Research Centre of Advanced Materials and Technologies for Recent and Future Applications PROMATECH

Size: px
Start display at page:

Download "Research Centre of Advanced Materials and Technologies for Recent and Future Applications PROMATECH"

Transcription

1 Research Centre of Advanced Materials and Technologies for Recent and Future Applications PROMATECH

2 Slovak Academy of Sciences Pavol Jozef Šafárik University in Košice Technical University of Košice High research with potential of commercial interest High-tech materials and technologies Technological transfer

3 ... more than 40 new laboratories for materials research in: Žiar nad Hronom Košice Pavilion of Materials Sciences, Košice Technological Pavilion, Žiar nad Hronom Pavol Jozef Šafárik University in Košice

4 Research activities: 1. Research and development of modern steels, powder metallurgy products and hard coatings: a) Research and development of PVD coatings with increased hardness and with reduced friction coefficient for power transmission into bearing and gearing mechanisms b) R&D of technology for production of electrocontact materials by the powder metallurgy c) Research of relation between tribological pair: instrument & material for solving pressing technology problems d) Research and development of grain oriented electrical steels with lower active losses e) Research and lightening possibilities demonstration of structural components through the use of aluminium composities and foams

5 Research activities: 2. Research and development of materials for biomedical and enviromental technologies a) Magnetic nanoparticles functionalized with drugs, polymers and surfactants and their applications for serious illness treating, such as cancer, cardiovascular and amyloid diseases b) Preparation and characterization of biocomposite cement systems for biomedical applications c) Research of modifiability of carbon and silicate raw materials contaminated by blind and harmful mineral mixtures in order to preparation of monomineral concentrates for commercial applications

6 Research activities: 3. Materials for ICT technologies and cryotechnologies a) Research and development of new technologies for preparation of bulk monocrystalline superconductors for heavy-current applications used as superconducting permanent magnets b) Research of nanostructured semiconductors for ICT technology memory components

7 Research activities: 4. Research and development of new magnetic materials a) New materials for sensor systems with increased sensibility and improved noise characteristics b) Microwires with increased sensibility to external variables like as temperature, mechanical stresses and magnetic fields, for application in microsenzors c) Pressed magnetic soft composite materials for mid-frequency applications 5 mm

8 Research activities projects realized by consortium partners Founded by European Commission Framework Programmes: 7.FP EU MAMINA: Macro, Micro and Nano Aspects of Machining 7.FP EU SILTRANS: Micro and Nanocrystalline Silicide - Refractory Metals FGM for Materials Innovation in Transport Applications 7.FP EU MATRANS: Micro and Nanocrystalline Functionally Graded Materials for Transport Applications 7.RP EU: European Microkelvin Collaboration 6.FP EU NENAMAT: Network for Nanostructured Materials 6.FP KMM-NOE: Knowledge-based Multicomponent Materials for Durable and Safe Performance 6.FP EU NESPA: NanoEngineered Superconductors for Power Application 6. RP EU Extremat: New materials for extreme environments 6. RP EU HIGHTEMAL: Bulk nanostructured Al profiles for applications at elevated temperatures 5.FP EU SICMAC: Structural Integrity of Ceramic Multilayers and Coatings

9 Research infrastructure - Advanced technologies Melt Spinner SC Spark Plasma Sintering NanospiderTM NS LAB 200 Mechanochemistry PVD Cryofox 500 HiTUS new technology of thin film sputtering TruLaser Station 3003

10 Research infrastructure Structural and chemical analysis Scanning electron microscope EVO MA15 EDX/WDX, (Carl Zeiss) Nanoparticle tracking analysis system NanoSight LM10 Raman microscope XploRA Horiba Yvon Jobin Glow Discharge Optical Emission Spectroscopy (GDOES) Optical Profiler Plu neox Sensofar

11 Research infrastructure Structural and chemical analysis TEM and HREM Transmission Electron Microscope JEOL JEM-2100F UHR

12 Research infrastructure Structural and chemical analysis - FIB CrossBeam system AURIGA Compact: SEM (scanning electron microscope ) FIB (focused ion beam)

13 Research infrastructure Mechanical properties Corrosion testing system Scratch tester Bruker UMT 2M Tribometer Bruker UMT 3MT Nanoindenter Agilent G200 Micro-nano indenter TTX NHT

14 Research infrastructure Functional properties Scanning Hall probe microscope-shpm STA 449 F1 Jupiter Simultaneous TGA-DSC Magnetic properties measurement system (MPMS) Perkin Elmer DSC 8500 Differential Scanning Calorimeter Physical properties measurement system (PPMS)

15 Contact: Prof. Dr. Ján DUSZA, DrSc Member of the Presidium of Slovak Academy of Sciences Institute of Materials Research of SAS Watsonova Košice Slovakia Phone: Mobil: Fax:

RESEARCH IN NANOTECHNOLOGY & NANOMATERIALS

RESEARCH IN NANOTECHNOLOGY & NANOMATERIALS RESEARCH IN NANOTECHNOLOGY & NANOMATERIALS IN KOŠICE INSTITUTE OF MATERIALS RESEARCH OF SAS KOŠICE, SLOVAKIA Jan Dusza jdusza@imr.saske.sk PROJECT-GERERATION WORKSHOP 9.2.2007, IMR SAS,, Watsonova 47,

More information

Institute of Materials Research Slovak Academy of Sciences and Vienna University of Technology Austria. organise International Conference

Institute of Materials Research Slovak Academy of Sciences and Vienna University of Technology Austria. organise International Conference Powder Metallurgy Progress, Vol.11 (2011), No 1-2 Institute of Materials Research Slovak Academy of Sciences and Vienna University of Technology Austria organise International Conference Deformation and

