1 IPM MATERIALS GROUP
|
|
|
- Brianne Black
- 6 years ago
- Views:
Transcription
1 1 IPM MATERIALS GROUP
2 2 The Materials Research Group at IPM Professors Afrooz Barnoush, Hydrogen Embrittlelment, Nano Technology Andreas Echtermeyer, Polymers and Composites Nuria Espallargas, Tribology and Surface Engineering Roy Johnsen, Corrosion and Surface Engineering Nils Petter Vedvik, Polymers and Composites Alexei Vinogradov, Fracture/Fatigue Astrid S. de Wijn, Tribology, Tribology Adjunct Professors (Prof. II) Odd Magne Akselsen, Joining of metals Ole Øystein Knudsen, Surface Protection Mariano Iannuzzi, Corrosion Students 2016 PhD candidates: Post Docs MSc students: about 30 Reserach Budget About 35 MNOK per year
3 3 Applying Materials under Harsh Conditions RENEWABLES OIL & GAS MARINE/SHIPPING FISH FARMING Damage and degradation mechanisms Develop smart solutions for controlling and preventing damage Design and Produce Materials and Components
4 4 IPM OFFSHORE MATERIALS MATERIALS GROUP IPM Materials Group Key Research Areas Composites and Polymers Andreas Echtermeyer Nils Petter Vedvik Corrosion Protection & Hydrogen Embrittlement Afrooz Barnoush Roy Johnsen Fracture Prediction Alexei Vinogradov Nanomechanical Modeling and testing Afrooz Barnoush Tribology and Surface Engineering Nuria Espallargas Astrid de Wijn Roy Johnsen
5 5 COMPOSITES AND POLYMERS Design and Fabricate for Long Term Performance Design FEA: Fatigue, Impact, Joints, Buckling Production: VARTM, SQRTM, Filament Winding, Extrusion Long Term Properties: cyclic-static fatigue, multi scale modeling Joints: mechanical, adhesive, metal-composite NDT: embedded optical fibers, digital imaging, thermography Buoyancy-Insulation: Foams and filled polymers 5-7 PhD students, 5-12 MS students Professor Andreas Echtermeyer Ass.Prof. Nils Petter Vedvik
6 6 CORROSION, CORROSION PROTECTION & HYDROGEN EMBRITTLEMENT CORROSION/CORROSION PROTECTION Corrosion properties of stainless steels in seawater and CO 2 /H 2 S environments Paint systems for demanding conditions Thermal spray coatings for wear and/or corrosion protection HYDROGEN EMBRITTLEMENT Hydrogen Induced Stress Cracking of carbon steel, stainless steels, Ni-alloys and aluminium Sulfide Stress Corrosion (SSC) cracking of carbon steels and stainless steels 25% Cr duplex with crack Professor Roy Johnsen roy.johnsen@ntnu.no Professor Afrooz Barnoush afrooz.barnoush@ntnu.no
7 7 FRACTURE PREDICTION New life = new materials=new microstructure= new characterization => new understanding => safety High strength ultrafine grained materials Fundamental mechanisms of hardening, fatigue and fracture Light metals for green transport Bio-degradable materials In situ damage characterization Acoustic emission Modelling 5ms Professor Alexei Vinogradov alexeivinogradov@ntnu.no
8 8 NANOMECHANICAL MODELLING AND TESTING Understanding the correlation between properties and microstructure Nano/Micro scale mechanical testing High resolution characterization Advanced modelling and simulation Professor Afrooz Barnoush-
9 9 TRIBOLOGY AND SURFACE ENGINEERING Tribocorrosion mechanisms of passive metals and coatings. Multidegradation: tribologycorrosion-fatigue. New coatings and materials for wear and friction. Lubrication mechanisms of hydraulic systems. Modelling of friction and lubrication. Nanoscale transport theory. Complex fluids. Professor Nuria Espallargas Professor Roy Johnsen Ass. Prof. Astrid de Wijn
10 10 CONCLUSIONS A lively group Well connected with Norwegian Industry Well established academically Good international connections Alumni find good jobs Solved engineering challenges for industry and society Many challenging new projects and tasks to solve
Dept. for Corrosion and Tribology
Oil and Gas Process Technology Dept. for Corrosion and Tribology Dr. Daniel Bengtsson Blucher Director, Head of Dept. Dr. Daniel Bengtsson Blucher Director / Head of Department for Corrosion and Tribology
