FORGING FACILITY AND PROCESS ApPROVAL
|
|
- Leo McLaughlin
- 6 years ago
- Views:
Transcription
1 CERTIFICATE NUMBER 14-MMPS-FF&PAC-S40 FOUNDED 1862 PORT OFFICE ABS MATERIALS HOUSTON CERTIFICATE OF FORGING FACILITY AND PROCESS ApPROVAL This is to certify that a representative of ABS did, at the request of Scot Forge - Spring Grove, Illinois attended its facilities as indicated in the ABS Milwaukee port office survey report number MW dated 20 December 2012, in order to carry out a survey of the facilities and associated quality procedures. The facility is considered capable of manufacturing Ferrous & Non-Ferrous Forgings for Marine Applications in accordance with the ABS Approval letter, ABS Rules, designated standards and ABS approved drawings. The approval is valid subject to adherence to relevant ABS Rules and survey requirements and annual facility endorsement by an ABS representative. ISSUE DATE 20 Dec 12 EXPIRATION DATE 19 Dec 17 SIGNATURE V BALASUBRAMANIAM PRINCIPAL ENGINEER ABS MATERIALS, HOUSTON FIRST ANNUAL SECOND ANNUAL THIRD ANNUAL FOURTH ANNU AL Project #: ; Task #: T ; Office Rer#: NOTE. This ccnificale evidences compliance with one or more of the Rul es. Guides, slandlll'ds or other criteria of ABS or a statutory. industriel or manufacturer's standards It is issu ed solely for the use of ASS, its committees, its clients or other authorized entities. This CenificalC is I rep resentation only that lhe structure, item of material, eq uipment, machi nery or any other hem covered by this Certificate has met one or more of tile Rules, Guid es, stalldards or ot her ~ri t ~ ria of ASS as of the date of issue_ Parties are advised to review the Rul es for the scope and conditions of classification and to review the survey records for a full descri ption of any restrictions or limitu ion on the vessel's service or surveys The validity, applicability and interpretation of this Certificate is governed by the Rules and standards of ASS who shall remain the sole judge thereof Nothing contained in this Certificate or in any notation made in contemplation of this Cert ificate shall be deemed to relieve any designer, builder, owner, manucacturer, seller, supplier, repairer, operator or other entity of any warranty express or implied FOR CERT Rev I Page I of I
2 FROM: Materials Department TO: Scot Forge - Spring Grove ATTN: Aimee McGillivray ENGINEER: Jim Oehrle 02E TASK No: T SUBJECT: DATE: 10 March 2014 PAGE: 1 of 1 amcgiliivray@scotforge.com CC: Paul Beattie (ABS Milwaukee) MMPS: : Scot Forge (Spring Grove, IL, Clinton WI & Franklin Park, ILl Renewal of Forge Facility and Process Approval to Produce Ferrous & Non Ferrous Forged Products for Marine Applications. We have received the ABS Milwaukee survey reports MW , MW & MW on the subject, together with enclosures, relative to the subject, and with regard thereto, we advise that Scot Forge (Spring Grove, IL, Clinton WI & Franklin Park, IL) is considered facility and process approved to produce ferrous & non-ferrous forged products as outlined below. The relevant ABS Rules (Part 2: Materials & Welding & (2014» are to be adhered to in ali respects, and production, inspection, and testing of forgings are to be to the satisfaction of the attending ABS Surveyor. Product Ferrous & Non-Ferrous Forgings(1)!2) (Round Blank, Ring, Hub, Bar, Flat, Round Bar, Hollows, SplndleS)(3)(4) ASS & Non ASS Grades Carbon Steels, Alloy Steels, Stainless Steels, Copper Based Alloys, Nickel Based Alloy Type : Alloys, Aluminum Alloys, Titanium Alloys In accordance with the following National & International standards: ASTM, ASME. AMS, API, EN, DIN, DNV, L10yds Register Manufacturing Process Open Die Forging, Ring Rolling Location Spring Grove, II 1 Clinton, WI 1 Franklin Park, II Maximum Weight 36,300 kg (80,000 Ib) I 22,700 kg, (50,000 Ib) 11,360 kg (3,000 Ib) Notes: Very truly yours, 1. Forgings are to be design approved when used on ASS classed vessels I offshore Installations. 2. It is the responsibility of the facility to Inform and obtain ASS approval, if any changes are made in the manufacturing procedure specification(s), and/or, to the processing parameters as compared to initially approved technical document(s). 3. Weld repairs of listed and approved forged products are not permitted as indicated in the reviewed documents. 4. Forgings produced for ASS Classed applications are to have an ASS Surveyor in attendance at the facility for unit certification. Matthew D, Tremblay Vice President of Engineering ABS Americas By: ~. ~=_-_ V. Balasubramaniam Principal Engineer ABS Materials, Houston AMERICAS DIVISION ABS PlAZA, NORTHCHASE DRIVE, HOUSTON, TX USA TEL: FAX: joehrle@eagle.orgwebsite: WNW.eagle.org
