(informative) List of EN (European Norm) packaging machinery standards

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "(informative) List of EN (European Norm) packaging machinery standards"

Transcription

1 AMERICAN NATIONAL STANDARD ANSI/PMMI B Annex L (informative) List of EN (European Norm) packaging machinery standards The following European Norms (standards) or clauses within the standards may apply to packaging machinery if the supplier chooses to use them. This is consistent with the EU interpretation of clause of ISO Guide 78:2008: When of this type-c standard are different from those which are stated in type-a or B standards, the of this type-c standard take precedence over the of the other standards for machines that have been designed and built according to the of this type-c standard. The key wording is that have been designed and built according to the of this type-c standard. Compliance to the EU machinery directive 2006/42/EC does not require the supplier to use type-c standards. However if a type-c standard is used and listed on the Declaration of Conformity the machine must be compliant to the listed standards. The EU Machinery Directive requires the supplier to meet the essential health and safety contained in Annex 1 of the directive. EN 415-1: Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment EN 415-2:1999 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines EN 415-4:1997 Safety of packaging machines - Part 4: Palletizer and Depalletizer EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines EN 415-7:2006+A1: Safety of packaging machines - Part 7: Group and secondary packaging machines EN 415-8: Safety of packaging machines - Part 8: Strapping machines EN 415-9: Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 EN :2014 Safety of packaging machines Part 10: General Informative Note: - ISO, IEC and most EN standards are available from the ANSI Standards Store at ISO Committee ISO TC 199 Safety of Machinery NO = ISO Technical Committee NO = ISO Technical committee CEN Committee CEN TC 114 Safety of Machinery CEN TC 146 Packaging Machinery CEN TC 153 Hygiene Link to the EU directives Copyright 2016 PMMI All rights reserved 89

2 AMERICAN NATIONAL STANDARD ANSI/PMMI B Annex M (Informative) List of some of the type C Harmonized standards under the EU machinery directive for food processing, plastic and paper manufacturing. Source Food Processing EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene EN 1539:2009 Dryers and ovens, in which flammable substances are released - Safety EN :2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene EN 12042:2014 Food processing machinery - Automatic dough dividers - Safety and hygiene EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene EN 12463:2004+A1:2011 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene EN 12853:2001+A1:2010 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene Copyright 2016 PMMI All rights reserved 90

3 AMERICAN NATIONAL STANDARD ANSI/PMMI B EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene Bulk Storage EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC for equipment for mechanical handling of bulk materials except fixed belt conveyors EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC for equipment for mechanical handling of unit loads EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC for fixed belt conveyors for bulk materials Thermoprocessing EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety for industrial thermoprocessing equipment EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety for combustion and fuel handling systems EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety for the generation and use of atmosphere gases EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment Converting Machinery - Paper EN :2004+A1:2010 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 1: Common EN :2006+A1:2010 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery EN :2002+A1:2009 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 3: Cutting machines EN :2004+A1:2009 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines EN :2000+A1:2010 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 1: Common EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 2: Barking drums EN :2011 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 5: Sheeters Copyright 2016 PMMI All rights reserved 91

4 AMERICAN NATIONAL STANDARD ANSI/PMMI B EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 6: Calender EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 7: Chests EN :2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 8: Refining plants EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 14: Reel splitter EN :2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines EN :2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 17: Tissue making machines EN :2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 21: Coating machines EN :2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 22: Wood Grinders EN :2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines EN :2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 27: Roll handling systems Converting Machinery Plastic and Rubber EN :2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety for extruders EN :2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety for haul-offs EN :1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety for metering and mixing units EN :2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety for blade granulators EN :2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety for shredders EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety Copyright 2016 PMMI All rights reserved 92

5 AMERICAN NATIONAL STANDARD ANSI/PMMI B Annex N (Informative) Standards Visual Mapping (from ANSI B11.0 Annex K) There are many standards that apply to the safety of machinery. This Annex contains a visual presentation of many of the more common Type-B standards used in the safe design and use of machinery across various world regions. The reader is cautioned that this listing is not comprehensive, nor is it intended to imply a direct correlation between similar standards in different regions. Other standards may apply to a specific machine or application. The information contained in this annex was current as of the date of publication. Copyright 2016 PMMI All rights reserved 93

6 AMERICAN NATIONAL STANDARD ANSI/PMMI B Figure 1 ANSI standards applicable in the United States Copyright 2016 PMMI All rights reserved 94

7 AMERICAN NATIONAL STANDARD ANSI/PMMI B Figure 2 EN Norms (EU standards) applicable in the European Union Copyright 2016 PMMI All rights reserved 95

8 AMERICAN NATIONAL STANDARD ANSI/PMMI B Figure 3 International standards (ISO & IEC only; other international standards may apply) Copyright 2016 PMMI All rights reserved 96

(Notices) EUROPEAN COMMISSION

(Notices) EUROPEAN COMMISSION 26.5.2010 Official Journal of the European Union C 136/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

