Tantalum Through-Hole Capacitors Radial Dipped T350, T351, T352, T353, T354, T355 and T356 Series UltraDip II Polar

Transcription

1 T350, T351, T352, T353, T354, T355 and T356 Series UltraDip II Polar Overview The KEMET UltraDip II Series offers quality instrument and entertainment system designers the widely recognized advantages inherent in solid tantalum capacitors at competitive prices. These capacitors are miniature, dipped, solid tantalum capacitors that provide the designer with the advantages of compactness, low leakage and low DF performance characteristics for filtering, bypassing, coupling, blocking and RC timing circuits. This series features a capacitance range from 0.1 μf to 680 μf at voltages from 3 VDC to 50 VDC. UltraDip II capacitors utilize the same sophisticated materials and processes which have positioned KEMET as the leading manufacturer of solid tantalum capacitors. The plastic case provides a tough barrier coating and maintains precision of lead wire spacing within ±0.015 inch.the gold color epoxy utilized permits laser marking with outstanding permanency and legibility. All case sizes are printed with capacitance, voltage, polarity and vendor identification. Solid tantalum devices exhibit no degradation failure mode during shelf storage and show a constantly decreasing failure rate (i.e., absence of wearout mechanism) during life tests. Selfinsulating cases are resistant to shock and vibration. This series also exhibits low DC leakage, ESR and impedance, and maintains excellent temperature stability." Benefits Taped and reeled per EIA Specification RS-468 Laser-marked case Capacitance values of 0.1 μf to 680 μf Tolerances of ± 5% (special order), ±10% and ±20% Voltage rating of 3 VDC 50 VDC Case sizes: A, B, C, D, E, F, G, H, J, K, L, M Applications Typical applications include filtering, bypassing, coupling, blocking and RC timing circuits or other applications that can benefit from compactness. Ordering Information T 35X A 105 M 035 A S Capacitor Class T = Tantalum Series Case Size A, B, C, D, E, F, G, H, J, K, L, M Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros to follow. Capacitance Tolerance M = ±20% K = ±10% J = ±5% (Available on special order) Rated Voltage (VDC) 003 = = = = = = = = 50 Failure Rate Termination Finish Packaging Not Applicable S = Standard T =100% Sn (tin) 7301 & 7303 = Tape & Reel 7305 & 7317 = Ammo One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 1

2 Performance Characteristics Item Operating Temperature 55 C to 125 C Performance Characteristics Rated Capacitance Range μf at 120 Hz/25 C Capacitance Tolerance M Tolerance ±20%, K Tolerance ±10% Rated Voltage Range DF (120Hz at 25 C) ESR and Impedance (100 khz at 25 C) Leakage Current 3V 50V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table (for reference only) Refer to Part Number Electrical Specification Table (at rated voltage up to +85 C and 2/3 of rated voltage applied at 125 C) Qualification Certification Electrical Characteristics Graphs KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 2

3 Dimensions Millimeters (Inches) Case Size All T350 T351 T352 T353 T354 T355 T356 D Max Diamenter A (4.5) (7.1) (9.6) (10.2) (10.2) (8.6) (8.6) (8.6) B (4.5) (7/6) (9.9) (10.4) (10.4) (8.9) (8.9) (8.9) C (5.0) (8.4) (10.7) (11.2) (11.2) (9.6) (9.6) (9.6) D (5.0) (8.6) (10.7) (11.4) (11.4) (9.9) (9.9) (9.9) E (5.5) (8.9) (11.2) (11.7) ( (10.2) (10.2) (10.2) F (6.0) (9.9) (12.2) (12.7) (12.7) (11.2) (11.2) (11.2) G (6.3) (10.2) (12.4) (13.0) (13.0) (11.4) (11.4) (11.4) H (7.6) (10.2) (12.7) (13.2) (13.2) (11.9) (11.9) (11.9) J** (8.4) (12.7) *** *** (14.7) (14.0) *** (14.0) K** (8.9) (13.5) *** *** (16.0) (15.5) *** (15.5) L** (8.9) (16.0) *** *** (18.5) (18.1) *** (18.1) M** (10.2) (17.0) *** *** (19.3) (18.8) *** (18.8) *All "H" Dimensions are from Capacitor seating plane to top of Capacitor. **On T350 Series, case sizes A-H are supplied with.100"(2.54) lead spacing - case sizes J-M are supplied with.200"(5.08) lead spacing. ***These case sizes are not available for T351, T352 and T355 capacitors. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 3

