Born from fire, made to endure WEAR RESISTANT HEAVY PLATES

Size: px
Start display at page:

Download "Born from fire, made to endure WEAR RESISTANT HEAVY PLATES"

Transcription

1 Born from fire, made to endure WEAR RESISTANT HEAVY PLATES

2 Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster and rolls it into quality flat rolled steel products. The company is specialised for the production of flat steel products and belongs among most important global suppliers of heavy plates. Besides carbon steel, Acroni produces also stainless and electrical steel. Constant development, improvement of processes and materials along with the introduction of a quality assurance system in accordance with ISO 9001, environmental management systems in accordance with ISO and occupational health and safety management systems in accordance with OHSAS 18001, are our guarantee for a constant quality level. Our experts are always prepared to offer customers their assistance so that the excellent properties of our steels may be exploited to their full advantage and the satisfaction of the customer. Acroni is a member of SIJ SLOVENIAN STEEL GROUP. SIJ is a vertically integrated holding company, the leading steel manufacturer in Slovenia, and one of the largest stainless and special steel manufacturers in Europe. SIJ Group consists of the two largest steel companies in Slovenia (Acroni and Metal Ravne), other manufacturing and processing companies (Ravne Knives, Elektrode, SUZ), specialized service and sales centers across Europe and the USA, and companies for scrap steel collection and sales. 2

3 ACRONI`s wear resistant plates have been successfully used in abrasive environments for more than a quarter of a century. New investments in technology, continuous development and tight cooperation with our customers enable us to offer wider product range, high quality and short delivery terms. Our wear resistant plates are the material of choice for even the most demanding environments and applications. NICRODUR - extreme resistance to abrasive wear NICRODUR heavy plates are produced in hardness range from 220 to 540 HBW. Compared to non-alloyed structural steels, NICRODUR plates have higher durability which result in up to three times longer lifespan of your products. The unique combination of high hardness, high strength and good toughness improves bending, welding, machining properties and deformation level. NICRODUR is the material well suited for a wide variety of applications in which exposure to heavy wear by hard minerals and other abrasive materials is the case. Better performance at lower thickness S355 NICRODUR 400 NICRODUR 500 Thickness Up to three times longer lifespan of products NICRODUR 400 S355 Years NICROTER heat resistance in addition to abrasion resistance NICROTER 600 fine grain steel combines high resistance to mechanical wear, heat resistance up to 600 C, good weldability and machining. X 12 increasing hardness with exposure to wear The virtue of high manganese steel X12 (Hadfield steel, X120Mn12) is high wear resistance and work-hardnening effect on steel structure. With exposure to wear, hardness can be increased by three times compared to delivered condition. More than just steel higher efficiency through SIJ welding solutions Inside SIJ group we have developed special welding consumables to be used when welding Acroni's steel. Long experience in the field of welding and expertise knowledge enables us to offer more efficient welding solutions, that can increase welding performance and essentially reduce the costs of production by our clients. Born from fire, made to endure

4 Applications Bulldozers, earth moving crusher jaws, shredder plates, shovel buckets, dumptrucks, industrial trucks, lorries, CONTAINERS FOR IRON ORE, machine parts and tools for mineral extraction (mining), metal working tools cutting edges, knives, gears, bearings, loaders, buckets, slurry pipe systems, GUIDING AND SHIFTING PLATES, liner of shot blasting unit, shot blasting equipment. Chemical Composition LADLE ANALYSIS C max Si max Mn max S max P max Cr max Ni max Mo max B max NICRODUR 250 0,18 0,6 1,6 0,001 0,012 1,2 0,5 NICRODUR 300 0,22 0,6 1,6 0,003 0,012 1,3 0,5 NICRODUR 400 0,16 1,0 1,5 0,002 0,012 0,8 0,5 0,5 0,004 NICRODUR 450 0,18 1,0 1,5 0,002 0,012 0,8 0,5 0,5 0,004 NICRODUR 500 0,28 1,0 1,5 0,002 0,012 1,0 0,5 0,5 0,005 NICROTER 600 0,12 0,45 1,8 0,001 0, ,3 0,25 X12 1,3 0,4 13 0,001 0,02 0,55 0,55 0,25 4

5 Max carbon equivalent CEV = C+Mn/6+(Ni+Cu)/15+(Cr+Mo+V)/5 Grade\Thickness range 8-25mm 25-40mm Above 40mm Nicrodur 400 max 0,46 max 0,59 max 0,60 Nicrodur 450 max 0,49 max 0,59 max 0,74 Nicrodur 500 max 0,59 max 0,64 max 0,75 Hardness HBW and delivery condition Hardness (HBW) NICRODUR 250 NICRODUR 300 NICRODUR 400 NICRODUR 450 NICRODUR 500 NICROTER 600 X Min. 300HB Max. 240HB Rolled Rolled Quenched and tempered Quenched and tempered Quenched and tempered Normalized Solution annealed Typical mechanical characteristics a elevated temperatures for Nicroter 600: Temperature ( C) Rp0.2 (Mpa) Rm (Mpa) A50 (%) , ,5 Room Mechanical Properties* Yield strength (minimal) Re (MPa) Tensile strength Rm (MPa) Elongation (minimal) A 5 (%) Charpy V-Notch NICRODUR C 30J NICRODUR C 30J NICRODUR C 30J NICRODUR C 30J NICRODUR C 25J NICROTER C 27J X Typical values for 15 mm plate thickness * orientational values 5

6 Quality driven We test each plate to ensure continuous quality you can rely on. Testing and certification Brinell hardness HBW is measured according to EN ISO or EN Hardness is tested on each plate. Tests are performed in accredited inhouse testing laboratory. Inspection certificate EN 10204/3.1 is issued for each delivery. Upon agreement inspection certificate EN 10204/3.2. by independent inspection agency can be provided. Additional ultrasonic testing according to EN 10160, A/SA435 OR A/SA578 can be performed. 6

