C27200 CuZn37 Industrial Rolled

Size: px
Start display at page:

Download "C27200 CuZn37 Industrial Rolled"

Transcription

1 C272 Alloy Designation EN DIN CEN/TS (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order to meet our customer s needs for industrial manufacturing or for the production of gift articles and decorative objects. Chemical Composition Weight percentage Cu % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic equipments and 22/53/CE for automotive industry Characteristics is the major brass alloy for the cold forming process. Even though brasses with lower Zinc content have better cold forming properties, is the most used alloy. Reasons for this are on the one hand economical due to lower price of Zinc compared to Copper, on the other hand the forming properties of this alloy meet the demand of many applications. Main Applications Fasteners Fasteners. Industrial Cold Headed Parts, Heat Exchanger Shells, Pump Cylinder Liners Casting Characteristics. Typical Application: Metal goods, Deep drawn parts, Components for the electrical industry, Stamped parts, Connectors. Preferred Applications Jewellery and Metall Goods Deep Drawn Parts Components for the Electrical Industry Stamped Parts xx xx xx xx x x = well suited xx = particularly well suited Connectors Physical Properties Typical values in annealed temper at 2 C Density 8.44 g/cm³ Thermal expansion coefficient - 73 C C /K 1-6 /K Specific heat capacity.377 J/(g K) Thermal conductivity 121 W/(m K) Electrical conductivity (1 MS/m = 1 m/(ω mm²) 14 MS/m Electrical conductivity (IACS) 24 % Thermal coefficient of electrical resistance (.. 1 C) /K Modulus of elasticity ( 1 GPa = 1 kn/mm²) cold formed annealed GPa GPa Page 1

2 C272 Mechanical Properties (EN 1652) R3 G1 Annealed G2 Annealed G3 Annealed G5 Annealed Tensile Strength Rm Yield Strength Rp.2 * Elongation Minimum A 5mm Grain Size Hardness MPa MPa % µm HV < R R R R > 17 R > 19 * only for information HV * E. Conductivity [MS/m] Electrical Conductivity Fabrication Properties* Cold Forming Properties Max. 9% between annealings Hot Forming Properties at C Machinability (Rating 3) Electroplating Properties Hot Tinning Properties Soft Soldering, Brazing Resistance Welding Gas Shielded Arc Welding Laser Welding R3 R35 R41 R48 R55 R63 Good Fair Good Fair Less Suitable Soft Annealing C Stress Relieving Annealing C * For more details call our technical service Electrical conductivity is strongly influenced by chemical composition. A high level of cold deformation and small grain size decrease the electrical conductivity moderately. Minimum conductivity level can be specified. Corrosion Resistance* Resistant to: ha s a good resistance to water, water vapour, different saline solutions, many organic liquids. Land, sea and industrial atmosphere. Not resistant to: Under certain conditions (water with high chlorine-content and low carbonate-hardness) a form of corrosion called dezincification can occur. Furthermore this alloy tends in cold-formed temper under internal and/or external tensile stress when aggressive agents like ammoniac, amine ammonia-salts are present to stress corrosion cracking. Tensile stress can be applied after fabrication during assembly or installation. A heat treatment can help to avoid stress corrosion cracking. Semi-finished products can get a stress relieving annealing treatment or softening treatment. * For more details call our technical service Page 2

3 C272 Bending Properties Thickness:.5 mm relative Bending Radius R/T bending edge transvers to rolling direction bending edge in rolling direction 9 Bending Bending test according to EN ISO 7438 is done with 1 mm wide samples. Smaller samples in general as well as lower thickness allow a lower bending radius without cracks. If needed we supply bending optimized temper classes that far exceed standard quality. Please take care when comparing with ASTM E 29 results, there the bend definition direction is contradictory. Bending Definition R3 R35 R41 R48 R55 R63 Transverse = good way = bad way relative Bending Radius R/T bending edge transvers to rolling direction bending edge in rolling direction 18 Bending R3 R35 R41 R48 R55 R63 Bending Properties* Thicknes s Range Transvers Bending 9 Bending 18 Transvers mm R/T R/T R/T R/T R27.5 R35.5 R R R Transverse 18 Transverse Minimum Bending Radius Calculation To find out the minimum possible bending radius take the R/T value from the list. Example: R/T =.5 and thickness.3 mm Minimum radius = (R/T) x thickness =.5 x.3 mm =.15 mm R * Measured at sample width 1 mm according to EN 1654 Possible bending radius = (R/T) x thickness Page 3