4 Table 1 - Ratings and Part Number Reference (1) To complete KEMET Part Number, insert Series Designation as follows: "0 = T350, "1" = T351, "2" = T352, "3" = T353, "4" = T354, "5" = T355, "6" = T356. (2) To complete KEMET Part Number, insert only Series Designation as follows: "0 = T350, "3" = T353, "4" = T354, "6" = T356. (3) To complete KEMET part number, insert M - 20%, K - ±10%. Designates Capacitance tolerance. (4) To complete KEMET part number, insert S = Standard coated or T=100% Sn (tin). Designates termination finish. Higher voltage and better capacitance tolerance products may be substitued for an order within the same case size at KEMET's option. Recommended Voltage Derating Guidelines Ripple Current/Ripple Voltage Reverse Voltage Table 2 - Land Dimensions/Courtyard KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 4

5 Optimum Solder Wave Profile Mounting All encased capacitors will pass the Resistance to Soldering Heat Test of MIL STD 202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 5

6 Construction Capacitor Marking Storage & Handling Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification RS-296. Figure 1 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 6

7 Figure 2 Figure 3 12" (30.48cm) * 0.059" to 0.315" Greater Than Component Length White (+) (Anode) Blue ( ) (Cathode) Hub 0.047" Maximum (1.20) 0.655" ±0.010 Hole (15.9 ±0.25) 3 1 / 4 " (82.6) 1 /8 " (3.18) See Table 3 "B" * See Table 3 "A" 0.250" Nominal (6.35) Table 1 Dimensions in Inches (Millimeters) BODY DIAMETER A PITCH +/ (0.5) B INSIDE TAPE SPACING (5.0) (5.0) (5.0) to (10.0) or (10.0) (52.4) , (+2.0, 1.0) (73) +/ Capacitors are reeled so that positive leads are oriented as shown in Figure 3. Kraft paper (50lb. test minimum) is inserted between the layers of capacitors wound on reels for component pitch 0.200" sizes and corrugated paper (70 lb. test minimum), single faced is inserted for component pitch 0.400" sizes. Capacitor lead length may extend only a maximum of.031" (0.8 mm) beyond the tape s edges. Capacitors are centered in a row between the two tapes and will deviate only ±0.031" (0.79 mm) from the row center. Figures 1 and 2 show the KEMET standard chipboard tape reel. A minimum of 36" (91.5 cm) leader tape is provided at each end of the reeled capacitors. Universal splicing clips are used to connect the tape. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 7

8 Table 2 Packaging Quantity Case Size Standard Bulk Standard Reel Ammo Pack Reel C-Spec Quantity Quantity Quantity A B C D E C-7301/7303 F G H J K L, M Pending 500 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 8

9 KEMET Corporation World Headquarters 2835 KEMET Way Simpsonville, SC Mailing Address: P.O. Box 5928 Greenville, SC Tel: Fax: Corporate Offices Fort Lauderdale, FL Tel: North America Northeast Wilmington, MA Tel: Southeast Lake Mary, FL Tel: Central Novi, MI Tel: Irving, TX Tel: West Milpitas, CA Tel: Mexico Guadalajara, Jalisco Tel: Europe Southern Europe Sasso Marconi, Italy Tel: Skopje, Macedonia Tel: Central Europe Landsberg, Germany Tel: Kamen, Germany Tel: Northern Europe Wyboston, United Kingdom Tel: Espoo, Finland Tel: Asia Northeast Asia Hong Kong Tel: Shenzhen, China Tel: Beijing, China Tel: Shanghai, China Tel: Seoul, South Korea Tel: Taipei, Taiwan Tel: Southeast Asia Singapore Tel: Penang, Malaysia Tel: Bangalore, India Tel: Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/2016 9

10 Disclaimer All product specifications, statements, information and data (collectively, the Information ) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation s ( KEMET ) knowledge of typical operating conditions for such applications, but are not intended to constitute and KEMET specifically disclaims any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) T2043_T35X 6/24/