CEMENT MANUFACTURING PROCESS
|
|
- Darrell May
- 6 years ago
- Views:
Transcription
1 CEMENT MANUFACTURING PROCESS
2 Definition: Defined as a product material obtained by calcination of calcareous (a material containing lime) and argillaceous (a material which contain silica) materials. According to (specification stand as) ASTM (American standard testing material) Cement is defined as a product obtained by pulverizing (crushing followed by grinding) clinkers to which no addition has been made except H2O.
3 Composition Chemically cement is a mixture of Silicates, Aluminates like aluminoferrites with some amount of MgO and gypsum. Various complexes which are contained in cement are (2CaO.SiO 2 ) Di Calcium Silicate (C 2 S) 22-24% (3CaO.SiO 2 ) Tri Calcium Silicate (C 3 S) 50-58% (3CaO.Al 2 O 3 ) Tri Calcium Aluminate (C 3 A) 10-11% (4CaO.Al 2 O 3.Fe 2 O 3 ) Tetra Calcium Aluminoferrite (C 4 AF) 8-9% (6CaO.Al 2 O 3.Fe 2 O 3 ) Hexa Calcium Aluminoferrite (C 6 AF) traces MgO <5% Gypsum (CaSO 4.2H 2 O) 4-5%
4 Various oxides Cement contains various oxides as follows 1) CaO 60-66% 2) Total silica 20-15% a) Combined silica/active silica b) Uncombined or inert silica 3) Alumina (Al 2 O 3 ) 3-8% 4) Fe 2 O 3 1-5% 5) MgO <5% 6)Alkalies <5%
5 Color The gray color in cement is due to presence of complexes of Ferric ions in O.P.C (ordinary Portland cement). White cement is produced from those raw materials which contain extremely low conc. of Iron & even like low conc. of Iron is converted from Fe +3 to Fe +2 (which can be done by reducing or maintaining atmosphere in the kiln) & eventually the product appears to be white.
6 Raw materials used in the production of O.P.C: 1) Lime stone 2) Clay 3) Gypsum
7 Lime stone: Lime stone on calcinations gives CaO which is an essential component of all the complexes (silicates, aluminates and aluminoferrites) present in cement. Lime stone is available in two lime forms. A) High lime: High lime is that lime stone which on calcination gives CaO of greater than 90% purity. The high lime contain Magnesia (MgO) less than 5% and rest of the impurities may be alumina, Fe 2 O 3,SiO 2. High lime is available in Pakistan in the area of Banu District Kohat,D.G khan, D.I khan,salt area of Mianwali.
8 Cont.. B) Low lime Low lime means the limestone which on decomposition yields CaO of less than 90% purity. Alumina & MgO is present to an extent of greater than10%. Dolomite rich in MgCO 3 should not be used in the manufacture of Portland cement.
9 Clay The complexes such as silicates, aluminates & aluminoferrites all contain SiO 2, & Al 2 O 3.These are added into O.P.C by clay. Ordinary clay found in the area close to the mines of lime stone have high quality clay. The clay need for all production of O.P.C should meet the following requirements. 1) It must be high in silica contents 2) Comparatively low in the amounts of Al 2 O 3 3) Low in the amount of alkalis In case if clay doesn t conform to the required specifications of oxides then the clay has to be beneficiated before use.
10 Gypsum When H 2 O is added into the cement & it is not thoroughly mixed then tricalciumaluminate picks up H 2 O and rapidly hardens. This phenomenon is called as flash setting. The flash setting in cement is retarded by the addition of Gypsum which forms the following complex (3CaOAl 2 O 3. 3CaSO 4.31H 2 O) The time of hardening of cement is increased. Thus the Gypsum containing cement gets hardened in comparatively longer period of lime.
11 Fuel Prior to 1971 the cement industry used furnace oil as fuel in cement industry. As an higher energy consuming industry in which energy is required for crushing, grinding, mixing & running of various units. Prior to 1971 most of the industries in Pakistan used furnace oil as a fuel. However after 1971 the majority of the cement industries was switched over to natural gas. In the past few years the importance of natural gas was realized for the production of petrochemicals and the cement plants were converted into furnace oil fired units now most of the cement industry is being switched over to using coal as a fuel.coal is available in Pakistan in Baluchistan, area of Makarwal (Mianwali district)
12 The indegeneous coal contains high % of organic as well as inorganic sulphur which in some cases is as high as 6.8%. High sulphur contents make the Pakistan coal inferior as the S compound lower the calorific value of coal. If coal contains high contents of S is burnt, proportional higher quantity of SO 2 or SO 3 will be added into the exhaust of flue gasses.
13 Water If cement is produced by wet process large quantity of H 2 O is needed. The H 2 O should not be saline in nature.
14 Various steps involved in the Production of cement: Cement production involves following steps 1) Crushing & grinding of clay and lime stone. 2) Mixing of ground raw material to obtain an almost homogeneous mass. 3) Transportation of material ground raw materials to rotary kilns & burning of raw materials to clinkers. 4) Grinding of clinkers in the presence of CaSO 4.2H 2 O
15 Step no 3 & 4 are as like on all the cement plants however step no 1 & 2 may be carried out in two ways. a) The crushed materials is ground & mixed in the presence of H 2 O to obtain slurry containing 40%H 2 O &60% solids. This method is called as wet method. b) If the crushed material is ground & mixed in absence of H 2 O & dry homogenized mass is fed into the kiln for burning. The process is called as dry process.
16 Comparison between wet and dry processes: Wet process 1. Soft raw material is used 2. The crushed material is ground in the presence of H 2 O to form a slurry paste.the slurry is than fed in to the rotary kiln for the manufacture of cement 3. Grinding is done in rotary ball mills in the presence of H 2 O to obtain slurry of ground lime stone & clay. Dry process 1. Hard or soft any type of raw material is used for the production of cement. 2. The crushed material is ground in dry &the feed given to the kiln is in the form of dry powder. 3. The grinding is conducted in the roller mill which combines grinding drying as well as classification. In that roller mills particles of dried size are collected through a classification.