Material development for emerging energy technologies
Material development for emerging energy technologies Need and Approach Need Sustainable power generation is needed for the mitigation of global warming caused by greenhouse gas emissions. Advanced materials
Surface engineering for new industrial applications - bio application
Surface engineering for new industrial applications - bio application Dr. Yangchun Dong Bsc. Msc. PhD Tel.: +420541143323 Mobile: +420776395588 30/10/2013, Brno Introduction 1. A few questions to answer:
INSTRUCTION PROFESSOR K. KOMVOPOULOS. Mechanical Behavior of Engineering Materials (ME 108) (Undergraduate course, junior/senior level)
INSTRUCTION PROFESSOR K. KOMVOPOULOS. Mechanical Behavior of Engineering Materials (ME 108) (Undergraduate course, junior/senior level) Part I Microstructure and Deformation of Materials Alloying and Hardening
Nano and functional material solutions for applications in energy sector
Nano and functional material solutions for applications in energy sector 29 November 2011 Dr. Pertti Kauranen VTT Technical Research Centre of Finland 2 Presentation outline 1. Materials and future energy
Nanotechnology in aerospace applications
Nanotechnology in aerospace applications current research at NLR A.M. Vollebregt, department manager Gas Turbines & Structural Integrity Nationaal Lucht- en Ruimtevaartlaboratorium National Aerospace Laboratory
Enhanced Response from Engineered Nano Treated Peizofilm
Enhanced Response from Engineered Nano Treated Peizofilm By Sai Narayan Sundar Advisor Dr J.P Sharma Dept. of Mechanical Engineering University of Mississippi i: flow of current due to piezo deformation
Marine Corrosion and its Prevention in Small Vessels
Marine Corrosion and its Prevention in Small Vessels Contents: i) Corrosion: Fundamental Principles ii) Forms of corrosion in marine metals iii) Corrosion above the waterline iv) Corrosion below the waterline
Expertise on following materials: Thanks to the structure of CSNMT, the expertise covers nearly all engineering materials.
NAME: CZECH SOCIETY FOR NEW MATERIALS AND TECHNOLOGIES (CSNMT), PRAHA COUNTRY: CZECH REPUBLIC Profile : The Czech Society for New Materials and Technologies (CSNMT), founded in 1993, is a voluntary association
Influence of stress concentrator on hydrogen embrittlement susceptibility of a X70 weld simulated coarse grained heat affected zone
EUROMAT 2015 Warsaw, 2015 September 23 th Influence of stress concentrator on hydrogen embrittlement susceptibility of a X70 weld simulated coarse grained heat affected zone A. Alvaro *, V. Olden *, B.
CONTENTS. Preface to the 3rd Edition Acknowledgments
CONTENTS Preface to the 3rd Edition Acknowledgments vii ix CHAPTER 1 INTRODUCTION 1 1.1 Definition of materials degradation 1 1.2 Definition and significance of surface engineering 4 1.3 Classification
Advanced Materials Technology Key Expertise Theme. astutewales.com
Advanced Materials Technology Key Expertise Theme astutewales.com Understanding the Behaviour of Materials. Materials used to manufacture components is a key area for ensuring efficient production and
PHS6317 NANO-ENGINEERING OF THIN FILMS
PHS6317 NANO-ENGINEERING OF THIN FILMS Ludvik Martinu, ing., PhD Professor Chairholder: NSERC Multisectorial Industrial Research Chair in Coatings and Surface Engineering ludvik.martinu@polymtl.ca www.polymtl.ca/larfis
Applied Materials. The Power of Trust. The Future of Energy.
Applied The Power of Trust. The Future of Energy. Applied EXTENDING EQUIPMENT LIFE Fluorescent magnetic particle inspection Assessment of fracture features by scanning electron microscopy Failure analysis,
Materials Engineering Sessions focus on the areas of properties, selection, processing and performance of materials.
