Effective: 01/01/2016 PLB Viking 2016

Transcription

1 Effective: 01/01/2016 PLB Viking 2016

2

3 Twist Drills Jobber Length NAS 907B Heavy Duty 135º Split point Type 240-CN CN-TECH Cryo Nitride Type 240-UB Heavy Duty Ultra Bor Type 643-UB Metric *Type 278-UB 3/8" Shank Type 240-A Black Oxide *Type 248-A V-Line Black Oxide Type 240-AN TiN Coated Type 240-ACN Titanium Carbon Nitride Type 240-ALN AluminumTitanium Nitride *Type 240-GF GoldStrike 3-Flats *Type 240-GFR GoldStrike 3/8" RS * Not NAS 907B Mechanic Length 135º Split point Type 250-UB 3-Flats on Shank Type 258-UB 3/8" Shank Type QR-UB 1/4" Hex Shank Type 241-A V-line Black Oxide Jobber Length NAS 907A Type 340-A Black Oxide 118º Split point Jobber Length General Purpose 118º point Type 240-B Bright Finish Type 643-W Metric - Bright Finish Type 278 3/8" Reduced Shank Bright Finish... 5 Type 240-BN Titanium Nitride Coated Type 240 Black Oxide Type 643 Metric - Black Oxide Type 248 V-Line Black Oxide Type 230 Tang Drive Jobber Length Parabolic 135º Split Pt Type 240-P Black Oxide Type 240-PT Titanium Nitride Coated Jobber Length Hi-Helix 118º point Type 240-F Bright Finish Screw Machine Length NAS 907C Type 260-UB Type 260-T Black Oxide Type 260-TN Titanium Nitride Coated Type 260-TW Bright Finish Type 260-BN Titanium Nitride Coated *Type 260-QT 1/4" Reduced Shank * Not NAS 907B Screw Machine Length 118º point Type 260 Bright Finish /4" Shank 118º point Type 275 General Purpose Drill Blank Type 240-DB Fully Hardened - Precision Ground Jobber Length Cobalt NAS 907J Type 240-D Cobalt 135º Split point Type 240-DN Cobalt Titanium Nitride Type 240-AND Cobalt Titanium Aluminum Nitride.10 Type 643-D Cobalt Metric - 135º Split point. 28 DIN Length Wide Land Parabolic Cobalt Type XGT-J Cobalt 135º Split point Type XGT-JN TiN Cobalt 135º Split point Screw Machine Length Cobalt Type 260-D Cobalt 135º Split point Type 260-DN Cobalt TitaniumNitride Type 260-AND Cobalt Titanium Aluminum Nitride.19 Silver & Deming 1/2" Shank Type 280-UB Ultra Bor 135º Split point.. 24 Type 280-UBM Metric - 135º Split point Type 280-UBX 118º Split point 3 - Flats Type 280-MRO Mechanic Length 135º SP.. 25 Type º point - Round Shank.. 25 Type 280-D M42 135º Split point Type Ext Extension OAL 7-1/ TABLE OF CONTENTS Silver & Deming 3/4" Shank Type 281-UB 135º Split point - Round Shank. 24 Taper Length Type º pt. - General Purpose Type º point - Tang Drive Type 221-P Parabolic - Tang Drive Type 221-PT Titanium NitrideCoated 135º SP Extra Length Type XGT-UB Ultra Bor 6" 9" 12" Type " - OAL 9" Flute Type " - OAL 12" Flute Aircraft Extension Type 211 6" - OAL Black Oxide Type 209-D 6" - OAL Cobalt NAS 907 J Type "- OAL Black Oxide Type 213-D 12" - OAL Cobalt NAS 907 J Taper Shank Type 510 Regular Shanks Type 520 Larger than Standard Type 500 Smaller than Standard Tap & Dies HSS Spiral Point Taps Type 20-UB / Machine Screw Type 20-UBN / Machine Screw Type 20 / Machine Screw Type 21-UB Metric Type 21-UBN Metric Type 21 Metric HSS Straight Flute Hand Taps Type 23-UB Taper Type 23-UBN Taper - Titanium Coated Type 23 Taper Type 24-UB Plug Type 24-UBN Plug - Titanium Coated Type 24 Plug Type 25-UB Bottoming Type 25-UBN Bottoming - Titanium Coated Type 25 Bottoming SETS: Type 26-UB, 26-UBN, Type METRIC - HSS Straight Flute Hand Type 31-UB Taper Type 31-UBN Taper - Titanium Coated Type 31 Taper Type 32-UB Plug Type 32-UBN Plug - Titanium Coated Type 32 Plug Type 33-UB Bottoming Type 33-UBN Bottoming - Titanium Coated Type 33 Bottoming SETS: Type 35-UB, 35-UBN, Type HSS Straight Flute-Left-Hand Thread Type 23L-UB Taper Type 24L-UB Plug Type 25L-UB Bottoming HSS Combination Drill & Tap Type 40-UB Type 40-QR CARDED - Drill & Tap Combo Type 34-UB HSS Hexagon Dies Type 27-UB Type 27-UB Metric Reduced Neck Type 29-UB Gold Oxide Type 29-UBN Titanium Nitride Coated Type 29-ACN Titanium Carbon Nitride Type 29-ALN AluminumTitanium Nitride M42 Cobalt Taps & TiN Coated Type 24-RNC Cobalt Gold Oxide Type 24-RNCN Cobalt Titanium Nitride Regular - Taper Pipe Taps Type 30-UB Gold Oxide Type 30-UBN TiN Coated Type 30-B Black Oxide Type 30 Bright Finish Interrupted - Taper Pipe Taps Type I30-UB Gold Oxide Type I30-UBN TiN Coated Type I30-B Black Oxide Type I30 Bright Finish HSS Tap & Drill Sets SF-18TDC Straight Flute SF-18TDF Straight Flute SF-10TD Straight Flute SP-12TD Spiral Point SP-18TD Spiral Point SP-18TDM Metric Spiral Point B-18TD 118º Point Drill Maint HSS Tap Sets SP-19T Spiral Point - Type 20-UB SP-10T Spiral Point - Type 20-UB SF-10T Straight Flute - Type 24-UB Drill, Tap Countersink Sets TDC HSS Tap & Die Assortments 14 pc, 23pc Metric - Spiral Point pc. Spiral Point pc. Spiral Point pc, 58 pc Straight Flute Hi-Carbon Steel Taps Type 720 Plug Type 721 Plug - Machine Screw Type 740 Taper Type 741 Plug - Machine Screw Type 760 Bottoming Type 761 Bottoming - Machine Screw Type pcs - Set Type pcs - Machine Screw Type 780 Metric Plug Taps Hi-Carbon Steel Pipe Taps Type Hi-Carbon Steel Dies Type 400 Round - Machine Screw Type 405 Hex - Machine Screw Type 415 Round Adjustable - Machine Screw Type 790 Metric - Hex Die Hi-Carbon Tap & Die Sets Type pc, 16 pc pc, 37 pc & 40 pc Tap & Reamer Wrenches / Die Stocks Type 725, 726, Type 727R Ratcheting T-Handle Type 728 Economy Solid Type 729 Professional Quality Type 730 Screw Pitch Gauges Annular Cutters Spira-Broach Type15 & 15L M42 Cobalt Type14 & 14L M35 Cobalt Type13SP & 13LSP M2 HSS High-Speed Steel - Counter Display Annular Cutters Sets Counter Displays Magnetic Drill Presses MBD 4500, MBD MBD 6500, MBD Specialty Tools Acrylic Drills Type 183-UB Chipfree point Auger Bits - Heavy-Duty Carbide Type ", ", " Auger Bits - General Type 950-9", " " & ".. 50 Bell Hanger Bits Type 601 Carbide Tipped Bolt Extractors Type 420 Spiral Style Type 421-UB Square Style Bolt Extractors Set

4 TABLE OF CONTENTS Brad Point Drills Type 16-UB Jobber Length Burrout. 51 Type 16-UB Sets Carbide Tipped Holecutters Type CHC-UB Cut up to 3/ Type CHD-UB Cut up to Type CHC-QR pc. CHC-AG Set Type Ext Extension OAL 6-1/ Hanging Display for CHC-QR Countersinks Type 82-UB Chatterproof Type 90-UB Deburring Tools Combined Drills & Countersinks Type 296 Plain Type Cutting Tool Lubricant Type 11-UB Ultra S/P , 3, 7, 19 Glass & Tile Drills Type Hard Steel Drills Type 602 Carbide Tipped Type 602-C Solid Carbide Reamers Type 50-UB Car Reamers Type 51-UB Car Reamers Type 52-UB Hex Bridge length Type 53-UB Hex Car length Type 54-UB Taper Shank Type 55-UB Taper Shank Type 284-UB Hole-Hog Type 284-UB Hole Hog Sets Left-Hand Spiral Drills Type 240-AL Type 240-AL Sets Pilot Drills Type 491 HSS 135º split point Power Bits Type 935 Quick Release Type QR-UB Extension 3", 6", 12" Sheeters Drills Type 213 Black Oxide 135º split point Step Drills - Multi - Diameter Type 78-UB, 78-UBN Type 78-QR, 78-QRN Quick Release Step Drill Sets Twin End Drills Type 490-G 135º Split point Type º Split point Heavy Duty.. 51 Weldout Spotweld Type 492-D Weldout Spotweld Type 493-D Weldout Spotweld Type 493-DN TiN Coated Type 493-DB Carbide ALTiN Coated Type 493-D WO-4 Set Type 492-D WO-6 Set Premium Carbide Burrs SA, SB, SC Cylinder Shape SD Ball Shape, SE Oval/Egg Shape SF Tree Shape, SG Pointed Tree Shape 55 SJ 60º Cone Shape, SH Flame Shape.. 55 SK 90º Cone Shape, SL Taper Shape.. 55 SM Pointed Cone Shape SN Inverted Cone Shape Double Cut Burr Sets Double & Aluma Cut Burr Displays Cutting Tool Sets Jobber Length NAS 907B Heavy Duty 135º Split point Type 240-UB Heavy Duty Ultra Bor Type 240-CT CN-Tech Cryo Nitride Type 643-UB Metric *Type 278-UB 3/8" Shank Type 240-A Black Oxide *Type 248-A V-Line Black Oxide Type 240-AN Titanium Coated Type 240-ACN Titanium Carbon Nitride Type 240-ALN AluminumTitanium Nitride *Type 240-GF GoldStrike 3-Flats *Type 240-GFR GoldStrike 3/8" RS * Not NAS 907B Mechanic Length 135º Split point Type 250-UB 3-Flats on Shank Type 258-UB 3/8" Reduced Shank Type QR-UB 1/4" Hex Shank Type 241-A V-line Black Oxide Jobber Length General Purpose 118º Type 240-B General Purpose Bright Finish.. 57 Type 278 V-Line 3/8" RS Bright Finish Type 240-BN Titanium Nitride Coated Type 240 General Purpose Black Oxide.. 56 Type 643 Metric - Black Oxide Type 248 V-Line Black Oxide Jobber Length Parabolic 135º Split Pt Type 240-P Heavy Duty Black Oxide Type 240-PT Titanium Nitride Coated Screw Machine Length NAS 907C Type 260-UB Black & Gold Type 260-T Black Oxide Type 260-TN Titanium Nitride Coated * Not NAS907C Screw Machine Length 118º point Type 260 Bright Finish /4" Shank 118º Type 275 General Purpose Jobber Length Cobalt NAS 907J Type 240-D 135º Split point Type 240-DN Titanium NitrideCoated Type 643-D Metric - 135º Split point Silver & Deming 1/2" Shank Type 280-UB 135º Split point Type 280-UBX 118º Split pt 3-Flats Type 280-MRO 135º Split Point Type º point - Round Shank.. 58 Step Drills Type 78-ACN Titanium Carbon Nitride Type 78-UB Gold Oxide Type 78-UBN Titanium NitrideCoated Type 78-QR Quick Release Gold Oxide.. 51 Type 78-QRN Quick Release TiN Coated.. 51 Acrylic Drills Type 183-UB Super ChipFree point Combination Drill & Tap Type 40-UB Type 40-QR Weldout Spotweld Type 493-D WO Type 492-D WO Left Hand Spiral Type 240-AL Broken Bolt Remover Combo. 48 Brad Point Drills Type 16-UB Burrout Jobber Length Tap & Drills B-18TD 118º Point Drills Maint SP-18TD Spiral Point SP-18TDM Metric Spiral Point SP-18TDF Spiral Point SP-12TD Spiral Point SF-18TDC Straight Flute SF18TDF Straight Flute SF-10TD Straight Flute Bolt Extractor BR-8 Left Hand Drill Bolt Extractor BR-10 Left Hand Drill Bolt Extractor BR-8SQ Left Hand - Bolt Extractor SQE-4 Bolt Extractor - Spiral Extractor ChatterProof Countersink Type 82-UB Countersink Type 90-UB Deburring Tools Hole Expansion Tools Type 50-UB Standard Flute Type 51-UB Fast Spiral Hole Hog Type 284-UB 1/2 Shank 4-Flute core Type 284-UB Sets Carbide Hole Cutters Type CHC-UB & CHD-UB Type CHC-QR Cabinets,Displays & Indexes Annular Cutter - Sets Spira-Broach. 59 Counter Displays Annular Cutter 5 pcs Reamers 8 pcs. Standard or Fast Spiral. 59 Silver & Deming 8 pcs. 1/2 Shank Stock Master Dispensers & Displays Type pcs Display Packages Type 250-UB Carded Mechanics Length Drill 14 Drill Gauges Type 914 Letter, & Drill Stand Type 914 Letter, & Indexes Type 901 Indexes Only Type 901 Black Indexes - ID Plate Slot Master Drill Dispensers Type 914 U.S. & Metric Sizes Silver & Deming - Cabinets Type Stocking Cases Type pcs. Silver & Deming , pcs. Letter Drills Assortment pcs. Metric Assortment pcs. Drills Assortment pcs. Gauge Drills Assortment Carbide Holecutter - Display Type CHC-UB Carbide Tipped Holecutter Stocked Counter - Displays Carbon Steel - Tap & Round Dies Carbon Steel - Tap & Hexagon Dies Stocked Countertop - Displays 53-SF 53 pcs. Straight Flute Taps & Hex Dies SP 55 pcs. Spiral Point Taps & Hex Dies Tap & Drill Assortments 67-SP 67pcs. Spiral Point Taps & Jobber SP 123pcs. Spiral Point Taps & Jobber SF 123pcs. Spiral Point Taps & Jobber Under-Mount Dispensers Type 914,, Letter & Empty Index found on pages 62

5 Price List Jobber Length Drills Ultra Bor Super Premium HSS Heavy-Duty NAS 907B Type 240-CN CN-TECH Nitride135 Split Point Cryogenic treatment creates a more uniform grain structure by transforming retained austenite into martensite. Modifies the carbon micro-structure through precipitation of carbides increasing resistance to wear. Nitride process diffuses nitrogen into the surface to create a case hardening resulting in superior tool life and exceptional corrosion resistance. # Size Price /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $20.18 Sets CT-13 $ CT-15 $ CT-15P Red Ultra Dex $ CT-29 $ CT-29P Red Ultra Dex $ HSS Heavy-Duty NAS 907B Type 240-UB Ultra Bor Super Premium 135 Split Point Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without a center punch. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance. Size Price /16 $ /64 $ /32 $ /64 $ /8 $ /64 $2.15 Proudly Manufactured in the U.S.A. Order: (continued) /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $40.86 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $13.85 # Size Price $ $ $ $ $ $3.59 # (continued) Size Price $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.87 Type 240-UB CARDED Size Price /16 $ /64 $ /32 $ /64 $ /8 $6.80 (3 per card thru 1/8) /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $7.85 (2 per card thru 1/4) Size Price /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $14.76 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 1

6 Jobber Length Drills Reduced Shank, Heavy-Duty HSS Heavy-Duty NAS 907B Type 240-UB Sets/Displays 135 Split Point Black & Gold Ultra Bor Super Premium SP-13 $ SP-15 $ SP-21 $ SP-26 $ SP-29 $ SP-29P (Ultra Dex) $ SP-29PO $ Blaze Orange (Ultra Dex) SP-60 $ SP-115 $ Piece Countertop Display SP $1, Drills - 96 pc. Stocking Case SP $ Gauge Drills pc. Stocking Case SP $ Letter Drills - 72 pc. Stocking Case SP $ /8" Reduced Shank Type 278-UB 135 Split Point Ultra Bor Super Premium Drill is a Type 240-UB with a 3/8" reduced shank. Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without center punch /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /32 $ /16 $ /32 $ /8 $39.42 Proudly Manufactured in the U.S.A. Order: Price List # Size Price /64 $ /32 $ /64 $ /16 $14.52 Type 278-UB CARDED # Size Price /64 $ /32 $ /64 $ /2 $ /8" Reduced Shank Type 278-UB Sets Black & Gold Split Point Heavy-Duty Super Premium RSP-15 $ RSP-29 $ RSP-29P (Ultra Dex) $ RSP-29PO - Blaze Orange $ SP-21R $135.6 HSS Heavy-Duty NAS 907B Type 240-A Heavy-Duty - Black Oxide 135 Split Point 135 split point drill is self centering and requires less thrust in drilling harder metal than a general purpose drill. Recommended for medium hardness metal drilling applications. Size Price /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $13.46 Letter # Size Price A $ B $ C $ D $ E $ F $ G $ H $ I $ J $4.77 Letter (continued) # Size Price K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $12.60 # Size Price $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.69 Continued Type 240-A Sets/Displays on page 3 2 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack.

