Lead Free Solder Bar

Size: px
Start display at page:

Download "Lead Free Solder Bar"

Transcription

1 Lead Free Bar (EFB-3N06(α) : Sn Ni(α)) EF Bar Series

2 (Use : Wave ing) EFB-3N06(α) (Sn Ni(α)) Ecojoin Co., Ltd ( ), 723-3, KoRimDong, YongInSi, KyungKiDo, Korea Tel : , Fax :

3 CONTENTS The Features of Product, Performance, Reliability, and Application of mass-production about Lead Free Bar EFB-3N06(Sn Ni(α)) I. Features of Product II. Explanation of Product III. Properties of Product (1) Properties of Dross (2) Properties of Spreadability and Wettability (3) Properties of Mechanical (4) ing Reliability IV. Properties of Mass-Production

4 I. Features of Product Excellent product minimizing Dross generation. Excellent product of less Pad Erosion. Excellent wettability and Spreadability. Superior joining Reliability. II. Explanation of Product 1. Product Name E F B 3 N 0 6 (α) Type Composition of Alloy 2. Melting Point Solid : 220 Liquid : Density 7.4 g/ cm3 4. Composition of Alloy (Unit : wt% ) Com. Sn Ni α Pb Zn Bi Fe Al As Cd Sb Quan tity Ref Structure of Alloy and Uniformity of Composition Picture of SEM for Sn Ni(α) Picture of SEM for Sn Ni(reference)

5 III.Properties of Product 1. Dross Test EFB-3N06α Bar is excellent product minimizing Dross generation. Sn--Ni-α solder Velocity of rotation : 60 (rpm) Temperature of : 250 ( o C) Time : 120 (min) Picture of equipment in dross test Experimental Setup Result of Dross Test I (250 ) (I-1 ) Condition of Dross Test Material of Test Equipment of Test Weight of Sample Condition Temperature Speed EFB-3N06(α), Sn Ni, Sn0.7(α), Sn0.7,Sn3Ag0.5(α) Equipment of Dross Test 2 Kg rpm (II-2) Result of Dross Test (Unit : g) Composition of Alloy 30 min 60 min 90 min 120 min Sn Ni(α) Sn Ni Sn0.7(α) Sn Sn3Ag0.5(α)

6 Temperature of : 250 Weight of Dross (g) Sn Ni(α) Sn Ni Sn0.7(α) Sn0.7 Sn3Ag0.5i(α) Time (hr) Result of Dross Test II (265 ) (II-1). Condition of Dross Test EFB-3N06(α), Sn Ni, Sn0.7(α), Sn0.7 Material of Test,Sn3Ag0.5(α) Equipment of Test Equipment of Dross Test Weight of 2 Kg Sample Condition Temperature 265 Speed 60 rpm (II-2). Result of Dross Test (Unit : g) Composition of Alloy 30 min 60 min 90 min 120 min Sn Ni(α) Sn Ni Temperature of : Sn Ni(α) Sn Ni Weight of Dross (g) Time (hr)

7 2. Properties of Spreadability and Wettability Evaluation of Properties in Spreadability EFB-3N06(α) BAR have excellent spreadability in 78% of Spreading rate. (D-H) Spread factor= D D=1.24 V 1/3 V=Mass/Density Pad : Non-oxygen Pad X 100 D Spreading test H Size : 30 X 30 X 0.4 mm 1. Results Composition of Alloy Average Sn Ni(α) Sn Ni Sn0.7(α) Sn Sn3Ag0.5(α)

8 Evaluation of Properties in Wettability EFB-3N06(α) BAR have excellent Wettability regardless of adding P. 1. Condition of Measurement Material of Test Equipment of Test Temperature Conditions Dipping Time Dipping Depth EFB-3N06(α), Sn Ni, Sn0.7(α), Sn0.7 Malcom, SP-2 (Globule Type) sec 3 mm 2. Results Composition of Alloy Item 1 2 Average Sn Ni(α) Wetting Time(sec) Wetting Force (mn) Sn Ni Wetting Time(sec) Wetting Force (mn) Sn0.7(α) Wetting Time(sec) Wetting Force (mn) Sn0.7 Wetting Time(sec) Wetting Force (mn) Wetting Time Wetting Time (sec) Wetting Force Wetting Force (mn) Sn Ni(α) Sn Ni Sn0.7(α) Sn0.7

9 3. Properties of Mechanical 1. Conditions of Measurement Material of Measurement Equipment of Test EFB-3N06(α),Sn Ni, Sn0.7(α), Sn0.7 Instron 8516 Conditions Test Sample C/H Speed KS 4 호 1.0mm/min 2. Result of Measurement Composition of Alloy Tensile Strength (MPa) Elongation(%) Reduction of Area (%) Sn Ni(α) Sn Ni Sn0.7(α) Sn

10 4. Reliability of Joint EFB-3N06(α) Bar have superior joining reliability with 85 kgf of joining strength. Evaluation of Properties in Joining Strength 1. Condition of Measurement Material of Test Equipment of Test Test Sample Condition C/H Speed Material of Plating EFB-3N06(α), Sn Ni, Sn0.7(α), Sn0.7 Instron 8516 Measuring strength after ing in Jig 1.0mm/min lead, 42Alloy lead 2. Results Sn Ni(α) lead 42Alloy lead Joining Strength (Kgf) (UTS) Evaluation of Properties of Creep Condition 125 Load Holder 1000 gf 1,000gf of static load /125 Schematic of IMD Specimen in creep test Picture of SEM 1Kg of static / 125 after 500 hr