17 4. Fuel consumption is comparatively more as the slurry added in the rotary kiln is 30-40%H 2 O and 60-70% solids. Substantial amount of heat is used in evaporation of H 2 O 5. Exposure to the effect of heat is for a longer period and hence the operating life of the lining of the kiln is less. 6. The length of the rotary kiln is more which may be between ft usually and it may be sometime even as long as 500 ft. 4. Since water has not to be evaporated so less fuel consumption. 5. Exposure to the effect of heat is less & hence the operating life of the lining of the kiln is more. 6. The length of kiln is usually about 150 ft which may in some cases be 250 ft.
18 7. The cost of insulation is high. 8. Thermal efficiency is higher as the flue gases leave the kiln at about C. 7. The cost of insulation of kiln is less. 8. Thermal efficiency in the kiln is less as the gases leaving the rotary kiln are about 300 o C. 9. The loss of raw material in the form of dust contained in the flue gas coming out of the kiln is less. It amounts to about 1.5% of the clinker produced. 9. The loss of the raw material in the form of dust is much higher and about 15% raw material is lost with the flue gas coming out of the kiln.
19 10. The dust particles leaving with the flue gas are recovered by installing scrubbers, cyclone separators and by installing high density electrical precipitators. 11. The recovery of heat from the flue gases is less. 10. Dust contained in the flue gas is recovered in the same way as in wet process. 11. The heat recovery in dry process is 20% more in this process.
20 Crushing & grinding of clay and lime stone The limestone and the clay needed for the production of cement as excavated from the quarries are crushed to approximately a particle size of 100mm using crushers which are called as the primary crushers. The secondary crusher installed in the same area crushes the limestone and the clay to obtain a particle size of about 10mm. In the wet process, the crushed lime and clay is fed into a rotary grinding ball mill in the presence of water. The grinding is carried out using the technique of close circuit.
21 Mixing of ground raw material to obtain an almost homogeneous mass The lime and clay obtained from the classifier is received in a correcting tank where the composition w.r.t. limestone and clay is adjusted. The slurry should contain 65-70% limestone and 30-35% clay in it. In case any of the two is less in quantity, the difficulty is made up by adding required quantity of deficient material. Then slurry containing corrected limestone and clay is pumped to a dark thickener where excess of water of any is removed which in turn is reused for grinding in the ball mill. The slurry obtained from the dark thickener should contain 30-40% water and 60-70% of the solids. This slurry is then introduced into the kiln for pyro processing (heat treatment).
22 Transportation of ground raw materials to rotary kilns & burning of raw materials to clinkers Construction and working of the rotary kiln: The pyro-processing of slurry obtained in the wet method and the dry ground raw materials in the dry process is carried out in a rotary kiln. It is made from sheets of plain carbon steel riveted together to obtain a shell. In the old versions the rotary kiln tapered towards the top. Now a days large no. of cement industry is using rotary kiln of uniform internal diameter. In the old versions the rotary kiln was placed in a way that it made an angle of 15 degrees with the horizontal which facilitates the movement of material from the feed end to the discharge end.
23 Construction and working of the rotary kiln: Now a days the inclination of shell with the horizontal has been reduced to about 5-6 degrees. To facilitate the movement of the material from feed end to the discharge end, chains are installed inside the rotary kiln. The kiln rotates in the clockwise direction by standing at the discharge end. The revolutions of the kiln about its axis ranges between half to one rpm in some cases, while in the others it may be 1-3 rpm. This depends upon the size of the kiln which may be ft in case of wet process and up to 150 ft in dry process. From the feed end to the discharge end the total time taken for the movement of material is between 2-3 hours.
24 Cont.. The temperature maintained inside the rotary kiln ranges between degree Celsius in dry process and degree Celsius in wet process. At elevated temperature, calcium oxide behaves as a very strong base and it can attach the material of construction of the shell of rotary kiln. It is therefore necessary to take appropriate measure to increase the working life of rotary kiln. For this purpose, lining is provided on the interior of the shell of rotary kiln.
25 Merits of Lining in rotary kiln A lining provided in the rotary kiln has the following merits: 1. The chemical attack of calcium oxide leading to corrosion of material of construction of shell be eliminated. 2. The lining used is of a refractory material which processes very low thermal conductivity hence heat losses from rotary kiln to atmosphere would be reduced.
26 Cont.. The ordinary fire bricks which contain a very high percentage of silica cannot be used for the purpose of lining as silica contained in it may react with CaO to form CaSiO 2 which may solidify inside the kiln forming rings which may obstruct the movement of material inside the kiln from the feed end to discharge end. Usually high aluminium bricks produced from bauxite are used for the purpose of lining. In the old version of the rotary kiln the lining of 9 inches were provided from first 100 ft staring from discharge end where as the next 110ft was lined with 7 inches thick brick of bauxite. Now a days the kiln usually processes a uniform lining.
27 Temperature Zones of Rotary kiln Temperature Range Working C C /900 0 C 1. Evaporation of water. This zone shall not be existed in dry process. 2. (a)evaporation of combined water means chemically bound water. (b)decomposition of carbonate starts. 3. Burning of organic matter.
28 Cont o C C 4. Volatilization of alkalis. Volatilization of chlorides. Evolution of CO 2 from CaCO 3 and the existence of free CaO start. 5. In this zone, main reaction between lime and clay takes place which is further subdivided into the following: a) C (Formation of tricalcium aluminate and tetracalcium aluminoferrite.) b) C (Max. formation of tricalcium aluminate and dicalcium silicate.)
