Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
|
|
- Eustace Carter
- 6 years ago
- Views:
Transcription
1 ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45
2 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve Expanded View 1. ody: Newco cast steel bodies provide low resistance flow and optimum strength and performance. 2. onnet: Newco bonnet assemblies are built to the same standards as the bodies. 3. ack Seat: The back seat, when engaged with the stem head, provides a stable shutoff to the stuffing box which isolates the packing from flow exposure. 4. Stem: The stem inserts vertically into the disc. 5. Disc: Newmans 1-piece vented disc is machined to the tightest tolerances to ensure trouble free shutoff and cycling. 6. Disc Nut: The disc nut serves as a mechanical guide acting on the stem to ensure proper alignment of the disc to the seat. 7. Gland: ompresses the packing to create a stem seal above the back seat, between the bonnet and stem. 8. Gland Flange: Applies pressure to the gland for accurate packing adjustments. 9. & 10. Gland olts & Nuts: The gland bolt and nut allows for easy adjustments for packing compression. 11. Gland olt Pin: The gland bolt pin secures the gland bolts to the yoke & bonnet. 12. Packing: The packing creates a seal above the back seat, between the bonnet and stem. 13. Stuffing ox: The stuffing box contains the packing. 14. Stem Nut: The stem nut provides a precision guide for proper stem alignment. 15. Handwheel: The handwheel cycles the valve. 16. Handwheel Nut: The handwheel nut secures the handwheel to the bonnet assembly. 17. Handwheel Washer: The washer helps to prevent loosening or distributes pressure evenly. 18. onnet Gasket: The bonnet gasket creates a leakproof seal between the bonnet and body. 19. & 20. onnet Studs & Nuts: The bonnet studs and nuts secure the bonnet to the body. 21. : To ensure a stable shutoff, the seat ring is aligned and seal-welded into the valve, then precision ground for optimal seating. 22. Disc Guide: The disc guides provide a stable track for keeping the disc aligned with the seat during cycling Vent 5 46
3 Newco ast arbon Steel olted onnet Valves ast Steel olted over Stop hecks Styles: 2, 3, & 4/2 lass: Sizes: 2 thru 14 Pressure lass Range: 150 thru 1500 Valve Design: ASME 16.34/API 600 Flange Dimensions: ASME 16.5, (Series A) Face-to-Face Dimensions: ASME (open) A-W Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody ASTM A216-W Gland olt Pins ASTM A36 ASTM A216-W/ ASTM A216-W/ ASTM A216- Gland olts ASTM A307- ASTM A193-7M 13% hrome W/316 ASTM A105/** onnet ASTM A216-W Nameplate ASTM A *onnet Gasket Spiral Wound 316 Stainless Steel/Graphite Nameplate Rivets ommercial onnet Nuts ASTM A194-2H ASTM A194-2HM Disc Nut ASTM A ASTM A onnet Studs ASTM ASTM A193-7M Stem Nut ASTM A439-D2 ack Seat ushing ASTM A ASTM A Handwheel Washer ASTM A36 *Packing Graphite W/raided arbon Fiber End Rings Handwheel Nut ASTM A36 Gland Flange ASTM A276-W Spacer Ring N/A ** Integral seat w/ for sizes 2 to 4. lass 150 Size nps dn in mm A-W in mm in mm in mm RF lbs Wt. kg W lbs Wt. kg
4 Newco ast arbon Steel olted onnet Valves ast Steel olted over Stop hecks Styles: 2, 3, & 4/2 lass: Sizes: 2 thru 14 Pressure lass Range: 150 thru 1500 Valve Design: ASME 16.34/API 600 Flange Dimensions: ASME 16.5, (Series A) Face-to-Face Dimensions: ASME (open) A-W Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody ASTM A216-W Gland olt Pins ASTM A36 ASTM A216-W/ ASTM A216-W/ ASTM A216- Gland olts ASTM A307- ASTM A193-7M 13% hrome W/316 ASTM A105/** onnet ASTM A216-W Nameplate ASTM A *onnet Gasket Spiral Wound 316 Stainless Steel/Graphite Nameplate Rivets ommercial onnet Nuts ASTM A194-2H ASTM A194-2HM Disc Nut ASTM A ASTM A onnet Studs ASTM ASTM A193-7M Stem Nut ASTM A439-D2 ack Seat ushing ASTM A ASTM A Handwheel Washer ASTM A36 *Packing Graphite W/raided arbon Fiber End Rings Handwheel Nut ASTM A36 Gland Flange ASTM A276-W Spacer Ring N/A ** Integral seat w/ for sizes 2 to 4. lass 300 Size nps dn in mm A-W in mm in mm in mm RF lbs Wt. kg W lbs Wt. kg
