1-1/2 LB FM7 CND BD ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED
|
|
|
- Cameron Jackson
- 6 years ago
- Views:
Transcription
1 LB57 1-1/2 LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category LB57 Appleton/Oz Gedney Conduit Body, Electro Zinc Plated Dichromate Epoxy Powder Coated Gray Iron Alloy Body, Neoprene Gasket, Stainless Steel Cover Screw; 1-1/2 Inch Hub; 7.13 Inch L X 3.69 Inch H; Unilet[R] Brand; Federal Specification W-C-586B 2.5 (lbs/each) Bodies & Covers Features Access Opening BACK Cover Type ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED CAST GRAY IRON ALLOY Form Type FORM 7 Hub Location 90 DEG Material ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, STAINLESS STEEL COVER SCREW Number of Hubs 2 Dimensions and Weight Size Descriptions Additional Information Commodity Description Description Long Description Product Type 1-1/2 INCH 7.13 INCH L X 3.69 INCH H Manufacturer Information Brand Unilet[R] GTIN Manufacturers Part Number LB57 UPC FEDERAL SPECIFICATION W-C-586B Steel Conduit Bodies - Conduit Bodies & Covers - Steel 1-1/2 LB FM7 CND BD CONDUIT BODY, ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, STAINLESS STEEL COVER SCREW; 1-1/2 INCH HUB; 7.13 INCH L X 3.69 INCH H; UNILET[R] BRAND; FEDERAL SPECIFICATION W-C-586B Rigid Conduit Outlet Body
2 Taxonomies, Classifications, and Categories Category Description FORM 7, 8, CONDULETS, COVERS, & GASKETS Packaging Carton 1 Package 10 Weight Per each 2.5 Uses, Certifications, and Standards Configuration Installation Used On LB THREADED IMC/RIGID CONDUIT
3 FM7 Unilet Conduit Outlet Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors for maintenance. Features Smooth, rounded integral bushings in hubs protect conductor insulation. Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity. Wedge-Lok Form-IN-Place covers with integral gasket are approved for use in wet locations. Grayloy-iron bodies with cast covers and gasket are approved for use in wet locations. Unique Wedge-Lok clip cover design allows easy removal at any later time, without damaging the conduit body. The cover is secured with clips, not screws. Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers. Equivalent FM7 and Form 7 units have identical applications and installation dimensions. Flat back design provides greater cubic content for easier wire pulling, and more room for splicing. Fits flush and snug against flat surfaces for more stable installation. Smooth hub bushings and cover openings protect conductor insulation. Smooth hub openings allow easy conduit joining. Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque. Cover screws and clips are captive to prevent loss. Hub size, body style, compliance data, maximum wire number/ size and cubic capacity molded into body. Standard Materials Body: Grayloy-iron or copperfree (4/10 of 1% max.) aluminum Covers: Grayloy-iron, copperfree (4/10 of 1% max.) aluminum or steel Cover screws: stainless steel Standard Finishes Grayloy-iron bodies and covers: triplecoat (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat Cast aluminum bodies and covers: epoxy powder coat Steel covers: zinc electroplate Stamped aluminum covers: natural finish Certifications and Compliances UL Standard: 514A, 514B UL Listed: E2527 CSA Standard: C22.2 No CSA Certified: NEMA Standard: FB-1 Options PVC coating available on select aluminum bodies and covers. Add