Materials and Lightweighting Track Materials Engineering Sessions focus on the areas of properties, selection, processing and performance of materials. M102 Advances in Lightweight Materials This session
Hydrogen compatibility of austenitic stainless steel tubing and orbital welds. Chris San Marchi Sandia National Laboratories, Livermore CA and
Hydrogen compatibility of austenitic stainless steel tubing and orbital welds Chris San Marchi Sandia National Laboratories, Livermore CA and L.A. Hughes, B.P. Somerday, and D.K. Balch SNL/CA SAND2013-7290C
A perspective on environmentally-induced cracking
Engineering Conferences International ECI Digital Archives International Workshop on the Environmental Damage in Structural Materials Under Static Load/ Cyclic Loads at Ambient Temperatures Proceedings
NOWITECH final event August 2017 Coatings for Wind Turbines
NOWITECH final event 22-23 August 2017 Coatings for Wind Turbines Astrid Bjørgu, Senior Adviser SINTEF Materials and Chemistry Astrid.bjorgum@sintef.no Challenges for offshore wind farms Harsh environmental
Environmental durability of corrosion sensitive aluminum alloys: one more step toward a more reliable laboratory evaluation of in service performance
Powering your H2FC innovation Environmental durability of corrosion sensitive aluminum alloys: one more step toward a more reliable laboratory evaluation of in service performance Dr. Danick Gallant Ph.D.,
STRUCTURING A PROBABILISTIC MODEL FOR RELIABILITY EVALUATION OF PIPING SUBJECT TO CORROSION-FATIGUE DEGRADATION
STRUCTURING A PROBABILISTIC MODEL FOR RELIABILITY EVALUATION OF PIPING SUBJECT TO CORROSION-FATIGUE DEGRADATION Professor Mohammad Modarres Center for Risk and Reliability Department of Mechanical Engineering
HISC Performance Validation of DSS Welds for Large-Strain, HP/HT Subsea Applications
HISC Performance Validation of DSS Welds for Large-Strain, HP/HT Subsea Applications Requirements for an Improved Assessment Approach Alexander Amadioha & Andrew Low AOG 2015 Conference, Perth, Australia,
Plasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
Table Minimum Yield Strengths of Cu-14Ni-3Al and T3
Analysis of ToughMet 3 and Cu-14Ni-3Al ToughMet 3 and Cu-14Ni-3Al are both high strength copper alloys commonly used in the marine and oil and gas industries, but significant differences are realized when
Machine and Vehicle Design: Master Thesis presentation
Politecnico di Milano since 1863 Machine and Vehicle Design: Master Thesis presentation (June 2014) POLITECNICO DI MILANO, ITALY DIPARTIMENTO DI MECCANICA Hydrogen embrittlement TITLE: Numerical simulation
Intergranular Corrosion (IGC)
Intergranular Corrosion (IGC) Microstructure of metals and alloys is made up of grains (separated by grain boundaries) Intergranular corrosion is a localized attack along the grain boundaries, or immediately
Premature bearing failures in wind turbine gear units
Premature bearing failures in wind turbine gear units Drivers and counter measures SKF Wind Farm Management Conference, 2016 David Vaes April 18 th, 2016 Critical bearing positions Early cracks have occurred
HYBRID MOULDS - THERMAL ASPECTS
DEPARTMENT OF MATERIALS, TEXTILES AND CHEMICAL ENGINEERING HYBRID MOULDS - THERMAL ASPECTS Prof. Ludwig Cardon 2017 October DEPARTMENT OF MATERIALS, TEXTILES AND CHEMICAL ENGINEERING POLYMER, FIBER AND
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
Kinetic Metallization Repair of IVD Aluminum. Military Applications - Session 1 24 May, 2012 Ralph Tapphorn, H. Gabel, K. Hashimoto, and T.
