Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
|
|
|
- Annice Reeves
- 6 years ago
- Views:
Transcription
1 1 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
2 2 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
3 3 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.
4 4 Note: Above dimensions will vary due to manufacturer s tolerances
5 5 Note: Above dimensions will vary due to manufacturer s tolerances
6 6 Note: Above dimensions will vary due to manufacturer s tolerances
7 7 Note: Above dimensions will vary due to manufacturer s tolerances
8 8 Note: Above dimensions will vary due to manufacturer s tolerances
9 9 BI-METALLIC CD STUDS BMWP MATERIAL: WASHER: PIN BI - METALLIC STUD Pin - 10 GA (.135 Dia.) Stainless Steel 12 GA (.105 Dia.) Stainless Steel Base - Aluminum (5000 Series) Self-locking washers are available in a variety of sizes, shapes and materials. TO ORDER OR SPECIFY, GIVE: 1. Product Code... BMWP 2. Length... L BMAR ANNULAR RING BI-METALLIC STUD MATERIAL: Pin-Stainless Steel Base-Aluminum (5000 Series) CAP: The cap for use with this stud is the WCN AR CAP annular ring cap. TO ORDER OR SPECIFY, GIVE: 1. Product Code... BMAR 2. Length... L BMNE NOTCHED END BI-METALLIC STUD MATERIAL: Pin-Stainless Steel Base- Aluminum (5000 Series) WASHER: The washer for use with this stud is the WAK notched end key hole slotted washer. TO ORDER OR SPECIFY, GIVE: 1. Product Code... BMNE 2. Length... L
10 10 CD FLANGED-ACOUSTICAL HANGER (LAGGING STUD) STUD D L FD HD HL W T / /8 5/16 1/ / /8 3/8 5/64 MATERIAL: LOW CARBON STEEL C-0.23% max. P-0.04% max. Mn % max S-0.05% max. STAINLESS STEEL AISI grade - 302/304/305 std. Other grades available upon request. MECHANICAL PROPERTIES: Tensile 60,000 psi (min.) Values for various grades Yield 50,000 psi (min.) available. Elongation 20% (in 2 inches) PLANTING: Copper plating is standard. Does not apply to Stainless. ANNEALING: Studs are annealed where required. Studs are annealed where required. MATERIAL: ALUMINIUM ALLOY & 5000 series Other alloys available MECHANICAL PROPERTIES:. TO ORDER OR SPECIFY, GIVE: 1 Product Code... CD F-AH 2 Diameter...D 3 Length... L 4 Material...
11 11 CD FLANGED ANNULAR RING (NAVY) STUD NOM. D MIN. L RD RL 1/8 3/ /16 3/ MATERIAL: LOW CARBON STEEL CONFORMS TO MIL - S TYPE: VI CLASS:III STAINLESS STEEL CONFORMS TO MIL - S TYPE: VIII CLASS: III MECHANICAL PROPERTIES: Tensile 60,000 psi (min.) Values for various grades Yield 50,000 psi (min.) available. Elongation 20% (in 2 inches) PLATING: Copper plating is standard. Does not apply to Stainless. TO ORDER OR SPECIFY, GIVE: 1 Product Code... CD F-AR 2 Diameter...D 3 Length... L 4 Material... MCAL "Mushroom CAP" Aluminium STUD SIZE CAP PART NO. 3/16 MCAL NOTE: AR CAP is sold separately. Not a component part of stud.
12 12 From an.060 diameter no-thread CD stud to a 7/16 hex CD stud, IC can furnish a special CD stud to meet your precision fastening requirements. The illustrations below indicate just a few of the possible configurations in which CD studs can be manufactured. These illustrations however do not represent any standard IC in-stock product line. If you require a special configuration CD stud for your application, please submit a sketch or drawing with dimensions and material requirements to IC for a quote.
CAPACITOR DISCHARGE (CD) STUD WELDING PROCESS
STUS (General Information) CAPACITOR ISCHARGE (C) STU WELING PROCESS 1. STU AGAINST WORK. 2. STORE ENERGY ISCHARGE THROUGH SPECIAL WEL TIMING TIP AN STU STARTS OWNWAR. 3. STU FORCE INTO MOLTEN METAL. 4.
