Aluminium Excellence Performance in Economical Way
|
|
- Silvester Lamb
- 6 years ago
- Views:
Transcription
1 OPPER CLAD Aluminium Excellence Performance in Economical Way Leading The Nation Towards Electrical Safety
2 With the growing industrialization, the demand of electrical safety is increasing day by day. Today as a renowned organization we are manufacturing the globally accepted electrical safety solutions as per every industry need. Our world of electrical safety is comprises Grounding & Bonding System, Exothermic Welding, Lightning Protection System and Surge Protection Devices. We are one stop solution provider from designing till installation. More than a decade of experience and an extensive research in the concerned field has led us to the fact that the Copper Theft is a worldwide topic of serious concern. Basically a dangerous crime, Copper Theft is growing very rapidly in Indian sectors like Railways, Electrical Power Stations, Oil & Gas Refineries and Petrochemical Units even from construction sites. An Industry, region, place doesn't matter, where there is a copper there is a thief. Consumption of Copper How an electrical safety industry is affected from copper theft? Copper itself an expensive material and the combination of physical properties such as strength, conductivity, corrosion resistance, machinability and ductility make copper suitable for a wide range of applications. Likewise, it offers wide advantages in Earthing and Lightning Protection. But the cost of this Theft Prone material is resisting a user by diverting them to go for cheaper and less quality solution. COPPER CLAD ALUMINIUM - Copper clad alumium is the cost effective replacement of solid copper and aluminium. - Copper clad aluminium conductor exhibits the same corrosion resistant properties as copper. - Copper clad aluminium offers better electrical conductivity. - Very less scraps value almost 0 %. - Maximizing performance. - Reliable service life. - Economical solution.
3 Copper Clad Aluminium Conductor Copper Clad Aluminium Conductor is a best suited solution for replacing pure aluminium, copper and GI cable or strip for above the ground applications. This is an electrical conductor with inner aluminum core and an outer copper cladding. It is made up of high grade aluminium core metallurgically bonded with pure copper coating of 10% or 15%. Copper clad aluminum conductor is available in a single strand of 8 mm dia. and it comes in a drum roll of length 500 meter to 10 km. Copper-clad aluminum conductor is highly recommended against pure aluminium as it is less flexible and tends to break more including low melting temperature. The solid aluminium had two inherent problems that led to its use being discontinued over time. First is because the vast majority of connectors & termination points in indoor wiring, Aluminium wiring is susceptible to galvanic corrosion at the connections points. Secondly, solid aluminum exhibits a relatively high rate of cold flow or creep. When connected under compression, the connections tend to loosen over time. Both Galvanic corrosion and cold flow can lead difficult to find intermittent connections. Copper-clad aluminum conductors, however, have neither of these problems. Features of Copper Clad Aluminium Conductor - Bimetallic material which combines the high conductivity advantage of copper and low density superiority of aluminum. - Copper clad aluminium conductor is available in the copper cladding ratio from 5%, 10% & 15%. - Copper is the worldwide standard for electrical availability due its high current carrying capacity. - Copper clad aluminium conductor is a best replacement of pure aluminium in lightning protection. - Copper clad aluminium conductor is a highly recommended as it offer light weight against pure copper. - An electrical conductivity of CCA conductor is higher than the pure aluminium conductor. - Copper clad aluminium provide better solderability property against pure aluminium. - Electrical connections are more reliable than pure aluminum. - Copper clad aluminium offers high melting point than pure aluminium. - Corrosion resistant property of CCA is equivalent to pure copper.