7 HSS Heavy-Duty NAS 907B Type 240-A Sets/Displays Jobber Length - Heavy-Duty 135º Split Point, Black Oxide Black A-10 $ A-11 $ A-13 $ A-15 $ A-21 $ A-26 $ A-29 $ A-29P $ A-60 $ A-115 $ Black Oxide Split Point PL-7A $ PL-10A $ PL-13A $ PL-14A $ Piece Assortments HD $1, Drills - 96 Piece Assortment HD $ Gauge Drills Piece Assortment HD $ Letter Drills - 72 Piece Assortment HD $ Type 240-GF Goldstrike 135 Split Point Premium 3-Flats on Shank with Flats, 3/16 & Larger Gold Surface Treated Heavy-duty 135 split point drills perform well in very demanding applications. The flats on the shank give positive chuck grip. Drills are ideal for use with hand held drills with keyless chucks /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $3.76 Price List /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $13.90 Type 240-GF Sets/Displays Gold-Strike - 3-Flats on Shank 3/16" and Larger GF-13 $ GF-15 $ GF-21 $ GF-29 $ GF-29P (Ultra Dex) $ Piece Assortments GF $1, Type 240-GFR 135 Split Point 3/8" Reduced Shank with Flats - Gold Surface Treated /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $16.36 Type 240-GFR Sets Same as Type 240-GF except with 3/8'' reduced shanks GF-21RS $ GF-29RS $ GF29RSP $ Proudly Manufactured in the U.S.A. Jobber Length Drills Goldstrike & V-line Type 248-A V-line - Heavy-Duty - Black Oxide 135 Split Point These 135 split point drills are self centering and perform well in harder metals. The heavy-duty construction makes this series of drills ideal for the medium to light tensile strength metal drilling applications. American made value line drill /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $10.36 Type 248-A Sets V-line - Heavy-Duty - Black Oxide 135 Split Point SA-13 $ SA-15 $ SA-21 $ SA-29 $ Cutting Tool Lubricant Type 11-UB Ultra S/P Super Premium Super concentrated no run formula. Clings to vertical surfaces for continual lubrication. Rich gold color and thick consistency gives a quality appearance not available with thin runny fluids. Virtually smoke free in even the most heat prone applications. Contains no ozone depleting substances. This fluid will extend tool life and yield a super smooth machined finish oz. $4.97 ea oz. $4.73 ea oz. $15.19 ea Display/ 8-4 oz. $40.36 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 3

8 Jobber Length Drills General Purpose General Purpose Type 240-B General Purpose - Bright Flute 118 Point - High-Speed Steel This 118 point, high-speed steel drill performs well in a wide variety of drilling applications. Recommended for non-ferrous metals, wood and plastics /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /4 $39.40 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $7.63 Price List Letter U $ V $ W $ X $ Y $ Z $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $30.58 Type 240-B Sets/ Displays General Purpose - Bright Flute 118 Point - High-Speed Steel J-10 $ J-11 $ J-13 $ J-15 $ J-20 $ J-21 $ J-26 $ J-29 $ J-60 $ J-115 $ Plastic Case PL-7 $ PL-10 $ PL-13 $ Piece Assortments BR $1, Drills - 96 Piece Assortment BR $ Gauge Drills Piece Assortment BR $ Letter Drills - 72 Piece Assortment BR $ Proudly Manufactured in the U.S.A. Order:

9 1/4" Reduced Shank Type Point - General Purpose Bright Finish - Shorter than Jobber Length 118 point high-speed-steel drill is designed for use in portable air and electric drilling equipment with 1/4" chucks. The shorter than jobber length greatly increases rigidity and improves drilling performance /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $15.87 Type 275 Sets 118 Point - General Purpose Bright Finish - Shorter than Jobber Length Q-15 $ Q-29 $ /8" Reduced Shank Type Point General Purpose - Bright Finish High-Speed Steel This general purpose 118 point high-speed steel drill is designed for use in portable air or electric drilling equipment with 3/8" chucks. Note: Surface treated flutes on sizes larger than 1/2" /64 $ /32 $ /64 $ /64 $ /64 $ /16 $ /32 $ /2 $ /32 $ /16 $ /32 $ /8 $36.45 Type 278 Sets 118 Point General Purpose - Bright Finish High-Speed Steel R-15 $ R-29 $ R-29P (Ultra Dex) $ R-115 $ Price List Type Point - HSS General Purpose - Black Oxide This 118 point, high-speed steel drill performs well in a wide variety of ferrous metal drilling applications. The black surface treatment prevents chip welding and increases abrasion resistance /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /4 $39.40 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $6.26 Jobber Length Drills General Purpose, Reduced Shank Type 240 continued 118 Point - HSS General Purpose - Black Oxide Letter S $ T $ U $ V $ W $ X $ Y $ Z $11.93 Proudly Manufactured in the U.S.A. Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 5

10 Jobber Length Drills General Purpose, V- line Price List Type Point - HSS General Purpose - Black Oxide $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.51 (continued) (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $3.98 Type 240 Sets/Displays Black Oxide - General Purpose B-10 $ B-11 $ B-13 $ B-15 $ B-20 $ B-21 $ B-26 $ B-29 $ B-60 $ B-80 $ B-114 $ B-115 $ Piece Assortments BL $1, Drills - 96 Piece Assortment BL $ Gauge Drills Piece Assortment BL $ Letter Drills - 72 Piece Assortment BL $ Type 248 V-line Point General Purpose - Black Oxide These general purpose drills are ideal for a wide variety of light tensile strength metal drilling applications. This series is designed for the user whose applications are well served without the need for the tighter tolerances of our standard Type 240. American made value line drill /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $9.76 Type 248 Sets V-line Point General Purpose - Black Oxide SJ-13 $ SJ-15 $ SJ-21 $ SJ-29 $ Proudly Manufactured in the U.S.A. Order: Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack.

11 Price List Jobber Length Drills Automotive Series, Fast Spiral Automotive Series Tang Drive Type 230 General Purpose -118 Point Black Oxide This is a standard jobber length drill with a tang for use with A.S.A. split sleeve drill drivers /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $41.26 Cutting Tool Lubricant Type 11-UB Ultra S/P Super Premium Super concentrated no run formula. Clings to vertical surfaces for continual lubrication. Rich gold color and thick consistency gives a quality appearance not available with thin runny fluids. Virtually smoke free in even the most heat prone applications. Contains no ozone depleting substances. This fluid will extend tool life and yield a super smooth machined finish oz. $4.97 ea oz. $4.73 ea oz. $15.19 ea Display/ 8-4 oz. $40.36 High Helix Fast Spiral Type 240-F Bright Finish 118 Point - High-Speed Steel This 118 point, high-speed steel drill performs well in deep hole drilling of low tensile strength material such as aluminum, zinc, copper, wood, refrigeration die castings, auto hardware, slate & epoxy based plastics. Also use to drill free machining steels, brasses & bronzes /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $13.94 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $4.45 Proudly Manufactured in the U.S.A. Order :

12 Jobber Length Drills Heavy-Duty, TiN Coated Price List 8 Parabolic Flute Type 240-P Heavy-Duty Split Point - Black Oxide Parabolic flute drills are designed to allow deep hole drilling without frequent drill removal to clear chips. These drills perform best in low to medium tensile strength materials. The split point and heavy-duty design provides superior performance by permitting higher feed rates and continuous drilling of deep holes /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $2.14 (Continued) $ $ $ $ $ $ $ $ $ $2.13 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $14.22 Type 240-P Sets Heavy-Duty Split Point - Black Oxide P-13 $ P-15 $ P-21 $ P-29 $ Parabolic Flute Type 240-PT Heavy-Duty - Parabolic Flute 135 Split Point - TiN Coated This exceptional high performance drill with the super hard TiN coating, may extend tool life 500% or more in very abrasive drilling applications. The parabolic flutes eliminate the need for frequent drill removal in deep hole drilling /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $6.88 (Continued) /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $3.92 Letter A $ B $ C $ D $ E $ F $ G $11.02 Continued Type 240PT -Letter on page 9. Tin Coated thru 9/32 = 3 per pack. 19/64 thru 1/2 = 6 per pack.

13 Parabolic Flute Type 240-PT Heavy-Duty - Parabolic Flute 135 Split Point - TiN Coated Letter H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $21.30 Type 240-PT Sets Heavy-Duty - Parabolic Flute 135 Split Point - TiN Coated PT-13 $ PT-15 $ PT-21 $ PT-29 $ M42 Cobalt NAS 907J Type 240-D 135 Split Point - Heavy-Duty Heavy-duty 135 split point with gold finish for use in drilling hard tough metals, free machining stainless steel, high temperature alloys, titanium and certain plastics. Manufactured to NAS 907J specifications /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $22.66 Price List M42 Cobalt NAS 907J Type 240-D 135 Split Point - Heavy-Duty Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $18.21 Jobber Length Drills M42 Cobalt, Heavy-Duty, Gold Finish continued $ $ $ $ $ $ $ $ $ $ $ $ $ $ $2.53 M42 Cobalt NAS 907J Type 240-D 135 Split Point - Heavy-Duty Heavy-duty 135 split point with gold finish for use in drilling hard tough metals, free machining stainless steel, high temperature alloys, titanium and certain plastics. Manufactured to NAS 907J specifications D-13 $ D-15 $ D-21 $ D-26 $ D-29 $ D-29P (Ultra Dex) $ D-60 $ D-115 $ $ $ $ Piece Countertop Displays $ $ $ D $1, $4.23 Drills - 96 Piece Assortment $ $ D $ $ $4.61 Titanium Nitride NAS 907J $ $3.94 Type 240-DN $ Split Point - Heavy-Duty $4.03 Heavy-duty 135 split point with gold finish for use in $3.75 drilling hard tough metals, free machining stainless $3.69 steel, high temperature alloys, titanium and certain plastics $3.37 Manufactured to NAS 907J specifications $ $ $ $ $ $ /16 $ $ /64 $ $ /32 $ $ /64 $ $ /8 $ $ /64 $ $ /32 $ $ /64 $ $ /16 $ /64 $ $ /32 $ $ /64 $ $ /4 $ $ /64 $ $ /32 $ $ /64 $ $ /16 $ $ /64 $ $ /32 $ $ /64 $ $ /8 $ $ /64 $ $ /32 $21.64 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 9

14 10 Jobber Length Drills M42 Cobalt, Titanium Nitride & Titanium Aluminum Nitride Titanium Nitride NAS 907J Type 240-DN 135 Split Point - Heavy-Duty /64 $ /16 $ /64 $ /32 $ /64 $ /2 $29.18 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ #1 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $4.22 Price List Titanium Nitride NAS 907J Type 240-DN 135 Split Point - Heavy-Duty $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $4.59 Type 240-DN Sets 135 Split Point - Heavy-Duty DN-13 $ DN-15 $ DN-21 $ DN-26 $ DN-29 $ DN-60 $ DN-115 $1, Titanium Aluminum Nitride NAS 907J Type 240-AND 135 Split Point - Heavy-Duty For use where extreme temperatures are found, allows for increased machining speeds up to 200%. Can be used in machining stainless steels, nickel based and titanium alloys, not recommended for aluminum /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $35.02 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ #1 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $4.93 Continued Type 240-AND - on page 11

15 Titanium Aluminum Nitride NAS 907J Type 240-AND 135 Split Point - Heavy-Duty continued $ $ $ $ $ $ $ $ $ $5.51 HSS Heavy-Duty NAS 907B Type 240-AN TiN Coated Split Point - Titanium nitride coated, heavy-duty, 135 split point drills perform well in very demanding applications. The TiN coating provides a super hard surface with high lubricity. The tool life may be extended 500% or more in high wear or very abrasive drilling applications. Manufactured to NAS 907B specifications /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $22.38 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $12.92 Tin Coated thru 9/32, L, #52 = 3 per pack, 19/64 thru 1/2 = 6 per pack. Jobber Length Drills TiN Coated, Titanium Carbon Nitride - Heavy Duty Letter P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $3.66 HSS Heavy-Duty NAS 907B Type 240-AN TiN Coated Split Point AN-13 $ AN-15 $ AN-21 $ AN-29 $ AN-29PO $ Blaze Orange Ultra Dex AN-60 $ AN-115 $1, HSS Heavy-Duty NAS 907B Type 240ACN Titanium Carbon Nitride (TiCN) 135 Split Point TiCN is harder and has a lower coefficient of friction than the TiN coating. Manufactured to NAS 907B specifications /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $24.58 Letter A $ B $ C $ D $ E $ F $ G $ H $ LTR-I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $23.50 Continued Type 240ACN - on page 12 11

16 Jobber Length Drills Titanium Carbon Nitride, Titanium Aluminum Nitride Heavy-Duty HSS Heavy-Duty NAS 907B Type 240ACN Titanium Carbon Nitride (TiCN) 135 Split Point TiCN is harder and has a lower coefficient of friction than the TiN coating. Manufactured to NAS 907B specifications HSS Heavy-Duty NAS 907B Type 240ALN Titanium Aluminum Nitride (TiAIN) 135 Split Point Designed for use in high temperature operations and difficult to machine material. Manufactured to NAS 907B specifications $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $4.14 HSS Heavy-Duty NAS 907B Type 240ACN Titanium Carbon Nitride (TiCN) 135 Split Point TiCN-15 $ TiCN-21 $ TiCN-29 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $24.58 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $4.14 HSS Heavy-Duty NAS 907B Type 240ALN SETS Titanium Aluminum Nitride (TiAIN) 135 Split Point ALN-15 $ ALN-21 $ ALN-29 $364.71

17 Jobber Length Drills HSS Black Oxide 118º Split Point, TiN Coated General Purpose HSS Black Oxide118º Split Point - NAS 907A Type 340-A 118º split point is self-centering for reduced thrust and easier penetration. Black oxide finish for increased wear resistance and added lubricity. Manufactured to NAS 907A aerospace specification. TiN Coated - General Purpose Type 240-BN 118 Point Titanium nitride coated, general purpose construction, 118 point performs well in mild drilling applications with strong abrasive wear characteristics. The tool life may be extended 500% or more in these high wear applications /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $13.46 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /4 $64.46 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $19.73 Continued Type 240-BN - on page

18 Jobber Length, Mechanic & Screw Machine Length Drills TiN Coated, Ultra Bor Super Premium 14 TiN Coated - General Purpose Type 240-BN 118 Point $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $5.04 Type 240-BN Sets 118 Point BN-13 $ BN-15 $ BN-26 $ BN-29 $ BN-60 $ BN-115 $ Mechanic Length Drills Type 250-UB Ultra Bor Super Premium 3-Flats on Shank Split Point Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without center punch. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance 3-Flats on Shank /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $15.80 Type 250-UB CARDED /16 $ /64 $ /32 $ /64 $ /8 $6.16 (3 per card thru 1/8) /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $8.10 (2 per card thru 1/4) /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $15.59 Type 250-UB Sets/ Displays Mechanic Length Black & Gold Ultra Bor Super Premium 3-Flats on Shank 3/16 & Larger 135 Split Point Mechanic Length # Size Price SPM-13 $ SPM-15 $ SPM-21 $ SPM-29 $ SPM-29P (Black Ultra Dex) $ SPM-29PO (Orange Ultra Dex) $ Piece Countertop Displays # Size Price SPM $1, Drills - 96 Piece Assortment # Size Price SPM $ Display Packages Type 250-UB Mechanic Length Drills Ultra Bor Super Premium Super premium drills in attractive, strong selling displays. The complete super premium drill feature/ benefit story is printed on the cards. Display prices are 15% lower than the combined prices of individual drills. 1/16 thru 1/8 sizes are packed 3 per card and 9/64 thru 1/4 are packed 2 per card. 250-UB drills with flatted reduced shanks are used where indicated. Display No. DC145SP DC145SP $ Display No. DC116SP DC116SP $ Display No. DC72SP DC72SP $ Proudly Manufactured in the U.S.A. Tin Coated thru 9/32, L, #52 = 3 per pack, 19/64 thru 1/2 = 6 per pack.

19 Mechanic Length Drills Type 258-UB 3/8" Reduced Shank 3-Flats on Shank Split Point Ultra Bor Super Premium Drill is a Type 250-UB with a 3/8" reduced shank. Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without center punch. 3-Flats on Shank - 3/8" Shank /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $19.49 Type 258-UB Carded /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $20.46 Type 258-UB Sets/Displays Ultra Bor Super Premium Reduced Shank Mechanic Length - Reduced Shank RSPM-15 $ SPM-21R $ RSPM-29 $ RSPM-29P (Black Ultra Dex) $ RSPM-29PO (Orange Ultra Dex) $ Piece Assortments # Size Price RSPM $1, Drills - 96 Piece Assortment # Size Price RSPM $ Type QR-UB 1/4'' Hex Shank Quick Release Drills Split Pt. - Ultra Bor Super Premium Drill is a Type 250-UB with a quick release shank. Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without center punch. Body & clearance treated for maximum lubricity. Especially designed for hand held drills. Adaptor eases changing of cutting tools. -6 per pack thru 1/4-3 per pack 9/32 thru 1/2 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. Mechanic & Screw Machine Length Drills Ultra Bor, Quick Release, Heavy-Duty, CAD-HD Series QR-UB 1/4'' Hex Shank /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /2 $ Quick Release Adaptor $19.73 QR-UB 1/4'' Hex Shank Carded /16 $ /32 $ /8 $ /32 $ /16 $13.80 (2 per card) /32 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /2 $ Quick Release Adaptor $19.73 (1 per card) Type QR-UB Sets 1/4'' Hex Shank - Quick Release Drills 135 Split Pt. Ultra Bor Super Premium QR 12-UB Hard Case - Index /16, 3/32, 1/8, 5/32, $ /16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2 & Quick Release Adaptor QR 16-UB Soft Pouch - Index /16, 3/32, 1/8, 5/32, $ /16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 & Quick Release Adaptor QR 7A-UB Soft Pouch - Index /16, 3/32, 1/8, 5/32 $ /16, 7/32, 1/4 Sets QR-7A and QR-7B do not include Quick Release Adaptor QR 7B-UB Soft Pouch - Index /8, 3/16, 1/4, 5/16 $ /8, 7/16, 1/2 Sets QR-7A and QR-7B do not include Quick Release Adaptor Type 241-A V-line - Black Oxide CAD-HD Series 135 Split Point Advances in drill making technology allow us to make excellent drills for those very price sensitive portions of the business. The mechanic length yields a sturdier drill w/ less flexing. This resistance to flexing provide longer life than other drills in many applications. CAD-HD /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $10.00 Type 241-A Sets CAD-HD Heavy-Duty Black Oxide CAD-HD CAD-13A $ CAD-15A $ CAD-21A $ CAD-29A $ Type 260-UB Ultra Bor Super Premium 135 Split Point - Gold Surface Special Hi-Moybdenum tool steel. Gold surface treated body and clearance for maximum lubricity. Heavy-duty construction, 135 split point, no center punch needed - will not walk /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $3.20 Continued Type 260-UB on page

20 Screw Machine Length Drills Ultra Bor Super Premium, Heavy-Duty 16 Screw Machine Length Drills Type 260-UB (Continued) /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.87 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $12.30 Proudly Manufactured in the U.S.A. Type 260-UB Sets Screw Machine Length Black & Gold Ultra Bor Super Premium SPT-26 $ SPT-29 $ SPT-60 $ Type 260-QT 1/4" Shank Split Point Heavy-Duty - High-Speed Steel This high-speed steel. drill is recommended for "punch" drilling in hard, tough sheet metal applications where quick and accurately located holes are required. 1/4" Shank /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $14.18 Type 260-T Heavy-Duty 135 Split Point - Black Oxide A sturdy drill for use in portable power drilling. Accurate centering, fast penetration. Ideal for sheet metal work. NOTE: Sizes smaller than #52 are not split pointed. For bright finish see Type 260-TW on page /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $4.30 Continued Type 260-T on page 17 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack.