7 Dimensional range Thickness (mm) Width (mm)* Length (mm) NICRODUR NICRODUR NICRODUR NICRODUR NICRODUR NICROTER X Thickness (mm) NICRODUR 400 NICRODUR 450, NICRODUR 500 NICRODUR 250, NICRODUR 300, NICROTER 600, X12 Tolerances Upon request narrower thickness, shape, length, width and flatness tolerances as according to EN are available. Width (mm) 2500 Surface Properties According to EN /A-1. Anticorrosive primer red oxid colour upon request. Bending Bending R/t W/t Thickness Transverse Longitudinal Transverse Longitudinal Springback NICRODUR t < 20 t 20 3,0 4,5 4,0 5,0 10,0 12,0 10,0 12, NICRODUR t < 20 t 20 4,0 5,0 5,0 6,0 10,0 12,0 12,0 14, NICRODUR t < 20 t 20 5,0 7,0 6,0 8,0 12,0 16,0 14,0 18, Minimum recommended punch radius (R) and die opening width (W) for plate thickness (t) when the plate is being bent to 90 along the direction of rolling and at right angles to the direction of rolling and also the corresponding springback. 7

8 WELDING Welding solution package - increases welding efficiency by 10% SIJ group welding consumables produced by SIJ Elektrode are a perfect solution for welding Acroni wear resistant plates. Welding consumables have been carefully developed taking the caracteristics of Acroni plates into consideration. As a result, we are able to offer optimization and cost reduction of your welding process. Our welding solutions are suitable for even the most demanding industries and applications. Welding Acroni s wear resistant plates with SIJ group welding consumables has proven to be up to 10%* more efficient as by other combinations. Smooth welding process and more precise welding flow results in perfect joint welding structure. Optimal combinations of wear resistant plates and welding consumables are listed in the table on the right. * internal testing data 8

9 Welding process Welding process or procedure* Welding Welding * Welding ** Hardfacing Interlayer Welding materials / Welding process SAW Fluxes / Wires Electrodes MMAW Flux cored wires FCAW Wires GMAW, GTAW Electrodes MMAW MMAW trodes Electrodes MMAW Flux cored wires FCAW Wires GMAW, GTAW Electrodes MMAW Flux cored wires FCAW Electrodes MMAW Wires GMAW, GTAW SAW Fluxes / Wires EN Designation (EN 499, EN 757, EN 1600, EN 440, EN EN 758, EN 12071, EN 756, EN 760) SA FB 1 55 AC H5/S 3 SA FB 1 55 AC H5 E 42 4 B 32 H5 E 42 6 B 42 H5 T 46 4 M M 1 H5 T 42 4B C3 H5 / T 42 4B M3 H5 G 42 4 C/M G 3 Si1 G 46 4 C/M G 4 Si1 E 692MN2NiCrMoB42 E 692MN2NiCrMoB42 E 89AMn2NiCrMoB42 T 69 4 Mn 2Ni Cr Mo M 1 H5 T 69 6 Mn2NiCrMo B M (C)3 H5 Mn3Ni1CrMo Fe 1 Fe 2 Fe 3 Fe 8 Fe 1 Fe 7 ~Fe 3 E 307 T0-1 E 18 8 Mn B 22 G 18 8 Mn SA AF 2 54 DC/ S 18 8 Mn SIJ Elektrode Designation FBTT/EPP3 FBTT/ Filtub 132 FBTT/Filtub 138 EVB 50 EVB 55 Filtub 12M Filtub 12B VAC 60 VAC 65 EVB 75 EVB 80 EVB 100 Filtub 32M Filtub 32B MIG 75 E DUR 250 E DUR 300 E DUR 500 E DUR 400 E DUR 600 Filtub DUR 3 Filtub DUR 5 Filtub DUR 12 Filtub DUR 15/DUR16 FilCORD 307 Inox B 18/8/6 MIG/ TIG 18/8/6Si FB33/ EPP 18/8/6 SIJ Acroni Wear Resistant Plate Grade NICRODUR 250 NICRODUR 300 NICRODUR 400 NICRODUR 450 NICRODUR 500 NICROTER 600 X12 OTHER REMARKS SIGN */** WELDING PROCESS OR PROCEDURE: 1. For the combinations of NICRODUR steels with unalloyed materials type s S355 we recommend welding materials marked * 2. *Root-welding infusions (under matching) and whole welding joints, upper layer should be welded with hardfacing process 3. Root-welding infusions (under matching) with sign* are filling with sign** or hardfacing with sign** or just welding with sign* 4. For cladding or hardfacing we recommend interlayer welding materials 18/8/6, without preheating 9

10 Maximum recommended preheat temperature Maximum recommended preheat temperature [ C] NICRODUR 400 room NICRODUR 450 room NICRODUR 500 room * for thicknesses up to 13mm Data from the table is applicable to single plate thickness when welding with a heat input of 1.7kJ/mm. The consumables determine the preheating temperature if its carbon equivalent is higher than of the plate Room temperature is approx 20 C Maximum recommended interpass temperature Maximum recommended interpass temperature [ C] NICRODUR NICRODUR NICRODUR SIJ Acroni NICRODUR steels are well weldable. When welding thin plates preheating is not necessary. Preheating is recommended: At outside temperatures below 5 C, Thicknesses above 20mm for NICRODUR 250 and 300 plates, Thicknesses above 8 mm for NICRODUR 400 and 500 plates. In this cases recommended temperature of preheating during infusions should not exceed 200 C. Exceeding the temperature over 200 C is not recommended as this can cause reduction of hardness. Welding should be performed immediately after the welding edges are finished, to avoid contamination. Coated electrodes must be dried before welding. By repair welding and joint welding sharp edges should be avoided, and the first layer of weld filler material should be in thinner dimensions, to assure as low as possible energy intake. * All welding instructions are reccomendations only. 10

