CRYSTAL GEOMETRY. An Introduction to the theory of lattice transformation in metallic materials with Matlab applications. 8 courses of 2 hours
|
|
- Sylvia Price
- 6 years ago
- Views:
Transcription
1 CRYSTAL GEOMETRY An Introduction to the theory of lattice transformation in metallic materials with Matlab applications Français Cours 0 : lundi 4 décembre 9h30-11h30 Cours 1 : vendredi 8 décembre 9h30-11h30 Cours 2 : lundi 11 décembre 9h30-11h30 Cours 3 : vendredi 15 décembre 9h30-11h30 Cours 4 : lundi 8 janvier h30-11h30 Cours 5 : mercredi 10 décembre 9h30-11h30 Cours 6 : lundi 15 janvier 9h30-11h30 Cours 7 : vendredi 19 janvier 9h30-11h30 8 courses of 2 hours English course 0: Monday 11 December 13h30-15h30 course 1: Friday 15 December 13h30-15h30 course 2: Monday 18 December 13h30-15h30 course 3: Monday 8th January h30-15h30 course 4: Friday 12 January 13h30-15h30 course 5: Monday 15 January 13h30-15h30 course 6: Friday 19 January 13h30-15h30 course 7 : Monday 22 January 13h30-15h30 Jean-Sébastien LECOMTE ROOM DN1-005 LEM3
2 Part 0: Matlab & Matrix Algebra What is MATLAB? MATLAB Screen Variables, array, matrix, indexing Operators (Arithmetic, relational, logical) MATLAB Input and Output Display Facilities Flow Control Using of M-File Writing User Defined Functions Applied Exercise Symbolic Math Toolbox Matrix Algebra The use of the Matrix in crystallography Particular form of the square matrix Matrix algebra HomeWork n 1 Course 0 (en français) Lundi 4 décembre 9h30-11h30 (in English) Monday 11 December 13h30-15h30 Part I: Elements of crystallography 1.1 Crystal system (crystal family) 1.2 Reciprocal lattice 1.3 The metric tensor of a crystal 1.4 BCC and FCC in a primitive unit cell 1.5 Correspondence 1.6 The crystalline directions 1.7 Crystal planes 1.8 The indexing of hexagonal lattices HomeWork n 2 Cours 1 : vendredi 8 décembre 9h30-11h30 course 1: Friday 15 December 13h30-15h30
3 Part II: Change of basis 2.1 Vector equation 2.2 Establishment of the matrix of the change of base 2.3 Epitaxy 2.4 Available orientation descriptors Rotation Matrix Euler Angles Miller Indices Axis/Angle of Rotation Rodrigues Vector Quaternion 2.5 Symmetry operations Inversion center (Z) The axis of symmetry (X) (proper axis) Symmetry Plane (Σ) Rotary inversions (Δ) ou rotoinversion (improper axes) 2.6 The rigid body rotation 2.7 Pole Figure stereographic projection equal-area projection 2.8 Inverse Pole Figure HomeWork n 3 Cours 2 : lundi 11 décembre 9h30-11h30 course 2: Monday 18 December 13h30-15h30
4 Part II BIS: Introduction to MTEX 2.9 Orientation Mapping 2.10 Orientation Distribution 2.11 Orientation Spread 2.12 Misorientation Distribution Mackenzie Distribution 2.13 Misorientations, Disorientations 2.14 Mean Orientation 2.15 Orientation Spread Anisotropy 2.16 KAM & GOS HomeWork n 4 Cours 3 : vendredi 15 décembre 9h30-11h30 course 3: Monday 8th January h30-15h30 Part IV: Orientation relationship and orientation variants 3.1 Twinning Twinning in FCC Twinning in BCC Twinning in HCP 3.2 Orientation relationship between FCC and HCP 3.3 Orientation relationship between HCP and BCC 3.4 Orientation Relationship between FCC and BCC Bain Orientation Relationship Kurdjumov-Sachs Relationship Nishiyama Orientation Relationship HomeWork n 5 Cours 4 : lundi 8 janvier 9h30-11h30 course 4: Friday 12 January 13h30-15h30
5 Part IV: Homogeneous lattice deformation 4.1 Homogeneous deformation Unit matrix Rotation Matrix Pure deformation Pure shear Invariant deformation plane Strain ellipsoid and determination of principal diagonals 4.2 Special elements of crystallography 4.3 Relationships between the different deformation matrices HomeWork n 6 Cours 5 : mercredi 10 décembre 9h30-11h30 course 5: Monday 15 January 13h30-15h30 Part V: Shear in metal crystals 5.1 Schmid factor 5.2 Formation of mechanical twins Twinning formation in BCC lattice Twinning Formation in FCC lattice Comparison between the BCC lattice and the FCC lattice Twinning Formation in HCP lattice 5.3 Formation of martensite γ ε Martensitic transformation ε α Martensitic transformation 5.4 γ α Martensitic transformation Kurdjumov and Sachs Model Nishiyama Model Bogers and Burgers Model Pitsch Model HomeWork n 7 Cours 6 : lundi 15 janvier 9h30-11h30 course 6: Friday 19 January 13h30-15h30