Kinetic Metallization Repair of IVD Aluminum Military Applications - Session 1 24 May, 2012 Ralph Tapphorn, H. Gabel, K. Hashimoto, and T. Crowe Overview Aerospace Repair Applications Kinetic Metallization
Joining of Dissimilar Automotive Materials
Joining of Dissimilar Automotive Materials P.K. Mallick William E. Stirton Professor of Mechanical Engineering Director, Center for Lighweighting Automotive Materials and Processing University of Michigan-Dearborn
Aircraft Structural Integrity
Unit 89: Aircraft Structural Integrity Unit code: J/6017248 QCF level: 5 Credit value: 15 Aim This unit aims to develop the understanding and techniques necessary to ensure that aircraft are manufactured
Table Minimum Yield Strengths of Cu-14Ni-3Al and T3
Analysis of ToughMet 3 and Cu-4Ni-3Al ToughMet 3 and Cu-4Ni-3Al are both high strength copper alloys commonly used in the marine and oil and gas industries, but significant differences are realized when
Engineering. Composiies. CRC Press. Taylor & Francis Croup. Boca Raton London New York. CRC Press is an imprint of the
Engineering Design with Polymers and Composiies Second Edition lames G. Gerdeen, PhD, PE Ronald A. L. Rorrer, PhD, PE CRC Press Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint
NSK Premium Technology For Wind
NSK Premium Technology For Wind Unless otherwise specifically noted, the competitive information contained in this presentation is gathered from legally permissible sources, including, but not limited
Aluminum Alloys For Packaging: Proceedings Of The Symposium Presented At The 1998 Tms Annual Meeting In Ss READ ONLINE
Aluminum Alloys For Packaging: Proceedings Of The Symposium Presented At The 1998 Tms Annual Meeting In Ss READ ONLINE system and its application to solidification simulation. Al alloys are widely used
Effect of Si-C on MMC of Al-Zn Alloy
Effect of Si-C on MMC of Al-Zn Alloy Bothe Sanket B. 1,Shinde Swapnil V. 2,Shinde Gokul J. 3, Vinchu Pravin K. 4, Asst. Prof. Ghodake A. P. 5 Asst.Prof. Darade P.P. 6 1,2,3,4BE Student, Department of Mechanical
Think Simulation! Adventures in Electrolytes. Corrosion Simulation. October 17, 2012
Think Simulation! Adventures in Electrolytes Corrosion Simulation October 17, 2012 OLI Simulation Conference 2012 Scope Review of corrosion simulation models Progress in modeling general corrosion: Cu-Ni
ALEKSANDRAS STULGINSKIS UNIVERSITY FACULTY OF AGRICULTURAL ENGINEERING. Institute of Power and Transport Machinery Engineering
ALEKSANDRAS STULGINSKIS UNIVERSITY FACULTY OF AGRICULTURAL ENGINEERING Institute of Power and Transport Machinery Engineering STUDY SUBJECT DESCRIPTION TRIBOTECHNICS Study cycle: BSc Number of ECTS credit
Typical aerospace-standard materials
JOHANN MAIER GmbH & Co. KG Schockenriedstraße 3 70565 Stuttgart-Vaihingen Typical aerospace-standard materials 1.4314.7 Stainless, austenitic steel 0,05C-1Cr-Ni X5 CrNi 1 1.4301 / AISI 304 60 * * Special
A REVIEW ON MECHANICAL PROPERTIES OF METALLIC MATERIALS AFTER LASER SHOCK PROCESSING
Bulletin of the Transilvania University of Braşov Series I: Engineering Sciences Vol. 4 (53) No. 2-2011 A REVIEW ON MECHANICAL PROPERTIES OF METALLIC MATERIALS AFTER LASER SHOCK PROCESSING I.B. ROMAN 1
MENG Mechanical Engineering
MENG Mechanical Engineering 1 MENG Mechanical Engineering MENG 1310 Manufacturing Processes Lab 1 Credit Hour. 0 Lecture Hours. 2 Lab Hours. This course covers hands on introduction to various manufacturing,
Available online at Fatigue Fatigue in AISI 4340 steel thermal spray coating by HVOF for aeronautic application
Available online at www.sciencedirect.com Procedia Procedia Engineering Engineering 2 (2010) 00 (2009) 1617 1623 000 000 Procedia Engineering www.elsevier.com/locate/procedia Fatigue 2010 Fatigue in AISI
