Straight running slat-band chains made of steel and stainless steel

Size: px
Start display at page:

Download "Straight running slat-band chains made of steel and stainless steel"

Transcription

1 LEAD BY IDEAS

2 Straight running slat-band chains made of steel and stainless steel Type 812/815, dimensions, mass SPROCKET ISO N Plate S K 225 S K 263 S K 325 S K 400 S K 450 S K 600 S K 750 SSR K 125 SSR K 175 SSR K 325 SSC K 325 SSC K 350 SSC K 400 SSC K 450 SSC K 600 SSC K 750 C 13 S-1 C 16 S-1 C 18 S-1 C 24 S-1 C 30 S-1 C 13 S C 14 S C 16 S C 18 S C 24 S C 30 S Carbon Steel Heat-treated Special-alloy Stainless Steel Special-alloy Stainless Steel Ultimate Strength Newton ½ K L TT Q GC H E 57,2 66,2 101,6 32,0 44,5 88,9 101,6 Plate gap Radius min. 6,6 3,1 42, ,35 1, ,6 6,6 6,6 3,1 3,1 3, , ,8 9,8 9,8 6,35 6,35 6,35 2,8 80 6,6 3,1 42, ,35 1,8 150 SSR K 325 C 13 S ,6 3,1 42, ,35 2, ,6 SS K 325 SS K 350 SS K 400 SS K 450 SS K 600 SS K 750 SC K 750* SSC K 750* SC K 750* C 13 S-4 C 14 S-4 C 16 S-4 C 18 S-4 C 24 S-4 C 30 S-4 C 30 D-2 C 30 D-3 C 30 D-4 Austenitic Steel Chrome-Nickel 18/8 Carbon Steel Special-alloy Stainless Steel Chrome-Nickel Steel 18/ ,9 101,6 6,6 3,1 42, ,35 1, ,1 2,4 2,6 3,0 3,3 4,2 5,1 1,1 1,3 2,6 2,6 2,7 3,0 3,3 4,2 5,1 2,6 2,7 3,0 3,3 4,2 5,1 6,6 3,1 80,5 9,8 6,35 1, ,8 * These chains are with double hinge Standard length: 80 links 10 ft [3,048 m] Slat-band chains with 1 -pitch made of special stainless steel are available with chain N SSC 512 Straight running slat-band chains made of thermo plastic, dimensions, mass 820 Sprocket [also suitable for chains 812/815] K 325* K 400* K 450* K K K K K 750 Plate for type 820/831 LF D WR* HP PP AS LF HP 1 ½ 1 ½ K L TT Q GC E H 101,6 7,14 3,97 42,07 44,45 6,35 9,53 7,2 4,8 42,1 44,5 6,35 8,7 0,83 0,95 1,03 1,25 1,47 1,00 1,24 1,76 s for plastic chains LF = Acetal resin with slide additives D = Acetal resin WR = Polyamide HP = with lowest friction coefficient PP = Polypropylene AS = Anti-static Pin : stainless steel Standard length: 80 links 10 ft [3,048 m] All these chains are also available with plastic pins. Further information about the material * These chains will be also manufactured in WR material! characteristics you will find on page 4 2

3 Side-flexing slat-band chains made of stainless steel Type 8811 for highest demands Its flatness and surface quality with circumferential chamfer as well as its distortion-free welding make this chain especially suitable for pressure-less combiners. The higher demands placed on modern high-performance lines with regard to efficiency, safety and noise reduction led logically to the development of this new generation of side-flexing chains. Type 8811 with beveled guide shoes Available GC materials K L TT J Q E G H R min. Straight Curve K 325* 11,2 3,0 SSC resp. U 1 ½ K 450* 6,6 3, ,5 41,3 6,35 11,9 3,7 SS** K ,9 5,5 * These chains are also available made of heat-treated carbon steel. Standard length: 80 links 10 ft [3,048 m] Sprocket 8811 TAB - K 325* 8811 TAB - K 450* 8811 TAB - K 750 Available materials SSC resp. U SS** 1 ½ Type 8811 TAB with hold-down tabs K L TT J Q GC E G H R min. Straight Curve 3,3 6,6 3,15 56, ,5 6,35 12,7 16,3 3,8 5,5 Standard length: 80 links 10 ft [3,048 m] s for slat-band chains made of steel and stainless steel Abbreviation Characteristics S SSC resp. U SS Heat-treated carbon steel, this steel has highest mechanical strength. Stainless special-alloy steel with excellent mechanical properties and improved corrosion-resistance. Chains made of this material are preferred for application in the beverage industry. Austenitic Chrome-Nickel [18/8] steel ** The side-flexing slat-band chains made of this material are manufactured only in the elder execution! The dimensions are not according to the above picture! Type SSC 881 M for magnetic curves with straight guiding surface at the pin 881 M- K 325* 881 M- K 450* 881 M- K 750 Plate material SSC 1 ½ K GC Straight Curve 46 44,5 R min. 2,5 3,2 4,9 Suitable for all market-used magnetic curves Standard length: 80 links 10 ft [3,048 m] 3

4 Straight running slat-band chains made of thermo plastic [reinforced execution] 821 Sprocket K K K 1200 for type 821 LF D HP 1 ½, dimensions, mass K L TT Q GC** E H 254,0 304,8 7,94 4,76 136,7 139,7 6,35 9,53 ** GC = smallest wear strip distance recommended for single-strand conveyor Pin : stainless steel 2,50 2,95 3,25 Standard length: 80 links / 10 ft [3,048 m] Side -flexing slat-band chains made of thermo plastic Type 880, dimensions, mass s for type 880 and 880 TAB K L TT J Q GC Straight Curve E G H R min K K TAB - K 325* 880 TAB - K 450* LF D WR HP AS* 1 ½ 7,54 3,97 61,12 61,12 42,86 44,45 44,45 46,04 46,04 41,28 41,28 43,66 43,66 7,14 11,11 11,11 15,8 0,89 1,04 0,93 1,08 Pin : stainless steel With designation LF 879 these chains may be supplied with a plate thickness [TT] of 4,8 mm. The chain N LF 880 TAB may be manufactured with a radius of 200 mm, but then named LF 880 BO. All these chains are also available with plastic pins. * These chains will be also manufactured in AS-execution [antistatic material] s for slat-band chains made of plastic Abbreviation Characteristics Operating Temperature Color LF D WR HP [Acetal based resin with sliding additives] with low friction coefficient and high wear resistance [Acetal based resin] The mechanical properties are equal to those of the LF-material, but with a higher friction coefficient and a lower wear resistance. [Wear resistant material] To be used in abrasive environments [casting machined steel components, sand, glass, sugar, etc.]. This material offers a wear life 5-times longer than Acetal resin, but the friction coefficient is higher. This material offers the lowest available friction coefficient and is recommended especially for the beverage industry. -40 to +80 C in air Brown up to +65 C in water -40 to +80 C in air Grey up to +65 C in water -5 to +100 C in air Black -40 to +80 C in air up to +65 C in water PP [Polypropylene] A price-favorable material with good chemical resistance. +5 to +105 C in air up to +105 C in water AS [Antistatic material] Reduces the accumulation of electrostatic charges. Good electrical conductivity. Please, ask our consulting engineers for using this material. +60 C in air +50 C in water HP Dark Grey WHP White White Black 4

