Eurogel GCP / GCTC 500 Series Iso-modified

Transcription

1 Eurogel GCP / GCTC 500 Series Iso-modified s : Industrial, Transportation, Building, General purpose. Standard quality gelcoat, with stable storage and application properties. Good protection for polyester laminates under outdoor conditions. Answer all demanding process requirements. In mold Topcoat Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Density Eurogel GCP-512 Spray ,25 Eurogel GCP-522 Brush ,25 Eurogel GCP-512 AD (auto-démoulant) Spray ,25 Eurogel GCTC-512 Spray ,25 Eurogel GCTC-511 Spray ,25 Eurogel GCTC-522 Brush ,25 Eurogel GCTC-521 Brush ,25

2 Eurogel GCP / GCTC 600 Series 100% isophtalic s : Marine, Sanitary and Kitchen wares, Industrial, Transortation, Building. Special formulation to answer the most demanding outdoor end product requirements. High properties of hydrolysis resistance. In mold Topcoat Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Density Tensile strength Mpa Tensile modulus MPa Cured base resin properties Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Eurogel GCP-612 Spray , Eurogel GCP-611 Spray , Eurogel GCP-622 Brush , Eurogel GCP-621 Brush , Eurogel GCTC-612 Spray , Eurogel GCTC-611 Spray , Eurogel GCTC-622 Brush , Eurogel GCTC-621 Brush ,

3 Eurogel HQ-212 / HQ-212 TC Series Iso-NPG s : Marine, Swimming-pool, Spa, Industrial, Transportation, Building. Very high resistance to hydrolysis, UV radiations, and in marine environment. In mold Topcoat Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Density (± 0,5) Eurogel HQ-212 Spray ,3 Eurogel HQ-211 Spray ,3 Eurogel HQ-222 Brush ,3 Eurogel HQ-221 Brush ,3 Eurogel HQ-212 TC Spray ,3 Eurogel HQ-211 TC Spray ,3 Eurogel HQ-222 TC Brush ,3 Eurogel HQ-221 TC Brush ,3

4 Eurogel GCP 800 Series 100% vinylester s : Moulds, tanks Good resistance to temperature and chemical products. High gloss and hardness. Standard colours : green, black, transparent. In mold Topcoat Gel time / min (on 200gr mass, at 20 C, 1% LPT) Density (± 0,5) Tensile strength Mpa Cured base resin properties Tensile modulus MPa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Eurogel GCP-812 Spray , Eurogel GCP-811 Spray ,

5 Eurogel - Specific Topcoats Answer specific Top Coating requirements s : Marine, Transportation, Building, Wind-, Tank- and Other industries (Refer to Eurogel 500, 600, HQ and 800 for our standard topcoats) Mold Topcoat Geltime / min (on mass) Density (± 0,5) Eurogel GCTC-312 Brush/Roller Eurogel GCTC-313 Brush/Roller Eurogel GCTC-1201 Brush/Roller ,5-4 Eurogel LP-TC 1201 Brush/Roller Eurogel GCTC Brush/Roller (2% PMEC50, at 20 C on 200gr) 8-15 (2% PMEC50 at 20 C on 200gr) (1% PMEC50, at 20 C on 200gr) (2% PMEC50, at 23 C, on 100gr) (2% PMEC50, at 23 C on 200gr) 1,2 Very High surface tension. Satin/Gloss surface finish. High covering power. Possible to apply with one coat only according to support surface quality. Also possible to apply with 2 coats without sanding between layers. 1,2 Higher reactivtiy version of GCTC ,5 1,35 1,38 Higher covering power. Possible to apply with only one coat. Satin/Gloss surface finish. Air release additive included. High cost/performance ratio. Long gel time, higher thix index, superior covering power. Only one coat possible. Satin/Gloss surface finish. Air release additive included. High cost/performance ratio. Top Coat with anti skid properties (sand) for truck flooring construction. High covering power and abrasion resistance.

6 Eurogel - Products for repairs / High thixotropic paste s : all industries- Marine, Sanitary, Swimming-Pool, Transportation, Building, Wind, Tank (For in mold repair application, refer to Eurogel 500, 600, HQ and 800 brush versions ranges ) Mold Topcoat Geltime / min (at 20 C, on 200 gr mass, 1% of PMEC50) Density (± 0,5) Eurogel GCRTC Brush/Spatula ,1 High viscosity top coat. Fairing putty based on iso resin for finishing repair job. Good mechanical properties. High gloss. Eurogel HQRTC Brush/Spatula >8 _ 1,3 High viscosity top Coat. Fairing putty based on isonpg resin for finishing repair job. Good mechanical properties, high gloss. Pâte FT-711 Incolore Brush/Spatula ,1 High thixotropic paste. Specially developped to increase polyester gel coat thixotropy for making it usable by hand application (eg. Joint plane). High water resistance and gloss and color retention.