6 Part VI: Crystallographic and phenomenological theory of martensitic transformation 6.1 Domain of validity 6.2 Basis of the crystallographic theory of phenomenological martensitic transformation 6.3 Wechsler, Lieberman and Read Theory 6.4 Bowles and Mackenzie Theory 6.5 Ross and Crocker Theory HomeWork n 8 Cours 7 : vendredi 19 décembre 9h30-11h30 course 7 : Monday 22 January 13h30-15h30
Worked examples in the Geometry of Crystals
. Worked examples in the Geometry of Crystals Second edition H. K. D. H. Bhadeshia Professor of Physical Metallurgy University of Cambridge Fellow of Darwin College, Cambridge i Book 377 ISBN 0 904357
More informationD. Srivastava, S. Banerjee and S. Ranganathan * Materials Science Division, Bhabha Atomic Research Center, Mumbai
Trans. Indian Inst. Met. Vol.57, No., June, pp. 5- TP 887 TE CRYSTALLOGRAPY OF TE BCC TO CP (ORTOEXAGONAL) MARTENSITIC TRANSFORMATION IN DILUTE Zr-Nb ALLOYS: D. Srivastava, S. Banerjee and S. Ranganathan
More informationCrystallographic orientation
Crystallographic orientation Orientations and misorientations Orientation (g): The orientation of the crystal lattice with respect to some reference frame; usual a frame defined by the processing or sample
More informationSTATE OF SOLIDIFICATION & CRYSTAL STRUCTURE
STATE OF SOLIDIFICATION & CRYSTAL STRUCTURE Chapter Outline Determination of crystal properties or properties of crystalline materials. Crystal Geometry! Crystal Directions! Linear Density of atoms! Crystal
More informationHomework 6: Misorientations; Solution A.D. Rollett, , Texture, Microstructure and Anisotropy. Due date: 26 th March, 2014
Homework 6: Misorientations; Solution A.D. Rollett, 27-75, Texture, Microstructure and Anisotropy Due date: 26 th March, 214 Q1. [1 points] Starting with a set of Euler angles {155.9419988793937, 8.5275738913345,
More informationRepresentation of Orientation
Representation of Orientation Lecture Objectives - Representation of Crystal Orientation Stereography : Miller indices, Matrices 3 Rotations : Euler angles Axis/Angle : Rodriques Vector, Quaternion - Texture
More informationSingle Crystal Deformation
Single Crystal Deformation To make the connection between dislocation behavior and yield strength as measured in tension, consider the deformation of a single crystal. Given an orientation for single slip,
More informationHomework 6: Calculation of Misorientation; A.D. Rollett, , Texture, Microstructure and Anisotropy
Homework 6: Calculation of Misorientation; A.D. Rollett, 27-75, Texture, Microstructure and Anisotropy Due date: 8 th November, 211 Corrected 8 th Nov. 211 Q1. [6 points] (a) You are given a list of orientations
More informationThe Structure of Materials
The Structure of Materials Samuel M. Allen Edwin L. Thomas Massachusetts Institute of Technology Cambridge, Massachusetts / John Wiley & Sons, Inc. New York Chichester Weinheim Brisbane Singapore Toronto
More informationSymmetry and Anisotropy Structure, Properties, Sample and Material, Texture and Anisotropy, Symmetry
Symmetry and Anisotropy Structure, Properties, Sample and Material, Texture and Anisotropy, Symmetry Objectives Symmetry Operators & Matrix representation. Effect of crystal and sample symmetry
More informationIn-situ Observation of Microstructure Change in Steel by EBSD
NIPPON STEEL & SUMITOMO METAL TECHNICAL REPORT No. 114 MARCH 2017 Technical Report UDC 621. 785. 36 In-situ Observation of Microstructure Change in Steel by EBSD Masayuki WAKITA* Seiichi SUZUKI Abstract
More informationStructure factors and crystal stacking
Structure factors and crystal stacking Duncan Alexander EPFL-CIME 1 Contents Atomic scattering theory Crystal structure factors Close packed structures Systematic absences Twinning and stacking faults
More informationChapter One: The Structure of Metals
Fourth Edition SI Version Chapter One: The Structure of Metals 2010. Cengage Learning, Engineering. All Rights Reserved. 1.1 Importance of the structure: Structures Processing Properties Applications Classification
More informationChapter-3 MSE-201-R. Prof. Dr. Altan Türkeli
Chapter-3 MSE-201-R Prof. Dr. Altan Türkeli The Structure of Crystalline Solids FUNDAMENTAL CONCEPTS Solid materials may be classified according to the regularity with which atoms or ions are arranged
More informationSymmetry in crystalline solids.
