APPC PDH/PP PROJECT 8 CATOFIN REACTORS - JUBAIL SAUDI ARABIA ENGINEERING, DESIGN AND INSTALLATION OF REFRACTORY LINING
|
|
- Kerry Farmer
- 6 years ago
- Views:
Transcription
1 ctive owners. names mentioned herein may be trademarks or trade names of their respec APPC PDH/PP PROJECT 8 CATOFIN REACTORS - JUBAIL SAUDI ARABIA ENGINEERING, DESIGN AND INSTALLATION OF REFRACTORY LINING Other pro oduct and company All rights pertaining to the reproduction, transformation and use of this document in any form or manner remain the exclusive property of CHIMNEY AND REFRACTORIES INTERNATIONAL SRL
2 SAMSUNG ENGINEERING CO. LTD. KOREA Awarded in October 2005 to CHIMNEY AND REFRACTORIES INTERNATIONAL SRL ITALY Purchase Order for ENGINEERING AND DESIGN MATERIALS SUPPLY SPECIAL SUPERVISORY SERVICES SITE INSTALLATION DRY OUT ASSISTANCE relevant to REFRACTORY LINING OF 8 NOS. CATOFIN REACTORS APPC PDH/PP PROJECT JUBAIL KINGDOM OF SAUDI ARABIA
3 ENGINEERING AND DESIGN Based on Licensor (ABB Lummus - USA) conceptual basic design, CHIMNEY AND REFRACTORIES INTERNATIONAL SRL s engineering and technical department was fully involved for the issue of GENERAL LAYOUT DRAWING DETAILS CONSTRUCTION DRAWINGS (cross sectional views, expansion joints, anchoring system, lining thickness) BILL OF QUANTITY LOADING DATA HEAT TRANSFER CALCULATIONS INSTALLATION PROCEDURES DRY OUT DIAGRAM
4 MATERIALS SUPPLY Based on Licensor (ABB Lummus - USA) technical specifications and approved vendor list and on SAMSUNG Requisition for Refractory Materials, CHIMNEY AND REFRACTORIES INTERNATIONAL SRL s project management and purchasing department decided, under single and full responsibility, to use: Sirma THERMAL CERAMICS SIRMA SPA CERAMICA INDUSTRIAL AVELLANEDA (ITALY FRANCE USA) (ITALY) (ARGENTINA) All insulating materials Super duty fireclay bricks and suspended shapes Super duty fireclay Perforated and T-support tiles
5 Sirma MATERIALS SUPPLY Super Duty Fireclay Bricks and Suspended Shapes Suspended Area Shapes Gravity Area Bricks Technical Specifications Minimum Requirements Min 40.0 % 1.5 % max 1.5 % max Min 42.0 % 1.4 % 0.9 % 2.4 g/cm^3 ± 10% 20 % max 40 MPa min -0.3 to +0.3 % > g/cm^3 12 % max 15.2 MPa 62.1 MPa 0.4 % 33~34 34
6 Sirma MATERIALS SUPPLY Super Duty Fireclay Bricks and Suspended Shapes Quality Control Inspection carried on all batched before the shipment PROPERTY TEST METHOD BULK DENSITY ASTM C-20 APPARENT POROSITY ASTM C-20 CHEMICAL ANALISYS ASTM C-573 COLD CRUSHING STRENGTH ASTM C-133 PERMANENT LINEAR CHANGE ASTM C-113 PRISM SPALLING TEST. ASTM C-38 MODULUS OF ROOM TEMP. ASTM C-133 MODULUS OF HIGH TEMP. ASTM C-583
7 MATERIALS SUPPLY Super Duty Fireclay Perforated and T-Support Tiles Technical Specifications Minimum Requirements Perforated Bricks and Support (Tiles) Bulk Density 2.4 g/cm^3 ± 10% Apparent Porosity 20 % Max. Pyrometric Cone Equivalent (PCE) >33 Reheat to +0.3 % Cold crushing strength 40 Mpa min. Room Temp. (Standard ASTM sample shape without slots) 12 Mpa min. 40 MPa min. Spalling 950, 45 mts, water 5 minutes Chemical Analysis-Calcined Basis > 30 cycles Silica (SiO2) Remainder ( 56.7) Alumina (Al203) Min 40.0 % Iron Oxide (Fe2O3) Lime (CaO) 1.5 % max. 0.3 % max. MgO - TiO2 - Soda (Na2O) + Potash (K2O) 1.5 % max.