CAPACITOR DISCHARGE (CD) WELD STUDS & STUD WELDING EQUIPMENT
CAPACITOR DISCHARGE (CD) WELD STUDS & STUD WELDING EQUIPMENT THE WELDING PROCESS THE CAPACITOR DISCHARGE (CD) STUDWELDING PROCESS CD Studwelding is generally used to weld smaller diameter studs to thin
CD Capacitor Discharge The Process
CD Capacitor Discharge The Process. CD. Capacitor Discharge Why CD Studs are better CD. Capacitor Discharge General Specifications Weld Base: CD. Stud Load/Torque Strengths Stud Material Stud Size Maximum
CAPACITOR DISCHARGE(CD)
1 CAPACITOR DISCHARGE(CD) The capacitor discharge CD Pin is a Low Carbon Steel, Stainless Steel or Aluminum weld pin that is ideal to apply with pin welding or stud welding equipment. Manufactured with
ALLIANCE weld pins are used in conjunction with ALLIANCE self-locking washers to complete the insulation fastening operation.
ALLIANCE weld pins simplify the permanent attachement of insulation to just about any kind of construction metal surface. They can be applied quickly and easily using standard CD or ARC stud welding equipment.
Mechanical Properties - Standard. Standard Mild Steel Studs AWS Type A
General Material Specifications Material Specifications Nelson s studs may be made of one of the following materials, as specified on individual specification sheets. Certificates of chemical analysis
ARC WELD STUDS & ARC STUD WELDING EQUIPEMENT
ARC WELD STUDS & ARC STUD WELDING EQUIPEMENT ARC STUDS GENERAL INFORMATION THE ARC STUDWELDING PROCESS ARC Studwelding is generally used to weld larger diameter studs to thick base metals. ARC Studs may
Mechanical Requirements for Stainless Steel & Non-Ferrous Fasteners
Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
Cantilevered Rail System
Knight Global's Cantilevered Rail Systems are designed to eliminate the need for a four post floor structure system. It provides an alternative to workstations with minimal floor space. A wide range of
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs 1
Designation: F 738M 02 METRIC Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs 1 This standard is issued under the fixed designation F 738M; the number immediately following the
DOMESTIC WEDGE ANCHOR
GENERAL INFORMATION GENERAL INFORMATION DOMESTIC WEDGE ANCHOR Carbon Steel and Stainless Steel Wedge Expansion Anchors Anchor produced in the U.S.A., nut and washer made in Taiwan or China* PRODUCT DESCRIPTION
Sheet Metal Flashing and Trim
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 076200 - Sheet
DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC
METRIC MIL-DTL-38999/33E 31 October 2011 SUPERSEDING MIL-DTL-38999/33D 30 May 2008 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC This specification
DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC
METRIC 31 October 2011 SUPERSEDING MIL-DTL-38999/33D 30 May 2008 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, SERIES III, METRIC This specification is approved
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
INCH-POUND MIL-DTL-83513/5H 3 April 2012 SUPERSEDING w/amendment 2 21 January 2010 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE This specification is
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
INCH-POUND MIL-DTL-83513/5H 3 April 2012 SUPERSEDING w/amendment 2 21 January 2010 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE This specification is
Downloaded from DETAIL SPECIFICATION NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE
INCH-POUND 14 JUNE 2011 SUPERSEDING MIL-DTL-45913C 30 APRIL 1998 DETAIL SPECIFICATION NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE This specification is approved for use by all Departments and Agencies
LEGACY REPORT ER-5608* Reissued February 1, Legacy report on the 1997 Uniform Building Code
LEGACY REPORT ER-5608* Reissued February 1, 2004 www.icc-es.org Business/Regional Office 5360 Workman Mill Road, Whittier, California 90601 (562) 699-0543 Regional Office 900 Montclair Road, Suite A, Birmingham,
SECTION COMPOSITE METAL DECKING
PART 1 GENERAL 1.1 DESCRIPTION SECTION 05 36 00 1. Use this section only for NCA projects. 2. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
COMPLEtE. COMPLEtE. STUD WELDING Products. STUD WELDING Products. Insulation Pins. section 6. Service Knowledge Integrity
Products Service Knowledge Integrity section 6 Insulation Pins FOR INQUIRIES, TO PACE ORDERS, SERVICE AND TECHNICA SUPPORT CONTACT ANY OF THE FOOWING: OFFICE: 216.904.4008 EMAI: SAES@COMPETESTUDWED.COM
Section 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