11 PERFORMANCE and DURABILITY in PERFECT BALANCE Stanko Ravlan, Production Manager, Ravne Knives. Industrial knives made of Acroni wear resistant steel Where extreme wear on knives and other components is required, choice of appropriate material is crucial. ACRONI's Nicrodur, viewed from the perspective of mechanical treatment, can be easily operated. Nicrodur excellent plate flatness and narrow tolerances allow us to omit surface treatment for some types of industrial knives and wear parts. We save time and money. According to our measurments the lifetime of parts, produced using Nicrodur and Nicroter is up to three times longer in comparison to other steels. To avoid abrasive wear on industrial knives and wear parts, we recommend welding on most exposed parts. Using Acroni's wear resistant plates enables us to boost the performance of our clients.«hammers (Nicrodur 500 and Nicroter 600) Shredder knives (Nicroter 600) Screens (Nicrodur 450, Nicrodur 500) Various wear parts knife holders, wear plates (Nicrodur 450, Nicrodur 500). 11

12 Acroni, d. o. o. Cesta Borisa Kidriča 44 SI-4270 Jesenice T: F: E:info@acroni.si ACRONI-NICRODUR ENG

Born from fire, made to endure NICKEL ALLOYS

Born from fire, made to endure NICKEL ALLOYS Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster

More information

Quend 700. Extra High Strength Structural Steel. Dimensions. 1 Steel description and applications. 4 Flatness, tolerances & surface properties

Quend 700. Extra High Strength Structural Steel. Dimensions. 1 Steel description and applications. 4 Flatness, tolerances & surface properties Extra High Strength Structural Steel Quend 700 1 Steel description and applications Quend 700 is extra high strength structural steel produced as quenched and tempered with a minimum yield strength of

More information

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat

More information

Steel. Relia Quality Wear Resistant Plates PROPERTIES

Steel. Relia Quality Wear Resistant Plates PROPERTIES is a range of high hardness, conventional low-alloyed martensitic steels, which obtain their hardness through intense water quenching during plate manufacturing. steel plates offer outstanding resistance

More information

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat

More information

Relia. Industeel. Relia : Quality Wear Resistant Plates PROPERTIES STANDARDS TECHNICAL CHARACTERISTICS

Relia. Industeel. Relia : Quality Wear Resistant Plates PROPERTIES STANDARDS TECHNICAL CHARACTERISTICS Industeel Relia Relia: Quality Wear Resistant Plates Relia is a range of high hardness, conventional low-alloyed martensitic steels, which obtain their hardness through intense water quenching during plate

More information

STAINLESS STEEL WELDING CONSUMABLES. Reliability, flexibility, knowledge, innovation

STAINLESS STEEL WELDING CONSUMABLES. Reliability, flexibility, knowledge, innovation STAINLESS STEEL WELDING CONSUMABLES Reliability, flexibility, knowledge, innovation 2 SIJ is a vertically integrated holding company, the leading steel manufacturer in Slovenia, and one of the largest

More information

Born from fire, made to endure MOULD STEELS TOOL STEELS FOR PLASTIC MOULDING

Born from fire, made to endure MOULD STEELS TOOL STEELS FOR PLASTIC MOULDING Born from fire, made to endure MOULD STEELS TOOL STEELS FOR PLASTIC MOULDING IN TODAY'S GLOBAL PRODUCTION OF PLASTIC PRODUCTS THERE ARE DIFFERENT TECHNOLOGICAL PROCESSES, AMONG WHICH THEY ARE THE MOST

More information

IMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %):

IMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %): IMPACT Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR IMPACT is a wear resistant steel with a nominal hardness of 340 HBW in delivery condition. DILLIDUR IMPACT is not a constructional

More information

High-strength thermomechanically rolled fine-grain steels. Technical terms of delivery. voestalpine Grobblech GmbH

High-strength thermomechanically rolled fine-grain steels. Technical terms of delivery. voestalpine Grobblech GmbH High-strength thermomechanically rolled fine-grain steels Technical terms of delivery voestalpine Grobblech GmbH www.voestalpine.com/grobblech High-strength thermomechanically rolled fine-grain steels

More information

High-strength quenched and tempered fine-grained steels. Technical terms of delivery for heavy plates

High-strength quenched and tempered fine-grained steels. Technical terms of delivery for heavy plates High-strength quenched and tempered fine-grained steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech High-strength quenched and tempered fine-grained

More information

Chemical composition For the ladle analysis, the following limiting values in % are applicable: C Si Mn P S

Chemical composition For the ladle analysis, the following limiting values in % are applicable: C Si Mn P S 500 Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR 500 is a wear resistant steel with a nominal hardness of 500 HBW in delivery condition ex works. DILLIDUR 500 is preferentially

More information

APPLICATION Swebor Wear plates are designed for use in construction, mining, agricultural machinery and other equipment. GRADE C Si MN P S Cr B

APPLICATION Swebor Wear plates are designed for use in construction, mining, agricultural machinery and other equipment. GRADE C Si MN P S Cr B WEAR PLATES REFLECTING THE MINDSET OF PEOPLE WHO MAKE IT DATASHEET MATERIAL The Swebor Wear plates family is both hard and tough, yet easily formable and weldable. Wear plates from Swebor have a unique

More information

Hot rolled Steel Plates, Sheets and Coils

Hot rolled Steel Plates, Sheets and Coils Hot rolled Steel Plates, Sheets and Coils Steels resistant to wear and surface pressure AR Hardened steel resistant to abrasive wear cause by rolling contact and high surface pressure can be used to signiþ

More information

Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 550F

Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 550F ArcelorMittal USA Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 55F Introduction HARDWEAR, a line of premium abrasion-resistant plate steels, is available in four grades