4 C272 Softening Resistance Vickers Hardness HV Vickers Hardness HV Time [s] Time [s] R41 at 4 C R41 at 5 C R41 at 6 C R55 at 4 C R55 at 5 C R55 at 6 C After short time heat treatment Vickers Hardness is measured. The diagram shows typical values. Bend Fatigue (at room temperature) The fatigue strength gives an indication about the resistance to variations in applied tension. It is measured under symmetrical alternating load. The maximum bending load for 1 7 load cycles without crack is measured. Dependent on the temper class it is approximately 1/3 of the tensile strength R m. Standards for copper and copper alloys EN 1652 EN 1654 EN 1758 EN EN EN Plate, sheet, strip and circles for general purposes Strip for springs and connectors Strip for lead frames Hot-dip tinned strip Copper plate, sheet and strip for electrical purposes Electrolytically tinned strip Page 4

5 C272 Relaxation Properties values from CuZn3 Thermal stress relieved, is about much less resistant R65 1 C R65 15 C R65 2 C R65 1 C R65 15 C R65 2 C R65 1 C R65 15 C R65 2 C R65 1 C R65 15 C R65 2 C % of Rp.2 5% of Rp.2 Transverse 8% of Rp.2 8% of Rp.2 Transverse Stress relaxation is tested with cantilever bending test equipment. This method is taking short time relaxation into account. so that the values achieved are very realistic, while other test methods like tube test pretend better properties from the achieved values. Relaxation values give an indication about stress relieve of strip under tension for a certain time and temperature. As it is measured on plain strip. the behaviour of deformed parts may differ. nevertheless the ratio between the different tempers remains the same. Typical test sample thickness is.3.6 mm. Page 5

6 C272 Brass Processing KME Alloy Machining Mechanical Polishing Electro Polishing 35 CuZn CuZn CuZn CuZn CuZn CuZn CuZn CuZn CuZn39Pb CuZn CuSn3Zn9 CuSn2Zn1 Brazing Gas Welding Gas Shielded Arc Welding = excellent 2 = good 3 = fair 4 = less suitable Resistance Welding Laser Welding Phase Diagram Copper Zink (after Struers Scientific Instruments) Page 6 _15_8_217

C27000 CuZn36 Industrial Rolled

C27000 CuZn36 Industrial Rolled C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with

More information

C26800 CuZn33 Industrial Rolled

C26800 CuZn33 Industrial Rolled C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE

More information

Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³

Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³ Alloy Designation High Performance STOL Alloys EN CW 117 C* DIN CEN/TS 13388 UNS * chemical composition of STOL 8 has a higher Sn content up to,2 % We have developed a wide range of high performance alloys

More information

C26800 CuZn33 Industrial Rolled

C26800 CuZn33 Industrial Rolled Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition percentage C268 Cu 67 % Zn Rest % This alloy is in accordance with RoHS 22/96/CE for electric & electronic equipments

More information

Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.

Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17. Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition Weight percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric &

More information

High Performance Alloys. Characteristics

High Performance Alloys. Characteristics Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition Weight percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,

More information

C51100 CuSn4 Industrial Rolled

C51100 CuSn4 Industrial Rolled Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS

More information

High Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³

High Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³ Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Rest % Ni 3 % Si.65 % Mg.15 % This alloy is in accordance with RoHS 22/96/CE for electric &

More information

C22000 CuZn10 Industrial Rolled

C22000 CuZn10 Industrial Rolled Alloy Designation EN DIN CEN/TS 13388 JIS BS CW501L Brass Rolled Products UNS Chemical Composition percentage C22000 Cu 90 % Zn Rest % This alloy is in accordance with RoHS 2002/96/CE for electric & electronic

More information

CuSn0,15 (STOL 81) C14415 Industrial Rolled

CuSn0,15 (STOL 81) C14415 Industrial Rolled Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties

More information

Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.

Industrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17. Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic

More information

High Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)

High Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K) Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy

More information

High Performance Alloys. Characteristics

High Performance Alloys. Characteristics Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,

More information

C26000 CuZn30 Industrial Rolled

C26000 CuZn30 Industrial Rolled Alloy Designation EN DIN CEN/TS 13388 (2.265) CW55A JIS C 26 BS CZ 16 UNS C26 (Cartridge brass, 7%) Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets

More information

Bronze Rolled Products. Characteristics

Bronze Rolled Products. Characteristics Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW453K JIS C 5210 BS PB 104 UNS Chemical Composition Weight percentage Cu C52100 Rest Sn 8 % P 0.1 % This alloy is in accordance with RoHS 2002/96/CE

More information

Characteristics. Current carrying Capacity. Density 8.85 g/cm³. Thermal expansion coefficient C /K

Characteristics. Current carrying Capacity. Density 8.85 g/cm³. Thermal expansion coefficient C /K Alloy Designation STOL 94 High Performance STOL Alloys EN CuNi2,5SiZn DIN CEN/TS 13388 UNS Chemical Composition percentage Cu # Rest % Ni 1... 4. % Si.8.. 1. % Zn max. 2. % Sn max. 1. % Ag max..5 % Mg

More information

Cu-ETP C11000 Industrial Rolled

Cu-ETP C11000 Industrial Rolled Alloy Designation Copper Rolled Products EN DIN CEN/TS 13388 Cu-ETP (E-Cu, E-Cu58) CW004A JIS C 1100 UNS We produce a vast assortment of copper rolled products with highest purity in various in chemical

More information

Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)

Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.

More information

Copper & Copper Alloys CuZn38As (OF 2765)

Copper & Copper Alloys CuZn38As (OF 2765) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2

More information

Copper & Copper Alloys CuZn40Pb2 (OF 2357)

Copper & Copper Alloys CuZn40Pb2 (OF 2357) Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2

More information

Aircraft. Automotive. Electronic. Oil and Gas

Aircraft. Automotive. Electronic. Oil and Gas 4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic

More information

Copper & Copper Alloys CuZn31Si1 (OF 2270)

Copper & Copper Alloys CuZn31Si1 (OF 2270) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.

More information

Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)

Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291) Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.

More information

Copper & Copper Alloys CuNi1Si (OF 2403)

Copper & Copper Alloys CuNi1Si (OF 2403) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2

More information

Copper & Copper Alloys CuZn38Pb2 (OF 2361)

Copper & Copper Alloys CuZn38Pb2 (OF 2361) Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information

More information

Copper & Copper Alloys

Copper & Copper Alloys Copper and Copper Alloys Page 1 of 6 No responsibility is taken for the correctness of this information 12/2016 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.

More information

Brass Alloy SM Chemical Composition. Dimensions. Physical Properties. Technical Data Sheet Alloys. Density kg/m Melting temperature

Brass Alloy SM Chemical Composition. Dimensions. Physical Properties. Technical Data Sheet Alloys. Density kg/m Melting temperature Chemical Composition Comparable standards ISO: CuZn33 ASTM: UNS 26800 EU: CW 506L JIS: C2680 Element Unit Range Copper % 64-68.5 Lead % max. 0.05 Iron % max. 0.05 Zinc - remainder Dimensions Nominal width

More information

UNS:C70250, C70320 EN:CW112C

UNS:C70250, C70320 EN:CW112C Rendering date: 2018-02-01 13:53:55 http://conductivity-app.org CuNi3Si UNS:C70250, C70320 EN:CW112C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi3Si (SB26) KM Europa

More information

Material Specification

Material Specification Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength

More information

ENGINEERING COPPER SOLUTIONS. Connector Strip Materials. Strips of copper and copper alloys

ENGINEERING COPPER SOLUTIONS. Connector Strip Materials. Strips of copper and copper alloys ENGINEERING COPPER SOLUTIONS Connector Strip Materials Strips of copper and copper alloys Revision: 01 / 2015 Overview 1. KME Group 1.1. KME in short 1.2. Product portfolio 1.3. Production and sales locations

More information

ENGINEERING COPPER SOLUTIONS. Connector Strip Materials. Strips of copper and copper alloys

ENGINEERING COPPER SOLUTIONS. Connector Strip Materials. Strips of copper and copper alloys ENGINEERING COPPER SOLUTIONS Connector Strip Materials Strips of copper and copper alloys Revision: 01 / 2015 Overview 1. KME Group 1.1. KME in short 1.2. Product portfolio 1.3. Production and sales locations

More information

CuZn20 C24000 Industrial Rolled

CuZn20 C24000 Industrial Rolled Alloy Designation Brass Rolled Products EN DIN CEN/TS 13388 JIS C 2400 BS UNS KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order to meet our customer s needs

More information

C Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date:

C Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date: Copper Alloy Data C17510 C17510 Tradename: Beryllium Copper Designation: Active? True Inactive Date: US EPA Registered Antimicrobial? True Chemical Composition Element Cu (1,2) Fe Ni Al Be Co Si Min (%)

More information

T :

T : Aluminium Stock www.cncdirect.co.nz T : +64 9 622 2169 www.highgrademetals.co.nz About CNC Direct Limited was established by David Thumath in 2007 to supply quality well priced machine tools into the New

More information

Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.

Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS. ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.

More information

CuSn0,5 UNS:C18835 EN:CW129C. Rendering date: :32:23

CuSn0,5 UNS:C18835 EN:CW129C. Rendering date: :32:23 Rendering date: 2018-09-26 21:32:23 http://conductivity-app.org CuSn0,5 UNS:C18835 EN:CW129C CuSn(CuSn0,2 - CuSn0,5) material with 0,2-0,55% is tin addition id single phase copper alloy with good mechanical

More information

Industrial Rolled Copper and Copper Alloy Products

Industrial Rolled Copper and Copper Alloy Products KME Germany GmbH & Co. KG Copper and Copper Alloy Products [EN] Industrial Rolled Copper and Copper Alloy Products KME Germany GmbH & Co. KG KME and copper Our modern world would be impossible without

More information

Industrial Rolled. High Performance Alloys. Characteristics

Industrial Rolled. High Performance Alloys. Characteristics Page 1 Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Min. 96.2 % Ni 2.2.. 4.2 % Si.25.. 1.2 % Mg.5...3 % Zn Max. 1. Others remainder % This

More information

SANDVIK NANOFLEX STRIP STEEL

SANDVIK NANOFLEX STRIP STEEL SANDVIK NANOFLEX STRIP STEEL DATASHEET Sandvik Nanoflex is a precipitation hardening, austenitic stainless steel specifically designed for applications requiring high strength and good ductility. Mechanical

More information

CDA ASTM ASARCON SAE AMS FEDERAL MILITARY OTHER

CDA ASTM ASARCON SAE AMS FEDERAL MILITARY OTHER Product Description: Cartridge Brass, 70% Tempers: H01 Quarter Hard, H02 Half Hard, H04 Hard Solids: 3 8" to 2 1 2" OD Hex: 3 8" to 2" OD Rectangles: Consult Mill Standard Lengths: 144" Wrought Wrought

More information

The Development of a High Electrical Conductivity and High Heat Resistance Copper Alloy EFTEC-550

The Development of a High Electrical Conductivity and High Heat Resistance Copper Alloy EFTEC-550 The Development of a High Electrical Conductivity and High Heat Resistance Copper Alloy EFTEC-55 Yoshito Fujii *, Ryosuke Matsuo *, Masaru Higuchi * With coming of the next generation automotive technology

More information

Sandvik 316 (Plate and sheet)

Sandvik 316 (Plate and sheet) Datasheet updated 2014 01 29 12:21:53 (supersedes all previous editions) Sandvik 316 (Plate and sheet) Sandvik 316 is a molybdenum alloyed austenitic chromium nickel steel. STANDARDS ASTM 316 UNS S31600

More information

We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars

We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars EXTRUDED RODS INTRODUCTION` We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars in different shapes like round, hex, square, rectangular & flat. We

More information

The lead-free machining brass

The lead-free machining brass The lead-free machining brass Company profile The Wieland Group, with headquarters in the southern German city of Ulm, is one of the world s leading manufacturers of semi-finished and special products

More information

ARCAP AP1D AP1D lb/in³ 8.8 g/cm³ 240 Ohm circ mil/ft 40 microohm cm 212 F 572 F 932 F 1112 F 1832 F 100 C 300 C 500 C 600 C 1000 C

ARCAP AP1D AP1D lb/in³ 8.8 g/cm³ 240 Ohm circ mil/ft 40 microohm cm 212 F 572 F 932 F 1112 F 1832 F 100 C 300 C 500 C 600 C 1000 C Identification VMI No. UNS No. Relevant Specifications Forms Description ARCAP C76350 n/a Strip Wire Bar Sheet Free Cutting bar and wire. Chemical Composition (%) Copper (+Silver) 61 Nominal Nickel (+Cobalt)

More information

SANDVIK SPRINGFLEX STRIP STEEL

SANDVIK SPRINGFLEX STRIP STEEL SANDVIK SPRINGFLEX STRIP STEEL DATASHEET Sandvik Springflex is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance. Sandvik Springflex

More information

VDM Alloy 80 A Nicrofer 7520 Ti

VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.