3 CERTIFICATE NUMBER 14-MMPS-FF&PAC-539 FOUNDED 1862 PORT OFFICE ABS MATERIALS HOUSTON CERTIFICATE OF FORGING FACILITY AND PROCESS ApPROVAL This is to certify that a representative of ABS did, at the request of Scot Forge - Clinton, Wisconsin attended its facilities as indicated in the ABS Milwaukee port office survey report number MW dated 19 December 2012, in order to carry out a survey of the facilities and associated quality procedures. The facility is considered capable of manufacturing Ferrous & Non-Ferrous Forgings for Marine Applications in accordance with the ABS Approval letter, ABS Rules, designated standards and ABS approved drawings. The approval is valid subject to adherence to relevant ABS Rules and survey requirements and annual facility endorsement by an ABS representative. ISSUE DATE 19 Dec 12 EXPIRATION DATE 18 Dec 17 SIGNATURE V BALASUBRAMANIAM PRINCIPAL ENGINEER ABS MATERIALS, HOUSTON FIRST ANNUAL SECOND ANNUAL,. - THIRD ANNUAL FOURTH ANNUAL Project #: ; Task #: Tl ; Office Ref#: 6134 NOTE This certificate evidences compliance with one or more ortbe Rules, Guides, standards or other criteria of ABS or a statutory, industrial or manufacturer's standards It is issued solely for (he use of ASS, its committees, its clients or other aulhoriuld entities. This Certificate is a representation only that the structure, item of material, equipment, machinery or any other item covered by this Certificate has met one or more of tile Rules. Guides, standards or otller criteria of ASS as of tile date of issue. Parties are advised 10 review the Rules for tile scope and conditions of classification and to review the survey records for a fu ll description of any restrictions or limitation on the vessel's service or surveys. The validity, applicability and interpretation ofthis Certificate is governed by the Rules and standards of ASS who shall remain the sole judge thereof Nothing eorrtained in this Certificate or in any notation made in contemplation of this Certificate shall be deemed to relieve any designer, builder, owner, manufacturer, seher, supplier, repairer, operator or other entity of any warranty express or implied FOR CER T Rev 1 Page 1 of 1
4 FROM: Materials Department TO: Scot Forge - Spring Grove AnN: Aimee McGillivray ENGINEER: Jim Oehrle 02E TASK No: T SUBJECT: DATE: 10 March 2014 PAGE: 1 of 1 amcgillivray@scotforge.com CC: Paul Beattie (ABS Milwaukee) MMPS: : Scot Forge (Spring Grove, IL, Clinton WI & Franklin Park, IL) Renewal of Forge Facility and Process Approval to Produce Ferrous & Non Ferrous Forged Products for Marine Applications. We have received the ABS Milwaukee survey reports MW , MW & MW on the subject, together with enclosures, relative to the subject, and with regard thereto, we advise that Scot Forge (Spring Grove, IL, Clinton WI & Franklin Park, IL) is considered facility and process approved to produce ferrous & non-ferrous forged products as outlined below. The relevant ABS Rules (Part 2: Materials & Welding & (2014)) are to be adhered to in all respects, and production, inspection, and testing of forgings are to be to the satisfaction of the attending ABS Surveyor. Product : Alloy Type Manufacturing Process Notes: Ferrous & Non-Ferrous Forgings (1 )(2) (Round Blank, Ring, Hub, Bar, Flat. Round Bar, Hollows, Spindles)(3)(4) ASS & Non ASS Grades Carbon Steels, Alloy Steels, Stainless Steels, Copper Based Alloys, Nickel Based : Alloys, Aluminum Alloys, Titanium Alloys In accordance with the following National & International standards: ASTM, ASME. AMS, API, EN, OIN, DNV, L10yds Register Open Die Forging, Ring Rolling Location : Spring Grove, II I Clinton, WI I Franklin Park, II Maximum Weight : 36,300 kg (80,000 Ib) I 22,700 kg, (50,000 Ib) I 1,360 kg (3,000 Ib) Very truly yours, 1. Forgings are to be design approved when used on ASS classed vessels I offshore installations. 2. It is the responsibility of the facility to inform and obtain ASS approval, if any changes are made in the manufacturing procedure speciflcation(s), and/or, to the processing parameters as compared to initially approved technical document(s). 3. Weld repairs of listed and approved forged products are not permitted as Indicated in the reviewed documents. 4. Forgings produced for ABS Classed applications are to have an ASS Surveyor in attendance at the facility for unit certification. Matthew D, Tremblay Vice President of Engineering ABS Americas By: ~>w ' ~=-_-_ V. Balasubramaniam Principal Engineer ABS Materials, Houston AMERICAS DIVISION ABS PLAZA NORTHCHASE DRIVE. HOUSTON. TX USA TEL: FAX: joehrle@eagle.org WEBSITE:
5 CERTIFICATE NUMBER 14-MMPS-FF&PAC-S41 FOUNDED 1862 PORT OFFICE ABS MATERIALS HOUSTON CERTIFICATE OF FORGING FACILITY AND PROCESS ApPROVAL This is to certify that a representative of ABS did, at the request of Scot Forge - Franklin Park, Illinois attended its facilities as indicated in the ABS Milwaukee port office survey report number MW I dated 20 December 2012, in order to carry out a survey of the facilities and associated quality procedures. The facility is considered capable of manufacturing Ferrous & Non-Ferrous Forgings for Marine Applications in accordance with the ABS Approval letter, ABS Rules, designated standards and ABS approved drawings. The approval is valid subject to adherence to relevant ABS Rules and survey requirements and annual facility endorsement by an ABS representative. ISSUE DATE 20 Dec 12 EXPIRATION DATE 19 Dec 17 SIGNATURE V BALASUBRAMANIAM PRINCIPAL ENGINEER ABS MATERIALS, HOUSTON FIRST ANNUAL SECOND ANNUAL THIRD ANNUAL FOURTH ANNUAL Project #: 3 I 99920; Task #: TII49095; Office Ref#: 6134 NOTE: This certificate evidences compliance with one or more of the Rules, Guides, staooards or other criteria of ASS or a statutory, industrial or manufacturcf's standards It is issued solely for the use of ADS, its commillees, ils clients or olher authorized entities. This Certificate is a representation only that the structure, item of material, equipment, machinery or any ollter item covered by Ihis Certificate has met one or more oftlte Rules, Guides, standards or other criteria of ADS as oflhe date of issue. Parties are advised to review the Rules for the scope and conditions of classification and to review the survey records for a full description of any restrictions or limitation on tbe vessel>s service or surveys. The validity, applicability and intcl}lretation of this Certificate is governed by the Rules and standards of ABS who shall remain the sole judge thereof Nothing contained in this Certificate or in any notation made in contemplation of this Certificate sha ll be deemed to relieve any designer, builder, owner, manufacturer, seller, supplier, repairer, operator or other entity of any warranty express or implied FOR CERT Rev I Page I of 1
6 FROM: Materials Department TO: Scot Forge - Spring Grove AnN: Aimee McGillivray ENGINEER: Jim Oehrle 02E TASK No: T SUBJECT: DATE: 10 March 2014 PAGE: 1 of 1 amcgillivray@scotforge.com CC: Paul Beattie (ABS Milwaukee) MMPS: : Scot Forge (Spring Grove, IL, Clinton WI & Franklin Park, ILl Renewal of Forge Facility and Process Approval to Produce Ferrous & Non Ferrous Forged Products for Marine Applications. We have received the ABS Milwaukee survey reports MW , MW & MW on the subject, together with enclosures, relative to the subject, and with regard thereto, we advise that Scot Forge (Spring Grove, IL, Clinton WI & Franklin Park, IL) is considered facility and process approved to produce ferrous & non-ferrous forged products as outlined below. The relevant ABS Rules (Part 2: Materials & Welding & (2014» are to be adhered to in all respects, and production, inspection, and testing of forgings are to be to the satisfaction of the attending ABS Surveyor. Product : Alloy Type : Ferrous & Non-Ferrous Forgings(1)(2) (Round Blank, Ring, Hub, Bar, Flat, Round Bar, Hollows, Spindles)(3)l4) ABS & Non ABS Grades Carbon Steels, Alloy Steels, Stainless Steels, Copper Based Alloys, Nickel Based Alloys, Aluminum Alloys, Titanium Alloys In accordance with the following National & International standards: ASTM, ASME. AMS, API, EN, DIN, DNV, Lloyds Register Manufacturing Process Open Die Forging, Ring Rolling Location : Sprina Grove, II I Clinton, WI I Franklin Park, II Maximum Weight : 36,300 kg (80,000 Ib) I 22,700 kg, (50,000 Ib) I 1,360 kg (3,000 Ib) Notes: 1. Forgings are to be design approved when used on ASS classed vessels I offshore installations. 2. It is the responsibility of the facility to inform and obtain ABS approval, if any changes are made in the manufacturing procedure specification(s}, andlor, to the processing parameters as compared to initially approved technical document(s). 3. Weld repairs of listed and approved forged products are not permitted as indicated in the reviewed documents. 4. Forgings produced for ABS Classed applications are to have an ABS Surveyor in attendance at the facility for unit certification. Very truly yours, Matthew D, Tremblay Vice President of Engineering ABS Americas BY: _~~~== -_ V. Balasubramaniam Principal Engineer ABS Materials, Houston AMERICAS DIVISION ASS PlAZA, NORTHCHASE DRIVE, HOUSTON, TX USA TEL: FAX: joehrle@eagle.orgwebsite:
ALL METALS & FORGE GROUP
ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.