4 Copper Clad Aluminium Busbar Copper Clad Aluminium Busbar is a new conductor material used for substituting copper busbar. Owning excellent electronic conductivity and tensile strength, this busbar generally reduce the conductor material cost. Copper clad aluminium busbar adopts advanced processing, continuous rolling and direct casting techniques which make the copper layer and aluminium layer combining each other firmly and permanently. It is widely used in the electrical equipments such as bus way, high-low switchgear cabinet, wind power conductive rail, converter, box-type substation, communication power supply cabinet and other relevant application field. Copper clad aluminium busbar consists of a solid core of electrical grade aluminium with a pressure bonded outer layer of high conductivity copper. This compound has both advantages of better conductivity of copper and lower density of aluminium. It can reduce cost by 25% above compared with a copper bar of equal dimensions. It offers economical solution and weight saving advantages over solid copper, while retaining the surface properties of a copper busbar. This yields the maximum cost saving. Specifications of Copper Clad Aluminium:- Material: Copper and Aluminum Thickness: 25mm-300mm Width: 30mm-950mm Length: No more than 6000mm Volume Ratio: Cu: Al = 20%:80% Shape: Square, Rectangular or customize
5 Weigh up the benefits of Copper Clad Aluminium Busbar:- Reduce costs up to 40%: For the same dimension it saves 40% cost as compared to solid copper busbar. Reduce weight up to 60%: The density of aluminium is very light so overall weight reduced up to 60% than copper busbar. Reduce the cost of inventory: One meter of CCA busbar costs less than one meter of copper so inventory cost is reduced meaning lower financing costs. Less shipment cost: copper clad aluminium bar have lower weight means lower shipment cost to the customer. Advantages of Copper Clad Aluminium Busbar:- - Good Conductivity: Compared with the electrical property of pure copper busbar, AC current carrying capacity is 81%-84%. The Current Carrying Capacity of Copper Clad Aluminium is 80-85% of pure copper. - Light Weight: The copper clad aluminium busbar density is 37%-45% of pure copper busbar, so the length of this busbar is times of solid copper bar. Weight is reduced up to 60%. - Excellent Mechanical Property: Copper clad aluminium bar has excellent tensile strength, good elasticity. - Molecular bonding between Copper & Aluminium: Two different metallic material is joined permanently by molecular bonding & do not exist any physical defects. - Superior Extensibility & Reliability: Busbar has superior extensibility and reliability by which it is capable of bending, punching, and drilling. - Best Selectivity: Save copper resource to reduce production and matching cost and it is eco-friendly.
6 Follow Us: JMV LPS LIMITED W-50, Sector-11, Noida Delhi & NCR, India Ph: , Fax: web:
Contact Details The SDK Group (Shah Dipchand Kisnaji & Co/ B.R Metal/ Global IndiFest Inc), Sanjay Jain/ Kunal Jain Mumbai (India).
Contact Details The SDK Group (Shah Dipchand Kisnaji & Co/ B.R Metal/ Global IndiFest Inc), Sanjay Jain/ Kunal Jain Mumbai (India). Tel: +91-22-67438288/ +91-9820663840 / +91-9004551169 Email: sales@sdkmetals.com/
More informationFACTFILE: GCE TECHNOLOGY & DESIGN
FACTFILE: GCE TECHNOLOGY & DESIGN 1.3 METAL PART 1 Metal Part 1 Learning outcomes Students should be able to: Demonstrate knowledge of the available form of supply of metals; Understand the difference
More informationMetals Used in Network Wiring
Metals Used in Network Wiring Contents Introduction - Metals Used in Network Cable Wiring... 2 Category Cables, Cat5 Cable, Cat5e... 2 History of Metals in Use for Cable Wiring... 2 Using copper and the
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide labor, materials, equipment, and incidentals as shown, specified, and
More informationWind Power Solutions. Company Registration No: Vat Registration No.:
Wind Power Solutions Foundation Grounding and Construction, Bonding, Power Connections, Surge Protection, and Lightning Protection ERICO offers a complete range of foundation grounding and construction,
More informationthermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE
The Contractors Choice the Contractors Choice Founded in 1958, with locations in Tulsa and Broken Arrow, Oklahoma. is part of the Quality Brands of Continental Industries. TABLE OF CONTENTS THE PROCESS...4
More informationA HOUSE OF ALL TYPE OF METALSHEETS
A HOUSE OF ALL TYPE OF METALSHEETS AND ALL TYPES OF METAL PRODUCTS www.sonametals.com Page 1 BRASS PRODUCTS Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create
More informationSECTION LIGHTNING PROTECTION SYSTEM
SECTION 16670 - LIGHTNING PROTECTION SYSTEM PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. General: Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION GROUNDING
SECTION 16450 GROUNDING PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies general grounding and bonding requirements of electrical and telecommunication installations for personnel safety, equipment
More informationEffect Of Oxidation In Tin Coated Copper Bus Connections
Effect Of Oxidation In Tin Coated Copper Bus Connections Belden has brought out a line of cables that are all tinned copper. Tinned copper The Statue of Liberty is a famous example of copper oxidation.
More informationAlloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.
More informationGROUNDING SPECIFICATIONS FOR thermoweld EXOTHERMIC WELDING SYSTEM
GROUNDING SPECIFICATIONS FOR thermoweld EXOTHERMIC WELDING SYSTEM 1. Purpose This specification recommends criteria for use of thermoweld products to provide reliable permanent connections for utility,
More informationCABLE TERMINALS CABLE TERMINALS
CABLE TERMINALS CABLE TERMINALS Connection tubes 160 Isolated cable terminals 163 CABLE TERMINALS Cable terminals without isolation Connection tubes - GTY type Copper pipes with galvanic tin coating, used
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Updated format, division title, and removed references to other sections. - mgl44 A. Summary This section contains design criteria for the
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationWind Power Solutions CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
Wind Power Solutions CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER Foundation Grounding and Construction, Bonding, Power Connections, Surge Protection, and Lightning Protection nvent offers a complete range
More information1.0 Introduction David Chapman
1. Introduction David Chapman 1.1. About this Guide Busbars are used within electrical installations for distributing power from a supply point to a number of output circuits. They may be used in a variety
More informationDistribution Transformers - Energy Efficiency & Reliability
Distribution Transformers - Energy Efficiency & Reliability India Transformers Market Third world s largest transformer market (2013-14) Distribution 80,000 MVA Power 178,000 MVA Compounded production
More informationP r o d u c t s & T e c h n o l o g y
P r o d u c t s & T e c h n o l o g y 1 Products 2 Technology 1 Copper Connector of C-Type 2 Copper Connector of E-Type 3 Aluminum Connector 4 Copper Busbar 3 Production Process 1 Molding process 2 Cutting
More informationHigh-Strength Aluminum Wires for Low-Voltage Automotive Engine Wiring Harnesses
AUTOMOTIVE High-Strength Aluminum Wires for Low-Voltage Automotive Engine Wiring Harnesses Kinji TAGUCHI*, Takanobu SHIMADA, Jun YOSHIMOTO, Tetsuya KUWABARA and Yasuhiro AKASOFU ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More informationSECTION FACILITY LIGHTNING PROTECTION
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 41 00 FACILITY LIGHTNING PROTECTION SPEC WRITER NOTE: Delete between //----//if not applicable to project. Also delete any other item or paragraph not applicable
More informationALUMINIUM. v COPPER. Areas of Discussion /Contents. WILSONPOWERSOLUTIONS.CO.uk 01
ALUMINIUM v COPPER The electrical equipment industry is witnessing first-hand how a customer s purchase decision is being heavily influenced, by the finest of margins, when it comes to the two very similar
More informationSAMPLE. MEM05051A Select welding processes. MEM05 Metal and Engineering Training Package. Learner guide Version 1
MEM05 Metal and Engineering Training Package MEM05051A Select welding processes Learner guide Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5721 Acknowledgments
More information2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING
2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING E3305.3: now reads The space equal to the width and depth of the panelboard and extending
More informationNew Product Flyer Introduction
Dec. 5, 2013 New Product Flyer Introduction Preferred Lightning Protection, Inc. is excited to introduce our newest products and capabilities. Following are several new products with current inventories
More informationMSME Testing Centre, 65/1, G. S. T. Road, Guindy, Chennai, Tamil Nadu. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 7 I. TRANSMISSION LINE EQUIPMENT & ACCESSORIES ]] 1 Stockbridge Vibration dampers for Power lines Examination & IS 9708:1993 Cl. 7.2 Cl. 7.3 Mass pull off (Slip) Cl. 7.6 120
More informationC Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date:
Copper Alloy Data C17510 C17510 Tradename: Beryllium Copper Designation: Active? True Inactive Date: US EPA Registered Antimicrobial? True Chemical Composition Element Cu (1,2) Fe Ni Al Be Co Si Min (%)
More informationWhite Paper HELIAX FXL. Exploding the Myth of Galvanic Corrosion.
