Float standard programme
|
|
|
- Ross Parrish
- 6 years ago
- Views:
Transcription
1 Float standard programme A/M/K Dimension (mm):ø40 x 27 POM T/C/I Dimension (mm): Ø30 x R/S/U Dimension (mm):ø30 x 44 NBR Part No.: Part No.: Part No.: V/L/D Dimension (mm):ø42 x N/P Dimension (mm): Ø44 x E/F Dimension (mm): Ø Part No.: Part No.: Part No.: B/O Dimension (mm): Ø G/H Dimension (mm): Ø Part No.: Part No.:
2 Adjustable floats V/L/D Dimension (mm):ø52 x N/P Dimension (mm):ø52 x Part No.: Part No.: Sensors Miniature floats K1 Dimension (mm):ø25 x K2 Dimension (mm):ø25 x K4 Dimension (mm):ø23 x 25 NBR Part No.: Part No.: Art.-Nr.: K3 Dimension (mm):ø20 x 20 NBR N1 Dimension (mm): Ø Part No.: Art.-Nr.:
3 Standard magnetic float switches Electrical data Contact ID letter Rated voltage (max). Rated current (max.) Switching capacity (max.) Changeover contact/normally-closed contact/normally-open contact K 0.5 A 30 VA Changeover contact/normally-closed contact/normally-open contact L 1 A 60 VA Mechanical data Container connection options Flange enclosures RD 120 mm Flange enclosures RD 77 mm Flange enclosures RD 165 mm Flange enclosures RD 185 mm Cable gland PG 9 Cable gland R1/5'' with plug connection DIN Oval flange 75 x 50 mm with plug-in connec. DIN43650 Flange enclosures RD 120 mm Flange enclosures RD 77 mm Flange enclosures RD 165 mm Flange enclosures RD 185 mm Cable gland Pg 9 Cable gland R1/5'' with plug connection DIN Oval flange 75 x 50 mm with plug-in connec. DIN43650 Materials switching tube Float variants A / M / K Cylinder floats RD 40 x 27 mm (POM) T / C / I Cylinder floats RD 30 x 44 mm () V / D Cylinder floats RD 42 x 44 mm (NBR) R / SCylinder floats RD 30 x 44 mm (NBR) N / P Cylinder floats RD 44 x 45 mm (stainless steel) E / F Ball floats RD 52 mm (stainless steel) B / O Ball floats RD 62 mm (stainless steel) G / H Ball floats RD 84 mm (stainless steel) A / M / K Cylinder floats RD 40 x 27 mm (POM) T / C / I Cylinder floats RD 30 x 44 mm () V / D Cylinder floats RD 42 x 44 mm (NBR) R / SCylinder floats RD 30 x 44 mm (NBR) N / P Cylinder floats RD 44 x 45 mm (stainless steel) E / F Ball floats RD 52 mm (stainless steel) B / O Ball floats RD 62 mm (stainless steel) G / H Ball floats RD 84 mm (stainless steel) Ambient conditions Protection type (DIN 40050) Temperature range Pressure 5 bar (up to 25 bar, on request) 5 bar (up to 25 bar, on request) 234
4 Miniature magnetic float switches Electrical data Sensors Contact ID letter Rated voltage (max). Rated current (max.) Switching capacity (max.) Normally-closed contact / normally-open contact B 0.5 A 10 VA Changeover contact/normally-closed contact/normally-open contact X 100 V AC/DC 0.3 A 3 VA Mechanical data Container connection options Cable gland Pg 7 Cable gland R1/8'' with plug Cable gland Pg 7 Cable gland R1/8'' with plug Materials switching tube Float variants K1 / Cylinder floats RD 25 x 20 mm () K1 / Cylinder floats RD 25 x 20 mm () K2 / Cylinder floats RD 25 x 20 mm () K2 / Cylinder floats RD 25 x 20 mm () K3 / Cylinder floats RD 20 x 20 mm (NBR) K3 / Cylinder floats RD 20 x 20 mm (NBR) K4 / Cylinder floats RD 23 x 25 mm (NBR) K4 / Cylinder floats RD 23 x 25 mm (NBR) N1 / Ball floats RD 30 mm (stainless steel) N1 / Ball floats RD 30 mm (stainless steel) Ambient conditions Protection type (DIN 40050) Temperature range Pressure 235
5 Adjustable magnetic float switches Electrical data Contact ID letter Switching module type Part No. Rated voltage (max). Rated current (max.) Switching capacity (max.) P REEDK. KPL. F. MA Normally-open contact / normally-closed contact 5 A 250 VA (bi) L REEDK. KPL. F. MA Changeover contact 1 A 60 VA (bi) Mechanical data Container connection options Flange DN 50 ( / stainless steel) Flange DN 65 ( / stainless steel) Cable gland R1.5'' ( / stainless steel) Cable gland R2'' ( / stainless steel) Flange encl. RD 120 mm (with gush protect. possible) Flange DN 50 ( / stainless steel) Flange DN 65 ( / stainless steel) Cable gland R1.5'' ( / stainless steel) Cable gland R2'' ( / stainless steel) Flange encl. RD 120 mm (with gush protect. possible) Materials switching tube Float variants N / PCylinder floats RD 52 x 55 mm (stainless steel) V / D / L Cylinder floats RD 52 x 55 mm () N / PCylinder floats RD 52 x 55 mm (stainless steel) V / D / L Cylinder floats RD 52 x 55 mm () Ambient conditions Protection class (DIN 40050) Temperature range Pressure 236