Effect of Ageing on the Tribological Behavior of Inconel 690 Using Taguchi s Method
American Journal of Materials Science 2016, 6(4A): 25-30 DOI: 10.5923/c.materials.201601.05 Effect of Ageing on the Tribological Behavior of Inconel 690 Using Taguchi s Method Joel Immanuel Concessao 1,*,
TRIBOLOGICAL PROPERTIES OF COMPOSITE MATERIALS
TRIBOLOGICAL PROPERTIES OF COMPOSITE MATERIALS Assoc. Prof. Minodora PASĂRE, Ph.D. Cătălina IANĂŞI Constantin Brancusi University of Tg-Jiu, Romania minodora_pasare@yahoo.com, ianasi_c@yahoo.com Abstract:
Laboratory of Applied Mechanics and Reliability: Research Activities
Laboratory of Applied Mechanics and Reliability: Research Activities Experimental mechanics Static, cyclic & fatigue testing, uniaxial / biaxial test, climatic chamber (- 10 C to 250 C). Vibration testing
TRIBOCORROSION EVALUATION OF PROTECTIVE COATING
TRIBOCORROSION EVALUATION OF PROTECTIVE COATING Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2014
INEGI Science & Innovation in Mechanical and Industrial Engineering
AUTOMOBILE AND TRANSPORT AERONAUTICS, SPACE AND DEFENCE HEALTH INEGI Science & Innovation in Mechanical and Industrial Engineering SEA ECONOMY ENERGY www.inegi.pt inegi@inegi.up.pt EQUIPMENT AND DURABLE
Integration of Modeling, Theory and Experiments for Fusion Reactor Materials
Integration of Modeling, Theory and Experiments for Fusion Reactor Materials Roger E. Stoller Oak Ridge National Laboratory ReNew: Harnessing Fusion Power Workshop Los Angeles, CA March 2-4, 2009 Role
NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL, WARANGAL , TELANGANA STATE, INDIA
NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL, WARANGAL 506 004, TELANGANA STATE, INDIA ANNEXURE-II SPECIALIZATIONS FOR FACULTY RECRUITMENT (Advt.No.Admin.02/2018) ASSISTANT PROFESSOR (GRADE-I & GRADE-II)/ASSOCIATE
CEM - Science and Engineering of Materials
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 712 - EM - Department of Mechanical Engineering Academic year: Degree: 2017 BACHELOR'S
WEIGHT LOSS FUNCTIONS FOR TOLERABLE WEAR RATE OF AA1100/BN METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 5, September October 2016, pp.09 17, Article ID: IJMET_07_05_002 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=5
NCERCAMP at the University of Akron. Major Equipment
Tescan LYRA-3 Model XMU FIB-FESEM Scanning Electron Microscope (SEM) with Focused Ion Beam (FIB) capability and a Transmission Electron Microscope (STEM) detector. The FIB can perform cross sectioning
The Influence of Titanium Properties on the Design and Application of Downhole Oil & Gas Equipment. Mitchell Dziekonski Titanium Engineers, Inc.
The Influence of Titanium Properties on the Design and Application of Downhole Oil & Gas Equipment Mitchell Dziekonski Titanium Engineers, Inc. Joel Ogburn Titanium Engineers, Inc. Titanium alloys have
CP DESIGN OF A SUPER 13% CR FLOWLINE. Are Sjaastad and Harald Osvoll FORCE Technology Norway AS Hornebergveien Trondheim Norway
CP DESIGN OF A SUPER 13% CR FLOWLINE Are Sjaastad and Harald Osvoll FORCE Technology Norway AS Hornebergveien 7 7038 Trondheim Norway Olav Jan Hauge and Rolf E. Lye Norsk Hydro ASA Norway Guy Bärs Technip
Ultimate Surface Performance HYDRAULIC & PNEUMATIC CYLINDERS & RODS
www.hefusa.net sales@hefusa.net A Subsidiary of HEF Group Ultimate Surface Performance HYDRAULIC & PNEUMATIC CYLINDERS & RODS HEF Group is the only global supplier of both Liquid Nitriding treatments and
STAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels
These steels contain a high percentage of chromium and sometimes other alloys and have been designed to prevent different types of corrosion. There are two kinds of corrosion: dry corrosion (often named
Industrial Grade Products Range from Reinste Nano Ventures Pvt. Ltd.