8 MATERIALS SUPPLY Super Duty Fireclay Perforated and T-Support Tiles Quality Control Inspection carried on all batched before the shipment PROPERTY TEST METHOD BULK DENSITY ASTM C-20 APPARENT POROSITY ASTM C-20 CHEMICAL ANALISYS ASTM C-573 COLD CRUSHING STRENGTH ASTM C-133 PERMANENT LINEAR CHANGE ASTM C-113 PYROMETRIC CONE EQUIVALENT ASTM C-24 MODULUS OF ROOM TEMP. ASTM C-133 MODULUS OF HIGH TEMP. ASTM C-583 ROCKING TEST SIMULATED REACTOR LOADING TEST ABB specification ABB specification
9 PDH-PP CATOFIN REACTOR GENERAL LAYOUT
10 SITE INSTALLATION INLET NOZZLES A-B-C Nozzles Installation of internal steel liner Liner Application by trowel of plastic insulation
11 SITE INSTALLATION INLET NOZZLES A-B-C Nozzles Centering of steel liners Nozzles Final casting of insulation castable Nozzles Centering of steel liners
12 SITE INSTALLATION REACTOR BOTTOM PART Reactor Arches skew back detail Reactor Back lining Insulation board application Reactor Brick lining detail Reactor Refractory bricks installation
13 SITE INSTALLATION REACTOR BOTTOM PART (HEADS ARCHES) Reactor Arch type B design Reactor Arch type B Reactor Arch type B installation detail
14 SITE INSTALLATION REACTOR BOTTOM PART (GRID SUPPORT ARCHES) Reactor Arches type A installation Reactor Arches leveling Reactor Arches type A wedge & arch bricks details Reactor Arch type A design
15 SITE INSTALLATION REACTOR HEADS SUSPENDED TILES Reactor Heads design Reactor heads suspended tiles installation Reactor heads suspended tiles Reactor heads suspended tiles anchors system (hook + T bar)
16 SITE INSTALLATION REACTOR UPPER PART - SUSPENDED TILES Reactor suspended tiles anchor system Reactor suspended tiles installation
17 SITE INSTALLATION CATALYST SUPPORT GRID Reactor Catalyst Grid Support T-Tiles Reactor Catalyst Grid Support T-Tiles detail
18 SITE INSTALLATION CATALYST SUPPORT GRID AND VAPOR INLET BAFFLE Reactor Catalyst Grid Perforated Tiles installation Reactor Catalyst Grid Perforated Tiles Reactor Catalyst Grid Vapor Inlet Baffle
19 DRY-OUT ASSISTANCE 24 hours 7 days assistance and presence of CRInt supervisors during the dry-out period in order to monitor and to guarantee the respect of suggested heating-up and cooling-down curve. Visual inspection after the dry-out in order to check the status of refractory bricks walls and arches for any spalling, erosion, defects and loose. Visual inspection after the dry-out in order to check the status and the movement of expansion joints in nozzles liners and in reactors DRY-OUT DIAGRAM 25 C/h hold 36h 621 C 25 C/h 100% visual inspection after the dry-out of all T Support Tiles and Perforated Tiles in order to check any crack and break. TEMPERATURE (C) C/h hold 24h 25 C/h hold 24h 25 C/h 177 C hold 48h 316 C 150 C C After dry-out, installation of woven silica fabric and thermocouples sleeves. 30 C TIME (HOURS)
MSE 351 Engineering Ceramics I
Kwame Nkrumah University of Science & Technology, Kumasi, Ghana MSE 351 Engineering Ceramics I Ing. Anthony Andrews (PhD) Department of Materials Engineering Faculty of Mechanical and Chemical Engineering
More informationDense Refractories Product Data
High Property Tabular Alumina Castables Refractory GT-20 GT-20 Max service temp.( C) 1800 Bulk density(g/cm 3 ) 2.95 Typical Min Max Al 2O 3 94.59 94 CaO 1.44 2.0 Fe 2O 3 0.06 0.2 110 C 24h 78.4 1100 C
More informationInsulating Firebrick (IFB), Firebrick and Mortar products
Insulating Firebrick (IFB), Firebrick and Mortar products Section 12 Insulating Firebrick (IFB), Firebrick and Mortar products Metric information Page 95 99 Imperial information Page 100 102 Insulating
More informationREFRACTORY PRODUCTS. This product catalogue is compacted for electronical submission without references and illustrations for typical applications.
REFRACTORY PRODUCTS We appreciate the opportunity to present our product catalogue for refractory materials. The catalogue includes typical often used materials for different applications of industrial
More informationREFRACTORIES FOR MOLTEN IRON & STEEL
SHARADAA REFRACTORIES FOR MOLTEN IRON & STEEL MINISTEEL SLIDE GATE REFRACTORIES LADLE INNER / COLLECTOR NOZZLES TUNDISH NOZZLES POROUS PLUG WELL BLOCKS FOR LADLE / TUNDISH 95%, 90%, 60% CASTABLES 90K MORTOR
More informationREFRACTORIES. Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks
Topics REFRACTORIES Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks Definition Substances which can with stand high temperature without
More informationGlobal Innovation for your High Temp World
Foundry Refractories Global Innovation for your High Temp World Mission Statement Division of Fedmet Resources Corporation: We serve our clients in the high temp world by providing profitable solutions
More informationRefractories for Pig iron ladle
Refractories for Pig iron ladle 3 The chemical physical properties of the products The tables hereinafter show the main average properties of the products. These properties, verified by internal testings,
More informationEDITORIAL REVISION March Process Industry Practices Refractory. PIP RFSM1000 Monolithic Refractory Material Specification
March 2013 Process Industry Practices Refractory PIP RFSM1000 Monolithic Refractory Material Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
More informationEduardo Reis AFCM Hanoi April
Magnesita Refractory Optimization Model Eduardo Reis AFCM Hanoi April 15 Magnesita Refractory Optimization Model 1 Process Audit Clinker analysis Fuel & Alternative Fuels, Flame Coating area and its
More informationFire Clay Brick. Pyrophylite Brick. Pyrophylite -SiC-C brick. Pyrophylite -SiC brick. High Alumina Brick. Alumina-SiC-C Brick.