11 Properties Represented when the joint is left at high temperature Aging 0h Aging 100h Aging 250h Aging 500h Sn Ni Sn Ni-α Sn-0.7 Sn-0.7-α

12 IV. Properties of Mass-Production in ing 1. Flow ing Test Conditions Conditions Equipment Measuring Equipment Material of Test PCB Size Temperature Flow M/C Microscope of low magnification Microscope of 3 dimension EFB-3N06(α) 195 X ShinMyung SAS 620 Observing microscope Observing microscope Temperature Profile of Flow Peak Temperature 265 Preheating Temperature 100 Optimal Temperature Profile Classification Conveyer Speed Preheating Temperature Temperature of Bath Condition 1.3 m/min

13 2. Results in Properties of Flow ing EFB-3N06(α) Bar is possible to obtain good condition of soldering with excellent fillet, without any Defect such as icicle, bridge, etc. TEST PCB Board Excellent Fillet Not occurring icicle After ing Results Condition Fillet icicle Etc. Results Excellent no no

ALPHA SACX Plus Product Guide

ALPHA SACX Plus Product Guide the product: Delivering the confidence you need to move to a lower silver alloy without sacrificing soldering performance or reliability ALPHA SACX Plus 0807 Product Guide the accuracy of this data. Liability

More information

ALPHA Vaculoy SAC300,305,400,405 LEAD FREE WAVE SOLDER ALLOY

ALPHA Vaculoy SAC300,305,400,405 LEAD FREE WAVE SOLDER ALLOY ALPHA Vaculoy SAC300,305,400,405 LEAD FREE WAVE SOLDER ALLOY DESCRIPTION Sn96.5Ag3Cu0.5 and Sn95.5Ag4Cu0.5 are lead-free alloys suitable for use as a replacement for Sn63 alloy. The Sn97Ag3 and Sn96Ag4

More information

ALPHA SACX Plus 0807/SACX Plus 0800 LEAD FREE SOLDER ALLOY

ALPHA SACX Plus 0807/SACX Plus 0800 LEAD FREE SOLDER ALLOY DESCRIPTION ALPHA SACX Plus 0807 is a low silver lead-free alloy specially designed with proprietary additives to deliver soldering and reliability performance similar to higher silver SAC alloys (ie.

More information

ALPHA SACX Plus 0307, 0300 LEAD FREE WAVE SOLDER & REWORK ALLOY

ALPHA SACX Plus 0307, 0300 LEAD FREE WAVE SOLDER & REWORK ALLOY DESCRIPTION ALPHA SACX Plus 0307 is a next generation lead-free alloy suitable for use as a replacement for SnPb, SAC305 and other low silver SAC alloys including the original SACX 0307 in wave solder,

More information

Lead Free No Clean Solder Paste 4900P Technical Data Sheet 4900P

Lead Free No Clean Solder Paste 4900P Technical Data Sheet 4900P Description MG Chemicals has developed a unique flux system designed specifically for high temperature lead free alloys. It provides the fluxing activity levels that promote thermal stability and prevents

More information

PRODUCT PROFILE ELECTROLOY LEAD FREE BAR

PRODUCT PROFILE ELECTROLOY LEAD FREE BAR PRODUCT PROFILE ELECTROLOY LEAD FREE BAR Product Name Product Code SOLDER BAR LEAD FREE ALLOY Sn99.3/Cu0.7+Ni LF- 801B LEAD FREE ALLOY Sn99.6/Cu0.4+Ni LF- 801BE ( TOP UP ALLOY ) The information and statements

More information

Typical Analysis Sn Ag Cu Pb Sb Bi In As Fe Ni Cd Al Zn Au

Typical Analysis Sn Ag Cu Pb Sb Bi In As Fe Ni Cd Al Zn Au TECHNICAL SPECIFICATIONS Physical Properties Solder Composition Qualitek Sn/Ag/Cu (Tin/Silver/Cu) Alloys are designed as a lead-free alternative for Sn/Pb alloys for electronics assembly operations. The

More information

Sn623-5T-E SOLDER PASTE

Sn623-5T-E SOLDER PASTE Sn623-5T-E SOLDER PASTE INTRODUCTION Singapore Asahi s solder paste Sn623-5T-E is a silver bearing paste to prevent silver migration and brittleness. It is formulated for fine pitch applications up to

More information

DSP 615D (Sn63/Pb37) NO CLEAN DISPENSING SOLDER PASTE

DSP 615D (Sn63/Pb37) NO CLEAN DISPENSING SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 615D (Sn63/Pb37) NO CLEAN DISPENSING SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 60101!

More information

Lead Free Soldering Technology

Lead Free Soldering Technology Lead Free Soldering Technology Chung-Ang University Young-Eui Shin Trend of Package Small, Light, High performance High speed, Large capacity High integrity, High density Comparison of package size 45mm

More information

M705-GRN360 K-Series

M705-GRN360 K-Series Senju Metal Industry Co.,Ltd. High-Reliability Lead-Free Solder Paste M705-GRN360 K-Series Manufacturer Senju Metal Industry Co.,Ltd. 23 Senju Hashido-cho, Adachi-Ku, Tokyo, Japan Phone: +81-33888-5156

More information

DSP 863 (Sn42/Bi58) LEAD FREE HALOGEN FREE NO CLEAN SOLDER PASTE

DSP 863 (Sn42/Bi58) LEAD FREE HALOGEN FREE NO CLEAN SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 863 (Sn42/Bi58) LEAD FREE HALOGEN FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison,

More information

DSP 875 (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE

DSP 875 (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 875 (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 60101 630-628-8083

