Heatshrink & Cable Repair Solutions

Size: px
Start display at page:

Download "Heatshrink & Cable Repair Solutions"

Transcription

1

2 PAGE EASI-SHRINK HEATSHRINK SLEEVING ZERO-HALOGEN HEATSHRINK SLEEVING DR-25 HEATSHRINK TUBING KYNAR HIGH TEMPERATURE HEATSHRINK HEATSHRINK KITS ADHESIVE LINED HEATSHRINK SLEEVING WRAPAROUND HEATSHRINK REPAIR SLEEVE HEATSHRINK END CAPS HEATSHRINK BREAKOUT BOOTS HEATSHRINK SPLICES & TOOL HEATSHRINK GUNS PAGE

3 Easi- Heatshrink Sleeving B Easi- is a general purpose, heatshrinkable, flame retardant, self-extinguishing, flexible polyolefin tubing. Ideal for insulation, wire bundling and mechanical protection. Supplied in 14 standard sizes in 11 different colours. With a shrink ratio of 2:1, the range is suitable for bore sizes of 1.2mm to 101.6mm. 2:1 Flame Retardant Polyolefin Self-Extinguishing. COLOUR OPTIONS: Black, White, Brown, Red, Blue, Green/Yellow ( mm only) Grey, Clear, Yellow Green, Violet. OPERATING -40 C to +135 C DIELECTRIC STRENGTH: 20 MV/m SHRINK <100 C THERMAL HEAT AGEING: 168 hours-150, 4 Hours-200 C INSTALLATION 120 C LONGITUDINAL CHANGE: +5% to 10% FLAMMABILITY: Flame Retarded (colours, Fire Hazard: Burning of 60s. Max to ASTM D2671. CHEMICAL RESISTANCE: 23 C for 24 hours for Petrol H-515 Hydraulic Fluid, Lubricating Oil. STANDARDS: AMS-DTL-23053/5 CI 1 & 2, UL E107857, CSA PART NO. DIA. SIZE COIL LENGTHS SUITABLE FOR TRI-RATED CABLE mm 2 MIN ID SUPPLIED MAX ID WALL THICKNESS MIN. QTY HS HS HS HS / HS /1/1.5/ HS /4/ HS / HS /16/ HS /50/ HS / HS /185/ HS HS HS CUT TO ANY LENGTH. (MIN. ORDER QUANTITY OF 1 METRE) AVAILABLE COLOURS BLACK BLUE BROWN GREEN G/Y GREY CLEAR RED VIOLET WHITE YELLOW HOW TO ORDER: 1) Part No: HS ) Colour: Violet = HS 12.7 VIOLET 347

4 B Heatshrink & Cable Repair Solutions Easi- Heatshrink Sleeving in Boxes Easi- is a general purpose, heatshrinkable, flexible polyolefin tubing designed for commercial uses where cost is a important factor. Common uses include insulation, wire bundling and mechanical protection. Our range of heat shrinkable sleeving is supplied in conveniently packaged boxes in 10 different sizes. With a shrink ratio of 2:1, the range is suitable for bore sizes of 1.2mm to 25.4mm. 2:1 PART NO. DIA. SIZE LAY FLAT WIDTH SUITABLE FOR TRI-RATED CABLE mm 2 MIN ID SUPPLIED MAX ID WALL THICKNESS ESB N/A ESB N/A ESB N/A ESB / ESB /1/1.5/ ESB /4/ ESB / ESB /16/ ESB /50/ ESB / BOX QTY AVAILABLE COLOURS BLACK BLUE BROWN GREEN G/Y GREY CLEAR RED VIOLET WHITE YELLOW HOW TO ORDER: 1) Part No: ESB 1.6 2) Colour: Brown = ESB 1.6 BROWN 348

5 Easi- Halogen-Free Heatshrink Sleeving B Zero-Halogen heatshrink sleeving is a thin wall, non-halogen, flame retardant, heat shrinkable tubing. It has been specially developed for railway, transportation, marine, offshore and construction markets. Common applications include insulation, marking, strain relief, mechanical protection and colour coding. Low smoke, low toxicity and halogen-free. 2:1 PART NO. RA Rail Approved DIA. SIZE LSF Low Smoke & Fume COIL LENGTHS SUITABLE FOR TRI-RATED CABLE mm 2 Halogen-Free, Polyolefin COLOUR OPTIONS: INSTALLATION 120 C MIN. ID SUPPLIED MAX. ID Black, White, Brown, Red, Blue, Green, Green/Yellow, Grey, Clear, Yellow. LONGITUDINAL CHANGE: +5% to 10% DIELECTRIC STRENGTH: 15 kv/mm Min. THERMAL HEAT AGEING: FLAMMABILITY: 168 hours at 135 C, 4 hours at 175 C. Low Temperature Flexibility: 4 hours at -30 C. Fire hazard duration of burning 30s Max. to ASTM D876. Smoke Index 20 Max BS3G Annex B; Oxygen Index 32 Min. ISO 4569 BS 6853 Class 1 CHEMICAL RESISTANCE: 23 C for 24 hours for Aircraft Fuel, ISO1817, Test B, Hydraulic Fluid, ISO1817, Test B, Silicone Synthetic Fluid NATO S1714 STANDARDS: BR 1326A, UL E107857, CSA WALL THICKNESS MIN. QTY ZH-HS ZH-HS ZH-HS / ZH-HS /1/1.5/ ZH-HS /4/ ZH-HS / ZH-HS /16/ ZH-HS /50/ ZH-HS / ZH-HS /185/ ZH-HS AVAILABLE COLOURS CUT TO ANY LENGTH. (MIN. ORDER QUANTITY OF 1 METRE.) BLACK BLUE BROWN GREEN G/Y GREY CLEAR RED WHITE YELLOW HOW TO ORDER: 1) Part No: ZH-HS4.8 2) Colour: Brown = ZH-HS4.8 BROWN 349

6 B Heatshrink & Cable Repair Solutions Easi- Halogen-Free Heatshrink Sleeving in Boxes Zero-Halogen heatshrink sleeving is a thin wall, non-halogen, flame retardant, heat shrinkable tubing. It has been specially developed for railway, transportation, marine, offshore and construction markets. Common applications include insulation, marking, strain relief, mechanical protection and colour coding. Low smoke, low toxicity and halogen-free. Our range of heat shrinkable sleeving is supplied in conveniently packaged boxes in 10 different sizes. With a shrink ratio of 2:1, the range is suitable for bore sizes of 1.6mm to 25.4mm. 2:1 RA Rail Approved LSF Low Smoke & Fume PART NO. DIA. SIZE LAY FLAT WIDTH SUITABLE FOR TRI-RATED CABLE mm 2 MIN ID SUPPLIED MAX ID WALL THICKNESS ZH-ESB N/A ZH-ESB N/A ZH-ESB / ZH-ESB /1/1.5/ ZH-ESB /4/ ZH-ESB / ZH-ESB /16/ ZH-ESB /50/ ZH-ESB / BOX QTY AVAILABLE COLOURS BLACK BLUE BROWN GREEN G/Y GREY CLEAR RED WHITE YELLOW HOW TO ORDER: 1) Part No: ZH-ESB 1.6 2) Colour: Brown = ZH-ESB 1.6 BROWN 350

7 DR-25 Heatshrink Tubing C DR-25 heatshrinkable tubing is made from a flexible radiation cross-linked elastomeric material, special formulated for optimum resistance to fluids at high temperature and long term exposure to heat. Ideally suited for protecting high performance wiring harnesses against aviation fuels, diesel fuel, hydraulic fluids and lubricating oils. It has a 2:1 expansion ratio, excellent chemical and solvent resistance, abrasion and mechanical protection. PART NO. COLOUR SIZE 2:1 FULLY INSIDE DIA. COLOUR OPTIONS: OPERATING Flexible Cross-Linked Elastomeric. Black SHRINK 175 C : RA HF Halogen Free Rail Approved WALL THICKNESS -75 C to +150 C MIL-DTL-23053/16 (except 1/8 & 3/16); Def Stan Issue 3 Type 6B; VG Part 5 Type D, BS 3G-198 Part 3 10A, RK-8006 & RT High Temperature REEL SIZE MIN. QTY DR25-HS 3.2 BLK Black DR25-HS 4.8 BLK Black DR25-HS 6.4 BLK Black DR25-HS 9.5 BLK Black DR25-HS 12.7 BLK Black DR25-HS 19.0 BLK Black DR25-HS 25.4 BLK Black CUT TO ANY LENGTH. (MIN. ORDER QUANTITY OF 1 METRE.) C 351