More information

(Notices) EUROPEAN COMMISSION

(Notices) EUROPEAN COMMISSION 20.7.2011 Official Journal of the European Union C 214/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

More information

GENERAL KNOWLEDGE OF HYGIENIC DESIGN

GENERAL KNOWLEDGE OF HYGIENIC DESIGN UNIVERSITY OF NATURAL RESOURCES AND LIFE SCIENCES DEPARTMENT OF FOOD SCIENCE AND TECHNOLOGY FOOD QUALITY ASSURANCE GENERAL KNOWLEDGE OF HYGIENIC DESIGN SARUNE ZASYTYTE Sarune_z@yahoo.com VIENNA, 2014 Learning

More information

BakeMax Dough Mini Moulder BMMDM02

BakeMax Dough Mini Moulder BMMDM02 BakeMax Dough Mini Moulder BMMDM02 2 Instruction Manual 1. Preface ------------------------------------------- P2 2. Machine Introduction -------------------------------- P2 3. Machine Specification and

More information

one stop shop custom built solutions filtration & packaging Consulting New equipment Service & spare parts Reconditioning Go to main menu

one stop shop custom built solutions filtration & packaging Consulting New equipment Service & spare parts Reconditioning Go to main menu one stop shop custom built solutions filtration & packaging Consulting New equipment Service & spare parts Reconditioning Go to main menu Select your presentation of interest below Filtration See Custom

More information

+91-8048077420 Join Pack s Private Limited http://www.joinpackstrapping.com/ Join Pack s is a Manufacturer, Supplier, Wholesaler & Service Provider of Strapping & Carton Taping, Stretch & Shrink Wrapping

More information

Sugar grinder machine: Hammer type sugar grinder comprises of an impeller having four pin jointed hammers driven by motor. The high speed impeller

Sugar grinder machine: Hammer type sugar grinder comprises of an impeller having four pin jointed hammers driven by motor. The high speed impeller Sugar grinder machine: Hammer type sugar grinder comprises of an impeller having four pin jointed hammers driven by motor. The high speed impeller will implant a centrifugal motion to sugar feed into the

More information

IN-LINE THERMOFORMING MACHINES. Complete turn key IN-LINE installations. from material handling through to boxing units of finished products

IN-LINE THERMOFORMING MACHINES. Complete turn key IN-LINE installations. from material handling through to boxing units of finished products IN-LINE THERMOFORMING MACHINES Complete turn key IN-LINE installations from material handling through to boxing units of finished products More than just fast: Reliable the IN LINE process IN LINE technology

More information

IN-LINE THERMOFORMING MACHINES. Complete turn key IN-LINE installations. from material handling through to boxing units of finished products

IN-LINE THERMOFORMING MACHINES. Complete turn key IN-LINE installations. from material handling through to boxing units of finished products IN-LINE THERMOFORMING MACHINES Complete turn key IN-LINE installations from material handling through to boxing units of finished products More than just fast: Reliable the IN LINE process IN LINE technology

More information

Processing and packaging of meat and poultry. Your partner for plant engineering and construction.

Processing and packaging of meat and poultry. Your partner for plant engineering and construction. PLanning PRODUcTION implementation Processing and packaging of meat and poultry Your partner for plant engineering and construction www.emf.de Our comprehensive range of services: Planning of food processing

More information

Grow your food business with us.

Grow your food business with us. Categories of businesses represented by the Midwest Food Processors Association. Source: MWFPA Membership Directory and Industry Resource Guide. 2016-2017 Grow your food business with us. In total, MWFPA

More information

HANDLING AND WRAPPING FOR PAPER MILLS AUTOMATION SYSTEMS FOR PRINTING HOUSES OR FOR CONVERTING AUTOMATED WAREHOUSES

HANDLING AND WRAPPING FOR PAPER MILLS AUTOMATION SYSTEMS FOR PRINTING HOUSES OR FOR CONVERTING AUTOMATED WAREHOUSES SINCE 1962 MANUFACTURER OF HANDLING SYSTEMS FOR THE PAPER INDUSTRY HANDLING AND WRAPPING FOR PAPER MILLS AUTOMATION SYSTEMS FOR PRINTING HOUSES OR FOR CONVERTING AUTOMATED WAREHOUSES PULP PREPARATION PULPER

More information

CONTINUOUS HANDLING EQUIPMENT AND

CONTINUOUS HANDLING EQUIPMENT AND IRISH STANDARD I.S. EN 620:2002 ICS 53.040.10 CONTINUOUS HANDLING EQUIPMENT AND National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 SYSTEMS - SAFETY AND EMC REQUIREMENTS

More information

TWELFTH SCHEDULE 434 * [Sections 65A and 65C] PART I - Equipment applicable to a planter or an horticulturist

TWELFTH SCHEDULE 434 * [Sections 65A and 65C] PART I - Equipment applicable to a planter or an horticulturist MRA The Value Added Tax Act 91 TWELFTH SCHEDULE 434 * [Sections 65A and 65C] PART I - Equipment applicable to a planter or an horticulturist Tractors up to 120 hp, trailers, ploughs, furrowers, tillers,

More information

Leading Manufacturer, Exporter and Supplier of Packaging machine & Food Processing Machines, Corn Puff Snacks, kurkure, Soya Nugget Extruder machine.

