Drilling System. ATI Stellram tooling systems for all your drilling requirements.

Transcription

1 Drilling System ATI Stellram tooling systems for all your drilling requirements.

2 All ATI Stellram s products are supported by a highly technical sales team backed by an extensive customer care policy. lease contact us for additional information on any of the products illustrated in this catalog or any other part of ATI Stellram s comprehensive tooling programme. TOLL FREE CUSTOER SERVICE UITED STATES TEL: FAX: CAADA TEL: FAX: EXICO TEL: FAX: The ATI Advantage Stainless steels, titanium and titanium alloys, nickel based alloys, silicon electrical steels, armor materials and tool steels. Titanium based alloys, nickel based and cobalt based alloys, specialty alloys. Zirconium, hafnium, niobium, titanium alloys. Gray and ductile iron casting. Carbon and alloy steel forgings. Specialised machining and finishing for titanium mill products. SOLUTIOS FOR DIFFICULT TO ACIE ATERIALS

3 The Technology Two grades of carbide in one tool can mean as much as four times the performance. ATI Stellram is positioned to change the way the metal cutting industry thinks, with a brand new patented technology that combines two grades of carbide into one tool. (US atent: 6,511,265 and foreign pending) ATI Stellram s new ARDCORE technology offers a unique design so that the optimum carbide grade is used at critical points, enhancing performance and improving tool life. One carbide grade here Another in the centre ARDCORE technology eliminated the need for compromise, dramatically improving performance. The Advantages ARDCORE technology drills will cut faster, last longer and produce up to 4 times the number of holes, with better surface quality, than any other high performance drill available in today s market. The erformance The outer edges of a drill bit are running at tremendous speed, while the point is basically stationary. The carbide grade chosen had to compensate for this and there was a compromise performance for durability. In the past, this has meant that the bit is prone to chipping at certain points, which is a critical factor in maintenance and reduced tool life. The ARDCORE technology consists in having two grades of carbide one tailored to the high speed of the tool s outer diameter and another resilient enough to handle the slow speed of the tool centre. Testing shows that the new hardcore technology greatly reduces wear. And because the carbide grade is optimised for the different portions of the tool, operating speeds can be increased. We ve tested ARDCORE technology by ATI Stellram against some of the best products in the business and the results are astounding. Figure 1. Shows chipping along the cutting edge, on a reputable high performance drill that is currently in the market, after just 8 minutes into its drilling cycle. Figure 2. ATI Stellram ARDCORE technology drill shows uniform wear along the cutting edge after continuous use, running at a higher surface speed and feed. ono Block Carbide ARDCORE Technology Fig. 1 Fig. 2 1

4 The ARDCORE aterial atented process for the substrate design and process, manufactured by ATI Stellram (US atent: 6,511,265). Unique bonding of 2 micrograin carbides. ATI Stellram s patented process allows the two micrograin substrates to be co-extruded around each other to produce optimum grades positioned at the critical parts of the tool to improve durability and allow faster operation. This allows the ARDCORE technology drill to penetrate materials at higher feed rates than existing high performance drills available in the market today. The technology eliminates the risk of drill point breakage, which is typical for these at high speeds and feeds, due to the variance in surface speeds between periphery and the point. aterial application example: Customer C. Drill: SD1050/0.413/301 A CT600 aterial B, Drilling depth: 33mm V c : 91m/min 295fpm f: 0.25mm/tr 0.01ipr V f : 680mm/min 26.8ipm 814 holes 36 minutes Technology Tough core ensures shock resistance igh hardness improves wear resistance 2

5 Drill Description Features Accurate ground edge preparation Excellent designed flute profile for best chip evacuation 140º point angle geometry produced to zero run out Grade: CT600 TiAl structure ano Thickness 4 microns Wear resistance and limitation of the temperature diffusion Unique design in the market. The combination of the unique ARDCORE material, the specially designed tool geometry and a precise grinding process provides a tremendous productivity increase. 3