29 Cont C C 6. Commencement of liquid formation. 7. Further formation of molten mass and the formation of main constituent of cement i.e. tricalcium silicate. In this range most of CaO from the decomposition of lime stone gets associated to form various complexes.
30
31 Clinker Formation The product obtained due to high melting temperature gets converted into the form of circular balls called as clinkers which vary in this size between 1/8 to 3/8 inches, the clinkers are collected in a cooler where they are cooled using a draft of cold air. Wet air gets heated to C and used in the burning of fuel in the rotary kiln. The flue gases leaving at the feed end pass through an integrated system of scrubbers, cyclone separator and electrical precipitators to recover the dust particles of the raw material.
32 CLINKER GYPSUM
33 Grinding of the clinkers: The clinkers are ground in the presence of 4-5% gypsum to obtain fine powder which may confirm to the following specification: ASTM The 78% of the ground material should pass through 200 mesh sieve.
34
35 THE CEMENT MANUFACTURING PROCESS quarry loader dumper Quarry face 1. BLASTING 2. TRANSPORT crushing conveyor storage at the plant 3. CRUSHING & TRANSPORTATION 1. BLASTING : The raw materials that are used to manufacture cement (mainly limestone and clay) are blasted from the quarry. 2. TRANSPORT : The raw materials are loaded into a dumper. 3. CRUSHING AND TRANSPORTATION : The raw materials, after crushing, are transported to the plant by conveyor. The plant stores the materials before they are homogenized. Next
36 THE CEMENT MANUFACTURING PROCESS Raw grinding and burning storage at the plant conveyor Raw mill Raw mix preheating 1. RAW GRINDING kiln cooling clinker 2. BURNING 1. RAW GRINDING : The raw materials are very finely ground in order to produce the raw mix. 2. BURNING : The raw mix is preheated before it goes into the kiln, which is heated by a flame that can be as hot as 2000 C. The raw mix burns at 1500 C producing clinker which, when it leaves the kiln, is rapidly cooled with air fans. So, the raw mix is burnt to produce clinker : the basic material needed to make cement. Back Next
37 THE CEMENT MANUFACTURING PROCESS Grinding, storage, packing, dispatch clinker storage Gypsum and the secondary additives are added to the clinker. Finish grinding silos 1. GRINDING dispatch bags 2. STORAGE, PACKING, DISPATCH 1.GRINDING : The clinker and the gypsum are very finely ground giving a pure cement. Other secondary additives and cementitious materials can also be added to make a blended cement. 2. STORAGE, PACKING, DISPATCH :The cement is stored in silos before being dispatched either in bulk or in bags to its final destination. Back Home page
Concrete Technology. 1- Neville, AM and Brooks J.J." Concrete Technology" Second Edition, 2010.
Syllabus. Introduction 2. Cement 3. Aggregate 4. Fresh Concrete 5. Strength of Concrete 6. Elasticity, Shrinkage and Creep 7. Concrete Durability 8. Concrete Mix Design 9. Special Concretes Text Book -
More informationModule: 5 Lecture: 24
Module: 5 Lecture: 24 CEMENT MANUFACTURE MANUFACTURE It involves the following steps 1. Mixing of raw material 2. Burning 3. Grinding 4. Storage and packaging 1. Mixing of raw material Mixing can be done
More informationUtilization of Coal Slurry Waste as an Alternative Raw Material in Portland Cement Clinker Production
Utilization of Coal Slurry Waste as an Alternative Raw Material in Portland Cement Clinker Production Mustafa Ziypak, Zeki Olgun, Mustafa Turan, Julide Erdogan, Yasemin Kilic, Aylin Sahin, Mustafa Kara
More informationConcrete Technology. Brief Recap
Concrete Technology Brief Recap Manufacturing Process of Portland Cement Raw material for cement Calcareous Materials e.g. limestone Chalk marl Argillaceous materials e.g. Clay Shale Calcarious:Composed
More informationUnit-V Chemistry of Engineering Materials
Unit-V Chemistry of Engineering Materials Basic terms and definition Cement A material possesses adhesive and cohesive properties and capable of bonding materials like bricks, stones, building blocks,
More informationCIV2226: Design of Concrete and Masonry Structures
CIV2226: Design of Concrete and Masonry Structures Concrete Technology... 2 Concrete Mix Design... 2 Portland Cement... 4 Supplementary Cementitious Materials... 5 Concrete Aggregates... 6 Chemical Admixtures...
More informationCIVIL ENGINEERING. For. UPSC Engineering Services Examination, GATE, State Engineering Service Examination & Public Sector Examination.