5 Side-flexing slat-band chains made of thermo plastic [reinforced execution] Type 882 smallest curve radius 882 TAB - K 325* K TAB - K 450* K TAB - K 750* K TAB - K 1000* 882 TAB - K 1200* LF/HP* 1 ½, dimensions, mass GC K L TT J Q Straight Curve 9,53 4,76 9,53 4,76 254,0 254,0 304,8 9,53 4,76 76,2 76,2 76,2 76,2 76,2 57,15 60,33 57,15 60,33 57,15 60,33 57,15 57,15 60,33 61,91 60,33 61,91 60,33 61,91 60,33 60,33 57,94 8,73 57,94 8,73 57,94 8,73 E G H R min. 16,67 16,67 16,67 16,67 16,67 Type 882 TAB 22,23 17,46 22,23 17,46 22,23 17,46 22,23 22,23 *These chains are also manufactured in HP-material. Pin : stainless steel Standard length: 80 links 10 ft [3,048 m] q 1,86 1,94 1,98 2,38 2,43 2,83 2,87 3,41 Straight running plate top chains matching sprocket Type 843 and 863 Plates made of plastic D K 138 D K 144 D K 200 D K 325 D 843 SS - K 138 D 843 SS - K 144 D 843 SS - K 200 D 843 SS - K 325 D K 325 D K 450 D K 600 D K 750 D 863 SS - K 325 D 863 SS - K 450 D 863 SS - K 600 D 863 SS - K 750 Basic Chain Plate K L TT Q GC E H Steel Stainless Steel mat. N 4310 Steel Stainless Steel mat. N 4310 Acetal or LF-Acetal Acetal or LF-Acetal Acetal or LF-Acetal Acetal or LF-Acetal ½ [12,7] ½ [12,7] ¾ [19,05] ¾ [19,05] 34,9 36,5 50,8 34,9 36,5 50,8 9,13 3,18 20,6 23,9 3,97 11,57 0,83 0,84 0,89 1,03 0,83 9,13 3,18 20,6 23,9 3,97 11,57 0,84 0,89 1,03 2,10 14,29 3,97 34,1 36,5 5,95 19,05 2,23 2,53 2,68 2,10 14,29 3,97 34,1 36,5 5,95 19,05 2,23 2,53 2,68 Standard length: 80 links 10 ft [3,048 m] 5

6 Side-flexing plate top chains Plates made of steel and stainless steel matching sprocket Type 1873/ K K K K A - K A - K A - K A - K SS - K SS - K SS - K SS - K 750 GC K L TT J Q Basic Chain Plate straight curve Steel Steel ¾ [19,05] Steel Stainless Steel mat. N 4310 Stainless Steel mat. N 4310 Stainless Steel mat. N 4310 ¾ [19,05] ¾ [19,05] E G H 14,29 3,18 57,15 31,75 34,1 34,9 5,08 20,6 23,8 14,29 3,18 57,15 31,75 34,1 34,9 5,08 20,6 23,8 14,29 3,18 57,15 31,75 34,1 34,9 5,08 20,6 23,8 R min ,20 4,80 5,70 6,40 4,20 4,80 5,70 6,40 4,20 4,80 5,70 6,40 Standard length: 80 links 10 ft [3,048 m] Plates made of plastic matching sprocket Type 1873/ K K K 600 Steel K K SS - K SS - K 450 Stainless Steel 1873 SS - K 600 mat. N SS - K SS - K 1000 GC K L TT J Q Basic Chain Plate straight curve Acetal Acetal ¾ [19,05] ¾ [19,05] E G H 14,29 3,97 57,15 31,75 33,3 34,9 5,08 20,6 25,4 14,29 3,18 57,15 31,75 33,3 34,9 5,08 20,6 25,4 Slat-band and plate top chains with rubber attachments R min ,1 2,3 2,4 2,6 2,8 2,1 2,3 2,4 2,6 2,8 Standard length: 80 links 10 ft [3,048 m] For incline conveying the slat-band and plate top chains will be equipped with rubber attachments. The plastic chains will be manufactured with sprayed-on rubbers or rubber inserts molded into the plates. The steel or stainless steel chains are equipped with a vulcanized rubber coating. Through the use of the guide shoe concept, goods may be conveyed directly from horizontal to the inclination. By means of various execution of these attachments the chain may adapted to the respective conveying requirement. Should you have additional questions, consult our engineers! 6

7 Low back-line pressure chains made of plastic for wide surface products LBP 883 TAB side-flexing LBP 882 TAB side-flexing LBP 821 straight running chain width slat width clear width of the guiding 140 clear width straight 60,3 curve 58 Using the low back-line pressure chains, makes possible reducing the accumulation pressure considerably in opposite to an ordinary plastic slat-band chain because the sliding friction of the slat-band chain changes into a rolling friction of the back-line pressure chain. straight curve clear width LBP K 750 LBP K 1000 LBP K 1200 LBP 882 TAB - K 375 LBP 882 TAB - K 450 LBP 882 TAB - K 750 LF Acetal with pins of stainless steel 1 ½ Chain width 254,0 304,8 95,2 The chain is similar in construction and pitch to the plastic chain 821 and 882, so the sprockets type 821 and type 882 may be used. Radius min Radius Curve Roller-Ø Axe distance of the rollers 11 12, ,7 11,0 12,0 6,10 6,85 8,04 3,7 3,9 5,6 Side-flexing Multiflex chains made of plastic Type 1700 Type 1701 TAB K R min. GC Width Link Pivot Pin Zinc plated Steel 1,27 Acetal resin Stainless Steel 1,27 LF Acetal resin with self Zinc plated Steel 1,27 LF lubricating additive Stainless Steel 1,27 LF 1701 TAB* Straight 59,5 Acetal resin with self Polyamide Curve 55,6 lubricating additive Stainless Steel 1,27 S 1700** Acetal resin with steel plated surface Zinc plated Steel 1,9 Y 1700*** Acetal resin Stainless Steel 1,26 * The chain LF 1701 TAB is equipped with down holder tabs for positive guide [e.g. as LF 880 TAB]. ** The Multiflex chain S 1700 is equipped with a steel plated surface, so accumulation of sharp-edged products is possible, too. *** Suitable for horizontal conveying only! 7

8 Modular Plastic Belts Modular plastic belts are especially applied for extensive transport of mass products. Their manifold execution variants open a large scope of application. The modular design allows choosing among a number of width dimensions and thus a flexible adaptation to the individual requirements. Because of the great standing surface these chains are especially appropriate for the transport of instable goods. The simple structure and the low weight affect low operation and maintenance expenses. The product group of the plastic mat chains consists of three series that differ in their constructed execution. Chain materials: Abbreviation LF D HP WHP HT WHT YSM WLT Characteristics (Acetal based resin with sliding additives) with low friction coefficient and high wear resistance (Acetal based resin) The mechanical properties are equal to those of the LF-material, but with a higher friction coefficient and a lower wear resistance. This material offers the lowest available friction coefficient and is recommended especially for the beverage industry. (Polypropylene for increased temperatures) A price favorable material with good chemical resistance. Suitable for temperatures up to +105 C The YSM material is appropriate for operation temperatures up to +130 C. (Polyethylene) This material is especially suitable for application at low temperatures. High chemical resistance. High strength and tenacity at low temperatures. Operating Temperature -40 to +80 C in air up to +65 C in water -40 to +80 C in air up to +65 C in water -40 to +80 C in air up to +65 C in water +5 to +105 C in air up to +105 C in water +5 to +130 C in air up to +130 C in water -70 to +25 C dry and humid On request these chains can be manufactured out of anti-static (AS) and out of UV-resistant (UV) material. Color Brown Grey HP Dark Grey WHP White HT Beige WHT White Yellow White Closed Surface : LF HT HP WHP LF HT : 19,05 25,4 38,1 Open surface: 5 % 3 % 2 % Nominal strength [N/m]: LF 7300 HT LF 8750 HT Accessories: Transfer Plates Transfer Plates Flights Side Guards Transfer Plates Certification: FDA FDA FDA Perforated Surface : LF HT LF WHT LF WHP : 19,05 25,4 25,4 Open surface: 16 % 44 % 8 % Nominal strength [N/m]: LF 7300 HT 10 LF 7300 WHT Accessories: Transfer Plates Flights Transfer Plates Transfer Plates Certification: FDA FDA USDA FDA ipped Surface : LF HT LF HT LF HT : 38,1 38,1 38,1 Open surface: 23 % 48 % 44 % Nominal strength [N/m]: LF 8750 HT LF 7300 HT LF HT Accessories: Transfer Combs Transfer Combs Transfer Combs Certification: FDA FDA FDA 8