More information

APPLICATION OF FRACTOGRAPHY IN ASSESSMENT OF COMPOSITE LAYERS

APPLICATION OF FRACTOGRAPHY IN ASSESSMENT OF COMPOSITE LAYERS Acta Metall. Slovaca Conf. 219 APPLICATION OF FRACTOGRAPHY IN ASSESSMENT OF COMPOSITE LAYERS Dagmar Jakubéczyová 1)*, Marek Kočík 1), Pavol Hvizdoš 1) 1) Institute of Materials Research, Slovak Academy

More information

FEM of cracking during nanoindentation and scratch testing in the coated systems František Lofaj

FEM of cracking during nanoindentation and scratch testing in the coated systems František Lofaj FEM of cracking during nanoindentation and scratch testing in the coated systems František Lofaj Institute of Materials Research of the Slovak Academy of Sciences Košice, Slovakia Outline Introduction

More information

Final Year Project Proposal 1

Final Year Project Proposal 1 Final Year Project Proposal 1 Mechanical testing for high temperature polymers Mr Eric Phua Jian Rong (JRPhua@ntu.edu.sg) In offshore subsea drilling, different types of microelectronics devices and sensors

More information

Warsaw University of Technology Faculty of Materials Science and Engineering Woloska 141, Warsaw, Poland

Warsaw University of Technology Faculty of Materials Science and Engineering Woloska 141, Warsaw, Poland Warsaw University of Technology Faculty of Materials Science and Engineering Woloska 141, 02-507 Warsaw, Poland Michał Gloc*, Krystyna Lublińska, Krzysztof Rożniatowski, Krzysztof Jan Kurzydłowski *michalgloc@poczta.fm

More information

47 Mangeron Boulevard, Iaşi, Romania Tel Fax:

47 Mangeron Boulevard, Iaşi, Romania Tel Fax: The National Institute of Research and Development for Technical Physics (NIRDTP) of Iaşi belongs to the network of national institutes coordinated by the Ministry of National Education. The mission of

More information

Advanced materials The study of preparation conditions of soft magnetic composites on their magnetic properties. Supervisor: Study form: Annotation:

Advanced materials The study of preparation conditions of soft magnetic composites on their magnetic properties. Supervisor: Study form: Annotation: Advanced materials The study of preparation conditions of soft magnetic composites on their magnetic properties. Supervisor: Prof. RNDr. Peter Kollár, DrSc. Annotation: The study is oriented on investigation

More information

Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the

Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the Current Materials Accomplishments till date As the structural

More information

PHS6317 NANO-ENGINEERING OF THIN FILMS

PHS6317 NANO-ENGINEERING OF THIN FILMS PHS6317 NANO-ENGINEERING OF THIN FILMS Ludvik Martinu, ing., PhD Professor Chairholder: NSERC Multisectorial Industrial Research Chair in Coatings and Surface Engineering ludvik.martinu@polymtl.ca www.polymtl.ca/larfis

More information

Scratch Testers. Coating Adhesion, Scratch and Mar Resistance. ::: World Leader in Scratch Testing

Scratch Testers. Coating Adhesion, Scratch and Mar Resistance. ::: World Leader in Scratch Testing Scratch Testers Coating Adhesion, Scratch and Mar Resistance ::: World Leader in Scratch Testing Anton Paar Scratch Testers Anton Paar is the world leader in the field of material characterization of surfaces,

More information

NCERCAMP at the University of Akron. Major Equipment

NCERCAMP at the University of Akron. Major Equipment Tescan LYRA-3 Model XMU FIB-FESEM Scanning Electron Microscope (SEM) with Focused Ion Beam (FIB) capability and a Transmission Electron Microscope (STEM) detector. The FIB can perform cross sectioning

More information

G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (G.V. Kurdyumov IMP of NASU), Kyiv

G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (G.V. Kurdyumov IMP of NASU), Kyiv G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (G.V. Kurdyumov IMP of NASU), Kyiv Technical Area: Material Sciences Keywords: metal physics General Information

More information

Enhanced Response from Engineered Nano Treated Peizofilm

Enhanced Response from Engineered Nano Treated Peizofilm Enhanced Response from Engineered Nano Treated Peizofilm By Sai Narayan Sundar Advisor Dr J.P Sharma Dept. of Mechanical Engineering University of Mississippi i: flow of current due to piezo deformation

More information

Manufacturing Technologies University of Rome Tor Vergata

Manufacturing Technologies University of Rome Tor Vergata Manufacturing Tech (6 cr) + Metallurgy (3 cr) Initial introduction (1 week) Timetable 6 credits (54-60 h) End of the course: 28 giugno Type of examination Written test Oral test (mandatory) Average of

More information

Large-scale Spinning of Silver Nanofibers as Flexible and. Reliable Conductors

Large-scale Spinning of Silver Nanofibers as Flexible and. Reliable Conductors Supporting Information For Large-scale Spinning of Silver Nanofibers as Flexible and Reliable Conductors Ya Huang 1, Xiaopeng Bai 1, Ming Zhou 2, Suiyang Liao 1, Zongfu Yu 2, Yaping Wang 3 and Hui Wu 1,*

More information

2 9 & 3 0 J U N E, P A R I S - F R A N C E

2 9 & 3 0 J U N E, P A R I S - F R A N C E 2 9 & 3 0 J U N E, 2 0 1 4 P A R I S - F R A N C E HIGH-TECH MATERIALS FOR TOMORROW'S LARGE SCALE INDUSTRIAL DEVELOPMENTS: ENERGY GENERATION AND TRANSPORT, ADVANCED STRUCTURAL DESIGNS, AND DATA PROCESSING

More information

Bearings for Extreme Special Environments (6) Present State and Future Trend of Koyo EXSEV Bearing

Bearings for Extreme Special Environments (6) Present State and Future Trend of Koyo EXSEV Bearing Bearings for Extreme Special Environments (6) Present State and Future Trend of Koyo EXSEV Bearing H. TAKEBAYASHI Outlines of Koyo EXSEV bearing series (bearings for extreme special environments) have

More information

NEBRASKA NANOSCALE FACILITY CHARACTERIZATION FACILITIES

NEBRASKA NANOSCALE FACILITY CHARACTERIZATION FACILITIES NEBRASKA NANOSCALE FACILITY CHARACTERIZATION FACILITIES Jeff Shield Department of Mechanical & Materials Engineering Nebraska Center for Materials and Nanoscience National Nanotechnology Coordinated Infrastructure

More information

Expertise on following materials: Thanks to the structure of CSNMT, the expertise covers nearly all engineering materials.

