature must be min. +15 C. 3) Cartridge Temperature must be under +20 C. Vinylester Injection System with ETA Assessment Option 1 for Cracked & Non-Cracked Concrete. SA TS 101:2015 Compliant Suitable Anchor Rods M8 - M30 and 8.8 Zinc Plated and Hot Dip Galvanized Stainless

More information

European Technical Assessment ETA-14/0453 of 11/12/2014

European Technical Assessment ETA-14/0453 of 11/12/2014 ETA-Danmark A/S Göteborg Plads 1 DK-21590 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011

More information

(English language translation, the original version is in French language) SPIT FIX Z A4. Société SPIT Route de Lyon F BOURG-LES-VALENCE

(English language translation, the original version is in French language) SPIT FIX Z A4. Société SPIT Route de Lyon F BOURG-LES-VALENCE Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément

More information

HST3 Metal expansion anchor

HST3 Metal expansion anchor HST3 Anchor version Benefits HST3 Carbon steel HST3-R Stainless steel - highest resistance for reduced member thickness, short spacing and edge distances - increased undercut percentage in combination

More information

English translation prepared by CSTB - Original version in French language. FM753 Crack

English translation prepared by CSTB - Original version in French language. FM753 Crack Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Website : www.cstb.fr European Technical Assessment

More information

English translation prepared by CSTB - Original version in French language. PoSB-PRO Power Screwbolt

English translation prepared by CSTB - Original version in French language. PoSB-PRO Power Screwbolt Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

R-RBP Rawlbolt - Bolt Projecting for use in cracked and non-cracked concrete

R-RBP Rawlbolt - Bolt Projecting for use in cracked and non-cracked concrete R-RBP Rawlbolt - Bolt Projecting for use in cracked and non-cracked concrete World's most popular all-purpose expanding shield anchor - bolt projecting version Approvals and Reports ETA-11/0479 Product

More information

HKD Push-in anchor, Single anchor application

HKD Push-in anchor, Single anchor application Push-in anchor, Anchor version Carbon steel with lip -S(R) Carbon steel, stainless steel with lip -E(R) Carbon steel, stainless steel without lip Benefits - simple and well proven - approved, tested and

More information

Hilti HVU-TZ foil capsule. HAS-TZ HAS-R-TZ HAS-HCR-TZ rod. Shock

Hilti HVU-TZ foil capsule. HAS-TZ HAS-R-TZ HAS-HCR-TZ rod. Shock Adhesive anchor Mortar system Benefits Hilti HVU-TZ foil capsule HAS-TZ HAS-R-TZ HAS-HCR-TZ rod - suitable for cracked and noncracked concrete C 20/25 to C 50/60 - high loading capacity - suitable for

More information

System Components. Grades. General Information. Installation Information Design Information Material Information Ordering Information

System Components. Grades. General Information. Installation Information Design Information Material Information Ordering Information General Information General Information PV5 PRO Polyester Injection Adhesive Anchoring System ProDUCT DESCRIPTION The PV5PRO is a twocomponent polyester adhesive anchoring system. The system includes injection

More information

R-RBL Rawlbolt - Loose Bolt for use in cracked and non-cracked concrete

R-RBL Rawlbolt - Loose Bolt for use in cracked and non-cracked concrete R-RBL Rawlbolt - Loose Bolt for use in cracked and non-cracked concrete World's most popular all-purpose expanding shield anchor - loose bolt version Approvals and Reports ETA-11/0479 Product information

More information

SIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD

SIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD BLS BLS-P BLS A4 SD ILS LPA A4 PRODUCT DATA SHEET SUPERPLUS UNDERCUT ANCHORS SIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD www.sormat.com facebook.com/sormat youtube.com/sormatfixing

More information

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer:

Intended uses of the construction product, in accordance with the applicable harmonized technical specification as foreseen by the manufacturer: DoP SMRPT001 page 1 / 5 SMRPT001 Unique identification code of the product-type: SMRPT Type or serial number or any other element allowing identification of the construction product as required pursuant

More information

Injection System Batifix VIFIX V. BATIFIX Z.A. La Gravière FAREINS FRANCE. Plant France 1

Injection System Batifix VIFIX V. BATIFIX Z.A. La Gravière FAREINS FRANCE. Plant France 1 Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical

More information

Epoxy Injection System with ETA Assessment Option 1 for Cracked & Non-Cracked Concrete SA TS 101:2015 Compliant