6 Chemical reistance of float and switching tube material at +20 C Chemical substance Conc. in % POM NBR MS Acetone U U + + Aluminium sulphate 10 / U + Aluminium chloride 10 / U + Formic acid U + U + Ammonia U O U + Aniline 100 / + U U O + Ethyl acetate 100 O O U U + + Sulphuric ether U / + + Ethylene chloride 100 / U U U / + Petrol U Benzene U O U + + Boracic acid 10 / Butyl acetate O U U / + Calcium chloride U + Chlorobenzene U U / + Chlorine water / + U O U + Chloroform 100 / U U U + + Chromic acid 10 O + U + U + Iron dichloride 10 O U U Acetic acid U + U + Acetic acid 80 O + U + U + Formaldehyde O + Glycerine Urea 10 / / + Tincture of iodine / + + U / + Potassium bichromate 5 / + O + U + Potassium nitrate 10 / / + Potassium perman O + / + Bluestone 10 / / + + U + Magnesium chloride 10 / U + Methylene chloride 100 U U U O / + Lactic acid O + O + Mineral oil Sodium bisulphite 10 / + U O U + Soda ash O + Sodium chloride O + Sodium sulphate 10 / Oxalic acid 40 / O U + O O Phenolic aqueous 10 U + U + / + Phosphoric acid O + U + Mercury 100 / U + Mercuric chloride 5 / + + O U + Nitric acid 65 U U U + U + Nitric acid 10 U O U + U + Hydrochloric acid 10 U + U + U U Hydrochloric acid 2 U + U + U U Carbon disulphide U U U + + Sulphuric acid U + Sulphuric acid 98 U O U O U + Hydrogen sulphide 2 / O + Soap solution Carbon tetrachloride U U O + + Trichloroethylene 100 O O U U O + Wine / O + Zinc chloride 10 / U + + = Resistant The material remains fully resistant to the medium or is only minimally affected. The effect of pressure and temperature changes on the materials must be taken into account. O = Resistant with limitations The material is affected by the medium; sealing compounds well up. If concentration, pressure, temperature, durability and other influential factors are restricted, application may be possible. U = Non-resistant The material may not be used in the specified medium or at the given temperature, unless under very clearly defined preconditions. / = no data availabe Sensors 237
7 FAX Order form and questionnaire for magnetic float switches Standard tube diameter 12 mm Page from Date: Adress: Sender: Company: Bernstein AG Tieloser Weg 6 D Porta Westfalica Phone: +49-(0)5 71/ Fax: +49-(0)5 71/ Customer No.: Contact: Department: Street: Town: Phone: Fax: Type Position O Enquiry O Order pieces pieces Operational environment: Pressure: bar Temperature: C (fulling level) Container dimens.: mm Medium: Cable length: m Separate contact type O Mounting options: O from above O O from below lateral Other comments: S = Normally-open Ö = Normally-closed U = change over 238
Diaphragm Liquid Pumps
Diaphragm Liquid Pumps MODELS 52 F F 12 FP 21 52 F F 12 FP 21 FEATURES Self priming Dry running Oil-less, non lubricated Suitable for continuous operation Chemical resistent pump materials for aggressive
CORROSION DATA GUIDE
CORROSION DATA GUIDE This guide was developed from general corrosion literature, standard references and field experiences. Recommendations for corrosive service are given to assist the user in making
Chemical Resistance and Material Selection Guide for Drum Pumps
esistance and Material Selection Guide for Drum Pumps The information in the following guide lists the corrosion resistance of four materials used in the drum pump outer tubes. Additional wetted materials
TECHNICAL DATASHEET. Weatherproof LED luminaire STRONGERTUBE. 100,000 h product life IK C. Applications recommendation. General characteristics
TECHNICAL DATASHEET IK 10 Frequency 0 50/60Hz Rated voltage 220 240V 650 C 100,000 h product life +35 C -25 C G2 B 6500-840 ET PMMA General characteristics The new weather-proof luminaire has been developed
Chemical Resistance and Material Selection Guide for FTI Drum Pumps
esistance and Material Selection Guide for FTI Drum Pumps The information in the following guide lists the corrosion resistance of four materials used in FTI drum pump outer tubes. Additional wetted materials