New Large Diameter Drilling Solution with a Quick Change Tip and Indexable Inserts
Diameters (All with Inch Shanks) Inch: 1.032" - 1.781" (every 1/32") Metric: 26.0mm - 45.0mm (every 1mm) Bodies Inch Weldon Shanks Metric Shanks Available Upon Request Length/Diameter Ratio 5xD Tip Geometry
ITEM 442 METALS FOR STRUCTURES
AFTER NOVEMBER 1, 2008 ITEM 442 METALS FOR STRUCTURES 442.1 Description. These specifications shall govern for materials such as structural steel, wrought iron, bronze, and other metals used in structures,
Subcommittee 3, Connections August 15, 2012
AISI Coittee on Specifications for the Design of Coittee/Subcoittee Ballot: CS11-345C Subcoittee 3, Connections August 15, 2012 SPECIFICATION E3 ed Connections The following design criteria and the requirements
/14111//ANIIII FASTENING SYSTEMS, INC. STUDS (General Information) THE ARC STUD WELDING PROCESS 8-1
THE ARC WELDING PROCESS 1. AND CERAMIC 2. LIFT'S AND ARC IS DRAWN. AGAINST THE WORK PLATE. 416 411P /14111//ANIIII 3. CONTROL TIMES OUT AND PLUNGES INTO MOLTEN STEEL. ARC Stud Welding involves the same
SPECIFICATION FOR NICKEL ALLOY FORGINGS
SPECIFICATION FOR NICKEL ALLOY FORGINGS 01 (Identical with ASTM Specification B 564-00 except that certification has been made mandatory.) 1. Scope 1.1 This specification covers forgings of nickel alloy
DETAIL SPECIFICATION SHEET ELBOW - PIPE TO HOSE, 45
INCH-POUND AN844 Rev 13 3 October 2013 SUPERSEDING AN844 Rev 12 7 June 2011 DETAIL SPECIFICATION SHEET ELBOW - PIPE TO HOSE, 45 Reinstated after 7 June 2011. Inactive for new design after 7 June 2011.
* Outside recommended Brinell hardness testing range (ASTM E 10)
Material Data The data information contained on this Web site is derived from many different sources. While Central Steel and Wire Company has taken all reasonable steps to ensure that all the information
When printed, this copy is for information only.
When printed, this copy is for information only. Products produced to this specification are made under license from Hi-Shear Corporation. Each licensee is a member of the Engineering Standards Committee
DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
INCH-POUND MS51524C 15 November 2017 SUPERSEDING MS51524B 17 March 2016 DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED Reactivated after 15 November 2017 and may be
Workmanship Acceptance Standards
Workmanship Acceptance Standards Subject: O.D and I.D tolerances and concentricity Scope: To establish common practice for specifying tolerances of outside and inside diameters and concentricity of washers.
DETAIL SPECIFICATION SHEET FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
INCH-POUND MS51532C 5 March 2018 SUPERSEDING MS51532B 16 February 1988 DETAIL SPECIFICATION SHEET FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED This specification
NORTH AMERICA ONLY ROUND CLAMP BAR FOR DIE FASTENING
PRINTED COPY IS UNCONTROLLED NORTH AMERICA ONLY ROUND CLAMP BAR FOR DIE FASTENING NEXT PAGE --> ROUND CLAMP BAR WDX15-80-0101 EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER
MILITARY SPECIFICAIION TANK, FUEL, AIRCRAFT, SELF-SEALING
26 July 1983 SUPERSEDING AMENDMENT 4 26 January 1981 MILITARY SPECIFICAIION TANK, FUEL, AIRCRAFT, SELF-SEALING This amendment forms a part of Military Specification MIL-T-5578C, dated 31 July 1963, and
Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates
Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic
Sign & Post Installation. Standard Specifications and Standard Drawings. July 2017 Edition
Standard Specifications Sign & Post Installation Utility Services Department 500 George Street North, Peterborough, Ontario, K9H 3R9 Transportation Division Telephone: 705-742-7771 Fax: 705-876-4621 Sign
Jayant Impex Private Limited
+91-8042909029 Jayant Impex Private Limited https://www.jayantferro.com/ We are among leading trader, importer and Supplier Pipe Fittings & Bars product. The offered range of products is best known for
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
STAINLESS STEEL DELIVERY PROGRAM CONTENTS
DELIVERY PROGRAM CONTENTS INTRODUCTION 1 FLAT BAR 2 PLATE 4 SPECIALTY BLOCKS 5 ROUND BAR 6 SQUARE BAR 8 HEXAGON BAR 8 SHEET 9 ROUND TUBING 10 SQUARE TUBING 10 PIPE 11 HYPODERMIC TUBING 11 ANGLE 12 THREADED
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-50 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Horizontal Swing Check Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other
Signal Framework. Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom. Signals. Overview.