6 omenclature StellDrill ARDCORE Series 301 S D 0317 / / 301 A CT600 Type Diameter mm Diameter inch Series Ratio according DI6537K Shank Grade StellDrill ARDCORE Series 501 S D 0317 / / 501 E CT600 Type Diameter mm Diameter inch Series Ratio according DI6537L Shank Grade lease note: the shank description is in accordance with DI6535. A = cylindrical shank E = inclined clamping flat / whistle notch AK = cylindrical shank internal coolant holes EK = inclined clamping flat / whistle notch internal coolant holes Drilling tolerances Common standard: DI 6537 Shank tolerance: (d 2 ) h6 Drill tolerance: (d 1 ) m7 ole tolerance: IT 8-9 Surface quality: R a 1-2 By drilling low carbon steel or stainless steel, the surface quality may be slightly inferior. Drill tolerance metric d ,012 / + 0,002 d ,016 / + 0,004 d ,021 / + 0,006 d ,025 / + 0,007 Drill tolerance inch d 1 0, , / + 0, d 1 0,118 0, , / + 0, d 1 0,236 0, , / + 0, d 1 0,394 0, , / + 0,

7 140º Series 301 d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0300/0.118/301A CT600 3,00 0, , , , , , SD0300/0.118/301E CT600 3,00 0, , , , , , SD0310/0.122/301A CT600 3,10 0, , , , , , SD0310/0.122/301E CT600 3,10 0, , , , , , SD0317/0.125/301A CT600 3,17 1/8 6 0, , , , , SD0317/0.125/301E CT600 3,17 1/8 6 0, , , , , SD0320/0.126/301A CT600 3,20 0, , , , , , SD0320/0.126/301E CT600 3,20 0, , , , , , SD0330/0.130/301A CT600 3,30 0, , , , , , SD0330/0.130/301E CT600 3,30 0, , , , , , SD0340/0.134/301A CT600 3,40 0, , , , , , SD0340/0.134/301E CT600 3,40 0, , , , , , SD0350/0.138/301A CT600 3,50 0, , , , , , SD0350/0.138/301E CT600 3,50 0, , , , , , SD0357/0.140/301A CT600 3,57 9/64 6 0, , , , , SD0357/0.140/301E CT600 3,57 9/64 6 0, , , , , SD0360/0.142/301A CT600 3,60 0, , , , , , SD0360/0.142/301E CT600 3,60 0, , , , , , SD0370/0.146/301A CT600 3,70 0, , , , , , SD0370/0.146/301E CT600 3,70 0, , , , , , SD0380/0.150/301A CT600 3,80 0, , , , , , SD0380/0.150/301E CT600 3,80 0, , , , , , SD0390/0.154/301A CT600 3,90 0, UC 6 0, , , , , SD0390/0.154/301E CT600 3,90 0, UC 6 0, , , , , SD0397/0.156/301A CT600 3,97 5/32 6 0, , , , , SD0397/0.156/301E CT600 3,97 5/32 6 0, , , , , SD0400/0.157/301A CT600 4,00 0, , , , , , SD0400/0.157/301E CT600 4,00 0, , , , , , SD0410/0.161/301A CT600 4,10 0, UF 6 0, , , , , SD0410/0.161/301E CT600 4,10 0, UF 6 0, , , , , SD0420/0.165/301A CT600 4,20 0, , , , , , SD0420/0.165/301E CT600 4,20 0, , , , , , SD0430/0.169/301A CT600 4,30 0, , , , , , SD0430/0.169/301E CT600 4,30 0, , , , , , SD0437/0.172/301A CT600 4,37 11/64 6 0, , , , , SD0437/0.172/301E CT600 4,37 11/64 6 0, , , , , SD0440/0.173/301A CT600 4,40 0, , , , , , SD0440/0.173/301E CT600 4,40 0, , , , , , SD0450/0.177/301A CT600 4,50 0, , , , , , SD0450/0.177/301E CT600 4,50 0, , , , , ,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 5