TECHNICAL DATASHEET. Weatherproof LED luminaire STRONGERTUBE. 100,000 h product life IK C. Applications recommendation. General characteristics
100,000 h product life Frequency 0 50/60Hz 650 C IK 10 Rated voltage 220 240V +35 C -25 C G2 B 6500-840 ET PMMA General characteristics Applications recommendation The new weather-proof luminaire has been
indicates possibility of environmental stress cracking
CHEMCAL RESSTANCE CHART This Resistance chart is to be used as a guide to assist you in determining the suitability of LLDPE Rotathene for storing the chemical indicated. Storage is a critical application
Diaphragm Liquid Pumps
Diaphragm Liquid Pumps Series 52 F F 12 FP 21 52 F F 12 FP 21 Product Features Self priming Dry running Oil-less, non lubricated Suitable for continuous operation (motor shaft should be horizontal) Chemical
TECHNICAL DATASHEET. Weatherproof LED luminaire DUNA FLEX High Efficiency 8,000lm. 70,000 h product life IK C. Applications recommendation
70,000 h product life Frequency 0 50/60Hz 650 C IK 03 Rated voltage 220 240V +35 C -25 C DHE 1.5 82-840 ET SMC DPM IX CG General characteristics Applications recommendation LED module luminaire manufactured
Plastic pipe clamp CLIC TOP 8 64
Plastic pipe clamp CLIC TOP 8 64 Technical data sheet 12/2014 1 1. Product description The most efficient mounting system for pipes, cables and many other applications. Diameter dimensions ranging from
technical information
CHEMICAL RESISTANCE TABLES Version: 19-08-10 ADD Resins and Chemicals (Pty) Ltd Distribute a comprehensive range of unsaturated polyester resins for chemical resistance applications. The resins recommended
Temperature Sensing Standard Thermowells for Industrial Applications. Velocity Ratings of Wells. View Product
Standard for Industrial Applications Well failures, in most cases, are not due to the effects of pressure and temperature. The calculations necessary to provide adequate strength under given conditions
Technical data sheet
Technical data sheet 8 64 mm 1. Manufacturer Egli, Fischer & Co. Ltd. Gotthardstrasse 6 P.O. Box 8022 Zurich Switzerland 2. Product description One-piece, self locking plastic pipe clamp for the exterior
Applications / Compatibility Guide
Applications / Compatibility Guide Hunsworth Lane, Cleckheaton, West Yorkshire. BD19 3UJ Telephone: +44 1274 878787 Fax: +44 1274 862588 e.mail: smith@novussealing.com Website: www.novussealing.com If
4 SPRINGS 6 SPRINGS 8 SPRINGS 10 SPRINGS 12 SPRINGS 14 SPRINGS
Sheet No.: 4.201 Rev. A INSTALLATION OF SPRINGS OF P-SERIES ACTUATOR P 4 SPRINGS 6 SPRINGS 8 SPRINGS SPRING 10 SPRINGS 12 SPRINGS 14 SPRINGS Sheet No.: 4.202 Rev. A INSTALLATION OF SPRINGS OF E-SERIES
Chemical Resistance Table Polypropylene
Description: Polypropylene Chemical Resistance Table Polypropylene Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in
PRODUCT DATA SHEET (rev. 2.12/2017)
PRODUCT DATA SHEET (rev. 2.12/2017) 1. Name PE-RT/EVOH/PE-RT floor-heating multilayer pipe 2. Product features and intended use The multilayer pipe PE-RT/EVOH/PE-RT is designed and manufactured by Capricorn
Chemical Resistance Table KPC Polypropylene
Scope and Field Application This document establishes a provisional classification of the chemical resistance of polypropylene with respect to about 180 fluids. It is intended to provide general guidelines
LIGHTBLOCKS BOARD. stress cracking. chemical
e info@ chemical stress cracking LIGHTBLOCKS BOARD Contents This brochure provides a summary of the chemical behavior of our semifinished product groups by listing the chemical substances ed on these materials
PRODUCT DATA SHEET PDS A133_E. Metric thread M 1.5 pitch CEI EN CEI EN Pg thread DIN Dimensions DIN
Metric thread M 1.5 pitch CEI EN 60423 CEI EN 50262 Ref. Hole min-max Spanner Spanner min-max Quantity Nickel Head Body Box/Bag Plated Brass 2003M1221N M12x1,5 12,5 4-6 13 14 5 13-16 500/100 2003M1621N
Preferred. Steel, Epoxy Powder Coated. Satisfactory. Limited
Corrosion Resistance We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical corrosion. All materials are affected by corrosion in some manner.