5 Newco ast arbon Steel olted onnet Valves ast Steel olted over Stop hecks Styles: 2, 3, & 4/2 lass: Sizes: 2 thru 8 Pressure lass Range: 150 thru 1500 Valve Design: ASME 16.34/API 600 Flange Dimensions: ASME 16.5, (Series A) Face-to-Face Dimensions: ASME A-W Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody ASTM A216-W Gland olt Pins ASTM A36 ASTM A216-W/ ASTM A216-W/ ASTM A216- Gland olts ASTM A307- ASTM A193-7M 13% hrome W/316 Integral ASTM A216 W/ onnet ASTM A216-W Nameplate ASTM A *onnet Gasket Soft Steel Ring Joint Nameplate Rivets ommercial onnet Nuts ASTM A194-2H ASTM A194-2HM Disc Nut ASTM A ASTM A onnet Studs ASTM ASTM A193-7M Stem Nut ASTM A439-D2 ack Seat ushing ASTM A ASTM A Handwheel Washer ASTM A36 *Packing Graphite W/raided arbon Fiber End Rings Handwheel Nut ASTM A36 Gland Flange ASTM A276-W Spacer Ring ASTM A lass 600 Size nps dn in mm A-W in mm in mm in mm RF lbs Wt. kg W lbs Wt. kg
6 Newco ast arbon Steel olted onnet Valves ast Steel olted over Stop hecks Styles: 2, 3, & 4/2 lass: Sizes: 2 thru 8 Pressure lass Range: 150 thru 1500 Valve Design: ASME 16.34/API 600 Flange Dimensions: ASME 16.5, (Series A) Face-to-Face Dimensions: ASME A-W Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody ASTM A216-W Gland olt Pins ASTM A36 ASTM A216-W/ ASTM A216-W/ ASTM A216- Gland olts ASTM A307- ASTM A193-7M 13% hrome W/316 Integral ASTM A216 W/ onnet ASTM A216-W Nameplate ASTM A *onnet Gasket Soft Steel Ring Joint Nameplate Rivets ommercial onnet Nuts ASTM A194-2H ASTM A194-2HM Disc Nut ASTM A ASTM A onnet Studs ASTM ASTM A193-7M Stem Nut ASTM A439-D2 ack Seat ushing ASTM A ASTM A Handwheel Washer ASTM A36 *Packing Graphite W/raided arbon Fiber End Rings Handwheel Nut ASTM A36 Gland Flange ASTM A276-W Spacer Ring ASTM A lass 900 Size nps dn in mm A-W in mm in mm in mm RF lbs Wt. kg W lbs Wt. kg
7 Newco ast arbon Steel olted onnet Valves ast Steel olted over Stop hecks Styles: 2, 3, & 4/2 lass: Sizes: 2 thru 8 Pressure lass Range: 150 thru 1500 Valve Design: ASME 16.34/API 600 Flange Dimensions: ASME 16.5, (Series A) Face-to-Face Dimensions: ASME A-W Typical ill of Materials (See page 5 for available materials.) omponent 2 3 4/2 omponent 2 3 4/2 ody ASTM A216-W Gland olt Pins ASTM A36 ASTM A216-W/ ASTM A216-W/ ASTM A216- Gland olts ASTM A307- ASTM A193-7M 13% hrome W/316 Integral ASTM A216 W/ onnet ASTM A216-W Nameplate ASTM A *onnet Gasket Soft Steel Ring Joint Nameplate Rivets ommercial onnet Nuts ASTM A194-2H ASTM A194-2HM Disc Nut ASTM A ASTM A onnet Studs ASTM ASTM A193-7M Stem Nut ASTM A439-D2 ack Seat ushing ASTM A ASTM A Handwheel Washer ASTM A36 *Packing Graphite W/raided arbon Fiber End Rings Handwheel Nut ASTM A36 Gland Flange ASTM A276-W Spacer Ring ASTM A lass 1500 Size nps dn in mm A-W in mm in mm in mm RF lbs Wt. kg W lbs Wt. kg
NEWCO. Cast Steel Valves. Technical Data TC9308-3
NEWCO Cast Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures
More informationProduct Line Technical Data
NEWO - ast Steel olted onnet Valves orporate Headquarters Stafford, Texas 13127 Trinity Dr. Stafford, TX 77477 Tel: 281.302.4900 Fax: 281.302.4801 Manufacturer of Table of ontents Introduction...1 NEWMANS
More informationMaster Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
More informationFasani Pressure Seal Cast gate Valves - Style B WEDGE GATE
A wide range of gate valves specifically designed for high pressure and high temperature applications. Features GENERAL APPLICATION Our pressure seal gate valves are recommended for a large variety of
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationLUNKENHEIMER FIGURE K4050 INLINE Y-BODY DN ASME CLASS 150
DN 50-500 ASME CLASS 150 The K4050 inline Y-body isolation valve is specially designed for severe service in alumina and mining applications where scale and erosion are present. FEATURES GENERAL APPLICATION