9 Standard chain width: Series Nominal Chain Width 2100 / 4705 / 4706 / ,2-4495,8 mm 4802 / ,0 mm 4803 / ,2-3657,6 mm 4809 / 5996 / ,6 mm 5935 / ,2-4495,8 mm 6390 / 6391 / ,0-3000,0 mm 7705 / ,2-3048,0 mm On demand we may supply other widths as well! The new transfer system has been developed for 90 transfers of products without fixed transfer plates. WHT YSM WHT YSM % 26 % (6391) 48 % (6392) Open surface Nominal strength [N/m] Flights Side Guards Flights (6391) Side Guards Accessories FDA (WHT) FDA (WHT) Certification Closed Surface Special attachments at the chain 7705 and 7706 replace the transfer plates. The individual product is moved over the transfer zone without being pushed or damaged. The transfer system guarantees a trouble-free continuous product flow. LF HT LF HT LF WHT WLT LF WHT WLT 38,1 38,1 38,9 57,15 22 % 33 % 31 % 21 % LF 8750 HT LF 7300 HT LF WHT LF WHT 8750 WLT WLT Flights Side Guards Flights Side Guards Flights Side Guards Flights Side Guards Transfer Plates Transfer Plates Transfer Plates FDA FDA FDA USDA FDA USDA Perforated Surface FDA: suitable for direct contact with food USDA: suitable for direct contact with meat and poultry LF HT HT 57,15 57,15 34 % 22 % Open surface LF HT Nominal strength [N/m] Transfer Combs Transfer Combs Accessories FDA FDA Certification Ripped Surface We supply matching to the chains: Transfer Plates Transfer Combs Flights, Side Guards Sprockets Data sheets will be send on demand. 9

10 Sprockets for Multiflex chains Type 1700 Teeth Tooth width Bore Hub length Hub ,8 11, one-side 70 Grey cast iron / Steel ,8 11,1 25/30 PN 42 sym. 49,5 Plastic with brass bush ,8 11,1 25/30 42 sym. 49,5 Plastic ,1 11, one-side 70 Steel Plastic drive sprocket with brass bush Plastic idler sprocket Idler discs for Multiflex chains M8x25 DIN 6912 Ball bearing ( RS) Plastic idler disc Special executions and aluminium idler discs may be supplied, too. Idler disc 1700 made of grey cast iron On demand we also supply the idler discs completely with flange and bearing. Please, ask for data sheets! Split plastic sprockets for slat-band chains Idler wheels Sprockets Sprockets, color: natural white molded, one-part, made of selflubricating plastic moulded, two-part made of full plastic material, one-part Ecological favorable design made of full plastic material, one-part made of full plastic material, two-part made of full plastic material, two-part made of full plastic material, two-part made of full plastic material, two-part Execution variants of sprockets and idler wheels made of thermoplastic one-part and two-part GRONEMEYER supplies various executions of sprockets and idler wheels for the most different applications. Molded execution: price favorable reduced noise level, quiet operation self-lubricating (idler wheels) material: glass-fiber reinforced polyamide, all steel parts stainless standard color: black Made of full-plastic (turned and milled): exceedingly robust especially wear resistant reduced noise level, quiet operation material: cast polyamide, all steel parts stainless standard color: black Use the advantages of the two-part execution: no disassembly of the drive shaft necessary quick and easy assembly and disassembly Ecological favorable execution (color natural white) The sprockets and the idler wheels made of plastic have smooth contours and surfaces. Thus these sprockets and wheels are particularly easy and properly to clean and, if necessary, also to disinfect. Through using of natural cast polyamide (without additives), worn sprockets and wheel may be recycled without any problems. All sprockets may be supplied with side guards (guide rings) The GRONEMEYER sprockets and the idler wheels are manufactured for slat-band chains according DIN 8153 and ISO 4348; therefore they match to all slat-band chains of every manufacturer. The special shape of teeth by GRONEMEYER compensates for natural chain lengthening after prolonged use. The high quality standard and routine production controls guarantee an equivalent high quality, which means a trouble-free, long-lasting operation of your conveyors. Standard sprockets will be supplied instantly from stock. 10

11 Sprockets for slat-band and plate top chains Type 815 Type 820 Type 821 Type 881 for slat-band chains for plastic for double-hinged for side-flexing made of steel or plastic slat-band chains slat-band chains made slat-band chains of steel or plastic made of stainless steel Actual teeth Effective teeth Ø d Outside Ø d Plain bore B Type 815/820 Type 821 Type 881 Tooth Hub Tooth Hub Tooth Hub width length width length width length 19 9,5 117,3 104, ,9 42, ,5 41, ,5 129,2 116, ,9 42, ,5 41, ,5 141,2 128, ,9 42, ,5 41, ,5 153,2 140, ,9 42, ,5 41, ,5 165,2 152, ,9 42, ,5 41, ,5 177,2 164, ,9 42, ,5 41, ,5 189,2 176, ,9 42, ,5 41,3 Loose side guards for slat-band chain sprockets are also available short-termed and price-favorable! We also manufacture sprockets with other dimensions, of other materials as well as according drawings. grey cast iron / plastic *) Type Type 880 Type /863/864/866/1873/1874/2873/3873 for side-flexing for side-flexing plastic slat-band for straight running and plastic slat-band chains chains (reinforced execution) side-flexing plate top chains Sprockets for side-flexing plastic slat-band chains Outside Ø d Tooth width Plain Hub length Actual Effective Ø bore teeth teeth d Type Type Type Type Type Type B ,4 95,9 92, ,3 107,8 104, Grey cast iron / ,2 119,7 115, Plastic ,2 131,7 127, ,2 167,8 164, *) The sprockets for plate top chains are manufactured upon your demand. All sprockets and idler wheels may be manufactured in one- or two-part execution. On demand in steel execution, too! Idler wheels, made of plastic made of self-lubricating plastic made of full-plastic material made of full-plastic material in turned execution, one-part in turned execution, two-part Respect. teeth Idler wheels, made of self-lubricating plastic Outside-Ø Total width Available for shaft-ø 11 Respect. teeth Idler wheels in turned execution Outside-Ø Total width Plain bore ,5 60,5 25, 30, 35, ,5 60,5 25, 30, 35, ,2 60,5 25, 30, 35, ,7 60,5 25, 30, 35, Other sizes and executions are also available short-termed.