suffix -PVC to catalog number. Illustrated Features Type LB Conduit Body with Cast Aluminum Cover, 1 Type C shown Grayloy -Iron, 1 Type C shown with cut-away body and cover to illustrate Wedge-Lok Clip Cover detail Illustrated views are cut away to demonstrate back configurations. Appleton FM7 (C57, 1-1/2 ) 28 Cubic Inches Capacity Flat-Back Design Crouse-Hinds Form 7 (C57, 1-1/2 ) 26 Cubic Inches Capacity Fittings Fittings: Conduit Bodies Crouse-Hinds and Form 7 are registered trademarks of Cooper Crouse-Hinds. September
4 FM7 Unilet Conduit Bodies Appleton FM7 Conduit Bodies * (inches) C LB LL LR T Grayloy-Iron Aluminum Grayloy-Iron Aluminum Grayloy-Iron Aluminum Grayloy-Iron Aluminum Grayloy-Iron Aluminum Fittings: Conduit Bodies Fittings 1/2 C17 C17-SA LB17 LB17-SA LL17 LL17-SA LR17 LR17-SA T17 T17-SA 3/4 C27 C27-SA LB27 LB27-SA LL27 LL27-SA LR27 LR27-SA T27 T27-SA 1 C37 C37-SA LB37 LB37-SA LL37 LL37-SA LR37 LR37-SA T37 T37-SA 1-1/4 C47 C47-SA LB47 LB47-SA LL47 LL47-SA LR47 LR47-SA T47 T47-SA 1-1/2 C57 C57-SA LB57 LB57-SA LL57 LL57-SA LR57 LR57-SA T57 T57-SA 2 C67 C67-SA LB67 LB67-SA LL67 LL67SA LR67 LR67-SA T67 T67-SA 2-1/2 C77 C77-SA LB77 LB77-SA LL77 LL77-SA LR77 LR77-SA T77 T77-SA 3 C87 C87-SA LB87 LB87-SA LL87 LL87-SA LR87 LR87-SA T87 T87-SA 3-1/2 LB97 LB97-SA LL97 LL97-SA LR97 LR97-SA T97 T97-SA 4 LB107 LB107-SA LL107 LL107-SA LR107 LR107-SA T107 T107-SA (inches) E L TA TB X Grayloy-Iron Aluminum Grayloy-Iron Aluminum Grayloy-Iron Aluminum Grayloy-Iron Aluminum Grayloy-Iron Aluminum 1/2 E17 E17-SA L17 TA17 TB17 TB17-SA X17 X17-SA 3/4 E27 E27-SA L27 TA27 TB27 TB27-SA X27 X27-SA 1 E37 E37-SA L37 TA37 TB37 TB37-SA X37 X37-SA 1-1/4 L47 TA47 TB47 TB47-SA X47 X47-SA 1-1/2 L57 TA57 TB57 TB57-SA X57 X57-SA 2 L67 TA67 TB67 TB67-SA X67 X67-SA * Refer to following pages for Wiring Capacity Table. L Unilets have double opening and are furnished with one steel cover, assembled. PVC coating available on select aluminum bodies. Add suffix -PVC to catalog number. 6 September 2010
5 FM7 Unilet Conduit Outlet Bodies and Covers Wiring Capacity Wiring Capacity: Combine Body and Cover Capacities for Total Usable Capacity per NEC (A) Capacity (in 3 /dm 3 ) (Inches) C E LB LL LR L T TA TB X Stamped Cover Cast Cover Fittings FM7 Grayloy -Iron Bodies and Covers: Threaded 1/2 5.00/ / / 3/4 9.00/ / 0.80/ Fittings: Conduit Bodies 1 1-1/4 1-1/ / / / / / 2.30/ / 4.80/ / FM7 Aluminum Bodies and Covers: Threaded 1/2 0.30/ / /4 0.50/ / 1 1-1/4 1.80/ 1-1/2 2.30/ / 4.80/ / / September 2010
6 FM7 Unilet Conduit Outlet Body Dimensions FITTINGS: CONDUIT BODIES Fittings Hub Size (Inches) 1/2 3/ /4 1-1/ / /2 4 Type C Type E, L, LB, LL, LR Type T, TA, TB, X Dimensions in Inches/Millimeters A B C D E F G H J K L M N P Q R S T 5.00/ / / / / / / / 5.25/ 1.38/ / / / / / / / / / / / / / / / / / / / / / / / / 5.75/ 6.94/ 6.94/ 2.25/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 3.19/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 5.25/ 2.63/ / / / / 5.75/ 6.94/ 6.94/ Fraction/Decimal Equivalents (Inches) Fraction Decimal Fraction Decimal Fraction Decimal Fraction Decimal 1/ / / / / / / / / / / / /4 1/ / November 2011
Mogul Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
Applications To provide access to large and heavy conductors for pulling, splicing, maintenance and future changes / upgrades Allows connection of straight conduit runs, branch conduit runs and 90 bends.