8 C Heatshrink & Cable Repair Solutions Kynar High Temperature Heatshrink Sleeving Kynar heat shrinkable polyvinylidene fluoride sleeving is a thin wall material that has an appreciably higher working temperature than the standard heat shrinkable polyolefin materials. It has a high tensile strength and good resistance to chemicals and solvents. Its uses include strain relief, abrasion resistance and a tough protector. Ideal for use in hostile environments. PART NO. COLOUR INSIDE DIA. (Inches) INSIDE DIA. 2:1 OPERATING SHRINK 175 C SHRINK RATIO: 2:1 Polyvinylidene Fluoride. Highly Flame Retardant and able to withstand abrasion and cut-through. -55 C to +175 C DIELECTRIC STRENGTH: 32kV/mm IEC 243 TENSILE STRENGTH: 35 N/mm 2 ISO 37 ELONGATION AT BREAK: 150% ISO 37 LONGITUDINAL CHANGE: LOW TEMPERATURE FLEX: HEAT SHOCK 4H NO CRACKING: FLAMMABILITY: : FULLY INSIDE DIA. 10% Max ASTM D C ASTM D C ASTM D2671 Flame Retarded UL224 VW1 UL224 VW1/CSA, Def Stan 59/57 Type 3, MIL /8, VG Part 5 Type F, VDE 0341/PT 9005; RoHS. WALL THICKNESS LENGTH KYN-HS 1.2 Clear 3/ KYN-HS 1.6 Clear 1/ KYN-HS 2.4 Clear 3/ KYN-HS 3.2 Clear 1/ KYN-HS 4.8 Clear 3/ KYN-HS 6.4 Clear 1/ KYN-HS 9.5 Clear 3/ KYN-HS 12.7 Clear 1/ KYN-HS 19.1 Clear 3/ KYN-HS 25.4 Clear High Temperature C 352

9 Heatshrink Kits C HSK 1 Pre-cut lengths of heatshrink tubing complete with case. 2:1 shrink ratio. The sleeving is UL approved and RoHS Compliant. KIT CONTENTS 10 Pieces x Black, Blue, Brown, Grey, Yellow/Green. Size: 2.5/1.25 x 100mm. PART NO. HSK1 DESCRIPTION Heatshrink Kit with 2:1 5 Pieces x Black, Blue, Brown, Grey, Yellow/Green. Size: 5/2.5 x 100mm. 4 Pieces x Black, Blue, Brown, Grey, Yellow/Green & White. Size: 10/5 x 100mm 10 Pieces x Black, Blue, Brown, Grey, Yellow/Green. Size: 3/1.5 x 100mm. 5 Pieces x Black, Blue, Brown, Grey, Yellow/Green. Size: 6/3 x 100mm. 4 Pieces x Black, Blue, Brown, Grey and White. Size: 13/6.5 x 100mm. HSK 2 Adhesive-lined heatshrink with 3:1 shrink ratio. Ideal for use where cables need protecting from moisture and water. The sleeving is UL approved and RoHS Compliant. KIT CONTENTS 24 x Black and 6 x Red Size: 3/1 x 100mm. PART NO. HSK2 DESCRIPTION Heatshrink Kit with 3:1 9 x Black and 3 x Red Size: 9/3 x 100mm. 3 x Black and 1 x Red Size: 19/6 x 100mm. 12 x Black and 4 x Red Size: 6/2 x 100mm. 4 x Black and 2 x Red Size: 12/4 x 100mm. 2 x Black Size: 24/8 x 100mm. HSK 3 Pre-cut lengths of heatshrink tubing complete with case. 2:1 shrink ratio. The sleeving is UL approved and RoHS Compliant. KIT CONTENTS 10 Pieces x Black, Red, Yellow, Blue and Green. Size: 1.5/0.75 x 100mm. PART NO. HSK3 DESCRIPTION Heatshrink Kit with 2:1 10 Pieces x Black, Red, Yellow, Blue and Green. Size: 3/1.5 x 100mm. 5 Pieces x Black, Red, Yellow, Blue and Green. Size: 6/3 x 100mm. 10 Pieces x Black, Red, Yellow, Blue and Green. Size: 2.5/1.25 x 100mm. 5 Pieces x Black, Red, Yellow, Blue and Green. Size: 5/2.5 x 100mm. 5 Pieces x Black, Red, Yellow, Blue and Green. Size: 10/5 x 100mm. 353

10 Sizing Chart for Selecting Heatshrink for Copper Bar COPPER BAR SIZE (Inches) CIRCUMFERENCE (Inches) CIRCUMFERENCE DIAMETER 1/4 x 1/ RECOMMENDED HEATSHRINK HS /8 x 1/4 2 1/ x 1/8 2 1/ x 1/4 2 1/ HS /4 1/ /2 x 1/4 3 1/ /2 x 1/ /4 x 1/ HS x 1/4 4 1/ x 1/ /2 x 1/4 5 1/ HS x 1/4 6 1/ x 1/ /2 x 1/4 7 1/ /2 x 1/ x 1/4 8 1/ x 1/ HS /2 x 1/4 9 1/ /2 x 1/ x 1/4 10 1/ x 1/ HS

11 Adhesive Lined Heatshrink 3:1 - Thin Wall C Comprising of a dual wall flexible flame retardant polyolefin tubing and an inner liner of hot melt adhesive, this tubing is ideal for waterproof sealing and encapsulation of harnesses and other electrical components. Its high shrink ratio of 3:1 makes for an extremely easy installation. PART NO. COLOUR SIZE 3:1 MIN. DIA. SUPPLIED COLOUR OPTIONS: INSTALLATION MAX. DIA. Flame Retardant Polyolefin Black, Clear or Red. 110 C LONGITUDINAL CHANGE: 0% to 15% DIELECTRIC STRENGTH: 12kV/mm minimum THERMAL HEAT AGEING: 168 hours at 150 C, 4 hours at 225 C; Low Temperature Flexibility - 4 hours at -55 C FLAME RETARDANCY: Rated at 600V, it meets the VWI flame retardancy test in accordance with UL 224. FLAMMABILITY: Fire hazard duration of burning 60s max. to ASTM D2671 (jacket only, not including transparent). CHEMICAL RESISTANCE: Fluid resistance at 23 C for 24 hours for the following fluids: F-54 diesel fluid, H-515 hydraulic fluid, lubricating oil. WALL THICKNESS LENGTH ADHESIVE LINED HEATSHRINK 3:1 - BLACK HSAL3/1BLK Black 3/ HSAL4.8/1.5BLK Black 4.5/ HSAL6/2BLK Black 6/ HSAL9/3BLK Black 9/ HSAL12/4BLK Black 12/ HSAL19/6BLK Black 19/ HSAL24/8BLK Black 24/ HSAL40/13BLK Black 40/

12 C Heatshrink & Cable Repair Solutions Adhesive Lined Heatshrink 3:1 - Thin Wall PART NO. COLOUR SIZE ADHESIVE LINED HEATSHRINK 3:1 - CLEAR HSAL3/1C Clear 3/ HSAL4.8/1.5C Clear 4.5/ HSAL6/2C Clear 6/ HSAL9/3C Clear 9/ HSAL12/4C Clear 12/ HSAL19/6C Clear 19/ HSAL24/8C Clear 24/ HSAL40/13C Clear 40/ ADHESIVE LINED HEATSHRINK 3:1 - RED MIN. DIA. SUPPLIED MAX. DIA. WALL THICKNESS HSAL3/1RED Red 3/ HSAL4.8/1.5RED Red 4.5/ HSAL6/2RED Red 6/ HSAL9/3RED Red 9/ HSAL12/4RED Red 12/ HSAL19/6RED Red 19/ HSAL24/8RED Red 24/ HSAL40/13RED Red 40/ :1 LENGTH 356

