WE LIVE COPPER MKM MANSFELDER KUPFER UND MESSING GMBH
|
|
- Milo Doyle
- 6 years ago
- Views:
Transcription
1 Flat bars MKM supplies flat bars from 20 x 2 mm to a maximum width of 210 mm and thickness of 20 mm, thus covering the entire range in this segment. Besides offering the full assortment of standard dimensions, we also provide a wide variety of intermediate sizes. The flat bars can be manufactured with rounded or square edges as well as with half-round sides. Our flat bars are chiefly used in switchgear construction in the area of low and medium voltage but also for power distribution systems (bus bars), transformers, a wide variety of electrical components, and for electromechanical engineering applications. Depending on the specifications and the wishes of the customer, we can also supply our bars with reduced hardness levels compared with the standard specifications. MKM flat bars have excellent flexural properties and are therefore suitable for a wide variety of uses. The major standard sizes can be supplied ex stock if required urgently. We also provide flat bars as tin-coated versions to serve the needs of our customers even better. Flat bars mm Thickness from 2 to 50 mm Width from 10 to 210 mm / / /260 Flat bars with rounded and square edges as well as with half-round sides Other dimensions available on request
2 ound bars / square bars MKM supplies round bars in sizes from 6 mm to 165 mm for a wide range of electrotechnical applications. Besides the primary material ETP, we are also increasingly supplying customers with OF and OFE bars for high-quality requirements, such as in vacuum technology. Copper bars can be manufactured up to 152 mm in diameter as a drawn version with a very good surface and restricted tolerances and in hardnesses and strengths according to customer specifications. Thanks to the high MKM copper quality and a special alloy known as V-Copper as well as a straightness of 1 mm/m, our round bars are suitable for machining on modern high-performance automatic lathes. ound bars for lathe shops can also be supplied with chamfered ends on request. By performing a separate eddy current test, it is possible to guarantee a faultless surface for special requirements. Furthermore, we supply CuSP (sulphur copper) bars with particularly good machining characteristics. Thanks to the quality of the material, MKM copper bars are perfect for customers wishing to perform special technological processing, like cold extrusion. Besides drawn bars, MKM also supplies a large assortment of extruded bars for the hot stamping (forging) of copper workpieces. Square bars which can be supplied as drawn versions up to 100 mm square as well as hexagonal bars complete our range. Diameter/edge lengths in mm Square pressed Square drawn ound pressed ound drawn Other hardnesses and strengths are available on request
3 Profiles MKM is increasingly developing into a supplier of profiles in particular sophisticated profiles manufactured according to drawings. The profiles can be supplied as extruded or drawn versions up to a maximum cross sectional area of 10,000 square millimetres. With this supply of special profiles, our customers can find efficient tailored solutions for their products and achieve material savings. When it comes to manufacturing complex profiles from drawings, we are able to draw on our many years of expertise plus our own tool production facilities with modern wire eroding equipment. Our technicians look forward to advising you personally in order to work out the appropriate delivery specifications.
4 Cu materials /alloys European standard DIN standard (old) ASTM Typical properties/ applications Cu-ETP CW004A E-Cu 58 E-Cu C11000 Standard alloy for electrical components, main application in switchgear construction Manufacturing standard Cu-HCP Cu-PHC CW021A CW020A SE-Cu C10300 Hydrogen resistant, very high conductivity, good weldability Cu-OF CW008A OF-Cu C10200 Hydrogen resistant, very high conductivity, very good weldability Cu-OFE CW009A C10100 High purity, Cu % for vacuum switchgears, semiconductors, electron tubes CuAg0.10 CW013A CuAg C11600 For electric motors/ propulsion technology CuAg0.10P CW016A CuAg0.1P C11700 Main alloy for the construction of generators/ propulsion technology Cu-DHP CW024A SF-Cu C12200 Very good weldability, without any particular conductivity requirements CuSP CW114C CuSP C14700 Good machining charac teristics; usage as work pieces for turning on automatic lathes, for contact parts, and for welding nozzles DIN EN DIN EN DIN EN We can also supply further CuAg materials, such as CuAg0.2, CuAg0.03, and CuAg0.04. Supply according to other international standards, such as JIS or GOST, is possible by arrangement.
