DIN 3015 CLAMPS B1-1 PN# / / ACC
|
|
- Ashlie Goodman
- 6 years ago
- Views:
Transcription
1 DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. PN#0000 / 0.7 / ACC07 B
2 DIN 0 CLAMPS Overview HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. Our clamps assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. HRL Standard Duty (see pages B to B) Available to tube outside diameter. Recommended for systems with less than 00 PSI operating pressure and no dynamic loads. Bore Styles Standard duty, heavy duty, and twin series are available with either ribbed bores (standard) or smooth bore (special order). When ordering a smooth bore arrangements or clamp pairs, a G is inserted in the code directly after the HR i.e. HRGL, HRGS and HRGZ HRS Heavy Duty (see pages B to B7) Available to nominal pipe size Recommended for systems with greater than 00 PSI operating pressure, operations with pressure surges and applications with wide temperature fluctuations. Ribbed Bore (standard) Arrangements Various arrangements are available in each series. Smooth Bore smooth surface and chamfered edge prevent chaffing of hose (special) HRZ Twin (see pages B to B9) Available to / nominal pipe size Recommended for systems with less than 00 PSI operating pressure and no dynamic loads HREL Standard Duty w/ Rubber Insert (see pages B0 to B) Available to tube outside diameter Recommended for systems with less than 00 PSI operating pressure and no dynamic loads Provide for greater noise reduction and resistance to axial movement Weld Plate Crail Stacking Mounting Mounting Modules & Kits HRES Heavy Duty w/ Rubber Insert (see pages B to B) Heavy duty available to / bore diameter Provide for greater noise reduction and resistance to axial movement Materials Metal components are carbon steel (standard). Stainless steel is also available. Metal components to be welded (weld plates and crails) and heavy duty top plates size are phosphate coated, while all other metal components are zinc plated. Clamp pairs are polypropylene (standard). Polyamide and aluminum clamp pairs are also available. For specifications on these materials, see page B. Ordering Clamps can be ordered as complete arrangements, or separate components. See each series for details. B PN#0000 / 0.7 / ACC07
3 Technical Specifications Mounting Guidelines The first clamp should be mounted directly after the threaded connection or coupling. This protects the connection from vibrations. Bends in the line should be clamped on BOTH sides of the bend. The line should be clamped directly before and after any inline valves. Proper torquing of the clamp bolts is important, and is part of the DIN 0 Standard (see the chart below right for torque information) L DIN 0 CLAMPS Distance Between Clamps Pipe Distance (L) Tube Distance (L) / / / / / / / / 7 / / / 0 / / 0 7/ / 7 / 7 / 7 7 Bolt Tightening Torque Specifications Thread PP PA AL HRL (Std. Duty) 0 to /0 0 HRS (Heavy Duty) HRZ (Twin) & / 0 0 / 7/ 0 0 / 0 / / M M M /0 to / / Note: Torque is given in Nm (Nm x 0.77 = Ftlbs) Properties of Materials (clamp pairs) Properties Polypropylene PP Polyamide PA Aluminum AL Mechanical Properties Tensile Strength 00 psi psi Flexural Yield Strength 700 psi 000 psi Impact Strength (Izod Method) No Failure No Failure Tensile Test 000 psi Brinell Hardness No. 0 BHN Modules of Elasticity 9.7 x 0. x 0 psi Thermal Properties Continuous Service Temperature Range Electrical Properties Volume Resistivity Chemical Properties Chemical Resistance to 9 F 0 to 90 C 0 to F 0 to 0 C 7 to 00 F to 0 C 0 Ohmcm 0 Ohmcm Resistant to most aqueous solutions of inorganic salts, minerals, and organic acids, even at high temperatures. Resistant to organic solvents, dilute acids, and bases. Resistant to radiation. Resistant to neutral and sea water, organic acids, esters, oils, and inorganic salt solutions. PN#0000 / 0.7 / ACC07 B
4 DIN 0 CLAMPS HRL Standard Duty Clamps D 7 A with Weld Plate A without Weld Plate ATM for CRail Mounting (order CRail separately) (size to only) D Stacking Module (size 0 to only) A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Model Code HRL = Standard duty single clamp with ribbed bore HRGL = Standard duty single clamp with smooth bore Family 0 to (refer to table A on next page) Arrangement A = Single clamp with top plate and weld plate A = Single clamp without weld plate ATM = CRail mounted clamp D = Single clamp stacking module (size 0 only) Bore (refer to table A on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRL A.7 PP UNC B PN#0000 / 0.7 / ACC07