13 Adhesive Lined Heatshrink 3:1 - Medium Wall C This adhesive lined heatshrink, with a medium wall has a 3:1 shrink ratio. It accommodates a wide variety of connector shapes and configurations up to 350mm diameter. Typical applications include strain relief and cable protection, installation cover or jacket repair on low voltage cables, and splice covers for electrical cables. PART NO. COLOUR MIN. DIA. SUPPLIED COLOUR OPTIONS: OPERATING Flame Retardant Polyolefin UL94-V0 Black SHRINK 120 C LONGITUDINAL CHANGE: -55 C to +110 C +1% to 10% Max. DIELECTRIC STRENGTH: 20 kv/mm Min. THERMAL HEAT 168 hours at 150 C - 500%; AGEING: Low Temperature Flexibility FLAMMABILITY: Fire hazard duration of burning 60s max. to ASTM D2671 (jacket only, not including transparent). CHEMICAL RESISTANCE: Fluid resistance at 23 C for 24 hours for the following fluids: F-54 diesel fluid, 3:1 MAX. DIA. H-515 hydraulic fluid, lubricating oil. WALL THICKNESS LENGTH MW-HSAL10/4 Black MW-HSAL19/6 Black MW-HSAL25/8 Black MW-HSAL28/9 Black MW-HSAL33/10 Black MW-HSAL38/12 Black MW-HSAL43/12 Black MW-HSAL52/19 Black MW-HSAL70/25 Black MW-HSAL90/30 Black MW-HSAL120/40 Black MW-HSAL152/48 Black MW-HSAL170/58 Black MW-HSAL230/77 Black MW-HSAL265/85 Black MW-HSAL300/100 Black MW-HSAL350/150 Black

14 C Heatshrink & Cable Repair Solutions Adhesive Lined Heatshrink 6:1 - Medium Wall This adhesive lined heatshrink has a 6:1 shrink ratio and accommodates a wide variety of connector shapes and configurations. The thermoplastic adhesive liner is ideal for complete environmental protection and insulation. Ideal for use for strain relief and protection of cables. PART NO. COLOUR MIN. DIA. SUPPLIED 6:1 COLOUR OPTIONS: OPERATING TENSILE STRENGTH: MAX. DIA. Flame Retardant Polyolefin UL94-V0 Black -55 C to +110 C 14.5 MPa SHRINK 120 C LONGITUDINAL CHANGE: +1% to 10% Max. DIELECTRIC STRENGTH: 20 kv/mm Min. THERMAL HEAT 168 hours at 150 C - 400%; AGEING: Low Temperature Flexibility; No Break at -55 C. WALL THICKNESS LENGTH MW-6:1 HSAL19/3.2 Black MW-6:1 HSAL33/5.5 Black MW-6:1 HSAL45/7.4 Black MW-6:1 HSAL51/8.3 Black MW-6:1 HSAL70/11.7 Black FLAMMABILITY: Fire hazard duration of burning 60s max. to ASTM D2671 (jacket only, not including transparent). CHEMICAL RESISTANCE: Fluid resistance at 23 C for 24 hours for the following fluids: F-54 diesel fluid, H-515 hydraulic fluid, lubricating oil. MW-6:1 HSAL89/17 Black MW-6:1 HSAL120/23 Black

15 Heatshrink Repair Sleeve: Wraparound C Heatshrink wraparound sleeves are manufactured from cross-linked polyolefin. The hot melt adhesive inner lining, which melts during shrinking, solidifies to form a permanent seal. This rail-less design provides simple installation with clamshell design. The high shrink ratio covers irregular shapes. Can be easily installed in cable insulation repair and splice applications and provides excellent insulation and protection for cable jackets. Meets ICEA and NEMA insulation thickness specifications. NATO stock number accredited. Cross-Linked Polyolefin COLOUR OPTIONS: OPERATING Black SHRINK 120 C TENSILE STRENGTH: -55 C to +110 C 19 MPa ELONGATION: 600% HEAT SHOCK: 4 Hours at 225 C No cracking or flowing. DIELECTRIC STRENGTH: 28 kv/mm Min. CHEMICAL RESISTANCE: Good resistance to hydraulic fluid, lubricating oil, and diesel fuel. 3:1 HF Halogen Free PART NO. MIN. ID SUPPLIED MAX. ID WALL THICKNESS LENGTH CRLS CRLS CRLS CRLS CRLS CRLS

16 C Heatshrink & Cable Repair Solutions Heatshrink Repair Sleeve: Wraparound with Stainless Steel Rail Adhesive lined, heatshrink wraparound sleeve comes complete with a flexible stainless-steel locking channel. This provides a permanent closure system. The heatshrink is covered with a thermochromatic paint which changes colour when achieving the correct shrink temperature. Wraparound heatshrink is easy to install in situ over live cable without cutting the cable or shutting down power. Used for general re-jacketing and sealing applications, and for protection of damaged cable or repair of cable joints. PART NO. 3:1 MIN. ID SUPPLIED HF Halogen Free Cross-Linked Polyolefin COLOUR OPTIONS: OPERATING Black SHRINK 120 C TENSILE STRENGTH: ELONGATION: -30 C to +70 C 17 MPa 350% Min. TENSILE STRENGTH AFTER HEAT AGEING: 168 Hours at 150 C 14 MPa ELONGATION AFTER HEAT AGEING: CARBON BLACK CONTENT FOR UV RESISTANCE: LOW TEMPERATURE FLEXIBILITY: LONGITUDINAL SHRINKAGE: MAX. ID 168 Hours at 150 C 300% Min. 2% Min. No Cracking at -40 C 10% Max. WALL THICKNESS LENGTH CRDW 43/8-1M CRDW 75/15-1M CRDW 93/25-1M CRDW 137/34-1M CRDW 200/48-1M

17 Heatshrink End Caps C Heatshrink end caps are manufactured from a polyolefin material and coated with a hot melt adhesive. This provides a water tight seal against the damage of moisture, dirt or corrosion. The rugged wall of these end caps also offers excellent resistance against abrasion. Suitable for use on polymeric and paper insulated, lead jacketed cables. PART NO. MIN. ID SUPPLIED 2:1 MAX. ID Cross-Linked Polyolefin COLOUR OPTIONS: OPERATING Black SHRINK 120 C -55 C to +100 C LONGITUDINAL CHANGE: +5% to 10% DIELECTRIC STRENGTH: 20 kv/mm Min. THERMAL HEAT AGEING: PERFORMANCE: 168 hours at 150 C, 4 hours at 200 C; Low temperature flexibility 4 hours at -30 C. Will provide a seal at up to 0.05 MPa internal pressure whilst operating between -30 C to +70 C. CHEMICAL RESISTANCE: Good chemical and solvent resistance. HF Halogen Free WALL THICKNESS LENGTH PACK QTY PLC 10/ PLC 15/ PLC 20/ PLC 35/ PLC 55/ PLC 75/ PLC 100/ PLC 120/ PLC 148/ PLC 160/