White Paper HELIAX FXL www.commscope.com Contents 3 Growing Use of Dissimilar Metals in RF Transmission Lines 3 CommScope Introduces HELIAX FXL 3 Why HELIAX FXL Smoothwall Cable? 3 Galvanic Corrosion 4
More informationContinuous Casting Mould Plates For Slab/ Bloom/ Beam Blank/ Vertical Casters
R Complete Competence in Copper Continuous Casting Mould Plates For / Bloom/ Beam Blank/ Vertical Casters Mould Plate Bloom Mould Plate Beam Blank Mould Plate Casting Bloom Casting Beam Blank Casting s
More informationIndian Copper Industry: Poised For Escalating Growth - Metalworld Research Team
Indian Copper Industry: Poised For Escalating Growth - Metalworld Research Team The copper industry is highly dependent on the performance of and demand for products like power and telecommunication cables,
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / 11-14
SECTION 270526 - GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationNATIONAL ELECTRIC POWER COMPANY (NEPCO) TENDER NO.8/2013 FOR THE SUPPLY OF CONDUCTORS FOR DOUBLE AND QUADRUPLE CIRCUITS 132 kv OHTL's
7.0 SPECIFICATION OF CONDUCTORS 7.1 GENERAL This Technical Specification covers the design, manufacture, testing, Packing, (CFR) supply and delivery into the dock of Aqaba Port in Jordan and guarantee
More informationComposite Materials. Metal matrix composites
Composite Materials Metal matrix composites Introduction The properties that make MMCs attractive are high strength and stiffness, good wear resistance, high service temperature, tailorable coefficient
More informationNYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017
SECTION 27 05 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCADWELD Welded High-Voltage Power Connections. For Underground and Subsea Cable Splicing
CADWELD Welded High-Voltage Power Connections For Underground and Subsea Cable Splicing Table of Contents Introduction... 2 3 CADWELD High-Voltage Welding Process... 4 CADWELD Electrical & Mechanical Performance...
More informationNATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER 2009 This memorandum consists of 5 pages. MARKING GUIDELINE -2- NC1520(E)(N3)/V QUESTION 1: GENERAL 1.1.1 True 1.1.2 True 1.1.3
More information1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature
More informationCONTENTS. B. System Design and Performance Requirements
16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or
More informationPerformance Evaluation of Crimped Terminations
International Journal of Electrical Engineering. ISSN 0974-2158 Volume 5, Number 2 (2012), pp. 167-172 International Research Publication House http://www.irphouse.com Performance Evaluation of Crimped
More informationEarthing in electrical network purpose, methods and measurement
Earthing in electrical network purpose, methods and measurement Earth / Ground Conductive ground whose electrical potential at each point is set equal to zero, It is a conductor which provides a low impedance
More informationINDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
More informationSPECIFICATIONS FOR Gas-to-Cable termination
Product GSM-145 1.0 APPLICATION: Gas-to-cable termination is a part of high voltage gas insulated indoor switchgear equipment. The component is intended for a high voltage system of 132 kv (AC), 50 Hz.
More informationCOPPER CABLES AND CONNECTORS (PTY) LTD.