8 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0460/0.181/301A CT600 4,60 0, , , , , , SD0460/0.181/301E CT600 4,60 0, , , , , , SD0470/0.185/301A CT600 4,70 0, , , , , , SD0470/0.185/301E CT600 4,70 0, , , , , , SD0476/0.187/301A CT600 4,76 3/16 6 0, , , , , SD0476/0.187/301E CT600 4,76 3/16 6 0, , , , , SD0480/0.189/301A CT600 4,80 0, UF 6 0, , , , , SD0480/0.189/301E CT600 4,80 0, UF 6 0, , , , , SD0490/0.193/301A CT600 4,90 0, , , , , , SD0490/0.193/301E CT600 4,90 0, , , , , , SD0500/0.197/301A CT600 5,00 0, , , , , , SD0500/0.197/301E CT600 5,00 0, , , , , , SD0510/0.201/301A CT600 5,10 0, , , , , , SD0510/0.201/301E CT600 5,10 0, , , , , , SD0516/0.203/301A CT600 5,16 13/64 6 0, , , , , SD0516/0.203/301E CT600 5,16 13/64 6 0, , , , , SD0520/0.205/301A CT600 5,20 0, , , , , , SD0520/0.205/301E CT600 5,20 0, , , , , , SD0530/0.209/301A CT600 5,30 0, , , , , , SD0530/0.209/301E CT600 5,30 0, , , , , , SD0540/0.213/301A CT600 5,40 0, , , , , , SD0540/0.213/301E CT600 5,40 0, , , , , , SD0550/0.217/301A CT600 5,50 0, , , , , , SD0550/0.217/301E CT600 5,50 0, , , , , , SD0556/0.219/301A CT600 5,56 7/32 6 0, , , , , SD0556/0.219/301E CT600 5,56 7/32 6 0, , , , , SD0560/0.220/301A CT600 5,60 0, , , , , , SD0560/0.220/301E CT600 5,60 0, , , , , , SD0570/0.224/301A CT600 5,70 0, , , , , , SD0570/0.224/301E CT600 5,70 0, , , , , , SD0580/0.228/301A CT600 5,80 0, , , , , , SD0580/0.228/301E CT600 5,80 0, , , , , , SD0590/0.232/301A CT600 5,90 0, , , , , , SD0590/0.232/301E CT600 5,90 0, , , , , , SD0595/0.234/301A CT600 5,95 15/64 6 0, , , , , SD0595/0.234/301E CT600 5,95 15/64 6 0, , , , , SD0600/0.236/301A CT600 6,00 0, , , , , , SD0600/0.236/301E CT600 6,00 0, , , , , , SD0610/0.240/301A CT600 6,10 0, , , , , , SD0610/0.240/301E CT600 6,10 0, , , , , ,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 6 Stainless ard aterials

9 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0620/0.244/301A CT600 6,20 0, , , , , , SD0620/0.244/301E CT600 6,20 0, , , , , , SD0630/0.248/301A CT600 6,30 0, , , , , , SD0630/0.248/301E CT600 6,30 0, , , , , , SD0635/0.250/301A CT600 6,35 1/4 8 0, , , , , SD0635/0.250/301E CT600 6,35 1/4 8 0, , , , , SD0640/0.252/301A CT600 6,40 0, , , , , , SD0640/0.252/301E CT600 6,40 0, , , , , , SD0650/0.256/301A CT600 6,50 0, , , , , , SD0650/0.256/301E CT600 6,50 0, , , , , , SD0660/0.260/301A CT600 6,60 0, , , , , , SD0660/0.260/301E CT600 6,60 0, , , , , , SD0670/0.264/301A CT600 6,70 0,264 5/18-18UF 8 0, , , , , SD0670/0.264/301E CT600 6,70 0,264 5/18-18UF 8 0, , , , , SD0675/0.266/301A CT600 6,75 17/64 8 0, , , , , SD0675/0.266/301E CT600 6,75 17/64 8 0, , , , , SD0680/0.268/301A CT600 6,80 0, , , , , , SD0680/0.268/301E CT600 6,80 0, , , , , , SD0690/0.272/301A CT600 6,90 0, , , , , , SD0690/0.272/301E CT600 6,90 0, , , , , , SD0700/0.276/301A CT600 7,00 0, , , , , , SD0700/0.276/301E CT600 7,00 0, , , , , , SD0710/0.280/301A CT600 7,10 0,280 F8x1 8 0, , , , , SD0710/0.280/301E CT600 7,10 0,280 F8x1 8 0, , , , , SD0714/0.281/301A CT600 7,14 9/32 8 0, , , , , SD0714/0.281/301E CT600 7,14 9/32 8 0, , , , , SD0720/0.283/301A CT600 7,20 0, , , , , , SD0720/0.283/301E CT600 7,20 0, , , , , , SD0730/0.287/301A CT600 7,30 0, , , , , , SD0730/0.287/301E CT600 7,30 0, , , , , , SD0740/0.291/301A CT600 7,40 0, , , , , , SD0740/0.291/301E CT600 7,40 0, , , , , , SD0750/0.295/301A CT600 7,50 0, , , , , , SD0750/0.295/301E CT600 7,50 0, , , , , , SD0754/0.297/301A CT600 7,54 19/64 8 0, , , , , SD0754/0.297/301E CT600 7,54 19/64 8 0, , , , , SD0760/0.299/301A CT600 7,60 0, , , , , , SD0760/0.299/301E CT600 7,60 0, , , , , , SD0770/0.303/301A CT600 7,70 0, , , , , , SD0770/0.303/301E CT600 7,70 0, , , , , ,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 7