Expertise on following materials: Thanks to the structure of CSNMT, the expertise covers nearly all engineering materials. NAME: CZECH SOCIETY FOR NEW MATERIALS AND TECHNOLOGIES (CSNMT), PRAHA COUNTRY: CZECH REPUBLIC Profile : The Czech Society for New Materials and Technologies (CSNMT), founded in 1993, is a voluntary association

More information

Surface Layer Characterization of Atomized Magnesium for use in Powder Metallurgy Products Paul Burke and Georges J. Kipouros

Surface Layer Characterization of Atomized Magnesium for use in Powder Metallurgy Products Paul Burke and Georges J. Kipouros Surface Layer Characterization of Atomized Magnesium for use in Powder Metallurgy Products Paul Burke and Georges J. Kipouros Materials Engineering Program Process Engineering and Applied Science Dalhousie

More information

Italian EU Presidency & 130th anniversary of the Terni steelworks' foundation. CCMI Bureau extraordinary meeting Castel Romano 9.10.

Italian EU Presidency & 130th anniversary of the Terni steelworks' foundation. CCMI Bureau extraordinary meeting Castel Romano 9.10. Italian EU Presidency & 130th anniversary of the Terni steelworks' foundation CCMI Bureau extraordinary meeting Castel Romano 9.10.2014 Stage in our 50 year history Stage in our 50 year history RINA acquires

More information

CHEMICAL DEPTH PROFILING OF TOOL MATERIALS USING GLOW DISCHARGE OPTICAL EMISSION SPECTROSCOPY (GD-OES)

CHEMICAL DEPTH PROFILING OF TOOL MATERIALS USING GLOW DISCHARGE OPTICAL EMISSION SPECTROSCOPY (GD-OES) CHEMICAL DEPTH PROFILING OF TOOL MATERIALS USING GLOW DISCHARGE OPTICAL EMISSION SPECTROSCOPY (GD-OES) T. Björk Swedish Institute for Metals Researc Drottning Kristinas väg 48 114 28 Stockholm Sweden Abstract

More information

2.3.3 Plasma Sulphurizing Restriction of Plasma Nitriding Development of Plasma Nitriding in China References...

2.3.3 Plasma Sulphurizing Restriction of Plasma Nitriding Development of Plasma Nitriding in China References... Contents 1 Introduction... 1 1.1 Engineering Materials and Its Surface.... 1 1.2 Surface Engineering and Its Classification... 2 1.2.1 Concept of Surface Engineering... 2 1.2.2 Surface Hardening Technology...

More information

Evaluation of Mechanical Properties of Hard Coatings

Evaluation of Mechanical Properties of Hard Coatings Evaluation of Mechanical Properties of Hard Coatings Comprehensive mechanical testing of two coated metal samples was performed on the UNMT- 1. The tests clearly distinguished brittle and ductile samples,

More information

ATRONA Test Labs, Inc Zenith Parkway, Loves Park, IL Atif Ott Odeh Phone:

ATRONA Test Labs, Inc Zenith Parkway, Loves Park, IL Atif Ott Odeh Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid to: March 29, 2017 Certificate Number: AT-1119

More information

Nanoindentation induced deformation anisotropy in WC, β-si3n4 and ZrB2 crystals

Nanoindentation induced deformation anisotropy in WC, β-si3n4 and ZrB2 crystals Engineering Conferences International ECI Digital Archives Nanomechanical Testing in Materials Research and Development V Proceedings Fall 10-8-2015 Nanoindentation induced deformation anisotropy in WC,

More information

Analysis of improvements in technological properties of WC-Co tool materials fabricated by spark plasma sintering

Analysis of improvements in technological properties of WC-Co tool materials fabricated by spark plasma sintering of Achievements in Materials and Manufacturing Engineering International Scientific Journal published monthly by the World Academy of Materials and Manufacturing Engineering Analysis of improvements in

More information

Nanyang Technological University School of Materials Science & Engineering

Nanyang Technological University School of Materials Science & Engineering Final Year Project Proposal 1 3D Assembly of Nano/Micro Zirconia Particles for Enhanced Energy Damping Capacity Dr Du Zehui (duzehui@ntu.edu.sg) To develop the best possible method to assemble micro/nano-scale

More information

CERECO. Specialized knowledge in ceramic processing. Innovative Ceramic products

CERECO. Specialized knowledge in ceramic processing. Innovative Ceramic products Specialized knowledge in ceramic processing Innovative Ceramic products CERAMICS AND REFRACTORIES TECHNOLOGICAL DEVELOPMENT COMPANY Who we are CERECO S.A. is a technological company, located at the Region

More information

ANSI-ASQ National Accreditation Board/ACLASS

ANSI-ASQ National Accreditation Board/ACLASS ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid

More information

NATURAL ORGANIC-INORGANIC MATERIAL UTILIZED AS A FILLER IN POLYMER SYSTEMS. Dora KROISOVÁ, Kinga ADACH, Mateusz FIJALKOWSKI

NATURAL ORGANIC-INORGANIC MATERIAL UTILIZED AS A FILLER IN POLYMER SYSTEMS. Dora KROISOVÁ, Kinga ADACH, Mateusz FIJALKOWSKI NATURAL ORGANIC-INORGANIC MATERIAL UTILIZED AS A FILLER IN POLYMER SYSTEMS Dora KROISOVÁ, Kinga ADACH, Mateusz FIJALKOWSKI Technical University of Liberec, Studentska 2, Liberec, Czech Republic dora.kroisova@tul.cz