Epoxy Injection System with ETA Assessment Option 1 for Cracked & Non-Cracked Concrete SA TS 101:2015 Compliant Epoxy Injection System with ETA Assessment Option 1 for Cracked & Non-Cracked Concrete SA TS 101:2015 Compliant Suitable Anchor Rods M8 - M30 and 8.8 Zinc Plated and Hot Dip Galvanized Stainless Steel

More information

Type or serial number or any other element allowing identification of the construction product as

Type or serial number or any other element allowing identification of the construction product as DoP SMRPF001 (rev.1) page 1 / 5 SMRPF001 Unique identification code of the product-type: SMRPF Type or serial number or any other element allowing identification of the construction product as required

More information

(English language translation, the original version is in French language) SPIT FIX Z A4. Société SPIT Route de Lyon F BOURG-LES-VALENCE

(English language translation, the original version is in French language) SPIT FIX Z A4. Société SPIT Route de Lyon F BOURG-LES-VALENCE Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément

More information

HIT-ICE INJECTION MORTAR. Technical Datasheet Update: Jun-18

HIT-ICE INJECTION MORTAR. Technical Datasheet Update: Jun-18 HIT-ICE INJECTION MORTAR Technical Datasheet Update: Jun-18 HIT-ICE injection mortar Anchor design (ETAG 001) / Rods&Sleeves / Concrete Injection mortar system Hilti HIT-ICE 296 ml cartridge Anchor rod:

More information

Approvals / Certificates:

Approvals / Certificates: Approvals / Certificates: Product Description The TP E SD mortar is a 2-component reaction resin mortar based on a pure epoxy and will be delivered in an exclusive 2-C cartridge system. This high performance

More information

Pintakäsittely Mitat Tuotenro. Eurooppalainen arviointiasiakirja

Pintakäsittely Mitat Tuotenro. Eurooppalainen arviointiasiakirja SUORITUSTASOILMOITUS Nro: DoP-120257 [FI] Tuotetyypin yksilöllinen tunniste: ESSVE Golden Anchor Valmistaja: ESSVE Produkter AB BOX 7091 164 07 Kista Sweden info@essve.se Eurooppalainen tekninen arviointi

More information

English translation prepared by CSTB - Original version in French language. Throughbolt PTB-ETA7-PRO

English translation prepared by CSTB - Original version in French language. Throughbolt PTB-ETA7-PRO Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 European Technical Assessment

More information

DoP N 15/0826 DIAGER EPOXY PURE. 2. Type, batch or Article 11(4): CODE F352650E F354700E ITEM EPOXY PURE EPOXY PURE

DoP N 15/0826 DIAGER EPOXY PURE. 2. Type, batch or Article 11(4): CODE F352650E F354700E ITEM EPOXY PURE EPOXY PURE DECLARATION OF PERFORMANCE According to Construction Product Regulation n 305/2011 DoP N 15/0826 1. Unique identification code of the producttype: DIAGER EPOXY PURE 2. Type, batch or serial number or any

More information

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language

Designated. according to. Article29 of. Regulation (EU) Nº 305/2011. English translation prepared by IETcc. Original version in Spanish language Member of Designated according to Article29 of www.eota.eu Regulation (EU) INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA C/ Serrano Galvache n. 4 28033 Madrid (Spain) Tel.: (34) 91 302 04 40

More information

English translation prepared by CSTB - Original version in French language. Stud anchor BOAX-FMC

English translation prepared by CSTB - Original version in French language. Stud anchor BOAX-FMC Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Website : www.cstb.fr European Technical Assessment

More information

Sormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art.

Sormat ITH-Pe PRODUCT DATA SHEET. ITH-Pe - POLYESTER BASED RESIN STYRENE FREE. Polyester based injection resin, styrene free. ITH 165 Pe art. ITH 165 Pe art. 72900 Application in noncracked concrete ITH 300 Pe art. 72940 ITH 410 Pe art. 72941 Content Page Product description 2 Properties and benefits 2 Sample applications 2 Applications and

More information

Type or serial number or any other element allowing identification of the construction product as

Type or serial number or any other element allowing identification of the construction product as DoP SMRPT001 page 1 / 5 SMRPT001 Unique identification code of the product-type: SMRPT Type or serial number or any other element allowing identification of the construction product as required pursuant

More information