5 Contact: MKM Mansfelder Kupfer und Messing GmbH Lichtlöcherberg 40 D Hettstedt Germany Phone: +49 (0) Fax: +49 (0) September 2010
Carrying every form of energy. Bar none.
Bars and profiles 2 OUR ASPIRATION Carrying every form of energy. Bar none. Energy in the 21 st century is demanding. It has to be ecologically viable, available at all times, efficient and cheap which
More informationStrips Transformer strip
Strips Transformer strip 2 OUR ASPIRATION Electricity in the 21 st century? We re ready. The global energy market is changing profoundly. It s shifting from non-renewable consumption towards renewable
More informationIndustrial Rolled Copper and Copper Alloy Products
KME Germany GmbH & Co. KG Copper and Copper Alloy Products [EN] Industrial Rolled Copper and Copper Alloy Products KME Germany GmbH & Co. KG KME and copper Our modern world would be impossible without
More informationCopper sections for various applications
Copper sections Copper sections for various applications Company portrait The Wieland Group, with headquarters in Ulm, Germany, is one of the world s leading manufacturers of semi-finished and special
More informationSHEETS, PLATES, CIRCLES MADE OF COPPER AND COPPER ALLOYS
SHEETS, PLATES, CIRCLES MADE OF COPPER AND COPPER ALLOYS Cu As we cast the slabs for our plates, sheets and circles in our own foundry, we can ensure highest quality and flexibility. 02 WE MAKE QUALITY
More informationPlates and sheets Special alloys
Plates and sheets Special alloys 2 OUR ASPIRATION Special maybe but normal for us. You get jobs that are unique. The customer wants something outside of the box not least because it is a one off. Be it
More informationAircraft. Automotive. Electronic. Oil and Gas
4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic
More informationNON-FERROUS METAL DISTRIBUTION CAST-PLATE PRODUCTION CNC-PROCESSING. AMCO at a glance. My supplier has to deliver on his promise. I count on AMCO.
NON-FERROUS METAL DISTRIBUTION CAST-PLATE PRODUCTION CNC-PROCESSING AMCO at a glance My supplier has to deliver on his promise. When metal and service shine. Quality starts by giving the customer s thinking
More informationSteel in the supply chain. Processing, procurement, distribution.
Steel in the supply chain. Processing, procurement, distribution. Efficiency and expertise in the supply chain The best steel, in the right quantity, at the right time, at the right place: Steel distribution
More informationCERTEC. Copper Bars. A company of the Wieland-Group
CERTEC Copper Bars A company of the WielandGroup Innovative by tradition buntmetall amstetten was founded in 1904 and, with sites in Amstetten and Enzesfeld, it is one of the most modern producers of semifinished
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationContinuous Casting Mould Plates For Slab/ Bloom/ Beam Blank/ Vertical Casters
R Complete Competence in Copper Continuous Casting Mould Plates For / Bloom/ Beam Blank/ Vertical Casters Mould Plate Bloom Mould Plate Beam Blank Mould Plate Casting Bloom Casting Beam Blank Casting s
More informationWE OPEN HORIZONS Special Profiles made from Steel
WE OPEN HORIZONS Special Profiles made from Steel Hoesch Schwerter Profile GmbH Eisenindustriestrasse 1 D-58239 Schwerte Tel.: ++49 (0) 23 04 106-608 Fax: ++49 (0) 23 04 106-591 E-Mail: info@hoesch-profile.com
More informationStrip for connectors
Strip for connectors REQUIREMENTS TO THE COPPER BASE MATERIAL COPPER AND COPPER ALLOYS FOR A WIDE VARIETY OF CONNECTORS Connection technology for electronic components has to fulfill various tasks using
More informationKoppar och kopparlegeringar Sömlösa kopparrör för elektriska ändamål
SVENSK STANDARD SS-EN 13600 Fastställd 2002-04-12 Utgåva 1 Koppar och kopparlegeringar Sömlösa kopparrör för elektriska ändamål Copper and copper alloys Seamless copper tubes for electrical purposes ICS