More informationCERTIFICATION OF EXISTING BLOWOUT PREVENTERS AND ASSOCIATED SYSTEMS
Guidance Notes on Certification of Existing Blowout Preventers and Associated Systems GUIDANCE NOTES ON CERTIFICATION OF EXISTING BLOWOUT PREVENTERS AND ASSOCIATED SYSTEMS DECEMBER 2010 (Updated February
More informationthe forging evolution
FORGING TRUE LEADERSHIP WITH GLOBAL REACH HIGH-VALUE FORGING SOLUTIONS Frisa s HIGH-VALUE solutions and services include needs assessment, forging, heat treating, machining and non-destructive testing.
More informationHINDON FORGE PVT. LTD.
www.hindonforge.net Hammering Quality into Forgings An ISO 9001:2000 Certified Co. HINDON FORGE PVT. LTD. Manufacturers of Critical Steel Forgings and Flanges MANUFACTURERS & EXPORTERS OF ALL KINDS OF
More informationTel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates
Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic
More informationABOUT US. Our philosophy is to supply quality products at best possible price in a timely manner for utmost customer satisfaction.
India s Leading Manufacturer & Exporter of, and An ISO 9001 : 2008 Certified Company ABOUT US Ace Alloys LLP is one the most prominent manufacturer, supplier and exporter of,, Alloy Steel, Nickel Alloy,
More informationPRE-LAID POSITION MOORING SYSTEMS AND EQUIPMENT FOR MOBILE OFFSHORE UNITS
Guide for the Classification Symbols Pre-Laid Position Mooring Systems and Equipment for Mobile Offshore Units GUIDE FOR THE CLASSIFICATION SYMBOLS PRE-LAID POSITION MOORING SYSTEMS AND EQUIPMENT FOR MOBILE
More informationStandard Specification for Carbon Steel Forgings for Piping Applications 1
Addr: 29, 227 Changle Rd., Shanghai, 2000. Tel: 86-2-6470807 Designation: A 0/A 0M 0 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard
More informationThinking big. Acting bold.
Thinking big. Acting bold. About us Established in 1990, Sanghvi Forging is among the country s fastest growing forging players. Our products Tool Steel Forged Flanges Heavy Forgings Machined Forgings
More informationStandard Specification for Carbon Steel Forgings for Piping Applications 1
Designation: A0/A0M 4 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard Specification for Carbon Steel Forgings for Piping Applications
More informationCONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products
BURTON DELINGPOLE FLANGES AND FITTINGS CONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products Contoured Bodied Flange Branch Fittings Buttweld Branch
More informationForging Solutions. Open Die and Rolled Ring Forging the Processes, Applications and Benefits
Forging Solutions Open Die and Rolled Ring Forging the Processes, Applications and Benefits The Open Die Forging Process Steps to produce a typical spindle-shaped part: 1. Starting stock cut to size by
More informationAPI-5L Line Pipe. API-5L X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL-1 PSL-2 Line Pipe. API 5L Grade B PSL1 Line Pipes - Available ex-stock
API-5L Line Pipe API-5L X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL-1 PSL-2 Line Pipe API 5L Grade B PSL1 Line Pipes - Available ex-stock API 5L Grade B PSL2 Line Pipes - Available ex-stock API
More informationNextgen Steel & Alloys
+91-8048109680 Nextgen Steel & Alloys https://www.nextgenoverseas.net/ Our organization is engaged in manufacturers, importers and exporters of an extensive collection of high quality Chemicals, Paper
More informationAsset Integrity Management. Technical Solutions for Operational Challenges
Asset Integrity Management Technical Solutions for Operational Challenges Providing Programs to Bolster Assets As pioneering technologies gain a foothold in the offshore and marine industries, ABS will
More informationMATERIAL MANUFACTURE CERTIFICATE
MATERIAL MANUFACTURE CERTIFICATE Certificate No.: 12210-2018-CE-USA-DNV GL Initial date: 15 March, 2009 Validity: 17 April, 2018 16 April, 2021 This certificate consists of 5 pages This is to verify that
More informationMATERIALS AND WELDING 2013
Part 2: Rules for Materials and Welding Aluminum and Fiber Reinforced Plastics (FRP) Chapters 5-6) RULES FOR MATERIALS AND WELDING 2013 PART 2 ALUMINUM and FIBER REINFORCED PLASTICS (FRP) (CHAPTERS 5-6)
More information+91-8071803871 Maharashtra Metal (India) http://www.maharashtrametal.co.in/ Maharashtra Metal (India) is a trusted firm engaged in manufacturing and exporting a commendable range of Ferrous and Non Ferrous
More informationCERTIFICATION OF DRILLING SYSTEMS
GUIDE FOR THE CERTIFICATION OF DRILLING SYSTEMS JANUARY 2004 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2004 American Bureau of Shipping ABS
More informationMATERIALS AND WELDING 2014
Part 2: Rules for Materials and Welding Aluminum and Fiber Reinforced Plastics (FRP) Chapters 5-6) RULES FOR MATERIALS AND WELDING 2014 PART 2 ALUMINUM and FIBER REINFORCED PLASTICS (FRP) (CHAPTERS 5-6)
More informationTotal Quality Management. Quick and Accurate Response to Inquiries. As-Promised Deliveries. Fair and Competitive Prices
FORGED SHAPES 1 2 MISSION STATEMENT The Anderson Shumaker team is dedicated to earning your loyalty and gaining your trust through: Total Quality Management Quick and Accurate Response to Inquiries As-Promised
More informationUPC Locations. Brazil through Houston, TX
About The UPC Group A global organization specializing in the supply of steel products to the energy industry. Established in 1976 with the incorporation of Interpipe, Inc. in Houston, Texas to service
More informationforge monchieri TECHNOLOGY ENVIRONMENT
forge monchieri TECHNOLOGY ENVIRONMENT forge monchieri THE COMPANY A modern up-to-date mill with over 40 years of history. The company has earned an outstanding reputation and continues to be a leader
More informationOriginally presented at ASM International, Materials Solutions, Columbus, Ohio in October 2004 Richard Bolton MEng, AMIChemE, Area 42 Consulting
A User s Perspective 2014 Geoff B Associates This document is the property of the course instructor, prepared by the course instructor for exclusive use in the delivery of technical training programmes.
