Stephan Adam, SURAGUS GmbH

Perspectives for inline metrology introduction

Perspectives for inline metrology introduction System selection and dimensioning strategies SURAGUS GmbH Efficient Testing Solutions SURAGUS GmbH Maria-Reiche-Str. 1 01109 Dresden Germany info@suragus.com

Supplementary Figure S1 Photograph of MoS 2 and WS 2 flakes exfoliated by different metal naphthalenide (metal = Na, K, Li), and dispersed in water.

Supplementary Figure S1 Photograph of MoS 2 and WS 2 flakes exfoliated by different metal naphthalenide (metal = Na, K, Li), and dispersed in water. Supplementary Figure S2 AFM measurement of typical LTMDs

Layer Thickness Analysis of Thin Metal Coatings with. Bruker Nano Analytics, Berlin, Germany Webinar, June 8 th 2017

Layer Thickness Analysis of Thin Metal Coatings with micro-xrf on SEM Bruker Nano Analytics, Berlin, Germany Webinar, June 8 th 2017 09.06.2017 Presenters Stephan Boehm Product Manager Micro-XRF/SEM Bruker

TFS PRODUCTION SOLUTIONS. TFS Production Solutions. For thin-film solar modules

TFS PRODUCTION SOLUTIONS TFS Production Solutions For thin-film solar modules 2 TFS PRODUCTION SOLUTIONS MANZ AG 3 TFS PRODUCTION SOLUTIONS MANZ AG GERMAN ENGINEERING INTERNATIONALLY STAGED GLOBAL REFERENCES

TFS PRODUCTION SOLUTIONS. TFS Production Solutions. For thin-film solar modules

TFS PRODUCTION SOLUTIONS TFS Production Solutions For thin-film solar modules 2 TFS PRODUCTION SOLUTIONS MANZ AG 3 TFS PRODUCTION SOLUTIONS MANZ AG GERMAN ENGINEERING INTERNATIONALLY STAGED GLOBAL REFERENCES

IMRE/ETPL Flagship Project

IMRE/ETPL Flagship Project Nanoparticulate Barrier Films & Gas Permeation Measurement Techniques for Thin Film Solar & Display Application Problems Senthil Ramadas Institute of Materials Research & Engineering

Visit

Practical Applications for Nano- Electronics by Vimal Gopee E-mail: Vimal.gopee@npl.co.uk 10/10/12 Your Delegate Webinar Control Panel Open and close your panel Full screen view Raise hand for Q&A at the

KGC SCIENTIFIC TYPES OF SOLAR CELL

KGC SCIENTIFIC www.kgcscientific.com TYPES OF SOLAR CELL How Photovoltaic Cell Work When sunshine that contain photon strike the panel, semiconductor material will ionized Causing electron to break free

Supplementary Figure 1. (a-d). SEM images of h-bn film on iron foil with corresponding Raman spectra. Iron foil was reused for re-growth of h-bn

Supplementary Figure 1. (a-d). SEM images of h-bn film on iron foil with corresponding Raman spectra. Iron foil was reused for re-growth of h-bn after bubbling transfer. Scale bars (ad) 20 μm. Supplementary

2Dlayer Product Catalog

2Dlayer Product Catalog Your idea, Our materials! We provide solutions, not just materials. Tel.: 1-919-228-9662 Email: info@2dlayer.com URL: http://2dlayer.com We accept purchase orders and all kinds

Advanced Glass Refinement by Thin Films - Trends and Challenges of Thin Film Technologies for Windows and Facade Glasses

Advanced Glass Refinement by Thin Films - Trends and Challenges of Thin Film Technologies for Windows and Facade Glasses Dr.-Ing. Manuela Junghähnel Fraunhofer Institute for Elect ron Beam and Plasma Technology

ATOMIC LAYER DEPOSITION OF 2D TRANSITION METAL DICHALOGENIDES

ATOMIC LAYER DEPOSITION OF 2D TRANSITION METAL DICHALOGENIDES Annelies Delabie, M. Caymax, B. Groven, M. Heyne, K. Haesevoets, J. Meersschaut, T. Nuytten, H. Bender, T. Conard, P. Verdonck, S. Van Elshocht,