Industrial Grade Products Range from Reinste Nano Ventures Pvt. Ltd. Antibacterial & Antimicrobial Solutions for Various Industries Liquid Nanosilver & Nanosilver Intermediaries Liquid Nano Silver (Aqueous
Introduction to Materials Science & Engineering
Introduction to Materials Science & Engineering Course Objective... Introduce fundamental concepts in Materials Science You will learn about: material structure how structure dictates properties how processing
Fundación ITMA participates in numerous collaborative projects at regional, national and European level, coordinating some of them.
NAME : FUNDACIÓN ITMA INSTITUTION : FUNDACIÓN ITMA COUNTRY : SPAIN Profile: Fundación ITMA is a nonprofit and private foundation which aims to promote companies innovation through applied research and
Extending Valve Life: The Art of Heat Treating and Ceramic Coatings
Extending Valve Life: The Art of Heat Treating and Ceramic Coatings By Chris Johnson & Kevin Tackett Bodycote Presented at the Today s Valve Industry Today s industrial valve industry within the oil &
United Surface Technologies
United Surface Technologies Engineered Coating Solutions Established 1986 www.ust.com.au Introduction United Surface Technologies (UST) Pty Ltd is an ISO 9001:2008 certified surface engineering company
Enabling safe and reliable offshore LNG transfer operations By Vincent Lagarrigue, Marketing & Project Manager within Trelleborg Industrial Solutions
Enabling safe and reliable offshore LNG transfer operations By Vincent Lagarrigue, Marketing & Project Manager within Trelleborg Industrial Solutions Executive Summary Moving liquefied natural gas (LNG)
Evaluation of Microstructure, Mechanical and Wear Properties of Aluminium Reinforced with Boron Carbide Nano Composite
Indian Journal of Science and Technology, Vol 9(20), DOI: 10.17485/ijst/2016/v9i20/84294, May 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Evaluation of Microstructure, Mechanical and Wear Properties
R & D of the Fabrication Technology for ITER Magnet Supports
ITR/P1-45 R & D of the Fabrication Technology for ITER Magnet Supports 1 P. Y. Lee*, 1 C.J.Pan, 1. L. Hou, 1 S.L.Han, 1 Z.C.Sun, 1 X. R. Duan, 1 Y. Liu, 2 F. Savary, 2 Y. K. Fu and 2 R. Gallix, 2 N. Mitchell
Comparison of the Effects of Surface Roughness of Wrought Aluminium Alloys on the Surface of Steel
Comparison of the Effects of Surface Roughness of Wrought Aluminium Alloys on the Surface of Steel Riyadh A Badr* School of Engineering, University of Samarra, Samarrah, 34010 - Salah Ad Din, Iraq Research
Cranfield University. Evaluation of Aluminium Based Coatings for Cadmium Replacement
Cranfield University George Chalaftris Evaluation of Aluminium Based Coatings for Cadmium Replacement School of Industrial and Manufacturing Science PhD Thesis CRANFIELD UNIVERSITY School of Industrial
INTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
Cold Spray Activities in Canada
Cold Spray Activities in Canada André G. McDonald, University of Alberta Bertrand Jodoin, University of Ottawa Stephen Yue, Richard Chromik, and Jun Song, McGill University Julio Villafuerte, SST Centerline,
Overview of Primary Systems Corrosion Research (PSCR)
Overview of Primary Systems Corrosion Research (PSCR) Robin Dyle, EPRI Jim Cirilli, Exelon NRC Industry Meeting June 2, 2015; Washington DC Outlines 2014 R&D Results 2015 R&D 2 2014 Deliverables Available
Departments and Specializations
Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural
ADVANCES in NATURAL and APPLIED SCIENCES
ADVANCES in NATURAL and APPLIED SCIENCES ISSN: 1995-0772 Published BYAENSI Publication EISSN: 1998-1090 http://www.aensiweb.com/anas 2017 April 11(4): pages 551-556 Open Access Journal Study And Analysis