More information

Syllabus: Different levels of structure in materials. Relation among material processing, structure, properties, and performance

Syllabus: Different levels of structure in materials. Relation among material processing, structure, properties, and performance Syllabus: Types of materials Properties of materials Different levels of structure in materials Relation among material processing, structure, properties, and performance The main objective is to understand

More information

Surface engineering for new industrial applications - bio application

Surface engineering for new industrial applications - bio application Surface engineering for new industrial applications - bio application Dr. Yangchun Dong Bsc. Msc. PhD Tel.: +420541143323 Mobile: +420776395588 30/10/2013, Brno Introduction 1. A few questions to answer:

More information

FRACTURE CHARACTERISTICS OF THE COMPOSITE MATERIAL BASED ON Fe THERMOSETTING RESIN PREPARED BY POWDER METALLURGY

FRACTURE CHARACTERISTICS OF THE COMPOSITE MATERIAL BASED ON Fe THERMOSETTING RESIN PREPARED BY POWDER METALLURGY Powder Metallurgy Progress, Vol.9 (2009), No 4 212 FRACTURE CHARACTERISTICS OF THE COMPOSITE MATERIAL BASED ON Fe THERMOSETTING RESIN PREPARED BY POWDER METALLURGY M. Fáberová, R. Bureš, E. Dudrová Abstract

More information

Biomaterials in Medical device design

Biomaterials in Medical device design Biomaterials in Medical device design 1 Dr Joseph Buhagiar B. E n g ( H o n s. ) P h D ( B h a m ) D e p a r t m e n t o f M e t a l l u r g y a n d M a t e r i a l s E n g i n e e r i n g U n i v e r

More information

Fabrication of 316L Stainless Steel Foams via Powder Metallurgy Technique

Fabrication of 316L Stainless Steel Foams via Powder Metallurgy Technique Fabrication of 316L Stainless Steel Foams via Powder Metallurgy Technique Z. Abdullah 1, a, S. Ahmad 2, b, M. F. M. Rafter 3, c, N. S. A. Manaf 4,d 1, 2, 3, 4 Faculty of Mechanical &Manufacturing Engineering,

More information

Supporting Information

Supporting Information Supporting Information Earth Abundant Fe/Mn-Based Layered Oxide Interconnected Nanowires for Advanced K-Ion Full Batteries Xuanpeng Wang, Xiaoming Xu, Chaojiang Niu*, Jiashen Meng, Meng Huang, Xiong Liu,

More information

MODEL Plasma Cleaner. Simultaneously cleans specimen and specimen holder. Cleans highly contaminated specimens in 2 minutes or less

MODEL Plasma Cleaner. Simultaneously cleans specimen and specimen holder. Cleans highly contaminated specimens in 2 minutes or less MODEL 1020 Plasma Cleaner Cleans specimens immediately before they are inserted into the electron microscope; removes existing carbonaceous debris from the specimen and prevents contamination from occurring

More information

LOW FRICTION LAYERS AND THEIR PROPERTIES. Martina Sosnová

LOW FRICTION LAYERS AND THEIR PROPERTIES. Martina Sosnová SOUTĚŽNÍ PŘEHLÍDKA STUDENTSKÝCH A DOKTORSKÝCH PRACÍ FST 2004 LOW FRICTION LAYERS AND THEIR PROPERTIES Martina Sosnová 1. ABSTRACT The contribution deals with the analysis of low- friction thin layers.

More information

Advanced Materials & Structures (AMS)

Advanced Materials & Structures (AMS) Competences Advanced Materials & Structures (AMS) Main axes of research Material design: Innovative materials Custom made materials (surface or bulk treatment) Improvement of material performance via bulk

More information

QUANTITATIVE MICROSTRUCTURE ANALYSIS OF DISPERSION STRENGTHENED Al-Al 4 C 3 MATERIAL BY EBSD TECHNIQUE

QUANTITATIVE MICROSTRUCTURE ANALYSIS OF DISPERSION STRENGTHENED Al-Al 4 C 3 MATERIAL BY EBSD TECHNIQUE Acta Metallurgica Slovaca, Vol. 16, 2010, No.2, p. 97-101 97 QUANTITATIVE MICROSTRUCTURE ANALYSIS OF DISPERSION STRENGTHENED Al-Al 4 C 3 MATERIAL BY EBSD TECHNIQUE M. Varchola, M. Besterci, K. Sülleiová

More information

Tribology Advanced Scratch Testing Applications -Suresh Kuiry, Ph.D.

Tribology Advanced Scratch Testing Applications -Suresh Kuiry, Ph.D. Tribology 101 - Advanced Scratch Testing Applications -Suresh Kuiry, Ph.D. Introduction Scratch Test - Introduction Various Types of scratch tests Brief description of Bruker UMT- Scratch Test Module Deciding

More information

Tribological Properties of Hybrid Process DLC Coating against Magnesium Alloy

Tribological Properties of Hybrid Process DLC Coating against Magnesium Alloy Materials Transactions, Vol. 47, No. 4 (2006) pp. 1008 to 1012 Special Issue on Platform Science and Technology for Advanced Magnesium Alloys, III #2006 The Japan Institute of Metals Tribological Properties

More information

Metallic materials for extreme environments with nanostructural surface layer (MENSUR)

Metallic materials for extreme environments with nanostructural surface layer (MENSUR) For submission to EU s 7 th framework programme Metallic materials for extreme environments with nanostructural surface layer (MENSUR) Programme objective: NMP-2007-4.2.5-1 Novel materials tailored for