Symmetry in crystalline solids. Translation symmetry n 1,n 2,n 3 are integer numbers 1 Unitary or primitive cells 2D 3D Red, green and cyano depict all primitive (unitary) cells, whereas blue cell is not
More informationLectures on: Introduction to and fundamentals of discrete dislocations and dislocation dynamics. Theoretical concepts and computational methods
Lectures on: Introduction to and fundamentals of discrete dislocations and dislocation dynamics. Theoretical concepts and computational methods Hussein M. Zbib School of Mechanical and Materials Engineering
More informationPhase Transformation in Materials
2015 Fall Phase Transformation in Materials 12. 09. 2015 Eun Soo Park Office: 33-313 Telephone: 880-7221 Email: espark@snu.ac.kr Office hours: by an appointment 1 Contents in Phase Transformation Background
More informationExample: Compute the wavelength of a 1 [kg] block moving at 1000 [m/s].
Example: Calculate the energy required to excite the hydrogen electron from level n = 1 to level n = 2. Also calculate the wavelength of light that must be absorbed by a hydrogen atom in its ground state
More information3, MSE 791 Mechanical Properties of Nanostructured Materials
3, MSE 791 Mechanical Properties of Nanostructured Materials Module 3: Fundamental Physics and Materials Design Lecture 1 1. What is strain (work) hardening? What is the mechanism for strain hardening?
More informationX-RAY DIFFRACTIO N B. E. WARREN
X-RAY DIFFRACTIO N B. E. WARREN Chapter 1 X-Ray Scattering by Atom s 1.1 Classical scattering by a free electron 1 1.2 Polarization by scattering 4 1.3 Scattering from several centers, complex representation
More informationCrystallography of the B2 R B19 phase transformations in NiTi
Materials Science and Engineering A 374 (2004) 292 302 Crystallography of the B2 R B19 phase transformations in NiTi Xiangyang Zhang, Huseyin Sehitoglu Department of Mechanical and Industrial Engineering,
More informationEffect of Stress on Variant Selection in Lath Martensite in Low-carbon Steel
, pp. 1453 1461 Effect of Stress on Variant Selection in Lath Martensite in Low-carbon Steel Yamato MISHIRO,* Shoichi NAMBU, Junya INOUE and Toshihiko KOSEKI Department of Materials Engineering, The University
More informationCondensed Matter Physics Prof. G.Rangarajan Department of Physics Indian Institute of Technology, Madras
Condensed Matter Physics Prof. G.Rangarajan Department of Physics Indian Institute of Technology, Madras Lecture - 3 Symmetry in Perfect Solids (Continued) (Refer Slide Time: 00:26) So, the last lecture,
More informationCRYSTAL LATTICE. Defining lattice: Mathematical construct; ideally infinite arrangement of points in space.
CRYSTAL LATTICE How to form a crystal? 1. Define the structure of the lattice 2. Define the lattice constant 3. Define the basis Defining lattice: Mathematical construct; ideally infinite arrangement of
More informationCHAPTER 3: SYMMETRY AND GROUPS, AND CRYSTAL STRUCTURES. Sarah Lambart
CHAPTER 3: SYMMETRY AND GROUPS, AND CRYSTAL STRUCTURES Sarah Lambart RECAP CHAP. 2 2 different types of close packing: hcp: tetrahedral interstice (ABABA) ccp: octahedral interstice (ABCABC) Definitions:
More informationCrytallography of Maraging Steel: Influence of Variant Selection.