More information

DSP 798LF (Ecolloy ) LEAD FREE WATER SOLUBLE SOLDER PASTE

DSP 798LF (Ecolloy ) LEAD FREE WATER SOLUBLE SOLDER PASTE LF217. 798LF Rev.A TECHNICAL SPECIFICATIONS LF217. 798LF Rev DSP 798LF (Ecolloy ) LEAD FREE WATER SOLUBLE SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 60101! 630-628-8083! FAX

More information

SnAg3.5 (CLF5013) Halide Free No Clean Core Wire

SnAg3.5 (CLF5013) Halide Free No Clean Core Wire Pb SnAg3.5 (CLF5013) Halide Free No Clean Core Wire INTRODUCTION With implementation of stringent manufacturing process, Asahi has developed a wide range of wires with diverse alloys and flux types to

More information

WF6317. A superactive low-volatile/high heat-resistant water-soluble flux for ball soldering

WF6317. A superactive low-volatile/high heat-resistant water-soluble flux for ball soldering WF637 A superactive low-volatile/high heat-resistant water-soluble flux for ball soldering Low viscosity and high tacking power stabilize ball holding force and ensures excellent solder wettability Easy

More information

SnAg3.0 (CLF5013) Halide Free No Clean Core Wire

SnAg3.0 (CLF5013) Halide Free No Clean Core Wire Pb SnAg3.0 (CLF5013) Halide Free No Clean Core Wire INTRODUCTION With implementation of stringent manufacturing process, Asahi has developed a wide range of wires with diverse alloys and flux types to

More information

DSP 670I (Sn63/Pb37) NO CLEAN SOLDER PASTE

DSP 670I (Sn63/Pb37) NO CLEAN SOLDER PASTE SN/AG/CU. 862 Rev.A SN/AG/CU. 862 Rev DSP 670I (Sn63/Pb37) NO CLEAN SOLDER PASTE USA: 315 Fairbank St. Addison, IL 60101 630-628-8083 FAX 630-628-6543 UK: Unit 9 Apex Ct. Bassendale Rd. Bromborough, Wirral

More information

DSP 230 (Sn96.5/Ag3.5) LEAD FREE R.M.A. SOLDER PASTE

DSP 230 (Sn96.5/Ag3.5) LEAD FREE R.M.A. SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 230 (Sn96.5/Ag3.5) LEAD FREE R.M.A. SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 630-628-8083

More information

ALPHA FLUITIN 1535 No Clean Cored Solder wire

ALPHA FLUITIN 1535 No Clean Cored Solder wire ALPHA FLUITIN 1535 No Clean Cored Solder wire Type: J-STD-004 ROL1 / IPC-SF-818-L2CN / ISO 12224 1.1.2 / DIN 8511 F SW26 DESCRIPTION Alpha Fluitin 1535 is an activated rosin cored solder wire developed

More information

DSP 798LF (Sn42/Bi58) LEAD FREE WATER SOLUBLE SOLDER PASTE

DSP 798LF (Sn42/Bi58) LEAD FREE WATER SOLUBLE SOLDER PASTE LF217. 798LF Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS LF217. 798LF Rev DSP 798LF (Sn42/Bi58) LEAD FREE WATER SOLUBLE SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 630-628-8083

More information

DSP 888D LEAD FREE NO CLEAN DISPENSING SOLDER PASTE

DSP 888D LEAD FREE NO CLEAN DISPENSING SOLDER PASTE LF217. 618D Rev.A TECHNICAL TECHNICAL SPECIFICATIONS DATA SHEET BI58 888D Rev.0 LF217. 618D Rev DSP 888D LEAD FREE NO CLEAN DISPENSING SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison,

More information

High-Reliability Lead-Free Solder Paste M705-GRN360-K-V. Senju Metal Industry Co.,Ltd. Senju Manufacturing (Europe) Ltd.

High-Reliability Lead-Free Solder Paste M705-GRN360-K-V. Senju Metal Industry Co.,Ltd. Senju Manufacturing (Europe) Ltd. Senju Metal Industry Co., Ltd. High-Reliability Lead-Free Solder Paste Manufacturer Senju Metal Industry Co.,Ltd. 23 Senju Hashido-cho, Adachi-Ku, Tokyo, Japan Phone: +81-33888-5156 Fax: +81-33870-3032

More information

Pb V LFH02-E INTRODUCTION SPECIFICATIONS

Pb V LFH02-E INTRODUCTION SPECIFICATIONS Pb V347 3-5LFH02-E NO CLEAN SOLDER PASTE INTRODUCTION Singapore Asahi has developed the Viromet* Series Lead Free alloys. Asahi s No Clean Viromet Lead Free Solder Paste V347 3-5LFH02-E, with a composition

More information

PERSENDA s.n.c MONCALIERI (IT)

PERSENDA s.n.c MONCALIERI (IT) s.n.c. 10024 - MONCALIERI (IT) www.paginegialle.it/persenda persenda@virgilio.it SOLID SOLDER WIRES DESCRIPTION: made in "ecological" alloys, free from Lead, have been formulated as a good alternative

More information

ALPHA Vaculoy SAC300,305,350,400,405 Lead Free Wave Solder Alloy

ALPHA Vaculoy SAC300,305,350,400,405 Lead Free Wave Solder Alloy DESCRIPTION Sn96.5Ag3Cu0.5 and Sn95.5Ag4Cu0.5 and their replenishment alloys Sn97Ag3Cu0, Sn96.5Ag3.5Cu0 and Sn96Ag4Cu0 are lead-free alloys suitable for use as a replacement for Sn63 alloy. The replenishment

More information

DSP 865A (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE

DSP 865A (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 865A (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 60101! 630-628-8083!