10 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0780/0.307/301A CT600 7,80 0, , , , , , SD0780/0.307/301E CT600 7,80 0, , , , , , SD0790/0.311/301A CT600 7,90 0, , , , , , SD0790/0.311/301E CT600 7,90 0, , , , , , SD0794/0.313/301A CT600 7,94 5/16 8 0, , , , , SD0794/0.313/301E CT600 7,94 5/16 8 0, , , , , SD0800/0.315/301A CT600 8,00 0, , , , , , SD0800/0.315/301E CT600 8,00 0, , , , , , SD0810/0.319/301A CT600 8,10 0, , , , , , SD0810/0.319/301E CT600 8,10 0, , , , , , SD0820/0.323/301A CT600 8,20 0, , , , , , SD0820/0.323/301E CT600 8,20 0, , , , , , SD0830/0.327/301A CT600 8,30 0, , , , , , SD0830/0.327/301E CT600 8,30 0, , , , , , SD0833/0.328/301A CT600 8,33 21/ , , , , , SD0833/0.328/301E CT600 8,33 21/ , , , , , SD0840/0.331/301A CT600 8,40 0, , , , , , SD0840/0.331/301E CT600 8,40 0, , , , , , SD0850/0.335/301A CT600 8,50 0, , , , , , SD0850/0.335/301E CT600 8,50 0, , , , , , SD0860/0.339/301A CT600 8,60 0,339 3/8-24 UF 10 0, , , , , SD0860/0.339/301E CT600 8,60 0,339 3/8-24 UF 10 0, , , , , SD0870/0.343/301A CT600 8,70 0, , , , , , SD0870/0.343/301E CT600 8,70 0, , , , , , SD0873/0.344/301A CT600 8,73 11/ , , , , , SD0873/0.344/301E CT600 8,73 11/ , , , , , SD0880/0.346/301A CT600 8,80 0, , , , , , SD0880/0.346/301E CT600 8,80 0, , , , , , SD0890/0.350/301A CT600 8,90 0,350 F10x1, , , , , , SD0890/0.350/301E CT600 8,90 0,350 F10x1, , , , , , SD0900/0.354/301A CT600 9,00 0, , , , , , SD0900/0.354/301E CT600 9,00 0, , , , , , SD0910/0.358/301A CT600 9,10 0, , , , , , SD0910/0.358/301E CT600 9,10 0, , , , , , SD0913/0.359/301A CT600 9,13 23/ , , , , , SD0913/0.359/301E CT600 9,13 23/ , , , , , SD0920/0.362/301A CT600 9,20 0, , , , , , SD0920/0.362/301E CT600 9,20 0, , , , , , SD0930/0.366/301A CT600 9,30 0, , , , , , SD0930/0.366/301E CT600 9,30 0, , , , , ,575 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 8 Stainless ard aterials