Crytallography of Maraging Steel: Influence of Variant Selection. Neuman Fontenele Viana 1 ; Hamilton Ferreira Gomes de Abreu 1 ; 1 Department of Metallurgical Engineering and Materials,UFC, Fortaleza,
More informationThe (112 2) and (1 21 6) twinning modes modelled by obliquity correction of a (58, a+2b) prototype stretch twin
The (2 2) and ( 2 6) twinning modes modelled by obliquity correction of a (58, a+2b) prototype stretch twin Cyril Cayron Laboratory of ThermoMechanical Metallurgy (LMTM), PX Group Chair, Ecole Polytechnique
More informationThesis for Doctor of Philosophy. Variant selection of Allotriomorphic Ferrite in Steels
Thesis for Doctor of Philosophy Variant selection of Allotriomorphic Ferrite in Steels Kim, Dae Woo ( 金旲優 ) Computational Metallurgy Graduate Institute of Ferrous Technology Pohang University of Science
More informationSolid State Device Fundamentals
Solid State Device Fundamentals ENS 345 Lecture Course by Alexander M. Zaitsev alexander.zaitsev@csi.cuny.edu Tel: 718 982 2812 Office 4N101b 1 Solids Three types of solids classified according to atomic
More informationMSE420/514: Session 1. Crystallography & Crystal Structure. (Review) Amaneh Tasooji
MSE420/514: Session 1 Crystallography & Crystal Structure (Review) Crystal Classes & Lattice Types 4 Lattice Types 7 Crystal Classes SIMPLE CUBIC STRUCTURE (SC) Rare due to poor packing (only Po has this
More informationFundamentals of Crystalline State and Crystal Lattice p. 1 Crystalline State p. 2 Crystal Lattice and Unit Cell p. 4 Shape of the Unit Cell p.
Fundamentals of Crystalline State and Crystal Lattice p. 1 Crystalline State p. 2 Crystal Lattice and Unit Cell p. 4 Shape of the Unit Cell p. 7 Crystallographic Planes, Directions, and Indices p. 8 Crystallographic
More informationMechanical properties of polymer foams : influence of the internal architecture on the stiffness
Mechanical properties of polymer foams : influence of the internal architecture on the stiffness G. DALONGEVILLE, M. DABO, C. GAUTHIER, T. ROLAND Institut Charles Sadron (ICS), UPR22 CNRS, Strasbourg,
More informationChapter 1. Crystal Structure
Chapter 1. Crystal Structure Crystalline solids: The atoms, molecules or ions pack together in an ordered arrangement Amorphous solids: No ordered structure to the particles of the solid. No well defined
More informationPhysics of Materials: Symmetry and Bravais Lattice To understand Crystal Plane/Face. Dr. Anurag Srivastava
Physics of Materials: Symmetry and Bravais Lattice To understand Crystal Plane/Face Dr. Anurag Srivastava Atal Bihari Vajpayee Indian Institute of Information Technology and Manegement, Gwalior Physics
More informationChapter Outline How do atoms arrange themselves to form solids?
Chapter Outline How do atoms arrange themselves to form solids? Fundamental concepts and language Unit cells Crystal structures Face-centered cubic Body-centered cubic Hexagonal close-packed Close packed
More informationFundamentals of Crystalline State p. 1 Introduction p. 1 Crystalline state p. 2 Crystal lattice and crystal structure p. 4 Shape of the unit cell p.
Preface p. xvii Fundamentals of Crystalline State p. 1 Introduction p. 1 Crystalline state p. 2 Crystal lattice and crystal structure p. 4 Shape of the unit cell p. 6 Content of the unit cell p. 7 Asymmetric
More informationMambo is the perfect tool for viewing EBSD data in pole and inverse pole figures.
Mambo Pole figure and inverse pole figure software The physical properties of many samples are dependent on the common alignment of particular crystallographic directions: one of the easiest ways to view
More informationProblems to the lecture Physical Metallurgy ( Materialkunde ) Chapter 6: Mechanical Properties
Institut für Metallkunde und Metallphysik Direktor: Prof. Dr. rer. nat. Günter Gottstein RWTH Aachen, D-52056 Aachen Internet: http://www.imm.rwth-aachen.de E-mail: imm@imm.rwth-aachen.de Tel.: +49 241
More informationASE324: Aerospace Materials Laboratory
ASE324: Aerospace Materials Laboratory Instructor: Rui Huang Dept of Aerospace Engineering and Engineering Mechanics The University of Texas at Austin Fall 2003 Lecture 3 September 4, 2003 Iron and Steels
More informationPhases transformation textures in steels
J. Phys. IV France 0 (004) 37-44 EDP Sciences, Les Ulis DOI: 0.05/jp4:004005 Phases transformation textures in steels C. Cabus,, H. Regle and B. Bacroix IRSID-CMC, Voie Romaine, BP. 3030, 5783 Maizières-lès-Metz
More informationGeneral Objective. To develop the knowledge of crystal structure and their properties.