21 Screw Machine Length Drills General Purpose Screw Machine Length Drills Type 260-T (Continued) /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.69 Type 260-T Sets Screw Machine Length Treated Black 135ºSplit Point - Heavy-Duty T-10 $ T-11 $ T-13 $ T-21 $ T-29 $ T-60 $ Type 260-TW Heavy-Duty Split Point Bright Finish A sturdy drill for use in portable power drilling. Accurate centering, fast penetration. Ideal for sheet metal work. Polished Finish NOTE: Sizes smaller than #52 are not split pointed /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ #1 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.69 Proudly Manufactured in the U.S.A. Order: Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 17

22 Screw Machine Length Drills HSS - General Purpose Screw Machine Length Drills Type 260 HSS - General Purpose Point - Short Length Bright-Flute thru 3/4" diameter. Surface treated flutes over 3/4" diameter. The short length of drill and flute makes this an especially rigid drill for greater drilling accuracy. Can be used for all screw machine operation. This drill is designed for ease of penetration and to facilitate chip removal in tough, hard materials /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $10.25 Proudly Manufactured in the U.S.A $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.48 Type Sets HSS - General Purpose Point - Screw Machine Length SM-29 $ SM-60 $ Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack.

23 Type 260-D M42 Cobalt - HSS 135 Split Point - Gold Finish Heavy-Duty Heavy-duty 135 split point with gold finish made to aircraft specifications. Use to drill hard, tough metals, free machining stainless steel, titanium alloys and certain abrasive plastics /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /4 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $2.57 Cutting Tool Lubricant Type 11-UB Ultra S/P Super Premium Super concentrated no run formula. Clings to vertical surfaces for continual lubrication. Rich gold color and thick consistency gives a quality appearance not available with thin runny fluids. Virtually smoke free in even the most heat prone applications. Contains no ozone depleting substances. This fluid will extend tool life and yield a super smooth machined finish oz. $4.97 ea oz. $4.73 ea / 4 oz. $15.19 ea Display / 8-4 oz. $40.36 Screw Machine Length Drills Cobalt, TiN Coated & Tianium Aluminum Nitride Type 260-DN M42 Cobalt - HSS 135 Split Point - TiN Coated Heavy-Duty Heavy-duty 135 split point with gold finish made to aircraft specifications. Use to drill hard, tough metals, free machining stainless steel, titanium alloys and certain abrasive plastics /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $26.20 Type 260-AND M42 Cobalt - HSS 135 Split Point - Titanium Aluminum Nitride Can be used in machining stainless steels, nickel based and titanium alloys, not recommended for aluminum /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $31.44 Jobber & screw tin coated drills #60 thru 9/32 thru L = 6 per pack. 19/64 thru 1/2 & thru Z = 3 per pack. 19

24 20 Screw Machine Length Drills TiN Coated Type 260-BN HSS 118 Point - TiN Coated The short length of drill and flute makes this an especially rigid drill for greater drilling accuracy. Can be used for all screw machine operation. This drill is designed for ease of penetration and to facilitate chip removal in tough, hard materials /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $14.01 Type 260-TN TiN Coated - Super High Performance 135 Split Point - Heavy-Duty This heavy-duty drill performs well in very demanding applications. The TiN coating provides a super hard surface with high lubricity. The tool life may be extended 500% or more in high wear or very abrasive applications /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $3.04 Type 260-BN Sets HSS 118º Point TiN Coated SMN-29 $ SMN-60 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $3.55 Type 260-TN Sets TiN Coated Screw Machine Length 135º Split Point - Heavy-Duty TN-29 $ TN-60 $284.42

25 Taper Length Drills Type 210 General Purpose - High-Speed Steel Point Bright finish thru 1" diameter. Surface treated flutes from 1-1/64" to 1-3/4" diameter. General purpose 118 point, recommended for mild drilling applications where extra long drills are required /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $92.27 Price List (continued) /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /2 $ /16 $ /8 $ /4 $ Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $21.14 Taper Length Drills General Purpose $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $9.12 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 21

26 Taper & Extra Length Drills Automotive, TiN Coated,Parabolic, Ultra Bor 22 Taper Length Drills Type 220 Automotive Series - Tang Drive High-Speed Steel - Black Oxide 118 Point Same construction as Type 210 except these drills are tanged and Black Oxide. When used with A.S.A. split sleeve drill drivers, these drills serve as economical substitutes for taper shank drills /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /64 $ /16 $ /32 $ /64 $ /4 $53.46 Jobber, screw & mechanics drills #97 thru 9/32 A thru L = 12 per pack. 19/64 thru 1/2 & M thru Z = 6 per pack. Over 1/2 = 1 per pack. Tin Coated (221-PT - 87) 1/8 thru 9/32 = 6 per pack, 19/64 thru 1/2 = 3 per pack. Proudly Manufactured in the U.S.A. Order: Type 221-P Heavy-Duty - Parabolic Flute Tang Drive Split Point Black Oxide Parabolic flute drills are designed to eliminate the need for frequent drill removal in deep hole drilling in low to medium tensile strength materials /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $23.84 Type 221-PT Heavy-Duty - Parabolic Flute TiN Coated - Tang Drive 135 Split Point This high performance drill combines the superior wear resistance of TiN coating and the deep hole drilling advantages of parabolic flutes /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $40.37 Extra Length Drills Type XGT-UB Ultra Bor Super Premium - H-Duty 135 Split Point - 6"- 9"-12" Special Hi-Molybdenum tool steel. Gold surface treated for maximum lubricity. Heavy-duty construction, 135 split point, no center punch needed - will not walk. Gyroidal Torsion flute and land construction yields exceptional performance in deep hole drilling applications. Per No. Size Pack Price /8 X 6 3 $ X 6 3 $ /64 X 6 3 $ /32 X 6 3 $ /64 X 6 3 $ /16 X 6 3 $ X 6 3 $ /64 X 6 3 $ /32 X 6 3 $ X 6 3 $ /64 X 6 3 $ /4 X 6 3 $ F X 6 3 $ /32 X 6 3 $ /16 X 6 3 $ /32 X 6 3 $ /8 X 6 1 $ /32 X 6 1 $ /16 X 6 1 $ /2 X 6 1 $ /8 X 9 1 $ /64 X 9 1 $ /32 X 9 1 $ /64 X 9 1 $ /16 X 9 1 $ /64 X 9 1 $ /32 X 9 1 $ /64 X 9 1 $ /4 X 9 1 $ /32 X 9 1 $ /16 X 9 1 $ /32 X 9 1 $ /8 X 9 1 $ /16 X 9 1 $ /2 X 9 1 $ /8 X 12 1 $ /64 X 12 1 $ /32 X 12 1 $ /64 X 12 1 $ /16 X 12 1 $ /64 X 12 1 $ /32 X 12 1 $ /64 X 12 1 $ /4 X 12 1 $ /32 X 12 1 $ /16 X 12 1 $ /32 X 12 1 $ /8 X 12 1 $ /16 X 12 1 $ /2 X 12 1 $67.72

27 Extra Length Drills Type 200 & 208 Longboy Drills - 12"-18" Pt. This general purpose 118 point high-speed steel drill is recommended for a wide range of deep hole production drilling applications. Type " High-Speed Steel /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /32 $ /16 $ /32 $ /8 $ /16 $ /4 $81.30 Type " /16 $ /32 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /2 $ /32 $ /16 $ /32 $ /8 $ Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. Sheeters Drills Type 213 Black Oxide -135 Split Point This heavy-duty 135 split point high-speed steel drill is excellent for drilling sheet metal and corrugated construction panels X 3 $ X4-1/2 $ X 6 $5.62 Extra Length Drills & Sheeters Drills Longboy, Aircraft, Welded Construction Type 211 Aircraft Type B 6" 135 Split Point - Heavy-Duty High-Speed Steel This heavy-duty 135 split point high-speed steel drill is used extensively in Aircraft and transportation applications for drilling holes in hard to reach places /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /32 $ /16 $ /32 $ /64 $ /8 $ /16 $ /2 $ $ $ $ $ $ $ $ $ $ $ $ $4.91 Type 209-D NAS 907J Aircraft 6", 135 Split Point Solid Construction Cobalt - Gold Treated Heavy-duty 135 split point high-speed steel drill is used extensively in Aircraft and transportation applications for drilling holes in hard to reach places. 6" /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ $ $ $ $ $ $ $ $ $7.09 Type 212 Extension Drill - Black Oxide 135 Split Point - High-Speed Steel This heavy-duty 135 split point high-speed steel drill is used for drilling holes in hard to reach places /16 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ $ $ $ $ $ $ $ $ $6.27 Type 213-D NAS 907J 12" Extension Drill, Cobalt - Gold Treated This heavy-duty 135 split point high-speed steel drill is used for drilling holes in hard to reach places. 12" /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ $ $ $ $ $ $ $ $ $

28 Reduced Shank Drills Silver & Deming, Ultra Bor Super Premium Price List Reduced Shank Drills Type 280-UB 1/2" Shank Silver & Deming Ultra Bor Super Premium 3-Flats on Shank Heavy-Duty, 135 Split Point Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without a center punch. Sizes larger than 1" diameter have 118 split point. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /4 $ /16 $ /8 $ /16 $ /2 $ Type 280-UB Sets/Displays 1/2" Shank - Silver & Deming Black & Gold Heavy-Duty Super Premium Silver & Deming - 1/2" Shank Sets S&D-4SP $ S&D-8SP $ S&D33SP $1, Silver & Deming Displays SD8SPA $ Display Only (SD-CAB) $ S&D-13SP $ Type 280-UBM (Metric) 1/2" Shank Silver & Deming Ultra Bor Super Premium 3-Flats on Shank Split Pt. Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without a center punch. Sizes larger than 3/4" diameter have 118 split point. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance. Body and clearance are gold surface treated for maximum lubricity. Metric $ $ $ $ $ $ $ $ $ $ $ $68.59 Type 281-UB 3/4" Shank Silver & Deming Ultra Bor Super Premium 135 Split Point These are high performance, close tolerance, tight runout spec. tools designed for drilling with Bridgeport style or other production machines with 3/4" chucks. Special Hi-Molybdenum tool steel with 135 split points for fast penetration and accurate starting without center punch /16 $ /8 $ /16 $ INCH $ /8 $ /4 $ /8 $ /2 $ Proudly Manufactured in the U.S.A. Order: Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack.

29 Type 280-MRO Maintenance Length 1/2 Reduced Shank 135 Split Point 3-Flats on Shank Surfaced Treated Flutes The 280-MRO is a new shorter (5 ) tougher version of our very popular 1/2" reduced shank products. Designed specifically for the needs of the MRO market, the 280-MRO has a split point (135 ) to insure fast hole starts without drill walking /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $61.66 Set Type-280-MRO Silver & Deming No.Size Price S&D-4MRO $ Type 280-D 1/2" Shank Silver & Deming 135 Split Point Super High-Speed M42 Cobalt Heavy-duty 135 split point with gold finish for use in drilling hard tough metals, free machining stainless steel, high temperature alloys, titanium and certain plastics /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $79.36 Price List Continued Type 280-D /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $ /2 Shank M42 Cobalt Sets S&D-4 $ S&D-8 $ Type 280-UBX 1/2" Shank Silver & Deming Premium - 3-Flats on Shank 118 Split Point M-2 High Speed Steel Precision ground point, flutes, body and clearance. Standard 118 split point for general purpose drilling in metal, wood and plastic. 118 Split Point Type 280-UBX /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $ /16 $ /8 $ /32 $ /16 $ /4 $93.87 Sets Type 280-UBX S&D-4P $ S&D-8P $ Reduced Shank Drills Silver & Deming, Heavy-Duty, M42 Cobalt Type 280 1/2" Shank Silver & Deming 118 Point, General Purpose - HSS This general purpose 118 point high-speed steel drill is recommended for use in portable air and electric drilling equipment with 1/2" chucks. Type 130 drills may be used in power applications such as drill presses where a short rigid drill is required /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $ /16 $ /8 $ /32 $ /16 $ /4 $ /64 $ Type 280 Sets/Displays 1/2" Shank - Silver & Deming Heavy-Duty Super Premium Silver & Deming - 1/2" Shank Sets S&D-4 $ S&D-8 $ S&D-33 $1, Silver & Deming Displays S&D-13 $ Display Only (SD-CAB) $ Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 25

30 Metric Drills Ultra Bor Super Premium, Black & Gold Price List Metric Drills Type 643-UB Jobber Length - Metric 135 Split Point Ultra Bor Super Premium Special Hi-Molybdenum tool steel with 135 split points for fast penetration and accurate starting without a center punch. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance. Body and clearance are gold surface treated for maximum lubricity. Metric $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $2.67 Metric (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $11.90 Metric (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $15.88 Type 643-UB Sets/Displays Metric Jobber Length 135 Split Point Black & Gold Ultra Bor Super Premium 643-UB SP-11M $ SP-13M $ SP-19M $ SP-25M $ SP-41M $ SP-118M $ Metric Drills - 91 Piece Assortment SP $ Proudly Manufactured in the U.S.A. Order: Metric jobber drill thru 7.4mm = 10 per pack, thru 13mm = 5 per pack, over 13mm = 1 per pack.

31 Metric Drills Black Oxide, High-Speed Steel & Bright Finish Metric Drills Type 643 Jobber Length - Metric 118 Point, General Purpose Black Oxide - High-Speed Steel This 118 point, high speed steel drill performs well in a wide variety of ferrous metal drilling applications. The black surface treatment prevents chip welding and increases abrasion resistance. Type 643-W Jobber Length - Metric Pt. General Purpose - Bright Finish High-Speed Steel This 118 point, high-speed steel drill performs well in a wide variety of drilling applications. It is recommended for non-ferrous metals, wood and plastics. Metric $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $11.90 Type 643 Sets Jobber Length - METRIC General Purpose - Black Oxide Metric M-11 $ M-13 $ M-25 $ Metric $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $11.90 Proudly Manufactured in the U.S.A. Metric jobber drill thru 7.4mm = 10 per pack, thru 13mm = 5 per pack, over 13mm = 1 per pack. 27

32 28 Metric Drills Heavy-Duty, Cobalt, High-Speed Steel Metric Drills Type 643-D Jobber Length Split Point M42 Cobalt NAS 907-J Heavy-Duty Heavy-duty 135 split point with gold finish for use in drilling hard tough metals, free machining stainless steel, high temperature alloys, titanium and certain plastics. High red hardness of cobalt steel permits speeds 30% higher than regular high-speed steel drills. Metric Price List Metric (continued) Type 643-D Sets Cobalt Jobber Length - Metric NAS 907-J Cobalt - Metric D-11M $ D-13M $ D-19M $ D-25M $ D-41M $ Type XGT-J Jobber Length - Super M42 Cobalt, High-Speed Steel DIN 338 Heavy-Duty Gold surface treated for maximum lubricity. Heavy-duty construction, 135 split point, no center punch needed - will not walk. Gyroidal Torsion flute and land construction yields exceptional performance in deep hole drilling applications. Recommended for a wide range of steels, castings and other hard metal drilling applications. * M2 TiN Coated sizes mm Metric * * * * * * * * * * * * * * * * * * * * $ $ $ $ $ $ $ $3.94 Continued Type XGT-J on page 29 Metric jobber drill thru 7.4mm = 10 per pack, thru 13mm = 5 per pack, over 13mm = 1 per pack.

33 Metric Drills Type XGT-J Metric (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $8.80 Price List Metric (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $25.00 Metric Drills Super M42 Cobalt, High-Speed Steel Metric (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $29.17 Type XGT-JN Titanium Nitride Jobber Length - M42 Cobalt, High-Speed Steel DIN 338 Heavy-Duty Heavy-duty construction, 135 split point, no center punch needed - will not walk. Gyroidal Torsion flute and land construction yields exceptional performance in deep hole drilling applications. Recommended for a wide range of steels, castings and other hard metal drilling applications /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $33.66 Proudly Manufactured in the U.S.A. Order: Metric jobber drill thru 7.4mm = 10 per pack, thru 13mm = 5 per pack, over 13mm = 1 per pack. 29

34 30 Taper Shank Drills High-Speed Steel, Black Oxide Taper Shank Drills Type 510 High-Speed Steel Regular Shank - Black Oxide Flutes & Clearance Taper shank drills are made to fit tapered holders. They are designed to perform well under a variety of normal conditions in a wide range of materials. PACKAGED INDIVIDUALLY /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ INCH $ /64 $ Price List (continued) /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ INCH $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /4 $ /16 $ /8 $ /16 $ /2 $ Order: Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $56.29 Type 500 High-Speed Steel - Black Oxide Shank Smaller than Regular Taper shank drills are made to fit tapered holders. They are designed to perform well under a variety of normal conditions in a wide range of materials. PACKAGED INDIVIDUALLY /64 $ /2 $ /64 $ /32 $ /64 $ /16 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /32 $ /16 $ /32 $ Continued Type 500 on page 31 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack.