Fire Clay Brick Pyrophylite Brick Pyrophylite -SiC-C brick Pyrophylite -SiC brick High Alumina Brick Phosphate unbuned High alumina Brick Mullite brick for dry quenching device Alumina-SiC-C Brick Silica
More informationZ E H N E G N Z G H Z O H U
FUSED ALUMINA SERIES ZHENGZHOU ONWAY IMPORT & EXPORT CO. LTD Add.: Rm 536A, Xinyuan Int l Plaza, Western Jianshe Road, Zhengzhou, Henan, China Mobile: +86-15333719138 :+86-371-86106538 Fax:+86-371-86106138
More informationIntroduction to Refractories
Introduction to Refractories Refractories are material having high melting points, with properties that make them suitable to act as heat-resisting barriers between high and low temperature zones. ASTM
More informationWhite Fused Alumina. Specifications: Best Coarse Coarse Normal part Mixed part 100%pass these mesh NO. Grain size. Fine part.
28 Charlton Street, Mt. Warrigal. NSW. 2528. Australia. Phone: 0242 956915 Mobile: 0450 695691 e mail: john.pulbrook@bigpond.com Skype: johnpulbrook1 ABN 17 949 415 002 Our products include White Fused
More informationThe generic requirements from blast furnace refractories are summarised below:
BLAST FURNACE In the blast furnace iron ore is melted and reduced by coke and limestone. The materials are charged from the furnace top to form layers. Hot blast blown from furnace bottom burns coke and
More informationTYPICAL APPLICATIONS FOR RANDOM PACKINGS
TYPICAL APPLICATIONS FOR RANDOM PACKINGS Ceramic Random Pacings [Saddles, Super Saddles, Raschig Rings, Pall Rings] Manufacture and handling of sulfuric acid Chlorine Drying Towers Nitric Acid Concentrators
More informationLow Cement Castables. SUGGESTED HEATING PROCEDURES for RESCO LOW, ULTRA-LOW, AND NO CEMENT CASTABLES
SUGGESTED HEATING PROCEDURES for RESCO LOW, ULTRA-LOW, AND NO CEMENT CASTABLES The following schedule is recommended for Resco Products' Low, Ultra-Low, and No Cement Castables. Controlled release of water
More informationQualification of Micronized Kyanite and Silica Fume
Qualification of Micronized Kyanite and Silica Fume William L. Headrick Missouri Refractories Co., Inc. Formerly University of Missouri-Rolla Co-authors Dilip Jain, Kyanite Mining Corp. Musa Karakus, University
More informationSYSTEMIC ANALYSIS FOR THE SELECTION OF ANODE BAKING FURNACE REFRACTORIES
SYSTEMIC ANALYSIS FOR THE SELECTION OF ANODE BAKING FURNACE REFRACTORIES Mariana A. L. Braulio 1, Valerie MacNair 2, Victor C. Pandolfelli 3 1 4Cast - Technical Assistance and Consultancy on Refractories,
More informationHaseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Greek word Keramikos which means Burnt Stuff indicating that desired properties of these materials are normally achieved through a
More informationSHARADAA CEMENT & DRI SPONGE IRON INDUSTRIES CASTABLES AND REFRACTORIES FOR
SHARADAA CASTABLES AND REFRACTORIES FOR CEMENT & DRI SONGE IRON INDUSTRIES KILN COOLER REHEATER CYCLONE LOW CEMENT / ULTRA LOW CEMENT CASTABLES GEL BONDED NO CEMENT CASTABLES HIGH ERFORMANCE REAIR CASTABLES
More informationTechnical know-how from Carborundum, USA for Fired and Monolithics. Introduced Low Cement Castable technology in India for the first time in 1985
Commenced operations in 1965 at Tiruvottiyur in Chennai Technical know-how from Carborundum, USA for Fired and Monolithics Introduced Low Cement Castable technology in India for the first time in 1985
More informationNEW ANTI-OXIDATION TECHNOLOGY FOR TROUGH AND RUNNERS CASTABLES: A SUCCESSFUL SOLUTION AT ARCELOR MITTAL TUBARÃO BLAST-FURNACE #02*
2025 NEW ANTI-OXIDATION TECHNOLOGY FOR TROUGH AND RUNNERS CASTABLES: A SUCCESSFUL SOLUTION AT ARCELOR MITTAL TUBARÃO BLAST-FURNACE #02* Eric Yoshimitsu Sako 1 Wiliam Alves 2 Bruno Gonçalves Rangel 3 Nilton
More information1.6.3 Measurement of Linear Coefficients of Thermal Expansion Thermal Strains Thermal Shock
1 The Properties of Refractory and Heat Insulation Materials... 1 1.1 Classifications and Some Words About Quality Control... 1 1.2 Density, Porosity, and Related Characteristics; Types of Porosity....................................