Leading Manufacturer, Exporter and Supplier of Packaging machine & Food Processing Machines, Corn Puff Snacks, kurkure, Soya Nugget Extruder machine. Leading Manufacturer, Exporter and Supplier of Packaging machine & Food Processing s, Corn Puff Snacks, kurkure, Soya Nugget Extruder machine. Automatic Form Fill Seal, VFFS, Automatic Collar Type Packaging

More information

IN-line. thermoforming system. More than just fast: Reliable

IN-line. thermoforming system. More than just fast: Reliable IN-line thermoforming system INTEC 500/700/900/1000/1100 serie Complete IN-LINE plants for cups, plates and yogurt pots INTEC: High EFFICIENCY - High quality More than just fast: Reliable the IN-line process

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 12643-3 Second edition 2010-12-15 Graphic technology Safety requirements for graphic technology equipment and systems Part 3: Binding and finishing equipment and systems Technologie

More information

The CAD systems not only speed up initial design work, but enhance manufacturing accuracy and improve quality control.

The CAD systems not only speed up initial design work, but enhance manufacturing accuracy and improve quality control. WWW.SOLITEC.CO.UK A TRADITION OF INNOVATION With over twenty-five years of experience, Solitec is a pioneer in the solids handling industry. Worldwide patents confirm Solitec s innovative approach. Using

More information

Focus SYSTEM ENHANCEMENTS

Focus SYSTEM ENHANCEMENTS Focus AUXILIARY SYSTEM COMPONENTS SYSTEM ENHANCEMENTS Vecoplan Auxiliaries Solutions To Enhance Your Existing System In addition to engineering and manufacturing the finest shredding equipment available,

More information

ISO INTERNATIONAL STANDARD. Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications

ISO INTERNATIONAL STANDARD. Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications INTERNATIONAL STANDARD ISO 15642 First edition 2003-05-15 Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications Équipement pour la construction et

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 12643-3 First edition 2008-03-01 Graphic technology Safety requirements for graphic technology equipment and systems Part 3: Binding and finishing equipment and systems Technologie

More information

The Best Solutions In Material Handling

The Best Solutions In Material Handling D E L I V E R Y P R O G R A M The Best Solutions In Material Handling J-Tec Material Handling creates solutions for storing, handling, dosing and processing dry and liquid ingredients. Solutions can extend

More information

Sampling and sample reduction of solid biofuels

Sampling and sample reduction of solid biofuels www.ofi.at Sampling and sample reduction of solid biofuels Martin Englisch ofi - Austria CEN 335 - Technical Specifications Currently CEN/TS 14778-1:2006 Solid biofuels Sampling Part1: Methods for sampling

More information

Schedule of Accreditation

Schedule of Accreditation Schedule of Accreditation Organisation Name INAB Reg No 6021 Contact Name Address Safenet Certification Services Ltd Peter McNicol Contact Phone No 0044 7725 995421 Email Website Accreditation Standard

More information

Sharp Engineering.

Sharp Engineering. +91-8048762472 Sharp Engineering https://www.sharpstrap.com/ We are a well-known manufacturer, exporter, trader, wholesaler and retailer of the wide assortment of Packaging Machines. These products are

More information

Fu l l y I nte g rate d. Product Family Overview

Fu l l y I nte g rate d. Product Family Overview G r a n u lators Sh re d d e rs Product Family Overview P r e ci si o n En g in e e re d Fu l l y I nte g rate d Optimize your operation, reduce material costs and advance sustainability with Cumberland

More information

Building construction machinery and equipment Plants for the preparation of concrete and mortar. Part 1: Terminology and commercial specifications

Building construction machinery and equipment Plants for the preparation of concrete and mortar. Part 1: Terminology and commercial specifications Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 19720-1 First edition 2017-06 Building construction machinery and equipment Plants for the preparation of concrete and mortar Part 1: Terminology

More information

The WTW / MHC Group: Handling of Alternative Fuels in a Spanish Cement Plant

The WTW / MHC Group: Handling of Alternative Fuels in a Spanish Cement Plant The WTW / MHC Group: Handling of Alternative Fuels in a Spanish Cement Plant Global Fuels Supplier of the Year 2011 Mr. Jürgen Bäumer of WTW Americas accepts the award for the Global Fuels Supplier of

More information

OUR AIMS. Maximum productivity and reliability of all components. Constant repetition of the wrapping quality on protected surfaces.

OUR AIMS. Maximum productivity and reliability of all components. Constant repetition of the wrapping quality on protected surfaces. S u r f a c e A l u m i n i u m Te c h PACKAGING Specifically dedicated to the design and production of packaging lines, that are fully automated for extruded, anodized and painted aluminium profiles.