12 Corner tracks for slat-band chains made of plastic material or Execution I for bevelled positive guide Execution II for guide with down holders (TAB-execution) Execution Dimension in mm R A B C D K K 325 I , K K 450 I , K TAB - K II 880 TAB - K TAB - K TAB - K 450 II TAB - K TAB - K TAB - K II TAB - K TAB - K TAB K TAB K II 1874 TAB K TAB K TAB K TAB K TAB K 600 II TAB K TAB K On demand the wear strips may be supplied in bored execution. Special dimensions upon your demand may be manufactured, too. The matching straight wear strips are available in each dimension. Straight tracks made of plastic material Flat profile FP L-shaped profile LP Z-shaped profile ZP Bulb profile WP Any other profile and thicker tracks are available by short term. Order N B H b h FP FP FP FP LP ZP WP

13 Compact corner tracks made of plastic for slat-band chains Guide with beveled side bars KS T-Guide KT The compact corner tracks may be also TAB-Guide = KT Guide with beveled side bars = KS supplied with inserted magnets intended as magnetic corner. The compact corners are available for single or multiple application as required. Order N KS KS KS KT KT KT Suitable for chain type D 880-K325, LF 880-K325, SS 881-K325, SSC 881-K325 D 880-K450, LF 880-K450, SS 881-K450, SSC 881-K450 SS 881-K750 SSC 881-K750 LF 880 TAB-K325, SS 881 TAB-K325 SSC 881 TAB-K325 LF 880 TAB-K450 SS 881 TAB-K450 SSC 881 TAB-K450 SS 881 TAB-K750 SSC 881 TAB-K750 Width Guide Width Width Radius a 1 b 1 b 2 h 1 h 2 h 3 h 4 r 1 e ±0, , KS LF 882-K , KS LF 882-K KS LF 882-K LF 882 TAB-K450 KT LBP 883 TAB-K450 LF 882 TAB-K750 KT LBP 883 TAB-K KT LF 882 TAB-K KT LF 882 TAB-K KT LBP 882 TAB-K375 LBP 883 TAB-K We also supply individual corner tracks for all side-flexing slat-band and plate top chains. s: : Ultra high molecular polyethylene (UHMWPE) as standard On request the corner tracks may be supplied with : Cast polyamide with MoS 2 additive (only on demand) threaded lateral assembly bushes and bore holes. 13

14 Guide rails and brackets 1 Bracket Type 8K 6 Support for round steel 12 2 Bracket Type 8M 7 Plastic profile 50 x 15 3 C-profile with plastic profile 8 Plastic profile 60 x 14 4 Pin for pos. 3 9 Support for C-profile double 5 C-profile with flat plastic profile 10 Support for round steel double Roller guides 2-row 4-row The roller guides are supplyable in lengths of 1000 mm, 2000 mm and 3000 mm. 6-row 14 s: Rollers made of Acetal resin Side strips made of Polyamide Casing, bolt and screws made of stainless steel

15 Support bases made of plastic Type 10 Tripod Type 10A Bipod Type 10B Double Bipod All steel parts of stainless material. Please, request for more data sheets about special executions! 15

16 Conveying Systems with slat-band and plate top chains Roadway bridge with integrated blow-out section Hygienic System Double-strand execution Aluminium System CONVEYING SYSTEMS Gronemeyer Maschinenfabrik GmbH & Co. P.O. Box D Höxter Germany Rohrweg 31 D Höxter Germany Phone Fax We produce complete conveying systems for the beverage-, food-, dairy-, cosmetic-, pharmacy-, paint and lacquer industry. Moreover conveyors are very successfully used connecting metal processing machines. All systems can be supplied completely with control systems and the required additional equipments. Please, request for our special catalogues! Errors, change of dimensions and of technical executions excepted! 16

Series 878 TAB TAB TAB - 880M 879M TAB - 882M. Sideflexing plastic chains

Series 878 TAB TAB TAB - 880M 879M TAB - 882M. Sideflexing plastic chains Series 878 TAB - 879-879 TAB - 880-880 TAB - 880M 879M - 882-882 TAB - 882M Sideflexing plastic chains 879 880 SIDEFLEXI CHAINS 16 42.9 8 Ø 7.14 38.1 38.1 7.55 SIDEFLEXI CHAINS Series 879 SIDEFLEXI CHAINS

More information

Rexnord 882 TableTop Chain

Rexnord 882 TableTop Chain 882 Drawing 2.44 in (62.0 mm) 0.19 in (4.8 mm) Rexnord 882 TableTop Min. Side-flex Overall 2.41 in (61.2 mm) Photo shows 882 TableTop molded in Low Friction (LF) material. Information Min. Side-flex Approximate

More information

Rexnord 1775-series ZeroGap tm chain

Rexnord 1775-series ZeroGap tm chain Rexnord 1775-series ZeroGap tm chain Rev Jan-2010 New ZeroGap tm Chain Rexnord 1775-series This new chain is ideal to Convey unstable and delicate containers like tall laminated paper bricks Sideflexing

More information

Rexnord 1503 MatTop Chain with Low Backline Pressure (LBP) Rollers

Rexnord 1503 MatTop Chain with Low Backline Pressure (LBP) Rollers LBP 1503 Photo shows 1503 MatTop with Low Backline Pressure Rollers molded in High Performance (HP ) material and yellow acetal rollers. Information Capacity per ft of width per m of width 0% - 100% 4

More information

N.B.: Upon request, all our chains can be produced with other types of stainless steel. Minimum temperatures o

N.B.: Upon request, all our chains can be produced with other types of stainless steel. Minimum temperatures o 11 Materials The Magris chains are produced with high quality steel/stainless steel in order to satisfy the growing needs of technological progress on the conveying lines. SLATS Materials Hard Inox Special

More information

Chains and Modular Belts

Chains and Modular Belts Chains and Modular Belts MATERIALS Steel FliteTop Chains S SS-4 Flight Material Through hardened carbon steel, surface and core hardness of 43HRC. Excellent strength and wear resistance. Dry running application.

More information

GROUP. special. Mechanical Transmissions on Demand. ingranaggi

GROUP. special. Mechanical Transmissions on Demand. ingranaggi Mechanical Transmissions on Demand GROUP special ingranaggi A solid and flexible company GROUP special ingranaggi MECHANICAL TRANSMISSIONS ON DEMAND Since 1999 we are the recognised leaders in the manufacture

More information

URETHANE TIMING BELT CATALOG

URETHANE TIMING BELT CATALOG URETHANE TIMING BELT CATALOG # Dura-Tech urethane timing belts from Sparks are designed for linear motion, conveying and power transmission applications. The combination of a wear resistant polyurethane

More information

Services Media No HabaCHAIN Engineering Guide. Habasit Solutions in motion

Services Media No HabaCHAIN Engineering Guide. Habasit Solutions in motion Services Media No. 6017 HabaCHAIN Engineering Guide Habasit Solutions in motion 2 This disclaimer is made by and on behalf of Habasit and its affiliated companies, directors, employees, agents and contractors

More information

Rexnord 1701 TableTop Chain

Rexnord 1701 TableTop Chain 1701 DIRECTION OF TRVE Drawing (Straight) 2.19 in (55.6 mm) 0.18 in (4.5 mm) (Curve) 2.34 in (59.4 mm) Rexnord 1701 TableTop Min. Side-flex Photo shows 1701 TableTop molded in ow Friction (F) material.