More informationGel-Bonded Alumina Silicon Carbide Carbon-Based Blast-Furnace Trough Castable
Gel-Bonded Alumina Silicon Carbide Carbon-Based Blast-Furnace Trough Castable Incorporation of an organic fiber improved the densification, strength, corrosion and penetration properties, under dried and
More informationCertified Reference Material Series for X-ray Fluorescence Analysis of Refractories JRRM (Series No.1 for Fireclay Refractories)
JRRM 101-110 (Series No.1 for Fireclay Refractories) December 21, 2015 Constituent SiO2 Al2O3 Fe2O3 TiO2 MnO CaO MgO Na2O K2O JRRM 101 88.57 8.16 0.314 0.302 0.116 1.061 0.217 1.013 0.165 JRRM 102 80.47
More informationRefractor y Systems Direct Reduction Plants
Refractor y Systems Direct Reduction Plants Right: Various shapes and qualities of STEULER-KCH refractory products STEULER-KCH supplies the full range of refractories and ser vices for the DRI production
More informationCATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES INSULATING REFRACTORY CASTABLES...
CATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES... 11 INSULATING REFRACTORY CASTABLES... 17 REFRACTORY GUNNING MIX... 20 ASBESTOS-FREE COATING... 23 REFRACTORY
More informationINTRODUCTION TO CERAMICS, DR KASSIM AL-JOUBORY UNIVERSITY OF TECHNOLOGY BAGHDAD -IRAQ
INTRODUCTION TO CERAMICS, GLASS AND REFRACTORIES DR KASSIM AL-JOUBORY UNIVERSITY OF TECHNOLOGY BAGHDAD -IRAQ 10) REFRACTORIES ٢ Refractories are materials that can withstand high temperatures without softening
More informationDEVELOPMENT OF REFRACTORY BRICKS FROM NIGERIAN NAFUTA CLAY DEPOSIT
Vol. 1, No. 10, November 2013, PP: 189195, ISSN: 23270322 (Online) Research article DEVELOPMENT OF REFRACTORY BRICKS FROM NIGERIAN NAFUTA CLAY DEPOSIT A. A. Jock 1*, F. A. Ayeni 1, L. S. Jongs 1, N. S.
More informationRecovery of spent refractories: how to do it and using them as secondary raw materials for refractory applications
Recovery of spent refractories: how to do it and using them as secondary raw materials for refractory applications 23 Industrial Minerals International Congress Prague, June 2016 DEREF presentation Group
More informationRefractory Lining and Wear in the TORPEDO LADLE
Refractory Lining and Wear in the TORPEDO LADLE Dr. Waltraud Winkler, Linz Seminar: Refractory Technology Applications, Wear Mechanism, Failures Steel Academy Steel Institute VDEh PO box 104842 40039 Düsseldorf
More informationCost-Effective Quality Refractories for Ferro-Alloy Smelting Furnaces
Ferro Alloy Industries in the Liberalised Economy Editors : A.K. Vaish, S.D. Singh, N.G. Goswami and P. Rainachandrarao NML Jamshedpur 831007, 1997, pp. 143-148 Cost-Effective Quality Refractories for
More informationChemistry Department, Faculty of Science, Al-Azhar University [Girls], Nasr City, Cairo, Egypt **
Górnictwo i Geoinżynieria Rok 33 Zeszyt 4 2009 Marwa A.G. Elngar*, Fatma M. Mohamed**, Salwa A.H. El-Bohy*, Carmen M. Sharaby*, Mohamed El-Menshawi H. Shalabi** FACTORS AFFECTED THE PERFORMANCE OF FIRE
More informationMagnesium Aluminate Spinels
Product Data Magnesium Aluminate Spinels Spinel MR 66 10 µm Spinel AR 78 10 µm Spinel AR 90 10 µm Think alumina, think Almatis. GP-RCP/004/R09/1217/SDS 340 Magnesia-Rich Spinel MR 66 Chemical Composition
More informationBALLOT DRAFT. FOR REVIEW AND COMMENT ONLY.
Refractory Installation Quality Control Inspection and Testing of Refractory Brick Systems and Materials API STANDARD 975 Proposed FIRST EDITION Ballot Draft 1 Important Information Concerning Use of Asbestos
More informationCurrent Refractory Technology and Practices in the Steel Industry
Current Refractory Technology and Practices in the Steel Industry April 26, 2017 Rakesh K. Dhaka 2016 Steel Production in Numbers United States 4 th largest producer of steel in the world Source: World
More informationHearth and skid pipe refractories for reheating furnace a review
Hearth and skid pipe refractories for reheating furnace a review Sukhendu Dutte, Asim Gupta Metallurgical & Engg. Consultants Ltd. Ranchi Introduction Different types of furnaces are available for the
More informationModern Steelmaking Processes 1. Charge Materials. Topics to discuss. 1. Metallics 2. Auxiliary charges 3. Oxidants 4. Fuels 5.