Surface Protective Systems
Surface Protective Systems Technical information TI 374 Expansion joint filler, especially suitable for the corrosion protection Base Polyurethane Material Group Mortars, Jointing Materials Description
Polystone G (HDPE) Polystone P (Polypropylene) Shaping the Future through Innovation.
Polystone G (HDPE) Polystone P (Polypropylene) Shaping the Future through Innovation. Innovation. 11/2011 Competence. Quality. Semi-Finished Thermoplastics Röchling A World Leader in Engineering Plastics
PRODUCT DATA SHEET (rev. 2.12/2017)
PRODUCT DATA SHEET (rev. 2.12/2017) 1. Name PE-RT/EVOH/PE-RT installation multilayer pipe 2. Product features and intended use The multilayer pipe PE-RT/EVOH/PE-RT is designed and manufactured by Capricorn
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Resco s ChemLab is the ultimate laboratory benchtop for high chemical use. The Electro Beam Cured (EBC) surface, gives it an extra stain resistance and high hygiene, making it the
Plastic Extruders Limited Russell Gardens, Wickford, Essex,SS11 8DN England. TEL: +44 (0) FAX: +44 (0)
Plastic Extruders Limited Russell Gardens, Wickford, Essex,SS11 8DN England. TEL: +44 (0)1268 571116 FAX: +44 (0)1268 560027 sales@plastex.co.uk THE CHEMICAL RESISTANCE OF P.V.C. November 2003 Introduction
MODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON
MODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON 2639-95 C 6/18/14 2 1/2"-12" R/S VALVE OS&Y EXPLODED VIEW ITEM NO. DESCRIPTION Material QTY. 1 Follower Gland Gray Iron
ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES
1 ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES The main advantages and improvements in drainage networks that will be obtained by the use of PE MAGNUM pipes, in comparison to PVC pipes are: 1.
PPH Rod Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: Polypropylene Homopolymer PPH is light weight (SG 0.91) has improved chemicalresistance, stiffness, improved higher working temperature compared to PPC (0 C to
LDPE Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: Low Density Polyethylene LDPE is a lightweight material (SG 0.92) with low water absorption and good chemical resistance. LDPE is renowned for its low stiffness
Polypropylene Chemical Resistance Table Polypropylene
ART 006 11.07.2001 Ed. 4 Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in use in various countries, derived from both
EPIC J3413. Uniclass L L2123. CI/SfB (52.5) In6. The most advanced drainage system of its kind. ACO Qmax. Hydraulics and Legislation
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) In6 The most advanced drainage system of its kind ACO max Hydraulics and Legislation ACO max System HYRAULICS & LEGISLATION Overview Channel drainage hydraulics
Surface drainage systems introduction. Area (m2) Fig. 4 31,5 28,5 25,5 22,5 19,5 16,5 13,5 10,5 7,5 4,5 1,5
31,5 30 125 mm/hours 100 mm/hours 75 mm/hours 28,5 27 25,5 24 22,5 50 mm/hours 40 mm/hours 21 19,5 18 16,5 15 13,5 12 7. catch BaSinS covers GrillS 8. rainwater GullieS Area (m2) Total discharge qt (l/sec)
Superlit GRP Pipe. Technical Guide W1.7
Scan for more information Superlit GRP Pipe Technical Guide W1.7 For over 50 years Superlit have successfully serviced the Water and Waste industry, manufacturing high quality Fiberglass pipes and fittings
PPH Pressed and Planed Sheet
Product information Product full identity: Polypropylene Homopolymer PPH is light weight (SG 0.91) has improved chemicalresistance, stiffness, improved higher working temperature compared to PPC (0 C to
abcdef EMV/S/Kseries Vertical Multistage Centrifugal Pumps where innovation f l ow s SNG
abcdef where innovation f l ow s SNG 6869 Vertical Multistage Centrifugal Pumps EMV/S/Kseries www.euroflopumps.com Coding System e.g. EMV 3-1 F A T XXXX XX-XXX X XX XXX X Series EMV EMVS EMVK - Cast iron
Technical Guide WM1.7. hygrade.co.nz 0800 HYGRADE ( ) Applications. Product Attributes. Approvals/Standards. Quality.