More information

Shredding TIRE RE-SHREDDERS RTR SERIES

Shredding TIRE RE-SHREDDERS RTR SERIES Shredding TIRE RE-SHREDDERS RTR SERIES Vecoplan - Our History Vecoplan was founded in 1969 in Bad Marienberg, Germany as a manufacturer of high quality wood chippers. In the early 1980 s, Vecoplan s focus

More information

IAS Accreditation Number ELTEK International Laboratories

IAS Accreditation Number ELTEK International Laboratories IAS Accreditation Number TL-457 Company Name Address 248 Hughes Lane St. Charles, Missouri 63301 Contact Name Lisa Horner, Quality Manager Telephone +1 (636) 949-5835 Effective Date of Scope July 20, 2018

More information

Ability Fabricators Inc.

Ability Fabricators Inc. Ability Fabricators Inc. Your Partner For Custom Stainless Steel Fabrication & Process Equipment Tel: 1-905-761-1401 1-877-428-4866 Fax: 1-905-761-0649 Email: sales@abilityfab.com 187 Romina Drive, Concord

More information

IN-line. thermoforming system. More than just fast: Reliable

IN-line. thermoforming system. More than just fast: Reliable IN-line thermoforming system INTEC 500/700/900/1000/1100 serie Complete IN-LINE plants for cups, plates and yogurt pots INTEC: HIGH EFFICIENCY - HIGH QUALITY More than just fast: Reliable the IN-line process

More information

GAMA Headquarters 355 Lexington Avenue, 15th Floor New York, NY USA INTRODUCTION

GAMA Headquarters 355 Lexington Avenue, 15th Floor New York, NY USA INTRODUCTION INTRODUCTION The Global Acetate Manufacturer s Association is pleased to provide information on the handling of Cellulose Acetate Filter Tow Bales. For more information on GAMA and its members please visit

More information

+91-8048762472 Sharp Engineering http://www.sharpstrap.com/ We are a well-known manufacturer, exporter, trader, wholesaler and retailer of the wide assortment of Packaging Machines. These products are

More information

Our BUBBLES orient your products

Our BUBBLES orient your products GAP, Tailor extrusion film line manufactured, specialized in exclusive and dedicated extrusion film lines for: double bubble and three air trapped bubble for simultaneous no contact biaxial film orientation

More information

Your cutting machines specialist for fresh and frozen products.

Your cutting machines specialist for fresh and frozen products. GEFRIERSCHNEIDER GMBH Your cutting machines specialist for fresh and frozen products. MADE IN GERMANY Welcome to MAGURIT As a world leader and only specialist in the processing of frozen products we offer

More information

The Ultimate Pasta Press

The Ultimate Pasta Press The Ultimate Pasta Press 2 Demaco Simplicity The Ultimate Pasta Press The Ultimate Pasta Press The press of the Pastaio (master pasta maker), designed for endurance and ease of operation. DEMACO machines

More information

Process Engineering Systems

Process Engineering Systems Process Engineering Systems Establishing Performance Standards Axtel brings in more than 30 years of experience in the Food Processing Segment. Our design, engineering and manufacturing capabilities are

More information

INTRODUCTION TO PULP & PAPER TECHNOLOGY LEARNING OUTCOMES

INTRODUCTION TO PULP & PAPER TECHNOLOGY LEARNING OUTCOMES INTRODUCTION TO PULP & PAPER TECHNOLOGY LEARNING OUTCOMES OVERALL COURSE LEARNING OBJECTIVES The overall course objective is to give participants increased confidence in understanding the pulp & paper

More information

Safety in system: Protection for man and machine

Safety in system: Protection for man and machine Safety in system: Protection for man and machine Safety in system: Protection for man and machine more than60 years of experience more than 20,000 different products more than 1,000 Crore INR turnover

More information

+91-8071678443 Jmd Packaging s http://www.jmdpackagingmachines.com/ We are one of the best suppliers and wholesalers of assortment of Packaging s that is quite popular in the market due to their seamless

More information

United Surface Technologies

United Surface Technologies United Surface Technologies Engineered Coating Solutions Established 1986 www.ust.com.au Introduction United Surface Technologies (UST) Pty Ltd is an ISO 9001:2008 certified surface engineering company

More information

Unit D: Agricultural Equipment Systems. Lesson 6: Operating, Calibrating, and Maintaining Forage Harvesting and Handling Systems

Unit D: Agricultural Equipment Systems. Lesson 6: Operating, Calibrating, and Maintaining Forage Harvesting and Handling Systems Unit D: Agricultural Equipment Systems Lesson 6: Operating, Calibrating, and Maintaining Forage Harvesting and Handling Systems 1 Terms Baling Cutterbar lead Direct cut silage Green chop Hay Haylage Knife

More information

+91-8048764402 Archana Extrusion Machinery Manufacturing http://www.archanaextrusionmachine.com/ We are amongst the prominent manufacturers, exporters and suppliers of a wide range of plastic processing