11 Modern Steelmaking Processes 1. Charge Materials Topics to discuss 1. Metallics 2. Auxiliary charges 3. Oxidants 4. Fuels 5. Refractories Raw Materials Principal raw materials used for steel manufacture
More informationOur products have been developed for the special operating. Our services. Our solutions
in cement industry A d va n c e d refractories technology Our products have been developed for the special operating conditions required in the cement manufacturing process. Nowadays, more and more alternative
More informationInvestigation of Appropriate Refractory Material for Laboratory Electritic Resistrance Furnance
Investigation of Appropriate Refractory Material for Laboratory Electritic Resistrance Furnance Department Of Mechanical Engineering, Federal University of Technology, Minna, Nigeria E-mail: joe_agboola@yahoo.com
More informationCorrosion in GASCO Habshan CBA Units and its mitigation
Corrosion in GASCO Habshan CBA Units and its mitigation Orlando de Matos Inspection Department Head MESPON 2016 - Abu Dhabi 9 th to 11 th October 2016 AGENDA Introduction Process Description for CBA Units
More informationComparison of Silica-sol and Low Cement Bonded Tabular Alumina and Spinel Castables
Comparison of Silica-sol and Low Cement Bonded Tabular Alumina and Spinel Castables TIAN Zhongkai 1 *, LONG Bin 1, ZHOU Yunpeng 1, ZHANG Lanyin 1, KLAUS Sebastian 2, BUHR Andreas 2 1 Qingdao Almatis Co.
More informationI. Materials Properties and Cathode Construction 1 INTRODUCTION 1 THE CARBON LINING 4
Table of Contents Table of Contents I. Materials Properties and Cathode Construction 1 I. Materials Properties and Cathode Construction 1 INTRODUCTION 1 INTRODUCTION 1 THE CARBON LINING 4 THE CARBON LINING..
More informationREFRASUD INTERNATIONAL S.R.L.
REFRASUD INTERNATIONAL S.R.L. Page 2 of 8 INNOVATION TECHNOLOGY: CARBONXIDE The company Refrasud International S.r.l. (hereafter referred to as Refrasud), works in refractory field and offers different
More informationCATALOGUE TANGSHAN TALENTI TRADE 1 / 35
CATALOGUE CATALOGUE... 1 Company profile... 3 1. Fireclay Refractory... 4 1.1Fireclay refractory brick for general use... 4 1.2 Fireclay Refractory Bricks for blast furnaces... 5 1.3 Fireclay refractory
More informationEfficiency in Steel Melting: Ladle Development
Missouri University of Science and Technology Scholars' Mine Materials Science and Engineering Faculty Research & Creative Works Materials Science and Engineering 1-1-25 Efficiency in Steel Melting: Ladle
More informationBMW. Alumina92. Alumina Ceramic Division. An ISO Company
BMW Alumina Ceramic Division Alumina92 An ISO 9001-2008 Company About US Fiction, wear, and erosion are major issues, resulting in major costs to businesses operating in the Power Generation, Cement Plants,
More informationTeam Work - Failure Case Studies
Team Work - Failure Case Studies Dr. rer. nat. Andreas Buhr, Almatis GmbH, Frankfurt Seminar: Refractory Technology Applications, Wear Mechanism, Failures Steel Academy Steel Institute VDEh PO box 104842
More informationStandard Specification for Alumina Ceramics for Electrical and Electronic Applications 1
Designation: D 2442 75 (Reapproved 2001) Standard Specification for Alumina Ceramics for Electrical and Electronic Applications 1 This standard is issued under the fixed designation D 2442; the number
More informationRecycling of Steel Sludge into Red Ceramic
Recycling of Steel Sludge into Red Ceramic P. M. Andrade 1, C. M. F. Vieira 1, S. N. Monteiro 1, F. Vernilli Jr. 2 1 State University of the North Fluminense Darcy Ribeiro - UENF Advanced Materials Laboratory
More informationRefratechnik Energy Saving Series: Reduced energy consumption thanks to intelligent refractory technology.
Refratechnik Energy Saving Series: Reduced energy consumption thanks to intelligent refractory technology. Significant energy savings with the ES-SERIES ES-SERIES ES-SERIES ES-SERIES: Energy saving refractory
More informationMonolithic linings of cement kilns under conditions of combustion of alternative fuels. Annotation
Monolithic linings of cement kilns under conditions of combustion of alternative fuels Ing. Milan Henek,CSc 1, Ing. Zoltán Horváth 2, Ing. Anton Adamovič 2, Ing. Vlastimil Kocman 1 1 Průmyslová keramika,
More informationPIP RFTM1000 Monolithic Refractory Installation Qualification, Inspection, and Testing
March 2013 Process Industry Practices Refractory PIP RFTM1000 Monolithic Refractory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationEffect of high temperature and type of cooling on some mechanical properties of cement mortar
Effect of high temperature and type of cooling on some mechanical properties of cement mortar Faisal Abdulhussei 1, Waleed Abbas 2 and Qais Frayyeh 2, * 1 Madenat al-elem University College, Baghdad, Iraq
More informationHIGH PERFORMANCE REFRACTORIES.