18 C Heatshrink & Cable Repair Solutions Heatshrink Breakout Boots Heatshrink breakout boots are made of tough, crosslinked polyolefin to provide good mechanical protection and strain relief. CCB breakout boots have an adhesive coating inside the body and the legs to form a durable watertight seal, and shrink tightly to conduits and cable jackets. Ideal for use on poly or elastometric insulated/jacketed multiconductor cables or cables in metal or plastic conduits. Cross-Linked Polyolefin COLOUR OPTIONS: OPERATING Black SHRINK 135 C TENSILE STRENGTH: ELONGATION: TENSILE STRENGTH AFTER THERMAL AGEING: ELONGATION AFTER THERMAL AGEING: -55 C to +100 C 10 MPa Min. 300% Min. 168 Hours at 120 C 9 MPa Min. 168 Hours at 120 C 250% Min. DIELECTRIC STRENGTH: 12 kv/mm 2:1 PART NO. DESCRIPTION BREAKOUT DIA. FLAMMABILITY: Non Flame Retardant STANDARDS: Meets ESI HF Halogen Free FINGER DIA. PACK QTY CCB2 33/10 33/14 10/3 1 Two Core CCB2 50/21 50/23 21/7.5 1 CCB3 38/11 38/14 11/4 1 CCB3 60/24 60/22 24/8 1 CCB3 80/36 Three Core 80/33 36/16 1 CCB3 100/48 100/47 48/20 1 CCB3 125/55 125/47 55/20 1 CCB4 38/11 38/14 11/4 1 CCB4 55/20 55/20 20/8.5 1 CCB4 72/25 Four Core 72/22 25/8.5 1 CCB4 100/35 100/35 35/14 1 CCB4 125/45 125/47 45/

19 Heatshrink Splices B Heat shrinkable splices provide a long lasting environmental seal. They are made of a butt connector forming one piece covered with a cut piece of adhesive heatshrink tube. The polymer used in the production of the heatshrink tube is specially adapted to be crimped. Easy to use, these splices satisfy the requirements of industry for rugged applications such as motor vehicle, outdoor electrical and marine electrical wiring, as well as maintenance and electrical equipment repair. The heatshrink splices are colour coded for an easy selection of correct wire gauge size 0.5mm 2 to 6.0mm 2. Polymer OPERATING MIN. SHRINK TENSILE STRENGTH: -55 C to +105 C 150 C 22.5 MPa DIELECTRIC STRENGTH: 20 kv/mm Min. ELONGATION AT BREAK: 553% HEAT SHOCKS: HEAT AGEING: 4 Hours at 225 C No cracking DIELECTRIC STRENGTH: 12 kv/mm 168 Hours at 175 C No crack, flowing or dipping of outer wall. CHEMICAL RESISTANCE: Fluid Resistance 23 C x 24 Hours - Good. DIMENSIONS WIRE Ø mm 2 PART NO. L F d D PACK QTY RED BLUE 4-6 YELLOW CHSB CHSB CHSB HEATSHRINK SPLICE CRIMP TOOL: CRT 123B This budget range crimp tool with a single cast multi-die head is suitable for heatshrink splices from 0.5mm 2-6.0mm 2 and is also suitable for automotive and contracting applications. PART NO. TOOL LENGTH mm SIZE mm 2 CRT 123B

20 E Heatshrink & Cable Repair Solutions Heatshrink Guns HEATSHRINK GUN This mulit-purpose heat gun has three heating and airflow stages. With up to 1800 watts of power, the blower reaches a temperature of up to 600 C at an airflow rate of 500 l/mm. Temperature and airflow can be adjusted in 3 stages at the operating switch: 200 l/mm: 50 C; 300 l/mm: 400 C; 500 l/mm: 600 C. Cool air stage for rapid cooling on changing nozzles. DIMENSIONS (LxWxH): 260 x 90 x 205 mm OUTPUT: VOLTAGE: TEMPERATURE SETTING: WEIGHT: 1300W - 110V 1800W - 240V V, 50 Hz 3 Stage 780 g PART NO. 1810S-110V 1810S-240V NOZZLE A NOZZLE B DESCRIPTION 110 Voltage Gun 240 Voltage Gun Surface Nozzle Reflector Nozzle NOZZLE A NOZZLE B Nozzle A is a Surface Nozzle which spreads air over small areas. Nozzle B is a reflector Nozzle for soldering and shrink fitting sleeve and heatshrink on tubing. MINI-HEATSHRINK GUN The Iroda flame less heat gun has a Piezo electronic self-starting ignition system. Powered by the refill cell of a disposable lighter. Windproof flame and waterproof ignition. Handy compact size and easy to use. Uses Butane fuel (not included). DIMENSIONS: 115 x 80 x 25 mm HEAT Up to 650 C WEIGHT: 95 g PART NO. IRODA DESCRIPTION Mini-Heatshrink Gun 364

Protect. Heatshrink and cable repair solutions

Protect. Heatshrink and cable repair solutions Protect Heatshrink and cable repair solutions 316 A premium selection of heatshink sleevings and cable repair products including moisture barrier kits, heatshrink repair sleeves, end caps and breakout

More information

Heatshrink and cable repair solutions

Heatshrink and cable repair solutions Protect Heatshrink and cable repair solutions A premium selection of cable repair solutions incorporating insulated sleeving, heatshink sleeving, cable jointing and heatshrink repair solutions including

More information

Shrink-Kon Thin Wall Heat Shrinkable Tubing

Shrink-Kon Thin Wall Heat Shrinkable Tubing Shrink Ratio 2:1 Shrink-Kon Thin Wall Tubing Styles 2:1 Shrink Ratio, Non-Lined Flame retardant. Resistant to common fluids and solvents. Meets UL 224, 125 C; CSA C22.2 No. 198.1, 125 C; MIL-DTL-23053/5

More information

Heavy Wall Heat Shrinkable Tubing 5-7. Flame Retardant Heavy Wall Heat Shrinkable Tubing 8. Heat Shrinkable Ends Caps 9

Heavy Wall Heat Shrinkable Tubing 5-7. Flame Retardant Heavy Wall Heat Shrinkable Tubing 8. Heat Shrinkable Ends Caps 9 Heavy Wall Heat Shrinkable Tubing 5-7 Flame Retardant Heavy Wall Heat Shrinkable Tubing 8 Heat Shrinkable Ends Caps 9 Heat Shrinkable Breakout Boots 10 Shrink Ratio 3:1 Shrink-Kon Heavy Wall Heat Shrinkable

More information

Data Sheet Flexible Polyolefin Heatshrink Tubing 3:1

Data Sheet Flexible Polyolefin Heatshrink Tubing 3:1 RS Stock No.700-4453 RS Stock No.700-4456 RS Stock No.700-4450 Data Sheet Flexible Polyolefin Heatshrink Tubing 3:1 Applications Designed to provide specially expansion ratio for applications of military

More information

Protective Tubing. Comprehensive range of HEAT-SHRINKABLE and COLD APPLIED TUBING

Protective Tubing. Comprehensive range of HEAT-SHRINKABLE and COLD APPLIED TUBING INTRODUCTION Comprehensive range of HEAT-SHRINKABLE and COLD APPLIED TUBING Performance tubing for extreme environments and commercial applications Heat-shrinkable tubing is available in an extensive range

More information

Heat-Shrinkable Tubing

Heat-Shrinkable Tubing CPO 2:1 Shrink Ratio Thin-Wall Tubing, Non-Lined Flame-retardant, cross-linked polyolefin Continuous operating temperature: -55 C to 135 C Shrink temperature of 120 C Meets UL and CSA standards; MIL-DTL-23053/5

More information

Shinn Thon UK Ltd 1 st Floor, 223 Dalton Road, Barrow in Furness, Cumbria. LA14 1PQ Tel: Fax:

Shinn Thon UK Ltd 1 st Floor, 223 Dalton Road, Barrow in Furness, Cumbria. LA14 1PQ Tel: Fax: I. Single Wall Tubing (Thin Wall) (Product No. : W-1-PT) 1.General Description: Flexible, Flame-Retardant, General Purpose, Polyolefin Tubing Product Facts 1) 2:1 & 3:1 shrink ratio; 2) Super abrasion

More information

Termco Heatshrink.