CopperCables&Connectors(Pty)Ltd, established in 1990, specialises in design and manufacture or repair of Water-Cooled Furnace Cables, Air- Cooled Furnace Cables, Water-Cooled Resistance Welding Cables,
More informationCHAPTER 13 GROUNDING AND BONDING
GROUNDING AND BONDING CHAPTER 13 GROUNDING AND BONDING Grounding and bonding must be in accordance with Article 250 of the National Electrical Code (NEC). Bonding is defined in the NEC as the permanent
More informationSpring Pressure Connection Technology Vibration-Proof Fast Maintenance-Free
Spring Pressure Connection Technology Vibration-Proof Fast Maintenance-Free WAGO CAGE CLAMP Technology, Can Help Reduce Costs and Increase Safety in Your Applications! Contents Reduce Costs 4 Increase
More informationhttp://sidharthametals.com ABOUT US The inception of Sidhartha Metal Company dates back to the year 1987. Today SIMCO, an ISO 9001:2015 Certified Company is successfully manufacturing, exporting and supplying
More informationREA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
More informationAluminum Wiring. Facts and Figures
Aluminum Wiring by Nick Gromicko and Kenton Shepard Between approximately 1965 and 1973, single-strand aluminum wiring was sometimes substituted for copper branch-circuit wiring in residential electrical
More informationCopper sections for various applications
Copper sections Copper sections for various applications Company portrait The Wieland Group, with headquarters in Ulm, Germany, is one of the world s leading manufacturers of semi-finished and special
More informationCONTINUOUSLY TRANSPOSED CABLE
Form no.: SCC/51 Page 1 of 6 CONTINUOUSLY TRANSPOSED CABLE Shree Cables & Conductors Pvt. Ltd. increases its production range manufacturing CTC up to 96 conductors and different types of insulation CUSTOMISED
More informationSECTION GROUNDING AND BONDING
SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 260526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section
More informationLIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES
LIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES AIR TERMINAL AIR TERMINAL FIXING BASE (flat) Material Aluminium / Copper Model Al-300-16 / Cu-300-16 Model Al-16 / GM-16 Diameter 16mm
More informationWind Power Solutions
Wind Power Solutions Foundation Grounding and Construction, Bonding, Power Connections, Surge Protection, and Lightning Protection ERICO offers a complete range of foundation grounding and construction,
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
Translated English of Chinese Standard: GB50169-2016 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA UDC P GB 50169-2016
More informationCuSn0,15 (STOL 81) C14415 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties
More informationSECTION GROUNDING AND BONDING
SECTION 16060 GROUNDING AND BONDING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationGROUNDING MATERIAL PROTECTION BY GROUNDING 3.2
GROUNDING MATERIAL PROTECTION BY GROUNDING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-4132 Muttenz 1, Switzerland Phone ++41 (0)61 466 33 33, Fax ++41 (0)61 461 96 06 www.woertz.ch Woertz USA 151 Discovery
More informationHEAD OFFICE: RCI Industries & Technologies Ltd WORKS: B- 97, Wazirpur Industrial Area, Delhi Website:
HEAD OFFICE: RCI Industries & Technologies Ltd B- 97, Wazirpur Industrial Area, Delhi- 110052 Email: sales@rciind.com Website: www.rciind.com WORKS: Plot No. 84, HPSIDC, Baddi ( Distt- Solan) Phone: +91-2737-2194,97
More informationDURABLE, FULLY AUTOMATIC TERMINATION OF AL STRANDED CONDUCTORS USING THE LITEALUM CRIMP
DURABLE, FULLY AUTOMATIC TERMINATION OF AL STRANDED CONDUCTORS USING THE LITEALUM CRIMP Authors: Dr.-Ing. Helge Schmidt Fellow, Manager Advanced Terminal & Connector Development Automotive Engineering
More informationMetallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
More informationTECHNICAL ANALYSIS #2
TECHNICAL ANALYSIS #2 Problem Civista is wired using copper conductors only. Copper is an expensive material that is some opinions, offers the same performance from a much cheaper aluminum alloy alternative.
More informationA. All materials shall be tested and listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).
16450 GROUNDING ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 05 26 An optional keynote to the
More informationAREMA C&S Manual 2016 Part Recommended Application Criteria for Track-Circuit Bonding Revised 2016 (5 Pages) A. Purpose
A. Purpose Recommended Application Criteria for Track-Circuit Bonding Revised 2016 (5 Pages) Wiedmann, William 11/11/14 3:15 PM Wiedmann, William 11/11/14 3:15 PM This Manual Part recommends application
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society
More informationSECTION PART 1 GENERAL
SECTION 16060 GROUNDING AND BONDING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Grounding of electrical systems and equipment and basic requirements for ground for equipment, circuits, and systems.