Material/Finish Aluminum Copper-free aluminum (less than 4/10 of 1%) Electrostatically applied powder coating
3 LR Type Applications To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. eatures Intermateability UL Listed and CSA Certified interchangeability
ALUMINUM OR IRON CONDUIT BODIES
7 SERIES ALUMINUM OR CONDUIT BODIES LR Type Applications To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. Features Intermateability UL Listed
IRON CONDUIT BODIES 5-5/16 (135) 6-9/16 (167) 7-9/16 (192) 8-7/16 (214) 10-3/8 (264) 12-3/8 (314) 15-5/8 (397) 15-5/8 (397)
KILLARK C Type Applications To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. Features Completely interchangeable with competative bodies, gaskets,
ALUMINUM OR MALLEABLE IRON CONDUIT BODIES
O SERIES / 5 SERIES ALUMINUM OR MALLEABLE CONDUIT BODIES Suitable for wet locations when used with gasketed Federal Specification W-C-586D/A-A 50563. Suitable for use in hazardous location applications
Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles. Compliance: CSA Listed. B Index. February Master Index. Cat. No.
FS and FD Cast Device Boxes: Malleable Iron, Aluminum B Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles Compliance: CSA Listed B-2 B-3 FS and FD Cast Device Boxes: Index Page Description
Service Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
FS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
Expansion & Deflection Fittings. SOLUTIONS for the Construction Industry
Expansion & Deflection Fittings SOLUTIONS for the Construction Industry TTINGS FI ST D LO C AF/AF8 SERIES e st d, in M a c h e d, As d in D e s i g n e d, b le the Casted Body with NPT hub size se m Ca
I-2 Unions, Sealing Fittings, Flexible Couplings, Elbows, Drain/Breather, Close-Up Plugs: Explosionproof UNILETS for Use with Threaded Metal Conduit
-2 Unions, Sealing Fittings, Flexible Couplings, Elbows, Drain/Breather, Close-Up Plugs: Explosionproof UNLETS for Use with Threaded Metal Conduit Applications: Unions UNY and UNF unions are used for joining
1510 RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 260533-RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section includes conduit raceways, and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and
8461C 4SQ, 1"RSD Rndopnw/Ers CVR
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 4SQ, 1"RSD Rndopnw/Ers CVR Appleton/Oz Gedney Catalog Number Manufacturer Appleton/Oz Gedney Description Steel Square
(3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (8) 1 INCH CONDUIT SIDES Box
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 4SD1 4S Box 1"Ko 2-1/8DP Appleton/Oz Gedney Catalog Number 4SD1 Manufacturer Appleton/Oz Gedney Description Steel Square
Electrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
4CS12 4CS-1/2 4X1-7/8D Handybox. Features. Dimensions and Weight. Long Description. Catalog Number
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 4CS12 4CS-1/2 4X1-7/8D Handybox Appleton/Oz Gedney Catalog Number 4CS12 Manufacturer Appleton/Oz
Steel Square Box, Height 4 Inch; Width 4 Inch; Depth 1-1/2 Inch; Capacity 21 Cu Inch; 17 Knockout(S); Knockout Location (5) Bottom, (12) Side
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Knockout Location Knockout Size 4SSPLDR
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
Youngstown State University
SECTION 260533 - RACEWAYS PART 1 - GENERAL SUMMARY A. This section includes raceways for electrical wiring. Types of raceways in this section include the following: 1. Flexible metal conduit 2. Liquid
SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
Flush Service Floor Boxes
Flush Service Floor Boxes PRODUCT SPECIFICATION: Flush Service Floor Boxes PART 1: Overview Considerations when writing specifications: Floor boxes are manufactured in various sizes, configurations and
SECTION RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 26 05 33 - RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes conduit and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and handholes.
Design Standard Conduit for Electrical Systems
Design Standard Purpose: This design standard has the purpose of creating a consistent application for the installation of conduits throughout the East Side Union High School District, therefore achieving
Thomas & Betts LT & CORD FITTINGS
Thomas & Betts LT & CORD FITTINGS Thomas & Betts Liquid Tight Sure Tight Gland Double Beveled Sealing Ring Safe Edge Ground Cone Threaded Connector Case Hardened Locknut 8Feature / Benefit Sure Tight Gland
Steel Octagon Boxes & Ceiling Pans
3 1 /4" ROUND CEILING PAN 4.0 CUBIC INCH CAPACITY 1 /2" DEEP CLAMPS IN BOTTOM TP266 Cat. # Cable Conduit Unit Qty. Wt. Lbs. Per 100 TP266 4 Cable 1 1 /2" 30 3 1 /4" OCTAGON OUTLET BOXES 9.0 CUBIC INCH
Procurement Services SVC East Fowler Avenue Tampa, Florida (813)
Procurement Services SVC 1073 4202 East Fowler Avenue Tampa, Florida 33620 (813) 974-2481 Web Address: https://www.usf.edu/business-finance/purchasing/public-bids/rfi.aspx October 12, 2018 Invitation to
Electrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
Red Dot. Rigid Fittings. Table of Contents
Table of Contents Conduit Unions Hazardous Locations... C2 C3 Conduit Fittings Hazardous Locations... C4 C5 Sealing Fittings Hazardous Locations... C6 C7 Conduit Hubs Raintight for Threaded Rigid Conduits...