Termco Heatshrink. Termco Heatshrink Thin Wall Tubing (Flame Retardant) Clear Thin Wall Tubing Green/Yellow Thin Wall Tubing Dual Wall Tubing Medium Wall Tubing Cable End Caps Heat Shrink Miniature End Cap Heat Shrinkable

More information

Flame-retardant, cross-linked polyolefin. Shrink temperature of 120 C. Cat. No.*

Flame-retardant, cross-linked polyolefin. Shrink temperature of 120 C. Cat. No.* 2:1 Shrink Ratio CPO Series Thin-Wall Tubing, Non-Lined CATALOGUE NUMBER CONSTRUCTION Final Series Colour ft Order No. CPO63 + 0 + C = CPO63-0-C Available Colours 0 Black 5 Green C Clear 6 Blue 2 Red 9

More information

FP30112WHITE100 Heat Shrink TW Tubing 100' Spool

FP30112WHITE100 Heat Shrink TW Tubing 100' Spool FP30112WHITE100 Heat Shrink TW Tubing Minnesota Mining (3M) Catalog Number FP30112WHITE100 Manufacturer Minnesota Mining (3M) Description Tubing, Heat; ; 600 V; Cable Size 1/2 Inch; Thin Wall; Shrink Temperature

More information

Low Voltage Live Pot End Kits

Low Voltage Live Pot End Kits Low Voltage Live Pot End Kits Standard heat shrink end caps are often used to seal cable ends. However where cables are live, heat shrink live pot end kits should be used. Each core is separately sealed

More information

Protection of A/C connection using a heat shrinkable jacket

Protection of A/C connection using a heat shrinkable jacket Protection of A/C connection using a heat shrinkable jacket 1. Position the heat-shrinkable jacket after the cutting, deburring, inserting of standardized brass nut and flaring operations. 2. Connect the

More information

Halogen Free Environmentally Friendly Heat Shrinkable Wire Identification Sleeves

Halogen Free Environmentally Friendly Heat Shrinkable Wire Identification Sleeves MSVLU MSVLU(C) Halogen Free Environmentally Friendly Heat Shrinkable Wire Identification Sleeves Description MSVLU series is halogen free, environmentally friendly, heat shrinkable identification sleeves.

More information

UL RATED HEAT SHRINK TUBING

UL RATED HEAT SHRINK TUBING UL RATED HEAT SHRINK TUBING POLYOLEFIN SINGLE WALL TUBING POLYOLEFIN DUAL WALL TUBING www.heatshrinkdirect.net CB-HFT(600) UL/CUL NON-ADHESIVE HEAT SHRINKABLE TUBING CB-HFT(600) is UL/CUL rated halogen-free,

More information

Heat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application.

Heat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application. 2.1 Insulation Products Technical Information Heat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application. Begin your search in the flow

More information

4Molded Parts. Molded Parts. Table of Contents

4Molded Parts. Molded Parts. Table of Contents Molded Parts Table of Contents Overview 4-2 General Information 4-3, 4-4 Selection Tables 4-5, 4-6 Part Numbering System 4-7 Visual Selection Guide 4-8 to 4-20 Boot Adapter Selection Tables 4-21 to 4-23

More information

3.1 Heat shrinkable tubing 3.2 Braided sleeving

3.1 Heat shrinkable tubing 3.2 Braided sleeving Protection 3 Page 3.1 Heat shrink tubing selection guide 144 Application overview heat shrinkable tubing 146 The right heat shrink tube 147 TCN20, 2:1, fast shrinkable, self-extinguishing 148 TCN20, 3:1,

More information

This selection guide will help you to find the correct moulded shape for your application: P ± 10% R ± 15% 11.6 (.45 ) (4.13 ) (4.

This selection guide will help you to find the correct moulded shape for your application: P ± 10% R ± 15% 11.6 (.45 ) (4.13 ) (4. Selection Guide This selection guide will help you to find the correct moulded shape for your application: Step 1. Product Style Use the Selection Guide Overview on page 12 to quickly select a suitable

More information

Rail Wire Guide. Harnessing and Electro-Mechanical Solutions for Demanding, Harsh Environment Applications... LFH FREE

Rail Wire Guide. Harnessing and Electro-Mechanical Solutions for Demanding, Harsh Environment Applications... LFH FREE Harnessing and Electro-Mechanical Solutions for Demanding, Harsh Environment Applications... Railway Market: 100E Wire ZHPCG Cable SHF260 Flexible Cable Rail Wire Guide LFH Low Fire Hazard HALOGEN FREE

More information

AMS-Military Grade Heat Shrinkable Wire Identification Sleeves

AMS-Military Grade Heat Shrinkable Wire Identification Sleeves MS-VLA MS-VLA(C) AMS-Military Grade Heat Shrinkable Wire Identification Sleeves Description MSVLA series is the military grade cable and wire identification sleeves, which is made of cross-linked environmentally

More information

1Heat-shrinkable Tubing

1Heat-shrinkable Tubing SCL Semirigid, Encapsulant-Lined, Polyolefin Tubing Product Facts 3:1 shrink ratio Splash-resistant, moistureresistant covering; not intended for use where immersion in fluids is required Rugged protection

More information

ES2000 TUBING Environmental Sealing, Polyolefin, Semirigid, Adhesive-Lined

ES2000 TUBING Environmental Sealing, Polyolefin, Semirigid, Adhesive-Lined Tyco Electronics Corporation 305 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing SPECIFICATION: THIS ISSUE: DATE: REPLACES: RT-1112 Issue 5 April 22, 2008 Issue 4 ES2000 TUBING Environmental

More information

Applications. Features

Applications. Features GSHS 1625 FLEXIBLE, FLAMERETARDANT POLYOLEFIN 600V, 125 O C, 2:1 Applications GSHS1625 is a flexible, flameretardant heat shrinkable polyolefin tube. It is designed for a vide range of application including

More information

Routing, Protection and Insulation. Heat Shrink Tubing. Protection and insulation of wires and cables

Routing, Protection and Insulation. Heat Shrink Tubing. Protection and insulation of wires and cables Routing, Protection and Insulation Heat Shrink Tubing Protection and insulation of wires and cables Heat Shrink Tubing Heat shrink tubing is an excellent solution for providing strain relief, insulation

More information

insulate Seal Protect Single Wall ProductS

insulate Seal Protect Single Wall ProductS In s u l at e Se a l Pr o t e c t Single Wall Products Table of Contents Single Wall Products CHM 140...3 Semi-rigid tubing CPX 100...5 Flexible, multi-purpose tubing CPX 201...7 Flexible, colour coded

More information

TAT-125-3/16-0-STK Product Details

TAT-125-3/16-0-STK Product Details TE Connectivity My Cart My Part Lists Sign In/Register English (Change) What can we help you find? Products Industries Resources About TE My Account Innovation Support Center TAT-125-3/16-0-STK Product

More information

TTMS MARKER SYSTEM TTMS

TTMS MARKER SYSTEM TTMS RW 2517 Revision 2 Page 1 of 7 Date Printed 29Apr10 Tyco Electronics Cheney Manor, Swindon. UK SPECIFICATION: RW 2517 THIS ISSUE: ISSUE 2 DATE: 08 September 2009 REPLACES: RW 2517 ISSUE 1 TTMS MARKER SYSTEM

More information

VERSAFIT-1/2-KT2-REFILL Product Details

VERSAFIT-1/2-KT2-REFILL Product Details TE Connectivity My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My

More information

SafeX110 Single Core Flexible Tinned Copper Cable

SafeX110 Single Core Flexible Tinned Copper Cable LSZH 110 C Flexible SafeX110 Single Core Flexible Tinned Copper Cable Application: Wiring of switchboards, control, general wiring, instrumentation and communication systems. Used where low smoke, zero

More information

RAYCHEM TAT-125 ADHESIVE LINED TUBING Polyolefin, Flexible, Heat-Shrinkable, Dual Wall

RAYCHEM TAT-125 ADHESIVE LINED TUBING Polyolefin, Flexible, Heat-Shrinkable, Dual Wall Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-3032 Issue 1 June 9, 2004 RAYCHEM TAT-125 ADHESIVE LINED TUBING Polyolefin, Flexible,

More information

Hongshang Heat Shrinkable Materials Co., Ltd Issue No.9 Qilin Rd, Nankeng Cun, Bantian, Longgang, Shenzhen Date TECHNICAL REPORT ON