Technical Guide WM1.7 Superlit GRP Pipe For over 50 years Superlit have successfully serviced the Water & Waste industry, manufacturing high quality Fiberglass pipes & fittings for a wide range of uses.
Z-Core Piping Systems Competitive Materials Installed Cost Comparison
Z-Core Piping Systems Competitive Materials Installed Cost Comparison www.fgspipe.com fgspipe@nov.com INTRODUCTION Selecting the right pipe for your corrosive service can result in a system that outlasts
PE300 Sheet Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
Ocal. PVC-Coated Products. Products for corrosive environments
Ocal TM Products for corrosive environments Polymeric Fixtures for Class I, Zone 2, Groups IIC, IIB, IIA, Wet and Marine Locations Hazlux 1 HID, Mogul Base, 50-175W Enclosed and gasketed Polymeric (fiberglass-reinforced
PE300 Rod Extruded. Product information. Applications. This document contains. Product full identity: Properties.
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
Conductive Leakage detectors of the LeakConductive range. with electrode and relay
Conductive Leakage detectors of the LeakConductive range with electrode and relay MEL 6 and MEL 6-Z10 conductive mat electrodes Conductive mat electrodes are designed to signal via a connected conductive
DMR Srl Telefono:
Anti-Slip ANTI SLIP PRODUCT Product Specification SPECIFICATION Identification of the Product & the Company Product Name: Company Name: Anti-Slip Category - Glass Reinforced Plastic (GRP) safe access products
Stainless Steel and Metal Hose (Section III)
Stainless and Metal Hose (Section III) Part No. Description Page No. SS3161 Single Braid Stainless Hose 2 SS3162 Double Braid Stainless Hose 3 Chlorine Transfer Hose 4 Correction Factors for Elevated Temperatures
SENSORS LIGHT CURTAINS SG-IP69K SERIES SAFETY ACCESSORIES FEATURES APPLICATIONS CARATTERISTICHE
LIGHT CURTAINS SAFETY ACCESSORIES SG-IP69K SERIES The SG-IP69K accessory, is a PMMA acrylic tube used to protect and seal the safety light curtains of SG2, SG4 and SG BODY COMPACT series. Thanks to SG-
W A T L O W. Application. Over 704 C (1300 F) Carburizing hardening. Inconel 600, Type 446 SS. Hot blast main Inconel 600 Stove trunk Inconel 600
Inconel and Monel are registered trademarks of the Special Metals Corporation. Hexoloy is a registered trademark of Carborundum Company. Hastelloy C is a registered trademark of Haynes International. Heat
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS SeamTek Type 4 Epoxy Quartz Flooring System (1/8 ) Section 09700 800-638-9874 www.lspinc.com Part 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract,
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 800-638-9874 www.lspinc.com Part 1 - GENERAL SeamTek Type 3 Healthcare Epoxy Quartz Flooring System (3/16 ) Section 09700 1.01 RELATED DOCUMENTS A. Drawings and general provisions
SURFACE VEIL CONTINUOUS GLASS ROVING. Color
Pultruded Fiberglass Grating Pultrusion technology is a manufacturing process which produces uniform cross-sectionally shaped glassfiber reinforced polymer composite profiles. These profiles are designed
TECHNICAL SPECIFICATIONS
Part 1 - GENERAL TECHNICAL SPECIFICATIONS SeamTek Type 3 Epoxy Quartz Flooring System (3/16 ) Section 09700 800-638-9874 www lspinc com 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract,
PE300 Profiles Extruded
Product information Product full identity: High Density Polyethylene PE300 is a lightweight (SG 0.96) and strong material that has excellent sliding properties, good chemical resistance, low moisture absorption
Acetal Co-Polymer Coloured Rod - Extruded
Product information Product full identity: Polyoxymethethylene Copolymer Extruded Acetal C offers high stiffness, tensile strength and surface hardness. Acetal C is more resistant against hydrolysis, strong
Standards of Ethanol in Water. Analytical Volumetric Solutions
Standards of Ethanol in Water These standards are intented for use as reference solutions for alcohol content measuring instruments. They are prepared using organic-free water, and the certified concentrations
Manufacturers declaration of performance
Trespa International B.V. P.O. Box 110, 6000 AC Weert Wetering 20, 6002 SM Weert, The Netherlands Tel.: 31 (0) 495 458 358, Fax: 31 (0) 495 458 570 www.trespa.com Manufacturers declaration of performance
SIGRAFLEX Gaskets P Resistance to Chemical Media
SIGRAFLEX Gaskets P Resistance to Chemical Media Chemical Resistance of SIGRAFLEX Flexible Graphite, Stainless Steel and PTFE A distinction is made between four cases: 1. Resistant 2. Not resistant 3.