7 FSP-SC > Sprayable core material, thick and lightweight topcoat Density (± 0,05) Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) FSP-SC 1527 Spray , in sandwich construction, to replace fiberglass, felt, foam, and other core materials. High mechanical properties, high rigidity, no water uptake. Significant time savings, no roll, application up to 5mm in vertical without sagging. Improved surface quality (low exotherm, low shrink, fiber-marking reduction) Low styrene content. FSP-TC 1560 Spray ,5 0, as a thick top coat, to fill the surface defects of laminates. Good surface tension. Can be laminated over without sanding.

8 Protective coat directly applied behind gelcoat, to replace the first layer of laminated skin coat generally done with Iso or VE resin + fiberglass. Iso-Vinylester base 100% vinylester base Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) Time before over lamination / min Density (±0,5) FSP-BC 1701 T Spray ,8 ± 0,05 High thixotropy FSP-BC 1701 Spray ,8 ± 0,05 Low viscosity, high reactivity FSP-BC 1701/300 Brush ,8 ± 0,05 High viscosity, for hand application FSP-BC 1700 Spray ,8 ± 0,05 Low viscosity, high reactivity FSP-BC 1700 T Spray ,8 ± 0,05 High thixotropy FSP-BC 1101 Spray , ,15 ± 0,05 Special version for robot spraying.

9 Bonding pastes, Putties, anti-bubble/radius compounds, cavity fillers. Bonding paste Anti-bubble Cavity filling Density (± 0,05) Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) Exothermic peak / C (± 10 C) FSP-HV , FSP-HV , FSP-HV , FSP-HV , FSP-HV , Low density product, high rigidity, no water uptake. in high thickness. Polyvalent product. Core material bonding (PU & PVC foams, balsa, etc). Medium reactivity. Smooth to apply. Polyvalent product. Core material bonding (PU & PVC foams, balsa, etc). Low reactivity. Smooth to apply. Polyvalent product. Anti-bubbles and bonding paste, very low reactivity. Smooth to apply. Ideal for big parts and before injection. Bonding paste, for balsa, PU & PVC foams, etc. Smooth to apply. Medium reactivity. Low shrink. Fast version available. FSP-HV 1537 S , Bonding-paste, similar to 1537, with higher reactivity. FSP-HV 1538 FIBRE ,5 1, Fibre-reinforced bonding paste. Good flexibility and low shrink. Smooth to apply. High thixotropy for thickness application. Fast version available. FSP-HV 1538 S FIBRE ,5 1, Fibre-reinforced bonding paste, similar to 1538 with higher reactivity. FSP-VE ,5 1, % vinlyester non-filled bonding paste, for high performance structural bondings. Hand or machine application.

10 RESIMER 400 Series, Orthophtalic base Good mechnical properties and heat resistance, excellent wetting properties, for general purpose applications. Accelerated Thixotroped Density (±0,05) Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Exothermic peak / C ± 10 C Tensile strength Mpa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Resimer 400 2,5-3,5 1,1 8-11* ,5 80 Medium reactivity Resimer 400 HK 5-7 1,1 8-11* ,5 80 Medium reactivity, for tropical climate. Resimer , ,5 80 Adapted to warm seasons Resimer 411 S , (3% de PMEC) ,5 80 Lightly accelerated, tropicalized. Resimer 411 Blanche , ,5 80 Adapted to warm seasons Resimer , ,5 80 Winter version Resimer 412 Blanche , ,5 80 Winter version * with addition of 0,5% of cobalt (solution at 6%) in the resin

11 RESIMER 500 Series, orthophtalic base, Low Styrene Emission Low styrene content and low reactivity, for spray up application in high thickness. Accelerated Thixotroped Density (±0,5) Gel time / min (sur masse de 200gr, à 20 C, 1% PMEC 50) Exothermic peak / C ± 10 C Tensile strength Mpa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Resimer 511 Bleue , ,5 80 Resimer 512 Bleue , ,5 80 Blue resin with high thix. for good application properties in vertical. Controlled exothermic peak. Low reactivity. Blue resin with high thix. for good application properties in vertical. Controlled exothermic peak. High reactivity.

12 RESIMER 600 Series, isophtalic base Good mechanical properties, good resistance to hydrolysis and chemical products. High wetting properties. Good storage stability. For laminates requiring high mechanical performance. Accelerated Thixotroped Density (±0,5) Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Exothermic peak / C ± 10 C Tensile strength Mpa Tensile modulus MPa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Resimer ,1 8-12* Medium reactivity Resimer , Medium reactivity, adapted to warm and wet environments Resimer 611 S , (3% de PMEC) Tropicalised resin, better storage stability Resimer , Winter version (high reactivity) * with addition of 0,5% of cobalt (solution at 6%) in the resin

13 RESIMER 800 Series, 100% vinylester base Excellent mechanical and chemical resistance. Good resistance to corrosion and hydrolysis. For high performance applications. Accelerated Thixotroped Density (±0,5) Gel time / min (sur masse de 200gr, à 20 C, 1% PMEC 50) Exothermic peak / C ± 10 C Tensile strength Mpa Tensile modulus MPa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Resimer , Low reactivity Resimer , High reactivity

14 Casting resins Density (±0,5) Thix. index Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) Exothermic peak / C MDC-LP ,8 2, ± 70 MDC , ± 75 Low density, good casting properties, low shrink close to 0. Sans charge abrasives. Low shrink, good reproduction of details, no abrasive fillers. Ideal for rotomoulding process.