Specifications Rigid Metal Conduit / PVC Coated Rigid Metal Conduit
Specifications Rigid Metal Conduit / PVC Coated Rigid Metal Conduit Ref. CEC Rule 12-1000 Rigid Metal Conduit affords maximum mechanical protection to conductors within the raceway. Rigid metal conduit
Cable Terminators COMMERCIAL AND INDUSTRIAL FITTINGS: RIGID AND IMC CONDUIT FITTINGS. Applications
Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Terminator The Terminator body is deep enough to provide an ample compound chamber
maximum mechanical protection
Rigid Metal Conduit maximum mechanical protection REXWAY Rigid Metal Conduit (RMC) is produced to meet the specifications laid out in ANSI C80.1 and UL 6. Manufactured from high strength mild steel strip,
T&B Fittings. Industrial Fittings. Rigid Metal Conduit Fittings. Specifications Rigid Metal Conduit/PVC Coated Rigid Metal Conduit
Specifications Rigid Metal Conduit/PVC Coated Rigid Metal Conduit Ref. CEC Rule 12-1000 Rigid Metal Conduit affords maximum mechanical protection to conductors within the raceway. Rigid metal conduit can
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels. Threaded stud and
1496-1497.qxp 12/16/2013 8:44 PM Page 1497 Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs
Specifications Electrical Metallic Tubing (EMT)
T& Fittings Specifications Electrical Metallic Tubing (EMT) Ref. CEC Rule 12-000 not exceeding 750 Volts Electrical Metallic Tubing (EMT) is similar to rigid steel conduit but is much lighter, weighing
REA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
COMMERCIAL ITEM DESCRIPTION FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE
NOTICE OF VALIDATION INCH-POUND A-A-50552 NOTICE 1 30 October 2001 COMMERCIAL ITEM DESCRIPTION FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE A-A-50552, dated 31 May 1995, has been reviewed
DMS CONDUIT EFFECTIVE DATE: APRIL
DMS - 11030 EFFECTIVE DATE: APRIL 2014 11030.1. Description. This Specification governs the materials, composition, quality, sampling, and testing of electrical conduit. 11030.2. Units of Measurements.
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required
NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section CONDUIT, FITTINGS, AND BODIES
Section 16111 PART 1 GENERAL 1.01 SUMMARY This Section covers the furnishing and installation of conduit, fittings and bodies. 1.02 MEASUREMENT AND PAYMENT Unless indicated in the Unit Price Schedule as
TUFF-SEAL RSF SERIES ALUMINUM CORD GRIPS. Toll Free Fax RSF Series Aluminum Flat Cable Cord Grips G 16
TUFF-SEAL RSF SERIES ALUMINUM CORD RIPS RSF Series Aluminum Flat Cable Cord rips Tuff Seal RSF Cord rips are specially designed for heavy-duty, flat cable or festoon system applications. Unique to the
SECTION RACEWAYS AND BOXES
PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 26 05 33 RACEWAYS AND BOXES A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
A. Coordinate arrangement, mounting, and support of electrical equipment:
SECTION 260500 -BASIC ELECTRICAL MATERIALS AND METHODS PART 1- GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Electrical equipment coordination and installation. 2. Sleeves for raceways
SECTION RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS. A. ANSI C Electrical Rigid Steel Conduit, Zinc Coated.
SECTION 26 05 33 RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 -GENERAL 1.1 SUMMARY A. Section includes conduit and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and handholes.
PRODUCT CATALOG & BUYER S GUIDE
PVC Coated Rigid Metal Conduit PM-111 PRODUCT CATALOG & BUYER S GUIDE GO FOR THE GREEN! Table of Contents Table of Contents Introduction Performance Matters!...4-15 Corrosion Protection...16 Conduit PVC
PVC Coated Rigid Metal Conduit PM-111 PRODUCT CATALOG & BUYER S GUIDE GO FOR THE GREEN!