More information

Key Principles in Evaluating Chains for Packaging Applications

Key Principles in Evaluating Chains for Packaging Applications www.nerconconveyors.com Evaluating Packaging Conveyor Chain Key Principles in Evaluating Chains for Packaging Applications Discover the criteria that affects packaging chain selection: environment, product,

More information

the high capacity conveyor for improved unit flow

the high capacity conveyor for improved unit flow the high capacity conveyor for improved unit flow The heavy duty conveyor, designed for high capacity transport both vertically and horizontally Jonge Poerink Conveyors Modulary design fits easily into

More information

Antistatic Compounds HI-TEMP MATERIAL ( C ) ( C ) 7.47 ( C ) C

Antistatic Compounds HI-TEMP MATERIAL ( C ) ( C ) 7.47 ( C ) C Conical side guides The conical guide rail incorporates two outstanding s: stainless steel and. The stainless steel sheath provides rigid streamlined support for heavy loads at any speed, plus a solid

More information

METAL TABLETOP CHAINS

METAL TABLETOP CHAINS In 1938 Rexnord introduced the worlds first metal TableTop chain with integrated top plate and eyes. Nowadays the Rexnord and MCC product lines of steel slatband chains offer many materials, types and

More information

Vertical Offset Conveyors

Vertical Offset Conveyors VO-Series VO-SeriesBrochure_modified:VO-SeriesBrochure_modified.qxd 2/5/2009 11:20 AM Page 21 VO-Series Vertical Offset Conveyors your Material Handling Specialist VO-SeriesBrochure_modified:VO-SeriesBrochure_modified.qxd

More information

plastics for longer life

plastics for longer life iros...... lubrication-free and cost-effective... New online service life calculator. Service life now longer by up to a factor of 10 thanks to continuous further development www.igus.eu/xiroslife plastics

More information

Table of Contents. I. Introduction II. How To Use This Catalog Drives Idle End Conveyor Beams...

Table of Contents. I. Introduction II. How To Use This Catalog Drives Idle End Conveyor Beams... Table of Contents I. Introduction.................................................. 1 II. How To Use This Catalog........................................ 2 1.0 Drives......................................................

More information

B. Polyethylene samples shall be submitted for Owner approval of color and quality.

B. Polyethylene samples shall be submitted for Owner approval of color and quality. Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and

More information

thermoplastic straight running chains

thermoplastic straight running chains thermoplastic straight running chains WITH UE INSETS - SINGLE HINGE - HFL 820 SEIES TAVEL HFL 820 - HIGH FITION LINK Pins in special chrome-nickel stainless, work hardened for high resistance. PODUT ODE

More information

... self-lubricating and cost-effective...

... self-lubricating and cost-effective... xiros...... self-lubricating and cost-effective... $ $ New online service life calculator. Increased service life as a result of continuous development. www.igus.com/xiroslife plastics for longer life

More information

LUBRICANTS AND SURFACE TREATMENTS

LUBRICANTS AND SURFACE TREATMENTS LUBRICANTS AND SURFACE TREATMENTS GREASES ASSEMBLY PASTES OILS SURFACE TREATMENTS LOCTITE LUBRICANTS THE ULTIMATE ANSWER TO YOUR LUBRICATION PROBLEMS LUBRICANTS AND SURFACE TREATMENTS CONTENTS INTRODUCTION

More information

FOOD/SERIES JP FD SERIES THE COMPACT CONVEYOR FOR THE FOOD-PROCESSING INDUSTRY

FOOD/SERIES JP FD SERIES THE COMPACT CONVEYOR FOR THE FOOD-PROCESSING INDUSTRY FOOD/SERIES JP FD SERIES THE COMPACT CONVEYOR FOR THE FOOD-PROCESSING INDUSTRY EN JP FD SERIES JPFD SERIES DESIGNED FOR FOOD-PROCESSING APPLICATIONS THE JP FD SERIES IS DESIGNED FOR FOOD-PROCESSING APPLICATIONS.

More information

ID-Series Incline/Decline Conveyors

ID-Series Incline/Decline Conveyors ID-Series Incline/Decline Conveyors your Material Handling Specialist ID-SeriesBrochure_modified:ID Series Brochure.qxd 2/5/2009 11:27 AM Page 2 S pa n T ec h Yo u r Ma t e ri a l H a nd li n g S pe c

More information

CDLR Catalog. Lathrup Industries, Inc W. Nine Mile Rd. Novi, MI Phone: (248) Fax: (248)

CDLR Catalog. Lathrup Industries, Inc W. Nine Mile Rd. Novi, MI Phone: (248) Fax: (248) CDLR Catalog Lathrup Industries, Inc. 42300 W. Nine Mile Rd. Novi, MI 48375 Phone: (248) 349-1009 Fax: (248) 349-1062 1 Table of Contents Standard Specifications pg. 2 CDLR Dimentions Chart pg. 3 CDLR

More information

EASY CONVEYORS OVERVIEW

EASY CONVEYORS OVERVIEW EASY CONVEYORS OVERVIEW TABLE TOP CONVEYOR SYSTEMS MAT TOP CONVEYOR SYSTEMS CONVEYOR COMPONENTS BELT CONVEYORS SYSTEMS ROLLER CONVEYOR SYSTEMS www.autoline.net.nz www.easy-conveyors.com Easy Conveyors

More information

The right chain! Extreme Performance from Rexnord. RexCarbon. MODULE_03/GB/2014/12 // No liability accepted for misprints or errors!

The right chain! Extreme Performance from Rexnord. RexCarbon. MODULE_03/GB/2014/12 // No liability accepted for misprints or errors! Extreme Performance from Rexnord RexCarbon RexCarbon Extreme Performance from Rexnord. Maintenance-free & extremely long service life through high-tech carbon sliding sleeves Inner Fatigue resistant Roller

More information

1005 XLBP Series MatTop Chain Design Manual. Rexnord 1005 XLBP Series MatTop Chain

1005 XLBP Series MatTop Chain Design Manual. Rexnord 1005 XLBP Series MatTop Chain 1005 XLBP Series MatTop Chain Design Manual Rexnord 1005 XLBP Series MatTop Chain Contents Safety Considerations... 2 Introduction... 3 Chain Selection... 4 Wearstrips... 6 Drive and Idler... 7 Nose-over

More information

TRIVAR Extruded UHDPE Wearstrips

TRIVAR Extruded UHDPE Wearstrips TRIVAR UHDPE Wearstrips BELT BELT TECHNICAL TECHNICAL DATA DATA SHEET SHEET h Tel. +27 (0) 21 557 0129 - Fax +27 (0) 21 557 27 TRIVAR UHDPE Wearstrips Belting Edge(Pty) Ltd is well prepared to meet the

More information

Antistatic Compounds HI-TEMP MATERIAL ( C ) ( C ) 7.47 ( C ) C

Antistatic Compounds HI-TEMP MATERIAL ( C ) ( C ) 7.47 ( C ) C Conical side guides The conical guide rail incorporates two outstanding materials: stainless steel and UHMW. The stainless steel sheath provides rigid streamlined support for heavy loads at any speed,

More information

1071 Cast Steel Globe Steam Stop Valve (Flanged)

1071 Cast Steel Globe Steam Stop Valve (Flanged) 1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working

More information

Terrain HDPE. Product Guide

Terrain HDPE. Product Guide TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other

More information

KESTAMID. Cast Polyamide. An engineering plastic replacing metals. New technology, Advanced Properties