More information

PROCESS CONTROL OF THERMAL BARRIER COATING SYSTEM BY CURRENT VARIANT CHANGES TO ALTER THE MICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS

PROCESS CONTROL OF THERMAL BARRIER COATING SYSTEM BY CURRENT VARIANT CHANGES TO ALTER THE MICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS Volume XI, Issue I, June 2015, Page 129 135 PROCESS CONTROL OF THERMAL BARRIER COATING SYSTEM BY CURRENT VARIANT CHANGES TO ALTER THE MICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS A. Imran 1, S. Alam

More information

Specimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process

Specimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process Specimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process by Kozue Yabusaki * and Hirokazu Sasaki * In recent years the FIB technique has been widely used for specimen

More information

FAILURE MECHANISM OF Cu-Al 2 O 3 MICRO AND NANOMATERIALS OBSERVED BY "IN-SITU TENSILE TEST IN SEM"

FAILURE MECHANISM OF Cu-Al 2 O 3 MICRO AND NANOMATERIALS OBSERVED BY IN-SITU TENSILE TEST IN SEM Powder Metallurgy Progress, Vol.14 (2014), No 4 228 FAILURE MECHANISM OF Cu-Al 2 O 3 MICRO AND NANOMATERIALS OBSERVED BY "IN-SITU TENSILE TEST IN SEM" M. Besterci, K. Sülleiová, B. Ballóková, O. Velgosová,

More information

DOWNLOAD OR READ : TRIBOLOGICAL INSIGHTS AND PERFORMANCE CHARACTERISTICS OF MODERN ENGINE LUBRICANTS PDF EBOOK EPUB MOBI

DOWNLOAD OR READ : TRIBOLOGICAL INSIGHTS AND PERFORMANCE CHARACTERISTICS OF MODERN ENGINE LUBRICANTS PDF EBOOK EPUB MOBI DOWNLOAD OR READ : TRIBOLOGICAL INSIGHTS AND PERFORMANCE CHARACTERISTICS OF MODERN ENGINE LUBRICANTS PDF EBOOK EPUB MOBI Page 1 Page 2 tribological insights and performance pdf A SPECIAL ISSUE A Special

More information

NINT Supporting Innovative Ideas through Nanotechnology

NINT Supporting Innovative Ideas through Nanotechnology NINT Supporting Innovative Ideas through Nanotechnology (Capabilities and Expertise) Dr. Marianna Kulka, PhD Group Leader, NINT National Research Council Marianna.kulka@nrc.ca National Institute for Nanotechnology

More information

Pilot processing line for manufacturing articles from bulk nanostructured ceramics/composites

Pilot processing line for manufacturing articles from bulk nanostructured ceramics/composites Pilot processing line for manufacturing articles from bulk nanostructured ceramics/composites 1. Analysis of nanopowders 2. Compacting of dry nano-, polydisperse powders 3. Analysis of green compacts 4.

More information

F A C U L T Y O F M E T A L L U R G Y A N D M A T E R I A L S S C I E N C E

F A C U L T Y O F M E T A L L U R G Y A N D M A T E R I A L S S C I E N C E F A C U L T Y O F M E T A L L U R G Y A N D M A T E R I A L S S C I E N C E S P E C I A L T I E S : 1 1 ENERGY AND ECOLOGY EFFICIENCY IN METALLURGY METALLURGY OF FERROUS METALS METALLURGICAL NON-FERROUS

More information

ITO nanoparticles for Transparent Conductor Coatings

ITO nanoparticles for Transparent Conductor Coatings ITO nanoparticles for Transparent Conductor Coatings Nowadays, a wide range of high technology applications such as smartphones, tablets, solar panels or touchscreens uses thin conductive oxides based

More information

Techniques to Improve Coating Adhesion of Superhard Coatings

Techniques to Improve Coating Adhesion of Superhard Coatings Journal of Metals, Materials and Minerals. Vol.16 No.2 pp.19-23, 2006 Techniques to Improve Coating Adhesion of Superhard Coatings Nurot PANICH 1, Panyawat WANGYAO 1*, Nuntapol VATTANAPRATEEP 2 and Sun

More information

Supplementary. N. Akhtar a,b, M.Y. Emran a, M. A. Shenashen a,, T. Osaka b, A. Faheem c, T. Homma b, H. Kawarada. , S. A.

Supplementary. N. Akhtar a,b, M.Y. Emran a, M. A. Shenashen a,, T. Osaka b, A. Faheem c, T. Homma b, H. Kawarada. , S. A. Electronic Supplementary Material (ESI) for Journal of Materials Chemistry B. This journal is The Royal Society of Chemistry 2017 Supplementary Fabrication of Photo-electrochemical biosensor for ultrasensitive

More information

Jānis Grabis. Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing

Jānis Grabis. Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing Jānis Grabis Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing Outline Introduction nanoparticles, their preparation methods Experimental synthesis of multicomponent

More information

Specimen configuration

Specimen configuration APPLICATIONNOTE Model 1040 NanoMill TEM specimen preparation system Specimen configuration Preparing focused ion beam (FIB) milled specimens for submission to Fischione Instruments. The Model 1040 NanoMill

More information

SURFACE TREATMENT OF SONOTRODE MATERIAL AW 7075

SURFACE TREATMENT OF SONOTRODE MATERIAL AW 7075 SURFACE TREATMENT OF SONOTRODE MATERIAL AW 7075 EMMER Štefan 1, BAKSA Peter 2, KOVÁČIK Jaroslav 34 Keywords: Electro spark deposition, substrate AW 7075, metal-ceramic functional layers, micro hardness,

More information

Formation of High-quality Aluminum Oxide under Ion Beam Irradiation

Formation of High-quality Aluminum Oxide under Ion Beam Irradiation 15th International School-Conference New materials Materials of innovative energy: development, characterization methods and application Volume 2018 Conference Paper Formation of High-quality Aluminum