More information

High strength fine grained structural steel. Quenched and tempered. Product description. 890 a product brand of Dillinger 1/6

High strength fine grained structural steel. Quenched and tempered. Product description. 890 a product brand of Dillinger 1/6 890 High strength fine grained structural steel Quenched and tempered Material data sheet, edition April 2016 1 DILLIMAX 890 is a high strength quenched and tempered, fine grained structural steel with

More information

High strength fine grained structural steel. Quenched and tempered. Product description. 965 a product brand of Dillinger 1/6

High strength fine grained structural steel. Quenched and tempered. Product description. 965 a product brand of Dillinger 1/6 965 High strength fine grained structural steel Quenched and tempered Material data sheet, edition April 2016 1 DILLIMAX 965 is a high strength quenched and tempered, fine grained structural steel with

More information

High-strength and ultra-highstrength. rolled fine-grained steels. Technical terms of delivery for heavy plates

High-strength and ultra-highstrength. rolled fine-grained steels. Technical terms of delivery for heavy plates High-strength and ultra-highstrength thermomechanically rolled fine-grained steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech High-strength and

More information

DEMAND MORE FROM YOUR ABRASION RESISTANT STEEL

DEMAND MORE FROM YOUR ABRASION RESISTANT STEEL DEMAND MORE FROM YOUR ABRASION RESISTANT STEEL ABRASION RESISTANT STEEL FOR DEMANDING PRODUCTS Raex abrasion resistant steel is designed to withstand even the most demanding conditions, where steel structures

More information

SIJ Ravne Systems is a member of SIJ Slovenian Steel Group.

SIJ Ravne Systems is a member of SIJ Slovenian Steel Group. FORGED ROLLS The SIJ Group is the largest Slovenian vertically integrated Slovenian metallurgical Group and one of the largest producers of stainless and special steels in Europe. The SIJ Group consists

More information

Far-reaching efficiency.

Far-reaching efficiency. Steel Far-reaching efficiency. The new XABO 1300. Achieving new heights in lightweight heavy-duty construction for special vehicles. With a minimum yield strength of 1,300 megapascals, the quenched and

More information

Content. perform. Brief profile. Product information for high-strength thermomechanically hot-rolled strip and cut-to-length plate

Content. perform. Brief profile. Product information for high-strength thermomechanically hot-rolled strip and cut-to-length plate Steel perform Product information for high-strength thermomechanically hot-rolled strip and cut-to-length plate Issue: January 22, 2019, version 0 / WB 660 Brief profile Outstanding surface quality Bending

More information

SIQUAL QUALITY STEEL. Quality steels

SIQUAL QUALITY STEEL. Quality steels SIQUAL QUALITY STEEL Quality steels INCREASE YOUR PRODUCT S LIFE SPAN The highest steel quality, based on world class production equipment and more than 400 years of experience in steel making DECREASE

More information

Comparison of BS and BS EN for steel materials

Comparison of BS and BS EN for steel materials Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of

More information

FSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates

FSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates FSection F HIGH STRENGTH LOW ALLOY STEELS HEAT TREATED CONSTRUCTIONAL ALLOY STEELS ABRASION RESISTING STEELS HIGH STRENGTH LOW ALLOY STEELS... 2-3 Sheets and Plates HEAT TREATED CONSTRUCTIONAL ALLOY STEELS...

More information

Weldable fine grained structural steel, thermomechanically rolled

Weldable fine grained structural steel, thermomechanically rolled 460 Weldable fine grained structural steel, thermomechanically rolled Material data sheet, edition September 2018 1 DI-MC 460 is a thermomechanically rolled, fine grained structural steel with minimum

More information

Wear-resistant steels. with best workability. voestalpine Grobblech GmbH

Wear-resistant steels. with best workability. voestalpine Grobblech GmbH Wear-resistant steels with best workability voestalpine Grobblech GmbH www.voestalpine.com/grobblech High hardness. Ultra-high wear resistance. Wear-resistant steels with excellent processing properties.

More information

Relia. Minimum wear, maximum payload

Relia. Minimum wear, maximum payload Relia Minimum wear, maximum payload Minimum wear, maximum payload Quality wear-resistant steels Relia is ArcelorMittal s range of high hardness, low-alloyed martensitic steels. The hardness of Relia grades

More information

HARDFACING ELECTRODES

HARDFACING ELECTRODES HARDFACING ELECTRODES UTOP 38.. K1 UTOP 43.. K2 UTOP 45.. K3 UTOP 52.. K4 UTOP 55.. K5 TOOLDUR... K6 E DUR 250... K7 E DUR 300 K8 E DUR 400... K9 E DUR 500 K10 E DUR 600 K11 E DUR 60R. K12 E DUR 600Si..

More information

SUPERIOR SOLUTIONS MADE OF WEAR-RESISTANT STEEL

SUPERIOR SOLUTIONS MADE OF WEAR-RESISTANT STEEL SUPERIOR SOLUTIONS MADE OF WEAR-RESISTANT STEEL Martin Klein, Materials specialist For the machinery industry voestalpine Steel Division www.voestalpine.com/durostat Wear-resistant steel SUPERIOR SOLU-

More information

SANDVIK 11R51 STRIP STEEL

SANDVIK 11R51 STRIP STEEL SANDVIK 11R51 STRIP STEEL DATASHEET Sandvik 11R51 is an austenitic stainless steel with excellent spring properties that in most cases fulfill demands regarding corrosion resistance, mechanical strength,

More information

STULZ-SICKLES STEEL COMPANY

STULZ-SICKLES STEEL COMPANY STULZ-SICKLES STEEL COMPANY SINCE 1916 Providing Years of Wear Resistant Service to the Railroad Industry Railroad ELIZABETH, NEW JERSEY COLTON, CALIFORNIA 800-351-1776 800-572-5809 www.stulzsicklessteel.com

More information

Weldable fine-grained structural steel, thermomechanically rolled

Weldable fine-grained structural steel, thermomechanically rolled 460 Weldable fine-grained structural steel, thermomechanically rolled Material data sheet, edition April 2016 1 DI-MC 460 is a thermomechanically rolled, fine-grained structural steel with minimum yield

More information

RQT technical guide High strength quenched and tempered structural steel.