35 Taper Shank Drills Type 500 (continued) (continued) /8 $ /32 $ /16 $ /32 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ INCH $ Type 520 High-Speed Steel - Black Oxide Shank Larger than Regular Taper shank drills are made to fit tapered holders. They are designed to perform well under a variety of normal conditions in a wide range of materials. PACKAGED INDIVIDUALLY. Type /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ INCH $ /32 $ /16 $ Drill Blanks Type 240-DB Hardened and Ground - Bright Finish Drill blanks are used as hole size and bushing gauges. They may also be used as guide pins for die sets. Tolerances : thru 1/4'' over 1/4'' /32 $ /64 $ /16 $ /64 $1.71 Taper Shank Drills & Drill Blanks /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $11.04 Letter A $ B $ C $ D $ E $ F $ G $ H $ I $ J $ K $ L $ M $ N $ O $ P $ Q $ R $ S $ T $ U $ V $ W $ X $ Y $ Z $ $ $ $ $ $ $ $ $ $2.57 High-Speed Steel (continued) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1.84 Jobber, screw & mechanics drills #97 thru 9/32 thru L = 12 per pack. 19/64 thru 1/2 & thru Z = 6 per pack. Over 1/2 = 1 per pack. 31

36 HSS Gun Tap-Machine Screw & HSS Spiral Point - METRIC Ultra Bor Super Premium 32 Gun Tap-Machine Screw Type 20-UB Gold Oxide, Type 20-UB TiN Coated and Type 20 Bright Finish Ground Thread- Ultra Bor Super Premium Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. Spiral point construction drives chips ahead of the tap, permitting higher speeds and faster cutting with less torque Type 20 -UB, Type 20-UBN and 20 Size H Limit 20-UB # Price 20-UBN # Price 20 # Price 0-80 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $8.60 1/4-20 H $ $ $8.02 1/4-20 H $ $ $8.02 1/4-20 H $ $ $7.36 1/4-20 H $ $ $8.02 1/4-20 H $ $ $8.98 1/4-20 H $ $ $8.98 1/4-28 H $ $ $8.02 1/4-28 H $ $ $8.02 1/4-28 H $ $ $7.36 1/4-28 H $ $ $8.02 1/4-28 H $ $ $8.98 1/4-28 H $ $ $8.98 5/16-18 H $ $ $ /16-18 H $ $ $9.86 5/16-18 H $ $ $8.96 5/16-18 H $ $ $9.86 5/16-18 H $ $ $ /16-18 H $ $ $ /16-24 H $ $ $ /16-24 H $ $ $9.86 5/16-24 H $ $ $8.96 5/16-24 H $ $ $9.86 Taps are packaged 3 per pack thru 1/2'' and 1 per pack above 1/2''. Bold = Most common size taps Type 20 -UB, Type 20-UBN and 20 Size H Limit 20-UB # Price 20-UBN # Price 20 # Price 5/16-24 H $ $ $ /16-24 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $9.83 3/8-16 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /16-14 H $ $ $ /16-14 H $ $ $ /16-14 H $ $ $ /16-20 H $ $ $ /16-20 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /16-12 H $ $ /16-18 H $ $ /8-11 H $ $ $ /8-11 H $ $ $ /8-18 H $ $ $ /4-10 H $ $ $ /4-10 H $ $ $ /4-16 H $ $ $55.12 Gun Tap-Machine Screw/METRIC Type 21-UB Gold Oxide, Type 21-UB TiN Coated and Type 21 Bright Ground Thread- Ultra Bor Super Premium Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. Spiral point construction drives chips ahead of the tap, permitting higher speeds and faster cutting with less torque METRIC Type 21 -UB, Type 21-UBN and 21 Size PD Limit 21-UB # Price 21-UBN # Price 21 # Price D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $63.28

37 Bold = Most common size taps HSS Straight Flute Hand Taps Types 23-UB, 24-UB, 25-UB Gold Oxide Ground Thread- Ultra Bor Super Premium Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping or hand operations. Type 23--UB, Type 24-UB and Type 25-UB Size H Limit 23-UB # Price 24-UB # Price 25UB # Price 0-80 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ /4-20 H $ $ $ /4-20 H $ $ $ /4-20 H $ $ $ /4-20 H $ $ $ /4-28 H $ $ $ /4-28 H $ $ $ /4-28 H $ $ $ /4-28 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /16-24 H $ $ $ /16-24 H $ $ $ /16-24 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /16-14 H $ $ $ /16-14 H $ $ $ /16-20 H $ $ $ /16-20 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /16-12 H $ $ $ /16-12 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $38.72 HSS Straight Flute Hand Taps Gold Oxide & TiN Coated Type 23--UB, Type 24-UB and Type 25-UB Size H Limit 23-UB # Price 24-UB # Price 25UB # Price 9/16-18 H $ $ $ /8-11 H $ $ $ /8-11 H $ $ $ /8-11 H $ $ $ /8-18 H $ $ $ /8-18 H $ $ $ /8-18 H $ $ $ /16-11 H $ $ $ /16-16 H $ $ $ /4-10 H $ $ $ /4-10 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /8-9 H $ $ $ /8-9 H $ $ $ /8-14 H $ $ $ /8-14 H $ $ $ /8-14 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ /8-7 H $ $ $ /8-12 H $ $ $ /4-7 H $ $ $ /4-12 H $ $ $ /8-6 H $ $ $ /8-12 H $ $ $ /2-6 H $ $ $ /2-12 H $ $ $ HSS Straight Flute Hand Taps Types 23-UBN, 24-UBN, 25-UBN Tin Coated Ground Thread- Ultra Bor Super Premium TiN coating - increases wear resistance by producing a higher surface hardness and exceptional lubricity resulting in longer tool life. Type 23--UBN, Type 24-UBN and Type 25-UBN Size H Limit 23-UBN # Price 24-UBN # Price 25UBN # Price 0-80 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $

38 34 HSS Straight Flute Hand Taps TiN Coated, Bright Finish HSS Straight Flute Hand Taps Types 23-UBN, 24-UBN, 25-UBN Tin Coated Ground Thread- Ultra Bor Super Premium TiN coating - increases wear resistance by producing a higher surface hardness and exceptional lubricity resulting in longer tool life. Type 23--UBN, Type 24-UBN and Type 25-UBN Size H Limit 23-UBN # Price 24-UBN # Price 25-UBN # Price H $ $ $ /4-20 H $ $ $ /4-20 H $ $ $ /4-20 H $ $ $ /4-20 H $ $ $ /4-28 H $ $ $ /4-28 H $ $ $ /4-28 H $ $ $ /4-28 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /16-24 H $ $ $ /16-24 H $ $ $ /16-24 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /16-14 H $ $ $ /16-14 H $ $ $ /16-20 H $ $ $ /16-20 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /16-12 H $ $ $ /16-12 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /8-11 H $ $ $ /8-11 H $ $ $ /8-11 H $ $ $ /8-18 H $ $ $ /8-18 H $ $ $ /8-18 H $ $ $ /16-11 H $ $ $ /16-16 H $ $ $ /4-10 H $ $ $ /4-10 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /8-9 H $ $ $ /8-9 H $ $ $ /8-14 H $ $ $ /8-14 H $ $ $ /8-14 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ /8-7 H $ $ $ /8-12 H $ $ $ /4-7 H $ $ $ /4-12 H $ $ $ /8-6 H $ $ $ /8-12 H $ $ $ /2-6 H $ $ $ /2-12 H $ $ $ Bold = Most common size taps HSS Straight Flute Hand Taps Types 23, 24, 25 Bright Finish Ground Thread- Ultra Bor Super Premium Type 23, Type 24 and Type 25 Size H Limit 23 # Price 24 # Price 25 # Price 0-80 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $7.36 1/4-20 H $ $ $7.71 1/4-20 H $ $ $7.71 1/4-20 H $ $ $7.36 1/4-20 H $ $ $7.71 1/4-28 H $ $ $7.71 1/4-28 H $ $ $7.71 1/4-28 H $ $ $7.36 1/4-28 H $ $ $7.71 5/16-18 H $ $ $9.68 5/16-18 H $ $ $8.96 5/16-18 H $ $ $9.68 5/16-24 H $ $ $ /16-24 H $ $ $8.96 5/16-24 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $ /8-16 H $ $ $9.83 3/8-16 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $ /8-24 H $ $ $9.83 3/8-24 H $ $ $ /16-14 H $ $ $ /16-14 H $ $ $ /16-20 H $ $ $ /16-20 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-13 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /2-20 H $ $ $ /16-12 H $ $ $ /16-12 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /16-18 H $ $ $ /8-11 H $ $ $40.48 Continued on the Next page

39 Bold = Most common size taps HSS Straight Flute Hand Taps Types 23, 24, 25 Bright Finish Ground Thread- Ultra Bor Super Premium Type 23, Type 24 and Type 25 Size H Limit 23 # Price 24 # Price 25 # Price 5/8-11 H $ $ $ /8-11 H $ $ $ /8-18 H $ $ $ /8-18 H $ $ $ /8-18 H $ $ $ /16-11 H $ $ $ /16-16 H $ $ $ /4-10 H $ $ $ /4-10 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /4-16 H $ $ $ /8-9 H $ $ $ /8-9 H $ $ $ /8-14 H $ $ $ /8-14 H $ $ $ /8-14 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ /8-7 H $ $ $ /8-12 H $ $ $ /4-7 H $ $ $ /4-12 H $ $ $ /8-6 H $ $ $ /8-12 H $ $ $ /2-6 H $ $ $ /2-12 H $ $ $ SETS - HSS Straight Flute Hand Taps Machine Screw/ Taper, Plug, Bottoming Ground Thread - High Speed Steel Type 26-UB - Gold Oxide, Type 26-UBN - Titanium Nitride (TiN), Type 26 - Bright Finish Sets Type 26-UB, Type 26-UBN and Type UB 26-UBN 26 H Gold Oxide TiN Coated Bright Size Limit # Price # Price # Price 2-56 H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ H $ $ $ /4-20 H $ $ $ /4-28 H $ $ $ /16-18 H $ $ $ /16-24 H $ $ $ /8-16 H $ $ $ /8-24 H $ $ $ /16-14 H $ $ $ /16-20 H $ $ $ /2-13 H $ $ $ /2-20 H $ $ $58.60 Continued on the Next column HSS Straight Flute Hand Taps Bright Finish SETS - HSS Straight Flute Hand Taps Machine Screw/ Taper, Plug, Bottoming Ground Thread - High Speed Steel Type 26-UB - Gold Oxide, Type 26-UBN - Titanium Nitride (TiN), Type 26 - Bright Finish SETS Type 26-UB, Type 26-UBN and Type UB 26-UBN 26 H Gold Oxide TiN Coated Bright Size Limit # Price # Price # Price 9/16-12 H $ $ $ /16-18 H $ $ $ /8-11 H $ $ $ /8-18 H $ $ $ /4-10 H $ $ $ /4-16 H $ $ $ /8-9 H $ $ $ /8-14 H $ $ $ "-8 H $ $ $ "-12 H $ $ $ "-14 H $ $ $ /8-7 H $ $ $ /8-12 H $ $ $ /4-7 H $ $ $ /4-12 H $ $ $ /8-6 H $ $1, $ /8-12 H $ $1, $ /2-6 H $1, $1, $ /2-12 H $1, $1, $ METRIC - Straight Flute Hand Taps Gold Oxide Ground Thread - High Speed Steel Type 31-UB, 32-UB, 33-UB Gold Surface Treated Ultra Bor Super Premium Gold Oxide - low temperature stress relief that enhances lubricity, reduces friction and increases tap toughness. Type 31-UB, Type 32-UB and Type 33-UB PD 31-UB 32-UB 33-UB Size Limit # Price # Price # Price D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $90.67 Continued on the Next page 35

40 HSS Straight Flute Hand Taps Ultra Bor Super Premium 36 METRIC - Straight Flute Hand Taps Gold Oxide Ground Thread - High Speed Steel Type 31-UB, 32-UB, 33-UB Gold Surface Treated Ultra Bor Super Premium Gold Oxide - low temperature stress relief that enhances lubricity, reduces friction and increases tap toughness. Type 31-UB, Type 32-UB and Type 33-UB PD 31-UB 32-UB 33-UB Size Limit # Price # Price # Price D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ METRIC - Straight Flute Hand Taps Gold Oxide Ground Thread - High Speed Steel Type 31-UBN, 32-UBN, 33-UBN Gold Surface Treated Ultra Bor Super Premium Gold Oxide - low temperature stress relief that enhances lubricity, reduces friction and increases tap toughness. Type 31-UBN, Type 32-UBN and Type 33-UBN PD 31-UBN 32-UBN 33-UBN Size Limit # Price # Price # Price D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ Proudly Manufactured in the U.S.A. Order: HSS Straight Flute Hand Taps Types 31, 32, 33 Bright Finish Ground Thread- Ultra Bor Super Premium Type 31, Type 32 and Type 33 PD Size Limit # Price # Price # Price D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ Sets METRIC - Straight Flute Hand Taps Ground Thread - High Speed Steel Type 35-UB - Gold Oxide, Type 35-UBN - TiN Coated, Type 35 - Bright Finish SETS Type 35-UB, Type 35-UBN and Type 35 PD 35-UB 35-UBN 35 Gold Oxide TiN Bright Finish Size Limit # Price # Price # Price D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $ D $ $ $199.82

41 Straight Flute Taps & Tap & Drill SETS Ultra Bor Super Premium Straight Flute Taps - Left-Hand Thread Types 23L-UB (Taper) Type 24L-UB (Plug) Type 25L-UB (Bottoming) Gold Surface Treated Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping or hand operations. Type 23L-UB Taper Style $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $ /16-12 $ /16-18 $ /8-11 $ /8-18 $ /1611 $ /1616 $ /4-10 $ /4-16 $ /8-9 $ /8-14 $ $ $ $ /8-7 $ /812 $ /4-7 $ /412 $ /8-6 $ /812 $ /2-6 $ /212 $ Type 24L-UB Plug Style $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $36.37 Type 24L-UB Plug Style (continued) /2-20 $ /16-12 $ /16-18 $ /8-11 $ /8-18 $ /1611 $ /1616 $ /4-10 $ /4-16 $ /8-9 $ /8-14 $ $ $ $ /8-7 $ /812 $ /4-7 $ /412 $ /8-6 $ /812 $ /2-6 $ /212 $ Type 25L-UB Bottoming Style $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $ /16-12 $ /16-18 $ /8-11 $ /8-18 $ /1611 $ /1616 $ /4-10 $ /4-16 $ /8-9 $ /8-14 $ $ $ $ /8-7 $ /812 $ /4-7 $ /412 $ /8-6 $ /812 $ /2-6 $ /212 $ Proudly Manufactured in the U.S.A. Order: Tap & Drill Sets Ultra Bor Super Premium SP-18TD SP-18TDF Spiral Point, NF No. Description Price UB Drills $ UB, 24-UB Taps SP-12TD Spiral Point, NC No. Description Price UB Drills $ UB Taps SP-18TDM Spiral Point, METRIC No. Description Price UB Drills $ UB Taps(mm) Spiral Point, NC No. Description Price UB Drills $ UB Taps SF-18TDC Straight Flute, NC No. Description Price UB Drills $ UB Taps SF-18TDF Straight Flute, NF No. Description Price UB Drills $ UB Taps SF-10TD Straight Flute, NC No. Description Price UB Drills $ UB Drills 24-UB Taps B-18-TD 118ºPoint Drills Maint. No. Description Price B Drills $ Drills 20 Taps Taps are packaged 3 per pack thru 1/2'' and 1 per pack above 1/2''. 37

42 High Performance Reduced Neck Spiral Point Taps Spiral Point Taps Machine Screw/ & METRIC High Performance Reduced Neck Spiral Point Taps Type 29-UB - High-Speed Spiral Point Designed for difficult materials including: stainless steel, alloy steels and high carbon steel, special tool geometry creates less torque, better removal of chips and runs cooler. Necked design enhances flow of cutting fluid to cutting teeth and reduces surface contact between the tool and workpiece for more efficient threading. Gold Oxide # Size Price $ $ $ $ $ $ $ $ $ A $ $ A $ $ A $ $ A $ $12.45 Type 29-UB # Size Price A $ $ A $ /4-20 $ /4-20A $ /4-28 $ /4-28A $ /16-18 $ /16-18A $ /16-24 $ /16-24A $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /16-12 $ /16-18 $45.64 TiN Coated - High Performance Reduced Neck Spiral Point Taps Type 29-UBN - High-Speed Spiral Point TiN Coated # Size Price $ $ $ $ $ $ $ $ $ A $ $ A $ $ A $ $ A $ $18.04 Type 29-UBN # Size Price A $ $ A $ /4-20 $ /4-20A $ /4-28 $ /4-28A $ /16-18 $ /16-18A $ /16-24 $ /16-24A $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $34.40 TiCN Coated - High Performance Reduced Neck Spiral Point Taps Type 29-ACN -High-Speed Spiral Point # Size Price /2-13 $ /2-20 $ /8-11 $ /8-18 $ /4-10 $ /4-16 $ /8-9 $ /8-14 $ $ $ # Size Price $ $ $ $ $20.22 METRIC # Size Price $ $ $ $68.12 # Size Price /16-12 $ /16-18 $ /8-11 $ /8-18 $ /4-10 $ /4-16 $ /8-9 $ /8-14 $ $ $ # Size Price $ $ $ $ $26.84 METRIC # Size Price $ $ $ $79.88 TiCN Coated Type 29-ACN High Performance Spiral Point Taps # Size Price # Size Price # Size Price $ A $ /16-12 $ $ $ /16-18 $ $ A $ /8-11 $ $ /4-20 $ /8-18 $ $ /4-20A $ /4-10 $ $ /4-28 $ /4-16 $ $ /4-28A $ /8-9 $ $ /16-18 $ /8-14 $ $ /16-18A $ $ A $ /16-24 $ $ $ /16-24A $27.38 METRIC A $ /8-16 $29.91 # Size Price # Size Price $ /8-24 $ $ $ A $ /16-14 $ $ $ $ /16-20 $ $ $ A $ /2-13 $ $ $ $ /2-20 $ $ Continued on the Next page

43 High Performance Spiral Point Reduced Neck - Combo Drill&Tap / Tap SETS Ultra Bor Super Premium TiAIN Coated - High Performance Reduced Neck Spiral Point Taps Type 29-ALN - High-Speed Spiral Point # Size Price $ $ $ $ $ $ $ $ $ A $ $ A $ $ A $ $ A $ $20.18 SP-19T - Type 20-UB Spiral Point No. Description Price SP-19T $ , 1-64, 1-72, 2-56, , 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, & SP-10T - Type 20 -UB Spiral Point No. Description Price SP-10T $ /4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/ /2-13 & 1/2-20 # Size Price A $ $ A $ /4-20 $ /4-20A $ /4-28 $ /4-28A $ /16-18 $ /16-18A $ /16-24 $ /16-24A $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $37.67 M42 Cobalt Taps & TiN Coated Type 24-RNC Gold Oxide, Type 24-RNCN TiN Coated - Taps for Hardened Steel and Iron For use in cast iron, brass, bronze, armor plate with a Rockwell C hardness between C30 C45 and hard plastics. Type 24-RNC - Gold Oxide # Thread Size Price $ $ $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $ /8-11 $ /8-18 $ /4-10 $ /4-16 $97.20 Tap Sets Spiral Point & Straight Flute - Magnum Super Premium Straight flute or spiral point taps in rugged black steel index. Combination Drill & Tap Type 24-RNCN - TiN Coated # Thread Size Price $ $ $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $ /8-11 $ /8-18 $ /4-10 $ /4-16 $ SF-10T - Type 24-UB Straight Flute No. Description Price SF-10T $ /4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20 TDC-12 - Type 190-AG, 20-AG and 82-AG No. Description Price TDC-12 $94.55 : #7, 21, 25, 29 and 36. Taps: 6-32, 8/32, 10-24, and 1/4-20 CS: No. 8 screw size and 3/16-17/32 range cut Type 40-QR Combo Drill & Tap $ $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /8-16 $23.76 Proudly Manufactured in the U.S.A. Order: # Size Price /16-12 $ /16-18 $ /8-11 $ /8-18 $ /4-10 $ /4-16 $ /8-9 $ /8-14 $ $ $ # Size Price $ $ $ $ $29.53 METRIC # Size Price $ $ $ $85.87 Combination Drill & Tap $ $ $ $ $ $ $ $ $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $ /16-12 $ /16-18 $ /8-11 $ /8-18 $ METRIC x 0.5 $ x 0.7 $ x 0.8 $ x 1.00 $ x 1.00 $ x 1.25 $ x 1.50 $ x 1.75 $67.13 Sets Type 40 -UB Combo Drill & Tap DT thru 1/4-20 $ DT-7C 8-32 thru 1/2-13 Course $ DT-7F 8-36 thru 1/2-20 Fine $ METRIC # MM size Price x 0.5 $ x 0.7 $ x 0.8 $ x 1.00 $ x 1.25 $ x 1.50 $23.76 Set Type 40 -QR Combo Drill & Tap QR DT-5 $