5 Dimensions 0 s CRail Nut CRail DIN 0 CLAMPS. () A.9 (0).7 (9.). () A A /" 0 UNC 9 (0). () H ø D H ø D H.9 (.) Plastic Cap H.0 (). (). () A. (0). () A. (0).0 () ø.9 (ø 0).9 ().0 (). Table A 0 7 Recommended Weight ød Bore Nominal Bolt A A A H H Arrangement Arrangement Tube O.D. Pipe A A 0. () 0. (.) / 0. (.0) / 0.7 (9.) / 0.9 (0) / 0.7 () 0. () 0. (.) / 0. (.0) / 0.7 (9.) / 0.9 (0) / 0.7 () 0.0 (.7) / 0. (.7) / 0. () 0.9 () 0. () / 0.7 (7.) / 0.7 () 0.7 (9) / 0.79 (0) 0. (.) / 0.7 () 0.9 () 0.9 ().0 (.).0 (.) /.0 (). (0). () /. (.7). ().0 () /.7 (0). () /.7 (.) /.9 (.) /.0 (0.).7 (0.). (.) /.7 (7) / (7.). (.9) PN#0000 / 0.7 / ACC07 N/A. (0).0 () 0. (). () 0.79 (0). (). () 0.) (). ().0 (). ().7 (0) 0.77 (9.). (9).0 ().97 (0).9 () 0. (.).9 ().7 (0). (9). (7) 0.9 ().9 ().0 (). (7).7 (70). (). ().0 (). (). (). (). (7).7 (9). (). ().97 (0).9 (00).7 (0). ().7 (.9). (). () Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. /0 x / (M x 0) /0 x / (M x 0) /0 x / (M x ) /0 x / (M x 0) /0 x / (M x ) /0 x / (M x 0) /0 x / (M x 70) /0 x (M x 00) /0 x (M x ) 0. (0.0) 0. (0.0) 0.7 (0.) 0. (0.) 0. (0.) 0. (0.9) 0. (0.) 0. (0.7) 0. (0.0) 0. (0.0) 0. (0.07) 0. (0.0) 0.7 (0.) 0. (0.) 0.0 (0.) 0. (0.).0 (0.) 0.7 (0.) B
6 DIN 0 CLAMPS HRS Heavy Duty Clamps A S with Weld Plate S without Weld Plate STM for CRail Mounting (size to only) (order CRail separately) A Stacking Module (size to 7 only) S + A Order one S (red) arrangement and one A (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Model Code HRS = Heavy duty single clamp with ribbed bore HRGS = Heavy duty single clamp with smooth bore Family to 0 (refer to table B on next page) Arrangement S = Single clamp with top plate & weld plate S = Single clamp without weld plate STM = CRail mounted clamp (sizes only) A = Single clamp stacking module (sizes 7 only) Bore (in mm) (refer to table B on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = Stainless Steel Thread Type UNC = Standard M = Metric (sizes, 9 and 0 available in Metric only) HRS S.7 PP UNC B PN#0000 / 0.7 / ACC07
7 Dimensions DIN 0 CLAMPS All s CRail Nut (sizes ) CRail Nut (size ) CRail (all sizes) A S ø.7 (ø ) /" UNC ø.79 (ø 0) 7/" UNC.0 (.7) H ø D H.79 (0). (.). ().9 (). (.) S. ().7 (). (7). (.) Table B A A PN#0000 / 0.7 / ACC07 B Recommended Weight Nominal Arrangement Tube O.D. Pipe A A A B H H S Bolt S S / / / / / /.0 ().7 (7).7 (). (0) 0.9 ().9 () 0. () / x / (M0 x ) 0. (0.) 0. (0.) / / ød Bore 0. (.0) 0. (.) 0. (.0) 0.7 (9.) 0.9 (0) 0. (0.) 0. (.7) 0. (.7) 0. () 0.9 () 0. () 0.7 (7.) 0.7 () 0.7 (9) / 0.79 (0) 0. (.) / 0.7 () 7/ 0.9 () (.) () () (70) (0) () () ().0 (.7) /. (). (0) 0.9 (). (0). () /. (.7) () (0) (00) () (0) () (7) (). () /.7 (0). () /. (0). () /. () /.7 (.) /.9 (.) /.0 (0.). (). (90.). (0). ().77 ().7 (). (0) 0.9 (0). (7) /.7 (0.). (.) /. ().7 (70) /. () /. ().7 (70).7 (7) /.0 () 7.09 (0).9 (). (0).7 (70). (0) 0.9 (0).0 (7.). (.9). ().7 (9).0 (0.) /. (0) /. (). ().07 (0). (0).9 (00) 7.7 (00) 0.9 (). (.) /. (90) 7. (). (9.7).07 (0) 0. (70) 9.9 (). (90). () 9.0 (0) 0.9 (). () 7. (9.7). (9.) 7/ 7 0. ().9 (0).0 (0).7 (0).0 (0).0 (0) 0.9 () (7.0).7 (.9) 0. (9) 0.7 (0). ().0 (0) 9. ().0 (70). (0) 0 (.) (0.) 0.7 (0 ).77 (0).0 (0) 7.09 (0). (90). (0). (0) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. ø.9 (ø ) ø.9 (ø ) /x/ (M0 x 0) / x / (M0 x 70) 7/ x (M x 00) / x / (M x 0) /0x7/ (M0 x 90) 7/9x/ (M x 0) M0 x 00 M0 x 0 M0 x 0.7 (0) 0.7 (0.) 0. (0.) 0.97 (0.) 0. (0.). (.7). (0.).7 (.99).0 (.). (.0).7 (.07).9 (7.) 9. (.).7 (.).9 (.) 9.9 (7.99).0 () 7. (7.0) 7.0 (0.). (9.) B7
8 DIN 0 CLAMPS HRZ Twin Clamps D A Twin Clamp with Weld Plate A Twin Clamp without Weld Plate ATM Twin Clamp for CRail Mounting (order CRail separately) (size to only) D Twin Clamp Stacking Module A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Model Code HRZ = Standard duty twin clamp with ribbed bore HRGZ = Standard duty twin clamp with smooth bore Family to (refer to table C on next page) Arrangement A = Twin clamp with weld plate A = Twin clamp without weld plate ATM = CRail mounted twin clamp D = Twin clamp stacking module Bore (in mm) (refer to table C on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRZ A PP UNC B PN#0000 / 0.7 / ACC07
9 Dimensions HRZ All s DIN 0 CLAMPS CRail Nut /" 0 UNC H H ø ø dd ø ø dd.0 () H A A A. (0). (). ().0 ().9 () 9 (0).9 (.) Plastic Cap CRail ø.9 (ø 0).0 () Table C ød Bore Recommended Nominal A A A H H H Bolt Tube O.D. Pipe 0. () 0. (.) / 0. () / 0.7 (9.) / 0.9 (0) / 0. (0.) / 0.7 () 0.0 (.7) / 0. (.7) / 0. () 0.9 () 0. () / 0.7 (7.) / 0.7 (9) / 0.79 (0) 0. (.) / 0.7 () 7/ 0.9 () 0.9 ().0 (.).0 (.7) /. (). (0). () /. (.7). (). () /.7 (0). () / 0.79 (0). (9). ().77 ().0 (). (7).7 ().7 (70). (). (0). ().09 (). (7). ().7 (0) 0.7 (.) 0.7 () 0.9 (.) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print..0 (). ().0 (7).0 (). (7). (). ().9 ().7 (.). (.). (9.). (7.).0 () /0 x / (M x ) / x / (M x ) / x / (M x ) / x (M x 0) / x / (M x 0) PN#0000 / 0.7 / ACC07 B9