Hongshang Heat Shrinkable Materials Co., Ltd Issue No.9 Qilin Rd, Nankeng Cun, Bantian, Longgang, Shenzhen Date TECHNICAL REPORT ON Spec.H-2 (3X) Issue 2011 Page 1 /5 Hongshang Hongshang Heat Shrinkable Materials Co., Ltd Issue 2011 No.9 Qilin Rd, Nankeng Cun, Bantian, Longgang, Shenzhen Date 2011-9-7 China, 518129 Spec. H-2 (3X) TECHNICAL

More information

Section 14. Shrink & Non-Shrink Tubing

Section 14. Shrink & Non-Shrink Tubing Section 14. 253 Table of Contents PVC...256 HS-101...256 HS-105...257 HS-105 x.032...258 4900...259 4900 X.032...260 TE Connectivity...261 Single Wall RNF-100...261 RNF-150...262 Versafit...263 Versafit

More information

Raychem Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable

Raychem Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-3037 Issue 2 July 26, 2006 Issue 1 Raychem Fluoroelastomer Tubing Flexible, Fluid

More information

YF /8" YF /2" YF /4"

YF /8 YF /2 YF /4 Wire Over-Braided Flexible Conduit ( YF-705 ) most suitable for demanding industrial wiring applications. *Galvanized steel helically wound with PVC coating and wire over-braid. *Trade size: 3/8"~2" (square

More information

ELECTRICAL SOLUTIONS

ELECTRICAL SOLUTIONS Ties HSTTP PVC Heat Shrink Applications include insulating and protecting wires and cables Good resistance to most fuels and oils Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized, CSA Certified

More information

Raychem RT-555 TUBING Modified Fluoropolymer, Radiation Crosslinked, Flexible, Abrasion Resistant, Flame Retardant, Heat Shrinkable

Raychem RT-555 TUBING Modified Fluoropolymer, Radiation Crosslinked, Flexible, Abrasion Resistant, Flame Retardant, Heat Shrinkable TE Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Specification This Issue: Date: Replaces: RT-555 Issue 7 29-Apr-14 Issue 6 Raychem RT-555 TUBING Modified Fluoropolymer, Radiation

More information

Thermofit MIL-LT Tubing Low Shrink-Temperature Polyolefin, Flexible, Heat-Shrinkable

Thermofit MIL-LT Tubing Low Shrink-Temperature Polyolefin, Flexible, Heat-Shrinkable Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1171 Issue 7 December 5, 2001 Issue 6 Thermofit MIL-LT Tubing Low Shrink-Temperature

More information

RAYCHEM NT-MIL TUBING Modified Chlorinated Polyolefin, Elastomeric, Flexible, Flame Retarded, Heat Shrinkable

RAYCHEM NT-MIL TUBING Modified Chlorinated Polyolefin, Elastomeric, Flexible, Flame Retarded, Heat Shrinkable Tyco Electronics Corporation 305 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-3030 Issue 3 16-Jun-15 Issue 2 RAYCHEM NT-MIL TUBING Modified Chlorinated Polyolefin,

More information

Heat-Shrinkable Tubing

Heat-Shrinkable Tubing Table of Contents Note: Users should independently evaluate the suitability of the product for their application. Before ordering, check with Tyco Electronics for most current data. Overview.....................................................3-3

More information

Article-No. Type. All dimensions in mm. Subject to technical changes. Other dimensions, reel lengths or colours available on request.

Article-No. Type. All dimensions in mm. Subject to technical changes. Other dimensions, reel lengths or colours available on request. 4.4 Installation Devices HelaTape HellermannTyton offers a wide range of PVC and rubber tapes for sealing, insulation and bundling of cable and conduits. PVC based tapes are designed for low voltage applications

More information

Utilities Industry. General Information. Products and Services APPLICATIONS

Utilities Industry. General Information. Products and Services APPLICATIONS Utilities Industry General Information HellermannTyton is a global company offering many solutions for cable and pipe fastening, Identification. Another facet of the range of products is tamper evident

More information

THE POWER OF T&B ENGINEERED PRODUCTS AND SERVICES

THE POWER OF T&B ENGINEERED PRODUCTS AND SERVICES Thomas & BettsMORE POWER TO YOU For over 70 years, Canadian electrical contractors, plant engineers and engineering consultants have placed their trust in Thomas & Betts electrical components. Today, Thomas

More information

RPPM SCOPE. Quality Assurance Technical Product Management. Tyco Electronics UK: Iain Brown Colin Diss Nick Crofts

RPPM SCOPE. Quality Assurance Technical Product Management. Tyco Electronics UK: Iain Brown Colin Diss Nick Crofts RK 6214 Revision 3 Page 1 of 6 Date Printed 30-Apr-10 R RK 6214 Revision 3 RPPM SCOPE This Quality Assurance Specification establishes the quality standard for a dual wall sleeving which shall consist

More information

SPECIFICATION RW-2514 Document Number NBC MARKER SYSTEM (Ladder Form) NBC-SCE

SPECIFICATION RW-2514 Document Number NBC MARKER SYSTEM (Ladder Form) NBC-SCE SPECIFICATION: RW 2514 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2514 Document Number 108-121017 NBC MARKER SYSTEM (Ladder Form) NBC-SCE 1. SCOPE NBC-SCE Markers are designed for use where

More information

Molded Parts. Table of Contents

Molded Parts. Table of Contents Molded Parts Table of Contents Overview 4-2 General Information 4-3, 4-4 Selection Tables 4-5, 4-6 Part Numbering System 4-7 Visual Selection Guide 4-8 to 4-20 Boot Adapter Selection Tables 4-21 to 4-23

More information

OLFLEX TUBING & SLEEVING

OLFLEX TUBING & SLEEVING OLFLEX TUBING & SLEEVING Lada sin costo 0 800-024-5277 ventas@lappmexico.com www.lappmexico.com Table of Contents GENERAL PURPOSE HEAT SHRINKABLE TUBING OLFLEX TWPVC 4 High Strength, Extra Durable, Irradiated

More information

RBK-ILS-125 SCOPE. This Quality Assurance Specification establishes the quality standard for RBK-ILS-125.

RBK-ILS-125 SCOPE. This Quality Assurance Specification establishes the quality standard for RBK-ILS-125. RK 6638 Revision 9 Page 1 of 22 Date Printed 30-Apr-10 RK 6638 Revision 9 RBK-ILS-125 SCOPE This Quality Assurance Specification establishes the quality standard for RBK-ILS-125. The objective of this

More information

SWFR. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION KEY FEATURES

SWFR. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION KEY FEATURES SWFR Place hero product image here shorter square image space available. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION SWFR tubing from TE Connectivity

More information

SWFR. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION KEY FEATURES

SWFR. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION KEY FEATURES SWFR Place hero product image here shorter square image space available. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION SWFR tubing from TE Connectivity

More information

Specification This Issue: Date: Replaces: RT-780_Type-I Issue 5 November 10, 2009 Issue 4. Raychem

Specification This Issue: Date: Replaces: RT-780_Type-I Issue 5 November 10, 2009 Issue 4. Raychem Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Specification This Issue: Date: Replaces: RT-780_Type-I Issue 5 November 10, 2009 Issue 4 Raychem RT-780 Type I Tubing

More information

Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing

Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing Features 1/4 to in. and 6 to 12 tubing sizes available in 316/316L stainless steel and copper Seamless and welded tubing

More information

Mecoline IS RDX 5241 F

Mecoline IS RDX 5241 F Radiation cross-linkable PVDF flame retardant compound Compound class Compound category Flame retardant Insulation / sheathing Standards Halogenated NEMA WC 27500 SAE AS 81044/9 SAE AS 81044/12 SAE AS

More information

3M Vinyl Electrical Tapes Tapes to help power through your toughest jobs.

3M Vinyl Electrical Tapes Tapes to help power through your toughest jobs. 3M Vinyl Electrical Tapes Tapes to help power through your toughest jobs. 3M Electrical Solutions Longstanding professional grade. From connectors to terminals to protective coatings, we have the right

More information

Single core conductor BETAtherm 145

Single core conductor BETAtherm 145 Internet: www.synflex.de Single core conductor BETAtherm 145 Description BETAtherm 145 is a flexible low-voltage cable with UL recognition consisting of a tinned copper stranded wire and insulated with

More information

Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers

Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids

More information

TRSA Sleeving SCOPE. This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, flexible polyolefin sleeving.