More informationSPECIFICATION FOR TITANIUM AND TITANIUM ALLOY CASTINGS
TECHNICAL LITERATURE: ASME SB-367 [ASTM B367] Company Website: www.metalspiping.com Your Reliable Supplier of Titanium & Nickel Alloys SB-367 SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY CASTINGS SB-367
More informationSpecial Fastener Solutions
Special Fastener Solutions INTERACTIVE CONTENTS: 1 Introduction 2 Materials 3 Petro-Chemical Fasteners 4 Products 5 Thread Forms and Ancillary Processes 6 Manufacturing & Quality 7 Experience & Markets
More informationDANIEL (DAN) J. TURNER, P.E. SENIOR STAFF CONSULTANT
18500 Trails End Road Conroe, TX 77385 DANIEL (DAN) J. TURNER, P.E. SENIOR STAFF CONSULTANT djturner@engsys.com Mr. Turner has performed engineering analysis for over ten years in Energy, Shipbuilding,
More informationASTM A105/A105M-10. Standard Specification for Carbon Steel Forgings for. Piping Applications ¹
Standard Specification for Carbon Steel Forgings for Piping Applications ¹ 1. Scope :- 1.1 This specification covers forged carbon steel piping components for ambient and higher temperature service in
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17945 First edition 2015-04-15 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
More informationIslamic Republic of Iran Ministry of Petroleum Vendor Evaluation Questionnaire
١- Company Information ١ ١- Company's name: Ex -Name: ١ ٢ -Parent Company (If any) ١ ٣ -Subsidiaries and associated concern Co: Date of establishment: Date and place of registration : Full address: Tel
More informationSPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS
TECHNICAL LITERATURE: ASME SB-381 [ASTM B381] Company Website: www.metalspiping.com Your Reliable Supplier of Titanium & Nickel Alloys SB-381 SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS ð13þ
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationCRA Clad or Lined Steel Pipe
CRA Clad or Lined Steel Pipe API SPECIFICATION 5LD FOURTH EDITION, MARCH 2015 API MONOGRAM PROGRAM EFFECTIVE DATE: SEPTEMBER 3, 2015 Special Notes API publications necessarily address problems of a general
More informationA NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND
A NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND C O M P A N Y P R O F I L E Established in 1968. With the support of the new valve team our aim are short lead times, exemplary quality and good customer
More information1.0 INTRODUCTION GENERAL SUPPLIER S RESPONSIBILITY CODES AND STANDARDS... 4
TABLE OF CONTENTS 1.0 INTRODUCTION... 3 1.1 GENERAL... 3 1.2 SUPPLIER S RESPONSIBILITY... 3 2.0 CODES AND STANDARDS... 4 2.1 CODES, STANDARDS AND REGULATIONS... 4 2.2 NEPTUNE ENERGY NETHERLANDS B.V. SPECIFICATIONS...
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationGlobal Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical
Global Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical Our pedigree Maher supplies advanced alloys for high performance applications. Founded in Sheffield
More informationCOMPANY PROFILE PRODUCT PORTFOLIO MARKET SEGMENTS / REFERENCES CONTACT WELDED PARTS
CASTINGS FORGINGS COMPANY PROFILE PRODUCT PORTFOLIO MARKET SEGMENTS / REFERENCES CONTACT WELDED PARTS METALLURGICAL AND ENGINEERING GROUP COMPANY PROFILE TRADITION - QUALITY - FLEXIBILITY Year of foundation:
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationDirective 97/23/EC Pressure Equipment
Directive 97/23/EC Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
More informationCONDITIONS OF CLASSIFICATION HIGH-SPEED CRAFT 2014
Part 1: Rules for Conditions of Classification High-Speed Craft RULES FOR CONDITIONS OF CLASSIFICATION HIGH-SPEED CRAFT 2014 PART 1 (Updated July 2014 see next page) American Bureau of Shipping Incorporated
More information+91-8048567308 New Seas Alloys L.L.P http://www.newseasalloys.in/ We are among the pioneers in the industry for manufacturer, exporter, trader and supplier a wide range of Steel Products. The offered products
More information+91-8048737818 Best Forgings India Private Limited http://www.forged-components.com/ We are a trusted manufacturer, exporter and supplier of high quality Ferrous and Non Ferrous Forged Components. Products
More informationRELIABLE PIPES & TUBES LTD.