More informationFacts & Figures Aurubis Specialty Wire
Specialty Wire Facts & Figures Aurubis Specialty Wire 2010 Aurubis first cast the lead-free, machinable brass alloy BlueBrass in accordance with RoHs. > 1,000 profile shapes are manufactured using our
More informationFacts & Figures Aurubis Specialty Wire
Specialty Wire Facts & Figures Aurubis Specialty Wire 2010 Aurubis first cast the lead-free, machinable brass alloy BlueBrass in accordance with RoHs. > 1,000 profile shapes are manufactured using our
More informationTechnical Information
Technical Information Material Data Sheet Magnesium Mg KG High performance materials in form and function 2 Magnesium and Magnesium wrought alloys are the ideal material for extremely light components.
More informationStandard Specification for Brass Rod, Bar, and Shapes 1
Designation: B 2 03 Standard Specification for Brass Rod, Bar, and Shapes This standard is issued under the fixed designation B 2; the number immediately following the designation indicates the year of
More informationContact Details The SDK Group (Shah Dipchand Kisnaji & Co/ B.R Metal/ Global IndiFest Inc), Sanjay Jain/ Kunal Jain Mumbai (India).
Contact Details The SDK Group (Shah Dipchand Kisnaji & Co/ B.R Metal/ Global IndiFest Inc), Sanjay Jain/ Kunal Jain Mumbai (India). Tel: +91-22-67438288/ +91-9820663840 / +91-9004551169 Email: sales@sdkmetals.com/
More informationCopper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
More informationAlcobra has the non-ferrous metal you're looking for.
Looking for Copper? Alcobra has the non-ferrous metal you're looking for. Welcome to Alcobra! We will support you with a full service for the procurement and logistics of semi-finished, non-ferrous metal
More informationThe following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
More informationCARBON STEEL BARS HOT ROLLED
CARBON STEEL BARS HOT ROLLED Grade Description...3-2 Rounds...3-3 thru 3-4 Strip...3-5 Flats (A-36)...3-6 thru 3-8 (M1044)...3-9 Squares...3-9 Reinforcing Bars...3-10 Reinforcing Mesh...3-10 TOLERANCES...3-11
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 6363-1 Second edition 2012-07-15 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 1: Technical conditions for inspection and delivery Aluminium
More informationCopper & Copper Alloys CuZn38Pb2 (OF 2361)
Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information
More informationCopper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.
More informationspeciality wires Solutions for automotive, aviation, Aerospace, Power distribution, Steel industry & consumer goods
speciality wires Solutions for automotive, aviation, Aerospace, Power distribution, Steel industry & consumer goods www.lamifil.be Lamifil Speciality wires Working with Lamifil means working with a partner.
More informationCold-rolled steel strips in best shape. Cold-rolled, surface-refined and precise.
Cold-rolled steel strips in best shape. Cold-rolled, surface-refined and precise. Cold-rolled steel strips for sophisticated applications Thin, wide and with special material properties: Precision strip
More informationRolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Buderus Edelstahl Buderus Edelstahl CONTENTS Buderus Edelstahl 2 Products 4 Production 5
More informationCopper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
More informationspeciality wires SOLUTIONS FOR AUTOMOTIVE, AVIATION, AEROSPACE, POWER DISTRIBUTION, STEEL INDUSTRY & CONSUMER GOODS
speciality wires SOLUTIONS FOR AUTOMOTIVE, AVIATION, AEROSPACE, POWER DISTRIBUTION, STEEL INDUSTRY & CONSUMER GOODS WWW.LAMIFIL.BE Lamifil Speciality wires Working with Lamifil means working with a partner.