RQT technical guide High strength quenched and tempered structural steel. RQT technical guide High strength quenched and tempered structural steel. Contents 3 About RQT 3 Tata Steel 4 RQT data 5 RQT 501 dimensions 6 RQT 601 and RQT 701 dimensions 7 RQT 901 dimensions 8 Fabrication

More information

Weldable fine-grained structural steel, thermomechanically rolled

Weldable fine-grained structural steel, thermomechanically rolled 355 Weldable fine-grained structural steel, thermomechanically rolled Material data sheet, edition April 2016 1 DI-MC 355 is a thermomechanically rolled, fine-grained structural steel with minimum yield

More information

SAFDUR 800 E. MMA Electrodes Hardfacing

SAFDUR 800 E. MMA Electrodes Hardfacing SAFDUR 800 E SAFDUR 800 E is a basic-graphite coated high-efficiency MMA electrode with ~200% metal recovery depositing a hyper-eutectic chromium hard alloy with special alloying elements. Specially developed

More information

EAM :2003/05 Revision 01 21/10/2016

EAM :2003/05 Revision 01 21/10/2016 European Approval for Materials Data Sheet EAM-0879-02 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described

More information

Stronger Steels for Stronger Customers

Stronger Steels for Stronger Customers Stronger Steels for Stronger Customers Advanced High Strength Steels and More 4 Benefits of Domex 5 How much weight can you save? 6 Domex 6 Docol 7 Superior Strength 8 Domex MC 10 Domex 960 and Domex

More information

durostat 400/450/500 Hot-rolled cut sheets Data sheet May 2017 Wear-resistant sheets made from hot-rolled steel strip Convincing advantages:

durostat 400/450/500 Hot-rolled cut sheets Data sheet May 2017 Wear-resistant sheets made from hot-rolled steel strip Convincing advantages: Hot-rolled cut sheets durostat 400/450/500 CUT SHEETS Data sheet May 2017 Wear-resistant sheets made from hot-rolled steel strip durostat 400, durostat 450 and durostat 500 typically achieve surface hardness

More information

SOLEIL A2: A 13% Cr high strength martensitic stainless steel (410 grade) C F

SOLEIL A2: A 13% Cr high strength martensitic stainless steel (410 grade) C F Indu SOLEIL A2 SOLEIL A2: A 13% Cr high strength martensitic stainless (410 grade) SOLEIL A2 has combined chromium (about 13%) and carbon (about 0.10%) additions to provide an excellent combination of

More information

Hot rolled Steel Plates, Sheets and Coils Steels resistant to wear and surface pressure Raex

Hot rolled Steel Plates, Sheets and Coils Steels resistant to wear and surface pressure Raex Hot rolled Steel Plates, Sheets and Coils Steels resistant to wear and surface pressure Raex Raex is a hardened steel grade with excellent hardness and strength properties and is resistant to abrasion

More information

PLASTIC MOULD STEEL RS 100

PLASTIC MOULD STEEL RS 100 PLASTIC MOULD STEEL RS 100 PLASTIC MOULD STEEL Family of RS plastic mould steel RS grade W.Nr. DIN AISI RS 100 1.2312 40CrMnMoS8-6 ~P20 RS 101 1.2311 40CrMnMo7 ~P20 RS 103 1.2738 40CrMnNiMo8-6-1 RS 105

More information

EAM :2003/05 Revision 01 21/10/2016

EAM :2003/05 Revision 01 21/10/2016 European Approval for Materials Data Sheet EAM-0879-03 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described

More information

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments.

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Industeel URANUS 2202 The alternative to 304L UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Its higher strength allows

More information

Industeel Industeel, the right steel Creusabro at the right place Unique, Best, Proven

Industeel Industeel, the right steel Creusabro at the right place Unique, Best, Proven Industeel Industeel, Creusabro the right steel at Unique, the right Best, place Proven A complete range to meet any situation Creusabro is a complete range of advanced abrasion resistant steel plates bringing

More information

DILLINGER HÜTTE ULTRA-HIGH STRENGTH AND WEAR RESISTANT PLATES DILLIMAX & DILLIDUR

DILLINGER HÜTTE ULTRA-HIGH STRENGTH AND WEAR RESISTANT PLATES DILLIMAX & DILLIDUR DILLINGER HÜTTE ULTRA-HIGH STRENGTH AND WEAR RESISTANT PLATES DILLIMAX & DILLIDUR Status 10/2014 DILLIMAX AND DILLIDUR ULTRA-HIGH STRENGTH AND WEAR RESISTANT PLATE FROM DILLINGER HÜTTE DILLIMAX and DILLIDUR

More information

LONG-TERM INVESTMENT WITH WEAR-RESISTANT STEEL DILLIDUR DILLINGER HÜTTE GTS

LONG-TERM INVESTMENT WITH WEAR-RESISTANT STEEL DILLIDUR DILLINGER HÜTTE GTS LONG-TERM INVESTMENT WITH WEAR-RESISTANT STEEL DILLIDUR DILLINGER HÜTTE GTS WEAR-RESISTANT STEEL IS A MATTER OF TRUST Large manufacturers of construction machinery have to work hard to earn their good

More information

EN

EN EN 10216 EN 10216-2 is a European standard suitable for seamless steel tubes for pressure purposes. Technical delivery conditions-part 2: Non-alloy and steel tubes with specified elevated temperature properties.(include