More informationMANUFACTURER'S QUALITY ASSURANCE PLAN (QAP - Instrumentation cables)
POLARIS CABLES & WIRES PVT. LTD. (An IS & ISO 9001 :2000 Certified Company) Plant : Plot 35, Genesis Indl Complex, Kolgaon, PALGHAR, Dist :Thane, Maharashtra. MANUFACTURER'S QUALITY ASSURANCE PLAN (QAP
More informationMetal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
More informationDissimilar Metals DISSIMILAR METALS. Weld Tech News VOL 1. NO. 14
Dissimilar Metals Weld Tech News VOL 1. NO. 14 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationList of plant, machinery and list of test equipments available in house.
For Item code starting w i th 13 & 1 4 Transformer (Oil Filled/Dry Type): Details of supplies references of supplies made, for last three years, as per format A,B,C available in Annexure XVI duly notarized/certified
More informationCatalogue of European standards in the aluminium and aluminium alloys field
Catalogue of European standards in the aluminium and aluminium alloys field Under revision New publications during last two years (2017-2018) September 2018 David KRUPKA AFNOR Normalisation Industrial
More informationIRON, STEEL AND ALUMINIUM PRODUCTS
IRON, STEEL AND ALUMINIUM PRODUCTS NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODS 7207 Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: 1 7207110000 720711000
More informationMESH STRIP Metal Mesh EMI Gasketing
MESH STRIP Metal Mesh EMI Gasketing Customer Value Proposition: MESH STRIP gaskets are cost effective, resilient, highly conductive, knitted wire mesh strips used to provide electromagnetic interference
More informationKenya Power and Lighting Company VI Contract A31
Kenya Power and Lighting Company VI 4.1.6-1 Contract A31 4.1.6. TELECOMMUNICATIONS... 2 4.1.6.1. General requirements... 2 4.1.6.2. SCOPE OF WORK... 2 4.1.6.3. OPGW... 3 4.1.6.4. Optical Distribution Flames
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationMetals Ferrous and Non - Ferrous Icons key:
1 of 9 Metals Ferrous and Non - Ferrous Icons key: Flash activity. These activities are not editable. Accompanying worksheet. Teacher s notes included in the Notes Page. Useful websites for further information.
More informationENERGY PROTOLON(SMK) LWL. (N)TSKCGEWOEU Medium Voltage Reeling Cable with integrated Fibre Optics
ENERGY PROTOLON(SMK) LWL (N)TSKCGEWOEU Medium Voltage Reeling Cable with integrated Fibre Optics Technical Data Type Type designation Approvals/ standards Application PROTOLON (SMK) LWL (N)TSKCGEWÖU DIN
More informationPlasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
More informationOman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS 1 CHAPTER 7 : 2 METALS 3 Which of these things are
More informationTHERMAL SOLUTIONS HIGH FINNED TUBES GEWA-H, GEWA-HB
THERMAL SOLUTIONS HIGH FINNED TUBES GEWA-H, GEWA-HB HIGH FINNED TUBES GEWA-H, GEWA-HB APPLICATIONS GEWA-H and GEWA-HB high finned tubes are made of aluminium alloys or copper and copper alloys. They are
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More information31-SDMS-03 REV. 01 SPECIFICATIONS FOR
31-SDMS-03 REV. 01 SPECIFICATIONS FOR LOW VOLTAGE CABINET FOR POLE MOUNTED TRANSFORMER This specification is property of SEC and subject to change or modification without any notice CONTENTS Clause Description
More informationSECTION ORNAMENTAL WELDED STEEL FENCING
SECTION 032300 ORNAMENTAL WELDED STEEL FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationGeneric Requirements for Optical Fiber and Optical Fiber Cable
Contents Generic Requirements for Optical Fiber and Optical Fiber Cable Contents Telcordia GR-20 - Documentation Information Preface... Preface 1 1. Introduction... 1 1 1.1 Purpose and Scope... 1 1 1.2
More informationIndustrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³
Alloy Designation High Performance STOL Alloys EN CW 117 C* DIN CEN/TS 13388 UNS * chemical composition of STOL 8 has a higher Sn content up to,2 % We have developed a wide range of high performance alloys