More informationAluminium products. 100 YEARS OF EXPERIENCE A LEADING EUROPEAN INTEGRATED MANUFACTURER OF PRODUCTS ExtrudED FROM HARD ALUMINIUM ALLOYS
Aluminium products Bars TubeS profiles 100 YEARS OF EXPERIENCE A LEADING EUROPEAN INTEGRATED MANUFACTURER OF PRODUCTS ExtrudED FROM HARD ALUMINIUM ALLOYS Constellium Ideas shaping the world History The
More informationLubricants for massive forming Cold, semi-hot and hot forging
Lubricants for massive forming Cold, semi-hot and hot forging Tailor-made solutions for each application New forming technologies in the forging industry as well as increasing energy costs and more severe
More informationCopper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
More informationENDURANCE. Cold-formed hollow sections offering superior quality and Efficiency benefits. voestalpine Krems GmbH
ENDURANCE Cold-formed hollow sections offering superior quality and Efficiency benefits voestalpine Krems GmbH www.voestalpine.com/krems HOLLOW SECTIONS OFFERING SUPERIOR QUALITY AND EFFICIENCY BENEFITS
More informationSPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY BAR AND WIRE
Company Website: www.metalspiping.com Your Reliable Supplier of Special Alloys! SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY BAR AND WIRE SB-550/SB-550M (Identical with ASTM Specification B550/B550M-07(R2).)
More information2.0 High Conductivity Copper
2.0 High Conductivity Copper The electrical properties of high conductivity copper were standardised in 1913 by the International Electrotechnical Commission which defined the International Annealed Copper
More informationIndustrial Rolled. Thick plates & discs. Thick plates & discs [GB] KME Group S.p.A.
Industrial Rolled Thick plates & discs KME Group S.p.A. Thick plates & discs [GB] KME s thick plates & discs One of the most comprehensive offers available on the market As one of the major world suppliers
More informationCatalogue of European standards in the aluminium and aluminium alloys field
Catalogue of European standards in the aluminium and aluminium alloys field Under revision New publications during last two years (2017-2018) September 2018 David KRUPKA AFNOR Normalisation Industrial
More informationHEICO FORMING TECHNOLOGY COLD FORMED PARTS
www.heico-group.com HEICO FORMING TECHNOLOGY COLD FORMED PARTS HEICO ON YOUR SIDE The HEICO group, based in the town of Ense in Westphalia, Germany, is a dynamic family business with a long tradition.
More informationOxygen-free copper for industrial applications
Oxygen-free copper for industrial applications Pure, flexible, connective and unbeatable Luvata Special Products is a pioneering company in the development and production of oxygen-free copper, which is
More informationA wide range of cold-formable steel grades and aluminium alloys are used as wire materials within a diameter range from 5 mm to 34 mm.
Cold-Formed Parts 2 ESKA manufactures complex precision cold-formed parts for applications with large and medium quantities. The highly-efficient cold- forming process ensures economic manufacture of near-net-shape
More informationHot rolled flat steel bars
Business contact Riva Acciaio - Viale Certosa, 24-1 Milan (Italy) Phone +3 02..0 - Fax +3 02.300.346 Email commerciale.riva@rivagroup.com Revision 01/1 Revision: 01/1 - Page 2 of STEEL RANGE Structural
More informationMaterial designation: EN-Material No. DIN-Material No. EN AW-5754 [EN AW-Al Mg3]
Material Data Sheet Aluminium alloy Materials Services Technology, Innovation & Sustainability Page 1/5 Material designation: EN-Material No. DIN-Material No. EN AW-5754 [EN AW-Al Mg3] 3.3535 Scope This
More informationSS-EN ISO 9001 SS-EN ISO 14001
UDDEHOLM FORMAXTM This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty
More informationUddeholm Formax. Formax is a trademark registered in Sweden
Uddeholm Formax Formax is a trademark registered in Sweden UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder.