2018 Specialty Aluminas FOR HIGH PERFORMANCE REFRACTORIES www.alteo-alumina.com Aluminas for refractories Alumina is one of the most common oxides used in refractory applications. ln a typical refractory,
More informationAn Attempt to Develop Sulfate Bonded Alumino Silicate Refractories
An Attempt to Develop Sulfate Bonded Alumino Silicate Refractories D. Sarkar 1*, P.Sengupta 1, N.R. Bhattacharya 1, S. Das 1, P.K. Das. Poddar 2 1 Sarvesh Refractory (P) Ltd, Power House Road, Rourkela
More informationMetallurgical Analysis of Ugunoda Clay Deposit, Nigeria for Use as a Refractory
Metallurgical Analysis of Ugunoda Clay Deposit, Nigeria for Use as a Refractory AYE, A.E Department of Foundry Engineering Technology, Federal Polytechnic, Idah, Kogi State Nigeria aaron1963a@yahoo.com
More informationpage 2-3 page 4-5 page 6-13 page page page page page page page 47 page page 68-73
Refractory Products page 2-3 page 4-5 page 6-13 page 14-23 page 24-31 page 32-37 page 38-39 page 40-42 page 43-46 page 47 page 48-67 page 68-73 page 74-75 page 76-79 page 80-81 Our company Experience &
More informationMarinite P structural insulation is
BNZ Materials, Inc. Marinite P Refractory Products Fire-Resistant Structural Insulation Marinite P structural insulation is an incombustible, selfsupporting board that combines high insulating values,
More informationSilplateTM Structural Insulating Board. The Revolutionary Lining System For Processing And Transportation Of Molten Metal
SilplateTM Structural Insulating Board The Revolutionary Lining System For Processing And Transportation Of Molten Metal The Silplate TM Lining System Silplate TM is a structural insulation board with
More informationHOT ABRASION RESISTANCE OF SOME LOW CEMENT CASTABLES Dr. Sankar Kannabiran CTO- HÖGÄNAS /Borgestad Industries- SWEDEN Presented in IRE UK- conference
HOT ABRASION RESISTANCE OF SOME LOW CEMENT CASTABLES Dr. Sankar Kannabiran CTO- HÖGÄNAS /Borgestad Industries- SWEDEN Presented in IRE UK- conference SCOPE HOT ABRASION TESTS- CONTENTS BACKGROUND AND STANDARDS
More informationDALMIA SEVEN understands your specific requirements and serves them innovatively with the most advanced technology.
in cement industry A d va n c e d refractories technology DALMIA SEVEN is not only a new name, but a new promise: to bring tradition and innovation together for the purpose of serving the Indian market
More informationOptimization of FCCU Expansion Joint Application, System Design and Reliability Considerations. Tej Chadda Director, Technology Technical Services
Optimization of FCCU Expansion Joint Application, System Design and Reliability Considerations Tej Chadda Director, Technology Technical Services Optimization of FCCU Expansion Joint Expansion Joints in
More informationEngineered Solutions for Catofin Applications
Engineered Solutions for Catofin Applications LOYAL CUSTOMERS IBN ZAHR; 1 Jubail, Saudi Arabia IBN SINA; Jubail Saudi Arabia Texas Petrochemicals; Houston, Texas, USA Pemex; Coatzacoalcos, Mexico Brunei,
More informationGLASS INDUSTRY REFRACTORY & LINING PRODUCTS FOR HIGH TEMPERATURE APPLICATIONS
GLASS INDUSTRY REFRACTORY & LINING PRODUCTS FOR HIGH TEMPERATURE APPLICATIONS PRESENTATION BELREF REFRACTORIES operates out of Saint-Ghislain (Mons - Belgium) and is a world player in the supply of refractory
More informationINCONEL DATA SHEET
IS A NICKEL CHROMIUM ALLOY UTILIZED FOR APPLICATIONS THAT OBLIGE RESISTANCE TO CORROSION AND HEAT. THESE NICKEL ALLOYS EMERGE BECAUSE OF ITS RESISTANCE TO HIGH TEMPERATURE OXIDATION, REMAINING EXCEPTIONALLY
More informationFuels, Furnaces & Refractories
Fuels, Furnaces & Refractories 3. Refractories Dr. Eng. Yazan Al-Zain Department of Industrial Engineering University of Jordan 1 Classification of Refractories There is no general definition of a refractory.
More informationINCOLOY alloy 803. Publication Number SMC-033 Copyright Special Metals Corporation, 2004 (Sept 04)
INCOLOY alloy 83 (UNS S3545), an iron-nickelchromium alloy, is designed for use in petrochemical, chemical and thermal processing applications. The nickel and chromium contents of alloy 83 are higher than
More informationINTRODUCTION OF.