More information

Pb-Free Solder Paste M705-LFAC19

Pb-Free Solder Paste M705-LFAC19 Senju Metal Industry Co.,LTD. -Free Solder Paste Manufacturer Senju Metal Industry Co.,Ltd. 23 Senju Hashido-cho, Adachi-Ku, Tokyo, Japan. Phone: (81)-3-3888-5156 Fax: (81)-3-3870-3032-1 ECO SOLDER PASTE

More information

FOR ASIA DSP 618D (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE

FOR ASIA DSP 618D (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE SN96.5/AG3.5. 888 Rev.A TECHNICAL TECHNICAL SPECIFICATIONS DATA SHEET SN96.5/AG3.5. 888 Rev FOR ASIA DSP 618D (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison,

More information

DSP 699 (Sn63/Pb37) SUPER ACTIVITY- HALOGEN FREE NO CLEAN SOLDER PASTE

DSP 699 (Sn63/Pb37) SUPER ACTIVITY- HALOGEN FREE NO CLEAN SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 699 (Sn63/Pb37) SUPER ACTIVITY- HALOGEN FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison,

More information

S3X58-G801. High Performance Low Voiding LF Solder Paste. Product Information. Koki no-clean LEAD FREE solder paste.

S3X58-G801. High Performance Low Voiding LF Solder Paste. Product Information. Koki no-clean LEAD FREE solder paste. www.ko-ki.co.jp #55001-3 First issue: Jan.13, 2017 Revised: Jun. 28, 2017 Koki no-clean LEAD FREE solder paste High Performance Low Voiding LF Solder Paste S3X58-G801 Product Information 0603R 0603R Disclaimer

More information

DSP 618D LEAD FREE NO CLEAN SOLDER PASTE

DSP 618D LEAD FREE NO CLEAN SOLDER PASTE LF217. 618D Rev.A TECHNICAL TECHNICAL SPECIFICATIONS DATA SHEET LF217. 618D Rev DSP 618D LEAD FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 630-628-8083 or 1-800-365-3750

More information

The mechanical properties and microstructures of copper and brass joints soldered with eutectic tin-bismuth solder

The mechanical properties and microstructures of copper and brass joints soldered with eutectic tin-bismuth solder JOURNAL OF MATERIALS SCIENCE 22 (1987) 1835-1839 The mechanical properties and microstructures of copper and brass joints soldered with eutectic tin-bismuth solder W. J. TOMLINSON, I. COLLIER Department

More information

Hot nitrogen for wave soldering A new innovation for increasing quality & productivity of wave soldering machines

Hot nitrogen for wave soldering A new innovation for increasing quality & productivity of wave soldering machines Hot nitrogen for wave soldering A new innovation for increasing quality & productivity of wave soldering machines Laurent Coudurier* Fernand Heine* Didier Orlhac** *Air Liquide technology center / Krefeld

More information

TECHNICAL INFORMATION. Dispensing LEAD FREE No-clean SOLDER PASTE S3X58 - M406D. [ Contents ]

TECHNICAL INFORMATION. Dispensing LEAD FREE No-clean SOLDER PASTE S3X58 - M406D. [ Contents ] Lead free SOLUTIONS you can TRUST TECHNICAL INFORMATION Dispensing LEAD FREE No-clean SOLDER PASTE S3X58 - M406D [ Contents ] 1. FEATURES...Page 2 2. SPECIFICATIONS... 2 3. ALLOY PROPERTIES... 3 4. DISPENSABILITY...

More information

MECHANICAL PROPERTIES OF ALUMINIUM 6063 ALLOY BASED GRAPHITE PARTICLES REINFORCED METAL MATRIX COMPOSITE MATERIAL

MECHANICAL PROPERTIES OF ALUMINIUM 6063 ALLOY BASED GRAPHITE PARTICLES REINFORCED METAL MATRIX COMPOSITE MATERIAL MECHANICAL PROPERTIES OF ALUMINIUM 6063 ALLOY BASED GRAPHITE PARTICLES REINFORCED METAL MATRIX COMPOSITE MATERIAL 1 Sandeep kansari, 2 Ashutosh dwivedi 1 Student of M.tech, 2 professor 1,2 Department of

More information

SN100C Technical Guide

SN100C Technical Guide SN100C Technical Guide INTRODUCTION SN100C is a lead-free tin/copper//germanium alloy. It has been in use since about the year 2000. Since then SN100C has become a world leading alloy in wave and selective

More information

DSP 792 (Sn63/Pb37) WATER SOLUBLE SOLDER PASTE

DSP 792 (Sn63/Pb37) WATER SOLUBLE SOLDER PASTE SN/AG/CU. 862 Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS SN/AG/CU. 862 Rev DSP 792 (Sn63/Pb37) WATER SOLUBLE SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 60101! 630-628-8083!

More information

SAC305 Lead Free Solder Wire (RA) Technical Data Sheet

SAC305 Lead Free Solder Wire (RA) Technical Data Sheet Technical Data Sheet Description The SAC305 Lead Free Solder (RA) is an electronic grade, lead-free solder wire. It uses the predominant lead-free alloy composition and exceeds J-STD-006 purity specifications.