More information

Structural Steel Plate and Strip to EN 10025

Structural Steel Plate and Strip to EN 10025 Data sheet: A3.7 Structural Steel Plate and Strip to EN 10025 General description ArcelorMittal South Africa produces and markets hot rolled structural steel plate and coil to EN 10025 in the following

More information

COVERED ELECTRODES FOR (SMAW / MMA)

COVERED ELECTRODES FOR (SMAW / MMA) Lasting Connections SELECTION GUIDE COVERED ELECTRODES FOR (SMAW / MMA) voestalpine Böhler Welding www.voestalpine.com/welding BÖHLER WELDING Introduction Lasting Connections As a pioneer in welding consumables

More information

SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS

SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3RE60 is a duplex (austenitic-ferritic) stainless steel characterized by the following properties: High resistance to stress corrosion cracking (SCC)

More information

WORKSHOP RECOMMENDATIONS

WORKSHOP RECOMMENDATIONS WORKSHOP RECOMMENDATIONS Workshop recommendations 1 WELDING RECOMMENDATIONS SSAB s protection plates have a lean chemical composition which supports a high degree of weldability. Furthermore these steel

More information

Problem Steels 1. Welding Consumables Problem Steels. Section 12 - Welding Consumables. 12 Problem Steels. Welding of Problem Steels 2

Problem Steels 1. Welding Consumables Problem Steels. Section 12 - Welding Consumables. 12 Problem Steels. Welding of Problem Steels 2 Problem Steels 1 Afrox Product Reference Manual Problem Steels Section - Problem Steels 1 Welding of Problem Steels 2 Problem Steels Electrodes 3 Problem Steels MIG & TIG Wires 7 Problem Steels Flux Cored

More information

EAM :2003/05 Revision 01 21/10/2016

EAM :2003/05 Revision 01 21/10/2016 European Approval for Materials Data Sheet EAM-0879-04 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described

More information

SOLEIL 4003: A cost effective, easy to fabricate 12% Cr stainless steel. Thermal conductivity (W m - 1 K - 1 )

SOLEIL 4003: A cost effective, easy to fabricate 12% Cr stainless steel. Thermal conductivity (W m - 1 K - 1 ) Industeel SOLEIL 4003 SOLEIL 4003: A cost effective, easy to fabricate 12% Cr stainless steel SOLEIL 4003 is a cost effective weldable 12% Cr stainless steel combining: > > Strength and ductility in the

More information

Hardfacing Wear Plates

Hardfacing Wear Plates Kobatek ABRAMAX Hardfacing Wear Plates PROTECTIVE MAINTENANCE TECHNOLOGY Kobatek ABRAMAX Wear Plates Wear Plates is the general name given to a low carbon steel which coated on the surface with high abrasive

More information

Forta SDX 2507 EN , ASTM UNS S32750

Forta SDX 2507 EN , ASTM UNS S32750 Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely

More information

Typical Applications: Chimneys, bridges, tubular bridges, façades, containers, tanks.

Typical Applications: Chimneys, bridges, tubular bridges, façades, containers, tanks. COR-TEN Hot-Rolled Weather Resistant Steel Generally 3 Thick & Above technical data COR-TEN A and COR-TEN B are weather resistant steel grades optimised through their alloying elements (copper, chromium,

More information

TAM Plus is the new range of hot rolled mechanical tubes, designed by Tenaris to better meet the needs of industrial sector.

TAM Plus is the new range of hot rolled mechanical tubes, designed by Tenaris to better meet the needs of industrial sector. TAM Plus TAM Plus Reference norm EN 10297-1 Seamless STEEL tubes with high machinability (HL) and close tolerances for mechanical applications TAM Plus is the new range of hot rolled mechanical tubes,

More information

DIWA 353 Alloyed steel plates for economic constructions of shell boilers

DIWA 353 Alloyed steel plates for economic constructions of shell boilers DIWA 353 Alloyed steel plates for economic constructions of shell boilers 1 1. Introduction Due to the huge development of the Chinese economy the power demand is rising tremendously As many power plants

More information

Hull and machinery steel forgings

Hull and machinery steel forgings (1978) (Rev.1 1980) (Rev.2 July 2002) (Rev.3 May 2004) Hull and machinery steel forgings.1 Scope.1.1 These requirements are applicable to steel forgings intended for hull and machinery applications such

More information

Cast Steel Propellers W27. (May 2000) (Rev.1 May 2004)

Cast Steel Propellers W27. (May 2000) (Rev.1 May 2004) (May 2000) (Rev.1 May 2004) Cast Steel Propellers 1. Scope 1.1 These unified requirements are applicable to the manufacture of cast steel propellers, blades and bosses. 1.2 Where the use of alternative

More information

ENDURA Dual - The New Standard for Fixed Plant Liners used in Ore Processing Paul Kobelke, Sandvik Materials Technology,

ENDURA Dual - The New Standard for Fixed Plant Liners used in Ore Processing Paul Kobelke, Sandvik Materials Technology, ENDURA Dual - The New Standard for Fixed Plant Liners used in Ore Processing Paul Kobelke, Sandvik Materials Technology, ENDURA Dual fixed Plant Liners Presentation TOPICS 1 The GRIZZLE Intro impact abrasion

More information

BS EN Hollow bars for machining Technical delivery conditions Non alloy and alloy steels

BS EN Hollow bars for machining Technical delivery conditions Non alloy and alloy steels BS EN 10294 1. Hollow bars for machining Technical delivery conditions Non alloy and alloy steels 1 Scope This part of EN 10294 specifies the technical delivery conditions for seamless steel hollow bars

More information

Part 7: 1992 Specification for materials and workmanship Cold-formed

Part 7: 1992 Specification for materials and workmanship Cold-formed Steel fabrication and erection British and European Standards for steelwork 1313 BS 4604 BS 5400 BS 5950 Specification for the use of high strength friction grip bolts in structural steelwork Metric series

More information

Denne side er kun tilgængelig på Engelsk Sandvik 13RM19 (Strip steel)

Denne side er kun tilgængelig på Engelsk Sandvik 13RM19 (Strip steel) Datablad opdateret 2013 11 27 08:40:15 (afløser alle tidligere versioner) Denne side er kun tilgængelig på Engelsk Sandvik 13RM19 (Strip steel) Sandvik 13RM19 is a stainless spring steel combining high

More information

Uddeholm Formax. Formax is a trademark registered in Sweden

Uddeholm Formax. Formax is a trademark registered in Sweden Uddeholm Formax Formax is a trademark registered in Sweden UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder.