More informationNPS/002/001 Technical Specification for Earthing Materials
Version:- 6.0 Date of Issue:- October 2017 Page 1 of 14 NPS/002/001 Technical Specification for Earthing Materials 1. Purpose The purpose of this document is to detail the requirements of Northern Powergrid
More informationHigh Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)
Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy
More informationIRON AND STEEL PRODUCTS
Announcement: Please be informed that the Fast Track Clearance facilities will expire on 21 st August 2013. In addition, with effective from 22 nd August 2013, all Certificate of Approval applications
More informationSECTION 2831 ITEM F-162 CHAIN-LINK FENCES
SECTION 2831 ITEM F-162 CHAIN-LINK FENCES PART 1 - GENERAL 1.1 DESCRIPTION. This item shall consist of furnishing and erecting a chain-link fence in accordance with these specifications and the details
More informationEnglish. Metawell Klimadecke 1
English Metawell Klimadecke 1 the lightweight panel WHAt is MEtAWEll? Metawell is a patented lightweight aluminium sandwich panel with two aluminium cover sheets and a corrugated core. Metawell flex is
More informationBILL OF MATERIALS Name of the work: F.T.S Modernisation Work
1 BILL OF MATERIALS Name of the work: F.T.S Modernisation Work Erection,Testing and commissioning of Converter transformer 3 PH,11 KV/2 X 1800 V,4000 KVA outdoor Transformer size of 3150 L X 2800 D X 3200
More informationPARTICULAR SPECIFICATION E11: GENERAL ELECTRICAL EARTHING AND LIGHTNING PROTECTION
E11 : General Electrical Earthing and LIGHTNING Protection PARTICULAR SPECIFICATION E11: GENERAL ELECTRICAL EARTHING AND LIGHTNING PROTECTION 1 2009-05-12 Review of Mechanical / Electrical and Control
More informationSABO EARTHING SOLUTION
SABO SABO EARTHING SOLUTION The installation and maintenance of an effective low resistance earthing system is essential due to the following- - Efficiently dissipate heavy fault currents and electrical
More informationTitle Cables for Railway Signalling Applications - Traction Return Bonding and Track Connection Cables
Discipline Engineering Standard NSW Category Signalling Title Cables for Railway Signalling Applications - Traction Return Bonding and Track Connection Cables Reference Number SPS 49 - (RIC Standard: SC
More information15~35KV Termination Kit
15~35KV Termination Kit Luyon Corporation 21221 Western Ave., #210 Torrance, CA 90501, U.S.A. Advantages of Silicone Rubber Power Cable Accessories Feature of silicone rubber: Silicone rubber is a unique
More informationCABLE MATERIALS CATALOG
CABLE MATERIALS CATALOG DEAR BUSINESS PARTNERS, Best wishes, Michael Xsu CONTENT Factory And Production Equipment 1 Quality Control 2 Copper Clad Aluminum Wire(CCA) 3 Copper Clad Aluminum Magnesium Wire(CCAM)
More informationNEC 2017 Code Changes Chapter 1 - General
NEC 2017 Code Changes Chapter 1 - General Changes from the 2014 code are highlighted in yellow. ARTICLE 110 - Requirements for Electrical Installations Part I. General 110.1 Scope. This article covers
More informationGage Series Stress Analysis Gages
GAGE SERIES All Micro-Measurements strain gages incorporate precision foil grids mounted on organic backing materials. The strain-sensing alloys and backing materials cannot be arbitrarily combined in
More informationALUMINIUM AND ARTICLES THEREOF
CHAPTER 76 ALUMINIUM AND ARTICLES THEREOF Note 1. In this chapter, the following expressions have the meanings hereby assigned to them: (a) Bars and rods: Rolled, extruded, drawn or forged products, not
More informationThermal Solutions. Based on Aluminium Extrusions 12,05 ` 0,15 R 1,5
Thermal Solutions Based on Aluminium Extrusions,05 ` 0,5 f f R,5 Local presence global competence invites you to take a look at our world of cooling solutions by utilizing and combining our expertise with
More information