Allied Machine & Engineering Corp. Accuport 432 Port Contour Cutters -1

Transcription

1 Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters -

2 Features and Benefits AMEC AccuPort 4 Port Contour Cutters are produced to strict manufacturing tolerances. This provides the customer with the assurance that the forms produced are within the finish tolerances of each specification. Drill and finish forms port in ONE operation Patent Pending Design For ports and stud ends with straight threads and o-ring sealing Eliminates the need for pre-drilling Allows for efficient set-up and production time Saves on tool cost Replaceable insert design eliminates regrinding and resetting AccuPort 4 Port Contour Form Inserts provide: Absolute repeatability Excellent surface finish Available with TiAlN Coated Inserts for longer tool life and increased productivity. Conforms to the following Port Standards: SAE J-96/ISO96-, and MS64* ISO 6-/SAE J-44/ with Identification Ridge SAE AS, (Formerly MilSpec MS-9) Through-body coolant supply is standard. Item Number Identification Key Imperial Port Contour Cutter: J96--75F Imperial Port Form Insert:J96--C5A J96 = SAE Port Contour Imperial Series J96 = SAE Port Contour Imperial Series 6 = Dash Number - Size = Insert Number = T-A Drill Series C5 = Carbide Grade C5 75 = Shank Diameter A = TiAlN Coating F = Flanged Shank Note: Proper cleaning of the insert pocket will insure the accuracy of this product. *SAE J-96 can be used in conjunction with SAE J-54 specifications. Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters

3 AMEC s Accuport 4 Port Contour Cutters are made to the following specifications: SAE J-96-/ISO 96- see pages -. Detail A ISO 6 - :99/SAE J-4/ with Identification Ridge see page 4. Detail A SAE AS / AND5 - (Formerly MilSpec MS-9) see page 5. Detail A Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters

4 Port Standards: SAE J-96- / ISO 96-, and MS-64 Item Numbers Dash Number Port Contour Cutter Number Port Thread Size Super Cobalt (TiAlN)* T-A Drill Item Numbers C5 Carbide (TiAlN)* Screw Driver Port Form Insert Item Numbers C5 Carbide (TiAlN) Inserts sold separately. Screw Driver - 4 J96-4Y-6F 7/6- UNF-B 5YA-.86 C5YA IP7 8IP-7 J96--C5A 76-IP8 8IP-8-5 J96-5Z-6F /- UNF-B 5ZA-.5 C5ZA IP7 8IP-7 J96--C5A 76-IP8 8IP-8-6 J96--75F 9/6-8 UNF-B 5A- C5A IP8 8IP-8 J96--C5A 76-IP8 8IP-8-8 J F /4-6 UNF-B 5A- C5A IP8 8IP-8 J96-7-C5A 76-IP8 8IP-8 - J96--F 7/8-4 UNF-B 5A-.5 C5A IP9 8IP-9 J96-7-C5A 76-IP8 8IP-8 - J96--5F /6- UN-B A-5 CA-5 75-IP5 8IP-5 J96-8-C5A 775-IP9 8IP-9-4 J96-4-5F /6- UN-B A-8 CA-8 75-IP5 8IP-5 J96-8-C5A 775-IP9 8IP-9-6 J96-6-5F 5/6- UN-B A- CA- 75-IP5 8IP-5 J96-8-C5A 775-IP9 8IP-9 - J96--5F 5/8- UN-B 45H-9 C5A IP 8IP- J96--C5A 775-IP9 8IP-9-4 J96-4-5F 7/8- UN-B 45H-45.5 C5A IP 8IP- J96--C5A 775-IP9 8IP-9 - J96-4-5F /- UN-B 454H-6.5 N/A 754-IP 8IP- J96--C5A 775-IP9 8IP-9 Patent Pending Indicates metric dimension Dash Number Port Contour Cutter Number Port Thread Size ❶ - 4 J96-4Y-6F 7/6- UNF-B - 5 J96-5Z-6F /- UNF-B - 6 J96--75F 9/6-8 UNF-B - 8 J F /4-6 UNF-B - J96--F 7/8-4 UNF-B - J96--5F /6- UN-B -4 J96-4-5F /6- UN-B -6 J96-6-5F 5/6- UN-B - J96--5F 5/8- UN-B -4 J96-4-5F 7/8- UN-B - J96-4-5F /- UN-B * T-A Drill Inserts available with various coatings and geometries. Please see T-A Drilling System Catalog. ** AccuPort 4 Port Contour Cutters are available with extended pilot (L). Please see page. A **L B C L L L4 D L5 L6 Minor Spotface Seal Shank Shank Angle OAL 9,8 4,,4,5,7 8,8,8 5,9 47,6 86,4 Minor Seal Angle Seal Angle Total Head Spotface to Shoulder ,5 4,, 4,,7 8,8,4 5,9 47,6 86, , 5,5 4,6 5,7,7 47, 9, 9, 5 97, ,5 7,5,7 5,7,7 5, 9, 9, 5, ,5, 4, 5 4,,7 54,4, 5,4 57,9, ,, 4, 5 9,,5 67, 8,9,8 57,9 5, ,, 45, 5,4,5 67, 8,,8 57,9 5, ,, 48,5 5 5,6,5 67, 7,5,8 57,9 5, ,, 58,7 5 4,6,5 77,8 46,6 8, 68, 46, ,5, 65, 5,9,5 77,8 45, 8, 68, 46, ,5, 88, 5 65,8,5 96,8,8 8, 68, 65, ❶Availability Codes Stocked. Subject to prior sale. Currently stocked in limited quantities. Advanced planning is recommended. Non-stocked Standard Delivery Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters

5 Port Standards: SAE J-96- / ISO 96-, and MS-64 with extended minor diameter lengths (L) Patent Pending Indicates metric dimension Dash Number Port Contour Cutter Number Port Thread Size ❶ - 4 X96-4Y-6F 7/6- UNF-B - 5 X96-5Z-6F /- UNF-B - 6 X96--75F 9/6-8 UNF-B - 8 X F /4-6 UNF-B - X96--F 7/8-4 UNF-B - X96--5F /6- UN-B -4 X96-4-5F /6- UN-B -6 X96-6-5F 5/6- UN-B - X96--5F 5/8- UN-B -4 X96-4-5F 7/8- UN-B - X96-4-5F /- UN-B A L B C L L L4 D L5 L6 Seal Seal Total Spotface to Minor Spotface Seal Angle Angle Head Shoulder Shank Shank Minor Angle OAL 9,8.,4,5,7 45,,8 5,9 47,6 9, ,5., 4,,7 45,,4 5,9 47,6 9, ,.8 4,6 5,7,7 5,5 9, 9, 5, ,5.8,7 5,7,7 56,7 9, 9, 5 6, ,5 6. 4, 5 4,,7,7, 5,4 57,9 8, , 9. 4, 5 9,,5 7,4 8,9,8 57,9, , 9. 45, 5,4,5 7,4 8,,8 57,9, , 9. 48,5 5 5,6,5 7,4 7,5,8 57,9, , 9. 58,7 5 4,6,5 84, 46,6 8, 68,, , , 5,9,5 84, 45, 8, 68,, , , 5 65,8,5,,8 8, 68, 7, Made to order tool specifications - Priced on Request Fax or mail a copy of the table below to AMEC s Application Engineering Department () to receive pricing for a made to order AccuPort 4 Port Contour Cutter. A L B L5 D L6 L7 Spotface to Dash Number Specification Port Thread Size Minor Minor Spotface Shoulder Shank Shank OAL J96 ISO 6 AS ISO 6 (without ridge) Company Name Contact Name Telephone Distributor Name Fax Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters

6 Item Numbers Dash Number Port Standards: ISO 6-:99, SAE J-44/ Port Contour Cutter Number Port Thread Size Super Cobalt (TiAlN)* T-A Drill Item Numbers C5 Carbide (TiAlN)* Screw Driver Port Form Insert Item Numbers C5 Carbide (TiAlN) Inserts sold separately. Screw RY-6FM M X.5 5YA-.5 C5YA IP7 8IP-7 6-R-C5A 76-IP8 8IP RZ-6FM M4 X.5 5ZA-.5 C5ZA IP7 8IP-7 6-R-C5A 76-IP8 8IP R-FM M6 X.5 5A-4.5 C5A IP8 8IP-8 6-R-C5A 76-IP8 8IP R-FM M8 X.5 5A-6.5 C5A IP8 8IP-8 6-R-C5A 76-IP8 8IP-8-6-R-5FM M X.5 5A-.5 C5A IP9 8IP-9 6-R-C5A 76-IP8 8IP-8-6-R-FM M7 X A-5 CA-5 75-IP5 8IP-5 6-6R-C5A 76-IP8 8IP R-FM M X A-8 CA*-8 75-IP5 8IP-5 6-6R-C5A 76-IP8 8IP R-FM M X A- CA- 75-IP5 8IP-5 6-9R-C5A 775-IP9 8IP-9-6-R-4FM M4 X 45H-4 C5A IP 8IP- 6-R-C5A 775-IP9 8IP R-4FM M48 X 45H-46 C5A IP 8IP- 6-R-C5A 775-IP9 8IP-9-6-R4-4FM M X 454H-58 N/A 754-IP 8IP- 6-9R-C5A 775-IP9 8IP-9 Driver Patent Pending Indicates metric dimension A L B C L L L4 Spotface D L5 L6 Dash Port Contour Port Thread Spotface Seal Total to Minor Seal Seal Angle Angle Head Shoulder Shank Shank Number Cutter Number Size ❶ Minor w/ridge Angle OAL RY-6FM M X.5,5 4, 4, 5,8,4 8,8,6 6, 4,9 8, RZ-6FM M4 X.5,5 4, 6, 5 5,8,4 8,8, 6, 4,9 8, R-FM M6 X.5 4,5 5,5 8, 5 7,8,4 47, 8,7, 4,9 89, R-FM M8 X.5 6,5 7,, 5 9,8,4 5, 9,9, 4,9 9, R-5FM M X.5,5 8, 4, 5,8,4 54,4, 5, 5, 7, R-FM M7 X 5,, 4, 5 9,4, 67, 9,9, 57,9 5, R-FM M X 8,, 4, 5,4, 67, 9,, 57,9 5, R-FM M X,,, 5 5,4, 67, 8,5, 57,9 5, R-4FM M4 X 4,,5, 5 44,4, 77,8 46,9 4, 7, 47, R-4FM M48 X 46, 5, 66, 5 5,4, 77,8 4, 4, 7, 47, R4-4FM M X 58, 7,5 76, 5 6,4, 96,8 57, 4, 7, 66, * T-A Drill Inserts available with various coatings and geometries. Please see T-A Drilling System Catalog. AccuPort 4 Port Contour Cutters without identification ridge are available and priced on request. For tools made to your requirements see page for details. ❶Availability Codes Stocked. Subject to prior sale. Currently stocked in limited quantities. Advanced planning is recommended. Non-stocked Standard Delivery 4 Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters

7 Port Standards: SAE AS (Formerly MilSpec MS-9) Also Conforms to AND5 Using Alternate Tap Drill Diameter (shown in red) Item Numbers Dash Number Port Contour Cutter Number Port Thread Size Super Cobalt (TiAlN)* T-A Drill Item Numbers C5 Carbide (TiAlN)* Screw Driver Port Form Insert Item Numbers C5 Carbide (TiAlN) Inserts sold separately. Screw - 4 AS-4Y-6F 7/6- UNJF-B 5YA-.9 C5YA IP7 8IP-7 AS-4-C5A 76-T8 8T-8 7/6- UNF-B 5YA-.86 C5YA AS-5Z-6F /- UNJF-B 5ZA-.5 C5ZA IP7 8IP-7 AS-5-C5A 76-T8 8T-8 /- UNF-B 5ZA-.45 C5ZA AS-6Z-75F 9/6-8 UNJF-B 5ZA-.5 C5ZA IP7 8IP-8 AS-6-C5A 76-T8 8T-8 9/6-8 UNF-B 5ZA-.56 C5ZA AS-8-75F /4-6 UNJF-B 5A-7.5 C5A IP8 8IP-8 AS-8-C5A 76-T8 8T-8 /4-6 UNF-B 5A- C5A- - AS--F 7/8-4 UNJF-B 5A-.5 C5A IP9 8IP-9 AS--C5A 75-T5 8T-5 7/8-4 UNF-B 5A-.8 C5A-.8 - AS--5F /6- UNJ-B A-5 CA-5 75-IP5 8IP-5 AS--C5A 75-T5 8T-5 /6- UN-B A-.976 CA AS-4-5F /6- UNJ-B A-.9 CA IP5 8IP-5 AS-4-C5A 75-T5 8T-5 /6- UN-B A-8 CA-8-6 AS-6-5F 5/6- UNJ-B A-.4 CA IP5 8IP-5 AS-6-C5A 75-T5 8T-5 5/6- UN-B A-.6 CA-.6 - AS--5F 5/8- UNJ-B 45H-.547 C5A IP 8IP- AS--C5A 75-T5 8T-5 5/8- UN-B 45H-9 C5A-9-4 AS-4-5F 7/8- UNJ-B 45H-.797 C5A IP 8IP- AS-4-C5A 75-T5 8T-5 7/8- UN-B 45H-45.5 C5A AS-4-5F /- UNJ-B 454H-.4 N/A 754-IP 8IP- AS--C5A 75-T5 8T-5 /- UN-B 454H-.4 N/A Driver A = AND5 Specifications (shown in red) A = SAE AS Specifications Patent Pending Indicates metric dimension Dash Number Port Contour Cutter Number Port Thread Size ❶ - 4 AS-4Y-6F 7/6- UNJF-B - 5 AS-5Z-6F /- UNJF-B - 6 AS-6Z-75F 9/6-8 UNJF-B - 8 AS-8-75F /4-6 UNJF-B - AS--F 7/8-4 UNJF-B - AS--5F /6- UNJ-B -4 AS-4-5F /6- UNJ-B -6 AS-6-5F 5/6- UNJ-B - AS--5F 5/8- UNJ-B -4 AS-4-5F 7/8- UNJ-B - AS-4-5F /- UNJ-B A A L B L C D L L4 E L5 L6 Spotface to Shoulder Minor Seal Total Pilot Pilot Seal Angle Angle Spotface Head Shank Shank OAL 9,8 9,9 6,79,5, 4,4,,76 4,58 5,88 47,6 89, ,45,5 6,79,, 5,88,7,9 4,58 5,88 47,6 89, ,85,95 8,4 4,7, 7,46 4,87 8,4,8 9,5 5, 99, ,46 7,5, 9,5,9, 8,57 5, 9,5 5,, ,5,75,76,7 5,46 4,9,9 58,7 5,4 57,94 6, ,8 5, 7,5 7,58,8,4 4,5 7,94 7,75 57,94 8, , 8,7 7,5,76,8 4,6 45,9 7, 7,75 57,94 8, ,5,4 7,5,9,8 7,77 48,77 6,5 7,75 57,94 8, , 9,9 8,47 4,86,8 45,69 57,9 44, 8,95 8, 68,8, ,5 45, 8,75 48,,8,7 65,8 4,58 8,95 8, 68,8, , 6, 4,87,,8 67,97 88,65 45,78 9,65 8, 68,8 6, Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters 5

8 8, 5, L4, etc.,, 5,, 44, etc., 4, 5, 7, 4, 5, etc. 44, 54, 8, etc. 44, 4V, M, etc. A6, A85, A56, etc. Hastelloy B, Inconel, etc., 46, 4, 7-4 PH, etc. H-, H-, A-4, -, S-, etc. Aluminum Gray, Ductile, Nodular Recommended Speeds and Feeds Tool Steel Grade PC PC SC TiN SFM TiAlN SFM and Carbide - Inch TiCN SFM Feed Rates (IPR) for Drill Insert Series CARBIDE 8, 5, L4, etc.,, 5,, 44, etc., 4, 5, 7, 4, 5, etc. 44, 54, 8, etc. 44, 4V, M, etc. A6, A85, A56, etc. Hastelloy B, Inconel, etc., 46, 4, 7-4 PH, etc. H-, H-, A-4, -, S-, etc. Aluminum Gray, Ductile, Nodular Carbide Grade C5/K C5/K, C/K, C/K, C/K, C/K, C/K TiN SFM TiAlN SFM Feed Rates (IPR) for Drill Insert Series - 4. * Parameters shown are only starting points. Speed should be calculated using the drill diameter. Due to the short drill distance required, speed and feed rates can possibly be elevated. Coolant through the cutter is preferred. Flood, Mist or Air coolant can also be used. No spot drilling, pre-drilling, or dwell required. 6 Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters.....