More informationCOMMERCIAL VALVES. When QUALITY, SERVICE and PRICE MATTER MOST! GATE VALVES GLOBE VALVES CHECK VALVES BUTTERFLY VALVES
COMMERCIAL CONSTRUCTION FIRE PROTECTION HVAC IRRIGATION MINING WATER & WASTE MANAGEMENT OIL & GAS POWER GENERATION When QUALITY, SERVICE and PRICE MATTER MOST! COMMERCIAL VALVES GATE VALVES GLOBE VALVES
More informationSERIES 19 Segmented Ball Valves. Size Range: 1-12 Carbon Steel, Stainless Steel, Optional Special Alloys ASME Classes 150, 300 & 600
SERIES 19 Segmented Ball Valves Size Range: 1 - Carbon Steel, Stainless Steel, Optional Special Alloys ASME Classes 15, 3 & Flow-Tek Series 19 is a versatile Segmented Ball Valve designed for throttling
More information88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More information88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
More information88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 ( NPS 2 to 12 ) Flanges R.F. CLASS 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Rising rotating stem Bolted bonnet
More information88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
More information87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
More information87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
More informationBONT BONT BONT. Forged Steel Gate Valves. NPS 1/2 2 ASME Class 800 & Forged Steel Globe Valves. NPS 1/2 2 ASME Class 800 & 1500
BONT Forged Steel Gate Valves NPS 1/2 2 ASME Class 800 & 1500 BONT Forged Steel Globe Valves NPS 1/2 2 ASME Class 800 & 1500 BONT Forged Steel Check Valves NPS 1/2 2 ASME Class 800 & 1500 GENERAL INFORMATION
More informationDirect contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
More informationKEYSTONE SLIDE GATE VALVES FIGURE 215
Slide through, O-port gate design for severe service applications FEATURES GENERAL APPLICATION For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining
More informationFigure 215. Slide through, O-port gate design for severe service applications. Features
Slide through, O-port gate design for severe service applications Features General Application For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More information8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
More informationVALVES AIL FORGED STEEL GATE, GLOBE & CHECK. ASME Class AUDCO INDIA LIMITED. 8mm - 50mm (1/4-2 )
AIL FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) API 602 S 5352 S 6364 ASME 16.34 MSS SP 84 AUDCO INDIA LIMITED Introduction AIL Forged Steel Gate, Globe and Check Valves have
More informationBaumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
More information88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
More informationProduct data sheet Dynaxe - L162GD Valves High Performance - Double Excentric Dynaxe L162
DESIGN Body Flangeless wafer type (lugged) End Connection EN 1092 PN 25, 40 ASME B16.5 cl. 300 / B16.47 cl. 300 MSS SP 44 cl. 300 Face to Face EN558-1/2 Series 16 Disc Seat Replaceable Shaft Seal Design
More informationCryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the control of are available
More informationStainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
More informationLow Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
More informationSUFA STEEL GLOBE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA STEEL GLOBE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Globe valves are used where throttling or both throttling and shut off are required. They can
More information87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
More informationBaumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationCarbon steel or Stainless steel
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure
More informationBSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
More informationA. This Section includes the following general-duty valves: 1. Division 15 Section "Mechanical Identification" for valve tags and charts.