CRYSTAL PHYSICS 1 General Objective To develop the knowledge of crystal structure and their properties. 2 Specific Objectives 1. Differentiate crystalline and amorphous solids. 2. To explain nine fundamental
More informationApplication of MTEX in steel research
Application of Dr. Marco Witte Salzgitter, 20 th February 2016 SZMF, ESWW, Folie 2, 26/02/16 Overview Introduction Macro Texture Analysis (XRD & EBSD) Elasticity tensor Wave velocities and ultrasound Symmetry
More informationShape Memory Alloys. [1] Hodgson DE, Wu MH & Biermann RJ (1990). Shape Memory Alloys, Metals Handbook. Vol. 2. ASM International, Ohio,
Shape Memory Alloys Metals are characterized by physical qualities as strength, ductility and conductivity. Shape memory alloys (SMA) constitute a group of metallic materials with the ability to recover
More informationLecture # 11 References:
Lecture # 11 - Line defects (1-D) / Dislocations - Planer defects (2D) - Volume Defects - Burgers vector - Slip - Slip Systems in FCC crystals - Slip systems in HCP - Slip systems in BCC Dr.Haydar Al-Ethari
More informationReview key concepts from last lecture (lattice + basis = unit cell) Bravais lattices Important crystal structures Intro to miller indices
Outline: Review key concepts from last lecture (lattice + basis = unit cell) Bravais lattices Important crystal structures Intro to miller indices Review (example with square lattice) Lattice: square,
More informationThe Change of Orientation Relationships Between Austenite and a 0 -Martensite During Deformation in High Manganese TRIP Steel
Acta Metall. Sin. (Engl. Lett.), 2015, 28(3), 289 294 DOI 10.1007/s40195-014-0195-3 The Change of Orientation Relationships Between Austenite and a 0 -Martensite During Deformation in High Manganese TRIP
More informationEnergy and Packing. typical neighbor bond energy. typical neighbor bond energy. Dense, regular-packed structures tend to have lower energy.
Energy and Packing Non dense, random packing Energy typical neighbor bond length typical neighbor bond energy r Dense, regular packing Energy typical neighbor bond length typical neighbor bond energy r
More informationTwins & Dislocations in HCP Textbook & Paper Reviews. Cindy Smith
Twins & Dislocations in HCP Textbook & Paper Reviews Cindy Smith Motivation Review: Outline Crystal lattices (fcc, bcc, hcp) Fcc vs. hcp stacking sequences Cubic {hkl} naming Hcp {hkil} naming Twinning
More informationThree stages: Annealing Textures. 1. Recovery 2. Recrystallisation most significant texture changes 3. Grain Growth
Three stages: Annealing Textures 1. Recovery 2. Recrystallisation most significant texture changes 3. Grain Growth Cold worked 85% Cold worked 85% + stress relieved at 300 C for 1 hr Cold worked 85% +
More informationPROOF COPY [BW10527] PRB
PHYSICAL REVIEW B 79, 9 6 Modeling analysis of the influence of plasticity on high pressure deformation of hcp-co Sébastien Merkel* Laboratoire de Structure et Propriétés de l Etat Solide, CNRS, Université
More informationMAX-PLANCK PROJECT REPORT
FINITE ELEMENT SIMULATION OF PLASTIC DEFORMATION OF STEELS MAX-PLANCK PROJECT REPORT D. Raabe, F. Roters Max-Planck-Institut für Eisenforschung Max-Planck-Str. 1 40237 Düsseldorf Germany February 2004,
More informationThe variant selection criteria in single-crystal CuAlNi shape memory alloys
Smart Mater. Struct. 9 (2000) 57 58. Printed in the UK PII: S0964-726(00)6060-4 The variant selection criteria in single-crystal CuAlNi shape memory alloys X Y Zhang, L C Brinson and Q P Sun Mechanical
More informationEffects of Temperature and Grain Size on the Transformation and the Deformation Behaviors of the TRIP (Transformation Induced Plasticity) Steels
University of Tennessee, Knoxville Trace: Tennessee Research and Creative Exchange Doctoral Dissertations Graduate School 12-2006 Effects of Temperature and Grain Size on the Transformation and the Deformation
More informationBasics of XRD part I. 1 KIT 10/31/17. Name of Institute, Faculty, Department. The Research University in the Helmholtz Association
Basics of XRD part I Dr. Peter G. Weidler Institute of Functional Interfaces IFG 1 KIT 10/31/17 The Research University in the Helmholtz Association Name of Institute, Faculty, Department www.kit.edu Overview
More informationCME 300 Properties of Materials. Monday, Wednesday, Friday 9:00 to 9:50 Swift 619