44 Regular & Interrupted Taper Pipe Taps, Carded Drill & Tap Combo Ultra Bor Super Premium Carded Drill & Tap Combo Type 34-UB Drill & Tap Combo Hi-Molybdenum super premium twist drill combined with the corresponding Hi-Tungsten magnum spiral point tap. Both tools are gold surface treated for maximum lubricity. Precision ground tools for the ultimate in accuracy and performance. Regular - Taper Pipe Taps - Type 30-UB, 30-UBN, 30-B & 30 Ultra Bor Super Premium Regular Thread NPT Taper Pipe taps are used for tapping pipe fittings and couplings in a wide variety of materials / #36 $ / #33 $ / #29 $ / #29 $ / #25 $ / #21 $ / #16 $ / #14 $ /4-20 / #7 $ /4-28 / #3 $ /16-18 / F $ /16-24 / I $ /8-16 / 5/16'' $ /8-24 / Q $ /16-14 / U $ /16-20 / 25/64'' $ /2-13 / 27/64'' $ /2-20 / 29/64'' $37.22 Type 34-UB Display DC38DT Display $ Display Only $39.42 DC38DT Display Type 30-UB Gold Oxide Type 30-UBN TiN Coated 30-UB 30-UBN 30-B 30 Size # of Shank Tap Drill Gold Oxide TiN Coated Black Oxide Bright Finish NPT Flutes OAL Diameter Size # Price # Price # Price # Price 1/ / D $ $ $ $ /8-27 (5/16 Shk) 4 2-1/ / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ "-11 1/ / / $ $ $ $ /4"-11 1/ / $ $ $ $ /2"-11 1/ / / $ $ $ $ "-11 1/ / / $ $ $ $ UB taps 1/8 & 1/4 are 3 per pack. Interrupted - Taper Pipe Taps - Type I30-UB, I30-UBN, I30-B & Interrupted Thread Taper Pipe taps reduce friction, increase chip capacity, and enhance coolant flow. Recommedned for a wide variety of materials including soft ductile materials that produce long stringy chips. ( *Black Oxide Taper Pipe Tap used on Cast Iron ) I30 Ultra Bor Super Premium Type I-30-UBN Interrupted Type I-30-B Interrupted I30-UB I30-UBN I30-B I30 Size # of Shank Tap Drill Gold Oxide TiN Coated Black Oxide Bright Finish NPT Flutes OAL Diameter Size # Price # Price # # Price 1/ / D /8-27 (5/16 Shk) 4 2-1/ / / / / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ / / / $ $ $ $ "-11 1/ / / $ $ $ $ /4"-11 1/ / $ $ $ $ /2"-11 1/ / / $ $ $ $ "-11 1/ / / $ $ $ $ Proudly Manufactured in the U.S.A. Order:

45 Hexagon Dies, Spiral, Hi-Carbon Steel Taps Ulta Bor Super Premium, High-Speed Steel Hexagon High-Speed Steel Dies Type 27-UB Ultra Bor Super Premium Polished gold finish with black surface treated threads for long life. Type 27-UB Hexagon High-Speed Steel Dies $ $ $ $ $ $ /4-20 $ /4-28 $ /16-18 $ /16-24 $ /8-16 $ /8-24 $ /16-14 $ /16-20 $ /2-13 $ /2-20 $ /16-12 $ /16-18 $ /8-11 $ /8-18 $ /4-10 $ /4-16 $ /8-27 NPT $ /4-18 NPT $28.86 Type 27-UB Metric Hexgon High-Speed Dies X.50 $ X.60 $ X.70 $ X.80 $ X 1.00 $ X 1.25 $ X 1.50 $ X 1.75 $ X 1.50 $37.86 Hi-Carbon Steel Taps Type 721 (Plug) Made of super tough carbon steel, these taps are ideal for hand tapping applications. All taps have the size drill to use permanently marked on the tap. These items are manufactured to U.S. industry specifications. Type Plug - Machine Screw X 80 $ X 64 $ X 72 $ X 56 $ X 64 $ X 48 $ X 56 $ X 36 $ X 40 $ X 40 $ X 32 $ X 40 $ X 48 $ X 32 $ X 36 $ X 40 $ X 24 $ X 32 $ X 24 $ X 28 $ X 20 $2.98 Hi-Carbon Steel Taps Types 720 (Plug) Type Plug /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /16 X 12 $ /16 X 18 $ /8 X 11 $ /8 X 18 $ /16 X 11 $ /16 X 16 $ /4 X 10 $ /4 X 16 $ /8 X 9 $ /8 X 14 $ X 8 $ X 12 $ X 14 $19.43 Hi-Carbon Steel Taps Type 741 & 740 (Taper) Type Taper - Machine Screw X 80 $ X 64 $ X 72 $ X 56 $ X 64 $ X 48 $ X 56 $ X 36 $ X 40 $ X 40 $ X 32 $ X 40 $ X 48 $ X 32 $ X 36 $ X 40 $ X 24 $ X 32 $ X 24 $ X 28 $ X 20 $2.98 Type Taper /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /16 X 12 $ /16 X 18 $ /8 X 11 $ /8 X 18 $ /16 X 11 $ /16 X 16 $ /4 X 10 $ /4 X 16 $ /8 X 9 $ /8 X 14 $ X 8 $ X 12 $ X 14 $19.43 Taps are packaged 3 per pack thru 1/2'' and 1 per pack above 1/2''. Dies are packaged 3 per pack thru 1/2'' and 10mm, 1 per pack above 1/2'' and 10mm. 41

46 42 Hi-Carbon Steel Taps Hi-Carbon Steel (Plug, Taper, Bottoming) Hi-Carbon Steel Taps Type 761 & 760 (Bottoming) Type Bottoming - Machine Screw X 80 $ X 64 $ X 72 $ X 56 $ X 64 $ X 48 $ X 56 $ X 36 $ X 40 $ X 40 $ X 32 $ X 40 $ X 48 $ X 32 $ X 36 $ X 40 $ X 24 $ X 32 $ X 24 $ X 28 $ X 20 $2.98 Type Bottoming /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /16 X 12 $ /16 X 18 $ /8 X 11 $ /8 X 18 $ /16 X 11 $ /16 X 16 $ /4 X 10 $ /4 X 16 $ /8 X 9 $ /8 X 14 $ X 8 $ X 12 $ X 14 $19.43 Taps are packaged 3 per pack thru 1/2'' and 1 per pack above 1/2''. Proudly Manufactured in the U.S.A. Order : Price List Hi-Carbon Steel Taps Types 723 & 722 (Sets) Type piece set (Includes 1 each: Taper, Plug, & Bottoming) X 36 $ X 40 $ X 40 $ X 32 $ X 40 $ X 48 $ X 32 $ X 36 $ X 40 $ X 24 $ X 32 $ X 24 $ X 28 $ X 20 $8.93 Type piece set (Includes 1 each: Taper, Plug, & Bottoming) /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /16 X 12 $ /16 X 18 $ /8 X 11 $ /8 X 18 $ /16 X 11 $ /16 X 16 $ /4 X 10 $ /4 X 16 $ /8 X 9 $ /8 X 14 $ X 8 $ X 12 $ X 14 $58.20 Hi-Carbon Steel Dies Types 405 Hex Dies Machine Screw and Sizes These dies are made of high quality carbon tool steel and meet the highest industry specifications X 40 $ X 36 $ X 40 $ X 32 $ X 32 $ X 24 $ X 32 $ X 24 $4.08 Continued on the Next column Hi-Carbon Steel Dies Types 405 Hex Dies Machine Screw and Sizes X 20 $ /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /16 X 12 $ /16 X 18 $ /8 X 11 $ /8 X 18 $ /16 X 11 $ /16 X 16 $ /4 X 10 $ /4 X 16 $ /8 X 9 $ /8 X 14 $ X 8 $ X 12 $ X 14 $ /8 X 27 $ /4 X 18 $ /8-18 $ /2-14 $ /4-14 $ " $22.80 Type 790 Hex Dies Metric Sizes X 0.50 $ X 0.60 $ X 0.70 $ X 0.75 $ X 0.80 $ X 0.90 $ X 1.00 $ X 1.00 $ X 1.00 $ X 1.25 $ X 1.00 $ X 1.25 $ X 1.00 $ X 1.25 $ X 1.50 $ X 1.50 $ X 1.25 $ X 1.50 $ X 1.75 $ X 1.25 $ X 1.50 $ X 2.00 $ X 1.50 $ X 2.00 $ X 1.50 $ X 2.00 $ X 2.50 $10.01 Taps are packaged 3 per pack thru 1/2'' and 1 per pack above 1/2''. Dies are packaged 3 per pack thru 1/2'' and 12mm, 1 per pack above 1/2'' and 12mm.

47 Hi-Carbon Steel Dies & Metric Plug Taps Hi-Carbon Steel Hi-Carbon Steel Dies Types 415 Machine Screw and Sizes Round - Adjustable These dies are made of high quality carbon tool steel and meet the highest industry specifications X 80 $ X 64 $ X 72 $ X 56 $ X 64 $ X 48 $ X 56 $ X 40 $ X 36 $ X 40 $ X 32 $ X 32 $ X 24 $ X 32 $ X 24 $ X 20 $ /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /16 X12 $ /16 X18 $ /8 X 11 $ /8 X 18 $ /16 X 11 $ /16 X 16 $ /4 X 10 $ /4 X 16 $ /8 X 9 $ /8 X 14 $ X 8 $ X 12 $ X 14 $ /8 X 27 $ /4 X 18 $ /8 X 18 $ /2 X 14 $12.61 Type 400 Solid Round Die Machine Screw And Sizes X 36 $ X 40 $ X 40 $ X 32 $ X 32 $ X 24 $ X 32 $ X 24 $ X 20 $ /16 X 24 $ /16 X 32 $ /4 X 20 $ /4 X 28 $ /16 X 18 $ /16 X 24 $ /8 X 16 $ /8 X 24 $ /16 X 14 $ /16 X 20 $ /2 X 13 $ /2 X 20 $ /2 X 24 $ /8 X 27 $ /4 X 18 $3.59 METRIC - Plug Taps Type 780 Hi-Carbon Steel Taps All popular sizes offered for foreign car, motorcycle and machinery threading needs. Made of tough carbon steel to exacting specifications. Metric X.50 $ X.60 $ X.70 $ X.75 $ X.80 $ X.90 $ X 1.00 $ X 1.00 $ X 1.00 $ X 1.25 $ X 1.00 $ X 1.25 $ X 1.00 $ X 1.25 $ X 1.50 $ X 1.50 $ X 1.25 $ X 1.50 $ X 1.75 $ X 1.25 $ X 1.50 $ X 2.00 $ X 1.50 $ X 2.00 $ X 1.50 $ X 2.00 $ X 2.50 $12.30 Proudly Manufactured in the U.S.A. Order : Taps are packaged 3 per pack thru 1/2'' and 1 per pack above 1/2''. Dies are packaged 3 per pack thru 1/2'' and 10mm, 1 per pack above 1/2'' and 12mm. 43

48 Pipe Taps, Wrenches & Gauges &Tap & Die SETS Ultra Bor Super Premium, Hi-Carbon Steel Pipe Taps Type 410 Hi-Carbon Steel /8 $ /4 $ /8 $ /2 $ /4 $ INCH $ /4 $ /2 $ INCH $ Packaged 3 each 1/8 and 1/4, 1 each 3/8 thru 2''. Tap & Reamer Wrenches, Die Stock & Screw Pitch Gauges Types 725, 726 & 727 Tap & Reamer Wrench Professional Quality Type MS-1/2 $ /4-3/4 $ LG-WRN $86.72 Tap & Reamer Wrench - Economy Type up to 1/2 $14.01 Ratching T-Handle Tap Wrenches Type 727R /4 $ /4-1/2 $17.51 Tap & Die Assortments and Displays Super Premium Large Tap & Die Set 58 Piece, Straight Flute Taps & Hex Dies SF58TDI $1, Super Premium Tap & Die Set 40 Piece, Straight Flute Taps & Hex Dies SF40TDI $ Super Premium Tap & Die Set 40 Piece, Spiral Point Taps & Hex Dies T-Handle Tap Wrenches Type /4 $ /16-1/2 $ /16-1/2-3/8 SQ-DR $15.87 Types 728, 729,730 Die Stock - Economy Solid SP40TDI $ Type INCH $8.60 Super Premium Tap & Die Set 25 Piece, Spiral Point Taps & Hex Dies Die Stock - Professional Quality 44 Proudly Manufactured in the U.S.A. Order : Type IN - R/H $ MED - R/H $ /8 - H $51.69 Screw Pitch Gauges Type US $ METRIC $ SP25TDI $ Continued on page 45

49 Tap & Dies Sets, and Spira-Broach Ultra Bor Carbon Steel, Professional Quality Tap & Die Assortments and Displays (continued) Super Premium Tap & Die Set - Metric 23 Piece, Spiral Point Taps & Hex Dies SP23TDI $ Super Premium Tap & Die Set - 15 Piece, Spiral Point Taps & Hex Dies SP15TDI $ Super Premium Tap & Die Set - Metric 14 Piece, Spiral Point Taps & Hex Dies SP14TDI $ Hi-Carbon Steel Tap & Die Sets Type 724 Professional Quality # Piece Set- Stock #HNC14PC NC - With Hex Dies HNC14PC $ Piece Set- Stock #HNF14PC NF - With Hex Dies HNF14PC $ Piece Set- Stock #RNC14PC NC - With Round Dies RNC14PC $ Piece Set- Stock #RNF14PC NF - With Round Dies RNF14PC $ Piece Set- Stock #HMM16PC Metric - With Hex Dies HMM16PC $ Piece Set- Stock #HEX16PC NC - With Hex Dies HEX16PC $ Piece Set- Stock #RND16PC NC - With Round Dies RND16PC $ Piece Set- Stock #HEX24PC Combination NC, NF - With Hex Dies HEX24PC $ Piece Set- Stock #RND24PC Combination NC, NF - With Round Dies RND24PC $ Piece Set- Stock #RND37PC Machine Screw & NC, NF - With Rnd Dies RND37PC $ Piece Set- Stock #HMM37PC Master & Metric - With Hex Dies HMM37PC $ Piece Set- Stock #HEX37PC Machine Screw & NC-NF - With Hex Dies HEX37PC $ Piece Master Mechanic Set Stock #RND40PC Machine Screw & NC-NF - With Rnd Dies RND40PC $ Piece Master Mechanic Set Stock #HEX40PC Machine Screw & NC-NF - With Hex Dies HEX40PC $ Spira-Broach Magnetic Drill Presses MBD 6500 & 7000 The Spira-Broach MBD 6500 and MBD 7000 are the ideal low cost portable drills for plant maintenance and steel erection. The MBD 6500 drill has a variable speed control, Morse Taper which allows for quick conversion to twist drilling, two gear ranges, and a convenient carrying case. The MBD 7000 includes all this and a reversible motor for tapping. MBD 6500/7000 No. Description/ Size Price MBD 6500 $2, MBD 7000 $2, w/ reversible motor Magnetic Drill Presses MBD 5500 The Spira-Broach MDB 5500 is an extremely light, yet powerful magnetic drill featuring the Kwik-Lok Arbor. These attributes give the operator the tremendous ability to cut large diameter holes up to 1-3/8" with a minimum amount of effort and time. Features: Integral Arbor Support For Added Rigidity New super-safe panel which includes: Visual indication of status, solid state electronics. Time delay 1-3/8 inch broaching capacity Lubrication reservoir Ultimate in versatility just 22 lbs. Complete with moulded carrying case MBD 5500 No. Description/ Size Price MBD5500 $1, Drill Chuck $76.80 (5500-DC) Low Profile Magnetic Drill Press MBD4500 Low height for confined spaces Accepts standard 3/4" shank annular cutters Quick release chuck 1-3/8" cutter capacity Horsepower 1.5 RPM load 390 Weight 25 pounds Proudly Manufactured in the U.S.A. Order : Removable handle can be used on either side No. Description/ Size Price MBD 4500 $1,

50 Spira-Broach Ultra High Performance, Gold Finish Price List Spira-Broach Annular Cutters - M42 Cobalt Types 15 & 15L Ultra High Performance Gold Finish Super Cobalt Steel These unique cutters reduce time and power requirements by cutting larger diameter holes as a ring to produce a solid slug. The power requirements are a fraction of those needed when using a twist drill or indexable tooling. 1" Cut Depth Type /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ Pilot Pins for 1" Cut Depth PP1/4 X 1 $ PP 7/16 $10.68 Pilot Pins 2" Cut Depth PP1/4 X 2 $ PP 7/16 $ " Cut Depth Type 15L /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ Types 15 & 15L Sets Type 15 SB-5 1" Length $ Type 15L SB-5 2" Length L $ Annular Cutters Displays SB $2, Display Only (SB-CAB) $ Spira-Broach Annular Cutters - M35 Cobalt Types 14 & 14L Spira-Broach Special Cobalt Cutters - Gold Finish This M35 Cobalt cutter will cut more accurate holes with longer tool life. Annular cutter only cuts material at the periphery of the hole, rather than converting the entire hole to shavings. As a result the energy required to drill the hole is less than that for a traditional twist drill. 1" Cut Depth Type /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ " Cut Depth Type 14L /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ Continued Type 14L on page Annular Cutters are individually packaged.