Rapid CVD growth of millimetre-sized single-crystal graphene using a coldwall

Rapid CVD growth of millimetre-sized single-crystal graphene using a coldwall reactor Vaidotas Mišeikis 1 D. Convertino 1,2, N. Mishra 1, M. Gemmi 1, T. Mashoff 1, S. Heun 3, N. Haghighian 4, F. Bisio

Glass Wafer. Specification

Glass Wafer Specification Glass Wafer Specification SCHOTT Thin Glass and Wafer products are the result of deep technological expertise. With a product portfolio of more than 100 optical glasses, special

Laser-Crystallised Thin-Film Polycrystalline Silicon Solar Cells. Jonathon Dore SPREE Research Seminar - 27th June, 2013

Laser-Crystallised Thin-Film Polycrystalline Silicon Solar Cells Jonathon Dore SPREE Research Seminar - 27th June, 2013 Contents Introduction motivation for thin-film Thin-film PV technologies Diode laser

Glass Wafer. Specification

Glass Wafer Specification Glass Wafer Specification SCHOTT Thin Glass and Wafer products are the result of deep technological expertise. With a product portfolio of more than 100 optical glasses, special

High Rate low pressure PECVD for barrier and optical coatings

High Rate low pressure PECVD for barrier and optical coatings, Matthias Fahland, John Fahlteich, Björn Meyer, Steffen Straach, Nicolas Schiller Outline Introduction PECVD New developments magpecvd arcpecv

Supporting Information for

Electronic Supplementary Material (ESI) for Nanoscale. This journal is The Royal Society of Chemistry 2015 Supporting Information for Large-Scale Freestanding Nanometer-thick Graphite Pellicle for Mass

Lecture 22: Integrated circuit fabrication

Lecture 22: Integrated circuit fabrication Contents 1 Introduction 1 2 Layering 4 3 Patterning 7 4 Doping 8 4.1 Thermal diffusion......................... 10 4.2 Ion implantation.........................

EECS130 Integrated Circuit Devices

EECS130 Integrated Circuit Devices Professor Ali Javey 9/13/2007 Fabrication Technology Lecture 1 Silicon Device Fabrication Technology Over 10 15 transistors (or 100,000 for every person in the world)

Transparent conducting graphene electrodes for photovoltaic applications

Transparent conducting graphene electrodes for photovoltaic applications Luca Ortolani 1, Caterina Summonte 1, Rita Rizzoli 1, Meganne Christian 1, Isabella Concina 2,3, Gurpreet S. Selopal 2,3, Riccardo

Specimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process

Specimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process by Kozue Yabusaki * and Hirokazu Sasaki * In recent years the FIB technique has been widely used for specimen

From Vacuum to Atmosphere and back an in-house Process Chain for Different Products

From Vacuum to Atmosphere and back an in-house Process Chain for Different Products Dr. Steffen Günther Vacuum coating low pressure 10-1 10-4 Pa (10-3 10-6 mbar) unhindered particle movement no unintended

The next thin-film PV technology we will discuss today is based on CIGS.

ET3034TUx - 5.3 - CIGS PV Technology The next thin-film PV technology we will discuss today is based on CIGS. CIGS stands for copper indium gallium selenide sulfide. The typical CIGS alloys are heterogeneous

è Coating technologies and coating plant concepts for thin film liquid coating layers

è Coating technologies and coating plant concepts for thin film liquid coating layers Andrea Glawe Technical Sales 1 Source: plastic electronics 22nd IFATCC-Congress Stresa 2010 www.coatema.de Outline

Supporting Information. graphene oxide films for detection of low. concentration biomarkers in plasma

Supporting Information Wafer-scale high-resolution patterning of reduced graphene oxide films for detection of low concentration biomarkers in plasma Jinsik Kim a, Myung-Sic Chae a, Sung Min Lee b, Dahye

Activities in Plasma Process Technology at SENTECH Instruments GmbH, Berlin. Dr. Frank Schmidt

Activities in Plasma Process Technology at SENTECH Instruments GmbH, Berlin Dr. Frank Schmidt The Company Company Private company, founded 1990 80 employees ISO 9001 Location Science & Technology Park,

CHAPTER 4. SYNTHESIS OF ALUMINIUM SELENIDE (Al 2 Se 3 ) NANO PARTICLES, DEPOSITION AND CHARACTERIZATION

40 CHAPTER 4 SYNTHESIS OF ALUMINIUM SELENIDE (Al 2 Se 3 ) NANO PARTICLES, DEPOSITION AND CHARACTERIZATION 4.1 INTRODUCTION Aluminium selenide is the chemical compound Al 2 Se 3 and has been used as a precursor