CIVIL ENGINEERING For UPSC Engineering Services Examination, GATE, State Engineering Service Examination & Public Sector Examination. (BHEL, NTPC, NHPC, DRDO, SAIL, HAL, BSNL, BPCL, NPCL, etc.) BUILDING
More informationIntegrated Pollution Prevention and Control (IPPC) Reference Document on Best Available Techniques in the Cement and Lime Manufacturing Industries
EUROPEAN COMMISSION Integrated Pollution Prevention and Control (IPPC) Reference Document on Best Available Techniques in the December 2001 Executive Summary EXECUTIVE SUMMARY This Reference Document
More informationFOUNDATION TRANSFORMATION VALUE Analyst & Investor Day On Location. May 10, 2016 Dallas, Texas
FOUNDATION TRANSFORMATION VALUE Analyst & Investor Day On Location May 10, 2016 Dallas, Texas www.martinmarietta.com Disclaimer Statement Regarding Safe Harbor for Forward-Looking Statements This presentation
More informationEnergy Saving Measures in. Cement Industry
CH2356 Energy Engineering Energy Saving Measures in Cement Industry Dr. M. Subramanian Associate Professor Department of Chemical Engineering Sri Sivasubramaniya Nadar College of Engineering Kalavakkam
More informationHow to Read a Portland Cement Mill Test Report
How to Read a Portland Cement Mill Test Report David J. Imse, P.E. Skyway Cement Company, LLC ASTM C150 Portland Cement Specification Mill Test Reports Due to overlaps in requirements and strength levels
More informationBeginning of the Industry. Portland, Blended, and Other Hydraulic Cements
and Other Hydraulic Oldest Concrete Found To Date dates around 7000 BC a lime concrete floor found during the construction of a road at Yiftah El in Galilee, Israel. Beginning of the Industry Portland
More informationVariation of Feed Chemical Composition and Its Effect on Clinker Formation Simulation Process
Proceedings of the World Congress on Engineering and Computer Science 2010 Vol II, October 20-22, 2010, San Francisco, USA Variation of Feed Chemical Composition and Its Effect on Clinker Formation Simulation
More informationUtilization of vast quantity of ash produced by Thermal power plants
Utilization of vast quantity of ash produced by Thermal power plants Nikky kumar jha Student(Undergraduate) G.L Bajaj institute of technology and management Greater Noida, Uttar Pradesh India. ABSTRACT
More informationMODELLING A CEMENT MANUFACTURING PROCESS TO STUDY POSSIBLE IMPACTS OF ALTERNATIVE FUELS. Abstract
MODELLING A CEMENT MANUFACTURING PROCESS TO STUDY POSSIBLE IMPACTS OF ALTERNATIVE FUELS Ursula Kääntee*, Ron Zevenhoven**, Rainer Backman***, Mikko Hupa*** *Finnsementti Oy, FIN-21600 Parainen FINLAND
More informationLife Cycle Assessment of the Cement Industry in Zimbabwe
Life Cycle Assessment of the Cement Industry in Zimbabwe Charles Mbohwa 1, Sibusiso Moyo 2 1 University of Johannesburg, Johannesburg, Gauteng, South Africa, 2 University of Zimbabwe, Harare, Zimbabwe
More informationCement industry Industrial emissions IPPC
This project is funded by the European Union Cement industry Industrial emissions IPPC Andrzej Werkowski, Expert GHG Inventory and MRV of Industrial Emissions Workshop, Tbilisi, 27-28 March 2017 Multiple
More informationBin Level Indication Applications in Cement Production and Concrete Batching Plants
Bin Level Indication Applications in Cement Production and Concrete Batching Plants Introduction Concrete is fundamental to our modern day construction and a key part of our global economy. Concrete is
More informationA Short Study to Test the Compliance of Various Pakistani Ordinary Portland Cements with ASTM Composition Standards
Pak. J. Chem. (): 1-7, 1 ISSN (Print): -5 ISSN (Online): -7X Full Paper A Short Study to Test the Compliance of Various Pakistani Ordinary Portland Cements with ASTM Composition Standards A. Shahnaz, *
More informationChapter 5 INORGANIC AND FINE CHEMICALS
Chapter 5 INORGANIC AND FINE CHEMICALS Contents Sulfuric Acid The Chlor-Alkali Industry Cement Industry Glass Industry Fertilizer Sulfuric Acid Largest tonnage Raw material is sulfur Sources: Direct mining
More informationHaseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Greek word Keramikos which means Burnt Stuff indicating that desired properties of these materials are normally achieved through a
More informationIRISH CEMENT PLATIN INVESTING IN OUR FUTURE
IRISH CEMENT PLATIN INVESTING IN OUR FUTURE INTRODUCTION Investing in our future. The next phase of investment in Platin will see further energy efficiency improvements with on site electricity generation
More informationDevelopment of EAF Dust Recycling and Melting Technology Using the Coal-based FASTMELT Process
Development of Recycling and Melting Technology Using the -based FASTMELT Process By M. Tateishi, H. Fujimoto, T. Harada, H. Sugitatsu Kobe Steel, Ltd. Editor s note: this article was adapted from a paper
More informationFlue Gas Desulphurization (FGD) plant 2 x 600 MW Coal based Thermal power plant Cuddalore, Tamil Nadu. By MK Parameswaran 23 rd Dec, 2016
Flue Gas Desulphurization (FGD) plant 2 x 600 MW Coal based Thermal power plant Cuddalore, Tamil Nadu. By MK Parameswaran 23 rd Dec, 2016 Introduction Flue Gas Desulfurization is a process of removing
More informationProduction and Characteristics of Rock Dust Applied in Underground Mines. April 13, 2017
Production and Characteristics of Rock Dust Applied in Underground Mines April 13, 2017 About Greer Lime Greer Lime Company is located near Seneca Rocks, West Virginia. It was opened in 1960 under the
More informationModernisation of Shymkentcement Plant
Modernisation of Shymkentcement Plant October 2014 Table of Contents 1 Introduction 3 2 Shymkentcement Plant 3 2.1 Environmental performance of the existing plant 5 3 The new dry line 6 3.1 Overview of
More informationPyrometallurgy of iron is still the most important pyrometallurgical process economically.