General applications Chemical plant, oil refinery, power plant, steam, Dowtherm, fused alkali, fuel oil and gas
KTM Gratite Seat i-temp Ball Valves KTM s Gratite seat ball valve not only operates across an impressive range of temperatures, from -29 C to 500 C, it also boasts outstanding performance and a reliability,
PET ZX Sheet & Rod - Extruded
Product information Product full identity: Polyethylene terephtalate lubricant PET-ZX has a self-lubricating additive to offer outstanding wear resistance, lower coefficient of friction as well as high
Polystone M (UHMW-PE) Shaping the Future through Innovation.
(UHMW-PE) Shaping the Future through Innovation. Innovation. 11/2015 Competence. Quality. Semi-Finished Thermoplastics Röchling A World Leader in Engineering Plastics Röchling World Leader in Engineering
Rigid PVC Pipes (upvc Rigid Pipes)
Rigid PVC Pipes (upvc Rigid Pipes) Advantages of PVC Pipes PVC due to non-corrosive in nature and unaffected by chemicals, electrolytic and ironic corrosion can stay for very long time than other pipes
Diaphragm Liquid Pumps
Diaphragm Liquid Pumps MODELS 52 F F 12 FP 21 52 F F 12 FP 21 FEATURES Self priming Dry running Oil-less, non lubricated Suitable for continuous operation Chemical resistent pump materials for aggressive
Thermowells General Specifications
Thermowells General Specifications Material - The Longevity Factor In general, the thermowell material chosen for the installation is governed mainly by the corrosion conditions the well will face. Recommended
Hammer-Capsule CHEMICAL PRODUCT DESCRIPTION SUGGESTED SPECIFICATION APPROVALS AND LISTINGS HAMMER CAPSULE SPECIFICATIONS
22 INSTALLATION OF ANCHORS OVERHEAD Prior to installing adhesive anchors overhead or in walls, consult with the governing building authority to determine the requirements for fire safety guidelines. The
T-Type insulating enclosures
characteristics T-Type insulating enclosures Alongside the wide range of traditional metallic enclosures for ILE multipole connectors, there is now available a new series of enclosures in self-extinguishing
Material Chemical Resistances
Resistances for plastic chains and modular belt Resistances Agent up to 65 C Polyamide Steel Stainless Steel Aisi 304 Stainless Steel Aisi 430 LF MX UHMW PE PP/PPX for plastic chains and modular belt Acetone
Q1. From the following list of substances, choose the substances which meet the description given in parts (i) to (v) below :
Questions:- Q1. From the following list of substances, choose the substances which meet the description given in parts (i) to (v) below : Ammonium chloride, ammonium nitrate, chlorine, dilute hydrochloric
Chemical resistance of Saniclad PVC products
resistance of Saniclad PVC products The table that appears in the following pages lists the resistance of SAI CLAD PVC sheets to a number of commonly encountered chemicals and other corrosive media at
Metallic Systems Accessories - Lock Nuts
ccessories - Lock Nuts Lock nuts, for securing threaded fittings into knocknuts and fixing holes Features Female threaded locknut, made from nickel plated brass Degree of mechanical protection is high
Corrosion Resistant Chain Products. Stainless Steel Silver Shield CR Series Nickel-Plated
3 Corrosion Resistant Chain Products Stainless Steel Silver Shield CR Series Nickel-Plated 2 Drives Corrosion and Moisture Resistant Chains Drives, LLC headquartered, with manufacturing facilities in Fulton,
L-DENS 7000 DENSITY SENSOR SERIES
L-DENS 7000 DENSITY SENSOR SERIES Member of the New Generation of Concentration Measurement E04IV001EN-E New Generation Configuration Sensor with Evaluation Unit Electronics Housing + Sensor Electronics