More information

Accreditation Scope by Certification Test Order

Accreditation Scope by Certification Test Order Organization NEMA MW 1000 NEMA RE-2 Section 4.11 ASTM D149 ASTM D150 ASTM D256 ASTM D257 ASTM D495 ASTM D570 ASTM D635 ASTM D638 ASTM D790 ASTM D882 ASTM D1653 ASTM D1676 ASTM D1822 ASTM D1830 ASTM D1876

More information

HIGH PILED COMBUSTIBLE STORAGE CITY OF NOVI SUBMITTAL CHECKLIST In Accordance with Chapter 23 of the 2006 International Fire Code

HIGH PILED COMBUSTIBLE STORAGE CITY OF NOVI SUBMITTAL CHECKLIST In Accordance with Chapter 23 of the 2006 International Fire Code Project Name/Tenant: HIGH PILED COMBUSTIBLE STORAGE CITY OF NOVI SUBMITTAL CHECKLIST In Accordance with Chapter 23 of the 2006 International Fire Code Site Address: Applicant: Phone: Bldg/Unit/Suite: A

More information

Dalian Zhongsheng Metal Products Co.,Ltd.

Dalian Zhongsheng Metal Products Co.,Ltd. Dalian Zhongsheng Metal Products Co.,Ltd. CONTENT DZS JZQ350 VACUUM CLAY BRICK MACHINE...02 05 DZS JZQ400 VACUUM CLAY BRICK MACHINE...06 09 DZS JZQ450 VACUUM CLAY BRICK MACHINE...10 13 DZS JZQ500 VACUUM

More information

+91-8048602863 Avi International Packaging Company http://www.avipackingmachine.com/ AVI International & Packaging New Delhi is highly appreciated in the market for providing all kinds of Industrial Packing

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 11148-12 First edition 2012-12-01 Hand-held non-electric power tools Safety requirements Part 12: Circular, oscillating and reciprocating saws Machines portatives à moteur non

More information

Manual French fries cutter

Manual French fries cutter French fries cutters (manual, electrical & hydro) Manual French fries cutter Table top type Cutter insert & blade frame 6 mm 8 mm 10 mm 13 mm On sturdy tripod French fries cutting machine A specially designed

More information

COMBI SHREDDER Inline Shredder/Granulator System

COMBI SHREDDER Inline Shredder/Granulator System Size Reduction Applications COMBI SHREDDER Inline Shredder/Granulator System Rugged Versatility Operator-Friendly Innovative Space-optimizing designs for a wide range of plastics and post-consumer resin

More information

Heat Protection Materials Slide-Bearing Materials Ablation Materials

Heat Protection Materials Slide-Bearing Materials Ablation Materials Heat Protection Materials Slide-Bearing Materials Ablation Materials www.brandenburger-isoliertechnik.com Brandenburger Isoliertechnik Reliable - Trustable - Innovative Your specialist for heat protection

More information

COUNCIL REGULATION (EU)

COUNCIL REGULATION (EU) EN L 94/2 Official Journal of the European Union 8.4.2011 REGULATIONS COUNCIL REGULATION (EU) No 333/2011 of 31 March 2011 establishing criteria determining when certain types of scrap metal cease to be

More information

Unit 2M.3 & 2M.4: Natural and man-made materials and changing materials

Unit 2M.3 & 2M.4: Natural and man-made materials and changing materials Unit 2M.3 & 2M.4: Natural and man-made materials and changing materials Natural and man-made materials. Shaping materials Heating materials Science Skills Observing Classifying Predicting Experimenting

More information

Wood Densification WHAT IS WOOD DENSIFICATION? 2. Pellets - small cylinders about 1/2 to 1-1/2 inches in diameter and about 1 to 2 inches

Wood Densification WHAT IS WOOD DENSIFICATION? 2. Pellets - small cylinders about 1/2 to 1-1/2 inches in diameter and about 1 to 2 inches West Virginia University Extension Service Publication No. 838 Wood Densification WHAT IS WOOD DENSIFICATION? Wood densification is the process of taking wood by-products (manufacturing residues) such

More information

KEE HING CHEUNG KEE CO., LTD. DLFTZ CHANG HING KEE INT L INDUSTRY & TRADE CO., LTD.

KEE HING CHEUNG KEE CO., LTD. DLFTZ CHANG HING KEE INT L INDUSTRY & TRADE CO., LTD. KEE HING CHEUNG KEE CO., LTD. DLFTZ CHANG HING KEE INT L INDUSTRY & TRADE CO., LTD. VACUUM CLAY BRICK MACHINE CONTENT KHCK-JZQ350 VACUUM CLAY BRICK MACHINE...02-05 KHCK-JZQ400 VACUUM CLAY BRICK MACHINE...06-09

More information

EASY CONVEYORS OVERVIEW

EASY CONVEYORS OVERVIEW EASY CONVEYORS OVERVIEW TABLE TOP CONVEYOR SYSTEMS MAT TOP CONVEYOR SYSTEMS CONVEYOR COMPONENTS BELT CONVEYORS SYSTEMS ROLLER CONVEYOR SYSTEMS www.autoline.net.nz www.easy-conveyors.com Easy Conveyors

More information

+91-8048723022 Standard Scientific Instrument Co. http://www.siscoindia.co/ Manufacturer, supplier and trader of quality assured testing equipments and machines for testing materials and products in requisite

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.