Signal Framework Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom Cabinets Controllers Signals Signs Software Specialty Overview McCain s Signal Framework collection
Stainless Steel Bright Bars (Cold Drawn)
Stainless Steel Bright Bars (Cold Drawn) Applications : Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins,
TOP VIEW SIDE VIEW. Description: Clam shell socket for 4.5x12.5mm, 0.4mm pitch QFN74 SECTION B-B SECTION A-A. CG-QFN-7010 Drawing.
3.00 THRU ALL A A1 corner GHz QFN Socket - Direct mount, solderless Features A 25.48 Directly mounts to target PCB (needs tooling holes) with hardware High speed, reliable Elastomer connection Minimum
LOAD BEARING ROLLER ASSEMBLIES Engineering Data Installation Notes
Installation Notes INSTALLING STUD TYPE LOAD BEARING ROLLER ASSEMBLIES Mounting holes should be machined to the nominal stud size within +.001/-.000 (+.025mm / -.000mm) tolerance. When properly aligned,
SECTION COMPOSITE METAL DECKING
PART 1 GENERAL 1.1 DESCRIPTION: SECTION 05 36 00 COMPOSITE METAL DECKING SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable in the
CHEMICAL /4" 3/8" to 5/8" /8" 3/4" to 1-1/4" 1 10
194 ASTM A193 GRADE B7 HIGH-STRENGTH CARBON, ZINC PLATED (ASTM B 633 YELLOW DICHROMATE) B7 (AISI 414) anchor rod is supplied with nuts meeting the requirements of ASTM Specification A 194, Grade 2H (ASTM
#500 Series Bearings... LuBo Industries, Inc.
#5 Series Bearings... 1 #5 Series Bearings...... 1 Advantages of ubo #5 Series Bearings 3 Metric Size 3 5 7 8 9 1 11 1 13 13 14 Straight Bushings SB(SP, F) Straight Bushings (#5B Bushings) SBB Flanged
ROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING
ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity
Table of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
ITEM 442 METAL FOR STRUCTURES
ITEM 442 METAL FOR STRUCTURES 442.1. Description. This Item shall govern for all structural steel, high strength bolts, forgings, steel castings, iron castings, wrought iron, bronze, steel pipe and tubing,
Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More
Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products
TABLE OF CONTENTS. Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3. Pipe, Pipe Tube, Tube. Sheets & Plates
DRI1529-McNeilus-Revised 12/12/05 12:18 PM Page 1 McNeilus Steel, Inc. TABLE OF CONTENTS Page Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3 Cold Roll (Flats, Hex, Rounds) 17 Pipe, Pipe Tube,
Addendum #4 NEW LOW HEAD OXYGEN SYSTEM Contractor EXHIBIT T SPECIAL PROVISIONS SECTION METAL SHADE STRUCTURE
SECTION 13 34 00 METAL SHADE STRUCTURE PART 1 - GENERAL 1.01 STRUCTURE TYPE A. Structure shall be free standing rigid frame and gable roof with slopes as indicated. Structure shall also include foundation,
The following excerpt are pages from the North American Anchor Fastening Technical Guide, 2011.