More information

STANDARD FERRITIC STAINLESS STEELS

STANDARD FERRITIC STAINLESS STEELS T e c h n i c a l B r o c h u r e STANDARD FERRITIC STAINLESS STEELS Unity AISI UNS EN U-40910 409 S40910 1.4512 U-430 430 S43000 1.4016 U-430DDQ 430 S43000 1.4016 U-439 439 S43035 1.4510 - S43940 U-1.4509

More information

Denne side er kun tilgængelig på Engelsk Sandvik 13RM19 (Strip steel)

Denne side er kun tilgængelig på Engelsk Sandvik 13RM19 (Strip steel) Datablad opdateret 2013 11 27 08:40:15 (afløser alle tidligere versioner) Denne side er kun tilgængelig på Engelsk Sandvik 13RM19 (Strip steel) Sandvik 13RM19 is a stainless spring steel combining high

More information

1.0 Introduction David Chapman

1.0 Introduction David Chapman 1. Introduction David Chapman 1.1. About this Guide Busbars are used within electrical installations for distributing power from a supply point to a number of output circuits. They may be used in a variety

More information

SANDVIK SPRINGFLEX STRIP STEEL

SANDVIK SPRINGFLEX STRIP STEEL SANDVIK SPRINGFLEX STRIP STEEL DATASHEET Sandvik Springflex is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance. Sandvik Springflex

More information

SANDVIK 11R51 STRIP STEEL

SANDVIK 11R51 STRIP STEEL SANDVIK 11R51 STRIP STEEL DATASHEET Sandvik 11R51 is an austenitic stainless steel with excellent spring properties that in most cases fulfill demands regarding corrosion resistance, mechanical strength,

More information

EOS Aluminium AlSi10Mg

EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data for parts built using powder (EOS art.-no. 9011-0024)

More information

Custom 450 Stainless Steel, UNS S45000

Custom 450 Stainless Steel, UNS S45000 Custom 450 Stainless Steel, UNS S45000 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire Specifications: AMS5763, AMS 5773, AMS 5863, ASTM A 564, ASTM A693, ASTM A 959 Custom 450 Alloy Description

More information

Strip for connectors

Strip for connectors Strip for connectors REQUIREMENTS TO THE COPPER BASE MATERIAL COPPER AND COPPER ALLOYS FOR A WIDE VARIETY OF CONNECTORS Connection technology for electronic components has to fulfill various tasks using

More information

SANICRO 30 TUBE AND PIPE, SEAMLESS

SANICRO 30 TUBE AND PIPE, SEAMLESS SANICRO 30 TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 30 is a low-carbon version of Alloy 800 austenitic nickel-iron-chromium alloy. The grade is used for steam generator tubing in nuclear stations (PWR)

More information

ATI 201 HP /ATI 201L HP

ATI 201 HP /ATI 201L HP Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni

More information

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark)

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark) INVR CONTROLLED EXPNSION LLOYS (lloy developed by Imphy in 1896. Registered trademark) INTRODUCTION Invar is a Fe-Ni alloy with a 36% nickel content that exhibits the lowest expansion of known metals and

More information

UNS:C70260, C64700 EN:CW111C

UNS:C70260, C64700 EN:CW111C Rendering date: 2017-12-01 16:18:32 http://conductivity-app.org CuNi2Si UNS:C70260, C64700 EN:CW111C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi2Si (SB22) Wieland-Werke

More information

SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS

SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS SANDVIK 3R12 FOR MEDICAL APPLICATIONS TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R12 is an austenitic stainless chromium-nickel steel with a low carbon content used for medical and dental instruments.