Degradation and Surface Engineering SI MODULE CODE S CREDITS 10 LEVEL 6. Tutor-led Tutordirected
MODULE DESCRIPTOR TITLE Degradation and Surface Engineering SI MODULE CODE 16-6289-00S CREDITS 10 LEVEL 6 JACS CODE H100 SUBJECT GROUP Materials Engineering DEPARTMET Engineering & Mathematics MODULE LEADER
Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the
Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the Current Materials Accomplishments till date As the structural
Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211
Properties Alloy Steel Music Wire ASTM A228 UNS K08500 & G10860 Cold drawn. Constant tensile strength. Highquality and good for high cycle spring 250 F 449/230 (E) 30 (G).012 to.250 High Carbon Steel Wire/Bar
Prevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
Advanced Materials & Structures (AMS)
Competences Advanced Materials & Structures (AMS) Main axes of research Material design: Innovative materials Custom made materials (surface or bulk treatment) Improvement of material performance via bulk
Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
Encyclopedia of Aluminum and Its Alloys
Encyclopedia of Aluminum and Its Alloys Aerospace Fasteners: Use in Structural Applications --Manuscript Draft-- Manuscript Number: Full Title: EAIA-1032 Aerospace Fasteners: Use in Structural Applications
MICROSTRUCTURE CHARACTERIZATION OF LASER-CLAD NICKEL ALUMINUM BRONZE ALLOYS USING TRANSMISSION ELECTRON MICROSCOPY By J.C. Bennett READ ONLINE
MICROSTRUCTURE CHARACTERIZATION OF LASER-CLAD NICKEL ALUMINUM BRONZE ALLOYS USING TRANSMISSION ELECTRON MICROSCOPY By J.C. Bennett READ ONLINE water wall tube by laser cladding technology in the present
Specification ZINC-NICKEL COATINGS WITH PASSIVATION JED ON FERROUS MATERIAL Passivation, Zn-Ni-steel
Specification 2015-11 Class: Surface protection Class No.:50 ZINC-NICKEL COATINGS WITH PASSIVATION JED ON FERROUS MATERIAL 739 Previous Edition Part name (for databases) 2014-03 Passivation, Zn-Ni-steel
PART I PERFORMANCE OF MATERIALS IN SERVICE. Materials and Process Selection for Engineering Design: Mahmoud Farag
PART I PERFORMANCE OF MATERIALS IN SERVICE 1 Performance of Materials in Service I Part I discusses the different types of failure and how to prevent, or at least delay, such failures by selecting appropriate
SURFACE TREATMENT TECHNOLOGIES
SURFACE TREATMENT TECHNOLOGIES Applied Nano Surfaces World s best partner for cost efficient friction & wear reduction ANS is a leading technology provider of low friction and anti-wear surface treatment
GCSM IN-SERVICE MATERIAL BEHAVIOUR GROUP. Image: UC3M photographic files
GCSM IN-SERVICE MATERIAL BEHAVIOUR GROUP Image: UC3M photographic files 2 The In-service Material Behaviour Group (GCSM), led by Professor Miguel Ángel Martínez and Professor Francisco Javier Velasco,
The right chain! Extreme Performance from Rexnord. RexAthletic. MODULE_03/GB/2014/12 // No liability accepted for misprints or errors!
Extreme Performance from Rexnord RexAthletic RexAthletic The right chain! Long maintenance & lubrication intervals, long service life with special coating of pins & bushes for outstanding tribological
Fundamentals of Machine Component Design
FOURTH E D I T I O N Fundamentals of Machine Component Design ROBERT C. JUVINALL Professor of Mechanical Engineering University of Michigan KURT M. MARSHEK Professor of Mechanical Engineering University
Solid Mechanics Research
Solid Mechanics Research Prof. N. Chandrashekar Prof. D. Cronin Prof. G. Glinka Prof. K. Inal Prof. H. Jahed Prof. HJ Kwon Prof. S. Lambert Prof. J. Medley Prof. A. Salehian Prof. P. Sullivan Prof. M.