10 DIN 0 CLAMPS HREL Standard Duty Clamps with Rubber Inserts 7 A with Weld Plate A without Weld Plate ATM for CRail Mounting (order CRail separately) (size to only) D Stacking Module A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Rubber Insert Model Code Family, (refer to table D on next page) Arrangement A = Single clamp with top plate and weld plate A = Single clamp stacking kit ATM = CRail mounted clamp D = Single clamp stacking module Bore (in mm) (refer to table D on next page) Clamp Material PP = Polypropylene PA = Polyamide Metal Components Materials (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HREL A.7 PP UNC B0 PN#0000 / 0.7 / ACC07
11 Dimensions All s CRail Nut CRail DIN 0 CLAMPS A A S /" 0 UNC 9 (0). () ød.9 (.) ød ød H Plastic Cap.0 (). () H.0 ().9 ().0 () A. (0) S ø.9 (ø 0). Table D EERubber Insert Recommended Nominal Clamp Bore Tube Hose O.D. ød O.D. Pipe Min. Max. 0. () () / (0) / () / L 0.0 (.7) / () () () / (7.) / (9) / (0) / () 7/ () / L.0 (7) / ().0.0. (0)... () /.. ød ød H H A A A S Bolt.00 (.). (9). (). () 0.9 (.).0 (.) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.. (7).0 (7).7 (0).0 (). (9). (). (7).9 () 0. () 0. () /0 x / (M x ) /0x / (M x 70) Parts KP = Clamp Pair EE = Rubber Insert (Santoprene TPE 7) HREL KP PP HRES / L EE * KP, (refer to table above) Clamp Pair EE / L, / L (refer to table above) Rubber Insert Clamp Material PP = Polypropylene PA = Polyamide Bore (in mm) (refer to table above) *HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page B to B for details. PN#0000 / 0.7 / ACC07 B
12 DIN 0 CLAMPS HRES Heavy Duty Clamps with Rubber Inserts 7 S with Weld Plate S without Weld Plate STM for CRail Mounting (size to only) (order CRail separately) A Stacking Module (size to only) S + A Order one S (red) arrangement and one A (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page B to B to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Rubber Insert Model Code Family to 7 (refer to table E on next page) Arrangement S = Single clamp with weld plate S = Single clamp stacking kit STM = CRail mounted clamp A = Single clamp stacking module Bore (in mm) (refer to table E on next page) Clamp Material PP = Polypropylene PA = Polyamide Metal Component Material (omit) = Carbon Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRES S PP UNC B PN#0000 / 0.7 / ACC07
13 Dimensions DIN 0 CLAMPS All s CRail Nut (sizes ) CRail Nut (size ) CRail (all sizes) A A ød S ø.7 (ø ) /" UNC ø.79 (ø 0) 7/" UNC.0 (.7) H ød ød H.79 (0). (.). ().9 (). (.). (7). ().7 (). (.) Table E Clamp / L / L 7 7 A EERubber Insert Recommended Nominal Bore ød Tube Pipe Hose O.D. O.D. in Min. Max. 0. () 0. () 0.9 (0) 0.7 () 0.0 (.7) 0. () 0.9 () 0. () 0. (7.) 0.7 (9) 0.79 (0) 0.7 () 0.9 ().0 (.9).0 (). (0). (). (.7). ().0 (). (0). ().79 (.).9 ().0 ().0 (.). (.). (0). ().7 (70).7 (7).99 (7).7 ().0 (9).70 (9).9 (0). (0).9 (). () B / / / / 7/ / / / S / / / / / / / ød ød B H H A A A S Bolt.00 (.). (9). ().0 (9).7 ().0 (). (). ().9 (7). (9).0 (). (). (0). (0).77 (). (0). (0). (90) 0.9 (.).0 (.). (.).70 (.). (9.).7 (.). (7).0 (7). (07).9 (7) 7.7 (97).9 (7) Notes:. Other bore diameters are available Consult factory for details.. Dimensions are in inches (mm) and lbs (kg).. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. ø.9 (ø ) ø.9 (ø ).7 (0).0 (). (90.).0 (). ().07 (0). (9). (). (0) 7.09 (0). () 0. (70). (7).9 (). ().9 ().07 (0) 9.9 ().7 (0) 0. () 0. () 0.9 (0) 0.9 (0) 0.9 () 0.9 ().0 () / x / (M0 x 0) / x / (M x 70) 7/x (M x 00) /x / (M x 0) /0x7 / (M0 x 90) 7/9x / (M0 x 0) Model Code KP = Clamp Pair KP to 7 (refer to table above) Clamp Pair Clamp Material PP = Polypropylene PA = Polyamide HRES KP PP EE = Rubber Insert (Santoprene TPE 7 sizes ) (Buna NBR 70 sizes 7) HRES / L EE.9 EE / L to 7 (refer to table above) Rubber Insert Bore (in mm) (refer to table above) Note: All other components for these clamps are the same as for HRS series heavy duty single clamps. Refer to page B to B for details. PN#0000 / 0.7 / ACC07 B