More information

Mechanical and Die Soldering Properties of Al-Si-Mg Alloys with Vacuum HPDC Process

Mechanical and Die Soldering Properties of Al-Si-Mg Alloys with Vacuum HPDC Process Proceedings of the 12th International Conference on uminium loys, September 5-9, 21, Yokohama, Japan 21 The Japan Institute of Light Metals pp. 1768-1773 1768 Mechanical and Soldering Properties of -Si-Mg

More information

Influence of Friction Stir Welding Parameter on Mechanical Properties in Dissimilar (AA6063-AA8011) Aluminium Alloys

Influence of Friction Stir Welding Parameter on Mechanical Properties in Dissimilar (AA6063-AA8011) Aluminium Alloys Influence of Friction Stir Welding Parameter on Mechanical Properties in Dissimilar (AA6063-AA8011) Aluminium Alloys S.Kailainathan* 1, S.Kalyana Sundaram 2, K.Nijanthan 3 1,3 Assistant Professor, Department

More information

DSP 787LV LEAD FREE WATER SOLUBLE SOLDER PASTE

DSP 787LV LEAD FREE WATER SOLUBLE SOLDER PASTE LF217. 798LF Rev.A TECHNICAL TECHNICAL SPECIFICATIONS DATA SHEET LF217. 798LF Rev DSP 787LV LEAD FREE WATER SOLUBLE SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 630-628-8083 or

More information

DSP 865A LEAD FREE NO CLEAN SOLDER PASTE

DSP 865A LEAD FREE NO CLEAN SOLDER PASTE SN/AG/CU. 865A Rev.A TECHNICAL TECHNICAL SPECIFICATIONS DATA SHEET SN/AG/CU. 865A Rev DSP 865A LEAD FREE NO CLEAN SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 630-628-8083 or 1-800-365-3750

More information

Special feature. A.Evaluation of special characteristic. Characteristics R23-C601-3(2006.5) 5. Insulation resistance. ISHIKAWA METAL Co.,Ltd.

Special feature. A.Evaluation of special characteristic. Characteristics R23-C601-3(2006.5) 5. Insulation resistance. ISHIKAWA METAL Co.,Ltd. Special feature This is resin flux cored lead free solder made by Sn and Cu, which can solder easily to Al wire coated by urethane or the other materials. The flux consist of high moisture adsorption materials,

More information

The Effect of Cu and Ni on the Structure and Properties of the IMC Formed by the Reaction of Liquid Sn-Cu Based Solders with Cu Substrate

The Effect of Cu and Ni on the Structure and Properties of the IMC Formed by the Reaction of Liquid Sn-Cu Based Solders with Cu Substrate WDS'08 Proceedings of Contributed Papers, Part III, 220 224, 2008. ISBN 978-80-7378-067-8 MATFYZPRESS The Effect of Cu and Ni on the Structure and Properties of the IMC Formed by the Reaction of Liquid

More information

Carpenter Acube 100 is a

Carpenter Acube 100 is a Beryllium-free Cobalt Alloy for High-load Bushings Richard B. Frank*, Karl A. Heck*, Joseph Stravinskas* Carpenter Technology Corporation Wyomissing, Pennsylvania Co-Cr-Mo alloy offers an excellent combination

More information

Upgrading to ALPHA SACX Plus 0307

Upgrading to ALPHA SACX Plus 0307 the product: Delivering cost effective soldering performance and reliability in both Wave and Selective / Rework Soldering processes Upgrading to ALPHA Plus 0307 ALPHA Plus 0307 Introduction ALPHA Plus

More information

Welcome to the Real World of Lead Free Soldering

Welcome to the Real World of Lead Free Soldering Welcome to the Real World of Lead Free Soldering Metallic Resources, Inc. Howard Stevens Nimal Liyanage,, Ph.D Objective: to Provide Education Regarding the Effects of Various Lead Free Soldering Alloys

More information

DSP 798LF LEAD FREE Water Soluble SOLDER PASTE

DSP 798LF LEAD FREE Water Soluble SOLDER PASTE LF217. 798LF Rev.A TECHNICAL TECHNICAL SPECIFICATIONS DATA SHEET Sn/Ag/Cu, 798LF Rev.C LF217. 798LF Rev DSP 798LF LEAD FREE Water Soluble SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison,

More information

Complete Solder Solutions

Complete Solder Solutions Complete Solder Solutions A NORDSON COMPANY 1 Our Vision EFD Solder Paste Group is the service leader in the solder dispensing market, delivering integrated process solutions through best-in-class performance

More information

Properties of low melting point Sn Zn Bi solders

Properties of low melting point Sn Zn Bi solders Journal of Alloys and Compounds 397 (2005) 260 264 Properties of low melting point Sn Zn Bi solders Jian Zhou, Yangshan Sun, Feng Xue Department of Material Science and Engineering, Southeast University,

More information

Copper & Copper Alloys CuNi1Si (OF 2403)

Copper & Copper Alloys CuNi1Si (OF 2403) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2

More information

S3X58-M ICT Compatible Lead Free Solder Paste. Product Information. Koki no-clean LEAD FREE solder paste. Contents.

S3X58-M ICT Compatible Lead Free Solder Paste. Product Information. Koki no-clean LEAD FREE solder paste.   Contents. Koki no-clean LEAD FREE solder paste www.ko-ki.co.jp #53002 Revised on Mar. 3, 2015 ICT Compatible Lead Free Solder Paste Product Information Conventional Product Picture of ICT Checker Probe The product

More information

Copper & Copper Alloys CuZn31Si1 (OF 2270)

Copper & Copper Alloys CuZn31Si1 (OF 2270) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.