1 Pyrometallurgy of iron is still the most important pyrometallurgical process economically. Prehistorically, iron was prepared by simply heating it with charcoal in a fired clay pot. Coke is coal that
More informationSAI SON CEMENT COMPANY DESCRIPTION PROCESS DESCRIPTION
SAI SON CEMENT Company Case Study SAI SON CEMENT COMPANY DESCRIPTION SAI SON CEMENT, a joint-stock company, was established in 1958 and located in Ha Tay province, west of Hanoi. Due to strong competition
More informationCEMENT PLANT ENVIRONMENTAL TECHNOLOGY FOR ACHIEVING HIGH SO 2 REMOVAL
CEMENT PLANT ENVIRONMENTAL TECHNOLOGY FOR ACHIEVING HIGH SO 2 REMOVAL Sara Safariyeganeh sara.safariyeganeh@mecsglobal.com Cary Joe Lovett, PE joe.lovett@holcim.com Abstract - The EPA has adopted revised
More informationThe Complete Technology Book on Asbestos, Cement, Ceramics and Limestone
The Complete Technology Book on Asbestos, Cement, Ceramics and Limestone Author: Dr. H. Panda Format: Paperback ISBN: 9788178331669 Code: NI297 Pages: 592 Price: Rs. 1,875.00 US$ 150.00 Publisher: Asia
More informationADVANTAGES AND DISADVANTAGES OF USE OF BRICK DUST AND FLY ASH AS A REPLACEMENT OF FINE AGGREGATES IN SELF COMPACTING CONCRETE
International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) Impact Factor: 5.22 (SJIF-2017), e-issn: 2455-2585 Volume 4, Issue 7, July-2018 ADVANTAGES AND DISADVANTAGES OF USE
More informationTechnical Presentation on Spent Pot lining Management & Red Mud
Technical Presentation on Spent Pot lining Management & Red Mud 0 Bharat Aluminium Company Ltd, Korba & Vedanta limited, Jharsuguda & Lanjigarh OUR PRESENCE 1 Jharsuguda Smelter Capacity 3,615 MW 1.75
More informationZP Series of Small, High-sensitivity Infrared Gas Analyzers
ZP Series of Small, High-sensitivity Infrared Gas Analyzers Yuki Masunaga Hideyuki Konishi Kozo Akao ABSTRACT Fuji Electric provides two types of infrared analyzers: small single beam types with a simple
More informationPelletizing technologies for iron ore
Pelletizing technologies for iron ore The Outokumpu partnership As one of the world s leading developers and suppliers of technology, Outokumpu Technology designs and delivers plants, processes and equipment
More informationDEVELOPMENT OF BLENDED CEMENT FROM ACTIVATED AND SINTERED FLY ASH
CHAPTER 6 DEVELOPMENT OF BLENDED CEMENT FROM ACTIVATED AND SINTERED FLY ASH 6.1. Activated Sintered Flyash as blending material for cement. Investigations have been made to develop flyash-blended cements
More informationProperties of Concrete. Properties of Concrete 1
Properties of Concrete Properties of Concrete 1 CE-203PROPERTIES OF Introduction CONCRETE Batching, Mixing, transportation and placing of concrete, Properties of fresh and hardened concrete, testing of
More informationApplication Note: Cement Industry Condition Monitoring of Rotating Machines
Application Note: Cement Industry Condition Monitoring of Rotating Machines Cement, ubiquitous binding material has stood tests of geography, climate and other factors in its usage over decades. Its application
More informationCement Manufacturing Page 1 10/12/2005 WP0003
Cement Manufacturing Page 1 10/12/2005 WP0003 Is it cement or is it concrete? Does it matter? Cement and concrete might mean the same thing to most of us, but there is a major difference in the two. In
More informationLime Cement Aggregates Mortar
Lime Cement Aggregates Mortar Lime Preparation of lime mortar Cement Ingredients Manufacturing process Types and Grades Properties of cement and Cement mortar Hydration Compressive strength Tensile strength
More informationCaCO 3 CaO + CO 2 MgCO 3 MgO + CO 2 CaCO 3 MgCO 3 CaO MgO + 2 CO 2 FeCO 3 FeO + CO 2 FeO + CO Fe +CO 2
A. Fundamentals 1. Introduction 1.1 Principle mechanism Shaft kilns and cupola furnaces are used for the mass conversion and melting of granular and coarse materials. The material is transported through
More informationL26942OR1949PLC000185
OCL INDIA LIMITED Regd. Office: At/Po/Ps: Rajgangpur, Dist: Sundargarh, Odisha-770017 CIN: L26942OR1949PLC000185 Tel. No. :(06624)221212, 220121 Website: www.ocl.in / www.oclindialtd.in, E-mail: ocl_rajgangpur@ocl.in
More informationWelcome to South Ferriby Cement Plant
Welcome to South Ferriby Cement Plant 1 A long tradition The Humber estuary village of South Ferriby has been making cement for nearly 70 years. Over that period, the industry has provided much needed
More informationComparison of Physical Properties of Various Brands of Cement, Fine Aggregate, Coarse Aggregate Including M-Sand Available from Local Market
Comparison of Physical Properties of Various Brands of Cement, Fine Aggregate, Coarse Aggregate Including M-Sand Available from Local Market Asst Prof. Parthiban.L Arun.S. Balakumar.S Boobalan. S. Francis.A
More informationCHAPTER 3 PROPERTIES OF MATERIALS
59 CHAPTER 3 PROPERTIES OF MATERIALS Concrete is made up of cement, fine aggregate (sand), coarse aggregate (stone chips) and water. It is important to know the properties of constituent materials, as
More informationUtilization of Coal Slurry Waste as an Alternative Raw Material in Portland Cement Clinker Production
Utilization of Coal Slurry Waste as an Alternative Raw Material in Portland Cement Clinker Production M. Ziypak 1, Z. Olgun 1, M. Turan 2, J. Erdogan 2, Y. Kilic 3, A. Sahin 3, M. Kara 3 1 Turkish Coal
More informationPerformance Analysis of Cement manufacturing Industry
www.ijecs.in International Journal Of Engineering And Computer Science ISSN:2319-7242 Volume 4 Issue 3 March 2015, Page No. 10937-10941 Performance Analysis of Cement manufacturing Industry Neeraj Pandagre
More information9/12/2018. Course Objectives MSE 353 PYROMETALLURGY. Prerequisite. Course Outcomes. Forms of Assessment. Course Outline
Kwame Nkrumah University of Science & Technology, Kumasi, Ghana MSE 353 PYROMETALLURGY Course Objectives Understand the fundamental concepts of pyrometallurgy Understand the concepts of materials and energy
More informationINDUSTRIAL ACCESSORIES COMPANY
INDUSTRIAL ACCESSORIES COMPANY Industrial Accessories Company is an industrial design/build and original equipment manufacturer of baghouses, flue gas desulfurization, heavy metal mitigating sorbent injection
More informationIndustrial Gas Analyzers in Applications Information