The following excerpt are pages from the North American Fastening Technical Guide, 2011. Contact Hilti s team of technical support specialists between the hours of 7:00am 6:00pm CST for complete details
SECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
MILITARY SPECIFICATION SHEET SCREW, MACHINE - PAN HEAD, STRUCTURAL, CROSS RECESSED
INCH-POUND MS27039F 15 NOVEMBER 1995 SUPERSEDING MS27039E 24 JANUARY 1995 MILITARY SPECIFICATION SHEET SCREW, MACHINE - PAN HEAD, STRUCTURAL, CROSS RECESSED This Specification is approved for use by all
1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
STAINLESS STEEL REPAIR CLAMPS DN 40 - DN 1200
STAINLESS STEEL REPAIR CLAMPS DN 40 - DN 1200 FAST, PERMANENT REPAIR AND REINFORCEMENT SOLUTION FOR MOST PIPE TYPES AND SIZES FEATURES Manufactured from grade 316 stainless steel for superior corrosion
DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, PLUG, SERIES III, METRIC
METRIC MIL-DTL-38999/32E 7 July 2017 SUPERSEDING MIL-DTL-38999/32E 4 October 2013 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, PLUG, SERIES III, METRIC This specification
Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
BOST-BRONZ (OIL-IMPREGNATED SINTERED BRONZE)
earings Section Contents OST-RONZ (OIL-IMPREGNTE SINTERE RONZE) General escription...136 137 Catalog Selections/imensions...138 144 ER-N-RONZ (660 CST RONZE) General escription...145 Catalog Selections/imensions...146
BOST-BRONZ (OIL-IMPREGNATED SINTERED BRONZE)
earings Section Contents OST-RONZ (OIL-IMPREGNTE SINTERE RONZE) General escription...136 137 Catalog Selections/imensions...138 144 ER-N-RONZ (660 CST RONZE) General escription...145 Catalog Selections/imensions...146
BOST-BRONZ (OIL-IMPREGNATED SINTERED BRONZE)
earings Section Contents OST-RONZ (OIL-IMPREGNTE SINTERE RONZE) General escription...136 137 Catalog Selections/imensions...138 144 ER-N-RONZ (660 CST RONZE) General escription...145 Catalog Selections/imensions...146
SECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this
DIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC. EVALUATION SUBJECT: KWIK BOLT TZ MASONRY ANCHORS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 687 (6) 699 04 www.icc es.org ESR 78 Reissued 07/018 This report is subject to renewal 07/019. DIVISION: 04 00 00 MASONRY
DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
INCH-POUND AN924 Rev 14 15 February 2018 SUPERSEDING AN924 Rev 13 14 April 20104 DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING Reinstated after 14 June 2012. Inactive for new design.
Hilti X-GR, X-GR RU, X-FCM grating fasteners. Securely fastened. In seconds! Hilti. Outperform. Outlast.
Securely fastened. In seconds! Hilti. Outperform. Outlast. Applications Fastening grating on steel structures for all types of facilities: refineries, chemical plants, offshore platforms, civil and industrial
DIVISION: METALS SECTION: METAL FASTENINGS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 247 Reissued 2/207 This report is subject to renewal 2/209. DIVISION: 05 00 00 METALS
CROMONIMET STEEL LIMITED
+91-8048076501 CROMONIMET STEEL LIMITED https://www.indiamart.com/cromonimetsteel/pdf1.html We are a well- known Manufacturer, Exporter, Supplier and Importer of Stainless Steel Round Bar / Pipes and Tubes,
Accessories / Screwlocks
3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1
Concrete Screw-Anchors
Screw-Anchors Screw-Anchor are a totally removable rotation setting, thread forming anchor, ideal for either temporary or permanent anchoring into substrates such as concrete, brick, hollow brick or block.
DIVISION: METALS SECTION: METAL FASTENINGS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 100 PLANO, TEXAS 75024
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-2347 Reissued 12/2015 This report is subject to renewal 12/2017. DIVISION: 05 00 00 METALS SECTION:
Bore Code 1 1/8" mm 121
/8" (2) Bore Model Number Model Number Code Leave blank if none desired D 2 X MR Metric M See pages.7,.3 &.34 Bore Code /8" 2 28.5mm 2 T Series HOW TO ORDER Sound limiters: Rod end -LF Includes PTFE. Under
Alloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
FEDERAL SPECIFICATION PLATING, CADMIUM (ELECTRODEPOSITED) PAGE 1 PAGE 2
INCH-POUND 17 March 2000 SUPERSEDING AMENDMENT 2 30 MAY 1995 FEDERAL SPECIFICATION PLATING, CADMIUM (ELECTRODEPOSITED) The General Services Administration has authorized the use of this amendment, which
Downloaded from
INCH-POUND 6 March 2000 SUPERSEEDING MIL-F-3922B 20 September 1963 DETAIL SPECIFICATION FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR This specification is approved for use by all departments