More information

DSP 798LF (Sn/Ag/Cu) LEAD FREE WATER SOLUBLE SOLDER PASTE

DSP 798LF (Sn/Ag/Cu) LEAD FREE WATER SOLUBLE SOLDER PASTE LF217. 798LF Rev.A TECHNICAL DATA SHEET TECHNICAL SPECIFICATIONS LF217. 798LF Rev DSP 798LF (Sn/Ag/Cu) LEAD FREE WATER SOLUBLE SOLDER PASTE CORPORATE HEADQUARTERS USA: 315 Fairbank St. Addison, IL 60101

More information

Research on the FSW of Thick Aluminium

Research on the FSW of Thick Aluminium Research on the FSW of Thick Aluminium Peng Chai, Guohong Luan, Xiaojuan Guo, Shan Wang China FSW Center Beijing FSW Technology Co., Ltd Tel: +86-10-85702230, Fax: +86-10-85702187 Email: chaipeng@cfswt.com,

More information

SMT Adhesive JU - R2S

SMT Adhesive JU - R2S Lead free SOLUTIONS you can TRUST TECHNICAL INFORMATION SMT Adhesive JU - R2S Page 2 of 15 Adhesive to cope with Lead Free soldering and allows self-alignment JU - R2S (SMT heat -cure adhesive in lead

More information

Tensilel Properties of AA6061-T6/SiC p Surface Metal Matrix Composite Produced By Friction Stir Processing

Tensilel Properties of AA6061-T6/SiC p Surface Metal Matrix Composite Produced By Friction Stir Processing Tensilel Properties of AA6061-T6/SiC p Surface Metal Matrix Composite Produced By Friction Stir Processing Devaraju Aruri, Adepu Kumar & B Kotiveerachary Department of Mechanical Engineering, National

More information

A. Feature Good wettability and antioxidation effect of flux

A. Feature Good wettability and antioxidation effect of flux A. Feature wettability and antioxidation effect of flux We have considered active temperature and persistence of flux, and selected activator newly. As results of this, J3-8843-KG has good wettability

More information

STUDIES ON MICROSTRUCTUREAND MECHANICAL PROPERTIES OFMODIFIED LM25 ALUMINIUM ALLOY

STUDIES ON MICROSTRUCTUREAND MECHANICAL PROPERTIES OFMODIFIED LM25 ALUMINIUM ALLOY STUDIES ON MICROSTRUCTUREAND MECHANICAL PROPERTIES OFMODIFIED LM25 ALUMINIUM ALLOY Venkatachalam G 1, Kumaravel A 2,Arun Kumar N 3, Dhanasekaran Rajagopal 4 1,2,4 Department of Mechanical Engineering,

More information

TO STUDY THE MECHANICAL BEHAVIOUR OF FRICTION WELDING OF ALUMINIUM ALLOY AND MILD STEEL

TO STUDY THE MECHANICAL BEHAVIOUR OF FRICTION WELDING OF ALUMINIUM ALLOY AND MILD STEEL Int. J. Mech. Eng. & Rob. Res. 2012 Sandeep Kumar et al., 2012 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 1, No. 3, October 2012 2012 IJMERR. All Rights Reserved TO STUDY THE MECHANICAL BEHAVIOUR

More information

Evolution of Microstructure and Hardness of Aluminium 6061 after Friction Stir Welding

Evolution of Microstructure and Hardness of Aluminium 6061 after Friction Stir Welding International Journal of Theoretical and Applied Mechanics. ISSN 0973-6085 Volume 12, Number 3 (2017) pp. 405-410 Research India Publications http://www.ripublication.com Evolution of Microstructure and

More information

Composition/wt% Bal SA2 (SABI) Bal SA3 (SABI + Cu) Bal

Composition/wt% Bal SA2 (SABI) Bal SA3 (SABI + Cu) Bal Improving Thermal Cycle and Mechanical Drop Impact Resistance of a Lead-free Tin-Silver-Bismuth-Indium Solder Alloy with Minor Doping of Copper Additive Takehiro Wada 1, Seiji Tsuchiya 1, Shantanu Joshi

More information

High-reliability Low-Ag Alloy

High-reliability Low-Ag Alloy http://www.ko-ki.co.jp #47002E 2009.8.18 Koki no-clean LEAD FREE solder paste High-reliability Low-Ag Alloy PAT. pend Product information Sn0.3Ag0.7Cu S01X7C- alloy After -40+125ºC 1500cycle This Product

More information

New Pb-Free Solder Alloy for Demanding Applications. Presented by Karl Seelig, VP Technology, AIM

New Pb-Free Solder Alloy for Demanding Applications. Presented by Karl Seelig, VP Technology, AIM New Pb-Free Solder Alloy for Demanding Applications Presented by Karl Seelig, VP Technology, AIM Why REL? The evolution and expansion of electronics into more harsh operating environments performing more

More information

IMPROVEMENT OF MECHANICAL PROPERTIES IN FE-MN-TI STEEL BY ALLOYING WITH CR AND MO , Tehran, Iran. Tabriz, Iran

IMPROVEMENT OF MECHANICAL PROPERTIES IN FE-MN-TI STEEL BY ALLOYING WITH CR AND MO , Tehran, Iran. Tabriz, Iran IMPROVEMENT OF MECHANICAL PROPERTIES IN FE-MN-TI STEEL BY ALLOYING WITH CR AND MO M. Nili-Ahmadabadi a, S. Hossein Nedjad b, M. Sadeghi a and H. Shirazi a a Deptartment of Metallurgy and Materials Engineering,