Industrial Gas Analyzers in Applications Information Engine and Diesel Testing www.eurotron.co.kr Thousands of internal combustion engines are located throughout the world. They range in size from small
More informationUtilization of micro silica as partial replacement of OPC & SRC in concrete
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 3, Issue 3(March 2014), PP.67-73 Utilization of micro silica as partial replacement of
More informationEffect of high temperature and type of cooling on some mechanical properties of cement mortar
Effect of high temperature and type of cooling on some mechanical properties of cement mortar Faisal Abdulhussei 1, Waleed Abbas 2 and Qais Frayyeh 2, * 1 Madenat al-elem University College, Baghdad, Iraq
More informationPYROMETALLURGY OF IRON
Kwame Nkrumah University of Science & Technology, Kumasi, Ghana Pyrometallurgy of Iron Common sources of iron-bearing ores: PYROMETALLURGY OF IRON Oxide Ores Stoicheometry Iron Content (wt%) Magnetite
More informationExploring the Chemical Properties and Performance Results of Sustainable Solidia Cement and Solidia Concrete
Exploring the Chemical Properties and Performance Results of Sustainable Solidia Cement and Solidia Concrete 1 1 Nicholas DeCristofaro, Ph.D., 2 Sada Sahu, Ph.D., 1 Chief Technology Officer, Solidia Technologies
More informationCharacteristics of waste streams and requirements for recycling processes Executive summary
FOSTERING INDUSTRIAL SYMBIOSIS FOR A SUSTAINABLE RESOURCE INTENSIVE INDUSTRY ACROSS THE EXTENDED CONSTRUCTION VALUE CHAIN Characteristics of streams and requirements for recycling processes Executive summary
More informationHOT ABRASION RESISTANCE OF SOME LOW CEMENT CASTABLES Dr. Sankar Kannabiran CTO- HÖGÄNAS /Borgestad Industries- SWEDEN Presented in IRE UK- conference
HOT ABRASION RESISTANCE OF SOME LOW CEMENT CASTABLES Dr. Sankar Kannabiran CTO- HÖGÄNAS /Borgestad Industries- SWEDEN Presented in IRE UK- conference SCOPE HOT ABRASION TESTS- CONTENTS BACKGROUND AND STANDARDS
More informationVCAS White Pozzolans
VCAS White Pozzolans Custom-engineered, high performance, pozzolanic mineral additives for use in white cement, mortar, and concrete products Technical Data Summary VCAS-micronHS VCAS-8 September 13, 2005
More informationCEMENT, LIME AND MAGNESIUM OXIDE
IMPEL PROJECT: ENERGY EFFICIENCY IN PERMITTING AND INSPECTION, EXCHANGE OF EXPERIENCES ON HOW THE ISSUES OF ENERGY EFFICIENCY AND REDUCTION OF GREENHOUSE GASES ARE DEALT WITH IN PERMIT PROCEDURES AND INSPECTIONS
More informationParticle Size and Shape Analysis in CEMENT INDUSTRY.
Particle Size and Shape Analysis in CEMENT INDUSTRY Generalities Cement is made from a mixture of limestone (CaCO 3 ) and clay (silica and alumina) and minority constituents such as iron oxide in a rotary
More information4.1 Introduction 4.2 Kiln System. 4.3 Kiln System Analysis 4.4 Results and Discussion 4.5 Conclusion
ENERGY AND EXERGY ANALYSIS OF THE KILN SYSTEM IN THE CEMENT PLANT 4 Contents 4.1 Introduction 4.2 Kiln System. 4.3 Kiln System Analysis 4.4 Results and Discussion 4.5 Conclusion 4.1 Introduction The conservation,
More informationManufacture of Pig Iron Concentration Calcination Smelting Blast furnace Chemistry of reactions in Blast furnace. 15CY101: Chemistry SRM University 2
Manufacture of Pig Iron Concentration Calcination Smelting Blast furnace Chemistry of reactions in Blast furnace. 15CY101: Chemistry SRM University Iron is very reactive and is found in nature in form
More informationProperties of Concrete. Properties of Concrete. Properties of Concrete. Properties of Concrete. Properties of Concrete. Properties of Concrete
CIVL 1112 Contrete Introduction from CIVL 1101 1/10 Concrete is an artificial conglomerate stone made essentially of Portland cement, water, and aggregates. While cement in one form or another has been
More informationVTU NOTES QUESTION PAPERS NEWS RESULTS FORUMS Concrete Technology
Concrete Technology Definition: Cement is defined in many ways as follows, Cement, any material that hardens and becomes strongly adhesive after application. Manufactured substance consisting of gypsum
More informationREFRACTORIES. Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks
Topics REFRACTORIES Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks Definition Substances which can with stand high temperature without
More informationSupplementary Cementitious Materials (SCMs) Cement Hydration: 3/29/2017. SCMs effect on hydration. Hydration Schematic
Supplementary Cementitious Materials (SCMs) Ohio Precast Concrete Association March 2017 Meeting Jay Whitt Lehigh Cement Technical Services Engineer Supplementary Cementitious Materials (SCMs) Cement Hydration:
More informationDr. Ali Kadhim. Bricks
Bricks Classification of bricks according to constituent raw material: 1. Clay bricks 2. Lime sand bricks 3. Concrete bricks 1. Clay bricks: 1.1 Raw materials: a. Alumina Alumina is main constituent of
More informationEttringite revisited. Fred Glasser University of Aberdeen Old Aberdeen, Scotland UK
Ettringite revisited Fred Glasser University of Aberdeen Old Aberdeen, Scotland UK Ettringite (1) Since its discovery in nature and its subsequent identification as a minor phase in hydrated Portland cement,
More informationINTRODUCING FLY ASH INTO READY MIXED CONCRETE
INTRODUCING FLY ASH INTO READY MIXED CONCRETE CONTENTS Introduction Nature of Fly Ash Production Fly Ash Classification Benefits of Fly Ash on Concrete Fresh Concrete Properties Hardened Concrete Properties
More informationFully Integrated Simulation of a Cement Plant with a Carbon Capture Ca-looping Process
Fully Integrated Simulation of a Cement Plant with a Carbon Capture Ca-looping Process Dursun Can Ozcan, Hyungwoong Ahn, Stefano Brandani Institute for Materials and Processes School of Engineering University
More informationChemicals from Limestone
Chapter 5 Chemicals from Limestone The next major raw material for which we discuss the derived chemicals is calcium carbonate, common limestone. It is the source of some carbon dioxide, but, more importantly,
More informationEffect of Nano-Sized Fe 2 O 3 on Microstructure and Hydration Resistance of MgO-CaO Refractories
Int. J. Nanosci. Nanotechnol., Vol. 12, No. 1, March. 2016, pp. 19-26 Effect of Nano-Sized Fe 2 O 3 on Microstructure and Hydration Resistance of MgO-CaO Refractories S. G. Kahrizsangi*, A. Nemati, A.
