APPLICATIONS. This circulator is suitable for drinking water only. Hot water accelerated circulation in distribution loops.

Transcription

1 OPERATING LIMITS Flow rates up to : m /h Heads up to :, m Max. operating pressure : bar Max. loop temperature : +8 C Max. circulator temperature: C Max. ambient temperature : + C Water hardness (TH) : F ND ports : S - DSB SINGLE AND TWIN-HEADS CIRCULATORS Bronze and stainless steell casings Domestic secondary hot water range - Hz,. H m /-S/DSB NEC APPLICATIONS This circulator is suitable for drinking water only. Hot water accelerated circulation in distribution loops. Domestic installations and small commercial installations. Hot water on opening tap. Qm/h ADVANTAGES Water quality preserved: - constant water renewal in rotor chamber ; - choice of materials compatible with network ; - DSB Anti legionella Infection System. Anti-blocking system guaranteeing exceptional resistance to hard water, up to F. Easier choice : - speed, - adaptation accessories enabling replacement without altering the piping. DSB : continued availability of an emergency circulator with perfect irrigation of the domestic hot water loop due to the ALS system. - Simultaneous operation possible in the case of increase in flow rate. Automatic permutation possible through the Pump Management Unit (see specific instructions: MGP N -88). For -S: integrated and automatic motot overload protection. -B with ) & without counter flanges ) ) assembled with CBOV, perfectly interchangeable with the old references SA (distance between ports = 8 mm) -B with ) and without adapters ) : Dual assembly possible ) -B with kit = distance between ports mm ØG / ) -B = distance between ports mm ØG DSB-B Anti legionella Infection System (ALS) DSB-B: distance between ports = 8 mm ØG /. DSB-B with BAG-ADAPT distance between ports = 8 mm ØG -S: stainless steel ou B: bronze casing DSB: bronze casing : a choice of material compatible with network N.T. N -/ENG. - Éd./- 9

2 - -S - DSB DESIGN PRESELECTION CURVES AT MAXIMUM SPEED Hydraulic part Casing with threaded ports for direct assembly on piping : - in bronze for assembly on copper piping ( and DSB) ; - in stainless steel for assembly on g alvanized piping (-S). Rotating parts in contact with water in anti-corrosive material. Stainless steel ring at impeller seal. DSB : single bronze casing with suction and discharge ports on the same axis. DSB : check valve integrated with the Anti legionella Infection System. Motor speed ( -B single speed). Manual speed change. Wet rotor and self-lubricating bearing bushings. Capacitor incorporated in the terminal. Speed : see table Winding -phase : V Frequency : Hz (option Hz) Insulating category : F ( C) Conformity : CE -S Specific : IP Immunity : EN -- Emission : EN -- STANDARD CONSTRUCTION Main parts Material B Pump casing -S DSB Bronze Stainless steel Bronze Impeller Composite material Impeller shaft Ceramic Bushings Graphite Can Stainless steel Leaktight seals EPDM IDENTIFICATION - B domestic range - S D : t win casing N : single casing Q nominal Ø suction and discharge ports Type of casing : B = bronze S = Stainless steel DSB Hz NS DSB - B -B - - S B B Qm/ h Ql / min Ql /s.. FITTING POSITIONS

3 - -S - DSB SECTIONAL DRAWINGS -S Interior of the single circulator - Stainless steel casing proposed on wide diameter apparatus - compatibility with galvanized steel piping. - Ceramic shaft : - constant renewal of water, temperature maintained above the thereshold of lime precipitation. - Stainless steel cartridge and rotor with a stainless steel sleeve. - Integrated and automatic motor overload protection for running security. Twin circulator: principle of the anti-legionella infection system (ALS) (Patent pending). Interior of the single circulator The ALS gives constant circulation and renewal of water in the hydraulic casing of the emergency circulator when its motor is shut down : - no stagnant water (no ox-bow phenomenon); - maintaining a steady temperature between the two circulator units which avoids formation of legionella infection in hot water installations adjusted to a normal operating temperature. - Casing with motor in operation. - Casing with motor shut down - Water circulation in the domestic hot water loop. - ALS water circulation. 9

4 - -S - DSB HYDRAULIC PERFORMANCES.8... Qm /h Ql/ min Ql/s -B,,,8,,, Qm /h Ql/ min Ql/s 8 8 -B -S - I III II B Qm /h... Ql/ min... Ql/s I II 8 -B -S - III Qm /h Ql/ min 8 9 Ql/s B 8 -S -.. Qm /h Ql/ min Ql/s III II I Qm /h Ql/ min 8 9 Ql/s DSB -B Qm /h Ql/ min 8 9 Ql/s

5 - -S - DSB INSTALLATION DIAGRAM Domestic Ballon hot water de stockage storage E.C.S. Town Water Eau de ville Domestic hot water distribution loop : Loop maximum temperature C (according to Standard Local Rule). Recommended flow speed between. and m/s maximum. Circulator assembled on the backflow of the loop, after the drawing points. 99

6 H - -S - DSB ELECTRICAL DATA AND DIMENSIONS FEATURES -B bronze casing ØG -S stainless casing L øg Pg. a) Electrical - Single-phase V, Hz with capacitor integrated in the terminal box. H H H L L DSB bronze casing P P H H P P b) Installation - Motor shaft always horizontal. Connection with the network : Depending on the model : - Copper unions (R) to be welded, or brass unions to be screwed (RU brass) on copper piping, - Steel unions to be screwed (RU) on galvanized steel piping. c) Conditionnement - With gaskets, without union. d) Maintenance - Standard exchange of the assembly. OPTIONS & ACCESSORIES Unions. NP oval screw-on counter flanges to be screwed. Check valve. Isolating valves. Moteur Pompe ORDER speed nominal capacitor standard Speed P H P L B.A.B. L P H H mass Ø G connection by REFERENCE selector amperage capacity assembly position rpm W A µf mm mm mm mm mm mm mm kg mm -B 8,, x V G R or RU brass 9h, -B,, x V 9 9 G R or RU brass 9h 8,, -B 9,8 x V 9 9 G R or RU brass 9h,, R/8 -B,9, x V 8 9 9, G / or RU brass 9h 9 89,9 * or CBOV, -B,, x V ,8 G / RED brass or RU brass h,, -S -,, x V G / RU h 9,, -S -,, x V G / RU h,8, -S - 8,9, x V , G / RED or RU h 9,, DSB-B,, x V (See drawing) G / RED or RU brass h 8, * also available in H = mm ØG /