RELIABLE PIPES & TUBES LTD. OHSAS 800:2007 CERTIFIED ISO 900:2008 CERTIFIED ISO 400:2004 CERTIFIED PED CERT NO 0 202 IND/Q--00 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel, Inconel,
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
More informationR. KIND GmbH Nochener Str Gummersbach / Germany Fon +49 (0) Fax +49 (0) THINKING STEEL.
R. KIND GmbH Nochener Str. 1-3 51647 Gummersbach / Germany Fon +49 (0) 2261 6033 3 Fax +49 (0) 2261 21 75 0 www.r-kind.de THINKING STEEL. Our challenge: to go beyond the limits of conventional forgings.
More informationRoxar Weight Loss Coupon Holder and Coupons 1 Retractable System
Roxar Weight Loss Coupon Holder and Coupons FA-T224-A Product Data Sheet 06.07.2015 Roxar Weight Loss Coupon Holder and Coupons 1 Retractable System Retractable Weight Loss Coupon Holder/Coupons Use of
More informationRycroft Process Solutions 1 PROCESS SOLUTIONS
Rycroft Process Solutions 1 PROCESS SOLUTIONS RYCROFT HAVE BEEN MANUFACTURERS OF PROCESS EQUIPMENT FOR OVER 25 YEARS. ORIGINALLY SUPPLYING PROCESS PACKAGES TO THE OFFSHORE AND MARINE SECTORS. RYCROFT STEADILY
More informationSUPPLIER QUALITY ASSURANCE REQUIREMENTS
The following supplier quality assurance requirements, referenced by number on the Purchase Order, are an integral part of each order placed by Groth Corporation or Groth Continental Manufacturing Private
More informationPrimary Application of Inconel, Nickel Alloy Welding Wires
Primary Application of Inconel, Nickel Alloy Welding Wires What is Inconel, Nickel Alloy Welding Wires? In the world, there are many grade of welding wires according to their chemical compositions. But,
More informationGUIDELINES FOR INSPECTION OF HULL WELDS
CCS Rule Change Notice For GUIDELINES FOR INSPECTION OF HULL WELDS Version: October 2017. RCN No.1 Effective date: 1 January, 2018 Beijing CHAPTER 3 QUALIFICATION TESTS OF WELDERS Section 1 General Provisions
More informationCompany profile. Company details
Company profile Since its foundation in 1976, in Nibbiano, Piacenza, Italy, Raccordi Forgiati (total area 41,000 sq m.) has been developing its position in the buttweld fittings market; in 2005, it was
More informationWelding Metallurgy Course
Welding Metallurgy Course COURSE OVERVIEW Welding Metallurgy forms an integral part of any business operating in the fabrication and welding environments which sometimes unfortunately commonly become contentious
More information+91-8048078804 Prayas Steel & Alloys http://www.stainlesssteelscraps.com/ We are importers, stockiest & suppliers of ferrous, non ferrous metal and scrap. Our range of ferrous & non ferrous metal products
More informationUnderstanding EN 10204:2004 Type 3.2 Certification. Working together for a safer world
Understanding EN 10204:2004 Type 3.2 Certification Working together for a safer world EN 10204:2004 Type 3.2 Certification INTRODUCTION History and Development of the Standard Applicability; Definitions
More informationThermowells Beware of Imitations
Technical Description TD/TP 001 Issue 1 Thermowells Beware of Imitations Pressure Vessel Codes and Thermowells When specifying and buying thermowells for the process industries there are some points that
More informationAstm A240 Steel Specification Technical Standard
Astm A240 Steel Specification Technical Standard 1 / 6 2 / 6 3 / 6 Astm A240 Steel Specification Technical ASTM Training and E-Learning. Train from your home or office with ASTM Webinar Training Series.