More informationLECTURE NO. 10 & 11 (Part II) MINERAL ADMIXTURES
Objectives: LECTURE NO. 10 & 11 (Part II) MINERAL ADMIXTURES To introduce the mineral admixtures By: Dr. Shamshad Ahmad To explain in detail fly ash and silica fume used as mineral admixtures INTRODUCTION
More informationMATHEMATICAL MODELLING OF THE CEMENT CLINKER BURNING PROCESS
MATHEMATICAL MODELLING OF THE CEMENT CLINKER BURNING PROCESS Dr. sc. techn. G. Locher, Dipl.-Ing. H. Klein Verein Deutscher Zementwerke e. V., Tannenstraße 2, 40476 Düsseldorf, Germany Summary The mathematical
More informationMoisture Removing & Increasing Efficiency in Ball Mill
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 06, 2015 ISSN (online): 2321-0613 Moisture Removing & Increasing Efficiency in Ball Mill Abstract Ball mill is used to
More informationPresented at the14th International Congress on the Chemistry of Cement. Beijing, China. October 2015
CO 2 -Reducing Cement Based on Calcium Silicates Presented at the14th International Congress on the Chemistry of Cement Beijing, China October 2015 S. Sahu 1 *, S. Quinn 1, V. Atakan 1, N. DeCristofaro
More informationSTATEMENT OF BASIS. Cheney Lime & Cement Company Landmark Plant Alabaster, Alabama Shelby County Facility No
STATEMENT OF BASIS Cheney Lime & Cement Company Landmark Plant Alabaster, Alabama Shelby County Facility No. 411-0019 This proposed Title V Major Source Operating Permit (MSOP) renewal is issued under
More informationIn conjunction with MJAC Midland Joint Advisory Council for Environmental Protection. Present. Advanced Module IV
In conjunction with MJAC Midland Joint Advisory Council for Environmental Protection Established 1928 Present Advanced Seminar IV Taking Legal Action Advanced Module IV Session 2 Introduction to Ferrous
More informationImprovements in Material Handling: A Case Study of Cement Manufacturing Plant
Vol:5, No:3, 21 Improvements in Handling: A Case Study of Cement Manufacturing Plant A. Pancharya International Science Index, Industrial and Manufacturing Engineering Vol:5, No:3, 21 waset.org/publication/12945
More informationCLEANER PRODUCTION OPPURTUNITIES CEMENT MANUFACTURING SECTOR
CLEANER PRODUCTION OPPURTUNITIES IN CEMENT MANUFACTURING SECTOR 1 P a g e Indian Scenario of Cement Manu nufacturing Industries: The Indian cement industry is the 2nd largest market after China accounting
More informationPresent challenges for modern Cement Plants. Arturo Abarca, REFRATECHNIK México S.A. de C.V. XXVII Technical Congress FICEM-APCAC
Present challenges for modern Cement Plants Arturo Abarca, REFRATECHNIK México S.A. de C.V. XXVII Technical Congress FICEM-APCAC Agenda Energy-Efficiency CO 2 -Emissions Clinker Cement Summary / Discussion
More informationUNIT- 6 PRINCIPLES AND PROCESSES OF EXTRACTION OF METALS.