ANALYTICAL SERVICES X-RAY SCATTERING ATOM PROBE TOMOGRAPHY RAMAN SPECTROSCOPY TIME-OF- FLIGHT SECONDARY ION MASS SPECTROMETRY FOCUSED ION BEAM (FIB)

FRAUNHOFER INSTITUTE FOR PHOTONIC MICROSYSTEMS C ENTER N ANOELECTRONIC TECHNOLOGIES (CNT) Fraunhofer IPMS Center Nanoelectronic Technologies (CNT) Königsbrücker Str. 180 01099 Dresden I Germany www.cnt.fraunhofer.de

Copper Interconnect Technology

Tapan Gupta Copper Interconnect Technology i Springer Contents 1 Introduction 1 1.1 Trends and Challenges 2 1.2 Physical Limits and Search for New Materials 5 1.3 Challenges 6 1.4 Choice of Materials 7

Photovoltaics & Solar Thermals. Thin-film equipment. Customized. FHR Anlagenbau GmbH I

Photovoltaics & Solar Thermals Thin-film equipment. Customized. FHR Anlagenbau GmbH I www.fhr.de FHR Anlagenbau GmbH is an innovative enterprise in the branch of vacuum processing and thin-film technologies.

Microstructural Characterization of Materials

Microstructural Characterization of Materials 2nd Edition DAVID BRANDON AND WAYNE D. KAPLAN Technion, Israel Institute of Technology, Israel John Wiley & Sons, Ltd Contents Preface to the Second Edition

AIMCAL R2R Conference

Contents Introduction Markets OLED Structures Technology Fabrication Process Evaluation (Microstructure & etc) Summary Introduction [Merit of Rigid OLED Display] Cheap product cost Mass production Free

2006 UPDATE METROLOGY

INTERNATIONAL TECHNOLOGY ROADMAP FOR SEMICONDUCTORS METROLOGY THE ITRS DEVED AND INTENDED FOR TECHNOLOGY ASSESSMENT ONLY AND WITHOUT REGARD TO ANY COMMERCIAL CONSIDERATIONS PERTAINING TO INDIVIDUAL PRODUCTS

Nanoscale Barrier Coating on BOPP Packaging Film by ALD Presented by: Dr. Johanna Lahti Senior Research Fellow Tampere University of Technology

Nanoscale Barrier Coating on BPP Packaging Film by ALD Presented by: Dr. Johanna Lahti Senior Research Fellow Tampere University of Technology Co-authors: Kimmo Lahtinen (LUT*), Petri Johansson (TUT),

Supplementary Information

Supplementary Information Growth kinetics of white graphene (h-bn) on a planarised Ni foil surface Hyunjin Cho 1,4, Sungchan Park 1, Dong-Il Won 2, Sang Ook Kang 2, Seong-Soo Pyo 3, Dong-Ik Kim 3, Soo

AIMCAL Fall Technical Conference & 19th International Conference on Vacuum Web Coating

AIMCAL Fall Technical Conference & 19th International Conference on Vacuum Web Coating A.G. Talma, R. Schlatmann, J.W.G. Mahy Akzo Nobel Chemicals bv, P.O. Box 9300, 6800 SB Arnhem, The Netherlands. Phone

Comparison of Different Sputter Processes for ITO: Planar DC versus Planar AC

Comparison of Different Sputter Processes for ITO: Planar DC versus Planar AC P. Sauer, H.-G. Lotz, A. Hellmich, R. Kukla, J. Schröder Applied Films GmbH & Co. KG, Alzenau, Germany Key Words: ITO MF PET

Passive components : 5 years failure analysis feedback From all markets

2 nd SPCD 12-14 October 2016 Passive components : 5 years failure analysis feedback From all markets Eric ZAIA (Material Engineer) Béatrice MOREAU (Passive components & PCB dpt. Manager) SUMMARY 1 Introduction

Nucleation and growth of nanostructures and films. Seongshik (Sean) Oh

Nucleation and growth of nanostructures and films Seongshik (Sean) Oh Outline Introduction and Overview 1. Thermodynamics and Kinetics of thin film growth 2. Defects in films 3. Amorphous, Polycrystalline