14 DIN 0 CLAMPS HRL, HRS, & HRZ Parts Hex Head Bolts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Bolt Model Code Model Code 0 / 0 x. SCREW H /0 X. GR SCREW H /0 X. SS / 0 x. SCREW H /0 X. GR SCREW H /0 X. SS / 0 x.0 SCREW H /0 X.0 GR SCREW H /0 X.0 SS / 0 x.0 SCREW H /0 X.0 GR SCREW H /0 X.0 SS HRL / 0 x.7 SCREW H /0 X.7 GR SCREW H /0 X.7 SS / 0 x.0 SCREW H /0 X.0 GR SCREW H /0 X.0 SS / 0 x.7 SCREW H /0 X.7 GR SCREW H /0 X.7 SS 7 / 0 x.00 SCREW H /0 X.00 GR / 0 x.00 SCREW H /0 X.00 GR Only available in METRIC see below / x.7 SCREW H / X.7 GR SCREW H / X.7 SS / x. SCREW H / X. GR SCREW H / X. SS / x.7 SCREW H / X.7 GR SCREW H / X.7 SS 7/ x.00 SCREW H 7/ X.00 GR SCREW H 7/ X.00 SS HRS / x. SCREW H / X. GR SCREW H / X. SS / 0 x 7.0 SCREW H /0 X 7.0 GR SCREW H /0 X 7.0 SS 7 7/ 9 x.0 SCREW H 7/9 X.0 GR SCREW H 7/9 X.0 SS HRZ 9 0 Only available in METRIC See below / 0 x. SCREW H /0 X.7 GR SCREW H /0 X. SS / x. SCREW H / X.7 GR SCREW H / X. SS / x.7 SCREW H / X.7 GR SCREW H / X.7 SS / x.00 SCREW H / X.00 GR SCREW H / X.00 SS / x.0 SCREW H / X.0 GR SCREW H / X.0 SS (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Bolt Model Code Model Code 0 M x 0 SCREW H M x 0. SCREW H M x 0 A M x 0 SCREW H M x 0. SCREW H M x 0 A M x SCREW H M x. SCREW H M x A M x 0 SCREW H M x 0. SCREW H M x 0 A HRL HRS HRZ M x SCREW H M x. SCREW H M x A M x 0 SCREW H M x 0. SCREW H M x 0 A M x 70 SCREW H M x 70. SCREW H M x 70 A 7 M x 00 SCREW H M x 00. SCREW H M x 00 A M x SCREW H M x. SCREW H M x A M0 x SCREW H M0 x. SCREW H M0 x A M0 x 0 SCREW H M0 x 0. SCREW H M0 x 0 A M0 x 70 SCREW H M0 x 70. SCREW H M0 x 70 A M x 00 SCREW H M x 00. SCREW H M x 00 A M x 0 SCREW H M x 0. SCREW H M x 0 A M0 x 90 SCREW H M x 90. SCREW H M x 90 A 7 M x 0 SCREW H M x 0. SCREW H M x 0 A M0 x 00 SCREW H M0 x 00. SCREW H M0 x 00 A 9 M0 x 0 SCREW H M0 x 0. SCREW H M0 x 0 A 0 M0 x 0 SCREW H M0 x 0. SCREW H M0 x 0 A M x SCREW H M x. SCREW H M x A M x SCREW H M x. SCREW H M x A M x SCREW H M x. SCREW H M x A M x 0 SCREW H M x 0. SCREW H M x 0 A M x 0 SCREW H M x 0. SCREW H M x 0 A B PN#0000 / 0.7 / ACC07
15 DIN 0 CLAMPS Top Plates Model Code HRL, HRS, HRZ Clamp HRL DP ST ZN Top Plate Material ST = Carbon Steel A = 0 Stainless Steel (Not available for HRS series) A = Stainless Steel Material Finish (omit) A and A Stainless Steel ZN = Zinc Plated ZN Ni = Zinc Nickel Plated (Standard for HRL and HRZ) Weld Plates Model Code HRL, HRS, HRZ Clamp HRL AP ST UNC BL Weld Plate Material ST = Carbon Steel A = 0 Stainless Steel (Not available for HRS series) A = Stainless Steel Thread Type UNC = Standard M = Metric Material Finish (omit) A and A Stainless Steel BL = Phosphate Coated (Standard) ZN = Zinc Plated ZN Ni = Zinc Nickel Plated PN#0000 / 0.7 / ACC07 B
16 DIN 0 CLAMPS HRL, HRS, & HRZ (cont d) Parts Safety Plates Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code HRL 0 HRL 0 SIP ST ZN HRL 0 SIP A HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A HRS HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A HRS SIP ST ZN HRS SIP A 7 HRS 7 SIP ST ZN HRS 7 SIP A HRZ HRZ SIP ST ZN HRZ SIP A HRZ / SIP ST ZN HRZ / SIP A Stacking Bolts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 & HRL/Z 0+ AF ST UNC ZN HRL/Z 0+ AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRL HRS HRZ HRL AF ST UNC ZN HRS AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRL AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC HRS AF ST UNC ZN HRS AF A UNC 7 HRS 7 AF ST UNC ZN HRS 7 AF A UNC HRL/Z 0+ AF ST UNC ZN HRL/Z 0+ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC HRZ AF ST UNC ZN HRZ AF A UNC (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 & HRL/Z 0+ AF ST M ZN HRL/Z 0+ AF A M HRL AF ST M ZN HRL AF A UNC HRL HRS HRZ HRL AF ST M ZN HRL AF A UNC HRL AF ST M ZN HRL AF A UNC HRL AF ST M ZN HRL AF A UNC HRL AF ST M ZN HRL AF A UNC HRS AF0 ST M ZN HRS AF0 A M HRS AF0 ST M ZN HRS AF0 A M HRS AF0 ST M ZN HRS AF0 A M HRS AF ST M ZN HRS AF A M HRS AF ST M ZN HRS AF A M HRS AF ST M ZN HRS AF A M 7 HRS 7 AF ST M ZN HRS 7 AF A M HRL/Z 0+ AF ST M ZN HRL/Z 0+ AF A M HRZ AF ST M ZN HRZ AF A M HRZ AF ST M ZN HRZ AF A M HRZ AF ST M ZN HRZ AF A M HRZ AF ST M ZN HRZ AF A M B PN#0000 / 0.7 / ACC07
17 DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Clamp Pair Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRL KP d PP HRZ = Standard Duty Twin (Ribbed Profile) HRGZ = Standard Duty Twin (Smooth Profile) Clamp Clamp Pair Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRZ KP dd PP HREL & HRES Clamps with Rubber Inserts KP HRES /L KP PP HREL, HRES Clamp Pair Material PP = Polypropylene PA = Polyamide EE HRES / L EE d * HREL, HRES Rubber Insert Bore Diameter (mm) Material TPE 7 = Santoprene TPE 7 NBR = Nitrile (Buna) TPE7 *HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page B to B for details. PN#0000 / 0.7 / ACC07 B7
18 DIN 0 CLAMPS HRL, HRS, & HRZ Parts CRail Nuts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 HRL 7 HRL 0 TM/ UNC ST ZN HRL 0 TM / UNC A HRS HRS TM/ UNC ST ZN HRS TM/ UNC A HRS TM7/ UNC ST ZN HRS TM7/ UNC A HRL 0 TM/ UNC ST ZN HRL 0 TM/ UNC A HRZ HRZ TM/ UNC ST ZN HRZ TM/ UNC A (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Model Code Model Code 0 HRL 7 HRL 0 TM M ST ZN HRL 0 TM M A HRS HRS TM0 M ST ZN HRS TM0 M A HRS TM M ST ZN HRS TM M A HRL 0 TM M ST ZN HRL 0 TM M A HRZ HRZ TM M ST ZN HRZ TM M A CRail B Carbon Steel,Phosphate Coated Stainless Steel Model Code Model Code HRL M HRL TS X ST BL M HRL TS X A M M HRL TS X ST BL M HRL TS X A M HRS M HRS TS 0X ST BL M HRS TS 0X A M M HRS TS 0X ST BL M HRS TS 0X A M HRZ M HRL TS X ST BL M HRL TS X A M M HRL TS X ST BL M HRL TS X A M PN#0000 / 0.7 / ACC07