Polycarbonate Sheet Extruded
Product information Product full identity: Polycarbonate PC has excellent optical properties and a high gloss surface. Easy to fabricate PC shows exceptional performance with a wide operating temperature
PE500 Sheet Pressed & Planed
Product information Product full identity: High Molecular Weight Polyethylene PE500 is a versatile, food compliant material available in a wide range of colours. It s unique properties include a low coefficient
Registered Office Warehouses Contact
Unichimica is market leader in the distribution of chemically-based products and concentrates on the distribution throughout the regions of Veneto, Trentino Alto Adige, Friuli Venezia Giulia and Emilia
Atlas Minerals & Chemicals, Inc. FURATHANE MORTAR. 5-33PI ( ) Supersedes 5-33PI (7-02) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA A SHEET 5-33PI (6-03 2 ) Supersedes 5-33PI (7-02) FURATHANE MORTAR DESCRIPTION FURATHANE MORTAR is a 100% carbon filled, specially formulated furan mortar for chemical
Material Chemical Resistances
Resistances Resistances Resistances Agent up to 65 C Polyamide Steel Stainless Steel Aisi 304 Stainless Steel Aisi 430 LF MK MX UHMW PE PP/PPX Acetone G U G G G G A G G Acetic acid (max 5%) U U G U U U
Industrial Elastomer Coatings
Industrial Elastomer Coatings Rubber Coatings a safeguard against corrosions and abrasion Rubber is chemically resistant to most corrosive liquids, hydrocarbon, gases, salt water, ozone and UV light, commonly
MasterSeal CR 171 DESCRIPTION FIELD OF APPLICATION FEATURES AND BENEFITS. APPLICATION METHOD (a) Surface Preparation.
DESCRIPTION is a pourable chemical-resistant two-component polysulphide based joint sealant with hardening system based on manganese oxide. FIELD OF APPLICATION is used for sealing horizontal floor joints
Perfection in Liquid Handling HIGHEST RELIABILITY IN DISPENSING
Perfection in Liquid Handling HIGHEST RELIABILITY IN DISPENSING 13 VITLAB Dispenser line: genius 2, simplex 2, and TA 2 VITLAB genius 2 and simplex 2 bottle-top dispensers are a family of instruments with
MasterSeal CR 170 DESCRIPTION FIELD OF APPLICATION FEATURES AND BENEFITS. APPLICATION METHOD (a) Surface Preparation.
DESCRIPTION is a non-sagging chemical-resistant two-component polysulphide based joint sealant with hardening system based on manganese oxide. FIELD OF APPLICATION is used for sealing wall joints and inclined
Chem-Stud CHEMICAL SPIN TYPE CAPSULE ADHESIVE PRODUCT DESCRIPTION CHEM-STUD ADHESIVE PROPERTIES
192 Chem-Stud SPIN TYPE CAPSULE ADHESIVE BASE MATERIAL Solid Concrete SIZE RANGE 3" to 1-1" Anchor Rod, No. 3 to No.10 Reinforcing Bar ANCHOR MATERIAL Ester Based Resin PRODUCT DESCRIPTION The Chem-Stud
Company Introduction.
Company Introduction www.notedome.com Our Production Facility Utilising a modular approach to our production facility, we planned to maximise our flexibility by having a selection of reaction/blending
SERIES 7700 Butterfly Valve
SERIES 00 AN-2- Series 00 butterfly valve with 0 position lever lock Used in commercial grooved-end piping systems 2" through 2". The uniqueness of the Series 00 ruvlok begins with the spherical bore of
DKE / DZE / DBAE Conductive Leakage detectors of the LeakConductive range. with electrode and relay
DKE / DZE / DBAE Conductive Leakage detectors of the LeakConductive range with electrode and relay E-1 31-1-0 Model overview 31-1-1 Page The conductive measuring principle 31-1-3 Examples of electrically
Kufalit. Bearing material from thermosetting plastic.