BOSHART INDUSTRIES Telephone: Toll Free: Fax:
0- Available in cast bronze or cast brass body and poppet NBR "O"-Ring Seal (Nitrile Buna-N) BRONZE OR BRASS CHECK VALVE BRONZE 7CV050 7CV075 7CV00 7CV25 7CV50 7CV200 7CV300 7CV400 9.34 2.88 8.26 28.62
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL SERIES 1 AND 2, BAYONET COUPLING
INCH-POUND 30 August 2013 SUPERSEDING 25 July 2012 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING Reactivated
DETAIL SPECIFICATION SHEET
INCH-POUND 4 May 2018 SUPERSEDING 6 March 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD
MANUFACTURER, IMPORTER AND DISTRIBUTOR FASTENERS, COMPONENTS AND SEALING DEVICES
MANUFACTURER, IMPORTER AND DISTRIBUTOR FASTENERS, COMPONENTS AND SEALING DEVICES Competitive Advantage Product Overview Manufacturing and Services People Diversity People. Leadership. Service. Westermann
J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
Copper Clad Steel (40%) Conductor Wire
Introduction Copper Clad Steel (CCS) is a composite conductor material containing a low carbon steel core surrounded by copper. The copper provides the electrical conductivity, and the steel contributes
Kapil Enterprises. Made in India. Kapil Enterprises
Kapil Enterprises Made in India Kapil Enterprises 330, EHTP, HSIDC kundli industrial area District Sonepat 131 028 Haryana State, India Email: sales@bigboltnut.com Telephones + 91 ( 130 ) 211 9061 Cell
HFX Adhesive Anchor Adhesive Anchoring Systems
HFX Adhesive Adhesive ing Systems MD300 Dispenser HFX-M Mixer HFX Cartridge Standard Silicon Dispenser Product Description Hilti HFX is a new hybrid adhesive mortar combining resin, hardener, cement and
Stainless Steel Seamless Tubing and Tube Support Systems
www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked
Downloaded from HighEnergyMetals.com
INCH-POUND MIL-DTL-24749A(SH) 21 August 1997 SUPERSEDING MIL-S-24749(SH) 13 August 1990 DETAIL SPECIFICATION GROUNDING STRAPS AND BOSSES, ELECTROMAGNETIC GENERAL SPECIFICATION FOR This specification is
PROJECT SUBMITTAL. Power-Stud TM. Wedge Expansion Anchor PROJECT SUBMITTAL CONTENTS APPROVALS AND LISTINGS
PROJECT SUBMITTAL Power-Stud TM Wedge Expansion Anchor Anchoring into Solid Concrete and Masonry Base Materials Anchor Diameter is the Same as the Hole Diameter Interlocking Clip Wedges Prevent Anchor
(800) (562) A Subsidiary of the International Code Council
ICC-ES Evaluation Report ESR-2089 Reissued September 2014 This report is subject to renewal September 2016. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
Precision Micro-Aperture Catalog
National Aperture, Inc. Precision Micro-Aperture Catalog Version 2009-1 PLEASE CONTACT: Dan Gentile Sales Associate, National Aperture, Inc. Telephone: (603) 893-7393, (800) 360-4598, Fax: (603) 893-7857
Copper-Nickel Products Copper-Nickel Tubing Fittings, Flanges, Sheet, Plate and Rod
Copper-Nickel Products Copper-Nickel Tubing Fittings, Flanges, Sheet, Plate and Rod ALASKAN COPPER WORKS ALASKAN COPPER & BRASS COMPANY C opper-nickel alloys are used in ship board and offshore drilling
Fig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
Water & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
SECTION COLD-FORMED METAL TRUSSES
SECTION 054400 COLD-FORMED METAL TRUSSES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
RSIC-DC04HD INSTALLATION GUIDE RSIC-DC04HD SOUND ISOLATION CLIP RSIC-DC04HD WOOD - STEEL - CONCRETE
RSIC-DC04HD INSTALLATION GUIDE RSIC-DC04HD SOUND ISOLATION CLIP RSIC-DC04HD WOOD - STEEL - CONCRETE RSIC-DC04HD SOUND ISOLATION CLIP RSIC-DC04HD Isolator Spacing and load: Maximum Acoustical Design Load:
Product data Dimensions. General information Material specifications. ➁ Threaded sleeve: S ➂ SN12-R washers: S 31635
X-BT stainless steel threaded studs Product data Dimensions X-BT W10-24-6 SN12-R X-BT M10-24-6 SN12-R 1 2 3 M10/ W10 24 [0.945"] 31.3 [1.232"] 4 X-BT W10-24-6-R X-BT M10-24-6-R 1 2 M10/ W10 26 [1.024"]
Installation. Resilmount A237R. Installation Instructions. Furring channel sound isolation clip
Resilmount A237R Furring channel sound isolation clip Installation Instructions Another Quality Building Product Installation A237R SPECIFICATIONS Width: 1-3/8 eight (including rubber): 1-1/16 Length:
Base Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water
Base Models: 1-22SV Base Models: 1-22SV F, P, R VERSIONS 1 Pump Body Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 2 Impeller Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 3 Diffuser
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412