More information

THE ROLE OF EXTRUSION TECHNOLOGY ON FEED SAFETY AND HYGIENE

THE ROLE OF EXTRUSION TECHNOLOGY ON FEED SAFETY AND HYGIENE THE ROLE OF EXTRUSION TECHNOLOGY ON FEED SAFETY AND HYGIENE Mian N. Riaz, Ph.D Texas A&M University USA Pellet presses and many other feed processing technologies result in an agglomerated or pelleted

More information

American Society of Agricultural and Biological Engineers

American Society of Agricultural and Biological Engineers ASAE S374 MAR1975 (R2015) Terminology and Specification Definitions for Agricultural Auger Conveying Equipment American Society of Agricultural and Biological Engineers ASABE is a professional and technical

More information

Standard Scientific Instrument Co.

Standard Scientific Instrument Co. +91-8048723022 Standard Scientific Instrument Co. https://www.siscoindia.co/ Manufacturer, supplier and trader of quality assured testing equipments and machines for testing materials and products in requisite

More information

MDI polymeric (Methane diphenyl diisocyanate)

MDI polymeric (Methane diphenyl diisocyanate) DESCRIPTION Two-component polyurethane system (polyol and isocyanate) formulated to obtain closed-cell rigid foams to be sprayed-in-place for thermal insulation. was developed using the 4 th generation

More information

INDUSTRIAL GUIDELINES ON TRACEABILITY OF MATERIALS AND ARTICLES FOR FOOD CONTACT

INDUSTRIAL GUIDELINES ON TRACEABILITY OF MATERIALS AND ARTICLES FOR FOOD CONTACT INDUSTRIAL GUIDELINES ON TRACEABILITY OF MATERIALS AND ARTICLES FOR FOOD CONTACT 0 INDEX I. OBJECTIVE 1 II. SCOPE 2 Page II.1 Materials 3 II.2 Applications 3 III. STAKEHOLDERS WITHIN THE FOOD 4 CONTACT

More information

FLEXIBLE PRODUCTION SYSTEMS BASED ON MARKETLEADING TECHNOLOGIES

FLEXIBLE PRODUCTION SYSTEMS BASED ON MARKETLEADING TECHNOLOGIES We have unparalleled experience in producing and supplying steel belt cooling systems, meeting the production, quality and environmental needs of customers from across the chemical and food industries.

More information

OUR BRANDS. OUR OFFERINGS. OUR STORY.

OUR BRANDS. OUR OFFERINGS. OUR STORY. OUR BRANDS. OUR OFFERINGS. OUR STORY. A DURAVANT COMPANY It s the Company Behind the Machine that Makes a Difference. Recognized as a premium manufacturer of highly engineered food processing equipment

More information

OUR BRANDS. OUR OFFERINGS. OUR STORY.

OUR BRANDS. OUR OFFERINGS. OUR STORY. 4780 NW 41st St, Ste. 100 Riverside, MO 64150 Tel 913.888.3333 Toll Free 800.862.7536 Fax 913.888.6440 email: sales@marlen.com www.marlen.com OUR BRANDS. OUR OFFERINGS. OUR STORY. A DURAVANT COMPANY It

More information

Stock Specialty Attachment Chain

Stock Specialty Attachment Chain ATTACHMENT CHAIN FOR SPECIALTY APPLICATIONS Stock Specialty Chain AVAILABLE FOR IMMEDIATE DELIVERY U.S. Tsubaki offers a full line of industry specific specialty chains FROM STOCK. This section illustrates

More information

EUROFER position paper 1 determining the borderline between preparations/articles for steel and steel products

EUROFER position paper 1 determining the borderline between preparations/articles for steel and steel products EUROFER position paper 1 determining the borderline between preparations/articles for steel and steel products Background Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18

More information

Providing research solutions for the food, feed and biorenewables industries.

Providing research solutions for the food, feed and biorenewables industries. Providing research solutions for the food, feed and biorenewables industries www.ccur.iastate.edu RESEARCH SOLUTIONS DESIGNED FOR YOUR NEEDS. WORLD-CLASS FACILITIES IN A UNIVERSITY SETTING For over 30

More information

Table of Content. Page No

Table of Content. Page No Junior Rubber Junior Technician Rubber Technician Table of Content S. No. Modules and Units 1. Global & National Status of Rubber Industry Unit 1.1 - Global and National Status of Rubber Industry 2. Machines

More information

Automatic Coiling Technology

Automatic Coiling Technology Automatic Coiling Technology Pipe Coil Technology Limited specialise in automatic coiling systems for use with a wide range of plastic pipe, tube, hose and conduit. In all applications the replacement

More information

Packaging solutions MultiFresh

Packaging solutions MultiFresh Packaging solutions MultiFresh MULTIVAC is the world s leading manufacturer of packaging machines. Each of these machines is individually designed to the customer's requirements in terms of pack design,