PVC Coated Rigid Metal Conduit PM-111 PRODUCT CATALOG & BUYER S GUIDE GO FOR THE GREEN! Table of Contents Table of Contents Introduction Performance Matters!...4-15 Corrosion Protection...16 Conduit PVC
2. Fittings shall be threaded and finished similar to conduit. Threadless fittings shall not be used.
SECTION 16110 RACEWAYS AND FITTINGS 1.00 RACEWAYS: All wiring shall be in raceways. Raceways shall be run in slabs, walls, above ceilings or exposed as indicated on drawings. Acceptable raceway and their
EXBLT Series for Harsh and Hazardous Environments
EXBLT Series for Harsh and Hazardous Environments OSUR CL HA ES EN KILLARK Z LO C EXBLT SERIES JUNCTION BOXES Predrilled internal mounting pan bosses as standard. Uses same mounting pans as the EXB series
Overview Steel City. Metallic Boxes and Covers. Advantages of Steel City. Boxes and Covers. Boxes & Covers Steel City Metallic Boxes
Steel City Metallic Boxes and Covers Steel City is the industry-leading product line of metallic switch and outlet boxes used in electrical construction. Since 1904, Steel City products have symbolized
* * * INCH-POUND * * * W-F-406E March 26, SUPERSEDING W-F-406D August 10, 1987 FEDERAL SPECIFICATION
*------------* * INCH-POUND * *------------* March 26, 1993 -------------- SUPERSEDING W-F-406D August 10, 1987 FEDERAL SPECIFICATION FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL, FLEXIBLE
SECTION A. Underwriters Laboratories, Inc., listed and NEC approved
PART 1 GENERAL 1.01 DESCRIPTION A. Provide all raceways, fittings, and boxes of specified type required for complete project. Install all systems in raceways unless specifically noted otherwise. Provide
SPECIFICATIONS FOR THE INSTALLATION OF REDUCED PRESSURE BACKFLOW PREVENTERS AND CONCRETE VAULTS FOR METERS 4 AND LARGER
SPECIFICATIONS FOR THE INSTALLATION OF REDUCED PRESSURE BACKFLOW PREVENTERS AND CONCRETE VAULTS FOR METERS 4 AND LARGER Updated January 2018 RP-2 Installation Specifications 1. In W.H.U.D s service area
SECTION PATHWAYS FOR ELECTRONIC SAFETY AND SECURITY
SECTION 280528 - PATHWAYS FOR ELECTRONIC SAFETY AND SECURITY PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Metal conduits, tubing, and fittings. 2. Nonmetallic conduits, tubing, and fittings. 3.
Unflanged Junction or Pull Boxes
UA12 Unflanged Junction or Pull Boxes Cast Iron Box For Surface Mounting - NEMA 4 Type YS Raintight - Watertight - Dust Tight UA12 Use: These boxes are general purpose enclosures listed by Underwriters
SECTION RACEWAYS
SECTION 16110 RACEWAYS PART 1 GENERAL 1.1 SYSTEM DESCRIPTION A. Provide a complete raceway system suitable for receiving wire and cable and continuous from outlet to outlet. System shall be complete with
TUFF-SEAL TM TECHNICAL REFERENCE SECTION
TUFF-SEAL TM TECHNOLOY TUFF-SEAL TM TECHNICAL REFERENCE SECTION OPERATIN TEMPERATURES Material Temperature range Aluminum -40 F to +300 F (-40 C to +149 C) Buna-N -40 F to +50 F (-40 C to +11 C) Nylon
Sand Cast Aluminum Form 7 Conduit Bodies
Sand ast luminum Form 7 onduit odies Sand ast luminum Form 7 onduit odies Superior corrosion protection Thomas & etts is pleased to introduce the new line of Sand ast luminum Form 7 onduit odies featuring
Sand Cast Aluminum Form 7 Conduit Bodies
Sand ast luminum Form 7 onduit odies Sand ast luminum Form 7 onduit odies Superior corrosion protection Thomas & etts is pleased to introduce the new line of Sand ast luminum Form 7 onduit odies featuring
Scepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes TM ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" Fully Certified: NEMA, UL & CSA We build tough products for tough environments Standing Still is Not an Option.