Extending product lifetime with ALD moisture barrier

Whitepaper Extending product lifetime with ALD moisture barrier 01 executive summary Atomic Layer Deposition (ALD) is a thin film technology that enables new and highly competitive products. Typical applications

Fraunhofer ENAS Current results and future approaches in Wafer-level-packaging FRANK ROSCHER

Fraunhofer ENAS - Current results and future approaches in Wafer-level-packaging FRANK ROSCHER Fraunhofer ENAS Chemnitz System Packaging Page 1 System Packaging Outline: Wafer level packaging for MEMS

6.1 Summary. Summary and Scope for Further Study

Summary and scope for further study Summary and Scope for Further Study 6.1 Summary Detecting gases and determining their composition has constantly been on the increase in recent years. The demand for

Bringing Permeation Barrier Technology to Application. From Ultra-High Barrier Films to Functional Films for Flexible Electronics

Bringing Permeation Barrier Technology to Application From Ultra-High Barrier Films to Functional Films for Flexible Electronics Degradation of organic devices on plastic films Barrier layer stack 1 1

"ITO Film Trend for Touch Panel Applications"

AIMCAL Web Coating Conference 2011 October 23-26 Reno, Nevada USA 1 "ITO Film Trend for Touch Panel Applications" Teijin Chemicals Ltd. Haruhiko Itoh 2 Content 1. Structure and Features of TCF 2. Touch

Why does polycrystalline natural diamond turn black after annealing?

phys. stat. sol. (a) 201, No.11, 2486 2491 (2004) / DOI 10.1002/pssa.200405178 Why does polycrystalline natural diamond turn black after annealing? B. Willems *, 1, K. De Corte 2, and G. Van Tendeloo 1

PROCESS FLOW AN INSIGHT INTO CMOS FABRICATION PROCESS

Contents: VI Sem ECE 06EC63: Analog and Mixed Mode VLSI Design PROCESS FLOW AN INSIGHT INTO CMOS FABRICATION PROCESS 1. Introduction 2. CMOS Fabrication 3. Simplified View of Fabrication Process 3.1 Alternative

Supplementary Information

Supplementary Information 13.2% efficiency Si nanowire/pedot:pss hybrid solar cell using a transferimprinted Au mesh electrode Kwang-Tae Park 1 *, Han-Jung Kim 1 *, Min-Joon Park 2, Jun-Ho Jeong 1,3, Jihye

Inline Sputtering System for Heterojunction Cells

GENERIS PVD Inline Sputtering System for Heterojunction Cells GENERIS PVD Inline Sputter System for ITO and Ag Deposition on Heterojunction Solar Cells Sputtering Technology at a Glance has delivered far

High Transmittance Ti doped ITO Transparent Conducting Layer Applying to UV-LED. Y. H. Lin and C. Y. Liu

High Transmittance Ti doped ITO Transparent Conducting Layer Applying to UV-LED Y. H. Lin and C. Y. Liu Department of Chemical Engineering and Materials Engineering, National Central University, Jhongli,

Solid. Imperfection in solids. Examples of Imperfections #2. Examples of Imperfections #1. Solid

Solid Imperfection in solids By E-mail: Patama.V@chula.ac.th Solid State of materials Rigid Strong bonding ionic, van der aals, metal bonding normally has crystal structure Examples of Imperfections #

Amorphous and Polycrystalline Thin-Film Transistors

Part I Amorphous and Polycrystalline Thin-Film Transistors HYBRID AMORPHOUS AND POLYCRYSTALLINE SILICON DEVICES FOR LARGE-AREA ELECTRONICS P. Mei, J. B. Boyce, D. K. Fork, G. Anderson, J. Ho, J. Lu, Xerox

Chapter 3 Silicon Device Fabrication Technology

Chapter 3 Silicon Device Fabrication Technology Over 10 15 transistors (or 100,000 for every person in the world) are manufactured every year. VLSI (Very Large Scale Integration) ULSI (Ultra Large Scale

Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) 1

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because it may not be technically

FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS BUSINESS DIVISION MECHANICAL AND AUTOMOTIVE ENGINEERING

FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS BUSINESS DIVISION MECHANICAL AND AUTOMOTIVE ENGINEERING 1 MECHANICAL AND AUTOMOTIVE ENGINEERING The Mechanical and Automotive Engineering