More informationA Composite Material Made to Order Quality straight from the rolling mill
Roll Clad Strips A Composite Material Made to Order Quality straight from the rolling mill In roll cladding two or more different materials are com - bined to achieve the optimum of the best characteristics
More informationHigh-Quality Tool Steel Hot-Work Steels
High-Quality Tool Steel Hot-Work Steels Hot-forming tools are needed for chipless forming of workpieces from iron and non-ferrous materials and their alloys as well as the production of articles of daily
More informationCopper & Copper Alloys CuNi1Si (OF 2403)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5659L Issued SEP 1965 Revised JAN 2004 Superseding AMS 5659K Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 8: Forming Processes (Rolling, Extrusion, Forging, Drawing) DR. SOTIRIS L. OMIROU Forming Processes - Definition & Types - Forming processes are those in which
More informationStandard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes 1
Designation: B 124/B 124M 06 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes 1 This standard is issued under the fixed designation B 124/B 124M; the number immediately following
More informationPowerode the universal high performance electrode
the universal high performance electrode Powerode : a dedicated and exclusive process Lebronze alloys has always been committed a process of continuous improvement. This allied with a Research & Development
More informationMaterial Specification
Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength
More informationAluminum bronzes & Copper Alloys. Alloys in Premium Quality, CNC Processing, Tailoring, Service
Aluminum bronzes & Copper Alloys Alloys in Premium Quality, CNC Processing, Tailoring, Service the Specialist for Aluminum Bronzes and Copper Alloys Your specialization is in metal forming tools such as
More informationFlat bar & square bar Hot rolled, weldable structural steel sections
Data sheet: E4.1 Flat bar & square bar Hot rolled, weldable structural steel sections General description ArcelorMittal Steel South Africa, Newcastle Steel produces an extensive range of structural steel
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21610 First edition 2009-12-15 Corrosion of metals and alloys Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels Corrosion des
More informationThis paper was presented at the CARTS-EUROPE '98 in Nizza DEVELOPMENTS ON LEAD WIRES - NEW MATERIALS AND REVISED SPECIFICATIONS -
This paper was presented at the CARTS-EUROPE '98 in Nizza DEVELOPMENTS ON LEAD WIRES - NEW MATERIALS AND REVISED SPECIFICATIONS - Gerhard Bürstner (Dipl.-Ing. Dipl. Wirtsch. Ing. ) Eckhard Fröhlich (Dipl.
More informationEHG aluminium and non-ferrous metals: tonnes in 3,000 dimensions in stock.
EHG aluminium and non-ferrous metals: 2.000 tonnes in 3,000 dimensions in stock. Excerpt from the EHG stock program. Complete EHG stock program: EHG aluminium plate cut lengths Aluminium panel saw up to
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
More informationLow-Alloyed Copper Alloys. Properties Processing Applications
Low-Alloyed Copper Alloys Properties Processing Applications Contents 1. Introduction 4 1.1 Classification 6 1.2 Standardized low-alloyed coppers and their applications 7 2. Copper alloys with very high
More informationBackground Statement for SEMI Draft Document 5335 REVISION OF SEMI PV GUIDE FOR TESTING PHOTOVOLTAIC CONNECTOR RIBBON CHARACTERISTICS
Background Statement for SEMI Draft Document 5335 REVISION OF SEMI PV19-0811 GUIDE FOR TESTING PHOTOVOLTAIC CONNECTOR RIBBON CHARACTERISTICS Notice: This background statement is not part of the balloted
More informationINDEX. page. page. page TALOS ECUTHERM SOLAR COPPER TUBES DOMA COPPER STRIPS TALOS SOLAR PLUS COPPER TUBES
03 INDEX page 05 TALOS SOLAR PLUS COPPER TUBES page 06 TALOS ECUTHERM SOLAR COPPER TUBES page 08 DOMA COPPER STRIPS 04 Advantages of Copper in Solar Systems High thermal conductivity, the highest of all
More informationLow-Alloyed Copper Alloys. Properties Processing Applications
Low-Alloyed Copper Alloys Properties Processing Applications Contents 1. Introduction 4 1.1 Classification 6 1.2 Standardized low-alloyed coppers and their applications 7 2. Copper alloys with very high
More informationHigh-Tech Copper Products for Solar Systems
High-Tech Copper Products for Solar Systems KME Germany GmbH & Co. KG High-Tech Copper Products for Solar Systems [GB] High-Tech Copper Products for Solar Systems Cell Coating layer Copper strip 2. 4.