Floor Box Assembly. Features. Dimensions and Weight. Descriptions. Catalog Number
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 EFBFF Floor Box Assembly Wiremold/Legrand Catalog Number EFBFF Manufacturer Wiremold/Legrand Description Furniture Feed
BUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466
BUSWAY LOW VOLTAGE (POW-R-WAY III) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein
Metal Framing Channels Overview
New Trivalent Galv-Krom Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom finish. Galv-Krom finish is a combination of.5 mils electro-plated Zinc and
Liquidtight Flexible Metal Conduit Fittings For Control and Power Cable Applications. * U.L. and CSA not applicable.
For Control and Power Cable Applications Hub Conduit Dimensions (in.) Cat. No. Size Size A B C 5229* 1/4 1/4 27/32 1-3/8 15/32 5330* 3/8 5/16 63/64 1-3/8 15/32 * U.L. and CSA not applicable. Steel, malleable
Switch Rack Assemblies
Switch Rack Assemblies Applications: Free-standing switch rack assemblies are used: To provide a complete motor control center in one integrated package Outdoors and indoors In damp, wet or corrosive locations
SECTION OUTLET, PULL, AND JUNCTION BOXES
SECTION 16131 OUTLET, PULL, AND JUNCTION BOXES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09900 - Painting. 2. 16112 - Raceways and Conduits. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
A. Product Data: For surface pathways, wireways and fittings, floor boxes, hinged-cover enclosures, and cabinets.
ALLIANT ENERGY CENTER PAVILIONS Project No. 2013 027 SECTION 27 05 28 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
Overview Better by Design
Overview Better by Design Ocal-Blue PVC-coated conduit and fittings represent a complete corrosion-protection package for your entire conduit system. This extensive product line includes the largest number
DIVISION 26 RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL RELATED DOCUMENTS
PART 1 - GENERAL 01.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification sections, apply to work of this Section.
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
S966SP Cover 1G Gfci/Deco Wet Loc Vert Metal Gy. Material, Color, and Finish Color Gray 0 ELECTROSTATICALLY PAINTED BAKED POWDER COATED
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 S966SP Cover 1G Gfci/Deco Wet Loc Vert Metal Gy Catalog Number Manufacturer Description Weight per unit Product Category
E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
Features 1.34 In Width X 1.53 In Height X 1.13 Recp gang Stainless Steel/304 Stainless Steel
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 93101 1G 430SS Receptacle Plate Cooper Wiring Devices Catalog Number 93101 Manufacturer
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL SECTION RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 260533 - RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes raceways, fittings, boxes, enclosures, and cabinets for electrical wiring. B. See Division
This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral
SECTION ELECTRICAL SYSTEM RACEWAY and BOXES
PART 1 GENERAL 1.1 SECTION INCLUDES A. Metal conduit B. Flexible metal conduit C. Liquid tight flexible metal conduit D. Electrical metallic tubing E. Non-metallic conduit F. Fittings and conduit bodies
Student Services & Classroom Addition
SECTION 260533 - RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes raceways, fittings, boxes, enclosures, cabinets, and track busway for electrical wiring.
FitTech UP171F ELLIPTICAL (FOOTING) UP171I ELLIPTICAL (IN GROUND) UP171S ELLIPTICAL (SURFACE) Parts List
ELLIPTICAL BASE COVER DESCRIPTION FOOTBUCK WELD ASS'Y HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER (" O.D.)
FAST-09. Flextray F.A.S.T. System The Next Generation RF Solution
FAST-09 Flextray F.A.S.T. System The Next Generation RF Solution Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required for
TUFF-SEAL RSR SERIES ALUMINUM CORD GRIPS. Toll Free Fax RSR Series Straight Aluminum Cord Grips G 1
TUFF-SEAL Toll Free -800-70-0975 Fax -800-892-660 COMPLETE ASSEMBLY PART NUMBERS RSR SERIES ALUMINUM CORD RIPS RSR Series Straight Aluminum Cord rips Tuff Seal RSR Series Aluminum Cord rips are UL Listed
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
AFC Cable Systems, Inc. Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519.13 METAL CLAD CABLE-MC
L-2 Receptacles and Plugs: Explosionproof For use with Threaded Metal Conduit.