51 Price List Spira-Broach High-Speed Steel Cutters Spira-Broach Annular Cutters - M35 Cobalt Type14L (continued) 2" Cut Depth Type 14L /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ Pilot Pins for Type 13 & 14 1 Depth PP1/4X1 $ /64 $10.68 Pilot Pins for Type 13 & 14 2 Depth PP1/4X2 $ /64 $10.68 Type 14 & 14L Sets Type 14 SB-5 1" Length $ Type 14L SB-5 2" Length L $ Annular Cutters Displays SB-20HS 14 $1, Display Only (SB-CAB) $ Spira-Broach Annular Cutters - M2 High-Speed Steel Types 13SP & 13LSP Spira-Broach High-Speed Steel Cutters High-Speed (M.2) Steel Annular Cutters offer versatility and economy in Mag based drilling. Application gold treated for maximum lubricity. 1" Cut Depth Type 13SP /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ " Cut Depth (continued) Type 13LSP /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ Pilot Pins for Type 13 & 14 1 Depth PP1/4X1 $ /64 $10.68 Pilot Pins for Type 13 & 14 2 Depth PP1/4X2 $ /64 $10.68 Types 13SP & 13LSP Sets Type 13SP SB-5 1" Length SP $ Type 13LSP SB-5 2" Length LSP $ Order : Annular Cutters Displays SB-20SP 13SP $1, Display Only (SB-CAB) $

52 Left-Hand Spiral Drills & Sets,and Extractors Ultra Bor, Hi-Carbon Steel, Gold Finish Left-Hand Spiral Drills Type 240-AL Left Hand Spiral Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without center punch. Ideal for drilling broken studs. Need for screw and bolt extractor may be eliminated. Left hand spiral drill may loosen the bolt stud while drilling a hole for use of the screw and bolt extractor. Left Hand Spiral /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /4 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /64 $ /32 $ /64 $ /2 $43.78 Extractors Types 420 & 421-UB Screw & Pipe Extractors Hi-Carbon Steel - Spiral Style Remove broken screws, bolts, threaded parts and pipe. To remove the broken threaded part, drill a hole in the broken part, insert extractor and turn to the left. Broken piece is extracted with out damage to threads. Type 420-UB Screw & Pipe Extractors No. SizePrice EX-1 $ EX-2 $ EX-3 $ EX-4 $ EX-5 $ EX-6 $ EX-7 $ EX-8 $ EX-9 $ SE-4N (EX 1-4) SETS $ SE-5N (EX 1-5) SETS $16.77 Screw, Stud and Pipe Extractors Studout Super Premium - Square Forged Hi-Carbon Steel The square shape of these extractors gives the tools the ability to remove broken bolts, screws and pipes with minimum deformation of the broken part. They will not chew up or expand the object being removed. Type 421-UB Studout Super Premium E-1 $ E-2 $ E-3 $ E-4 $ E-5 $ E-6 $ E-7 $ E-8 $ E-9 $34.09 Type 420-UB & 421-UB Sets Bolt Remover Sets A unique combination of left-hand spiral drills and bolt/screw extractors. Both BR sets provide these benefits: Fast and easy stud removal Left-hand spiral drills often eliminate the need for bolt and screw extractors. Type 420-UB & 240-AL Spiral Style BR-8 $ BR-10 $85.32 Type 421-UB uses square extractors. Four piece set handles same rande as BR-10. Type 421-UB & 240-AL Square SQE-4 $ BR-8SQ $85.03 Type 240-AL Sets LF-8 $ LF-12 $ LF-13 $ LF-15 $ LF-17 $ LF-29 $ LF-29P Ultra Dex $ Proudly Manufactured in the U.S.A. Broken Bolt Remover Combo Type 420-AL Left hand drill combined with spiral style screw extractor is ideal for removing broken studs. Description No. Size of Sizes Price EX-1 #1-3/32 LH drill $ EX-2 #2-1/8 LH drill $ EX-3 #3-3/16 LH drill $ EX-4 #4-1/4 LH drill $ EX-5 #5-5/16 LH drill $

53 Hole Expansion Tools & Sets Reamers, Hole Hog Hole Expansion Tools Type 50-UB Car Reamers - Standard Flute Special Hi-Tungsten tool steel, gold surface treated body and clearance for maximum lubricity. For use only to enlarge previously formed or drilled holes. All tools are constructed with left-hand spiral and right-hand cut. Standard Flute /8 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /4 $ Standard Flute Set CR-4SP $ /8, 1/2, 5/8, 3/4 Type 51-UB Car Reamers - Fast Spiral Hole Buster - Super Premium 3-Flats on Shank Special Hi-Tungsten tool steel, gold surface treated body and clearance for maximum lubricity. For use only to enlarge previously formed or drilled holes. All tools are constructed with left-hand spiral and right-hand cut. Fast Spiral /16 $ /8 $ /16 $ /2 $ $ /16 $ /8 $ $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /4 $ /16 $ Fast Spiral 4pc. Reamer Set CR-4FS $ /8, 1/2, 5/8, 3/ SM-4FS $ /16, 3/8, 7/16, 1/2 Type 52-UB & 53-UB Hex Drive Reamers Black & Gold Finish High-Speed Steel - Spiral Flute Type 52-UB Bridge Length Diameter No. Inches Price /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ Type 53-UB Car Length Diameter No. Inches Price /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /16 $ Type 54-UB & 55-UB Taper Shank Reamers Black & Gold Finish High-Speed Steel - Bridge Length Type 54-UB Straight Flute Diameter No. Inches Price /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ Continued Next column Type 55-UB Spiral Flute Taper Shank Diameter No. Inches Price /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ Type 284-UB 4-Flute Core Drill - Hole Hog Super Premium - Flats on Shank Special Hi - Molybdenum tool steel, gold surface treated body and clearance for maximum lubricity. Close tolerance construction. This tool is designed for enlarging existing holes exclusively /8 $ /2 $ /16 $ /8 $ /16 $ /4 $81.28 Hole Expansion Sets Type 284-UB Hole Hog Sets 1/2" Shank (3-flats on shank) 4-Flute Core Drill Super Premium Type 284-UB Sets SP-6HHS $ SP-6HHL $ SP-8HH $

54 50 Auger & Power Bits, Brad Point Pilot Drills, Wood Boring Products Auger Bits Types 940,941,942 Heavy-Duty Carbide A carbide-tipped cutting tip combined with a hardened steel cutting edge, allows it to bore holes in all types of wood quickly, leaving little or no residue. A truly clean, smooth hole is provided. Type " Auger Bits /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $99.83 Type " Auger Bits /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ Type " Auger Bits /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ Types 950 & 951 General Purpose High quality auger bits with hex shanks produced from alloy tool steel. Drill points with threads and one counterblade for cleaner holes.for deep drilling wood applications, quickly and easily drill holes in all types of wood products. Type 950 9" Auger Bits /8 $ /2 $ /16 $ /8 $ /16 $ /4 $ /8 $ /16 $ INCH $ /8 $34.49 Type " Auger Bits /8 $ /2 $ /16 $ /8 $ /16 $ /4 $ /8 $ /16 $ INCH $ /8 $59.04 Types 952 & 953 General Purpose Type " Auger Bits /8 $ /2 $ /16 $ /8 $ /16 $ /4 $ /8 $ /16 $ INCH $ /8 $59.04 Type " Auger Bits /8 $ /2 $ /16 $ /8 $ /16 $ /4 $ /8 $ /16 $ INCH $ /8 $89.28 Power Bits Type 935 Cuts clean accurate holes in all soft and hard woods plus foam core, plastic, many non-metallic building siding and foam insulation /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /8 $ /4 $ /8 $ /2 $ IN. Extension $ IN. Extension $10.10 Type 935 Sets PB-4 $ PB-6 $ PB-13 $55.01 Type 491 Pilot Drills For Hole Saws High-Speed Steel Split Point /4X4 $ /4X3 $ /4X4L $ /4X3L $3.07 Packaged in 12s. Auger Bits and Power Bits are individually packaged. Super Rotary Saw Bits Type 180-RP Super Rotary Saw Bits for Drywall Cutouts /8 (10/PK) $1.28 Super Rotary Saw Bits Type 180 Super Rotary Saw Bits for Drywall Cutouts (10/PK) $ /4 X 2.5 $3.94 Brad Point Drills Type 16-UB Jobber Length Burrout Brad Point Super Premium These high performance drills made from Hi-Moly tool steel will cut holes in sheet metal, wood or plastics and leave no burr. They will also drill splinter free holes in wood. The special BURROUT point cuts at the circumference of the hole to avoid the break through burr problems common with standard point drills /64 $ /32 $ /64 $ /8 $ /64 $ /32 $ /64 $ /16 $ /32 $ /4 $ /16 $ /8 $ /16 $ /2 $20.62 Sets BF-10 $ BF-14 $ Type QR-UB Extensions One handed operation Simply push your PTA into the extension and it will automatically load and lock the accessory. Patented All Hex connection system will hold any ¼ hex shape including, Power Groove and Notched product Patented All Hex connection system holds the accessory without any wobble or play. Tight fit for a professional feel. Made 100% in the USA. Not intended for Impact Tools ADAPT3 $ ADAPT6 $ ADAPT12 $15.12

55 Bell Hanger, Step Drills & Twin End Drills Burrout, Ultra Bits Multi-Diameter, Ultra Bor, Heavy-Duty Step Drills Type 78-ACN Ultra Bit TiCN Coated Multi-Diameter Step Drills Type 78-UB Ultra Bit Multi-Diameter Step Drills Type 78-QR Hex Shank Step Drills /8-1/2 $ /16-1 $ /4-3/4 $ /16A $ /4-7/8 $ /16B $ /8A $ /4 KO $ /16 $ /4A $ SETS /16-7/8 $ /16-1'' $ /4-3/4 $ pcs. EL-4 $ Bell Hanger Bits Type 601 Carbide tipped, alloy steel shanks. Recommended for all telephone, electrical, cable T.V. installers. Flutes are designed for quick chip clearance. Hole in flute for pulling wire /4 X 12 $ /16 X 12 $ /8 X 12 $ /2 X 12 $ /4 X 18 $ /16 X 18 $ /8 X 18 $ /2 X 18 $ /4 X 24 $ /16 X 24 $ /8 X 24 $ /2 X 24 $ /4 X 36 $ /16 X 36 $ /8 X 36 $ /2 X 36 $ /4 X 48 $ /16 X 48 $ /8 X 48 $ /2 X 48 $ /8-1/2 $ /16A $ /16B $ /4-3/4 $ /16-1 $ /16 $ /4KO $ /8-1-7/32 $ /8A $ /4-7/8 $ /4A $97.71 Hanging Tubes Step Drills /2 $ /8 $26.01 SETS /16-7/8 $ /16-1'' $ /4-3/4 $ pcs. EL-4 $ Step Drills Type 78-UBN Ultra Bit TiN Coated Multi-Diameter /8-1/2 $ /16-1 $ /4-3/4 $ /16A $ /4-7/8 $ /16B $ /32 $ /8A $ /4 KO $ /16 $ /4A $ SETS /16-7/8 $ /16-1'' $ /4-3/4 $ pcs. EL-4 $ Step Drills Type 78-QRN Quick Release - TiN Coated Quick Release 1/4" Hex Shank /8-1/2 $ /16-1 $ /4-3/4 $ /16A $ /4-7/8 $ /16B $ /32 $ /8 & 1-1/8 $ /4 KO $ /4 A $98.73 SETS /8-7/8 $ /8-3/4 $ /8 & 1-1/8 $ Twin End Drills Type 490-G Twin End - Ultra Bor Super Premium 135 Split Point /32 $ /64 $ /8 $ /64 $ /32 $ /16 $ /32 $ /4 $ $ $ $ $2.19 Type 490 Twin End - Heavy-Duty 135 Split Point This twin end drill has wide applications in drilling any thin sheet metal or wood. Automotive body shops will find twin end drills especially productive. Black Oxide Finish. Type EXT Extensions - Includes an Allen Wrench No. OAL/Size Price /4 / 3/8 (Bore/Shank) $ /4 / 1/2 (Bore/Shank) $ /2 / 1/2 (Bore/Shank) $47.51 Order : /8-1/2 $ /16-1 $ /4-3/4 $ /16A $ /4-7/8 $ /16B $ /32 $ /8A $ /4 KO $ /4A $ SETS /8-7/8" $ /8-3/4" $ /4-7/8" $ /32 $ /64 $ /8 $ /64 $ /32 $ /16 $ /32 $ /4 $ $ $ $ $2.30 All Twin End Drills are 12 per package. 51

56 52 Specialty Tools Acrylic, Hard Steel, Hole Cutters & Quick Release Hole Cutters Acrylic Drills Type 183-UB Acrylic Drills with Chipfree Point Special Hi-Molybdenum tool steel, gold surface treated body, flute and point for maximum lubricity. Super CHIPFREE point is precision ground at a 60 angle for gradual penetration to avoid cracking and chipping of the acrylic material /32 $ /8 $ /32 $ /16 $ /64 $ /32 $ /4 $ /32 $ /64 $ /16 $ /32 $ /8 $ /64 $ /32 $ /16 $ /32 $ /2 $17.35 Type 183-UB Acrylic Set AD-7 $86.54 Hard Steel Drills Type 602 Hard Steel Drills Carbide tipped, straight flute. These drills are made for use in drilling hardened steel in the range of 48 to 65 Rockwell C. Holes may be drilled without annealing or appreciably changing the structure of the material /8 $ /32 X 3 $ /64 X 3 $ /16 X 3 $ /32 X 4 $ /4 X 4 $ /4 X 6 $ /32 X 4 $ /16 X 4 $ /16 X 6 $ /8 X 4 $ /8 X 6 $ /16 X 6 $ /2 X 6 $ /16 X 6 $ /8 X 6 $32.02 Hard Steel Drills Type 602-C Solid Carbide Straight Flute Excellent for removing broken screw extrators, taps and drill bits. For use in extremely hard and difficult to machine materials /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /4 $ /32 $ /16 $ /32 $ /8 $ /32 $ /16 $ /32 $ /2 $ /8 $ /4 $ Hole Cutters Type CHC-UB Carbide Tipped Holecutters These Super Premium Carbide Tipped Holecutters are made with ultra-hard tungsten carbide teeth for cutting through tough alloys up to 3/16'' thick /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /4 $ /2 $ /4 $ INCH $ /4 $ /2 $ /4 $ INCH $ PILOT $ SCREW $ SPRING $0.38 Type CHC-QR 1/4" Quick Release Hole Cutters Ultra Bor Super Premium Carbide Tipped Holecutters These Super Premium Carbide Tipped Holecutters are made with ultra-hard tungsten carbide teeth for cutting through tough alloys up to 3/16'' thick /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ PILOT $ SCREW $ SPRING $0.04 Deephole Cutters Type CHD-UB Deephole Carbide Tipped Holecutters The Super Premium Carbide Tipped Holecutters provide quick, accurate holes in pipe, steel plates, iron, aluminum, copper, cast iron, and stainless steel up to 1'' thick. Provides these benefits: Easy slug removal Built-in ejector spring and pilot drill for quick, smooth discharge of metal slug for greater productivity. 3 flatted shank for keyless chucks Produces overlapping and interrupted holes easily. Produces holes 3 times faster than bi-metal hole saws /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /16 $ /8 $ /16 $ /4 $ /16 $ /8 $ /16 $ /2 $ /16 $ /8 $ (Shank 1/2) 2-11/16 $ /4 $ /16 $ /8 $ /16 $ INCH $ /4 $ /2 $ /4 $ $ /4 $ /2 $ /4 $ PILOT $ SCREW $ SPRING $0.38 Carbide Tipped Holecutter Sets Type CHD-UB & CHD-UB CHC-UB for 3/16'' Thin Material /16-1-1/16'' $ /8-1'' $ /8-2'' $ CHC-UB Indivdual Sizes Available 9/16 to 5-inch CHD-UB Indivdual Sizes Available 5/8 to 2-inch CHD-UB for 1'' Thick Material /16-1-1/16'' $ /8-1'' $ /8-2'' $ pc. Carbide Tipped Holecutter Sets Ideal for stainless steel, structural steel studs and electrical boxes. Can be used on cast iron, brass, aluminum and other thin non-ferrous metals. Burr free holes. For material up to 3/16" /8", 1-1/8" & 1-3/8" $180.87

57 Specialty Tools, Weldout Spotweld Chatterproof Countersinks, Carbide ALTiN Coated, Cobalt High-Speed Steel Spotweld Weldout Spotweld Drills & Sets Types 492-D & 493-D Weldout Spotweld Drills Super Cobalt High- Speed Steel Gold Finish - Heavy-Duty Spur Point Type 492-D mm X 1.49 $ mm X1.56 $ mm X 1.75 $ mm X 3.62 TE $ mm X 1.49 $ mm X 1.56 $ mm X 1.69 $ mm X 1.75 $ mm X 3.62 TE $ mm X 1.75 $ mm X 3.62 TE $37.38 Type 493-D mm X 2.25 $ mm X 3.62 TE $ mm X 2.25 $ mm X 3.62 TE $35.33 Types 493-DB Carbide ALTiN Coated Spotweld Drills Type 493-DB mm X 1.75 $ mm X 2.00 $ mm X 2.25 $62.84 Types 493-DN Tin Coated Weldout Spotweld Drills M-42 Cobalt High-Speed Steel Heavy-Duty Spur Point Type 493-DN mm X 2.25 $ mm X 3.62 TE $ mm X 2.25 $ mm X 3.62 TE $44.29 Type 492-D WO-6 Set WO-6 $ Type 493-D WO-4 Set WO-4 $ WO-20 Weld Out Display WO-20 $ Glass & Tile Drills Type 626 Carbide Tip with Spear Point These drills are designed for drilling in glass, tile, mirrors and ceramic materials. The spear point allows clean penetration with reduced cutting pressure and breakout. The carbide tip insures long tool life. Fits drills with 3/8'' or large chucks. Individually packaged in clear hanging tubes /8 $ /32 $ /16 $ /4 $ /16 $ /8 $ /2 $21.73 SET GT-4 $40.14 Countersinks Types 296 & 297 Combined Drills & Countersinks High-Speed Steel Surface Treated Flutes over 1/2" Dia. Plain Type 296 Drill ends are of equal diameter. The included angle is $ $ #1 $ $ $ $ $ $ $ $37.11 SET - 5 pcs. Combined Drill and Counter-Sink , 2, 3, 4, 5 $46.15 Countersinks Type 82-UB & 90-UB Type 82-UB Chatterproof Countersinks Super Premium Special Hi-Molybdenum tool steel, gold surface treated points for maximum lubricity and chatterproof finish. These high performance, flute-less tools are: Free cutting - for ease of use Single cutting edge - for fast stock removal Chatterproof CS1/4 $ CS1/4A $ CS5/16 $ CS5/16A $ CS3/8 $ CS3/8A $ CS7/16 $ CS7/16A $ CS1/2 $ CS1/2A $ CS073 $ CS3/16 $ CS307 $ CS307A $ CS431 $ CS1/2B $ CS5S $ CS6S $ CS8S $ CS10S $16.41 Type 82-UB Sets SP-4CS $ SP-4ACS $ SP-9CS $ Type 90-UB Chatterproof Deburring Tools Super Premium DB1/64 $ DB1/16 $ DB1/8 $ DB5/32 $ DB3/16 $ DB5/16 $ DB5/16C $ DB9/16 $ DB1/2 $ SET SP-6DB $ Proudly Manufactured in the U.S.A. Order :