More informationEXCEPTIONAL SPEED REQUIRES EXCEPTIONAL SAFETY
EXCEPTIONAL SPEED REQUIRES EXCEPTIONAL SAFETY Docol R8 Tube. www.docol.com RACING JUST CHANGED FOREVER As pioneers in advanced high strength steel, we have a proven track record of helping our customers
More informationStandard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire 1
Designation: B 473 96 (Reapproved 2002) e Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire This standard is issued under the fixed designation B 473; the number
More informationProducts and Services
Products and Services Experts in special steel long products DEUTSCHE EDELSTAHLWERKE is a leading manufacturer of special steel long products. Our broad product range has acquired us a virtually unique
More information1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature
More informationHigh Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³
Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Rest % Ni 3 % Si.65 % Mg.15 % This alloy is in accordance with RoHS 22/96/CE for electric &
More informationCompetence centre for pipes. Steel pipes, precision steel pipes and structural hollow sections for steel construction.
Competence centre for pipes. Steel pipes, precision steel pipes and structural hollow sections for steel construction. Precision pipes in the highest quality Interfer Rohrunion and Interfer Präzisrohr
More informationCOOLING SOURCE - THE DIFFERENCE
COOLING SOURCE - THE DIFFERENCE MISSION STATEMENT Cooling Source aims to deliver the highest value of services and products in a timely manner to our customers as the premier thermal solutions manufacturer,
More informationProducts List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. FAX: MOBILE: MSN :
Products List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. WEB:www.Getwick.cn TEL:+86-917-3637501 FAX:+86-917-3637508 MOBILE: +86-18291726950 MSN : getwick@msn.cn 1. Product name: titanium rod Material:
More informationThe Convenience Stores For Metal
STEEL BARS Data and Specifications C1018 Cold Finished Bar A low carbon steel with medium manganese content. Applications: Cold forming and bending operations (for severe bends stress relieving may be
More informationSpecial profiles for linear motion systems
Special profiles for linear motion systems Company information VOL-Stahl Group of Companies serves different sectors of industries with high-quality special profiles with complex cross-sections. The profiles
More informationHigh Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)
Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy
More informationINDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
More informationBulk Deformation Processes
Bulk Deformation Processes Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 TOPIC OUTLINE What is Bulk Deformation? Classification of Bulk Deformation Processes Types
More informationCopper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)
Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
More informationEXCEPTIONAL SPEED REQUIRES EXCEPTIONAL SAFETY
EXCEPTIONAL SPEED REQUIRES EXCEPTIONAL SAFETY Docol R8 Tube. www.docol.com As pioneers in advanced high strength steel, we have a proven track record of helping our customers develop the cars of tomorrow
More informationHEAVY PLATE FOR PETROCHEMICAL REACTORS SOPHISTICATION IN CHROMIUM-MOLYBDENUM STEEL DILLINGER HÜTTE GTS
HEAVY PLATE FOR PETROCHEMICAL REACTORS SOPHISTICATION IN CHROMIUM-MOLYBDENUM STEEL DILLINGER HÜTTE GTS EXPERIENCE THAT MASTERS EVEN THE GREATEST DEMANDS Construction of reactors and vessels for the petrochemicals
More informationKÖNIG + CO. FORMING KNOW-HOW
FORMING KNOW-HOW FORMING KNOW-HOW 2 3 FORMING KNOW-HOW 4 Bödenpresswerke. Committed to tradition. Focus on the future. KÖNIG + CO. GmbH is an owner-managed family company with a history of more than eighty
More informationMulti-gauge strip. Wieland-Werke AG, Vöhringen plant. Wieland-Werke AG, Langenberg plant. Wieland Metals Singapore (Pte.) Ltd.