More information

Size Reduction Specialists

Size Reduction Specialists Size Reduction Specialists Franklin Miller Inc. is a leader in size reduction technology. For three generations we have been designing and building size reduction processors to meet or exceed our customers

More information

EI MACHINERY PVT. LTD

EI MACHINERY PVT. LTD EI MACHINERY PVT. LTD Manufacturer of End of Line Packing Machinery and Conveyor Automation B3, Karnavati Estate, Trikampura Patia, GROUP COMPANY OF ELITE Vatwa GIDC PHASE 3, www.elitegroupcompanies.com

More information

Global Packaging. Global Packaging. BAKERY, BISCUITS AND CONFECTIONERY Packaging solutions

Global Packaging. Global Packaging. BAKERY, BISCUITS AND CONFECTIONERY Packaging solutions Global Packaging Global Packaging BAKERY, BISCUITS AND CONFECTIONERY Packaging solutions EN Bakery, biscuits and confectionery Specialists in bakery, biscuits and confectionery This sector needs flexible

More information

Guidance on VOC Substitution and Reduction for Activities Covered by the VOC Solvents Emissions Directive (Directive 1999/13/EC)

Guidance on VOC Substitution and Reduction for Activities Covered by the VOC Solvents Emissions Directive (Directive 1999/13/EC) Guidance on VOC Substitution and Reduction for Activities Covered by the VOC Solvents Emissions Directive (Directive 1999/13/EC) March, 2009 Final Report European Commission - DG Environment Contract ENV/C.4/FRA/2007/001

More information

Stretch Wrapping Technology

Stretch Wrapping Technology Stretch Wrapping Technology VERTICAL STANDARD WRAPPING CYCLE Automatic The wide range strapping of machines includes turn-table, rotating machines, arm and rotating with side ring or type top of stretch

More information

+91-8048720618 Standard Pack Engineering Company http://www.standardpackeng.in/ We are one of the well known manufacturer, supplier, trader and exporter of Industrial Packaging s and many more. These products

More information

Decision on End of Waste Criteria relating to Recycled Low Density Polyethylene (LDPE) pellets for use by Irish Packaging Recycling Ballymount Road

Decision on End of Waste Criteria relating to Recycled Low Density Polyethylene (LDPE) pellets for use by Irish Packaging Recycling Ballymount Road Decision on End of Waste Criteria relating to Recycled Low Density Polyethylene (LDPE) pellets for use by Irish Packaging Recycling Ballymount Road Lower, Dublin 12 Decision establishing End-of-Waste Criteria

More information

Unit D: Agricultural Equipment Systems. Lesson 8: Operating, Calibrating, and Maintaining Feed Handling Systems

Unit D: Agricultural Equipment Systems. Lesson 8: Operating, Calibrating, and Maintaining Feed Handling Systems Unit D: Agricultural Equipment Systems Lesson 8: Operating, Calibrating, and Maintaining Feed Handling Systems 1 Terms The following terms are presented in the lesson. Forage Palatability Pneumatic Roughage

More information

COSVR13 Set up and use circular saws

COSVR13 Set up and use circular saws Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 setting up fixed and/or transportable machinery

More information

2014 HSM No Comparison!

2014 HSM No Comparison! 2014 HSM No Comparison! Presented By: Marshall Eubanks Senior Product Manager HSM of America Andy Blancas Regional Sales Manager HSM of America Agenda HSM and Supplies Network About HSM 2014 Product Overview

More information

EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS

EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS TMX Saws A History of European Quality & Craftsmanship The history of TMX saws dates to 1921 Poland with manufacturing

More information

Pharmatech. Innovation in Pharmaceutical Engineering. Drums & Drum Systems. PharmaDrums. Innovative Processing & Handling Solutions.

Pharmatech. Innovation in Pharmaceutical Engineering. Drums & Drum Systems. PharmaDrums. Innovative Processing & Handling Solutions. Drums & Drum Systems PharmaDrums Innovative Processing & Handling Solutions. PharmaDrums The PharmaDrum System GMP correct Processing Grade Drums have developed a range of high quality drums and accessories

More information

Product Information. Challenge us with your packaging needs and we ll design the ideal machine for you!

Product Information. Challenge us with your packaging needs and we ll design the ideal machine for you! Product Information 2001 County Line Road Warrington, PA 18976 Tel 215.343.1530 Fax 215.343.5293 SIZE, SPEED AND QUANTITY THREE MAJOR FACTORS THAT ENTER INTO YOUR CHOICE OF PACKAGING EQUIPMENT TO OVERWRAP

More information

ISO 4898 INTERNATIONAL STANDARD. Rigid cellular plastics Thermal insulation products for buildings Specifications

ISO 4898 INTERNATIONAL STANDARD. Rigid cellular plastics Thermal insulation products for buildings Specifications Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 4898 Fifth edition 2010-03-01 Rigid cellular plastics Thermal insulation products for buildings Specifications Plastiques alvéolaires rigides Produits