Illuminating Innovations

Illuminating Innovations TM Silicone Solutions for LED Packaging Emir Debastiani Application Engineer Dow Corning Brazil Email: emir.debastiani@dowcorning.com Table of Contents Dow Corning Introduction

Optical Characterization of Epitaxial Semiconductor Layers

Günther Bauer Wolfgang Richter (Eds.) Optical Characterization of Epitaxial Semiconductor Layers With 271 Figures Springer Contents Contributors XV 1 Introduction 1 Günther Bauer, Wolfgang Richter 2 Analysis

Summary and Scope for further study

Chapter 6 Summary and Scope for further study 6.1 Summary of the present study Transparent electronics is an emerging science and technology field concentrated on fabricating invisible electronic circuits

Enhancement of Copper Wetting via Surfactant-Based Post-Treatment of Ultra-Thin Atomic Layer Deposited Tantalum Nitride Liners

Mat. Res. Soc. Symp. Proc. Vol. 766 2003 Materials Research Society E10.3.1 Enhancement of Copper Wetting via Surfactant-Based Post-Treatment of Ultra-Thin Atomic Layer Deposited Tantalum Nitride Liners

Nanostructured Engineered Materials With High Magneto-optic Performance For Integrated Photonics Applications

Edith Cowan University Research Online School of Engineering Publications 28 Nanostructured Engineered Materials With High Magneto-optic Performance For Integrated Photonics Applications Mikhail Vasiliev

Solar Film Introduction. Company Presentation 1

olar Film Introduction Company Presentation 1 Executive ummary Background pecialized in the production of organic solar films based on proprietary IP Founded in 2006 out of two leading universities HQ

Presented at the 28th European PV Solar Energy Conference and Exhibition, 30 Sept October 2013, Paris, France

A NOVEL APPROACH TO HIGH PERFORMANCE AND COST EFFECTIVE SURFACE CLEANING FOR HIGH EFFICIENCY SOLAR CELLS A. Moldovan 1A, M. Zimmer 1, J.Rentsch 1, B.Ferstl 2, S.Rajagopalan 2, S.Thate 2, J.Hoogboom 2,

Non-destructive metrology for IC fabrication

Non-destructive metrology for IC fabrication Planarisation Technology Workshop UCD, 17 Aug 2007. Patrick J. McNally Nanomaterials & Processing Laboratory School of EE, DCU 1 Co-Workers Lu Xu, Dr. Donnacha

MORPHOLOGICAL AND ELECTRICAL STUDIES OF Zn DOPED CdTe THIN FILM BY STACKED ELEMENTAL LAYER METHOD

Chalcogenide Letters Vol. 7, No. 10, October 2010, p. 581 586 MORPHOLOGICAL AND ELECTRICAL STUDIES OF Zn DOPED CdTe THIN FILM BY STACKED ELEMENTAL LAYER METHOD S. SHANMUGAN *, D. MUTHARASU Nano Optoelectronics

An advantage of thin-film silicon solar cells is that they can be deposited on glass substrates and flexible substrates.

ET3034TUx - 5.2.1 - Thin film silicon PV technology 1 Last week we have discussed the dominant PV technology in the current market, the PV technology based on c-si wafers. Now we will discuss a different

Supplementary Information. for

Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Supplementary Information for Nanoslitting Phase-separated Block Copolymers by Solvent Swelling

36A0 INSPECTION Stephan Falter, Baker Hughes, a GE company, Germany,

A 360 INSPECTION Stephan Falter, Baker Hughes, a GE company, Germany, details how innovations can enhance confidence in the operational integrity of seamless tube and pipe. S eamless tube and pipe is widely

Nanotechnology makes brighter LED s. Michael P.C. Watts

Nanotechnology makes brighter LED s Michael P.C. Watts www.impattern.com Outline Why are LED s such a big deal? Brightness; lumens per watt & lumens per dollar Applications How does nanotechnology help?