Multi-gauge strip Multi-gauge strip The Wieland Group headquartered in Ulm, Germany, is one of the world s leading manufacturers of semi-finished and special products in copper and copper alloys: strip,
More informationCROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS
CROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS YOUR PARTNER IN HYDRAULICS Cromax products from Ovako are the preferred choice for many hydraulic-cylinder manufacturers
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT ROLLED PICKLED PRODUCTS Our continuous pickling line works on hydrochloric acid. Strips are made endless by using laser welding machine and then they go through a stretch-descaling
More informationCrucibles, Moulds and Components for Remelting Plants. SMI Group. Engineering. Materials. Manufacturing. Maintenance
Crucibles, Moulds and Components for Remelting Plants Engineering Materials Manufacturing Maintenance SMI Group Table of Contents 2 The KME Group / BU Engineered Products Division 6 ACT Advanced Crucible
More informationMetal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
More informationPlasma Cutting System
Plasma System Hiocus i The All-Rounder for Marking and from 0.5 to mm with Highest Productivity Soft-Switch-Inverter made in Germany Productivity - quality - flexibility: decisive in the competition Since
More informationCONTIROD TECHNOLOGY. High sustainability and top quality for copper rod
CONTIROD TECHNOLOGY High sustainability and top quality for copper rod Constant improvements in the technology and design of CONTIROD plants as well as the know-how of SMS group are the key to each plant
More informationAPPLICATION Swebor Wear plates are designed for use in construction, mining, agricultural machinery and other equipment. GRADE C Si MN P S Cr B
WEAR PLATES REFLECTING THE MINDSET OF PEOPLE WHO MAKE IT DATASHEET MATERIAL The Swebor Wear plates family is both hard and tough, yet easily formable and weldable. Wear plates from Swebor have a unique
More informationINDEX. page. page. page TALOS ECUTHERM SOLAR COPPER TUBES DOMA COPPER STRIPS TALOS SOLAR PLUS COPPER TUBES
03 INDEX page 05 TALOS SOLAR PLUS COPPER TUBES page 06 TALOS ECUTHERM SOLAR COPPER TUBES page 08 DOMA COPPER STRIPS 04 Advantages of Copper in Solar Systems High thermal conductivity - the highest of all
More informationOur philosophy at your service
CPC Inox is a leader in stainless steel since 1976 Our philosophy at your service Three production sites in Italy, sales branches in France (CPC Inox France) and Germany (CPC Inox Deutschland): CPC Inox
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More informationIndustrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic
More informationCuSn0,15 (STOL 81) C14415 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties
More informationCompany. Hot rolling Cold rolling Cold drawing Laser fusion Davex. For further information, please visit us at
Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established in 1983 in Switzerland, Montanstahl has achieved a high level
More informationUHS Ultra High-strength Seamless, Hot Rolled Hollow Sections from ISMT
UHS Ultra High-strength Seamless, Hot Rolled Hollow Sections from ISMT UHS Ultra High strength, Seamless, Hot Rolled Hollow Sections from ISMT (conforming to EN 10210) Widen your possibilities Modern architectural
More informationHigh-Quality Tool Steel Made in Germany
High-Quality Tool Steel Made in Germany Multiblocks are a special product of our company. These are hot-work steels, made by the ESR-route, with large cross-sections offering identical property values
More information