11 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0940/0.370/301A CT600 9,40 0, , , , , , SD0940/0.370/301E CT600 9,40 0, , , , , , SD0950/0.374/301A CT600 9,50 0, , , , , , SD0950/0.374/301E CT600 9,50 0, , , , , , SD0952/0.375/301A CT600 9,52 3/8 10 0, , , , , SD0952/0.375/301E CT600 9,52 3/8 10 0, , , , , SD0960/0.378/301A CT600 9,60 0, , , , , , SD0960/0.378/301E CT600 9,60 0, , , , , , SD0970/0.382/301A CT600 9,70 0, , , , , , SD0970/0.382/301E CT600 9,70 0, , , , , , SD0980/0.386/301A CT600 9,80 0, , , , , , SD0980/0.386/301E CT600 9,80 0, , , , , , SD0990/0.390/301A CT600 9,90 0, , , , , , SD0990/0.390/301E CT600 9,90 0, , , , , , SD0992/0.391/301A CT600 9,92 25/ , , , , , SD0992/0.391/301E CT600 9,92 25/ , , , , , SD1000/0.394/301A CT600 10,00 0,394 7/16-20 UF 10 0, , , , , SD1000/0.394/301E CT600 10,00 0,394 7/16-20 UF 10 0, , , , , SD1010/0.398/301A CT600 10,10 0, , , , , , SD1010/0.398/301E CT600 10,10 0, , , , , , SD1020/0.402/301A CT600 10,20 0, , , , , , SD1020/0.402/301E CT600 10,20 0, , , , , , SD1030/0.406/301A CT600 10,30 0, , , , , , SD1030/0.406/301E CT600 10,30 0, , , , , , SD1032/0.407/301A CT600 10,32 13/ , , , , , SD1032/0.407/301E CT600 10,32 13/ , , , , , SD1040/0.409/301A CT600 10,40 0, , , , , , SD1040/0.409/301E CT600 10,40 0, , , , , , SD1050/0.413/301A CT600 10,50 0, , , , , , SD1050/0.413/301E CT600 10,50 0, , , , , , SD1060/0.417/301A CT600 10,60 0, , , , , , SD1060/0.417/301E CT600 10,60 0, , , , , , SD1070/0.421/301A CT600 10,70 0,421 F12x1,5 12 0, , , , , SD1070/0.421/301E CT600 10,70 0,421 F12x1,5 12 0, , , , , SD1080/0.425/301A CT600 10,80 0, , , , , , SD1080/0.425/301E CT600 10,80 0, , , , , , SD1090/0.429/301A CT600 10,90 0, , , , , , SD1090/0.429/301E CT600 10,90 0, , , , , , SD1100/0.433/301A CT600 11,00 0, , , , , , SD1100/0.433/301E CT600 11,00 0, , , , , ,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 9

12 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD1110/0.437/301A CT600 11,10 0, , , , , , SD1110/0.437/301E CT600 11,10 0, , , , , , SD1120/0.441/301A CT600 11,20 0, , , , , , SD1120/0.441/301E CT600 11,20 0, , , , , , SD1130/0.445/301A CT600 11,30 0, , , , , , SD1130/0.445/301E CT600 11,30 0, , , , , , SD1140/0.449/301A CT600 11,40 0, , , , , , SD1140/0.449/301E CT600 11,40 0, , , , , , SD1150/0.453/301A CT600 11,50 0, , , , , , SD1150/0.453/301E CT600 11,50 0, , , , , , SD1151/0.453/301A CT600 11,51 29/ , , , , , SD1151/0.453/301E CT600 11,51 29/ , , , , , SD1160/0.457/301A CT600 11,60 0,457 1/2-20 UF 12 0, , , , , SD1160/0.457/301E CT600 11,60 0,457 1/2-20 UF 12 0, , , , , SD1170/0.461/301A CT600 11,70 0, , , , , , SD1170/0.461/301E CT600 11,70 0, , , , , , SD1180/0.465/301A CT600 11,80 0, , , , , , SD1180/0.465/301E CT600 11,80 0, , , , , , SD1190/0.469/301A CT600 11,90 0, , , , , , SD1190/0.469/301E CT600 11,90 0, , , , , , SD1200/0.472/301A CT600 12,00 0, , , , , , SD1200/0.472/301E CT600 12,00 0, , , , , , SD1210/0.476/301A CT600 12,10 0, , , , , , SD1210/0.476/301E CT600 12,10 0, , , , , , SD1220/0.480/301A CT600 12,20 0, , , , , , SD1220/0.480/301E CT600 12,20 0, , , , , , SD1230/0.484/301A CT600 12,30 31/ , , , , , SD1230/0.484/301E CT600 12,30 31/ , , , , , SD1240/0.488/301A CT600 12,40 0, , , , , , SD1240/0.488/301E CT600 12,40 0, , , , , , SD1250/0.492/301A CT600 12,50 0, , , , , , SD1250/0.492/301E CT600 12,50 0, , , , , , SD1260/0.496/301A CT600 12,60 0, , , , , , SD1260/0.496/301E CT600 12,60 0, , , , , , SD1270/0.500/301A CT600 12,70 1/2 14 0, , , , , SD1270/0.500/301E CT600 12,70 1/2 14 0, , , , , SD1280/0.504/301A CT600 12,80 0, , , , , , SD1280/0.504/301E CT600 12,80 0, , , , , , SD1290/0.508/301A CT600 12,90 0, , , , , , SD1290/0.508/301E CT600 12,90 0, , , , , ,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 10 Stainless ard aterials