FROM FAILURE TO SUCCESS: A METALLURGICAL STORY ON SUCKER ROD PUMP BARRELS
FROM FAILURE TO SUCCESS: A METALLURGICAL STORY ON SUCKER ROD PUMP BARRELS Pinar Karpuz-Pickell, Ph.D., Ricky Roderick Don-Nan Pump & Supply ABSTRACT Sucker rod pumping applications are the oldest and most
Tennessee State University College of Engineering and Technology Department of Mechanical Engineering
Tennessee State University College of Engineering and Technology Department of Mechanical Engineering The Impact of Modeling, Simulation, and Characterization of the Mechanical Properties of Nano-materials
Creep failure Strain-time curve Effect of temperature and applied stress Factors reducing creep rate High-temperature alloys
Fatigue and Creep of Materials Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Fatigue failure Laboratory fatigue test The S-N Ncurve Fractography of fractured surface Factors improving fatigue life
Page 1 of 5
Page 1 of 5 http://www.olympus-ims.com/en/conducting-steel-plate-surface-texture-topography-analysis-with-laser-scanning-digital-microscope/ Multimedia Application Notes Conducting Steel Plate Surface
MATERIAL SELECTION. ME 403 Engineering Design, Product Realization 1
MATERIAL SELECTION Bibliography: Budinski, K. G. and M. K. Budinski, Engineering Materials, Properties and Selection, Prentice-Hall, 8 th ed., 2005. Metals Handbook, Volume 20, Material Selection and Design,
Fundamental Materials Technologies for Supporting Highly-Reliable Power-Generation Plants
Hitachi Review Vol. 47 (1998), No. 5 225 Fundamental Materials Technologies for Supporting Highly-Reliable Power-Generation Plants Masateru Suwa Hideyo Kodama Takao Iwayanagi Abstract: Finding a best-mix
id(s): Courses taught:
Name: Designation: Professor Dr. H. Suresh Hebbar Atawale Qualification: Ph.D., (IIT Delhi, 1999), Tribology of Composite Materials M.E. (Indian Institute of Science, Bangalore, 1987 ), Machine Design
Thermal Durability and Abradability of Plasma Sprayed Al-Si-Polyimide Seal Coatings p. 85
Trends in Automotive Applications of Thermal Spray Technology in Japan p. 1 Production Plasma in the Automotive Industry: A European Viewpoint p. 7 The Effect of Microstructure on the Wear Behavior of
Design Code Development in EERA JPNM: work done and future needs
Design Code Development in EERA JPNM: work done and future needs MatISSE/JPNM workshop on cross-cutting issues in structural materials R&D for future energy systems 25-26 November 2015, Petten, NL K-F
Analysis and Experimental Investigation of Surface Modification in EN8 Steel by Using Thermal Spray Technique
Analysis and Experimental Investigation of Surface Modification in EN8 Steel by Using Thermal Spray Technique Manikandan.D [1], Thirumalvalavan.S [2] P.G Student, Department of Mechanical Engineering,
Welding Alloys Group. WA Applications. for Hydropower
Welding Alloys Group WA Applications for Hydropower Success through innovation This catalogue presents a range of high performance cored wires and electrodes dedicated to hydropower applications. We will
Influence of Ductility Ingredients of Structural Adhesives on Fracture Energy under Static Mixed-Mode Loading 1. Introduction
contents Introduction xi CHAPTER 1 Influence of Ductility Ingredients of Structural Adhesives on Fracture Energy under Static Mixed-Mode Loading 1 Introduction 2 Fracture Energy Values in Adhesives 2 Methods
Fraunhofer UMSICHT. Hochtemperaturanwendungen Herausforderungen für Beschichtungstechnologien
Fraunhofer UMSICHT Institutsteil Sulzbach-Rosenberg Sommersymposium am 27. Juni 2013 Hochtemperaturanwendungen Herausforderungen für Beschichtungstechnologien Dr. HDR Patrick J. Masset Agenda 1. Energy
Stress Corrosion Cracking
Stress Corrosion Cracking SCC is the brittle cracking of a metal due to the result of combined effects from localized corrosion and a tensile stress. Stress Corrosion Cracking Stress Corrosion Cracking