INTRODUCTION OF LINCO BAXO GROUP www.lincobaxo.com Group core business Development, Manufacture, Procurement, Supply and Sales of Dense and Insulating Refractory Products Containing Alumina, Alumino-Silicates,
More informationRefractories 1999 U S C E N S U S B U R E A U. Current Industrial Reports. Helping You Make Informed Decisions. (Formerly Series No.
Refractories 1999 Issued September 2000 MA327C(99)-1 (Formerly Series No. MA32C) Information about the scope of the survey, amounted to $2,243.1 million, a decrease of methodology, explanation of terms
More informationFused Magnesia Trends. Global Outlook. Asım Bilge MagForum 2016, Vienna Kümaş Manyezit San. A.Ş.
Fused Magnesia Trends & Global Outlook Asım Bilge MagForum 2016, Vienna Kümaş Manyezit San. A.Ş. Contents Fused Magnesia Global FM Market, Demand and Prices Effects of Global Economy Issues Kümaş FM Production
More informationIncinerator Systems NFPA 82 Inspection Form
Incinerator Systems NFPA 82 Inspection Form PART 1 INCINERATORS DESIGN AND AUXILIARY FUEL ELECTRICAL SUPPLY AIR FOR COMBUSTION AND VENTILATION SPARK ARRESTERS 1. Are gas-burning installations designed
More informationComparative Strengths of Refractories versus Corundum in Furnace Linings. Kenneth A. McGowan, PhD Peter A Beaulieu
Comparative Strengths of Refractories versus Corundum in Furnace Linings Kenneth A. McGowan, PhD Peter A Beaulieu Refractory manufacturers have spent countess hours selling the virtues of the high crushing
More informationCARBORUNDUM UNIVERSAL LIMITED
MagAl Spinel Zirconia Vs. Alumina - Zirconia Refractory for Hard Black Reactor Ravikumar N, Ranjan Dey, Eswaran V T, Rajagopalan R CARBORUNDUM UNIVERSAL LIMITED Contents : Refractory Application in Carbon
More informationContainment Materials Issues in High-Temperature Black Liquor Gasification
Containment Materials Issues in High-Temperature Black Liquor Gasification James Keiser, James Hemrick, Roberta Meisner, Gorti Sarma and Kimberly Choudhury Oak Ridge National Laboratory Peter Gorog and
More informationINCONEL alloy 693. Publication Number SMC-043 Copyright Special Metals Corporation, 2005 (Feb 05)
www.specialmetals.com alloy 693 - Excellent Resistance to Metal Dusting and High Corrosion alloy 693 (UNS N6693) is a new alloy from Special Metals which offers resistance to high temperature corrosion
More informationImproving Melting Efficiency Through the Application of New Refractory Materials
Missouri University of Science and Technology Scholars' Mine Materials Science and Engineering Faculty Research & Creative Works Materials Science and Engineering 1-1-26 Improving Melting Efficiency Through
More informationCalcium Aluminate Cements
Global Product Data Calcium Aluminate Cements Think alumina, think Almatis. GP-RCP/005/R08/0516/SDS 993 Products Almatis produces high purity Calcium Aluminate Cements with 70 and 80 % Al 2 O 3 content.
More informationHigh Strength Concrete With Pond-Ash as Partially Replaced by Fine Aggregate and Fine Fly-Ash, Alccofine as Cement
GRD Journals Global Research and Development Journal for Engineering Recent Advances in Civil Engineering for Global Sustainability March 2016 e-issn: 2455-5703 High Strength Concrete With Pond-Ash as
More informationBlast Furnace Regions Iron Making Furnace
Blast Furnace Regions Iron Making Furnace The thickness of the lining depends on the furnace size STACK LINING The lining in stack should have good abrasion resistance and resistance to CO attack. In general,
More informationSHARADAA PRECAST LANCES PRECAST SHAPES INSULATING BOARDS COATINGS SHARADAA CERAMICS PVT LTD
SHARADAA CASTABLE REFRACTORIES PROTECTS - DEFENDS PRECAST LANCES PRECAST SHAPES INSULATING BOARDS COATINGS SHARADAA CERAMICS PVT LTD SHARADAA CERAMICS REFRACTORY CASTABLES Started Manufacturing operations
More informationRefractory Ceramic Fiber
www.aislamientosyrefractarios.com Refractory Ceramic Fiber September 10, 2009 Agenda Refractory Ceramic Fiber Typical Characteristics Types of RCF Products Specifications Applications Emisshield / Ceramic
More informationRefractory Systems Non-ferrous Metallurgy
Refractory Systems Non-ferrous Metallurgy Left: Rotary tilting furnace for recycling under usage of salts Refractory linings for non-ferrous metallurgy The Refractory Division of STEULER-KCH designs, produces
More informationComparative Reduction Behavior of Various Cement Coated Iron Ore Pellets