19 HRL & HRS with Stainless Steel Metal Components HRL Standard Duty Description HRS Heavy Duty Clamps with stainless steel metal components are available for corrosive environments. Our complete line of DIN 0 clamps are available in stainless steel. Some models are special order, which may require minimum quantities, and/or extended delivery times. Listed here are the standard duty and heavy duty single clamps with weld plate. 0 Stainless Steel: (A) Available from stock UNC bolts Stainless Steel: (A) Salt water resistance HRL sizes in UNC available from stock HRS sizes in UNC Larger sizes in metric only Typical Arrangement with Weld Plate (HRL...A...) for Standard Duty (HRS...S...) for Heavy Duty Hex Head Bolts (SCREW H) Top Plate (DP) Clamp Pair (KP) Weld Plate (AP) CRail Nuts (TM) DIN 0 CLAMPS Stainless Steel UNC Stocked Program Light Duty (HRL) Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws Screw H /0 x. SS Screw H /0 x.0 SS Screw H /0 x.0 SS Screw H /0 x.7 SS Screw H /0 x.0 SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page B for available bore sizes Heavy Duty (HRS) Model Code Part Number Arrangements (complete with PP clamp pair) HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC Weld Plates HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC Top Plates HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A Ext Hex Screws Screw H /x.7 SS Screw H /x. SS Screw H /x.7 SS Screw H /x.00 SS Screw H /x. SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRS clamps on page B7 for available bore sizes CRail (TS) PN#0000 / 0.7 / ACC07 B9
20 DIN 0 CLAMPS HRL Standard Duty 0 stainless steel (A) metal components Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page B for available bore sizes. Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws ( Stainless Steel) SCREW H /0 x. SS SCREW H /0 x.0 SS SCREW H /0 x.0 SS SCREW H /0 x.7 SS SCREW H /0 x.0 SS SCREW H /0 x.7 SS HRL CRail HRL TS x A M 009 HRL CRail Nuts HRL 0 TM / UNC A 0070 stainless steel (A) metal components (metric) Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M Weld Plates (metric thread) HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Hex Head Bolts SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX70 A XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page B for available bore sizes HRS Heavy Duty stainless steel (A) metal components (metric) Model Code Part Number Arrangements (complete with PP clamp pair) XX = bore diameter HRS S XX PP A M A unique part number exists HRS S XX PP A M for each individual clamp bore HRS S XX PP A M diameter. A complete model HRS S XX PP A M code is sufficient for ordering. HRS S XX PP A M Use the dimensions table for HRS S XX PP A M standard HRS clamps on page B7 for available bore sizes. Weld Plates (metric thread) HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M Top Plates HRS DP A 000 HRS DP A 0009 HRS DP A 0000 HRS DP A 000 HRS DP A 000 HRS DP A 000 Hex Head Bolts (metric) SCREW H M0X A SCREW H M0X0 A SCREW H M0X70 A SCREW H MX00 A SCREW H MX0 A SCREW H M0X90 A HRS CRail HRS TS 0X A M 009 HRS CRail Nuts HRS TM 0 A M HRS TM A M B0 PN#0000 / 0.7 / ACC07
Clamps INNOVATIVE FLUID POWER NEW! U-Bolt Clamps HRRBS Series (see page 95) Line Sizes from 3/4 to 16 O.D.
Clamps Overview Standard Solutions HYDAC Manufactures a complete line of hose, tube, and pipe mounting components. For many years, these products have been successfully applied, worldwide. Our standard
More informationDimensions / Order Codes
Cushion Clamp Series Dimensions / Order Codes Clamp Assembly Types STC / SPC (for Use with Channel Rail SCS) G Design Load 1 D C ØD1 E B* Design Load 3 (Maximum Load in Pipe Direction) Design Load 2 Outside
More informationStainless Steel Seamless Tubing and Tube Support Systems
www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked
More informationStandard-Duty and Heavy-Duty Tube and Pipe Clamps
Standard-Duty and Heavy-Duty Tube and Pipe Clamps Table Of Contents Evolution of Clamps... 2 Tubing vs. Piping Difference/Comparison... 3 Features/Benefits of Clamps...4-5 Standard-Duty (Light-Duty) Clamps...6-7
More informationTOOLING & ACCESSORIES
Hose M Series - - Miniature worm drive hose clamps Stretch area inch M0200 0.25-0.62 6-16 M0300 0.30-0.7-22 M0400 0.66-1.25 16-32 M0500 0.66-1.50 16- M1100 2.50-3.50 64-90 For all clamping applications
More informationCustom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.
Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,
More informationSelect the basic design of your clamp assembly. A58.
Select the basic design of your clamp assembly. A58 A59 Material Code PP PA SA Basic Material Copolymeric Polypropylene Polyamide Aluminium AlSi12 Thermoplastic Elastomer Standard Colour Green Black Natural
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationStainless Steel Seamless Tubing and Tube Support Systems
Stainless Steel Seamless Tubing Fractional, Metric, and Imperial Sizes 1 Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation
More informationWater & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
More informationHEAVY DUTY BEVEL GEARBOX MODEL SB-V
FEATURES AND BENEFITS The SB-V series is suitable for use with Globe, Sluice and Knife Gate type valves and any other type requiring linear motion for thrust and torque applications Unique Top Entry replaceable
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationStandard Tube & Pipe Adapters
Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10,
More informationTOTAL PIPING SOLUTIONS, INC. Quick Cam. Rapid Seal Repair Clamp. Patent Pending Technical Specifications
TOTAL PIPING SOLUTIONS, INC. Quick Cam Rapid Seal Repair Clamp Technical Specifications Rev B July 2017 1. Pressure Rating: Quick Cam Rapid Seal Repair Clamps by when properly installed are capable of
More informationKEYSTONE SERIES GR RESIlIENT SEATED BUTTERFly VAlVES GRF
A heavy duty double flanged concentric design resilient seated butterfly valve FEATURES GENERAL APPLICATION These valves are for water or air service where a drop-tight shut-off and double flanged body
More informationSoft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
More informationBULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
More informationSPECIFICATION SERVICE SADDLE DOUBLE STRAP MODEL 317
Gasket Body Body Body Bale Assembly Bale Gasket Assembly Stud Gasket Assembly Stud Spherical Washer 1.25 3 SADDLE ASSEMBLY 4 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping branch
More informationFlow Meters with Float constructive series AF and BF for liquids and gases with remote flow indication
Flow Meters with Float constructive series AF and BF for liquids and gases with remote flow indication - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small
More informationiglide L250 Made specifically for applications with high rotations Very low coefficients of friction Excellent wear resistance
Made specifically for applications with high rotations Very low coefficients of friction Excellent wear resistance 299 - For high speeds For fast rotating applications Specially made for fast rotating
More informationAIR BLEED VALVES : ST1004 PIPE FLANGE KITS : "F3","F5","F6" SERIES
AIR BD VAVS : ST04 PIP ANG ITS : "3","5","6" SRIS General Information Pub. C-0 Air Bleed Valves...Page These air bleed valves are designed to use, at the start-up of the pumps, to bleed off the air enclosed
More informationA REVOLUTION IN PUMPING EFFICIENCY INTRODUCING THE NEW ALL-FLO PUMP. SIMPLE A simple leak free bolted design ensures quick and easy repairs EFFICIENCY
AIR OPERATED DOUBLE DIAPHRAGM PUMPS PRODUCT CATALOG A REVOLUTION IN PUMPING EFFICIENCY INTRODUCING THE NEW ALL-FLO PUMP. SIMPLE A simple leak free bolted design ensures quick and easy repairs EFFICIENCY
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationA. Division 01: Administrative, procedural, and temporary work requirements apply to this section.
Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 26 31 00.01 PHOTOVOLTAIC COLLECTOR ATTACHMENT SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Photovoltaic Collector Attachment
More informationAIR OPERATED DOUBLE DIAPHRAGM PUMPS
AIR OPERATED DOUBLE DIAPHRAGM PUMPS PRODUCT CATALOG A REVOLUTION IN PUMPING EFFICIENCY INTRODUCING THE NEW ALL-FLO PUMP. SIMPLE A simple leak free bolted design ensures quick and easy repairs EFFICIENCY
More informationThis specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
More informationBonded Seals. Description
Description Bonded Seals represent a combination of metal washer and elastomer sealing lip vulcanised to the edge of the metal part to seal bolted connections and mounting elements in all industrial applications
More informationReferences. Original SCHNORR safety washers.
Bolt Locking Systems References Original SCHNORR safety washers. Mowing machine The original SCHNORR safety washers were developed as a reliable and economic bolt locking device with the basic principle
More information94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in
More informationAVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
More informationPTFE Pipe Slide Assemblies
PTFE Slide Assemblies Overview Application Anvil PTFE pipe slide assemblies are designed to support the pipe and provide for lateral and axial movement due to thermal expansion and contraction of the piping
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationThe Keystone Series GRF is a heavy duty double flanged concentric design resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GRF is a heavy duty double flanged concentric design resilient seated butterfly valve aimed at general purpose applications. Features Double flanged body design with face-to-face dimensions,
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More informationKapil Enterprises. Made in India. Kapil Enterprises
Kapil Enterprises Made in India Kapil Enterprises 330, EHTP, HSIDC kundli industrial area District Sonepat 131 028 Haryana State, India Email: sales@bigboltnut.com Telephones + 91 ( 130 ) 211 9061 Cell
More informationMaterials : Ductile iron body EN GJS 500-7
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 PN10/16 flanges - 10 C + 70 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising
More informationLink-Seal Modular Seals Century-Line Sleeves Cell-Cast Disks
Link- Modular s Century-Line Sleeves Cell-Cast Disks The best way to permanently seal any cylindrical object, of any size, passing through any type of concrete barrier is to use Link- modular seals in
More informationHigh Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
More informationPSI Compakt Seals and Wall Sleeves with Fixed / Loose Flange
Pipeline Accessories PSI Compakt Seals and Wall Sleeves with Fixed / Loose Flange General Information Sectional View Technical Data 1 PSI Compakt Seals and Wall Sleeves with Fixed / Loose Flange General
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationAluminium hinges Aluminium hinges Further materials and surface finishes on demand. We will be pleased to give you advice.