KESTAMID. Cast Polyamide. An engineering plastic replacing metals. New technology, Advanced Properties An engineering plastic replacing metals New technology, Advanced Properties KESTAMID Cast Polyamide Kestamid is a registered trademark of Polikim A.S. General Properties is a type of polyamide with outstanding

More information

35, rue des Bas-Trévois CS Troyes Cedex - France Tél : +33 (0) Fax : +33 (0) web :

35, rue des Bas-Trévois CS Troyes Cedex - France Tél : +33 (0) Fax : +33 (0) web : STEEL INDUSTRY 35, rue des Bas-Trévois CS 90104-10003 Troyes Cedex - France Tél : +33 (0)3 25 76 29 50 - Fax : +33 (0)3 25 80 31 62 web : www.sedis.com - e-mail : https://sedis.com/contact Finland Sweden

More information

MATERIALS [POLYETHYLENE] STANDARD POLYETHYLENE (PE) POLYPROPYLENE (PPE)

MATERIALS [POLYETHYLENE] STANDARD POLYETHYLENE (PE) POLYPROPYLENE (PPE) [POLYPROPYLENE] [POLYETHYLENE] STANDARD POLYPROPYLENE (PP) ELECTRICALLY CONDUCTIVE STANDARD POLYETHYLENE (PE) ELECTRICALLY CONDUCTIVE POLYPROPYLENE (PPE) POLYETHYLENE (PEE) Temperature range +1 ºC to +104

More information

Cement Industry CHAINS and SPROCKETS

Cement Industry CHAINS and SPROCKETS Cement Industry CHAINS and SPROCKETS HEAVY DUTY CEMENT ELEVATOR CHAIN ALLIED-LOCKE Heavy Duty SS Class Steel Bushed Chains are designed and constructed to withstand the rigorous conditions encountered

More information

I. Selection Procedure for DOUBLE PLUS, Outboard Roller and Top Roller Chain

I. Selection Procedure for DOUBLE PLUS, Outboard Roller and Top Roller Chain I. Selection Procedure for DOUBLE PLUS, Outboard Roller and Top Roller 1) Confirmation of operating conditions for free flow conveyor The following information is needed in order to select an appropriate

More information

The right chain! Extreme Performance from Rexnord. RexAthletic. MODULE_03/GB/2014/12 // No liability accepted for misprints or errors!

The right chain! Extreme Performance from Rexnord. RexAthletic. MODULE_03/GB/2014/12 // No liability accepted for misprints or errors! Extreme Performance from Rexnord RexAthletic RexAthletic The right chain! Long maintenance & lubrication intervals, long service life with special coating of pins & bushes for outstanding tribological

More information

Over / Under Conveyor

Over / Under Conveyor Compact, reliable and economic solutions for Transferring Accumulating Positioning Infeed and exit conveyors The compact and modular conveying system for transferring and accumulating parts with or without

More information

Polyurethane belts for conveying applications

Polyurethane belts for conveying applications Polyurethane belts for conveying applications Polyurethane belts for conveying applications The unique chemical and mechanical characteristics of ELATECH belts together with the possibility of a wide variety

More information

DRUM MOTOR 138LS 138.5Ø 0.10kW kW, with steel helical gearbox

DRUM MOTOR 138LS 138.5Ø 0.10kW kW, with steel helical gearbox 8 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW - 1.00kW, with steel helical gearbox Product description The drum motor 18LS is a very fl exible component thanks to the wide range of powers and speeds. Characteristics

More information

uni Material Selection

uni Material Selection 7 Material grades Temperature C Temperature F Load/ permissible load index FDA POM - Polyoxymethylen (POM-D/DI/LF/SLF/L/S/SX/L) -40 to +90-40 to +194 POM-D - Polyoxymethylen -40 to +90-40 to +194 POM-DAS/LAS

More information

Fundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p.

Fundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p. Fundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p. 5 Ecological Considerations p. 9 Societal Considerations p. 11 Overall

More information

Engineering guidelines alpine conveyors

Engineering guidelines alpine conveyors Engineering guidelines alpine conveyors What is an alpine conveyor INTRO EG-C EG-W EG-A EG-S APPL In-line or by-pass If the alpine is used as an accumulator there are two ways of using the alpine: The

More information

BS&k Company. Spring & k. Conroll produces accumulating conveyors with low and zero backpressure MANUFACTURERS REPRESENTATIVE

BS&k Company. Spring & k. Conroll produces accumulating conveyors with low and zero backpressure MANUFACTURERS REPRESENTATIVE B S & k BS&k Company MANUFACTURERS REPRESENTATIVE In motion for you... Spring 2012 Volume 12, Issue 2 Conroll produces accumulating conveyors with low and zero backpressure Inside this issue: POBCO brings

More information

Longer Wearlife Parts For Asphalt Plants

Longer Wearlife Parts For Asphalt Plants Longer Wearlife Parts For Asphalt Plants Still proudly made in the USA Kenco Engineering, Inc. Roseville, CA 800-363-9859 www.kencoengineering.com helps keep your plant working at day one productivity

More information

Conveyor Equipment

Conveyor Equipment 1800 750 900 Expanding Skate Conveyors Self tracking flexible expanding conveyor which expands from 1100mm to 4000mm and can be joined to make 1 continuous conveyor system Excellent for truck and container

More information

Product Catalog. Designers and manufacturers of safe, simple modular conveyors SAFE SIMPLE SOLUTIONS

Product Catalog. Designers and manufacturers of safe, simple modular conveyors SAFE SIMPLE SOLUTIONS Product Catalog Designers and manufacturers of safe, simple modular conveyors SAFE SIMPLE SOLUTIONS Revision 071514 Introduction Can t find a conveyor? Finding a conveyor to meet your application needs

More information

City of Minot Auditorium Non-Upholstered Arena Seating Specifications

City of Minot Auditorium Non-Upholstered Arena Seating Specifications City of Minot Auditorium Non-Upholstered Arena Seating Specifications **ALL BIDDERS MUST INCLUDE A DETAILED DRAWING FOR UPPER SEATING AREAS WITH THEIR BID. ALL DRAWINGS MUST INCLUDE ALL RELEVANT MEASUREMENTS,

More information

Jongen Werkzeugtechnik GmbH

Jongen Werkzeugtechnik GmbH STEP MILLING Type B22 Jongen Werkzeugtechnik GmbH Siemensring 11 D-47877 Willich Germany Phone: 0049 2154 9285 2900 Fax: 0049 2154 9285 9 2900 www.jongen.de Email: export@jongen.de THE TOOL Especially

More information

Aluminum Perforated Rolling Door

Aluminum Perforated Rolling Door Model ALUMA-VISION Perforated Curved or Flat Slats Rolling Service Door NOTE: For specifications, architects must choose from a variety of options. The standard choice will be shown first in plain text

More information

Think cost efficiency, Think HSS SAWING

Think cost efficiency, Think HSS SAWING Think cost efficiency, Think HSS SAWING SUMMARY BANDSAWING 2 The basics of bandsawing 3 HSS and coatings 4 The bimetal concept 5 Tooth set 6 Tooth pitch and forms 7 Speeds and feeds 8 Blade break-in 9

More information

Step 4: Can my rate of production be met with a single. Step 5: Prepare a simple line drawing of the ideal and

Step 4: Can my rate of production be met with a single. Step 5: Prepare a simple line drawing of the ideal and Design Guidelines PACLINE Enclosed Track Conveyor An enclosed track overhead conveyor consists of a powered chain running within a round track. Loads are suspended from the chain pendants that stick out