More information

EMS MICROSCOPY ACADEMY PHARMACEUTICAL MICROSCOPY WORKSHOP

EMS MICROSCOPY ACADEMY PHARMACEUTICAL MICROSCOPY WORKSHOP Examples of the Microscopy of Pharmaceuticals PLM image of anthroquinone cooled after thermal microscopy. Crossed polars with lambda waveplate. Uniaxial interference pattern used to determine optical crystallographic

More information

Gridless end-hall. Ion Sources. For Ion Assisted Thin Film Deposition & Substrate Cleaning

Gridless end-hall. Ion Sources. For Ion Assisted Thin Film Deposition & Substrate Cleaning Gridless end-hall Ion Sources For Ion Assisted Thin Film Deposition & Substrate Cleaning End-Hall Ion Sources mark I Ion Source The Mark I End-Hall is ideal for small research and development and pilot

More information

TRIBOLOGICAL PROPERTIES OF TiB x AND WC/C COATINGS

TRIBOLOGICAL PROPERTIES OF TiB x AND WC/C COATINGS Original papers TRIBOLOGICAL PROPERTIES OF TiB x AND WC/C COATINGS # FRANTIŠEK LOFAJ 1,2, MARIAN MIKULA 3,4, BRANISLAV GRANČIČ 4, GREGORZ CEMPURA 5, PETER HORŇÁK 1, PETER KÚŠ 4, DANIEL KOTTFER 6 1 Institute

More information

Status of the DESY NanoLab Project

Status of the DESY NanoLab Project Status of the DESY NanoLab Project Ralf Röhlsberger DESY Wissenschaftlicher Ausschuss DESY 7 June 2011 Mission of the DESY NanoLab To accomodate the growing need for structural probes on the nanoscale,

More information

Research on the High Strength Glass Ceramics/Mullite Ceramics Composites

Research on the High Strength Glass Ceramics/Mullite Ceramics Composites New Journal of Glass and Ceramics, 2011, 1, 53-57 doi:10.4236/njgc.2011.12009 Published Online July 2011 (http://www.scirp.org/journal/njgc) 53 Research on the High Strength Glass Ceramics/Mullite Ceramics

More information

STRUCTURAL CHANGES OF PVD COATED CR-NI STEEL METHOD AFTER HEAT LOAD

STRUCTURAL CHANGES OF PVD COATED CR-NI STEEL METHOD AFTER HEAT LOAD STRUCTURAL CHANGES OF PVD COATED CR-NI STEEL METHOD AFTER HEAT LOAD Stanislav KRUM 1), Jakub HORNÍK 1), David TONDL 1), Františka PEŠLOVÁ 2), Maxim PUCHNIN 1), Evgenyi ANISIMOV 1) 1) Czech Technical University

More information

INTRODUCTION. Think HSS

INTRODUCTION. Think HSS INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM

More information

A Basic Introduction to Thin-Film Coatings. From the Experts at VaporTech

A Basic Introduction to Thin-Film Coatings. From the Experts at VaporTech A Basic Introduction to Thin-Film Coatings From the Experts at VaporTech What are thin-film coatings? 2018 Vapor Technologies, Inc. All rights reserved. Thin-film coatings Physical or Chemical Vapor Deposition

More information

Synthesis of diamond-like carbon films with super-low friction and wear properties

Synthesis of diamond-like carbon films with super-low friction and wear properties Synthesis of diamond-like carbon films with super-low friction and wear properties MSE 676 All Things Carbon / 09-29-2009 A. Erdemir, O.L. Eryilmaz, and G. Fenske J. Vac. Sci. Technol. A 18(4), Jul/Aug

More information

Overview: College of Polymer Science and Polymer Engineering

Overview: College of Polymer Science and Polymer Engineering Overview: College of Polymer Science and Polymer Engineering Paula Watt, Ph.D. Director of Outreach College of Polymer Science and Polymer Engineering Polymers and Composites are ideal for lightweighting

More information

Preparation and Investigation of Cu-Co- Al2O3 Nanocrystalline Metal Matrix Composites

Preparation and Investigation of Cu-Co- Al2O3 Nanocrystalline Metal Matrix Composites Preparation and Investigation of Cu-Co- Al2O3 Nanocrystalline Metal Matrix Composites R.Venkatesh Research Scholar Sathyabama University, Chennai TamilNadu, India S.Kumaraguru U.G Student Department of

More information

AVANTIN and BERUCOOL Coolant Lubricants

AVANTIN and BERUCOOL Coolant Lubricants AVANTIN and BERUCOOL Coolant Lubricants AVANTIN and BERUCOOL Coolant Lubricants are all tailored to particular requirements by their special composition. The modern system structure of our water-miscible

More information

TRIBOLOGICAL PROPERTIES OF SOLID LUBRICANT NANOCOMPOSITE COATINGS OBTAINED BY MAGNETRON SPUTTERED OF MOS 2 /METAL (TI, MO) NANOPARTICLES

TRIBOLOGICAL PROPERTIES OF SOLID LUBRICANT NANOCOMPOSITE COATINGS OBTAINED BY MAGNETRON SPUTTERED OF MOS 2 /METAL (TI, MO) NANOPARTICLES THE PUBLISHING HOUSE PROCEEDINGS OF THE ROMANIAN ACADEMY, Series A, OF THE ROMANIAN ACADEMY Volume 8, Number 3/2007, pp. 000-000 TRIBOLOGICAL PROPERTIES OF SOLID LUBRICANT NANOCOMPOSITE COATINGS OBTAINED

More information

PIM Technology. a powder technology for complex small engineering parts

PIM Technology. a powder technology for complex small engineering parts a powder technology for complex small engineering parts Powder Injection Moulding () metals (MIM) ceramics (CIM) cemented carbides (CCIM) is a new process for material shaping that combines the flexibility