More informationSPECIFICATION FOR ALLOY STEEL FORGINGS FOR PRESSURE AND HIGH-TEMPERATURE PARTS
SPECIFICATION FOR ALLOY STEEL FORGINGS FOR PRESSURE AND HIGH-TEMPERATURE PARTS (Identical with ASTM Specification A 336/A 336M-96 except for clarified heat treatment requirements in 6.2.) 1. Scope 1.1
More informationStandard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts 1
Designation: A 336/A 336M 03a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts 1 This standard is issued under the fixed designation A 336/A 336M; the number immediately
More informationASTM B363-06a Standard Specification for Seamless and Welded Unalloyed
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings 1. Scope :- 1.1 This specification cover fittings intended for general corrosion resisting and elevated
More informationStandard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip 1
Designation: B 40 06 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip This standard is issued under the fixed designation B 40; the number immediately following the designation
More informationSUPPLIER QUALITY ASSURANCE REQUIREMENTS (SQAR)
The following supplier quality assurance requirements, referenced by number on the Purchase Order, are an integral part of each order placed by or Groth Continental Manufacturing Private Limited. Compliance
More informationMarhaba Steel & Welding LLC Venture of MAC Crescent FZE
Marhaba Steel & Welding LLC Venture of MAC Crescent FZE Steel Fabrication Foundry services in ferrous and non ferrous metals Machine Shop Industrial Services Lifting equipments and solutions. Container
More informationAstm A350 Lf2 Carbon Steel Abbey Forged Products
Astm A350 Lf2 Carbon Steel Abbey Forged Products 1 / 6 2 / 6 3 / 6 Astm A350 Lf2 Carbon Steel ASTM A350-LF2 Temperature range (-50 to 800 deg. F) Where corrosion resistance is not important. This material
More informationCERTIFICATE OF FIRE APPROVAL
LR427.203.2 CERTIFICATE OF FIRE APPROVAL This is to certify that The product detailed below will be accepted for compliance with the applicable Lloyd s Register Rules and Regulations and with the International
More informationVac Aero International. Heat Treating
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Vac Aero
More informationSPECIFICATION FOR COMMON REQUIREMENTS FOR STEEL FLANGES, FORGED FITTINGS, VALVES, AND PARTS FOR PIPING APPLICATIONS
SPECIFICATION FOR COMMON REQUIREMENTS FOR STEEL FLANGES, FORGED FITTINGS, VALVES, AND PARTS FOR PIPING APPLICATIONS 01 (Identical with ASTM Specification A 961-99.) 1. Scope 1.1 This specification covers
More informationMATERIALS AND WELDING 2017
Part 2: Rules for Materials and Welding Aluminum and Fiber Reinforced Plastics (FRP) Chapters 5-6) RULES FOR MATERIALS AND WELDING 2017 PART 2 ALUMINUM and FIBER REINFORCED PLASTICS (FRP) (CHAPTERS 5-6)
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION Licensed to Juan Rodriguez AMS 5754M Issued MAY 1954 Revised AUG 2007 Superseding AMS 5754L Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni
More informationCONVERSION OF SELF-ELEVATING UNITS TO OFFSHORE INSTALLATIONS
Guide for Conversion of Self- Elevating Units to Offshore Installations GUIDE FOR CONVERSION OF SELF-ELEVATING UNITS TO OFFSHORE INSTALLATIONS JUNE 2017 (Updated March 2018 see next page) American Bureau
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationA29/A29M-16 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM Volume 01.05, January 2018 Steel Bars, Forgings, Bearing, Chain, Tool A29/A29M-16 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought A108-13 Standard Specification
More informationThe Leading Global Stockholder and Supplier Pipes, Fittings & Flanges
The Leading Global Stockholder and Supplier Pipes, Fittings & Flanges www.specialpipingmaterials.com Super Duplex Duplex Stainless Steel Exotics Special Piping Materials (SPM) Established in 1989 with
More informationMANUFACTURING EXCELLENCE FROM SHEFFIELD
1 MANUFACTURING EXCELLENCE FROM SHEFFIELD CONTENTS A Passion For Steel Pride In The Past Purpose For The Future Our Products Sawing Forging Ring Rolling Heat Treatment Machining Our Products Express Service
More informationThe following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-3 First edition 2004-11-01 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges Industries du
More informationSPECIFICATIONS SECTION FLOOD CONTROL GATES. A. ASTM C 39 - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.