15 FSP-NR > No-roll lightweight product Density (± 0,05) Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) FSP-NR 1556 Spray , Lightweight product, for no-roll spray up application (simultaneous spray with fiberglass). Fast cure, low shrink and exotherm. Improved productivity.

16 Barrier-Coat : Protective coat applied directly behind gelcoat, to replace the first layer of laminated skin coat generally done with VE or Iso resin + fiberglass. Iso-Vinylester base 100% vinylester base Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) Time before over lamination / min Density (±0,5) FSP-BC 1700 Spray ,8 ± 0,05 Low viscosity, high reactivity. FSP-BC 1700 T Spray ,8 ± 0,05 High thixotropy

17 CNC > Tooling pastes for CNC-machined plugs and models Base Gel time / min (on 100gr mass, at 20 C, 2% MEKP 50) Density (±0,5) Shore D Hardness HDT / C in film CNC-2002 HS Hand / Extrusion Polyester > , Low reactivity, specially adapted to thick single layer application, by extrusion, with drum pump equipment (viscous product equipment). CNC-3000 LG Spray Polyester / VE >3, , Hybrid base, higher hardness and heat resistance.

18 Gel time / min (on 250gr mass, at 20 C, 2% MEKP 50) Density (± 0,05) EUROLAQUE BLANCHE Brush or spray , ,25 White polyester laque for the finishing of plugs, moud refit, or various topcoat uses. Easy to sand. High gloss. Good aging properties.

19 Eurogel GCP 800 Series, 100% vinylester base s : Moulds, tanks Good resistance to temperature and to chemical products. High gloss and hardness. Standard colours : green, black, transparent. In mold Topcoat Gel time / min (on 200gr mass, at 20 C, 1% LPT) Density (± 0,5) Tensile strength Mpa Cured base resin properties Tensile modulus MPa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Eurogel GCP-812 Spray , Eurogel GCP-811 Spray ,

20 Polyester primers for the finishing of models and plugs, and preparing of metal parts before painting. Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Can be sanded after / min Density (± 0,05) PRIMER 1206 Pot gun / Machine ,25 Easy to sand, low paper clogging. Good surface appearance, no porosité, satin finish. Allows a fast repair of surface defects. Low styrene emission. PRIMER 1202 Machine ,15 PRIMER 5000 Hand ,5 5, ,5 Very high reactivity. Fast dry. Very good surface tension. Enables thinner layers. Easy to sand. Low paper clogging.. Excellent adhesion to cast iron and other metals. Resistant to corrosion. Low styrene content. Finishing primer for hand application, to fill, or repair surfaces before painting. Catalyze with MEKP 50. Fast cure. Easy sanding. High rigidity and HDT.

21 RESIMER 800 Series, 100% vinylester base Excellent mechanical and chemical resistance. Good resistance to corrosion and hydrolysis. RESIMOLD Series Fast moulding system with very low shrink. Accelerated Thixotroped Density (±0,5) Gel time / min (on 200gr mass, at 20 C, 1% MEKP 50) Exothermic peak / C ± 10 C Tensile strength Mpa Tensile modulus MPa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / C Resimer , Low reactivity Resimer , High reactivity Resimold , (1,5% MEKP50) ,8 100 Low shrink resin for mould production. Fast process. Excellent dimensional stability.

22 FSP-SC > Sprayable core material Thix. index Density (± 0,05) Gel time / min (on 130gr mass, at 20 C, 2% MEKP 50) FSP-SC 1527 Spray , in sandwich construction, to replace fibreglass, felt, foam, and other core materials. High mechanical properties, high rigidity, no water uptake. Significant time savings, no roll, application up to 5mm in vertical without sagging. Improved surface appearance (low exotherm, low shrink, reduction of fiber-marking) Low styrene content. For further nformation please refer to Products & s pages:

23 TR Industries : Release agents and mould care products. Référence Description Conditionnement TR 104 Wax release, with high temperature resistance Boite de 400 gr TR 214 Mold cleaner - Liquid, without toluene, for cleaning and reuse wax 1 Gallon TR 315 Strong polish compound, fast elimination of scratches and other surface defects. Can be followed with TR-311 to reach a high quality finishing with high gloss. 1 Gallon TR 900 Semi-permanent liquid agent 1 Gallon TR 905 Cleaning solvent - very high cleaning power 1 Gallon TR 910 Semi-permanent liquid sealer 1 Gallon TR 940 One shot sprayable semi-permanent liquid agent 1 Gallon