13 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD1300/0.512/301A CT600 13,00 0, , , , , , SD1300/0.512/301E CT600 13,00 0, , , , , , SD1310/0.516/301A CT600 13,10 0, , , , , , SD1310/0.516/301E CT600 13,10 0, , , , , , SD1320/0.520/301A CT600 13,20 0, , , , , , SD1320/0.520/301E CT600 13,20 0, , , , , , SD1330/0.524/301A CT600 13,30 0, , , , , , SD1330/0.524/301E CT600 13,30 0, , , , , , SD1340/0.528/301A CT600 13,40 0, , , , , , SD1340/0.528/301E CT600 13,40 0, , , , , , SD1350/0.531/301A CT600 13,50 0, , , , , , SD1350/0.531/301E CT600 13,50 0, , , , , , SD1360/0.535/301A CT600 13,60 0, , , , , , SD1360/0.535/301E CT600 13,60 0, , , , , , SD1370/0.539/301A CT600 13,70 0, , , , , , SD1370/0.539/301E CT600 13,70 0, , , , , , SD1380/0.543/301A CT600 13,80 0, , , , , , SD1380/0.543/301E CT600 13,80 0, , , , , , SD1389/0.547/301A CT600 13,89 35/ , , , , , SD1389/0.547/301E CT600 13,89 35/ , , , , , SD1400/0.551/301A CT600 14,00 0, , , , , , SD1400/0.551/301E CT600 14,00 0, , , , , , SD1410/0.555/301A CT600 14,10 0, , , , , , SD1410/0.555/301E CT600 14,10 0, , , , , , SD1420/0.559/301A CT600 14,20 0, , , , , , SD1420/0.559/301E CT600 14,20 0, , , , , , SD1429/0.562/301A CT600 14,29 9/ , , , , , SD1429/0.562/301E CT600 14,29 9/ , , , , , SD1430/0.563/301A CT600 14,30 0, , , , , , SD1430/0.563/301E CT600 14,30 0, , , , , , SD1440/0.567/301A CT600 14,40 0, , , , , , SD1440/0.567/301E CT600 14,40 0, , , , , , SD1450/0.571/301A CT600 14,50 0, , , , , , SD1450/0.571/301E CT600 14,50 0, , , , , , SD1460/0.575/301A CT600 14,60 0, , , , , , SD1460/0.575/301E CT600 14,60 0, , , , , , SD1470/0.579/301A CT600 14,70 0, , , , , , SD1470/0.579/301E CT600 14,70 0, , , , , , SD1480/0.583/301A CT600 14,80 0, , , , , , SD1480/0.583/301E CT600 14,80 0, , , , , ,890 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 11

14 140º Series 301Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 301 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD1490/0.587/301A CT600 14,90 0, , , , , , SD1490/0.587/301E CT600 14,90 0, , , , , , SD1500/0.591/301A CT600 15,00 0, , , , , , SD1500/0.591/301E CT600 15,00 0, , , , , , SD1510/0.594/301A CT600 15,10 0, , , , , , SD1510/0.594/301E CT600 15,10 0, , , , , , SD1520/0.598/301A CT600 15,20 0, , , , , , SD1520/0.598/301E CT600 15,20 0, , , , , , SD1530/0.602/301A CT600 15,30 0, , , , , , SD1530/0.602/301E CT600 15,30 0, , , , , , SD1540/0.606/301A CT600 15,40 0, , , , , , SD1540/0.606/301E CT600 15,40 0, , , , , , SD1550/0.610/301A CT600 15,50 0, , , , , , SD1550/0.610/301E CT600 15,50 0, , , , , , SD1560/0.614/301A CT600 15,60 0, , , , , , SD1560/0.614/301E CT600 15,60 0, , , , , , SD1570/0.618/301A CT600 15,70 0, , , , , , SD1570/0.618/301E CT600 15,70 0, , , , , , SD1580/0.622/301A CT600 15,80 0, , , , , , SD1580/0.622/301E CT600 15,80 0, , , , , , SD1587/0.625/301A CT600 15,87 5/8 16 0, , , , , SD1587/0.625/301E CT600 15,87 5/8 16 0, , , , , SD1590/0.626/301A CT600 15,90 0, , , , , , SD1590/0.626/301E CT600 15,90 0, , , , , , SD1600/0.630/301A CT600 16,00 0, , , , , , SD1600/0.630/301E CT600 16,00 0, , , , , ,890 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 12 Stainless ard aterials