More information

FRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST OPTICAL COATINGS

FRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST OPTICAL COATINGS FRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST OPTICAL COATINGS OPTICAL FUNCTIONAL COATINGS AT THE FRAUNHOFER IST The development of optical functional films and the related coating processes

More information

Tribological and Catalytic Coatings

Tribological and Catalytic Coatings Tribological and Catalytic Coatings Objectives: Study of mechanical properties of nanocomposite and nanolaminate thin films deposited by pulsed laser deposition (PLD): Nitride-based coatings (AlN, TiN,

More information

INTEGRATED TRIBO-SPM FOR NANO-TRIBOLOGY

INTEGRATED TRIBO-SPM FOR NANO-TRIBOLOGY INTEGRATED TRIBO-SPM FOR NANO-TRIBOLOGY N. GITIS, A. DAUGELA, J. XIAO Center for Tribology Inc., 1715 Dell Ave., Campbell, CA 95008, USA, e-mail: info@cetr.com SUMMARY A novel quantitative nano+micro-tribometer

More information

The Study of SEM Examination of Crept Ceramic Samples Prepared by Cross Polishing Method

The Study of SEM Examination of Crept Ceramic Samples Prepared by Cross Polishing Method The Study of SEM Examination of Crept Ceramic Samples Prepared by Cross Polishing Method Alper Uludag Faculty of Aeronautics and Astronautics Anadolu University Eskisehir, Turkey alperuludag@anadolu.edu.tr

More information

772. A study of selected properties in high dispersion padding welds produced in machine elements

772. A study of selected properties in high dispersion padding welds produced in machine elements 772. A study of selected properties in high dispersion padding welds produced in machine elements Wojciech Napadłek 1, Agnieszka Laber 1, 2 1 Military University of Technology, Faculty of Mechanical Engineering

More information

NASF SURFACE TECHNOLOGY WHITE PAPERS 82 (2), 1-5 (November 2017)

NASF SURFACE TECHNOLOGY WHITE PAPERS 82 (2), 1-5 (November 2017) Can Electroplated Fe-C be an Environmentally Friendly Alternative to Hard Chromium and DLC Coatings? A Synopsis * of a Presentation given at SUR/FIN 2017 (Atlanta, Georgia) by Lars Plath Nielsen ** Tribology

More information

STRUCTURE AND TRIBOLOGICAL PROPERTIES OF Cu-Sn ALLOYS BASED ON MECHANICAL ACTIVATED POWDERS FORMED BY ELECTROCONTACT SINTERING

STRUCTURE AND TRIBOLOGICAL PROPERTIES OF Cu-Sn ALLOYS BASED ON MECHANICAL ACTIVATED POWDERS FORMED BY ELECTROCONTACT SINTERING STRUCTURE AND TRIBOLOGICAL PROPERTIES OF Cu-Sn ALLOYS BASED ON MECHANICAL ACTIVATED POWDERS FORMED BY ELECTROCONTACT SINTERING Vityaz 1 P. A., Kovaliova 1 S. A., Zornik 1 V. I., Kukareko 1 V.A., Grigorieva

More information

Study on the tribological properties of titanium alloy modified by surface. texture composite DLC film. Zheng Lili, Zhang Yonghai, Chen Wengang*

Study on the tribological properties of titanium alloy modified by surface. texture composite DLC film. Zheng Lili, Zhang Yonghai, Chen Wengang* 4th International Conference on Sensors, Measurement and Intelligent Materials (ICSMIM 215) Study on the tribological properties of titanium alloy modified by surface texture composite DLC film Zheng Lili,

More information

6.1 Summary. Summary and Scope for Further Study

6.1 Summary. Summary and Scope for Further Study Summary and scope for further study Summary and Scope for Further Study 6.1 Summary Detecting gases and determining their composition has constantly been on the increase in recent years. The demand for

More information

Advances in Military Technology Vol. 6, No. 1, June Plasma Nitriding of Bored Barrels

Advances in Military Technology Vol. 6, No. 1, June Plasma Nitriding of Bored Barrels AiMT Advances in Military Technology Vol. 6, No. 1, June 2011 Plasma Nitriding of Bored Barrels Z. Pokorný *, J. Kadlec, V. Hrubý, Z. Joska, D. Q. Tran and D. Beran Department of Mechanical Engineering,

More information

Application Note #1007 All-Inclusive Scratch Testing of Coatings and Thin Films Using Bruker's Universal Test System

Application Note #1007 All-Inclusive Scratch Testing of Coatings and Thin Films Using Bruker's Universal Test System Scratch with ECR Scratch with E UMT TriboLab pplication Note #1007 ll-inclusive Scratch Testing of Coatings and Thin Films Using ruker's Universal Test System Coatings and thin films are being used increasingly

More information

STRUCTURE AND MAGNETIC PROPERTIES OF CoFeB ALLOYS PREPARED BY BALL MILLING

STRUCTURE AND MAGNETIC PROPERTIES OF CoFeB ALLOYS PREPARED BY BALL MILLING STRUCTURE AND MAGNETIC PROPERTIES OF CoFeB ALLOYS PREPARED BY BALL MILLING * Jozef BEDNARČÍK, ** Jozef KOVÁČ, ** Viktor KAVEČANSKÝ, * Peter KOLLÁR, *** Krzysztof POLANSKI, **** Jana KVASNICOVÁ * Department

More information

Ceramic materials with submicron structure based on nanopowders

Ceramic materials with submicron structure based on nanopowders Ceramic materials with submicron structure based on nanopowders Uwe Reichel, Fraunhofer Institute for Ceramic Technologies and Systems IKTS Institutsteil Hermsdorf, D-07629 Hermsdorf, Germany Nanophotonics

More information

Micro and Nano Technology (MNT) Measurement Club. 1-day meeting. Thin Films and Coatings