More information

ANALYSIS OF RING AND PLUG SHEAR STRENGTHS FOR COMPARISON OF LEAD FREE SOLDERS

ANALYSIS OF RING AND PLUG SHEAR STRENGTHS FOR COMPARISON OF LEAD FREE SOLDERS ANALYSIS OF RING AND PLUG SHEAR STRENGTHS FOR COMPARISON OF LEAD FREE SOLDERS J.C. Foley, A. Gickler, F.H. LePrevost, and D. Brown Ames Laboratory, 122 Metals Development, Ames, IA 50011, Johnson Manufacturing

More information

Various Techniques for Reliability Estimation and Failure Analysis of Electronic Products and Components

Various Techniques for Reliability Estimation and Failure Analysis of Electronic Products and Components JFE No. 13 2006 8 p. 97 102 Various Techniques for Reliability Estimation and Failure Analysis of Electronic Products and Components BAN Mitsuyuki SHIMAUCHI Yutaka JFE JFE JFE X IC Pb Abstract: JFE Techno-Research

More information

Copper & Copper Alloys CuZn40Pb2 (OF 2357)

Copper & Copper Alloys CuZn40Pb2 (OF 2357) Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2

More information

10.6 Schedule of Accreditation

10.6 Schedule of Accreditation Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories

More information

Pb-FREE SOLDER PASTE TLF SERIES LFSOLDER TLF

Pb-FREE SOLDER PASTE TLF SERIES LFSOLDER TLF 2002.3 TAMURA PRODUCT INFORMATION Pb-FREE SOLDER PASTE TLF SERIES LFSOLDER TLF-501-27 LFSOLDER TLF-501-27 is a solder paste, using special flux and spherical solder powder of Pb-free(SnSb). As the paste

More information

SPECIFICATION. NAME : ALMIT SRC Solder Paste LFM 48 X TM-HP

SPECIFICATION. NAME : ALMIT SRC Solder Paste LFM 48 X TM-HP SPECIFICATION NAME : ALMIT SRC Solder Paste LFM 48 X TM-HP Lot No. Marketing Name LFM 48 X TM-HP Flux content 12.0% Solder Powder Size: 25-45 (μm) NIHON ALMIT Co. Ltd. Head Office: Almit Bldg., 2-14-2,

More information

The effect of Friction Stir Processing on the fatigue life of MIG-Laser hybrid welded joints as compared to conventional FSW 6082-T6 aluminium joints

The effect of Friction Stir Processing on the fatigue life of MIG-Laser hybrid welded joints as compared to conventional FSW 6082-T6 aluminium joints Surface Effects and Contact Mechanics IX 183 The effect of Friction Stir Processing on the fatigue life of MIG-Laser hybrid welded joints as compared to conventional FSW 6082-T6 aluminium joints A. Els-Botes,

More information

Copper & Copper Alloys CuZn38Pb2 (OF 2361)

Copper & Copper Alloys CuZn38Pb2 (OF 2361) Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information

More information

MSE 513 Homework #1 Due Jan. 21, 2013

MSE 513 Homework #1 Due Jan. 21, 2013 Reading: My class notes, pgs. 22-27. http://www1.asminternational.org/asmenterprise/apd/help/help.aspx Introduction to Phase diagrams, particularly: o Common terms o Binary diagrams o Features of phase

More information

SILVER BRAZING Alloys and Fluxes Product Guide

SILVER BRAZING Alloys and Fluxes Product Guide SILVER BRAZING Alloys and Fluxes Product Guide PIKAS d.o.o. Brunov drevored 11 SI - 5220 TOLMIN Tel.: +386 5 381 03 84 Fax: +386 5 381 03 87 E-mail: pikas@pikas.si Internet: www.pikas.si UNIVERSAL SILVER

More information

Copper Alloy. LEADED Red BRASS ( ) C Al Amana Foundry We Make The Quality By Experience And Science

Copper Alloy. LEADED Red BRASS ( ) C Al Amana Foundry We Make The Quality By Experience And Science LEADED Red BRASS (85-5-5-5) C83600 Tensile Strength, Ksi 30 Tensile Strength, Mpa 207 Yield Strength, Ksi 14 Yield Strength, Mpa 97 Elongation in 2 inch 20 Density g/cm3 8.83 Electrical Conductivity IACS

More information

Repair of Structural Steel Surface Groove by Using Flame Welding Method by Spraying Pure Iron Powder

Repair of Structural Steel Surface Groove by Using Flame Welding Method by Spraying Pure Iron Powder A R C H I V E S of F O U N D R Y E N G I N E E R I N G Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (897-330) Volume 6 Issue 3/206 67 7 34/3 Repair

More information

Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)

Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291) Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.

More information

ALPHA SACX Plus 0307 NEW! Product Guide

ALPHA SACX Plus 0307 NEW! Product Guide the product: Delivering cost effective soldering performance and reliability in both Wave and Selective / Rework Soldering processes NEW! ALPHA SACX Plus 0307 Product Guide Introduction ALPHA SACX Plus

More information

Experimental Investigation on Mechanical Behavior s of Stir Cast Aluminium 6061-SiC MMC using Taguchi Technique

Experimental Investigation on Mechanical Behavior s of Stir Cast Aluminium 6061-SiC MMC using Taguchi Technique International Research Journal of Engineering and Technology (IRJET) e-issn: 235-005 Experimental Investigation on Mechanical Behavior s of Stir ast Aluminium 01-Si MM using Taguchi Technique. Manikandan