Aluminium s Art.:6087 Art.:6023 Art.:6022 Art.:6848.70 Art.:158.5914 Art.:6876 Art.: 6088 Art.: 6872 Art.: 6871 Art.:158.5314 Art.:158.5414 Art.:158.5814 Art.:158.6117 Art.:158.6117 F-121 Aluminium piano
More informationPanelGrip Dry Glaze Glass Railing System
Metric Version PanelGrip Dry Glaze Glass Railing System Patent Pending Nationwide supplier of trims, mouldings and components for the glass and mirror industry. Reduces Labor Costs up to 80% Reduces Freight
More informationCD Capacitor Discharge The Process
CD Capacitor Discharge The Process. CD. Capacitor Discharge Why CD Studs are better CD. Capacitor Discharge General Specifications Weld Base: CD. Stud Load/Torque Strengths Stud Material Stud Size Maximum
More informationSUPPORT AND ANCHORS SECTION 15090
SUPPORT AND ANCHORS SECTION 15090 PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. Work included in this Section: Materials, equipment, fabrication, installation and tests in conformity with applicable codes
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationA. ASTM F Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems.
SECTION 221114 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the water distribution piping system, including potable cold, hot and hot water piping including associated fittings, and specialities
More informationDUBO retaining rings for socket head screws. DUBO toothed collar rings. KORREX protective caps for socket head screws. KORREX insulating bushes type I
DUBO retaining rings 10 10 DUBO retaining rings for socket head screws 11 DUBO toothed collar rings 15 KORREX nut caps 22 DUBO WORLDWIDE KORREX round nut caps KORREX snapcaps 24 17 KORREX protective caps
More informationRef RESILIENT SEAT GATE VALVE ISO PN10-16 F4. Model/Ref:
Model/Ref: 180-181 - 182 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 ISO PN10/16 flanges - 10 C + 110 C with EPDM wedge Max Pressure : 16 Bars up to DN400,
More information... self-lubricating and cost-effective...
xiros...... self-lubricating and cost-effective... $ $ New online service life calculator. Increased service life as a result of continuous development. www.igus.com/xiroslife plastics for longer life
More informationProduct Evaluation Report
Product Evaluation Report PER-09040 Page 1 of 5 This Document Published By: Initial Listing Re-Approved 5/12/2010 Progressive Engineering Inc. 58640 State Road 15 Goshen, Indiana 46528 574-533-0337 www.p-e-i.com
More informationDRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial
DRAINS: BATH,, SHOWER &, S COMMERCIAL SHOWER DRAINS GENERAL PURPOSE DRAINS FIT-FLUSH CLEAN-OUTS BATH WASTES BATH WASTES KITS/PARTS/COMPONENTS BATH DRAIN BODIES/ASSEMBLIES BATH DRAIN KITS/PARTS/COMPONENTS
More informationKor Inc. FLOCENTRIC TM ECCENTRIC PLUG
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG ECCENTRIC PLUG VALVE FLOCENTRIC TM The FLOCENTRIC Eccentric Plug Valve is manufactured using CNC equipment in a world class facility using the finest materials available.
More information.1 ANSI/ASME B31.1, Power Piping, (SI Edition)..2 American Society for Testing and Materials (ASTM)
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 03300 - Cast-in-Place Concrete.2 Section 05121 - Structural Steel for Buildings.3 Section 05500 - Metal Fabrications 1.2 REFERENCES.1
More information1 1 4" FRAMING SYSTEM
4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z
More informationSMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
More informationSPECIFICATION SERVICE SADDLE DOUBLE BALE MODEL 314
SPECIFICATION Body Body Gasket Gasket Bale Assembly Bale Nut Flat Washer Strap Assembly Stud Nut Flat Washer Spherical Washer 1 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
More informationSIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD
BLS BLS-P BLS A4 SD ILS LPA A4 PRODUCT DATA SHEET SUPERPLUS UNDERCUT ANCHORS SIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD www.sormat.com facebook.com/sormat youtube.com/sormatfixing
More informationº to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
More informationiglide A350 - Temperature and wear resistant
Compliant with both FD and EC Directive 10/2011 EC regulations Low moisture absorption Good with medium and high loads High temperature rating up to 356 F 447 - Temperature and wear resistant FD compliant,
More informationMETAL LADDERS (LADDER SAFETY GATE FALL PROTECTION)
Page 1 of 6 SECTION 05515 METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION) PART 1 - GENERAL 1.1 SECTION INCLUDES A. Specialty custom designed, spring assisted, self-closing LADDER SAFETY GATE (LSG) for
More informationVIKING JOHNSON EASIRANGE. Repair and Tapping Solutions
VIKING JOHNSON EASIRANGE Repair and Tapping Solutions EasiRange Repair and Tapping Solutions A C The Viking Johnson EasiRange has been developed to provide a comprehensive range of pipe repair and tapping
More informationMaterials : Ductile iron body EN GJS 500-7
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Flanges PN10/16-10 C + 70 C Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising stem Clockwise
More informationW A R R A N T Y. CSA standard B51 certified. Inspected and tested by the Technical Standards and Safety Authority of Canada.