15 140º Series 501 d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0300/0.118/501A CT600 3,00 0, , , , , , SD0300/0.118/501E CT600 3,00 0, , , , , , SD0310/0.122/501A CT600 3,10 0, , , , , , SD0310/0.122/501E CT600 3,10 0, , , , , , SD0317/0.125/501A CT600 3,17 1/8 6 0, , , , , SD0317/0.125/501E CT600 3,17 1/8 6 0, , , , , SD0320/0.126/501A CT600 3,20 0, , , , , , SD0320/0.126/501E CT600 3,20 0, , , , , , SD0330/0.130/501A CT600 3,30 0, , , , , , SD0330/0.130/501E CT600 3,30 0, , , , , , SD0340/0.134/501A CT600 3,40 0, , , , , , SD0340/0.134/501E CT600 3,40 0, , , , , , SD0350/0.138/501A CT600 3,50 0, , , , , , SD0350/0.138/501E CT600 3,50 0, , , , , , SD0357/0.140/501A CT600 3,57 9/ UF 6 0, , , , , SD0357/0.140/501E CT600 3,57 9/ UF 6 0, , , , , SD0360/0.142/501A CT600 3,60 0, , , , , , SD0360/0.142/501E CT600 3,60 0, , , , , , SD0370/0.146/501A CT600 3,70 0, , , , , , SD0370/0.146/501E CT600 3,70 0, , , , , , SD0380/0.150/501A CT600 3,80 0, , , , , , SD0380/0.150/501E CT600 3,80 0, , , , , , SD0390/0.154/501A CT600 3,90 0, UC 6 0, , , , , SD0390/0.154/501E CT600 3,90 0, UC 6 0, , , , , SD0397/0.156/501A CT600 3,97 5/32 6 0, , , , , SD0397/0.156/501E CT600 3,97 5/32 6 0, , , , , SD0400/0.157/501A CT600 4,00 0, , , , , , SD0400/0.157/501E CT600 4,00 0, , , , , , SD0410/0.161/501A CT600 4,10 0, UF 6 0, , , , , SD0410/0.161/501E CT600 4,10 0, UF 6 0, , , , , SD0420/0.165/501A CT600 4,20 0, , , , , , SD0420/0.165/501E CT600 4,20 0, , , , , , SD0430/0.169/501A CT600 4,30 0, , , , , , SD0430/0.169/501E CT600 4,30 0, , , , , , SD0437/0.172/501A CT600 4,37 11/64 6 0, , , , , SD0437/0.172/501E CT600 4,37 11/64 6 0, , , , , SD0440/0.173/501A CT600 4,40 0, , , , , , SD0440/0.173/501E CT600 4,40 0, , , , , , SD0450/0.177/501A CT600 4,50 0, , , , , , SD0450/0.177/501E CT600 4,50 0, , , , , ,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 13