D-9 OUTLINE SPECIFICATION FOR HTHW VALVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More information88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
More informationGlobe Valve. Regulating. Service
Globe Valve Regulating Service Globe Valves FM Globe Valves are used in applications requiring throttling and frequent operations. FM Parabolic, Vee-type regulating, Swivel and guided plug and stem, Soft
More informationbrands you trust. STOCKHAM - Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. STOCKHAM - Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & enefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering:
More informationBolted Three Piece Forged Steel TRUNNION BALL VALVE
Bolted Three Piece Forged Steel TRUNNION BA VAV Trunnion Valve Features: Forged -piece construction Fire safe design ouble block and bleed design C.S. trim with mil NC ISO mounting pads Sealant injection
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
More informationProcess Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
More informationPressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
More information87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
More informationDuplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
More informationWorld Class Bellows Seal Valves
World Class Bellows Seal Valves Fugitive Emissions Sealing High Cycle Bellows In-Line Servicing High Flow Capacity Conval Bellows Seal Valves meet all of the rigorous requirements of MSS SP-117, ensuring
More informationKTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
More informationMETAL SEATED GATE VALVE
BEI JI NG JOI NTFLOW SYSTEM CO. Gat eval ve FEATURE Solid wedge gate valves are the perfect solution as a closing device in pipeline systems. Because of the straight bore all impurities can pass through
More informationPage 1 Worldwide Re R v e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class
More informationTable of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Name Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the control of pressure,
More informationBolted Two Piece Carbon Steel and Stainless Steel FLOATING BALL VALVE
Bolted Two Piece Carbon Steel and Stainless Steel FOATING BA VAVE Floating Valve Features: Bolted -Piece Construction Cast Steel 50 & 00 Forged Steel 00 to 500 Fire safe SS trim/cs ENP All valves NACE
More informationCarbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion
More informationFisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationCORROSION RESISTANT. Gate Globe Check. to mark progress
CORROSION RESISTANT Gate Globe Check to mark progress STAINLESS STEEL ALLOY 20 DUPLEX MONEL HASTELLOY INCONEL LADISH VALVE COMPANY, LLC 7612 Bluff Point Drive, Houston, TX 77086 Phone: 1.866.523.4740 or
More informationORBIT Valves STANDARD FEATURES
ORBIT Valves STANDARD FEATURES Cameron s ORBIT valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve
More informationLead Free LEAD FREE VALVES A H E AD OF TH E F L O W CATALOG C-LFV nibcoleadfree.com. *Weighted average lead content 0.25%
Lead Free LEAD FREE VALVES * A H E AD OF TH E F L O W nibcoleadfree.com CATALOG C-LFV-0416 THE LEAD FREE AUTHORITY AUTHORITY FREE LEAD THE WROT COPPER & CAST PERFORMANCE BRONZE Sweat and thread Size range:
More informationMaterials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationMDV SERIES 3 WAY BALL VALVES
MDV SERIES 3 WAY BALL VALVES Diverting ball valves for industrial and process applications. Design Pressure Rating 150# to 1500# Available in Sizes ½ to 12 2500# Available in Sizes ½ to 4 Valve Size 1/2
More informationFLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
More information1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
More informationAmerican Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
More informationCAST IRON NON-RETURN VALVE SWING TYPE (Reflux Valve)
about us With the "COMMITMENT TO EXCELLENCE" drive, NVR is becoming a foremost name in bronze, brass, cast iron, cast seel and forged steel valves for domestic and industrial applications. Having the most
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Ball Valves Our Trunnion Ball Valve is designed for use in gas applications. This full bore, through conduit valve utilizes a 3 piece, forged steel body, trunnion supported
More informationSpecification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
More informationCarbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
More informationALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
More informationP R O C E S S V A L V E S. ORBIT Technical Reference Data for Valves and Actuators ORBIT
Technical Reference Data for Valves and Actuators TABLE OF CONTENTS TECHNICAL REFERENCE DATA FOR VALVES AND ACTUATORS Standard Features 2 Ordering Information 3 The Principal 4 One Piece Stem, Enclosed
More informationJAG flocomponents n.a. JAG floater features: ...there is always a better way.