TRSA Sleeving SCOPE. This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, flexible polyolefin sleeving. RK 6743 Revision 4 Page 1 of 7 Date Printed 31-Mar-14 RK 6743 Revision 4 TRSA Sleeving SCOPE This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, flexible polyolefin

More information

3M Heavy Wall Heat Shrink Tubing ITCSN

3M Heavy Wall Heat Shrink Tubing ITCSN 3M Heavy Wall Heat Shrink Tubing ITCSN Data Sheet September 2013 Description 3M Heavy Wall Heat Shrink Tubing ITCSN is designed to provide reliable performance for electrical splices, connections, and

More information

SPEIFICATION RW-2530 Document No TMS 90 SCE Marker

SPEIFICATION RW-2530 Document No TMS 90 SCE Marker SPECIFICATION: RW 2530 THIS ISSUE: ISSUE 2 DATE: February 2014 SPEIFICATION RW-2530 Document No. 108-121029 TMS 90 SCE Marker TMS 90 SCE Markers are for use in permanent marking applications up to 135

More information

Raychem brand Moulded Components Flame Retarded, Semi-Rigid, Heat Shrinkable, Elastomer (-25)

Raychem brand Moulded Components Flame Retarded, Semi-Rigid, Heat Shrinkable, Elastomer (-25) RW-2070 Revision 2 Page 1 of 8 Date Printed 18-Jul-12 RW-2070 Revision 2 Raychem brand Moulded Components Flame Retarded, Semi-Rigid, Heat Shrinkable, Elastomer (-25) SCOPE This Quality Assurance Specification

More information

ADHESIVE TAPES, HEAT SHRINK TUBES, COUPLING SLEEVE TECHNOLOGY, GROMMETS

ADHESIVE TAPES, HEAT SHRINK TUBES, COUPLING SLEEVE TECHNOLOGY, GROMMETS ADHESIVE TAPES, HEAT SHRINK TUBES, COUPLING SLEEVE TECHNOLOGY, GROMMETS The coupling sleeve sliders allow the coupling sleeve to be easily and reliably poured, even in a sloping position. The easy solution

More information

Tyco Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable

Tyco Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable RT-1146 Page 1 of 7 Rev 7 RT-1146 Tyco Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable SCOPE: This specification covers the requirements for one type of highly flexible, electrical-insulating

More information

Shrink-Kon. Shrink-Kon. In This Section.

Shrink-Kon. Shrink-Kon. In This Section. In This Section Shrink-Kon Overview...F2 F3 Heavy-Wall Heat-Shrinkable Tubing...F4 F7 Heat-Shrinkable End Caps...F8 Heat-Shrinkable Breakout Boots...F9 Medium-Wall Heat-Shrinkable Tubing...F10 Thin-Wall

More information

VERSAFIT V2 AND V4 TUBING Polyolefin, Flexible, Heat-Shrinkable, Flame-Retardant

VERSAFIT V2 AND V4 TUBING Polyolefin, Flexible, Heat-Shrinkable, Flame-Retardant TE Connectivity 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing Specification This Issue: Date: Replaces: RW-3023 Issue 9 Nov 21, 2016 Issue 8 VERSAFIT V2 AND V4 TUBING Polyolefin, Flexible,

More information

Heat Shrink Product Catalogue. Jointmask

Heat Shrink Product Catalogue. Jointmask Heat Shrink Product Catalogue HEAT SHRINK INDOOR/OUTDOOR 3 CORE TERMINATIONS, HMO/I-1133 SERIES KIT COMPONENTS 1. Red Mastic 9. Ground Copper Braid 2. Lugs 10. Heat Shrink Umbrella 3. Conductor 11. Heat

More information

THERMOFIT RNF-100 TUBING Polyolefin, Flexible, Heat-Shrinkable

THERMOFIT RNF-100 TUBING Polyolefin, Flexible, Heat-Shrinkable Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-350 Issue 17 April 9, 2004 Issue 16 THERMOFIT RNF-100 TUBING Polyolefin, Flexible,

More information

PRODUCT CATALOGUE

PRODUCT CATALOGUE PRODUCT CATALOGUE 2016-2017 SHRINKTECH was established in 2008 in Slovakia and today is represented with more branch offices trough out all Europe. Our professionals employees and partners are working

More information

DCPT SLEEVING SCOPE. This document is electronically reviewed and approved and so no signatures will appear.

DCPT SLEEVING SCOPE. This document is electronically reviewed and approved and so no signatures will appear. RW 2056 Revision 4 Page 1 of 10 Date Printed 3/3/2014 RW 2056 Revision 4 DCPT SLEEVING SCOPE This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, electrically-insulating,

More information

Bundling, Insulating and Sealing Products

Bundling, Insulating and Sealing Products Product Facts Plastic cable wrap provides an easy way to bundle cable, wire, tubing or hoses Helps protect bundles against abrasion caused by vibration Coiled wrap allows wiring harness breakouts Nylon

More information

SPECIFICATION CONTROL DRAWING

SPECIFICATION CONTROL DRAWING SPECIFICTION CONTROL DRWING Product Dimensions Product Rev s Received fter Free Recovery Maximum Weight Product ±2.54 øb W øb W Pounds/mpc Name (±0.00) min min max min D-300-0 E 25.40 4.45 0.25 2.03 0.76.5

More information

THERMOFIT SCL TUBING Polyolefin, Selectively Crosslinked, Semirigid, Heat Shrinkable

THERMOFIT SCL TUBING Polyolefin, Selectively Crosslinked, Semirigid, Heat Shrinkable Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1301 Issue 7 October 3, 2003 Issue 6 THERMOFIT SCL TUBING Polyolefin, Selectively

More information

Parflex/Atlantic. Fluoropolymer Tubing Products. Catalog 4150/USA March 2003 revised Sept. 2003

Parflex/Atlantic. Fluoropolymer Tubing Products. Catalog 4150/USA March 2003 revised Sept. 2003 Fluoropolymer Tubing Products Catalog 4150/USA March 2003 revised Sept. 2003 Table of Contents Fluoropolymer Tubing Products Introduction... 3 Matrix... 3 Summary of Properties... 4 Fluid Handling Tubing

More information

SLEEVINGS AND CABLE PRODUCTS

SLEEVINGS AND CABLE PRODUCTS Manufacturers & Suppliers of: SLEEVING General Purpose PVC High Temperature Fibreglass Sleeves Fire Sleeves Electric Insulation Sleeving Heat Shrink Mechanical & Abrasion Protection Sleeves SILICONE Profiles

More information

APPLIANCES /// RAYCHEM TUBING PRODUCTS RAYCHEM TUBING PRODUCTS SINGLE WALL, DUAL WALL, HEAVY DUTY, SPECIAL PURPOSE AND MEDICAL-GRADE

APPLIANCES /// RAYCHEM TUBING PRODUCTS RAYCHEM TUBING PRODUCTS SINGLE WALL, DUAL WALL, HEAVY DUTY, SPECIAL PURPOSE AND MEDICAL-GRADE APPLIANCES /// RAYCHEM TUBING PRODUCTS RAYCHEM TUBING PRODUCTS SINGLE WALL, DUAL WALL, HEAVY DUTY, SPECIAL PURPOSE AND MEDICAL-GRADE Restriction on the use of Hazardous Substances (RoHS) At TE Connectivity

More information

Dual Wall Heat-Shrinkable Tubing with Hot-Melt Inner Layer

Dual Wall Heat-Shrinkable Tubing with Hot-Melt Inner Layer AUTOMOTIVE Dual Wall Heat-Shrinkable Tubing with Hot-Melt Inner Layer Satoshi YAMASAKI*, Taro FUJITA, Shinya NISHIKAWA, Yasutaka EMOTO, Ryouhei FUJITA, and Shuji AZUMA ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

More information

Hose protection. Hose protection. Edition: 02/2008 Catalogue 1

Hose protection. Hose protection. Edition: 02/2008 Catalogue 1 Hose protection Edition: 02/2008 Catalogue 1 12 Note All the information in this catalogue is based on the standards applicable at the time of publication and the regulations of the employers liability

More information

PVC Insulating Tape. Electrical Tapes

PVC Insulating Tape. Electrical Tapes Electrical Tapes 7 Electrical Tapes Electrical Tapes 3M offer a range of over 30 electrical tapes and mastics for insulation, jointing, corrosion protection, all weather protection and environmental sealing.