doi: 10.14355/me.2015.04.005 Comparative Reduction Behavior of Various Cement Coated Iron Ore Pellets M. Bahgat* 1, S. Niaz 2, S. Lakdawala 3 and H. Hanafy 4 1 Currently Lead scientist, Metal technology
More informationFangYuan Group LTD. Refractory Materials for Electric Smelting Furnaces. The World s Leader in Refractory Materials. Edition 2007
FangYuan Group LTD The World s Leader in Refractory Materials. Edition 2007 Refractory Materials for Electric Smelting Furnaces INTRODUCTION We have successfully served over 300 electric smelting furnace
More informationOriginal papers. Submitted January 12, 2009; accepted September 1, 2009
Original papers Non-cement refractory castables containing nano-silica: Performance, microstructure, properties S. Hossein Badiee, Sasan Otroj* Faculty of Engineering, Islamic Azad University (Shahrood
More informationBasic refractories for Steel ladle
Basic refractories for Steel ladle 3 The chemical physical properties of the products The tables hereinafter show the main average properties of the products. These properties, verified by internal testings,
More informationFangYuan Group LTD. The World s Leader in Refractory Materials. Blast Furnace Lining Products
FangYuan Group LTD The World s Leader in Refractory Materials. Blast Furnace Lining Products Edition 2008 INTRODUCTION We have successfully served over 500 blast furnace lining installations and over 300
More informationRaw Material challenges in refractory application. Fraunhofer Institute for Laser Technology ILT - Germany
Raw Material challenges in refractory application Dr. Erwan Guéguen Dipl.- Geol. Johannes Hartenstein Dr. Cord Fricke-Begemann Magnesita Refractories SCS - France Magnesita Refractories Gmbh - Germany
More informationSteels Ltd. Cast Basalt Division BASALT450. An ISO Company
BMW Steels Ltd Cast Basalt Division TM BASALT450 An ISO 9001-2008 Company Company Profile BMW Steels Ltd was formed in 1962 as a one stop shop have been proved second to none in the industry. for wear
More informationF.I.R.E. SHP FOREHEARTH
F.I.R.E. SHP FOREHEARTH The SHP forehearth (Patent no. WO 010/015964 A) is able to guarantee a minimum of 98% (soda lime colored glass) of thermal homogeneity at the triple thermocouple near the spout.
More informationOHMALOY 30 and OHMALOY 40
OHMALOY 30 and OHMALOY 40 Resistance Alloys (UNS K91470 and K91670) INTRODUCTION Ohmaloy 30 and Ohmaloy 40 alloys are moderately magnetic, ductile stainless steels having extremely high electrical resistivity.
More informationFeatures & Grade. ZrO2. Base Material. Micro Structure (X5000) TaeguTec Ceramic Wear. Features and application AW AW10-960
& Grade TaeguTec Ceramic Wear SiC ZrO2 AC1 AS2 AS7 AB3-998 - 99-96 Base Material Grade and application Micro Structure (X5) Density g/cm 3 3.18 3.4 3.5 2.4 4.25 6.5 5.7 3.98 3.85 3.7 Hardness HV 25 16
More informationExperimental Study on Partial Replacement of Coarse Aggregate with Ceramic Tile Wastes and Cement with Glass Powder
International Journal of ChemTech Research CODEN (USA): IJCRGG, ISSN: 0974-4290, ISSN(Online):2455-9555 Vol.10 No.8, pp 74-80, 2017 Experimental Study on Partial Replacement of Coarse Aggregate with Ceramic
More informationImprovement of the binder system of Refractory Castables with advanced Calcium Aluminate Cements " Authors: Nikolaus Kreuels, Holger Schaffhauser
Improvement of the binder system of Refractory Castables with advanced Calcium Aluminate Cements " Authors: Nikolaus Kreuels, Holger Schaffhauser 1 The environment of Refractory Castables" Challenges Potential
More informationTechnical Paper MCC AND HCC: DEFLOCCULATED HIGH PERFORMING CASTABLES RICH IN CALCIUM ALUMINATE BINDER. Christoph Wöhrmeyer, Chris Parr*,
Reference : TP-GB-RE-LAF-64 Page : 1/8 MCC AND HCC: DEFLOCCULATED HIGH PERFORMING CASTABLES RICH IN CALCIUM ALUMINATE BINDER Christoph Wöhrmeyer, Chris Parr*, * Kerneos GmbH, Oberhausen, Germany; Kerneos
More informationPRODUCT LIST (REFRACTORIES)
PRODUCT LIST (REFRACTORIES) For IRON & STEEL INDUSTRY Coke Oven Silica Bricks Mullite, Mullite-silicon Carbide Bricks for Dry Quenching Fire Clay Bricks Hot Blast Stove Silimanite-Mullite & Andalusite
More informationImpact of Fly Ash and Silpozz as Alternative Cementitious Material in Crusher Dust Concrete [1]
Impact of Fly Ash and Silpozz as Alternative Cementitious Material in Crusher Dust Concrete [1] S. Jena, [2] K. C. Panda, [3] P. Sarangi [1] Assistant Professor, [2] Associate Professor, [3] Assistant
More information