Micro and Nano Technology (MNT) Measurement Club. 1-day meeting. Thin Films and Coatings Micro and Nano Technology (MNT) Measurement Club 1-day meeting Thin Films and Coatings Venue: National Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW Date: Wednesday 5 July 2006 Overview

More information

Influence of bowl shaped substrate holder on growth of polymeric DLC film in a microwave plasma CVD reactor

Influence of bowl shaped substrate holder on growth of polymeric DLC film in a microwave plasma CVD reactor Bull. Mater. Sci., Vol. 35, No. 7, December 2012, pp. 1117 1121. c Indian Academy of Sciences. Influence of bowl shaped substrate holder on growth of polymeric DLC film in a microwave plasma CVD reactor

More information

Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions

Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions Lateral epitaxial growth of two-dimensional layered semiconductor heterojunctions Xidong Duan, Chen Wang, Jonathan Shaw, Rui Cheng, Yu Chen, Honglai Li, Xueping Wu, Ying Tang, Qinling Zhang, Anlian Pan,

More information

4-in-1 Nano Machine & Technology

4-in-1 Nano Machine & Technology 4-in-1 Nano Machine & Technology Machine combines 1) CVD, 2) PVD, 3) ion saturation and 4) ion-treatment processes in one (1) production cycle in one machine that produces functional coatings used to harden

More information

STUDY OF DIAMOND-LIKE COATING DEPOSITED ON THE SURFACE OF Nd-Fe-B-TYPE SINTERED MAGNETS

STUDY OF DIAMOND-LIKE COATING DEPOSITED ON THE SURFACE OF Nd-Fe-B-TYPE SINTERED MAGNETS STUDY OF DIAMOND-LIKE COATING DEPOSITED ON THE SURFACE OF Nd-Fe-B-TYPE SINTERED MAGNETS Natalia KOLCHUGINA 1, Aleksandr LUKIN 2, Gennadii BURKHANOV 1, Georgii SPRYGIN 1,, Miroslav KURSA 3, Katerina SKOTNICOVA

More information

Microstructural Studies of Al Al2O3 Nanocomposites Prepared by Powder

Microstructural Studies of Al Al2O3 Nanocomposites Prepared by Powder Microstructural Studies of Al Al2O3 Nanocomposites Prepared by Powder Metallurgy Route K. Dash*, D.Chaira and B.C. Ray Department of Metallurgical & Materials Engineering National Institute of Technology

More information

Supplementary information Synthesis of nanostructured chitin-hematite materials under extreme biomimetic conditions

Supplementary information Synthesis of nanostructured chitin-hematite materials under extreme biomimetic conditions Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2014 Supplementary information Synthesis of nanostructured chitin-hematite materials under extreme

More information

ELECTRICAL CONTACTS FUNDAMENTALS, APPLICATIONS AND TECHNOLOGY. MlLENKO BRAUNOVIC MB Interface, Scientific Consultants Montreal, Quebec, Canada

ELECTRICAL CONTACTS FUNDAMENTALS, APPLICATIONS AND TECHNOLOGY. MlLENKO BRAUNOVIC MB Interface, Scientific Consultants Montreal, Quebec, Canada ELECTRICAL CONTACTS FUNDAMENTALS, APPLICATIONS AND TECHNOLOGY MlLENKO BRAUNOVIC MB Interface, Scientific Consultants Montreal, Quebec, Canada VALERY V. KONCHITS National Academy of Sciences of Belarus

More information

STRUCTURE EVOLUTION OF AlCr5.5Fe2Ti1 ALLOY DURING ITS COMPACTIZATION

STRUCTURE EVOLUTION OF AlCr5.5Fe2Ti1 ALLOY DURING ITS COMPACTIZATION STRUCTURE EVOLUTION OF AlCr5.5Fe2Ti1 ALLOY DURING ITS COMPACTIZATION Alena MICHALCOVÁ a,b, Dalibor VOJTĚCH a, Pavel NOVÁK a, Jan DRAHOKOUPIL c, Kamil KOLAŘÍK d a Institute of Chemical Technology, Prague,

More information

D e p artment of Metallurgical & Materials E n g i n eering P l a cement B r ochure

D e p artment of Metallurgical & Materials E n g i n eering P l a cement B r ochure D e p artment of Metallurgical & Materials E n g i n eering P l a cement B r ochure 2 0 1 8-1 9 I n d i a n I n s t i t u t e o f Te c h n o l o g y P a t n a भ र त य ग क स थ न प ट न Address: Training

More information

Australian Journal of Basic and Applied Sciences. Utilization of Oxygen Plasma For Plasma Ashing and Etching Process

Australian Journal of Basic and Applied Sciences. Utilization of Oxygen Plasma For Plasma Ashing and Etching Process AENSI Journals Australian Journal of Basic and Applied Sciences ISSN:1991-8178 Journal home page: www.ajbasweb.com Utilization of Oxygen Plasma For Plasma Ashing and Etching Process 1 Nereus Tugur Redationo,

More information

Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates

Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates Dr. Iván Fernández Martínez Indianapolis, May 10th, 2016 Diamond Like Carbon (DLC) Diamond-like

More information

Benchtop XRD diffractometer. MiniFlex. Analysis of materials by X-ray diffraction

Benchtop XRD diffractometer. MiniFlex. Analysis of materials by X-ray diffraction Benchtop XRD diffractometer MiniFlex Analysis of materials by X-ray diffraction More power More flexibility More results The new MiniFlex is available in two models. The MiniFlex 600 is the most powerful

More information

MiniFlex. Analysis of materials by X-ray diffraction. Benchtop XRD diffractometer

MiniFlex. Analysis of materials by X-ray diffraction. Benchtop XRD diffractometer MiniFlex Analysis of materials by X-ray diffraction Benchtop XRD diffractometer More power More flexibility More results The new MiniFlex is available in two models. The MiniFlex 600 is the most powerful

More information