JAG flocomponents n.a....there is always a better way. T CANG: The JAG partnership is underpinned by nearly 75 years of flow control experience in the Western Canada basin. The shared vision that lead
More informationSAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationAnderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
More informationTable of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
More informationPOWER-SEAL. Manual and Automated High Performance Butterfly Valves. ANSI/ASME Class 150 and 300. Actuators and Accessories
POWER-SEAL Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300 Featuring Actuators and Accessories TABLE OF CONTENTS POWER-SEAL Manual and Automated High Performance Butterfly
More informationSV SERIES 2-PIECE V PORT CONTROL VALVES
SV SERIES 2-PIECE V PORT CONTROL VALVES Split Body metal seated control valves for industrial and process applications. Design Pressure Rating 150# Available in Sizes ½ to 12 300# Available in Sizes ½
More informationFORGED STEEL VALVES. 150# # Gate Globe Check. 4Evergreen Valve
FORGED STEE VAVES 150# - 2500# Gate Globe Check 4Evergreen Valve 4E is a Texas corporation valve company which was founded in 1993 by a group of enthusiastic people with more than 20 years of serving in
More informationAMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
More informationKTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERA APPICATION Clean fluids, dirty
More informationOperation Manual for Metal Sealing Butterfly Valve
DOC NO.: HT/CE.DJ75 REV NO.: 2006 Operation Manual for Metal Sealing Butterfly Valve HT343SH-16C DN80 ~ 600 HT373SH-16C DN80 ~ 600 Controlled Version No Non-Controlled Version Prepared by Reviewed by Approved
More informationModel 360 Control Valves
Features Sour Service Capability Available in standard configurations that comply with NACE MR0175/ISO 15156. Versatility A wide range of trim options including Low Noise and Anti- Cavitation make the
More informationMasoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationMDV SERIES THREE WAY BALL VALVES
MDV SERIES THREE WAY BALL VALVES 1/2 THRU 12 ANSI 150# THRU ANSI 2500# FULL PORT AND REDUCED PORT BLOW OUT PROOF STEM METAL AND SOFT SEATS The Jarecki MDV Series ball valves are available in a variety
More informationAMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
More informationExperience since Bellows Sealed Globe Valve Model protected bellows design
Bellows Sealed Globe Valve Model 350 - protected bellows design Successful Concept The industrial success of PHOENIX bellows sealed globe valves in critical service applications is based on: Over 40 years
More informationMECHANICAL LEVEL CONTROLS
FLANGED TRUNNION ASSEMBLY DUCTILE IRON APPLICATIONS: Used on oil and gas separators, freewater knockouts (FWKO), horizontal emulsion treaters and similar equipment where a float is desired to monitor fluid
More informationSEMPELL. High Pressure Steam Bypass Valves - Type 115 ASME.
SEMPELL Steam Turbine and Boiler protection at Steam Turbine trip. Steam Turbine bypass to Cold Reheat or Condenser while Boiler/Turbine start-up and shut-down. Features and Benefits Pressure reduction
More informationM21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSaidi Spain BALL VALVES. Product Catalogue. English version. for the process industry
Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES
More informationMaterials Materials Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown.
19000 Materials Materials 15 6 9 10 14 7 8 5 7 3 2 4 1 19000-2 Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown. 19000.5 19000 (SRV-1/Q3.01) 19000
More information