More information

General Information CROSS REFERENCE GUIDE 1 SELECTION GUIDE 2-3 PART NUMBER GUIDE 4. Product Type Heat Shrink Thin Wall Tubing

General Information CROSS REFERENCE GUIDE 1 SELECTION GUIDE 2-3 PART NUMBER GUIDE 4. Product Type Heat Shrink Thin Wall Tubing INDEX General Information Page CROSS REFERENCE GUIDE 1 SELECTION GUIDE 2-3 PART NUMBER GUIDE 4 Product Type Heat Shrink Thin Wall Tubing Page Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY, FLAME

More information

Electrical Insulating Tapes

Electrical Insulating Tapes Electrical Insulating Tapes Energy, Mining, Industrial and Contractors applications LV and MV electrical jointing and termination applications Adhesive or Self-amalgamating UV resistant Cold and weather

More information

SPECIFICATION RW-2525 Document Number TMS - CCUV SLEEVING

SPECIFICATION RW-2525 Document Number TMS - CCUV SLEEVING SPECIFICATION: RW 2525 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2525 Document Number 108-121025 TMS - CCUV SLEEVING 1. SCOPE This Quality Assurance Specification establishes the quality

More information

MaxCell Technical Manual. Design Parameters 4G Product Line

MaxCell Technical Manual. Design Parameters 4G Product Line MaxCell Technical Manual Design Parameters 4G Product Line 4G Materials of Construction 4G Fabric Warp - Polyester Monofilament Diameter = 0.23 +/- 0.02 mm Denier = 520 +/- 25 Filling - Nylon 6 Monofilament

More information

THERMOFIT SFR TUBING Modified Silicone Elastomer, Flame-Retarded, Heat-Shrinkable

THERMOFIT SFR TUBING Modified Silicone Elastomer, Flame-Retarded, Heat-Shrinkable Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1140 Issue 6 August 20, 2014 Issue 5 THERMOFIT SFR TUBING Modified Silicone Elastomer,

More information

overhead and underground power equipment ISSUE 28 AUGUST / SEPTEMBER 2013 / OHUG.COM OHUG WINS BEST TRADE STAND AT EEA FOR THE SECOND YEAR IN A ROW!

overhead and underground power equipment ISSUE 28 AUGUST / SEPTEMBER 2013 / OHUG.COM OHUG WINS BEST TRADE STAND AT EEA FOR THE SECOND YEAR IN A ROW! ISSUE 28 overhead and underground power equipment AUGUST / SEPTEMBER 2013 / OHUG.COM OHUG WINS BEST TRADE STAND AT EEA FOR THE SECOND YEAR IN A ROW! SCOTCH SUPER 33+ PREMIUM TAPE HEAT SHRINK PRODUCTS THAT

More information

Custom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.

Custom-Designed Clamps. Machined Versions.  Online Configurator for Custom-Designed Clamps A56. Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,

More information

3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series

3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series 3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.

More information

The UK s Leading Supplier LUMINUS

The UK s Leading Supplier LUMINUS The UK s Leading Supplier LUMINUS GUIDE 2018 Description: Amphenol LTD is excited to become the UK s leading supplier of the Luminus series. The product was originally designed by our sister division Amphenol

More information

Heat Shrink Technology

Heat Shrink Technology Heat Shrink Technology Welcome to SG-Canusa Leading in Heat Shrink Technology You will find inside a full package of SG-Canusa product information. There s a Selection Chart for a quick overview of all

More information

THERMOFIT RT-218 TUBING Modified Polyvinylidene Fluoride, Low Outgassing, Heat-Shrinkable

THERMOFIT RT-218 TUBING Modified Polyvinylidene Fluoride, Low Outgassing, Heat-Shrinkable Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-218 Issue 4 July 3, 1997 Issue 3 THERMOFIT RT-218 TUBING Modified Polyvinylidene

More information

3M Medium-Wall Heat Shrink Tubing IMCSN

3M Medium-Wall Heat Shrink Tubing IMCSN 3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet April 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,

More information

THERMOFIT CRN TUBING Polyolefin, Semirigid, Heat-Shrinkable

THERMOFIT CRN TUBING Polyolefin, Semirigid, Heat-Shrinkable TE Connectivity 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing Specification This Issue: Date: Replaces: RT-360 Issue 10 30-Jan-15 Issue 9 THERMOFIT CRN TUBING Polyolefin, Semirigid, Heat-Shrinkable

More information

Table of Contents. Applications...3. Extruded Sizes...7. Value Added Services Heat Shrinkable Extrusions Technical Information...

Table of Contents. Applications...3. Extruded Sizes...7. Value Added Services Heat Shrinkable Extrusions Technical Information... Table of Contents Applications...3 Medical...4 Industrial...5 Extruded Sizes...7 PTFE Sub-Lite-Wall Extruded&HeatShrinkableTubing...8 ExtrudedTubing(AWG)...10 HeavyConstructionTubing...14 HeavyWallTubing...15

More information

3M Medium-Wall Heat Shrink Tubing IMCSN

3M Medium-Wall Heat Shrink Tubing IMCSN 3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet November 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,

More information

IEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor

IEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor TABLE OF CONTENTS SECTION SUBJECT PAGE I. SCOPE...1 II. APPLICABLE DOCUMENTS...1 III. CONDUCTOR...2 IV. SEPARATOR...2 V. INSULATION...2 A. Physical Properties...2 B. Electrical Properties...3 C. Qualification

More information

Potting & Encapsulating

Potting & Encapsulating Potting & Encapsulating Potting and encapsulating compounds are used to provide mechanical reinforcement to housed assemblies, to fill large voids, and to protect components from the effects of exposure

More information

BURNDY Products. Accessories TABLE OF CONTENTS. Heavy Wall Heat Shrinkable End Cap...M-9. Introduction...M-2. Clear Heat Shrink Tubing...

BURNDY Products. Accessories TABLE OF CONTENTS. Heavy Wall Heat Shrinkable End Cap...M-9. Introduction...M-2. Clear Heat Shrink Tubing... TABLE OF CONTENTS Introduction...M-2 PENETROX (Install Connections)...M-2 PENETROX A, PENA-1 LB, PENETROX A-13, PENETROX E...M-3 PENETROX Technical & Ordering Information...M-4 Thin Wall Heat Shrink Tubing

More information

Your Pick... One Solution

Your Pick... One Solution Abrasion Resistance NBCCS EMC Safety High Speed Complete Harnessing Solutions Repairability Reliability Extreme Temperatures Flexibility Your Pick... One Solution Low Outgassing Flame Retardant Fuel and

More information

Low Pressure Molding Overview. Henkel Electronics

Low Pressure Molding Overview. Henkel Electronics Low Pressure Molding Overview Henkel Electronics Agenda 1 Technology 2 Process 3 Solutions 2 Agenda Low Pressure Molding Overview of Technology Definition Value Proposition Applications Processing Equipment

More information

Caledonian Cables Ltd

Caledonian Cables Ltd Caledonian Motor Connection Cable Caledonian Cables Ltd s 1 Addison Addison Motor Connection Cable Company Profile Caledonian. established in 1978.offers one of the most complete lines of fiber and copper

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),

More information

Heat-Shrinkable Tubing

Heat-Shrinkable Tubing Table of Contents Overview... C2C3 Heavy-Wall... C4C9 Medium-Wall... C10 Thin-Wall...C11C16 Splice Insulators and Insulating Covers...C17C22 Installation Tools...C23 Installation Guidelines and Cross Reference...C24

More information