More information

Why Hardox? Juha Erkkilä

Why Hardox? Juha Erkkilä Why Hardox? Juha Erkkilä 50 mm Hardox 450 Hardox Wearparts Hardox Plate Product Program Steel Grade Hardness Nominal [HBW] Impact toughness LCVN typical (20 mm) TCVN minimum Bending properties Transverse

More information

Sandvik SAF 2205 (Billets)

Sandvik SAF 2205 (Billets) Datasheet updated 2013 11 28 14:13:21 (supersedes all previous editions) Sandvik SAF 2205 (Billets) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by: High resistance

More information

HIGH-STRENGTH AND ULTRA-HIGH- STRENGTH THERMOMECHANICALLY ROLLED FINE-GRAINED STEELS. Technical terms of delivery for heavy plates 1 March 2019

HIGH-STRENGTH AND ULTRA-HIGH- STRENGTH THERMOMECHANICALLY ROLLED FINE-GRAINED STEELS. Technical terms of delivery for heavy plates 1 March 2019 HIGH-STRENGTH AND ULTRA-HIGH- STRENGTH THERMOMECHANICALLY ROLLED FINE-GRAINED STEELS Technical terms of delivery for heavy plates 1 March 2019 voestalpine Grobblech GmbH www.voestalpine.com/grobblech 1

More information

71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry

71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.

More information

VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel

VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel Industeel VIRGO 15.5 PH VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 15.5 PH is a precipitation hardening martensitic stainless steel with 15% Cr, 5% Ni,

More information

Available online at Procedia Engineering 40 (2012 ) Steel Structures and Bridges 2012

Available online at   Procedia Engineering 40 (2012 ) Steel Structures and Bridges 2012 Available online at www.sciencedirect.com Procedia Engineering 40 (2012 ) 481 486 Steel Structures and Bridges 2012 Comparison of Properties and Experience with the Use of Thermomechanical and Normalized

More information

LOW HEAT INPUT WELDING ALLOYS

LOW HEAT INPUT WELDING ALLOYS ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,

More information

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,

More information

VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel

VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Industeel VIRGO 17.4 PH VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 17.4 PH is a maraging martensitic stainless steel with Cu and Nb/Cb additions. The

More information

WELDING WIRES FOR MAG(CO 2 ) WELDING

WELDING WIRES FOR MAG(CO 2 ) WELDING WELDING WIRES FOR MAG(CO 2 ) WELDING Classification: EN 440 G4Si1 EN1668 WSG2 DIN 8559 SG 2 ASME/AWS/A 5.18 ER70S6 Description and Application: Solid copper coated welding wire for welding in gas shielding

More information

Heat-Treated Steel Plate. The industry standard for high strength and abrasion resistance

Heat-Treated Steel Plate. The industry standard for high strength and abrasion resistance Heat-Treated Steel Plate The industry standard for high strength and abrasion resistance Introduction Algoma is a fully integrated steel producer based in Sault Ste. Marie, Ontario. As a founding industry

More information

SS-EN ISO 9001 SS-EN ISO 14001

SS-EN ISO 9001 SS-EN ISO 14001 UDDEHOLM FORMAXTM This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty

More information

High-strength heavy plates. Weight savings combined with excellent weldability. voestalpine Grobblech GmbH

High-strength heavy plates. Weight savings combined with excellent weldability. voestalpine Grobblech GmbH High-strength heavy plates Weight savings combined with excellent weldability voestalpine Grobblech GmbH www.voestalpine.com/grobblech High-strength and wear-resistant steels voestalpine Grobblech quantity

More information

Consumables for hardfacing.

Consumables for hardfacing. Consumables for hardfacing Contents Home 411 Hardfacing Contents Designation DIN SFA/AWS Page SMAW OK 83.27 E1-UM-350-414 OK 83.28 E1-UM-300-415 OK 83.29 E1-UM-300-416 OK 83.50 E6-UM-55-417 OK 83.53 E

More information

These elements are in carbon steels in minimal amounts, usually less than 1%.

These elements are in carbon steels in minimal amounts, usually less than 1%. Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,

More information

WORLDSKILLS STANDARD SPECIFICATION

WORLDSKILLS STANDARD SPECIFICATION WORLDSKILLS STANDARD SPECIFICATION Skill 10 Welding WSC2017_WSSS10 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge, understanding and specific

More information

HH W1030 HF BUILD-UP FOR CARBON STEEL

HH W1030 HF BUILD-UP FOR CARBON STEEL HH W1030 HF BUILD-UP FOR CARBON STEEL HH W1030 HF is a high hardness build-up wire with excellent compressive strength. It is recommended for any application for any application where the weld deposits

More information

Subsea Structures. Hot rolled MSH Sections for Oil & Gas Constructions

Subsea Structures. Hot rolled MSH Sections for Oil & Gas Constructions Subsea Structures Hot rolled MSH Sections for Oil & Gas Constructions p.2 / Vallourec / Subsea Equipment Vallourec Leader in Premium Tubular Solutions Over 125 years experience in hot rolled tube production

More information

Stainless Steel (17/4PH&630) Bar

Stainless Steel (17/4PH&630) Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