58 Premium Carbide Burrs SA Cylinder Shape - NO End Cut, SB Cylinder Shape - with End Cut, SC Cylinder Shape - Radius End, SD Ball Shape, SE Oval /Egg Shape SA - Cylinder Shape No End Cut - Double Cut DOUBLE CUT MADE in the U.S.A. SD - Ball Shape DOUBLE CUT 54 ALUMA CUT Cylinder Shape - No End Cut - Double Cut SA-41 $ SA-42 $ SA-43 $ SA-11 $ SA-12 $ SA-52 $ SA-13 $ SA-14 $ SA-51 $ SA-1 $ SA-2 $ SA-3 $ SA-3X $ SA-4 $ SA-5 $ SA-6 $ SA-15 $ SA-16 $ SA-7 $ SA-8 $ SA-9 $ Cylinder Shape - No End Cut - Aluma SA-1NF $ SA-3NF $ SA-5NF $ SA-6NF $ SA-7NF $73.66 Cylinder Shape - Extended Shank Length SA-1L $ SA-1L6 $ SA-3L $ SA-3L6 $ SA-5L6 $36.52 SB - Cylinder Shape With End Cut - Double Cut DOUBLE CUT Cylinder Shape - With End Cut - Double Cut SB-41 $ SB-42 $ SB-43 $ SB-11 $ SB-12 $ SB-13 $ SB-14 $ SB-51 $ SB-1 $ SB-2 $ SB-3 $ SB-3X $ SB-4 $26.96 SB - Cylinder Shape With End Cut - Double Cut Cylinder Shape - Double Cut SB-5 $ SB-6 $ SB-15 $ SB-16 $ SB-7 $ SB-8 $ SB-9 $ Cylinder Shape- 6" Extended Shank Length SB-1L $ SB-3L $27.55 SC - Cylinder Shape Radius End DOUBLE CUT ALUMA CUT Cylinder Shape - Radius End - Double Cut SC-41 $ SC-42 $ SC-11 $ SC-12 $ SC-52 $ SC-13 $ SC-53 $ SC-14 $ SC-51 $ SC-1 $ SC-1L $ SC-2 $ SC-3 $ SC-3L $ SC-3X $ SC-4 $ SC-5 $ SC-6 $ SC-7 $ SC-9 $ SC-15 $ SC-16 $70.23 Cylinder Shape - Radius End - Aluma SC-1NF $ SC-3NF $ SC-5NF $ SC-6NF $ SC-7NF $87.31 Cylinder Shape - Radius End - 6" Extended Shank Length SC-1L6 $ SC-3L6 $ SC-5L6 $39.64 Ball Shape - Double Cut SD-41 $ SD-42 $ SD-11 $ SD-53 $ SD-14 $ SD-51 $ SD-1 $ SD-2 $ SD-3 $ SD-4 $ SD-5 $ SD-6 $ SD-7 $ SD-9 $83.61 Ball Shape - Aluma SD-1NF $ SD-3NF $ SD-5NF $ SD-6NF $ SD-7NF $68.87 Ball Shape - 6" Extended Shank Length SD-1L6 $ SD-3L6 $ SD-5L6 $34.16 SE - Oval / Egg Shape DOUBLE CUT ALUMA CUT Oval / Egg Shape - Double Cut SE-41 $ SE-53 $ SE-11 $ SE-51 $ SE-1 $ SE-3 $ SE-5 $ SE-6 $ SE-7 $59.46 Oval / Egg Shape - Aluma SE-3NF $ SE-5NF $ SE-6NF $ SE-7NF $70.53 Oval / Egg Shape- 6" Extended Shank Length SE-1L6 $ SE-3L6 $ SE-5L6 $40.83 Proudly Manufactured in the U.S.A. Order :

59 Premium Carbide Burrs SF Tree Shape Radius, SG Pointed Tree Shape, SK 60ºCone Shape, SL Taper Shape Radius 14ºIncluded Angle, SM Pointed Cone Shape, SN Inverted Cone Shape SF - Tree Shape Radius SH - Flame Shape SN - Inverted Cone Shape Tree Shape Radius - Double Cut SF-41 $ SF-42 $ SF-11 $ SF-53 $ SF-51 $ SF-1 $ SF-3 $ SF-4 $ SF-13 $ SF-5 $ SF-6 $ SF-7 $ SF-14 $ SF-15 $86.20 Tree Shape Radius - Aluma SF-1NF $ SF-3NF $ SF-5NF $ SF-6NF $ SF-7NF $ SF-14NF $95.05 SG - Pointed Tree Shape Pointed Tree Shape - Double Cut SG-41 $ SG-42 $ SG-43 $ SG-44 $ SG-53 $ SG-51 $ SG-1 $ SG-2 $ SG-3 $ SG-13 $ SG-5 $ SG-6 $ SG-7 $ SG-15 $87.38 Pointed Tree Shape - 6" Extended Shank Length SF-1L6 $ SF-3L6 $ SF-5L6 $36.92 SJ - 60º Cone Shape DOUBLE CUT ALUMA CUT Tree Shape Radius - 6" Extended Shank Length SF-1L6 $ SF-3L6 $ SF-5L6 $37.51 DOUBLE CUT DOUBLE CUT 60ºCone Shape - Double Cut SJ-42 $ SJ-1 $ SJ-3 $ SJ-5 $ SJ-6 $ SJ-7 $ SJ-9 $78.82 Flame Shape - Double Cut SH-41 $ SH-53 $ SH-1 $ SH-2 $ SH-5 $ SH-6 $ SH-7 $83.14 Flame Shape - 6" Extended Shank Length SH-2L6 $ SH-5L6 $48.40 SK - 90º Cone Shape DOUBLE CUT DOUBLE CUT 90ºCone Shape - Double Cut SK-42 $ SK-1 $ SK-3 $ SK-5 $ SK-6 $ SK-7 $ SK-9 $78.82 SL - Taper Shape Radius -14º Included Angle DOUBLE CUT Taper Shape Radius 14º Included Angle SL-41 $ SL-42 $ SL-53 $ SL-1 $ SL-2 $ SL-3 $ SL-4 $ SL-5 $ SL-6 $ SL-7 $73.80 Taper Shape Radius 14ºIncluded Angle - Aluma Cut SL-3NF $ SL-4NF $ SL-5NF $ SL-6NF $ SL-7NF $96.46 Taper Shape Radius 14ºIncluded Angle - Extra Length SL-1L6 $ SL-3L6 $ SL-4L6 $39.41 SM - Pointed Cone Shape DOUBLE CUT Pointed Cone Shape - Double Cut SM-41 $ SM-42 $ SM-43 $ SM-53 $ SM-51 $ SM-1 $ SM-2 $ SM-3 $ SM-4 $ SM-5 $ SM-6 $45.29 DOUBLE CUT Inverted Cone Shape - Double Cut SN-41 $ SN-42 $ SN-53 $ SN-51 $ SN-1 $ SN-2 $ SN-4 $ SN-6 $ SN-7 $67.21 Premium Carbide Double Cut Burr Sets Burrs Set A - 9 pcs......$ #19669 Double Cut: SA-51, SB-51,SC-51, SD-51, SE-51, SF-51, SG-51, SM-51, SN-51 Burrs Set B - 9 pcs......$ #19649 Double Cut: SA-1, SA-3, SA-5, SC-1, SC-3, SC-5, SF-1, SF-3, SF-5 Burrs Set C - 9 pcs......$ #19639 Double Cut: SB-1, SB-3, SB-5, SD-1, SD-3, SD-5, SE-1, SE-3, SE-5 Burrs Set D - 9 pcs......$ #19629 Double Cut: SB-1, SB-3, SB-5, SC-1, SC-3, SC-5SF-1, SF-3, SF-5 Burrs Set E - 8 pcs......$ #19619 Double Cut: SA-5, SC-5, SD-5, SE-5, SG-5, SH-5, SK-5, SM-5 Burrs Set F - 8 pcs......$ #19609 Double Cut: SB-5, SC-5, SD-5, SF-5, SG-5, SH-5, SJ-5, SK-5 Premium Carbide Double & Aluma Cut Burr Displays Burrs Display - 48 pcs. # $1, Double Cut: (1/8 SHANK) SA-51DC, SB-51DC, SC-51DC, SD-51DC, SE- 51DC, SF-51DC, SG-51DC, SM-51DC, SN-51DC Double Cut: (1/4 SHANK) SA-1DC, SA-3DC, SA-5DC, SC-1DC, SC-3DC, SC-5DC, SD-1DC, SD-3DC, SD-5DC, SE-1DC, SE-3DC, SE-5DC SF-1DC, SF-3DC, SF-5DC, SG- 1DC, SG-3DC, SG-5DC, SL-4DC, SL-3DC, SL-1DC, SM-5DC, SM-4DC, SM-3DC Aluma Cut: (1/4 SHANK) SA-1NF, SA-3NF, SA-5NF, SC-1NF, SC-3NF, SC-5NF SD-5NF, SD-3NF, SE-5NF, SE-3NF, SF-5NF, SF-3NF, SF-1FM, SL-4NF, SL-3NF Burrs Display - 24 pcs. # $ Double Cut: (1/4 SHANK) SA-5DC, SA-3DC, SA-1DC, SC-5DC, SC-3DC, SC-1DC, SD-5DC, SD-3DC, SD-1DC, SE-5DC, SE- 3DC, SE-1DC, SF-5DC, SF-3DC, SF-1DC, SG-5DC, SG-3DC, SG-1DC, SL-4DC, SL-3DC, SL-1DC, SM- 5DC, SM-4DC, SM-3DC 55

60 Drill Sets Black & Gold, Ultra Bor, Jobber Length Price List Drill Sets Type 643-UB Metric Jobber Length 135 Split Point Black & Gold Ultra Bor Super Premium SP-11M $ SP-13M $ SP-19M $ SP-25M $ SP-41M $ SP-118M $ Type 240-UB Jobber Length Split Point Black & Gold Ultra Bor Super Premium Type 250-UB Mechanics Length 135 Split Point 3-Flats on Shank 3/16 and Larger Black & Gold Ultra Bor Super Premium SPM-13 $ SPM-15 $ SPM-21 $ SPM-29 $ SPM-29P (Ultra Dex) $ SPM-29PO (Ultra Dex) $ Type 258-UB Mechanic Length - 3/8" Reduced Shank Ultra Bor Super Premium Same as Type 250-UB except with 3/8'' reduced shanks. Type 240-GFR 3-flats on Shank 3/8" reduced Shank Same as Type 240-GF except with 3/8" reduced shanks GF-21RS $ GF-29RS $ GF29RSP (Ultra Dex) $ Type 240-A Jobber Length - Heavy-Duty Black Oxide - 135ºSplit Point SP-13 $ SP-15 $ SP-21 $ SP-26 $ SP-29 $ SP-29P (Ultra Dex) $ SP-29PO (Ultra Dex) Blaze Orange $ SP-60 $ SP-115 $ TRI-1SP $34.91 Type 240-CN Jobber Length Split Point CN-TECH Nitride Heavy-Duty NAS 907B CT-13 $ CT-15 $ CT-15P (Red - Ultra Dex) $ CT-29 $ CT-29P (Red - Ultra Dex) $ Type 278-UB Jobber Length - Black & Gold 3/8" Shank Split Point Heavy-Duty Super Premium RSPM-15 $ SPM-21R $ RSPM-29 $ RSPM-29P (Ultra Dex) $ RSPM-29PO (Ultra Dex) $ Type QR-UB Sets 1/4 Hex Shank - Quick Release Drills 135 Split Pt. Ultra Bor Super Premium Hard case Quick Release Sets /16, 3/32, 1/8, 5/32, $ /16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2 & Quick Release Adaptor /16, 3/32, 1/8, 5/32, $ /16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 & Quick Release Adaptor /16, 3/32, 1/8, 5/32, $ /16, 7/32, 1/4 Sets QR-7A and QR-7B do not include Quick Release Adaptors /8, 3/16, 1/4, 5/16, $ /8, 7/16, 1/2 Type 240-GF Gold-Strike 3-Flats on Shank 3/16" and larger Soft Pouch 34803/34804 Soft Pouch A-10 $ A-11 $ A-13 $ A-15 $ A-21 $ A-26 $ A-29 $ A-29P (Ultra Dex) $ A-60 $ A-115 $ Black Oxide Split Point In Plastic Case PL-7A $ PL-10A $ PL-13A $39.46 Type 240 Black Oxide - General Purpose B-10 $ B-11 $ B-13 $ B-15 $ B-20 $ B-21 $ B-26 $ B-29 $ B-60 $ B-80 $ B-114 $ B-115 $ RSP-15 $ RSP-29 $ RSP-29P (Ultra Dex) $ SP-21R $ GF-13 $ GF-15 $ GF-21 $ GF-29 $ GF-29P (Ultra Dex) $ Proudly Manufactured in the U.S.A. Order :

61 Drill Sets Cobalt, TiN Coated, Titanium Carbon Nitride (TiCN), Aluminum Titanium Nitride (TiAIN), Parabolic TiN Coated Drill Sets Type 240-B Jobber Length Bright Finish General Purpose J-10 $ J-11 $ J-13 $ J-15 $ J-20 $ J-21 $ J-26 $ J-29 $ J-60 $ J-115 $ TRI-1 $32.77 Bright Finish with Clear plastic case PL-7 $ PL-10 $ PL-13 $29.12 Type 278 V-Line 3/8" Shank Bright Finish General Purpose R-15 $ R-29 $ R-29P $ R-115 $ Type 643-D Cobalt Jobber Length - Metric NAS 907-J D-11M $ D-13M $ D-19M $ D-25M $ D-41M $ Type 275 1/4" Shank - General Purpose 118 point Q-15 $ Q-21 $ Q-29 $ /4" Shank - Plastic Pouch DC-4N $ DC-5N $51.01 Type 240-D M42 Cobalt - NAS 907-J Jobber Length - Gold Finish D-13 $ D-15 $ D-21 $ D-26 $ D-29 $ D-29P (Ultra Dex) $ D-60 $ D-115 $ Type 240-DN M42 Cobalt -NAS 907J- TiN Coated Jobber Length -135ºSplit Point DN-13 $ DN-15 $ DN-21 $ DN-29 $ DN-26 $ DN-60 $ DN-115 $1, Type 240-AN TiN Coated Jobber Length -135ºSplit Point AN-13 $ AN-15 $ AN-29 $ AN-29PO $ Blaze Orange Ultra Dex AN-60 $ AN-115 $1, Type 240-ACN Titanium Carbon Nitride (TiCN) Jobber Length -135ºSplit Point TICN-15 $ TICN-21 $ TICN-29 $ Type 240-ALN Aluminum Titanium Nitride (TiAIN) Jobber Length -135ºSplit Point ALN-15 $ ALN-21 $ ALN-29 $ Type 240-BN TiN Coated Jobber Length - General Purpose Super High Performance Point BN-13 $ BN-15 $ BN-20 $ BN-29 $ BN-60 $ BN-115 $ Type 240-PT Jobber Length - Heavy-Duty Parabolic - TiN Coated PT-13 $ PT-15 $ PT-21 $ PT-29 $ Type 240-P Heavy-Duty - Parabolic Flute 135 Split Point - Black Oxide P-13 $ P-15 $ P-21 $ P-29 $ Type 248-A Heavy-Duty Black Oxide 135 Split Point SA-13 $ SA-15 $ SA-21 $ SA-29 $ Proudly Manufactured in the U.S.A. 57

62 Drill Sets Heavy-Duty, Silver & Deming, Acrylic Price List Drill Sets Type 248 V-Line Black Oxide - General Purpose SJ-13 $ SJ-15 $ SJ-21 $ SJ-29 $ Type 241-A CAD-HD V-Line Heavy-Duty Black Oxide CAD-13A $ CAD-15A $ CAD-21A $ CAD-29A $ Type 183-UB Ultra Bor Super Premium Acrylic Drills AD-7 $86.54 Type 260-UB Screw Machine Length - Black & Gold Type 260-T Screw Machine Length Black Oxide - Heavy-Duty 135º Split Point T-10 $ T-11 $ T-13 $ T-21 $ T-29 $ T-60 $ Type 260 Screw Machine High-Speed Steel - General Purpose 118 Pt SM-29 $ SM-60 $ Type 280-UB 135º Split Point 1/2" Shank - Silver & Deming Black & Gold Heavy-Duty Super Premium S&D-4SP $ S&D-8SP $ S&D33SP $1, Type 280-UBX 1/2" Shank - Silver & Deming Premium 3-Flats on Shank 118 Split Point S&D-4P $ S&D-8P $ Type 280-MRO Maintenance Length Silver & Deming, 135 Split Point S&D-4MRO $ Type 280 1/2" Shank - Silver & Deming 118 General Purpose S&D-4 $ S&D-8 $ S&D-33 $1, Type 643 Jobber Length - METRIC General Purpose - Black Oxide M-11 $ M-13 $ M-25 $ SPT-26 $ SPT-29 $ SPT-60 $ Type 260-TN TiN Coated Screw Machine Length - Heavy-Duty 135º Split Point TN-29 $ TN-60 $ Proudly Manufactured in the U.S.A. Order :