More information

WWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able

More information

DRUM MOTOR 220M-H 216.0Ø 0.37kW - 5.5kW, with steel helical gearbox

DRUM MOTOR 220M-H 216.0Ø 0.37kW - 5.5kW, with steel helical gearbox 58 DRUM MOTOR UNIT HANDLING Product description Drum motor very robust able to provide high torques and withstand high radial loads Characteristics Salt water resistant aluminum bearing housing Induction

More information

Conveyor Chains for the Cement Industry

Conveyor Chains for the Cement Industry Conveyor Chains for the Cement Industry in Partnership with Cement Makers Company history The Company was founded more than 70 years ago and is now one of the world s leading chain manufacturers. s know-how

More information

Bucket Elevators and Conveyors Commercial Series Material Handling

Bucket Elevators and Conveyors Commercial Series Material Handling Agri/Industrial Division Bucket Elevators and Conveyors Commercial Series Material Handling Agri/Industrial Division Chief bucket elevators are built to last and are easy to maintain. Our head section

More information

Bucket Elevators and Conveyors Commercial Series Material Handling

Bucket Elevators and Conveyors Commercial Series Material Handling Agri/Industrial Division Bucket Elevators and Conveyors Commercial Series Material Handling Agri/Industrial Division Chief bucket elevators are built to last and are easy to maintain. Our head section

More information

Trans-wheels. Ball Transfer Tables are a transfer medium for the multi-directional movement of goods on a horizontal plane.

Trans-wheels. Ball Transfer Tables are a transfer medium for the multi-directional movement of goods on a horizontal plane. Mini Wheel Conveyor Track The successful MINI WHEEL system is ideal for conveying small and light to medium weight packages down shallow gradients. Each 25mm wheel clips into it s own nylon cradle, which

More information

conveyor solutions Quality Performance Reliability

conveyor solutions Quality Performance Reliability conveyor solutions Quality Performance Reliability 2 3 4 Belt Conveyor For careful and extremely low noise conveying. 10 1 Lineshaft Powered Roller Conveyor The most versatile and economical powered conveyor

More information

Cimbria Conveying Equipment

Cimbria Conveying Equipment Cimbria Conveying Equipment Cimbria Conveying Equipment links key machines to form well-functioning industrial plants That is what we call Grain Care World-Wide Experience With its roots in Denmark, Cimbria

More information

INDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9

INDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9 INDEX Bonded Abrasives (cutting & grinding discs) page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9 Coated Abrasives (sanding

More information

Price/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291.

Price/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291. 2 Flute For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.

More information

SECTION ALUMINUM GATES

SECTION ALUMINUM GATES P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,

More information

Jongen Werkzeugtechnik. Working depth. Drilling by JONGEN. 3 x D. BP 04 to 12

Jongen Werkzeugtechnik. Working depth. Drilling by JONGEN. 3 x D. BP 04 to 12 Jongen Werkzeugtechnik Working depth 3 x D Drilling by JONGEN BP 04 to 12 THE TOOL New at Jongen: universally applicable high-performance drill for use on lathes and milling centers. It offers the highest

More information

Logistics and industry. Consignment sales

Logistics and industry. Consignment sales Logistics and industry Consignment sales Saving time and money for consignment sales Wanzl - a renowned name in the trade for more than 50 years and still favoured today for its sophisticated universal

More information

KNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING

KNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING KNIVES giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING ATLAS has comprehensive in-house designing facility to design new products according to customer s specific requirements with complete satisfaction

More information

SHAFT-MOUNTED FLAP WHEELS

SHAFT-MOUNTED FLAP WHEELS FLAP WHEELS 49 SHAFT-MOUNTED FLAP WHEELS Description: The abrasive flaps are radially arranged from the tool axis. RG shaft-mounted flap wheels are coupled to the electrical or pneumatic tool spindle by

More information

Tooth Chain. Quality & Perfection Renold Chains for the Glass Industry

Tooth Chain. Quality & Perfection Renold Chains for the Glass Industry Tooth Chain Quality & Perfection Renold Chains for the Glass Industry Tooth Chain IS machine and cross conveyors Conveyor Chain Scraper conveyors Transmission Chain For power transmission and packaging

More information

DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox

DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox 5 DRUM MOTOR UNIT HANDLING Product description The drum motor 16LS is able to provide high torques and withstand high radial loads. Characteristics Salt water resistant aluminum bearing housing Induction

More information

HDPE WATER CONTROL DEVICES

HDPE WATER CONTROL DEVICES HDPE WATER CONTROL DEVICES WHY HDPE? HDPE (high density polyethylene) is an extremely rugged thermoplastic that has been used in the water and wastewater industries for decades. Not to be confused with

More information

Part levellers. Materials Steel Aluminium Copper Brass Special alloys Bimetallic

Part levellers. Materials Steel Aluminium Copper Brass Special alloys Bimetallic PART LEVELLERS Part levellers SOPREM levellers ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of the source material. How

More information

Chain Driven Live Roller Conveyor (CDLR) Activated Roller Belt. Ball Transfer Tables. Chain Transfers. Continuous and Reciprocating Vertical Conveyor

Chain Driven Live Roller Conveyor (CDLR) Activated Roller Belt. Ball Transfer Tables. Chain Transfers. Continuous and Reciprocating Vertical Conveyor Activated Roller Belt Ball Transfer Tables Belt Conveyor Quickly rotates multiple package types using stationary or retractable bump turn Aligns packages quickly and positively for applications like print

More information

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...

More information

Technical features overview

Technical features overview Technical features overview Reference Product name Extraction Size Material Stroke direction Snap Locking* 5 Damping Max. load capacity per pair [N] Product category Product Section Steel X* 4 A B BM EG

More information

conveyor solutions Quality Performance Reliability

conveyor solutions Quality Performance Reliability conveyor solutions Quality Performance Reliability 2 3 4 Belt Conveyor For careful and extremely low noise conveying. 10 1 Lineshaft Powered Roller Conveyor The most versatile and economical powered conveyor

More information

NORMACONNECT Pipe Connections

NORMACONNECT Pipe Connections V Profile clamps The V profile clamps are reliable and time-effective connection elements for industrial use. Short description of technical features They are made to customer requirements and can be supplied

More information

Product Datasheet. Fire Hose Reel (Page 3)

Product Datasheet. Fire Hose Reel (Page 3) Product Datasheet Fire (Page 2) Fire Hose Reel (Page 3) Flush Type Hose Reel Cabinet (Page 4) GRP Fire cabinets are used for indoor and outdoor application with weatherproof and antistatic properties,

More information

Precision Lead Screws

Precision Lead Screws Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017

More information

LOADING DOCK SYSTEMS HIGH SPEED DOORS LIFT TABLES DOCK SHELTERS SECTIONAL DOORS COMPL. FOOD INDUSTRY L O A D I N G D O C K S Y S T E M S

LOADING DOCK SYSTEMS HIGH SPEED DOORS LIFT TABLES DOCK SHELTERS SECTIONAL DOORS COMPL. FOOD INDUSTRY L O A D I N G D O C K S Y S T E M S LOADING DOCK SYSTEMS HIGH SPEED DOORS LIFT TABLES DOCK SHELTERS SECTIONAL DOORS COMPL. FOOD INDUSTRY L O A D I N G D O C K S Y S T E M S LOADING DOCK SYSTEMS LOADING DOCK SYSTEMS Loading dock systems enable

More information

Product / Application Highlight

Product / Application Highlight Product / Application Highlight With the increase of precision machine technology the demand for specialized bearings that provide high performance and improved running life has increased substantially.