SPECIFICATIONS SECTION FLOOD CONTROL GATES PART 1 GENERAL 1.1 SECTION INCLUDES A. Flood Gates. 1.2 RELATED SECTIONS A. N/A. 1.3 REFERENCES A. ASTM C 39 - Standard Test Method for Compressive Strength of
More information(A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION,
(A) GENERAL: (A.1) PRATT & WHITNEY IS THE END USER. (A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION, ANALYSIS, AND APPROVAL
More informationStandard Specification for Forged Carbon and Alloy Steel. Flanges for Low-Temperature Service¹ ASTM A707/707M Scope :-
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service¹ 1. Scope :- 1.1 This specification covers forged carbon and alloy steel flanges intended primarily for petroleum
More informationAudit Report No: QE /12 - S. Hooks Industrial, Inc. Contact Person: Mr. John Valentine Phone: « »
Audit Report No: QE - 43699-2/12 - S Company Name: Hooks Industrial, Inc. Contact Person: Mr. John Valentine Phone: «281 251-9551» Report Date: 2013-10-22 Audit Dates: 2013-10-22-2013-10-22 Audit Duration:
More informationCOMPANY SHORT PRESENTATION
Single source supplier of complete piping packages ICARUS SA is a leading single source supplier of complete piping packages and manufacturer of specialty valves, compact flanges acc Norsok L-005 and tailor
More informationSince the beginning of the 20 th century, between tradition and innovation
Since the beginning of the 20 th century, between tradition and innovation Products Our main production consists of all standard flanges in addition to special custom components in accordance with all
More informationStandard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire 1
Designation: B 473 96 (Reapproved 2002) e Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire This standard is issued under the fixed designation B 473; the number
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY HOUSTON REGAL ROW 1 9925 Regal Row Houston, TX 77040 Richard Green Phone: 281 848 0270 MECHANICAL Valid To: January 31, 2020 Certificate
More informationMOBILE OFFSHORE UNITS
RULES FOR BUILDING AND CLASSING MOBILE OFFSHORE UNITS 2018 NOTICE NO. 1 JULY 2018 The following Rule Changes were approved by the ABS Rules Committee on 1 June 2018 and become EFFECTIVE AS OF 1 JULY 2018.
More informationLISTING INFORMATION OF Epilay - Superior, Ultra and Platinum Roofing Underlayments SPEC ID: Epilay Inc S. Main Street, E1 unit C
LISTING INFORMATION OF Epilay - Superior, Ultra and Platinum Roofing Underlayments SPEC ID: 30450 Epilay Inc. 21175 S. Main Street, E1 unit C Carson, CA 90745 This report is for the exclusive use of Intertek
More informationGS-Hydro Non-Welded Piping Solutions for Offshore
GS-Hydro Non-Welded Piping Solutions for Offshore Customer environment Customers GS-Hydro s non-welded piping systems are used in a number of applications in the offshore market. Drilling packages, ring
More information+91-8048762352 Steel Mart http://www.industrialalloysteel.com/ Steel Mart is one of the top most companies dealing with the export of steel tools, steel die, steel alloy, carbon steel, steel springs, stainless
More informationSECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSCORPIO VALVES & CONTROLS
COMPANY PROFILE 2015-16 SCORPIO VALVES & CONTROLS (A DIVISION OF SWAPNEEL COMPOSITE PVT LTD) www.scorpiovalves.com LIFELINE TO YOUR PROCESS SOLUTIONS An ISO 9001:2008 Certified Company INTRODUCTION SCORPIO
More informationNortheast Process Controls Tel: Fax: CLOSURES
TOOL-LESS TM CLOSURES For Blanking Off Pipeline Ends, Tank and Vessel Openings HISTORY Tube Turns was founded in 1927 in Louisville, Kentucky, US as the first American manufacturer of forged seamless pipe
More informationOFFSHORE STEEL PROGRAM - YOUR PREFERRED PARTNER
OFFSHORE STEEL PROGRAM - YOUR PREFERRED PARTNER www.norskstaal.no VISION Steel and metals are the important elements for the development of the sustainable society. Norsk Stål takes responsibility to continuously
More informationSA/EN National Parts 2.1 The National Foreword and the National Annexes, if any, do not apply for SA/EN
12-131 SPECIFICATION FOR STAINLESS STEEL Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes.
More informationStandard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service 1
Designation: B 67 98 AMERICAN SOCIETY FOR TESTING AND MATERIALS 00 Barr Harbor Dr., West Conshohocken, PA 9428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for
More informationJiangyin Donghao Stainless Steel Pipe Co., Ltd
Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000
More informationStandard Specification for Titanium and Titanium Alloy Forgings 1
Designation: B 381 06a Standard Specification for Titanium and Titanium Alloy Forgings 1 This standard is issued under the fixed designation B 381; the number immediately following the designation indicates
More informationNOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.
FORGED CARBON STEEL FITTINGS & FORGED STEEL UNIONS Screwed and Socket Welding Price Sheet CSF-5.18 Effective: May 7, 2018 Cancels Price Sheet CSF-7.17 of July 3, 2017 FOR THE MOST CURRENT PRODUCT/PRICING
More informationNOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.
FORGED CARBON STEEL FITTINGS & FORGED STEEL UNIONS Screwed and Socket Welding Price Sheet CSF-7.17 Effective: July 3, 2017 Cancels Price Sheet CSF-4.11 of April 18, 2011 FOR THE MOST CURRENT PRODUCT/PRICING
More informationAddendum Number Two Page 1 of 2
ADDENDUM NUMBER TWO University of South Carolina, Strom Thurmond Pool Deck Repairs on Outdoor Pool Architect s Project Number: U 747 12 1 State Project Number: H27 Z087 Columbia, South Carolina PREPARED
More informationEnergy Efficiency. Technical Solutions for Operational Challenges
Energy Efficiency Technical Solutions for Operational Challenges 1 Data Driven Analyses Today, the future of shipping is responsive to high fuel oil prices, along with stricter air emission and environmental
More information