Stainless Steel Bar

Stainless Steel Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

GRADES BURAB Typical analysis % Application/Properties

GRADES BURAB Typical analysis % Application/Properties Cold-rolled strip Cold-rolled strip SIZE RANGE EDGES Slitted mm Deburred 4,00 Round 3.50 3.00 Straight 2.50 2.00 1.50 1.00 FINISHES Blue Bright Extra bright* *according to agreement Strip thickness 0.90

More information

MICROFUSION Maintenance Welding Alloys DM - 6

MICROFUSION Maintenance Welding Alloys DM - 6 MICROFUSION STEEL DM - 6 FERRITE BALANCED ALLOY FOR ALL STEELS GIVING SUPER STRENGTH Provides exceptional strength A non-cracking alloy for all steels Special "Ionized Arc Transfer drastically reduces

More information

Tailor-Made Protectivity Welding Solutions for the Mining Industry

Tailor-Made Protectivity Welding Solutions for the Mining Industry Tailor-Made Protectivity Welding Solutions for the Mining Industry www.voestalpine.com/welding Metallurgical Expertise for Best Welding Results (formerly Böhler Welding Group) is a leading manufacturer

More information

DNVGL-CP-0347 Edition May 2016

DNVGL-CP-0347 Edition May 2016 CLASS PROGRAMME Approval of manufacturers DNVGL-CP-0347 Edition May 2016 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that

More information

ISOTROP. Industeel. ISOTROP: Hot work tool steel for die casting dies PROPERTIES STANDARDS STEELMAKING PROCESS CHEMICAL ANALYSIS WEIGHT %

ISOTROP. Industeel. ISOTROP: Hot work tool steel for die casting dies PROPERTIES STANDARDS STEELMAKING PROCESS CHEMICAL ANALYSIS WEIGHT % Industeel TROP TROP: Hot work tool steel for die casting dies TROP is a hot work tool steel, developed by Industeel to offer a cost efficient alternative to ESR grades in the die casting die industry.

More information

DIN SEAMLESS CIRCULAR STEEL TUBES FOR STRUCTURAL STEEL WORK

DIN SEAMLESS CIRCULAR STEEL TUBES FOR STRUCTURAL STEEL WORK DIN 1712184 SEAMLESS CIRCULAR STEEL TUBES FOR STRUCTURAL STEEL WORK 1. Field of application 1.1 This standard applies to seamless circular tubes made from the steels listed in tables 1 and 2 These tubes

More information

OUTOTEC EDMESTON SX SYSTEM

OUTOTEC EDMESTON SX SYSTEM OUTOTEC EDMESTON SX SYSTEM The Outotec Edmeston SX System comprises equipment for the absorption stage of a sulfuric acid plant, manufactured using Edmeston SX, our proprietary acid-resistant stainless

More information

Austarc 12P. Austarc 13S GENERAL PURPOSE ELECTRODES - MILD STEEL GENERAL PURPOSE ELECTRODES - MILD STEEL 76 CONTENTS CLASSIFICATION: DESCRIPTION:

Austarc 12P. Austarc 13S GENERAL PURPOSE ELECTRODES - MILD STEEL GENERAL PURPOSE ELECTRODES - MILD STEEL 76 CONTENTS CLASSIFICATION: DESCRIPTION: GENERAL PURPOSE S - MILD STEEL Austarc 12P AS/NZS 4855-B E43 13 A AWS A5.1: E6013 A popular, easy starting, smooth running, all positional mild steel general purpose electrode. Austarc 12P has the extra

More information

Sandvik SAF 2205 (Tube and pipe, seamless)

Sandvik SAF 2205 (Tube and pipe, seamless) Datasheet updated 2012 10 14 10:38:02 (supersedes all previous editions) Sandvik SAF 2205 (Tube and pipe, seamless) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by:

More information

Hollow bars TN According to EN :2005

Hollow bars TN According to EN :2005 Hollow bars TN 294-04 According to EN 10294-1:2005 Hollow Bars are seamless tubes specifically produced for machining. They are characterized by offering greater cutting speeds and longer tool life. The

More information

Content. patinax. Areas of application. Product information for weathering steel (hot-rolled strip, cut-to-length plate and quarto plate)

Content. patinax. Areas of application. Product information for weathering steel (hot-rolled strip, cut-to-length plate and quarto plate) Steel patinax Product information for weathering steel (hot-rolled strip, cut-to-length plate and quarto plate) Issue: April 1, 2018, version 0 / WB 531, 532 Areas of application patinax weathering steel

More information

HIDRAVLIKA,PNEVMATIKA, STROJEGRADNJA, TRGOVINA, SERVIS. Sl-Otoče 5a, 4244 PODNART Tel.: Fax.: Himont Roll Cladding

HIDRAVLIKA,PNEVMATIKA, STROJEGRADNJA, TRGOVINA, SERVIS. Sl-Otoče 5a, 4244 PODNART Tel.: Fax.: Himont Roll Cladding HIDRAVLIKA,PNEVMATIKA, STROJEGRADNJA, TRGOVINA, SERVIS Sl-Otoče 5a, 4244 PODNART Tel.: +386 4 533 10 39 Fax.: +386 4 533 10 59 Himont Roll Cladding ROLLER FOR CONTINUOUS SLAB CASTERS Welding of new and

More information

KNIFE STEELS. voestalpine BÖHLER Bleche GmbH & Co KG

KNIFE STEELS. voestalpine BÖHLER Bleche GmbH & Co KG KNIFE STEELS voestalpine BÖHLER Bleche GmbH & Co KG www.voestalpine.com/bohler-bleche FOCUSED ON FLEXIBILITY & QUALITY OUR MATERIAL COMPETENCE AND CAREFUL ADAPTATION TO THE DEMANDS OF THE CLIENT GIVES

More information