Kufalit Bearing material from thermosetting plastic. Properties of Kufalit: Good chemical resistance against acid, caustic, salts and other chemical attacks. By using graphite as filler, Kufalit is self
ICSE-Science 2 (Chemistry) 1996
ICSE-Science 2 (Chemistry) 1996 Answers to this Paper must be written on the paper provided separately. You will not be allowed to write during the first 15 minutes. This time is to be spent in reading
Obstructed or Non-Vertical Oriented Toxic Air Pollutant Permitting Emission Rates (TPER) Toxicants
15A NCAC 02Q.0711 EMISSION RATES REQUIRING A PERMIT (a) A permit to emit toxic air pollutants shall be required for any facility, excluding sources exempt from evaluation by 15A NCAC 02Q.0702, if one or
Mass flow measurement without media contact
mass flow, density and concentration measurement without media contact FLEXIM includes an extensive and continuously growing database for the non-invasive determination of mass flow and concentration of
AP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2009-2010 Other 1. Pure solid phosphorus (white form) is burned in air. (2002) 2. Sulfur dioxide gas is bubbled into distilled water. (2001) 3. A drop of potassium
Power-Bond CHEMICAL PUMP & DUAL CARTRIDGE PRODUCT DESCRIPTION PRODUCT DESCRIPTION MIXING GUIDELINES POWER-BOND MATERIAL PROPERTIES
184 Power-Bond PUMP & DUAL CARTRIDGE BASE MATERIAL Solid Concrete, Block, Brick, Stone or Masonry SIZE RANGE 3" to Anchor Rod. No. 3 to No. 8 Reinforcing Bar Upon completion of mixing, pull the plunger
A flexible duct connector is an airtight, flexible joint consisting of a fabric that is secured to sheet metal on both sides.
TechTips VOLUME 4 Flexible Duct Connector Tech Tip Figure 1 What are flexible duct connectors? A flexible duct connector is an airtight, flexible joint consisting of a fabric that is secured to sheet metal
Profiles in thermoplastics rubber TPeRX
Profiles in thermoplastics rubber TPeRX 30 22 Rubber Technology Edge protectors Available on Stock Sidesight 60 38 38 Elastomer joint with adhesive Colour: yellow Packaging: 10 x 2 meters Reference: F1123
Title III Section 313 Release Reporting Guidance
United States Environmental Protection Agency Office of Pesticides and Toxic Substances Title III Section 313 Release Reporting Guidance EPA 560/4-88-004e January 1988 Estimating Chemical Releases From
Atlas Minerals & Chemicals, Inc. CHEMESTER MORTAR. 5-42PI ( ) Supersedes 5-42PI (2-02) & 5-44PI (2-02) PHYSICAL PROPERTIES
Atlas Minerals & Chemicals, Inc. DATA A SHEET 5-42PI (6-03 2 ) Supersedes 5-42PI (2-02) & 5-44PI (2-02) CHEMESTER MORTAR DESCRIPTION CHEMESTER MORTAR is an epoxy novolac based vinyl ester resin mortar
CHEMICALS ALCOHOLS BASES
ACIDS Acetic Acid Acetic Acid Glacial Acetic Acid, Acrylic Acid Aqua Regia Benzene Sulfonic Acid Benzoic Acid Boric Acid Carbolic Acid Carbonic Acid Chloroacetic Acid Chlorosulfonic Acid D D D Chromic
Properties of standard Bal Spring canted coil spring materials
Custom components that drive tomorrow s technologies. Properties standard Bal Spring canted coil spring materials Technical Report TR-9 (Rev. Q; 10-19-17) (100-44) 19650 Pauling Foothill Ranch, CA USA
Guide to Safe Handling & Storage of Hazardous Materials
Guide to Safe Handling & Storage of Hazardous Materials I. ACIDS VI. PYROPHORICS II. BASES (CAUSTICS) VII. PEROXIDE FORMING CHEMICALS III. FLAMMABLES VIII. TOXIC CHEMICALS IV. OXIDIZERS IX. CARCINOGENS
Super Erecta Wall Mount Technical Data T10.40 TIM CAMPBELL
Wilkes-Barre, PA 18705 www.metro.com Super Erecta Wall Mount Technical Data T10.40 Finish Temp. Abrasion Chip Res. Nickel Chrome Brite Metroseal II Stainless Designer Very Good Very Good Application
DELIVER TO END USER AFTER INSTALLATION IS COMPLETED
PRODOME TM SKYLIGHT DELIVER TO END USER AFTER INSTALLATION IS COMPLETED RECOMMENDED TOOLS PARTS LIST 1. #12 x 1-1/2 Hex Washer Head Screw (Other sizes and types available) 2. (Appearance may vary depending
CHEMCAST is the only high quality acrylic sheet that can provide you with short runs capability and color selection to fit your specific needs.
INTRODUCTION What makes CHEMCAST acrylic sheet notably different is: CHEMCAST is the only high quality acrylic sheet that can provide you with short runs capability and color selection to fit your specific
Because our products are used in so many different applications and because of the individual factors involved,
Universal Belting Resource Chemical Resistance Overview. Chemical Resistance Overview Remarks / Preconditions The properties indicated are not guaranteed. Because our products are used in so many different