UNIT- 6 PRINCIPLES AND PROCESSES OF EXTRACTION OF METALS. I. ONE MARK QUESTIONS: 1. Name an important ore of Aluminium. Ans: Bauxite 2. Give the composition of copper pyrites. A: CuFeS2 3. What is meant
More informationINNOVATION IN ENERGY CONSUMPTION
INNOVATION IN ENERGY CONSUMPTION SYNOPSIS In the cement industry, during the last few years there has been a steep rise in the cost of production as the cost of energy inputs has increased sharply. Studies
More informationEFFECTS ON SETTING, STRENGTH AND WATER RESISTANCE OF SOREL CEMENT ON MIXING FLY ASH AS AN ADDITIVE
Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 2, April, 2014 2014 IJMERR. All Rights Reserved EFFECTS ON SETTING, STRENGTH AND WATER RESISTANCE OF SOREL CEMENT ON MIXING FLY ASH AS AN ADDITIVE
More informationLecture 35. NPK Fertilizers Nitrophosphate Route
Lecture 35 NPK Fertilizers Nitrophosphate Route Phosphate sources must be converted into a form which can be taken up by plants ( available ). This can be achieved by using the integrated Nitrophosphate
More informationModule: 8 Lecture: 36
Module: 8 Lecture: 36 TRIPLE SUPERPHOSPHATE INTRODUCTION Triple superphosphate (TSP) is the more concentrated fertilizer than ordinary superphosphate, containing from 44 to 51% of available P2O5 or nearly
More informationAdmixtures. Lecture No. 12
Admixtures Lecture No. 12 Artificial Pozzolans Fly ash Blast Furnace Slag Silica Fume Rice Husk ash Metakaoline Surkhi. Fly Ash Fly ash is finely divided residue resulting from the combustion of powdered
More informationThe Fortunes of Bauxite Alumina Part 2 By Dmitri Allicock - for Guyanese Online. The Opening of the Alumina Plant in 1961
The Fortunes of Bauxite Alumina Part 2 By Dmitri Allicock - for Guyanese Online The Opening of the Alumina Plant in 1961 The Alumina Plant opened Tuesday, March 28, 1961. Minister of Trade and Industry,
More informationFINAL TECHNICAL REPORT November 1, 1998, through October 31, 1999
FINAL TECHNICAL REPORT November 1, 1998, through October 31, 1999 Project Title: USE OF HIGH-CARBON ILLINOIS COAL FLY ASH IN PORTLAND CEMENT MANUFACTURING ICCI Project Number: Principal Investigator: Other
More informationFour Principal Families of Limes and Cements. Natural Hydraulic Limes. Pure Lime. Natural. Cement. Portland. Cement HIGH TEMPERATURE FIRING (1450 C)
Natural Hydraulic Limes HYDRATION AND CARBONATION CARBONATION Hydraulic Lime Hydrate Pure Lime Putty Limestone + Clay mixture Impure Limestones Pure Limestone Pure Lime SLAKING Pure Quicklime MODERATE
More informationIMPROVEMENT OF CONCRETE DURABILITY BY COMPLEX MINERAL SUPER-FINE POWDER
277 IMPROVEMENT OF CONCRETE DURABILITY BY COMPLEX MINERAL SUPER-FINE POWDER Chen Han-bin, Chen Jian-xiong, Xiao Fei, and Cui Hong-ta College of Material Science, Chongqing University, Chongqing, PRC Abstract
More informationPALM KERNEL HUSK ASH (PKHA) AS AN ADMIXTURE (ACCELERATOR) IN CONCRETE
PALM KERNEL HUSK ASH (PKHA) AS AN ADMIXTURE (ACCELERATOR) IN CONCRETE A.W. Otunyo Department of Civil & Environmental Engineering, University of Port Harcourt, P.M.B. 5323, Port Harcourt, Nigeria. Email:
More informationBRICKS MANUFACTURING PROCESS & TYPES OF BRICK APRIL 1 ST 2018
BRICKS MANUFACTURING PROCESS & TYPES OF BRICK APRIL 1 ST 2018 DEFINITION OF BRICK A brick is building material used to make walls, pavements and other elements in masonry construction. A brick can be composed
More informationLecture ( 2 ) Clay Brick. Bricks. Classification of Bricks
Bricks One of the oldest building material brick continues to be a most popular and leading construction material because of being cheap, durable and easy to handle and work with. Clay bricks are used
More informationEffective Utilization of Fly-Ash
24 th Jan, 2013 in Mongolia under the framework of NAMAs Effective Utilization of Fly-Ash from Power Plant for Cement Production YOSHIYUKI UENOYAMA General Manager Green-Innovation Business Promotion Department
More informationCEMENT TECHNOLOGY. No. SAMRS/2009/09/02
SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA FACULTY OF CHEMICAL AND FOOD TECHNOLOGY Institute of Inorganic Chemistry, Technology and Materials CEMENT TECHNOLOGY REPORT ON TRAINING VISIT In the frame
More informationSilica Fume in Concrete
Silica Fume in Concrete Silica Fume... Very fine noncrystalline silica produced in electric arc furnaces as a byproduct of the production of elemental silicon or alloys containing silicon; also known as
More informationSUMMARY LECTURE ON CONCRETE: STRUCTURE AND PROPERTIES
UNIVERSITY OF WASHINGTON DEPARTMENT OF CONSTRUCTION MANAGEMENT CM 425 CONCRETE TECHNOLOGY Winter Quarter 2015 Professor Kamran M. Nemati SUMMARY LECTURE ON CONCRETE: STRUCTURE AND PROPERTIES CM 425 Concrete
More informationRaman Mangabhai reviews some developments in cements
Raman Mangabhai reviews some developments in cements Concrete is the most widely consumed man-made material in the world. The production of cement is responsible for 3-5% of total global carbon emissions
More information6 Cement Manufacturing Industry
6 Cement Manufacturing Industry 1. The Cement Industry Cement Production Cement is a basic material for building and civil engineering construction. Output from the cement industry is directly related
More informationESTABLISHED TECHNIQUES OF ANALYSIS
The Analysis of Mortar The Past 20 Years Peter Ellis Where historic buildings are concerned, repairs should be carried out using materials and techniques which match those used originally as closely as
More informationFLYASH BRICKS 1. INTRODUCTION 2. PRODUCTS AND ITS APPLICATION. Profile No.: 17 NIC Code: 23921
Profile No.: 17 NIC Code: 23921 FLYASH BRICKS 1. INTRODUCTION Fly Ash Bricks are manufactured using Major percentage of fly ash generated from Thermal Power stations. Other raw materials used along with
More information