CME 300 Properties of Materials Monday, Wednesday, Friday 9:00 to 9:50 Swift 619 Dr. Greg Beaucage 492 Rhodes Hall (410 Rhodes Hall Lab) beaucag@uc.edu 556-3063 Office Hours: Monday and Wednesday 10:00
More informationSingle-Crystal Plasticity
Single-Crystal Plasticity Eric M. Taleff, Department of Mechanical Engineering, Austin, TX 78712 October 10, 2005 Single-Crystal Plasticity p.1 Schmid Factor [uvw] σ applied λ θ (hkl) The relationship
More informationFigure.1. The conventional unit cells (thick black outline) of the 14 Bravais lattices. [crystallographic symmetry] 1
[crystallographic symmetry] The crystallographic space groups. Supplementary to { 9.6:324} In the 3-D space there are 7 crystal systems that satisfy the point (e.g., rotation, reflection and inversion)
More informationTexture development during processing
Texture development during processing Course objectives: 1. To introduce the typical deformation textures in metals and alloys with FCC, BCC and HCP crystal structures 2. To explain the micro-mechanism
More informationProblem Set 2 Solutions
M 4733: Deformation and Fracture of ngineering Materials Spring 00 Problem Set Solutions *) Prove that for the case of cubic crystals the modulus of elasticity in any given direction may be given by the
More informationCHAPTER 3. Crystal Structures and Crystal Geometry 3-1
CHAPTER 3 Crystal Structures and Crystal Geometry 3-1 The Space Lattice and Unit Cells 3-2 Atoms, arranged in repetitive 3-Dimensional pattern, in long range order (LRO) give rise to crystal structure.
More informationTwo marks questions and answers. 1. what is a Crystal? (or) What are crystalline materials? Give examples
UNIT V CRYSTAL PHYSICS PART-A Two marks questions and answers 1. what is a Crystal? (or) What are crystalline materials? Give examples Crystalline solids (or) Crystals are those in which the constituent
More informationContinuous atomic displacements and lattice distortion during fcc-bcc martensitic transformation.
Continuous atomic displacements and lattice distortion during fcc-bcc martensitic transformation. Cyril Cayron Laboratory of ThermoMechanical Metallurgy LMTM, P Group Chair, Ecole Polytechnique Fédérale
More informationIndex. Cambridge University Press Introduction to Elasticity Theory for Crystal Defects R. W. Balluffi. Index.
Airy stress functions formulation of 60 1 table of 426 alternator operator 419 Brown s formula 255 Burgers equation 264 5 Christoffel stiffness tensor 34 corresponding elastic fields 25 7 curvature tensor,
More informationSingle crystal X-ray diffraction. Zsolt Kovács
Single crystal X-ray diffraction Zsolt Kovács based on the Hungarian version of the Laue lab description which was written by Levente Balogh, Jenő Gubicza and Lehel Zsoldos INTRODUCTION X-ray diffraction
More informationStrain. Two types of stresses: Usually:
Stress and Texture Strain Two types of stresses: microstresses vary from one grain to another on a microscopic scale. macrostresses stress is uniform over large distances. Usually: macrostrain is uniform
More informationChapter Outline. How do atoms arrange themselves to form solids?
Chapter Outline How do atoms arrange themselves to form solids? Fundamental concepts and language Unit cells Crystal structures! Face-centered cubic! Body-centered cubic! Hexagonal close-packed Close packed
More informationChapter1: Crystal Structure 1
Chapter1: Crystal Structure 1 University of Technology Laser Engineering & Optoelectronic Department Glass: 3 rd year Optoelectronic Engineering Subject: Solid state physics & material science Ass. Prof.
More informationDepartment of Materials Science and Engineering Massachusetts Institute of Technology 3.14 Physical Metallurgy Fall Exam I
Department of Materials Science and Engineering Massachusetts Institute of Technology 3.14 Physical Metallurgy Fall 2009 Exam I Monday, October 26, 2009 The Rules: 1) No calculators allowed 2) One hand
More informationLecture # 11. Line defects (1D) / Dislocations
Lecture # 11 - Line defects (1-D) / Dislocations - Planer defects (2D) - Volume Defects - Burgers vector - Slip - Slip Systems in FCC crystals - Slip systems in HCP - Slip systems in BCC References: 1-
More informationCrystal structure of the material :- the manner in which atoms, ions, or molecules are spatially.