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk

More information

LOW TEMPERATURE ALLOY DEVELOPMENT FOR ELECTRONICS ASSEMBLY PART II

LOW TEMPERATURE ALLOY DEVELOPMENT FOR ELECTRONICS ASSEMBLY PART II LOW TEMPERATURE ALLOY DEVELOPMENT FOR ELECTRONICS ASSEMBLY PART II Morgana Ribas, Ph.D., Sujatha Chegudi, Anil Kumar, Sutapa Mukherjee, Siuli Sarkar, Ph.D. Alpha, an Alent plc Company Bangalore, KA, India

More information

Koki no-clean LEAD FREE solder paste. High-reliability Low Ag Lead Free Solder Paste

Koki no-clean LEAD FREE solder paste. High-reliability Low Ag Lead Free Solder Paste www.ko-ki.co.jp #514- Revised on Feb.4, 214 Koki no-clean LEAD FREE solder paste High-reliability Low Ag Lead Free Solder Paste S1XBIG58-M5-4 Product information S1XBIG SAC35 After -4/125ºC, 1 cycles This

More information

ATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of

ATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION Lead free SOLUTIONS you can TRUST TECHNICAL INFORMATION No-clean Wave Soldering for Lead Free Soldering 1. Features Designed to work with Sn(Ag)(Bi)Cu lead free solders. Ensures excellent solderability

More information

related to the welding of aluminium are due to its high thermal conductivity, high

related to the welding of aluminium are due to its high thermal conductivity, high Chapter 7 COMPARISON FSW WELD WITH TIG WELD 7.0 Introduction Aluminium welding still represents a critical operation due to its complexity and the high level of defect that can be produced in the joint.

More information

Senju Sparkle Paste OZ CM

Senju Sparkle Paste OZ CM 1 Technical Bulletin 1998-09-003c Senju Metal Industry Co. Ltd. NO-CLEAN SOLDER PASTE Senju Sparkle Paste OZ 2062-221CM5-40-10 Headquarter Facility ItalianDistributor Senju Metal Industry Co. Ltd MA.COMP

More information

Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)

Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.

More information

Manufacturing of electronic equipment

Manufacturing of electronic equipment Manufacturing of electronic equipment 13.10.2016 Objective: To give a generic understanding on the manufacturing methods and 2 nd level interconnection materials of electronic equipments Literature: K.

More information

Improving Electrode Life for RSW of Coated Advanced High Strength Steel

Improving Electrode Life for RSW of Coated Advanced High Strength Steel Improving Electrode Life for RSW of Coated Advanced High Strength Steel D. Huh, Z. Jiao, Y. Zhou Centre for Advanced Materials Joining, University of Waterloo, 200 University Ave. W, Waterloo, ON N2L 3G1,

More information

S3X48-M500C-5. Powerful Wetting Lead Free Solder Paste. Product information. Koki no-clean LEAD FREE solder paste. Contents.

S3X48-M500C-5. Powerful Wetting Lead Free Solder Paste. Product information. Koki no-clean LEAD FREE solder paste.   Contents. Koki no-clean LEAD FREE solder paste www.ko-ki.co.jp #50011E-0 Revised on JAN.22, 2013 Powerful Wetting Lead Free Solder Paste Product information This Product Information contains product performance

More information

Hi-performance S3X58-M406

Hi-performance S3X58-M406 www.ko-ki.co.jp Ver. 42004.5 Prepared on Mar. 7, 2005 Koki no-clean LEAD FREE solder paste Hi-performance Product information 0.4mm pitch 0.3mm diameter This Product Information contains product performance

More information

Friction Stir Welding of Iron and Nickel Alloys

Friction Stir Welding of Iron and Nickel Alloys Friction Stir Welding of Iron and Nickel Alloys Carl D. Sorensen Brigham Young University Acknowledgements Tool materials and fabrication provided by Megastir Technologies, a business alliance between

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: San Nicolás de los Garza, N.L. 66460 (Hereinafter

More information

Copper & Copper Alloys CuZn38As (OF 2765)

Copper & Copper Alloys CuZn38As (OF 2765) Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2

More information

Effects of SAC Alloy Copper Dissolution Rates on PTH Processes: Cost and performance justify use of certain alternatives to SAC305/405

Effects of SAC Alloy Copper Dissolution Rates on PTH Processes: Cost and performance justify use of certain alternatives to SAC305/405 Effects of SAC Alloy Copper Dissolution Rates on PTH Processes: Cost and performance justify use of certain alternatives to SAC305/405 1 Craig Hamilton, Polina Snugovsky (Celestica) & Matthew Kelly (IBM)

More information

PROPERTIES OF FREE MACHINING ALUMINIUM ALLOYS AT ELEVATED TEMPERATURES. Ji í Faltus, Petr Homola, Peter Sláma

PROPERTIES OF FREE MACHINING ALUMINIUM ALLOYS AT ELEVATED TEMPERATURES. Ji í Faltus, Petr Homola, Peter Sláma PROPERTIES OF FREE MACHINING ALUMINIUM ALLOYS AT ELEVATED TEMPERATURES Ji í Faltus, Petr Homola, Peter Sláma VÚK Panenské B e any a.s., Panenské B e any 50, 250 70 Odolena Voda E-mail: faltus@vukpb.cz

More information

Testing Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current Capability P

Testing Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current Capability P Application Notes Testing Procedures SMD Soldering Recommendations 57 Testing Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current

More information

SMD RFI CLIP Data Sheet

SMD RFI CLIP Data Sheet 1/14 Attn : Data Sheet - CONDITION : 1. 2. 3. 4. We approved the product as above. WRITE REVIEW APPROVAL ICT NAME S.P. HONG J.E. KIM S.K,JUNG SIGNATURE Supplier : Innochips Technology CO., LTD By President

More information