FLEX-HOSE PRODUCT REPLACEMENT WARRANTY EXCEEDS W A R R A N T Y INDUSTRY STANDARDS CSA standard B certified. Inspected and tested by the Technical Standards and Safety Authority of Canada. Rubber **NEOPRENE/NYLON
More informationOVALNI ZASUN NP 10-16
procesna oprema OVALNI ZASUN NP 10-16 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 ISO PN10/16 flanges - 10 C + 110 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over
More informationSECTION HANDRAILS AND RAILINGS. A. Section Metal Fabrications: Associated metal supports.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Handrails and guardrails B. Guardrails for hatches and openings. C. Safety barriers. D. Roof edge protection. 1.2 RELATED SECTIONS
More informationSanitary Pressure Regulators RHPS Series
www.swagelok.com Sanitary Pressure Regulators RHPS Series Pressure-reducing regulators and tank blanketing regulators 316L stainless steel construction 1/2, 1, and 1 1/2 in. end connections Working pressures
More informationSuperstrut. Metal Framing. Pipe Straps, Pipe Clamps and Hangers
Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the American Standard Code for Pressure Piping. Hanger Design Pipe hangers are of advanced design
More informationROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING
ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity
More informationFlextray - Accessories
Flextray - 40 Flextray - Protects cable from debris and dust Adds security to cable installation Easy bend-over tabs secure cover to trays Available for 2 (50mm) to 24 (600mm) wide trays Comes in 118 (2997mm)
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationHollo-Bolt. Hollo-Bolt by Lindapter. Hollo-Bolt Options
Hollo- by Lindapter 37 Hollo- by Lindapter Installation is quickly carried out by inserting into pre-drilled steel and tightening with a torque wrench. Independent approvals include ICC-ES seismic accreditation,
More informationTubes and Pipes. Tubes and Pipes D-02
s and Pipes s and Pipes D-0 D-03 s and Pipes Contents s Tubing Selection Tubing Handling Gas Service Tubing Installation Suggested Allowable Working Pressure Tables Stainless Steel Seamless Tubing Carbon
More informationØ mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...
More informationDATASHEETS COATED U-BOLTS
DATASHEETS COATED U-BOLTS ESLIN NYLON COATED RILSAN COATED ABCITE COATED U-BOLTS FOR ANTI-NOISE AND ANTI-CORROSION APPLICATION SPECIAL: ESLIN COVERED U-BOLTS FOR GRE/GRP PIPING TO PREVENT CRUSHING THE
More informationPRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More information- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
More informationFLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
More informationWWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able
More informationStandard and Low-Flow 100 PLUS Powder Feed Pumps
Instruction Sheet P/N 036G Standard and Low-Flow 00 PLUS Powder Feed Pumps Introduction Standard and low-flow 00 PLUS powder feed pumps are used to pump organic and metallic powder coatings to powder spray
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationHousings & Accessories
HYDRA FORCE Housings & Accessories HydraForce offers standard cartridge valve housings and custom integrated circuit manifolds in aluminum, ductile iron, and steel. ALUMINUM HOUSINGS: Standard high tensile
More informationSMP Battery Powered Electromagnetic Flowmeters. Sizes 25, 50 & 80mm
Battery Powered Electromagnetic Flowmeters. Sizes 25, 50 & 80mm FEATURES Unobstructed flow. No moving parts. Ideal for bore water, irrigation, recycled water. Internal Battery powered. Built-in flowrate
More informationt y p e V S A S E W A G E P U M P
Pe r fo r m a n ce C h a r t 65 6 55 45 4 35 3 25 2 12 11 1 / 2 11 1 1 / 2 1 9 1 / 2 6% 7% 76% 7 1 HP 1/2 HP HP 76% 7% 6% C u r v e P a g e V S A - 5 1 1 5 R P M M O D E L : V S A - 6 H D I S C H A R G
More informationContinental Industries METER RISERS or FAX Visit
Continental Industries METER RISERS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationConcrete Inserts. B Adjustable Metal Deck Ceiling Bolt
B3019 - Adjustable Metal Deck Ceiling Bolt Size Range: 3 /8"-16 thru 3 /4"-10 rod Function: For use in metal deck formed concrete to attach hanger rods. Allows for pre-positioning of hanger rods in poured
More informationTHERMOWELL ASSEMBLIES & THERMOWELLS INDEX
THERMOWELL ASSEMBLIES & THERMOWELLS INDEX PAGE General Information & Part Numbering Examples... T2 RTD & T/C Style Thermowell Assemblies RTD'S for Thermowells (RT, RV, R4, RW, R1, R2, R5, or R8)... T3
More informationFitTech UP166F CHEST PRESS (FOOTING) UP166I CHEST PREES (IN GROUND) UP166S CHEST PRESS (SURFACE)
CHEST PRESS BASE COVER DESCRIPTION FOOTBUCK WELD ASSEMBLY HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER
More informationSECTION VIBRATION CONTROLS FOR PLUMBING PIPING AND EQUIPMENT
Page 220548-1 SECTION 220548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationThe Viking Johnson range of MaxiFit products - High tolerance pipe couplings - MAXIFIT
Including Large Diameter MaxiFit The Viking Johnson range of MaxiFit products - High tolerance pipe couplings - MAXIFIT Overview MaxiFit High tolerance pipe couplings B A C The Viking Johnson range of
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationModel B. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationhors Anc Eaton's B-Line series fasteners 183
183 Glossary Prefix - Description Screw Dia. Length Suffix ACB - Concrete Anchor Bolt 4 - #4 75-3 /4" AN - Acorn Nut ACPD - Bang-IT 6 - #6 81-13 /16" CH - Combo Head ACPW - Wood-Knocker 8 - #8 87-7 /8"
More informationMechanical Requirements for Stainless Steel & Non-Ferrous Fasteners
Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min
More informationREVISIONS App PC. App Sud. App Thom 2011/10/26 GS 2012/10/01 BL 2011/10/26. Pending GS 2012/10/01 BL 2012/10/23. Pending MDF 2011/10/26 GS 2013/04/22
1/14 Rev 1 2 3 Description Document format and number changed. Previous number 3503-02.01.621 Approved for use in Thompson Piping system Approval Requirements for MB updated Specification Reference Correction
More information