More information

Spare your collaborators.

Spare your collaborators. Englisch Spare your collaborators. www.pucest.com info@pucest.com PUCEST OVERVIEW FLYER Spare your collaborators... Complex and time-consuming repairs. Bugged collaborators THE solution... The PUCEST wear

More information

(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI)

(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) (G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) 4021 : Specification for teak wood. 287 : Recommendation for maximum permissible moisture content 1141 : Specification for code

More information

Richter Sealless Chemical Magnetic Drive Pumps

Richter Sealless Chemical Magnetic Drive Pumps Richter Sealless Chemical Magnetic Drive Pumps MNK, MNK-B Up to 00 m /h Reinforced plain bearing engagement Linings PFA/PTFE, PFA-L, PE, PFA-P Richter sealless chemical magnetic drive pumps Fields of application

More information

Fundamentals of Machine Component Design

Fundamentals of Machine Component Design FOURTH E D I T I O N Fundamentals of Machine Component Design ROBERT C. JUVINALL Professor of Mechanical Engineering University of Michigan KURT M. MARSHEK Professor of Mechanical Engineering University

More information

MATERIALS AND TECHNOLOGY

MATERIALS AND TECHNOLOGY S56 Coimisiún na Scrúduithe Stáit State Examinations Commission JUNIOR CERTIFICATE EXAMINATION, 2006 MATERIALS AND TECHNOLOGY METALWORK - ORDINARY LEVEL 100 Marks Tuesday, 20 June, Afternoon, 00 to 30

More information

uni Material and Color Overview

uni Material and Color Overview uni Material and Color Overview B Blue I Ivory P Purple BR Brown L Light rey an D Red rey hite D Dark rey xtra rey ellow DD reen Dark Red LB Black Light Blue atural color of the specific material O Orange

More information

SPECIFICATIONS. Section Ornamental Fences and Gates

SPECIFICATIONS. Section Ornamental Fences and Gates SPECIFICATIONS Section 02825 - Ornamental Fences and Gates Spec-Data Sheet 1. PRODUCT NAME Ultra Aluminum Industrial Picket Fence 2. MANUFACTURER Ultra Aluminum Mfg., Inc 2124 Grand Commerce Drive Howell,

More information

Milling tools made by JONGEN! C10 FP 124. Face Milling

Milling tools made by JONGEN! C10 FP 124. Face Milling Milling tools made by JONGEN! Face Milling C10 FP 124 THE TOOL Especially efficient face milling cutter for the roughing and finishing machining Axial depth of cut max. 5 mm, with 8 effective cutting edges

More information

Conveyor systems. Reliability and experience based on tradition. Hinged belt conveyors Scraper conveyors Belt conveyors

Conveyor systems. Reliability and experience based on tradition. Hinged belt conveyors Scraper conveyors Belt conveyors Conveyor systems. Reliability and experience based on tradition. Page Hinged belt conveyors..................... 10 Scraper conveyors........................ 16 Belt conveyors...........................

More information

Core drills PRECISION TOOLS

Core drills PRECISION TOOLS ORE DRILLS ore drills ore drills ore drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals. ore drills E- ore drills

More information

PRODUCT OVERVIEW. Engineering Class Chain Agricultural Chain Precision Roller Chain Sprockets Environmental Products

PRODUCT OVERVIEW. Engineering Class Chain Agricultural Chain Precision Roller Chain Sprockets Environmental Products PRODUCT OVERVIEW Engineering Class Chain Agricultural Chain Precision Roller Chain Sprockets Environmental Products ALI Star of Quality OUR LONG HISTORY Allied-Locke Industries was founded in 1965 by Robert

More information

Benefit from more than 60 years of experience with self-lubricating bearings

Benefit from more than 60 years of experience with self-lubricating bearings DEVA Product range Engineering Services DEVA more than just bearings Benefit from more than 60 years of experience with self-lubricating bearings Use our extensive material and application knowledge in

More information

SYSTEMS STORAGE STORAGE SYSTEMS. Shelving 200. Pallet Racking. Storage Containers 203. Part Bins & Accessories. Hospitality & Medical Storage 204

SYSTEMS STORAGE STORAGE SYSTEMS. Shelving 200. Pallet Racking. Storage Containers 203. Part Bins & Accessories. Hospitality & Medical Storage 204 STORAGE SYSTEMS Shelving 200 Storage Containers 203 Hospitality & Medical Storage 204 Pallet Racking Pallet Racking Accessories Pallet Racking Part Bins & Accessories Lamson Range Economy Range 206 207

More information

Rexnord 1843 TAB TableTop Chain on Carbon Steel Base Chain

Rexnord 1843 TAB TableTop Chain on Carbon Steel Base Chain Side-flexing 1843 TB (S) Photo shows 1843 TB TableTop with top plates molded in Black Wear Resistant (BWR) material on Carbon Steel (S) base chain. Information Min. Side-flex pproximate Weight 1 1/4 1.25

More information

Index INDEX. Technical Characteristics Technical Dimensions Polyamide Light Roller Load Capacity... 7

Index INDEX. Technical Characteristics Technical Dimensions Polyamide Light Roller Load Capacity... 7 U-RAIL Svanemærket tryksag 541-713 INDEX Index Technical Characteristics... 4-5 Technical Dimensions... 6 Polyamide Light Roller Load Capacity... 7 Polyamide Light Roller with Flange... 8-16 Standard Roller...

More information

Hitachi Metals Techno Ltd. Quality Guaranteed

Hitachi Metals Techno Ltd. Quality Guaranteed Hitachi ENVIRONMENTAL SCRAPER COMPONENTS & SYSTEMS FOR THE SEWAGE AND WASTE WATER TREATMENT INDUSTRY As the Exclusive Australian Distributor for Hitachi Environmental Products, GB Power Transmission offers

More information

SBF-P 2000 & SBF-P 2254 FLAT TOP CHAIN CONVEYORS

SBF-P 2000 & SBF-P 2254 FLAT TOP CHAIN CONVEYORS Technical Documentation SBF-P 2000 & SBF-P 2254 FLAT TOP CHAIN CONVEYORS Each serial number is unique to that specific conveyor and provides mk North America with complete order details. The conveyor serial

More information

CHAIN CONVEYOR CONVEYING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE

CHAIN CONVEYOR CONVEYING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE GB CHAIN CONVEYOR CONVEYING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE FOR COMPLETELY CLOSED DUSTPROOF CONVEYING OF DRY BULK MATERIALS SIMPLICITY AND SAFETY Many years

More information

Øyvind Hagen / Statoill. Self-lubricating bearings for Steel Applications

Øyvind Hagen / Statoill. Self-lubricating bearings for Steel Applications Øyvind Hagen / Statoill Self-lubricating bearings for Steel Applications High performance materials Metal based backing with deva.metal sliding layer and stainless steel backing and PTFE as lubricant maintenance-free

More information

Solutions for forklifts, industrial vehicles and automated transport systems

Solutions for forklifts, industrial vehicles and automated transport systems orklifts Solutions for forklifts, industrial vehicles and automated transport systems plastics for longer life w 2-3 Reliable and 100% lubrication-free Your technical innovator and cost reducer, Christian

More information