-2 Receptacles and Plugs: Explosionproof For use with Threaded Metal Conduit. Applications ocations where receptacles are used with stationary or portable electrically operated devices such as lighting
Raceway and Boxes for Electrical Systems Page 1 of 7
Last Update: May 12, 2017 A. Conduits: Page 1 of 7 1. All conductors for each and every electrical system shall be installed in a raceway except communications and A/V systems which shall have stubs to
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
1993 Specifications CSJ SPECIAL SPECIFICATION 4880 Bridge Equipment Cabinets
1993 Specifications CSJ 0331-04-050 SPECIAL SPECIFICATION 4880 Bridge Equipment Cabinets 1. Description. This Item shall govern for furnishing and installation of Equipment Cabinets for the Bridge Collapse
D-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature
DESCRIPTION/APPLICATION Fine Pitch D-Sub Connectors are designed for reliable interfaces in modern, high-density applications. Conforms with SCSI 2/3 internal cabling specification. The low-profile design
Mechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
KEYSTONE SERIES GR RESIlIENT SEATED BUTTERFly VAlVES GRF
A heavy duty double flanged concentric design resilient seated butterfly valve FEATURES GENERAL APPLICATION These valves are for water or air service where a drop-tight shut-off and double flanged body
SPECIAL SPECIFICATION 1276 Pedestrain Overpass Lighting
1993 Specifications CSJ 0074-06-199 SPECIAL SPECIFICATION 1276 Pedestrain Overpass Lighting 1. Description. This Item shall govern for furnishing and installing the various types of lighting fixtures,
Kaf-Tech Product Specification
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519.13 METAL CLAD CABLE-LUMINARY CABLE
GROUNDING. Ground-Lok CLAMP SYSTEM SERRATED HEAD - (COMPONENTS)
PAGE 70 GREAVES EXCLUSIVE Ground-Lok CLAMP SYSTEM SERRATED HEAD - (COMPONENTS) BRONZE WATER PIPE CLAMPS Interchangeable clamps and adapters provide versatility Matching serrations assure positive lock
DIVISION 26 - ELECTRICAL Section Conduit for Electrical Systems 1. GENERAL 1.1 WORK INCLUDES
DIVISION 26 - ELECTRICAL Section 26 05 33 - Conduit for Electrical Systems 1. GENERAL 1.1 WORK INCLUDES A. Base Bid: 1. Electrical Contractor provide: a. Rigid metallic conduit and fittings b. Flexible
SECTION CONDUITS AND BOXES PART 1- GENERAL. A. Work covered by this section includes the furnishing and installation of conduits and boxes.
SECTION 16111 CONDUITS AND BOXES 1.01 DESCRIPTION PART 1- GENERAL A. Work covered by this section includes the furnishing and installation of conduits and boxes. 1.02 SUBMITTALS A. The Contractor shall
Fig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
FitTech UP166F CHEST PRESS (FOOTING) UP166I CHEST PREES (IN GROUND) UP166S CHEST PRESS (SURFACE)
CHEST PRESS BASE COVER DESCRIPTION FOOTBUCK WELD ASSEMBLY HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER
PRODUCT CATALOG STAINLESS STEEL CONDUIT & FITTINGS ALL STAINLESS STEEL ALL IN STOCK
PRODUCT CATALOG STAINLESS STEEL CONDUIT & FITTINGS ALL STAINLESS STEEL ALL IN STOCK When Gibson Stainless was founded in 1995, Type 316 SS electrical fittings were very hard to find. Zinc plated, galvanized,
ATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 10/13/2016 Issued: 12/17/2014 Visit www.ati-es.com for current status Revised: 10/30/2015 Page 1 of
FPBTCBK D/C Al FLGD CVR. Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Material Number of Gangs Service Type
Conduit Bodies & Covers form 7 series
Coduit odies & Covers form 7 series 1 FORM 7 Gray Iro Coduit odies vailable i L, LL, LR, C & T Type Styles Iterchageable with all major brad Form 7 Coduit odies ad Covers NPT Tapered hubs UL stadard 514.
Introduction to Cast Junction Boxes
UA2 Introduction to UA2 I Purpose of Enclosure Enclosures are used to protect personnel against accidental contact with enclosed electrical devices or connections and to protect the enclosed devices or
W VMV High Wattage Series Champ H.I.D. Luminaires
3L 200-400W VMV High Wattage Series 3, 3R, 4, 4X; IP66 Application: VMV high wattage series Champ luminaires are used: in manufacturing plants, refineries, chemical, petrochemical, and other industrial
TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD GRIPS. Toll Free Fax
Selection, Service & Quality Solutions TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD RIPS RSSS Series Stainless Steel Corrosion-Resistant Cord Connectors The Tuff Seal RSSS series of corrosion-resistant cord