63 Displays Type 925 Drills 300 Piece Assortment This assortment is complete with lexon front display pictured on the right side of this page. The case stocks 29 fractional sizes -1/16" thru 1/2 " by 64ths - each size in a separate compartment. Individual compartments are plainly marked with drill sizes. Drills will be attractively displayed yet secure with the glass locking cover. No. 300 Piece Assortments Size Price SP $1, HD $1, BR $1, BL $1, SPM $1, RSPM $1, D $1, GF $1, DISPLAY ONLY (VGA) $ Accessories No. Item Price Lock & Key $17.39 Counter Displays/Sets Silver& Deming Drills Stocking cases/ Display with drills. S&D-13 and S&D-13SP SD 8 SPA $ Display Only (SD-CAB) $ S & D-13 $ S & D-13SP $ Annular Cutters Countertop display with clear lexan front. No. Type Price SB-20 Type 15 $2, SB-20HS Type 14 $1, SB-20SP Type 13 $1, Display Only (SB-CAB) $ Step Drill Type 78-ACN Sets Displays, Counter, Sets, Stocking Cases, Dispensers S&D 8SPA /16-7/8" $ /16-1'' $ /4-3/4" $ EL-4 $ Counter Displays/Sets Car Reamers Counter Display with 8 reamers 3/8 thru 1. Sets contain 4 reamers in hard shell case Type 50-UB Standard Flute Reamer (CR8SPA) $1, Type 50-UB Standard Flute CR-4SP $ Set contains 1 each Type 51-UB Fast Spiral with Collar CR8FSA $1, Type 51-UB Fast Spiral Set CR-4FS $ Set contains 1 each One each in 9/16, 11/16, 13/16, 15/16, 1 1/16. Includes 2 Pilot Pins. 5 Piece Set SB-5 1" Length No. Type Price $ $ $ SB-5 2" Length No. Type Price L $ L $ LSP $ Step Drill Type 78-UBN Sets /16-7/8 $ /16-1'' $ /4-3/4 $ EL-4 $ Step Drill Type 78-QR Sets CR8SPA Displays, Stocking Cases Spira-Broach Set Display Only (SD-CAB) $ Spira-Broach Annular Cutter Sets MADE IN THE USA /8-7/8 $ /8-3/4'' $ /8-1-1/8'' $ Stocking Cases Closed Drawer All-Steel Stocking Units with Drills Stocking cases for, Gauge, Letter, and Metric drills. Drills - 96 Piece Assortment SP $ HD $ SPM $ BR $ BL $ D $ RSPM $ Gauge Drills Piece Assortment HD $ SP $ BR $ BL $ Letter Drills - 72 Piece Assortment HD $ SP $ BR $ BL $ Metric Drills - 91 Piece Assortment SP $ Drill Dispensers Type 914 Empty drill dispensers for fractional, wire, and letter sized drills. Drawer Stocking Units DM-25 - Metric $ DF-29 - $ DN-60 - $ DL-26 - Letter $ DSD-42 - S&D $ DMT-Metric Tap $ Step Drill Type 78-UB Sets /16-7/8 $ /16-1'' $ /4-3/4 $ EL-4 $ Step Drill Type 78-QRN Sets MADE IN THE USA /8-7/8 $ /8-3/4'' $ /8-1-1/8'' $

64 Dispensers, Stands, Gauges, Counter Displays Dispensers, Drill Stands & Gauge, Displays Silver & Deming Cabinets Type 914 Type 914 Drill Gauges Type 914 Master Drill Dispensers Type 914 All steel cabinet with vinyl dividers to help protect and separate bits. Huot Model Holds 2 each Reduced Shank S & D bits from 33/64ths to 63/64ths by 64ths /8 W x 7-3/8 D x 7-3/4 H $ (SD63/64) Huot Model Holds 2 each Reduced Shank S & D bits from 1, 1-1/32, 1-1/16, 1-1/8, 1-5/32, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/ / /8 W x 7-3/8 D x 7-3/4 H $ (SD1-1/2) Huot Model US Size Drills /16-1/2 by 64ths, 1-60 $ A-Z Huot Model Metric Size Drills thru 13.0 by.05mm $ Master Tap Dispensers Type 914 Holds most common NC/NF sizes from 1 4" to 1-1 2". Huot Model mm thru 30mm $ Huot Model /4-20 thru 1-14 $ Holds all sizes of National Pipe Taps (NPT) from 1/16 to 2. Huot Model National Pipe Taps (NPT) $ /16 to 2 Holds Metric,Taps, Drills and Dies. From 2.5 x.45 taps to 12.0 x 1.75 taps. Huot Model METRIC No. Size/Metric Price x.45 to 12.0 x 1.75 $ Taps & Dies w/ correct Drill Type 914 Under- mount Dispensers The latest thing in organizing, sorting, storing and securing your cutting tools. The outer shell can be mounted underneath a work bench, desk, shelf, inside a cabinet, just about anywhere. The drawer has a cam-lock to keep your cutting tools safely stored (DD-29) $ Gauge (DD-60) $ Letter (DD-26) $ Empty (DD-00) $ Drill Stands Type 914 Huot Model 826 Letter Sizes Letter sizes A to Z. (DS-26) $8.26 Huot Model 829 Sizes drills 1/16 to 1/2 by $ ths inclusive. (DS-29) Proudly Manufactured in the U.S.A. Huot Model 9092 # " W x 3" D (WDG) $15.39 Huot Model Small 1/16-1/2x " W x 2" D (FDG) $4.46 Huot Model Large 1/2-1x " W x 5" D (LGDG) $21.99 Stocked Counter Displays Contains carbon steel taps & dies. Compact metal case attractively displays complete assortment of carbon steel taps, dies and wrenches. Locking scratch proof Lexan front reduces pilferage and keeps merchandise clean. Carbon Steel - Round Dies PCR (Round) $1, Carbon Steel - Hexagon Dies PCH (Hex) $1, Tap & Die Countertop Displays Stocked displays contain an assortment of Premium HSS taps and dies. 53 Piece, Straight Flute Taps & Hex Dies 53-SF SF $1, Case Only $ Piece, Spiral Point Taps & Hex Dies 55-SP SP $1, Case Only $

65 Display Packages Type 250-UB Mechanics Length Drills Ultra Bor Super Premium Super premium drills in attractive, strong selling displays. All drills are packed on blue cards with scanable barcode. The complete super premium drill feature/ benefit story is printed on the cards. Display prices are 15% lower than the combined prices of individual drills. 1/16 thru 1/8 sizes are packed 3 per card and 9/64 thru 1/4 are packed 2 per card UB drills with flatted reduced shanks are used where indicated. All displays contain an attractive header card and 1/4" peg board fasteners. Tap & Drill Assortments, Display Packages & Indexes Type 250-UB Displays DC72SP $ DC116SP $ DC145SP $ Rack Only $39.42 Tap & Drill Assortments, Indexes Type CHC-UB Carbide Tipped Super Premium Holecutter Display Easily cuts large diameter holes in pipe and steel plate up to 1'' thick. 18 piece display contains rack, one of each CHC-UB holecutters: 13/16, 7/8, 15/16, 1'', 1-1/16, 1-1/8, 1-3/16, 1-1/4, and 1-3/8. And one of each CHD-UB holecutters: 13/16, 7/8, 15/16, 1'', 1-1/16, 1-1/8, 1-3/16, 1-1/4, and 1-3/ Hanging Display $1, Tap & Drill Assortments Ultra Bor Super Premium Special Hi - Tungsten and Hi - Molybdenum tool steels, gold surface treated for maximum lubricity. Recommended for use in production tapping and drilling of work hardening grades of stainless steel and other hard metal applications. Precision ground tap threads for the ultimate in accuracy and performance. 67 pcs. Spiral Point Taps & Jobber Length Drills No. Size Taps / Drills Price SP 21-AG / 190-AG $ pcs. Spiral Point Taps & Jobber Length Drills No. Size Taps / Drills Price SP 20-AG / 190-AG $ pcs. Straight Flute Taps & Jobber Length Drills No. Size Taps / Drills Price SF 24-UB / 240-UB $ Display Only (DTD-29) $ Indexes Only Type 901 Jobber Indexes No. Description Price I-7 $ I-11 $ I-13 $ I-15 $ I-20 $ I-21 $ I-25 $ I-26 $ I-29 $ I-41 $ I-60 $ I-115 $ H-13 $4.79 Silver & Deming Indexes No. Description Price ISD-8SP $ I-SD $ PL-4SD $ PL-8SD $ A-33 $95.72 Plastic Indexes & Cases No. Description Price I-13PL $ I-25TDI $ I-40TDI $ I-58TDI $56.44 Screw Machine Indexes No. Description Price S-13 $ S-21 $ S-26 $ S-29 $ I-29SPT $ S-60 $15.81 Black Indexes - ID Plate Slot continued Jobber Indexes No. Description Price I-3SP $ I-7SP $ I-13SP $ I-15SP $ I-21SP $ I-21SPR $ I-25SP $ I-26SP $ I-29SP $ I-60SP $ I-115SP $80.55 Tap & Drill Indexes No. Description Price I-10TD $ I-12TD $ I-18TD $ I-18TDM $ I-18TDF $16.92 Drill & Extractor Index No. Description Price I-BRSP $ I-BRSQ $18.96 Hole Hog Index No. Description Price I-8HH $42.29 Tap Indexes No. Description Price I-10T $ I-19T $25.51 Spotweld Index No. Description Price I-4WO $ I-6WO $

66 62 Viking Drill and Tool - Index TYPE PAGE Type CHC-UB, CHD-UB, CHC-QR 52 Type Ext Extensions 6-1/4 & 7-1/2 51 MBD 4500, MBD MBD 6500, MBD Type 11-UB 2, 3, 7, 19 Type 13SP & 13LSP 47 Type 14 & 14L Type 15 & 15L 46 Type 16-UB 51 Type 20 Bright 32 Type 20-UB Gold Oxide 32 Type 20-UBN Titanium Nitride 32 Type 21 Metric 32 Type 21-UB Metric 32 Type 21-UBN Metric -TiN Coated 32 Type 23 Bright Type 23-UB Gold Oxide 33 Type 23-UBN Titanium Nitride Type 23L-UB 37 Type 24 Bright Type 24-UB Gold Oxide 33 Type 24-UBN Titanium Nitride Type 24L-UB 37 Type 25 Bright Type 25-UB Gold Oxide 33 Type 25-UBN Titanium Nitride Type 25L-UB 37 Type 26-UB Sets 35 Type 26-UBN Sets 35 Type 26 Sets 35 Type 27-UB Titanium Nitride 41 Type 29-UB Gold Oxide 38 Type 29-UBN Titanium Nitride 38 Type 29-ACN Titanium Carbon Nitride 38 Type 29-ALN Titanium Aluminum Nitride 38 Type 24-RNC Gold Oxide 39 Type 24-RNCN Titanium Nitride 39 Type 30-UB Gold Oxide 40 Type 30-UBN Titanium Nitride 40 Type 30-B Black Oxide 40 Type 30 Bright Finished 40 Type I30-UB Gold Oxide 40 Type I30-UBN Titanium Nitride 40 Type I30-B Black Oxide 40 Type I30 Bright Finished 40 Type 31-UB Gold Oxide 34 Type 31-UBN Titanium Nitride Type 31 Metric 36 Type 32-UB Gold Oxide Type 32-UBN Titanium Nitride 36 Type 32 Metric 36 Type 33-UB Gold Oxide Type 33-UBN Titanium Nitride 36 Type 33 Metric 36 Type 34-UB Gold Oxide 38 Type 35 Sets 36 Type 35-UB Gold Oxide Set 36 Type 35-UBN Set 36 Type 40-UB Gold Oxide 39 Type 40-QR 39 Type 50-UB Gold Oxide 49 Type 51-UB Gold Oxide 49 Type 52-UB Gold Oxide 49 Type 53-UB Gold Oxide 49 Type 54-UB Gold Oxide 49 Type 55-UB Gold Oxide 49 Type 78-ACN 51 Type B78-UB Gold Oxide 51 Type B78-UBN 51 Type 78-QR 51 Type 78-QRN 51 Type 82-UB, 90-UB Gold Oxide 53 Type 183-UB Gold Oxide 53 Type 200, Type 209-D Cobalt 23 Type Type 211, Type Type 213-D Cobalt 23 Type Type 221-P & 221-PT 22 Type Type Type 240-A 2-3 Type 240-AL Sets 48 Type 240-AN 11 Type 240-AND Type 240-ACN Type 240-ALN 12 Type 240-B 4 Type 240-BN Type 240-D 9-10 Type 240-DN 10 Type 240-DB 31 Type 240-F 7 Type 240-GF, 240-GFR 3 Type 240-P 8 Type 240-PT 8-9 Type 240-UB Gold Oxide 1, 56 Type 240-CN CN-TECH 1, 56 Type 241-A V-Line 15 Type 248 V-Line 6 Type 248-A V-Line 3 Type 250-UB Gold Oxide 14, 56 Type 250-UB, Display Pkg 54 Type 258-UB Gold Oxide 15, 56 Type Type 260-D, 260-DN 19 Type 260-AND Titanium Aluminum Nitride 19 Type 260-BN 20 Type 260-QT 16 Type 260-T Type 260-TN 20 Type 260-TW 17 Type 260-UB Gold Oxide Type 275, Type 278-UB Gold Oxide 2, 56 Type Type 280-D and 280-MRO 25 Type 280-UB Gold Oxide 24 Type 280-UBX Gold Oxide 25 Type 280-UBM Gold Oxide 24 Type 281-UB Gold Oxide 24 Type 284-UB Gold Oxide 49 Type Type 340-A 13 Type Type Type Type Type 420-AL 48 Type 420-UB 48 Type 421-UB 48 Type 490, 490-G 51 Type Type 492-D, 493-D 53 Type 493-DB 53 Type 493-DN 53 Type Type Type Type Type 602 Carbide Tipped 52 Type 602-C Solid Carbide 52 Type Type Type Type 643-D 28 Type 643-UB Gold Oxide 26, 55 Type 643-W 27 Type 720, 721, 740, Type 722, Type 724 Tap & Die Sets 45 Type 725, 726, 728, Type 725, 727R 44 Type 760, Type Type Type Type Type Type 940, 941, Type 950, Type 952, Type QR-UB Extensions 3, Type CHC-UB 52 Type CHC-UB & CHD-UB 52 3pc CHC-UB Set 52 Type TDC Type QR-UB 15, 54 Premium Carbide Burrs WO-4 and WO-6 53 WO-20 Display 53 Type XGT-J Type XGT-JN Titanium Aluminum Nitride 29 Type XGT-UB Gold Oxide 22

67 TYPES SETS PAGE 13SP, 13LSP 47 14, 14L , 15L UB BF BF UB SP-10T 38 SP-12TD 37 SP-18TD 37 SP-18TDF 37 SP-19T UB SP-18TDM UB SF-10T 38 SF-10TD 37 SF-18TDC 37 SF-18TDF UB DT-7C 39 DT-7F 39 DT UB SP-4CS 53 SP-4ACS 53 SP-9CS UB SP6DB UB AD B , 56 B , 56 B , 56 B , 56 B , 56 B , 56 B , 56 B , 56 B , 56 B , 56 B , 56 B , A A-10 3, 54 A-11 3, 54 A-13 3, 54 A-15 3, 54 A-21 3, 54 A-26 3, 54 A-29 3, 54 A-29P 3, 54 A-60 3, 54 A-115 3, AL LF-8 48 LF LF LF LF LF Black Ultra Dex LF-29P AN AN-13 11, 57 AN-15 11, 57 AN-29 11, 57 Orange Ultra Dex AN-29PO 11, 57 AN-60 11, 57 AN , ACN ACN , 57 ACN , 57 ACN , ALN ALN , 57 ALN , 57 ALN , B J-10 4, 57 J-11 4, 57 J-13 4, 57 J-15 4, 57 J-20 4, 57 J-21 4, 57 J-26 4, 57 J-29 4, 57 TYPES SETS PAGE J-60 4, 57 J-115 4, 57 TRI-1 4, 57 PL-7 4, 57 PL-10 4, 57 PL-13 4, 57 PL-14 4, BN BN , 57 BN , 57 BN , 57 BN , 57 BN , D D , 57 D , 57 D , 57 D , 57 D , 57 Black Ultra Dex D-29P 9-10, 57 D , 57 D , GF GF-13 3, 56 GF-15 3, 56 GF-21 3, 56 GF-29 3, 56 Black Ultra Dex GF-29P 3, GFR GF-21RS 3, 56 GF-29RS 3, 56 Black Ultra Dex GF-29RSP 3, P P-13 8, 57 P-15 8, 57 P-21 8, 57 P-29 8, PT PT-13 8, 57 PT-15 8, 57 PT-21 8, 57 PT-29 8, CT CT-13 1, 56 CT-15 1, 56 Red Ultra Dex CT-15P 1, 56 CT-29 1, 56 Red Ultra Dex CT-29P 1, UB SP-13 1, 56 SP-15 1, 56 SP-21 1, 56 SP-26 1, 56 SP-29 1, 56 Black Ultra Dex SP-29P 1, 56 SP-60 1, 56 SP-115 1, 56 TRI-1SP 1, A CAD-13A 15, 58 CAD-15A 15, 58 CAD-21A 15, 58 CAD-29A 15, SJ-13 6, 58 SJ-15 6, 58 SJ-21 6, 58 SJ-29 6, A SA-13 3, 57 SA-15 3, 57 SA-21 3, 57 SA-29 3, UB SPM-13 14, 56 SPM-15 14, 56 SPM-21 14, 56 SPM-29 14, 56 Black Ultra Dex SPM-29P 14, 56 Orange Ultra Dex SPM-29PO 14, UB RSPM-15 15, 56 SPM-21R 15, 56 RSPM-29 15, 56 Black Ultra Dex RSPM-29P 15, 56 Index - Viking Drill and Tool TYPES SETS PAGE Orange Ultra Dex RSPM-29PO 14, SM-29 18, 58 SM-60 18, T T , 58 T , 58 T , 58 T , 58 T , 58 T , TN TN-29 20, 58 TN-60 20, UB SPT , 58 SPT , 58 SPT , Q-15 5, 57 Q-29 5, 57 DC-4N 5, 57 DC-5N 5, R-15 5, 57 R-29 5, 57 R-29P 5, 57 R-115 5, UB RSP-15 2, 56 RSP-29 2, 56 Black Ultra Dex RSP-29P 2, 56 SP-21R 2, S & D-4 25, 58 S & D-8 25, 58 S & D-13 25, 588 S & D-33 25, MRO S & D-4MRO 25, UB S & D-4SP 24, 58 S & D-8SP 24, 58 S & D-13SP 24, 58 S & D-33SP 24, UBX S & D-4UBX 25, 58 S & D-8UBX 25, UB SP-6HHS 49 SP-6HHL 49 SP-8HH UB BR-8 48 BR UB SQE-4 48 BR-8SQ M-11 27, 58 M-13 27, 58 M-25 27, D D-11M 28, 57 D-13M 28, 57 D-19M 28, 57 D-25M 28, 57 D-41M 28, UB SP-11M 26, 56 SP-13M 26, 56 SP-19M 26, 56 SP-25M 26, 56 SP-41M 26, 56 SP-118M 26, 56 63

68 Viking Drill and Tool America s Finest High-Speed Steel Cutting Tools

69 Viking Drill and Tool America s Finest High-Speed Steel Cutting Tools

70 Viking Drill and Tool America s Finest High-Speed Steel Cutting Tools

71

72 Corporate Office and Manufacturing Facility: 355 State Street St. Paul, Minnesota Order Toll Free: (personally answered) (electronically answered) Phone: Fax: CAUTION: any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use. TERMS: NET 30 DAYS Minimum billing $ Orders less than minimum will be increased to $40.00 or assessed a $10.00 below minimum charge, whichever is less. Drop ship orders of less than $100 will be charged a $6.95 drop ship fee. Orders of $ or more net, are shipped pre-paid. Less than standard packaging, add $1.00 net per line item. Returned goods will not be accepted without prior approval. There is a 10% restocking charge. Prices subject to change without notice. Printed in the U.S.A. PLB Viking