9 Coolant Recommendations and Carbide - Inch Coolant through the cutter is preferred. Flood, Mist or Air coolant can also be used. 8, 5, L4, etc. - 5,, 5,, 44, etc , 4, 5, 7, 4, 5, etc , 54, 8, etc , 4V, M, etc. 5-4 A6, A85, A56, etc. - 5 Hastelloy B, Inconel, etc. 4 -, 46, 4, 7-4 PH, etc H-, H-, A-4, -, S-, etc. 5-5 Aluminum - Gray, Ductile, Nodular - Coolant Pressure (PSI) Coolant Volumetric Flowrate (GPM) CARBIDE 8, 5, L4, etc. - 5,, 5,, 44, etc , 4, 5, 7, 4, 5, etc , 54, 8, etc , 4V, M, etc. 5-4 A6, A85, A56, etc. - 5 Hastelloy B, Inconel, etc. 4 -, 46, 4, 7-4 PH, etc H-, H-, A-4, -, S-, etc. 5-5 Aluminum - Gray, Ductile, Nodular - Coolant Pressure (PSI) Coolant Volumetric Flowrate (GPM) Formulas: IPM = (RPM) (IPR) SFM = (RPM) (.4) (DIA) RPM = (SFM) () (.4) (DIA) Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters 7

10 8, 5, L4, etc.,, 5,, 44, etc., 4, 5, 7, 4, 5, etc. 44, 54, 8, etc. 44, 4V, M, etc. A6, A85, A56, etc. Hastelloy B, Inconel, etc., 46, 4, 7-4 PH, etc. H-, H-, A-4, -, S-, etc. Aluminum Gray, Ductile, Nodular Recommended Speeds and Feeds Tool Steel Grade PC PC SC TiN M/min TiAlN M/min and Carbide - Metric TiCN M/min ,8,8 9,8, Feed Rates (mm/rev) for Drill Insert Series,5,5-4,5,5,5,56,56,6,56 4,58,58,58,58,58,5,5,58,5,5,5,,,69,,5 CARBIDE 8, 5, L4, etc.,, 5,, 44, etc., 4, 5, 7, 4, 5, etc. 44, 54, 8, etc. 44, 4V, M, etc. A6, A85, A56, etc. Hastelloy B, Inconel, etc., 46, 4, 7-4 PH, etc. H-, H-, A-4, -, S-, etc. Aluminum Gray, Ductile, Nodular Carbide Grade C5/K C5/K, C/K, C/K, C/K, C/K, C/K TiN M/min TiAlN M/min Feed Rates (mm/rev) for Drill Insert Series.,45,45,5,45-4,5,45,45,45,45,,5,58,5,45 * Parameters shown are only starting points. Speed should be calculated using the drill diameter. Due to the short drill distance required, speed and feed rates can possibly be elevated. Coolant through the cutter is preferred. Flood, Mist or Air coolant can also be used. No spot drilling, pre-drilling, or dwell required. 8 Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters

11 Coolant Recommendations and Carbide - Metric Coolant through the cutter is preferred. Flood, Mist or Air coolant can also be used. 8, 5, L4, etc. - 5,, 5,, 44, etc , 4, 5, 7, 4, 5, etc , 54, 8, etc , 4V, M, etc. 5-4 A6, A85, A56, etc. - 5 Hastelloy B, Inconel, etc. 4 -, 46, 4, 7-4 PH, etc H-, H-, A-4, -, S-, etc. 5-5 Aluminum - Gray, Ductile, Nodular - Coolant Pressure (KPa) Coolant Volumetric Flowrate (LPM) ,5-9,8, ,7-9,7 6,5 -, 45,, , - 9,5 9, - 9,8 4, - 5,9,7-6,5 4,6-45, ,7-9, 8,7-9,8,6-5,5 8,9 -,7 7,9-45, ,7-9, 8, - 9,, - 4,8 8,9 -,7 4, - 7, ,7-9, 7,9-8,, -,7 5, - 8,9 6,5 -, ,7-9, 9, - 9,8, - 4,8 8,9 -,7 4, - 7, ,7-9, 8, - 8,7,7 -, 5, - 8,9 6,5 -, , - 9,5 8,7-9,8, - 4, 8,9 -,7 4, - 7, ,7-9, 7,9-8,, -,7 5, - 8,9 6,5 -, ,8 -,,5-4,, -,, - 4, 5, -, ,7-9, 8, - 8,7,7 -,5 5, - 8,9, - 4, CARBIDE 8, 5, L4, etc. - 5,, 5,, 44, etc , 4, 5, 7, 4, 5, etc , 54, 8, etc , 4V, M, etc. 5-4 A6, A85, A56, etc. - 5 Hastelloy B, Inconel, etc. 4 -, 46, 4, 7-4 PH, etc H-, H-, A-4, -, S-, etc. 5-5 Aluminum - Gray, Ductile, Nodular - Coolant Pressure (KPa) Coolant Volumetric Flowrate (LPM) , 6, 5, 4,5 7,9 75 9,4,,6 6,5 6, ,,5,,8 57, ,, 9,,, ,4 9,,6 8,8, ,8, 7,5 7,8 47, ,,5,9 5,4 6, , 6, 6, 44, 75, ,4 9,,6 9,7 6, ,4 8,8 9, 47, 77, ,7,8 5,4 6,5 48,7 Formulas: mm/min = (RPM) (mm/rev) M/min = (RPM) (.4) (DIA) RPM = (M/min) () (.4) (DIA) Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters 9

12 T-A Drilling System Our T-A Drilling System combines premium material, unique geometry and coatings to enable customers to achieve the highest level of drill performance. The two-piece design provides the means to quickly change worn tools, and allows production to resume without any machine adjustment. Customer drill insert inventory is kept at a minimum by the ability to interchange within a holder series, a wide range of drill insert sizes, materials, and coatings. Literature Order Number: USTAC ALVAN Reamers The ALVAN product line includes both monobloc and ring style expandable reamers offered with carbide, cermet, PCD and CBN cutting edges and are available in sizes from.8 inch to inch (5.8 mm to.6 mm) diameter. This high performance reaming product provides a lower cost per hole through its high penetration rates, making it an ideal choice for finishing holes in a production environment. Wheel Drilling System Literature Order Number: ALV-4 T-A LUG HOLE AND VALVE HOLE TOOLS A unique drilling system designed for the Aluminum Automotive Wheel Industry. AMEC s engineering staff will evaluate your application and respond with a quotation (through your distributor) and a design to meet your requirements. Literature Order Number: 96RDAMC ASC Solid Carbide HIGH PENETRATION DRILLS ASC Solid Carbide Drills feature a patent-pending geometry for - mm diameter product range and are available in.5x, 6X and 9X drill depth to diameter lengths. These High Penetration Drills provide high productivity and the unique combination of its geometry and coatings allows for use in wide range of applications. T-A Advanced QDS QUICK DELIVERY SPECIALS Literature Order Number: ASC- T-A Drilling System HIGH PERFORMANCE HOLDERS AND INSERTS Designed specifically for use on structural steel materials, this patent-pending system delivers Outstanding Performance and Durability. TiAlN insert coating allows for increased tool life and better heat resistance while providing better hole tolerances. tool holders can be used with standard T-A Drill Inserts Literature Order Number: SS-4 AMEC s quick delivery concept, offers a fast and effective way to provide reliable and cost effective solutions for your drilling applications. Indexable Carbide (ICS) Drills, Chrome Helix and Bushing Drills combined with several shank options are available through Advanced QDS. Literature Order Number: A-QDS- High Performance and Universal Style DRILLS, HOLDERS AND ACCESSORIES This catalog lists the widest variety of Spade Drills and Holders in the industry. Our TiN, TiAlN and TiCN Coated High Performance Spade Drills (/" to 5") offer a % to 5% INCREASE IN PRODUCTIVITY and an EXTENDED TOOL LIFE of to times over uncoated tools. Literature Order Number: SDC 4 Allied Machine & Engineering Corp. Literature Order Number: AP4-5