More information

CLAY BRICK PRODUCTION PLANT

CLAY BRICK PRODUCTION PLANT CLAY BRICK PRODUCTION PLANT COMPANY INTRODUCTION AND MARKETING S OF TECHNOS General Information of Manufacturing and Best Opportunity to Marketing Plan for Industrial Equipments and Plants How to make

More information

ADHESIVES CERAMICS CHEMICALS COATINGS COSMETICS FINE CHEMICALS FOODS INKS PHARMACEUTICALS PLASTICS. Performance-Proven Processing Equipment

ADHESIVES CERAMICS CHEMICALS COATINGS COSMETICS FINE CHEMICALS FOODS INKS PHARMACEUTICALS PLASTICS. Performance-Proven Processing Equipment ADHESIVES CERAMICS CHEMICALS COATINGS COSMETICS FINE CHEMICALS FOODS INKS PHARMACEUTICALS PLASTICS Performance-Proven Processing Equipment A World Leader in Process Equipment... Years of experience coupled

More information

1.6S PP SPUNBOND NONWOVEN PRODUCTION LINE. Ⅰ. Application

1.6S PP SPUNBOND NONWOVEN PRODUCTION LINE. Ⅰ. Application 1.6S PP SPUNBOND NONWOVEN PRODUCTION LINE Ⅰ. Application This equipment is suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material

More information

- Sawing trunks or logs, saws specially adapted therefor: B27B 1/00, B27B 3/00, B27B 7/00, B27B 15/00

- Sawing trunks or logs, saws specially adapted therefor: B27B 1/00, B27B 3/00, B27B 7/00, B27B 15/00 B27B SAWS FOR WOOD OR SIMILAR MATERIAL; COMPONENTS OR ACCESSORIES THEREFOR (saws specially adapted for pruning or debranching A01G 3/08; sawing apparatus specially adapted for felling trees A01G 23/091;

More information

ISO Industrial furnaces and associated processing equipment Safety Part 1: General requirements

ISO Industrial furnaces and associated processing equipment Safety Part 1: General requirements INTERNATIONAL STANDARD ISO 13577-1 First edition 2012-06-01 Industrial furnaces and associated processing equipment Safety Part 1: General requirements Fours industriels et équipements associés Sécurité

More information

WHOLE GRAIN FLOUR ACCORDING TO DIN WHOLE GRAIN GRINDING SPICES GRINDING HERBS GLUTEN-FREE GRINDING

WHOLE GRAIN FLOUR ACCORDING TO DIN WHOLE GRAIN GRINDING SPICES GRINDING HERBS GLUTEN-FREE GRINDING WHOLE GRAIN FLOUR ACCORDING TO DIN 10355 WHOLE GRAIN GRINDING SPICES GRINDING HERBS GLUTEN-FREE GRINDING MULTI-AWARD-WINNING QUALITY STARTS WITH MILLING! Product made by Treffler Maschinenbau GmbH & Co.

More information

Poly methyl methacrylate (PMMA) Eco-profiles and Environmental Product Declarations of the European Plastics Manufacturers January 2015

Poly methyl methacrylate (PMMA) Eco-profiles and Environmental Product Declarations of the European Plastics Manufacturers January 2015 Poly methyl methacrylate (PMMA) Eco-profiles and Environmental Product Declarations of the European Plastics Manufacturers January 2015 1 2 Environmental Product Declaration Introduction This Environmental

More information

WORKING DOCUMENT EN EN EN

WORKING DOCUMENT EN EN EN EN EN EN Draft COMMISSION REGULATION (EU) No /.. of [ ] establishing criteria determining when copper scrap cease to be waste under Directive 2008/98/EC of the European Parliament and of the Council EN

More information

Gasketing Technology. Foam In-Situ Gasket POLYURETHANE TECHNOLOGIES

Gasketing Technology. Foam In-Situ Gasket POLYURETHANE TECHNOLOGIES Gasketing Technology Foam In-Situ Gasket Lighting Electrical and Electronic Containers and Packaging Automotive Appliance Filtration POLYURETHANE TECHNOLOGIES Gasketing Technology The Technology The Cannon

More information

Better than handmade.

Better than handmade. Better than handmade. Roboter- und Transportsysteme Robot and Conveying Systems for the baking industry Pan Conveyors Packaging Robots Peelboard Conveyors Depanner Pan Stores Scaling Robots Basket Conveyors

More information

Custom Fabrication. Vestil - Material Handling Manufacturing Solutions. If you can dream it... We can build it. PRODUCTS MADE IN THE USA

Custom Fabrication. Vestil - Material Handling Manufacturing Solutions. If you can dream it... We can build it. PRODUCTS MADE IN THE USA Vestil - Material Handling Manufacturing Solutions PRODUCTS MADE IN THE USA 48 HOUR QUICK SHIP PROGRAM NEW PRODUCT DEVELOPMENT FOCUS INNOVATIVE PRODUCT SOLUTIONS CUSTOM PRODUCT FABRICATION COLOR-MATCH

More information