Crystal structure A crystalline material :- is one in which the atoms are situated in a repeating or periodic array over large atomic distances. Crystal structure of the material :- the manner in which
More informationEFFECT OF STRESS & STRAIN ON FORMATION OF BAINITE IN STEELS
Hot Workability of Steels and Light Alloys Composites, editors H. J. McQueen, E. V. Konpleva and N. D. Ryan, Canadian Institute of Mining, Minerals and Petroleum, Montreal, Canada (1996) 543 556. EFFECT
More informationDetermining the fcc / bcc orientation relationship in plessite regions of iron meteorites
8 Determining the fcc / bcc orientation relationship in plessite regions of iron meteorites Question: Which model best characterises the fcc-bcc orientation relationship in plessite regions from meteorites?
More informationCalculation of high temperature parent orientation maps application to low carbon steels
LABORATOIRE D ETUDE DES MICROTEXTURES ET DE MECANIQUE DES MATERIAUX Calculation of high temperature parent orientation maps application to low carbon steels L. Germain, N. Gey, R. Mercier, M. Humbert 1
More informationinterphase interfaces (0-lattice/orientation relationship/habit plane/primary intrinsic dislocations)
Proc. Natl. Acad. Sci. USA Vol. 77, No. 4, pp. 1749-1753, April 1980 Chemistry Geometrical model for the energy of semicoherent interphase interfaces (0-lattice/orientation relationship/habit plane/primary
More informationMaterials and their structures
Materials and their structures 2.1 Introduction: The ability of materials to undergo forming by different techniques is dependent on their structure and properties. Behavior of materials depends on their
More informationModule #25. Martensitic Transformations and Strengthening
Module #25 Martensitic Transformations and Strengthening READING LIST DIETER: Ch. 6, pp. 226-228. Chapter 11 in Meyers & Chawla. Chapter 13 in P. Haasen, Physical Metallurgy, 3 rd Edition, Cambridge University
More informationCarbon nanostructures. (http://www.mf.mpg.de/de/abteilungen/schuetz/index.php?lang=en&content=researchtopics&type=specific&name=h2storage)
Carbon nanostructures (http://www.mf.mpg.de/de/abteilungen/schuetz/index.php?lang=en&content=researchtopics&type=specific&name=h2storage) 1 Crystal Structures Crystalline Material: atoms arrange into a
More informationStrengthening Mechanisms
Strengthening Mechanisms The ability of a metal/ alloy to plastically deform depends on the ability of dislocations to move. Strengthening techniques rely on restricting dislocation motion to render a
More informationEnergy and Packing. Materials and Packing
Energy and Packing Non dense, random packing Energy typical neighbor bond length typical neighbor bond energy r Dense, regular packing Energy typical neighbor bond length typical neighbor bond energy r
More informationMTEX A MATLAB Toolbox Tutorial Texture Analysis
MTEX A MATLAB Toolbox Tutorial Texture Analysis Ana María Fernández Blanco IMDEA Materials, Madrid 1. INTRODUCTION The MATLAB toolbox MTEX provides a unique way to represent, analyze and interpret crystallographic
More informationSupplementary Figure 1. Three-dimensional morphology of twins in magnesium alloys. The morphology of deformation twins is usually examined using
Supplementary Figure 1. Three-dimensional morphology of twins in magnesium alloys. The morphology of deformation twins is usually examined using two-dimensional microscopy such as optical microscope and
More informationCHAPTER 4 INTRODUCTION TO DISLOCATIONS. 4.1 A single crystal of copper yields under a shear stress of about 0.62 MPa. The shear modulus of
CHAPTER 4 INTRODUCTION TO DISLOCATIONS 4.1 A single crystal of copper yields under a shear stress of about 0.62 MPa. The shear modulus of copper is approximately. With this data, compute an approximate
More informationFive-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel
Philosophical Magazine ISSN: 1478-6435 (Print) 1478-6443 (Online) Journal homepage: http://www.tandfonline.com/loi/tphm20 Five-parameter crystallographic characteristics of the interfaces formed during
More informationTwo dimensional Bravais lattices
Two dimensional Bravais lattices Two dimensional Bravais lattices Square lattice Symmetries: reflection about both x and y rotations by 90 o,180 o Two dimensional Bravais lattices Rectangular lattice Square
More informationThe effect of different step-size on the visualization of crystallographic defects using SEM/EBSD technique
Int. Jnl. of Multiphysics Volume 9 Number 1 2015 37 The effect of different step-size on the visualization of crystallographic defects using SEM/EBSD technique Yoshikazu HIGA*, Ken SHIMOJIMA and Takashi
More informationCME 300 Properties of Materials. ANSWERS Homework 2 September 28, 2011
CME 300 Properties of Materials ANSWERS Homework 2 September 28, 2011 1) Explain why metals are ductile and ceramics are brittle. Why are FCC metals ductile, HCP metals brittle and BCC metals tough? Planes
More informationa. 50% fine pearlite, 12.5% bainite, 37.5% martensite. 590 C for 5 seconds, 350 C for 50 seconds, cool to room temperature.