Roll-to-roll Technology for Transparent High Barrier Films

Roll-to-roll Technology for Transparent High Barrier Films Presented at the AIMCAL Fall Technical Conference, October 19-22, 2008, Myrtle Beach, SC, USA Nicolas Schiller, John Fahlteich, Matthias Fahland,

Surface Preparation Challenges in Crystalline Silicon Photovoltaic Manufacturing

Surface Preparation Challenges in Crystalline Silicon Photovoltaic Manufacturing Kristopher Davis 1,3, Andrew C. Rudack 2,3, Winston Schoenfeld 1,3 Hubert Seigneur 1,3, Joe Walters 1,3, Linda Wilson 2,3

Guénaël RIBETTE. General Director

Guénaël RIBETTE General Director I will explain you Different sketches in relation with current thermal applications in following Segments Semiconductor Fiber optic Automotive Aerospace & Defense Telecomunications

REQUEST FOR PROPOSAL Ballistic Film

REQUEST FOR PROPOSAL 2019 Ballistic Film Selected areas on all educational buildings (10 Elementary, 2 Middle school, 2 High School, 2 other) Bid Closing Date: December 20, 2018 Bid Closing Time: 1:00

UV15: For Fabrication of Polymer Optical Waveguides

CASE STUDY UV15: For Fabrication of Polymer Optical Waveguides Master Bond Inc. 154 Hobart Street, Hackensack, NJ 07601 USA Phone +1.201.343.8983 Fax +1.201.343.2132 main@masterbond.com CASE STUDY UV15:

CMP Applications and Issues Part 3

CMP Applications and Issues Part 3 By Christopher Henderson This is the third and final part in a series on Chemical Mechanical Polishing (CMP) applications and issues. An important aspect of CMP is end

respectively. A plot of the Raman shift position as a function of layer number in Figure S1(c)

Supplementary Information - Mapping of Shear and Layer-Breathing Raman modes in CVD-Grown Transition Metal Dichalcogenides: Layer Number, Stacking Orientation and Resonant Effects Maria O Brien 1,2, Niall

Silver Diffusion Bonding and Layer Transfer of Lithium Niobate to Silicon

Chapter 5 Silver Diffusion Bonding and Layer Transfer of Lithium Niobate to Silicon 5.1 Introduction In this chapter, we discuss a method of metallic bonding between two deposited silver layers. A diffusion

Application Note #124 VITA: Quantitative Nanoscale Characterization and Unambiguous Material Identification for Polymers

Local thermal analysis identifies polymer AFM image of polymer blend Application Note #124 VITA: Quantitative Nanoscale Characterization and Unambiguous Material Identification for Polymers VITA module

Heteroepitaxy of Monolayer MoS 2 and WS 2

Supporting Information Seed Crystal Homogeneity Controls Lateral and Vertical Heteroepitaxy of Monolayer MoS 2 and WS 2 Youngdong Yoo, Zachary P. Degregorio, James E. Johns* Department of Chemistry, University

Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions

Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions Xidong Duan, Chen Wang, Jonathan Shaw, Rui Cheng, Yu Chen, Honglai Li, Xueping Wu, Ying Tang, Qinling Zhang, Anlian Pan,

Nondestructive Testing

Nondestructive Testing Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Nondestructive inspections fundamentals Classification of nondestructive inspections Radiographic inspection Magnetic particle

Electroless CoWP Boosts Copper Reliability, Device Performance Bill Lee, Blue29, Sunnyvale, Calif. -- 7/1/2004 Semiconductor International

Fabrication of MoS 2 Thin Film Transistors via Novel Solution Processed Selective Area Deposition

Electronic Supplementary Material (ESI) for Journal of Materials Chemistry C. This journal is The Royal Society of Chemistry 2015 Supplementary Information Fabrication of MoS 2 Thin Film Transistors via

Nanosecond Laser Processing of Diamond Materials

Lasers in Manufacturing Conference 2015 Nanosecond Laser Processing of Diamond Materials Jan-Patrick Hermani a, *, Christian Brecher a, Michael Emonts a a Fraunhofer IPT, Steinbachstr. 17, 52074 Aachen,

Polycrystalline and microcrystalline silicon

6 Polycrystalline and microcrystalline silicon In this chapter, the material properties of hot-wire deposited microcrystalline silicon are presented. Compared to polycrystalline silicon, microcrystalline

Nanomend Acheivements

NANOMEND METROLOGY FOR ENHANCED NANO-SCALE DETECTION, CLEANING AND REPAIR Enhanced in-line detection, cleaning and repair of nano scale defects in thin films for flexible photovoltaic and food packaging