More information

COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds

COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6

More information

SANDVIK 3R60 TUBE AND PIPE, SEAMLESS

SANDVIK 3R60 TUBE AND PIPE, SEAMLESS SANDVIK 3R60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R60 is an austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content. Sandvik 3R60 is also available in a variant for

More information

ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)

ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825) ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper

More information

C Si Mn Cr Mo Cu Ni P S

C Si Mn Cr Mo Cu Ni P S 1 General presentation: is a re-sulphurised ferritic stainless steel containing 12% chromium and an addition of silicon. This grade, which was developed for magnetic applications, has high permeability

More information

SANDVIK 6R44 TUBE AND PIPE, SEAMLESS

SANDVIK 6R44 TUBE AND PIPE, SEAMLESS SANDVIK 6R44 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 6R44 is an austenitic, niobium-stabilized stainless chromium-nickel steel for use at temperatures up to 850 C (1560 F). STANDARDS ASTM: TP347, TP347H

More information

Born from fire, made to endure NICKEL ALLOYS

Born from fire, made to endure NICKEL ALLOYS Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster

More information

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark)

INVAR CONTROLLED EXPANSION ALLOYS. (Alloy developed by Imphy in Registered trademark) INVR CONTROLLD XPNSION LLOYS (lloy developed by Imphy in 1896. Registered trademark) INTRODUCTION INVR is a Fe-Ni alloy with a 36% nickel content that exhibits the lowest expansion of known metals and

More information

SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS

SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS SANDVIK 3RE60 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3RE60 is a duplex (austenitic-ferritic) stainless steel characterized by the following properties: High resistance to stress corrosion cracking (SCC)

More information

ATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)

ATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601) Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS

More information

Precision feeler gage, calibrated shim steel and Specialty Spring Steels

Precision feeler gage, calibrated shim steel and Specialty Spring Steels Precision feeler gage, calibrated shim steel and Specialty Spring Steels 2011 Your partner for precision steels We offer an extensive range of precision feeler gages and shim steel which covers most product

More information

Material data sheet. EOS Aluminium AlSi10Mg. Description

Material data sheet. EOS Aluminium AlSi10Mg.   Description https://gpiprototype.com EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides

More information

ATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION

ATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening

More information

Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.

Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy

More information

SANDVIK 3R65 TUBE AND PIPE, SEAMLESS

SANDVIK 3R65 TUBE AND PIPE, SEAMLESS SANDVIK 3R65 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R65 is a molybdenum-alloyed austenitic stainless chromium-nickel steel with a low carbon content. STANDARDS ASTM: TP316L, TP316 UNS: S31603, S31600

More information

HOTVAR Hot work tool steel

HOTVAR Hot work tool steel T OOL STEEL FACTS HOTVAR Hot work tool steel Wherever tools are made Wherever tools are used General HOTVAR is a high performance molybdenumvanadium alloyed hot-work tool steel which is characterized by:

More information

Cannot be strengthened (precipitation hardening) Strength can be increased only through cold-work Three main groups : 1xxx, 3xxx and 5xxx series

Cannot be strengthened (precipitation hardening) Strength can be increased only through cold-work Three main groups : 1xxx, 3xxx and 5xxx series 1. Aluminium (Al) Extremely useful engineering material o has low density (2.70 g/cm3) o good corrosion resistance in most natural environment o non-toxic : suitable for food containers and packaging o

More information

PRESSURFECT CNG TUBE AND PIPE, SEAMLESS

PRESSURFECT CNG TUBE AND PIPE, SEAMLESS PRESSURFECT CNG TUBE AND PIPE, SEAMLESS DATASHEET Pressurfect CNG is a dual grade certified (ASTM 316/316L) austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content used for

More information

Custom 455, UNS S45500

Custom 455, UNS S45500 Custom 455, UNS S45500 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Specifications: AMS 5617, AMS 5860, ASTM A313 ASTM A564, ASTM A693 Custom 455 Alloy Description Custom 455 stainless

More information

Identification. Type Analysis

Identification. Type Analysis Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur

More information

Material data sheet. EOS StainlessSteel 17-4 for EOSINT M 270. Description, application

Material data sheet. EOS StainlessSteel 17-4 for EOSINT M 270. Description, application EOS StainlessSteel 17-4 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS Stainless Steel 17-4 is

More information

MATERIALS. Music Wire. The following will be a general discussion of. Music wire is best used for smaller springs.