Final Exam Wednesday, March 21, noon to 3:00 pm (160 points total) 1. TTT Diagrams A U.S. steel producer has four quench baths, used to quench plates of eutectoid steel to 700 C, 590 C, 350 C, and 22 C
More informationCombining symmetry operations
Combining symmetry operations An object can possess several symmetry elements Not all symmetry elements can be combined arbitrarily - for example, two perpendicular two-fold axes imply the existence of
More informationIntroduction to Engineering Materials ENGR2000 Chapter 3: The Structure of Crystalline Solids. Dr. Coates
Introduction to Engineering Materials ENGR2000 Chapter 3: The Structure of Crystalline Solids Dr. Coates Learning Objectives I 1. Describe difference in atomic/molecular structure between crystalline/noncrystalline
More information11.3 The analysis of electron diffraction patterns
11.3 The analysis of electron diffraction patterns 277 diameter) Ewald reflecting sphere, the extension of the reciprocal lattice nodes and the slight buckling of the thin foil specimens all of which serve
More informationMEMS 487. Class 04, Feb. 13, K.J. Hemker
MEMS 487 Class 04, Feb. 13, 2003 Materials Come As:!Amorphous Glasses, polymers, some metal alloys Processing can result in amorphous structures! Crystalline Single crystals Textured crystals Polycrystalline
More information9/29/2014 8:52 PM. Chapter 3. The structure of crystalline solids. Dr. Mohammad Abuhaiba, PE
1 Chapter 3 The structure of crystalline solids 2 Home Work Assignments HW 1 2, 7, 12, 17, 22, 29, 34, 39, 44, 48, 53, 58, 63 Due Sunday 12/10/2014 Quiz # 1 will be held on Monday 13/10/2014 at 11:00 am
More informationEngineering materials
1 Engineering materials Lecture 2 Imperfections and defects Response of materials to stress 2 Crystalline Imperfections (4.4) No crystal is perfect. Imperfections affect mechanical properties, chemical
More informationSupplementary Figure 1: Geometry of the in situ tensile substrate. The dotted rectangle indicates the location where the TEM sample was placed.
Supplementary Figures Supplementary Figure 1: Geometry of the in situ tensile substrate. The dotted rectangle indicates the location where the TEM sample was placed. Supplementary Figure 2: The original
More informationPlanar Defects in Materials. Planar Defects in Materials
Classification of Defects in Solids: Planar defects: Stacking faults o {311} defects in Si o Inversion domain boundaries o Antiphase boundaries (e.g., super dislocations): analogous to partials but in
More informationCopyright 2010 Tech Science Press CMC, vol.15, no.2, pp , 2010
Copyright 2010 Tech Science Press CMC, vol.15, no.2, pp.153-172, 2010 Spectral Approaches for the Fast Computation of Yield Surfaces and First-Order Plastic Property Closures for Polycrystalline Materials
More informationEx: NaCl. Ironically Bonded Solid
Ex: NaCl. Ironically Bonded Solid Lecture 2 THE STRUCTURE OF CRYSTALLINE SOLIDS 3.2 FUNDAMENTAL CONCEPTS SOLIDS AMORPHOUS CRYSTALLINE Atoms in an amorphous Atoms in a crystalline solid solid are arranged
More informationSolid State Device Fundamentals
Solid State Device Fundamentals ENS 345 Lecture Course by Alexander M. Zaitsev alexander.zaitsev@csi.cuny.edu Tel: 718 982 2812 Office 4N101b 1 Interatomic bonding Bonding Forces and Energies Equilibrium
More informationCrystallography. Duration: three weeks (8 to 9 hours) One problem set. Outline: 1- Bravais Lattice and Primitive
Crystallography Duration: three weeks (8 to 9 hours) One problem set Outline: 1- Bravais Lattice and Primitive 2- Cubic lattices, Simple, Body-centered and Face-centered 3- Primitive Unit Cell, Wigner-Seitz
More informationImperfections in the Atomic and Ionic Arrangements
Objectives Introduce the three basic types of imperfections: point defects, line defects (or dislocations), and surface defects. Explore the nature and effects of different types of defects. Outline Point
More information