Effect of Doping Concentration on the Structural Properties of Zn: SnO 2

IOSR Journal of Applied Physics (IOSR-JAP) e-issn: 2278-4861.Volume 7, Issue 3 Ver. II (May. - Jun. 2015), PP 45-49 www.iosrjournals.org Effect of Doping Concentration on the Structural Properties of Zn:

III Fabrication of the samples

III Fabrication of the samples The fabrication of the samples for SPR measurement consists of three steps. It begins with glass substrates cleaning using ultrasonication, followed by the deposition of

VLSI Design and Simulation

VLSI Design and Simulation CMOS Processing Technology Topics CMOS Processing Technology Semiconductor Processing How do we make a transistor? Fabrication Process Wafer Processing Silicon single crystal

Future in your hands.

Nexterion Future in your hands. 2 SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials and

Spectral selectivity of doped zinc and aluminium oxide thin films prepared by spray pyrolysis for solar energy applications

Spectral selectivity of doped zinc and aluminium oxide thin films prepared by spray pyrolysis for solar energy applications P C Simpemba 1,2, K Chinyama 1, J Simfukwe 1 and N R Mlyuka 3 1 The Copperbelt

SOLAR ENERGY. Approximately 120,000 TW of solar energy strikes the earth s surface, capturing only a fraction could supply all of our energy needs.

SOLAR ENERGY Approximately 120,000 TW of solar energy strikes the earth s surface, capturing only a fraction could supply all of our energy needs. What is Photovoltaics? Photovoltaics is a high-technology

IMP EPD End Point Detector

IMP EPD End Point Detector An overview of the Hiden Analytical SIMS end point detector system for ion beam etch applications IMP-EPD Presentation Topics The topics covered in the presentation include:

AMORPHOUS SILICON DIOXIDE LAYER FOR HIGH EFFICIENCY CRYSTALLINE SOLAR CELLS

International Journal of Nanotechnology and Application (IJNA) ISSN(P): 2277-4777; ISSN(E): 2278-9391 Vol. 6, Issue 5, Dec 2016, 1-6 TJPRC Pvt. Ltd. AMORPHOUS SILICON DIOXIDE LAYER FOR HIGH EFFICIENCY

INA-X System for SNMS and SIMS

Customized Systems and Solutions Nanostructures and Thin Film Deposition Surface Analysis and Preparation Components Surface Science Application INA-X System for SNMS and SIMS Application Notes The quantitative

Silicone based sensors and actuators for medical diagnosis

Silicone based sensors and actuators for medical diagnosis Dr. Bernhard Brunner, Fraunhofer ISC, Würzburg Aachen - Dresden - Denkendorf International Textile Conference 11-30-2017 / 12-1-2017, Stuttgart

MODEL 1051 TEM Mill ION MILLING. Ion milling is used on physical science. specimens to reduce thickness to electron

MODEL 1051 TEM Mill A state-of-the-art ion milling and polishing system offering reliable, high performance specimen preparation. It is compact, precise, and consistently produces high-quality transmission

Supplementary Figure 1. Schematic for the growth of high-quality uniform

Supplementary Figure 1. Schematic for the growth of high-quality uniform monolayer WS 2 by ambient-pressure CVD. Supplementary Figure 2. Schematic structures of the initial state (IS) and the final state

OPTICAL IDENTIFICATION OF FEW-LAYER GRAPHENE OBTAINED BY FRICTION

OPTICAL IDENTIFICATION OF FEW-LAYER GRAPHENE OBTAINED BY FRICTION Manuel Mailian 1, Kamran ul Hasan 2, 3, Aram Mailian 4* 1 LTX-Credence Armenia, 2 Adonts str., 0014, Yerevan, Armenia. 2 Department of

GEBRUIKERS COMMISSIE MEETING

1 SIM: SoPPoM SBO3: PhyCIGS 21october 2013 GEBRUIKERS COMMISSIE MEETING SBO3 SUMMARY PRESENTED BY MARC MEURIS IMEC ENERGY IMEC KUL-MTM KUL-FYS U ANTWERP U HASSELT - IMOMEC U GENT OUTLINE Goals and activities

Non-destructive optical measurements of dissolved oxygen of filled BIB packages to optimize filling and packaging technology

Non-destructive optical measurements of dissolved oxygen of filled BIB packages to optimize filling and packaging technology Dr. Christian Huber PreSens Precision Sensing GmbH Content Basics - Who is PreSens?