MATERIALS. Music Wire. The following will be a general discussion of. Music wire is best used for smaller springs. MATERIALS The following will be a general discussion of materials used in both compression springs as well as stamped cantilever type springs used in battery contact applications. The five basic materials

More information

Specification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564

Specification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564 ATI 400 Nickel-Base Alloy (UNS N04400) INTRODUCTION ATI 400 alloy (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently applied

More information

Forta SDX 2507 EN , ASTM UNS S32750

Forta SDX 2507 EN , ASTM UNS S32750 Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely

More information

Nickel Based Superalloy Hastelloy B-3 (UNS N10675)

Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better

More information

ESSHETE 1250 TUBE AND PIPE, SEAMLESS

ESSHETE 1250 TUBE AND PIPE, SEAMLESS ESSHETE 1250 TUBE AND PIPE, SEAMLESS DATASHEET Esshete 1250 is a fully austenitic chromium-nickel steel with excellent high- temperature strength and good resistance to corrosion in boiler applications.

More information

Chapter 11 Part 2. Metals and Alloys

Chapter 11 Part 2. Metals and Alloys Chapter 11 Part 2 Metals and Alloys Nomenclature of Steels Historically, many methods for identifying alloys by their composition have been developed The commonly used schemes in this country are those

More information

Stainless Steel (17/4PH&630) Bar

Stainless Steel (17/4PH&630) Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

EOS NickelAlloy IN718 is a heat and corrosion resistant nickel alloy powder which has been optimized

EOS NickelAlloy IN718 is a heat and corrosion resistant nickel alloy powder which has been optimized is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOS M systems. This document provides information and data for parts built using powder (EOS

More information

Comparison of BS and BS EN for steel materials

Comparison of BS and BS EN for steel materials Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of

More information

Stainless Steel Bar

Stainless Steel Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

The fortress of honor with its production and of trust with its quality

The fortress of honor with its production and of trust with its quality The fortress of honor with its production and of trust with its quality www.sarbak.com.tr Sarbak Metal Our company will continue to exist as an internationally leading company with activities carried

More information

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two

More information

50948-RHN Putney. Friday, 15 December This document includes: Code Section Revision Dated

50948-RHN Putney. Friday, 15 December This document includes: Code Section Revision Dated 50948-RHN Putney Friday, 15 December 2017 This document includes: Code Section Revision Dated Z11 Purpose made metalwork 1 Table of Contents Title Z11 Purpose made metalwork Page 3 Z11 Purpose made metalwork

More information

15-5 PH STAINLESS STEEL

15-5 PH STAINLESS STEEL Aerospace Chemical Food Processing Metalworking Paper Industries AK STEEL offers a combination of high strength and hardness, good corrosion resistance plus excellent transverse mechanical properties.

More information

Specification Stainless spring steel

Specification Stainless spring steel Specification 218-6 Class: Semifinished Products of Steel Class No.:15 Stainless Spring Steel JED 5M Previous Edition Abbreviated Title 21-1 Stainless spring steel 852 5 4 1 Scope The specification refers

More information

Tubes and Pipes. Tubes and Pipes D-02

Tubes and Pipes. Tubes and Pipes D-02 s and Pipes s and Pipes D-0 D-03 s and Pipes Contents s Tubing Selection Tubing Handling Gas Service Tubing Installation Suggested Allowable Working Pressure Tables Stainless Steel Seamless Tubing Carbon

More information

VDM Aluchrom Y Hf Aluchrom Y Hf

VDM Aluchrom Y Hf Aluchrom Y Hf VDM Aluchrom Y Hf Aluchrom Y Hf Material Data Sheet No. 4149 September 2017 September 2017 VDM Aluchrome Y Hf 2 VDM Aluchrome Y Hf Aluchrom Y Hf VDM Aluchrom Y Hf is a ferritic chrome steel alloyed with

More information

Material data sheet. EOS NickelAlloy IN625. Description

Material data sheet. EOS NickelAlloy IN625. Description EOS NickelAlloy IN625 EOS NickelAlloy IN625 is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information

More information

Supra 316plus EN , ASTM UNS S31655

Supra 316plus EN , ASTM UNS S31655 Supra 316plus EN 1.4420, ASTM UNS S31655 General characteristics With its high chromium content, Supra 316 plus content delivers high strength, good formability, and excellent weldability, making it ideal

More information

- HSS-Blade (EOS art.-no ) - 90 µm mesh for powder sieving recommended (EOS art.-no ) - Argon atmosphere

- HSS-Blade (EOS art.-no ) - 90 µm mesh for powder sieving recommended (EOS art.-no ) - Argon atmosphere EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is a aluminium metal alloy powder intended for processing on EOS DMLS systems. This document provides information and data for parts built using EOS Aluminium

More information