16 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0460/0.181/501A CT600 4,60 0, , , , , , SD0460/0.181/501E CT600 4,60 0, , , , , , SD0470/0.185/501A CT600 4,70 0, , , , , , SD0470/0.185/501E CT600 4,70 0, , , , , , SD0476/0.187/501A CT600 4,76 3/16 6 0, , , , , SD0476/0.187/501E CT600 4,76 3/16 6 0, , , , , SD0480/0.189/501A CT600 4,80 0, UF 6 0, , , , , SD0480/0.189/501E CT600 4,80 0, UF 6 0, , , , , SD0490/0.193/501A CT600 4,90 0, , , , , , SD0490/0.193/501E CT600 4,90 0, , , , , , SD0500/0.197/501A CT600 5,00 0, , , , , , SD0500/0.197/501E CT600 5,00 0, , , , , , SD0510/0.201/501A CT600 5,10 0, , , , , , SD0510/0.201/501E CT600 5,10 0, , , , , , SD0516/0.203/501A CT600 5,16 13/64 6 0, , , , , SD0516/0.203/501E CT600 5,16 13/64 6 0, , , , , SD0520/0.205/501A CT600 5,20 0, , , , , , SD0520/0.205/501E CT600 5,20 0, , , , , , SD0530/0.209/501A CT600 5,30 0,209 1/4-20 UC 6 0, , , , , SD0530/0.209/501E CT600 5,30 0,209 1/4-20 UC 6 0, , , , , SD0540/0.213/501A CT600 5,40 0, , , , , , SD0540/0.213/501E CT600 5,40 0, , , , , , SD0550/0.217/501A CT600 5,50 0, , , , , , SD0550/0.217/501E CT600 5,50 0, , , , , , SD0556/0.219/501A CT600 5,56 7/32 1/4-28 UF 6 0, , , , , SD0556/0.219/501E CT600 5,56 7/32 1/4-28 UF 6 0, , , , , SD0560/0.220/501A CT600 5,60 0, , , , , , SD0560/0.220/501E CT600 5,60 0, , , , , , SD0570/0.224/501A CT600 5,70 0, , , , , , SD0570/0.224/501E CT600 5,70 0, , , , , , SD0580/0.228/501A CT600 5,80 0, , , , , , SD0580/0.228/501E CT600 5,80 0, , , , , , SD0590/0.232/501A CT600 5,90 0, , , , , , SD0590/0.232/501E CT600 5,90 0, , , , , , SD0595/0.234/501A CT600 5,95 15/64 6 0, , , , , SD0595/0.234/501E CT600 5,95 15/64 6 0, , , , , SD0600/0.236/501A CT600 6,00 0, , , , , , SD0600/0.236/501E CT600 6,00 0, , , , , , SD0610/0.240/501A CT600 6,10 0, , , , , , SD0610/0.240/501E CT600 6,10 0, , , , , ,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 14 Stainless ard aterials

17 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0620/0.244/501A CT600 6,20 0, , , , , , SD0620/0.244/501E CT600 6,20 0, , , , , , SD0630/0.248/501A CT600 6,30 0, , , , , , SD0630/0.248/501E CT600 6,30 0, , , , , , SD0635/0.250/501A CT600 6,35 1/4 8 0, , , , , SD0635/0.250/501E CT600 6,35 1/4 8 0, , , , , SD0640/0.252/501A CT600 6,40 0, , , , , , SD0640/0.252/501E CT600 6,40 0, , , , , , SD0650/0.256/501A CT600 6,50 0, , , , , , SD0650/0.256/501E CT600 6,50 0, , , , , , SD0660/0.260/501A CT600 6,60 0, , , , , , SD0660/0.260/501E CT600 6,60 0, , , , , , SD0670/0.264/501A CT600 6,70 0,264 5/18-18UF 8 0, , , , , SD0670/0.264/501E CT600 6,70 0,264 5/18-18UF 8 0, , , , , SD0675/0.266/501A CT600 6,75 17/64 8 0, , , , , SD0675/0.266/501E CT600 6,75 17/64 8 0, , , , , SD0680/0.268/501A CT600 6,80 0, , , , , , SD0680/0.268/501E CT600 6,80 0, , , , , , SD0690/0.272/501A CT600 6,90 0, , , , , , SD0690/0.272/501E CT600 6,90 0, , , , , , SD0700/0.276/501A CT600 7,00 0, , , , , , SD0700/0.276/501E CT600 7,00 0, , , , , , SD0710/0.280/501A CT600 7,10 0,280 F8x1 8 0, , , , , SD0710/0.280/501E CT600 7,10 0,280 F8x1 8 0, , , , , SD0714/0.281/501A CT600 7,14 9/32 8 0, , , , , SD0714/0.281/501E CT600 7,14 9/32 8 0, , , , , SD0720/0.283/501A CT600 7,20 0, , , , , , SD0720/0.283/501E CT600 7,20 0, , , , , , SD0730/0.287/501A CT600 7,30 0, , , , , , SD0730/0.287/501E CT600 7,30 0, , , , , , SD0740/0.291/501A CT600 7,40 0, , , , , , SD0740/0.291/501E CT600 7,40 0, , , , , , SD0750/0.295/501A CT600 7,50 0, , , , , , SD0750/0.295/501E CT600 7,50 0, , , , , , SD0754/0.297/501A CT600 7,54 19/64 8 0, , , , , SD0754/0.297/501E CT600 7,54 19/64 8 0, , , , , SD0760/0.299/501A CT600 7,60 0, , , , , , SD0760/0.299/501E CT600 7,60 0, , , , , , SD0770/0.303/501A CT600 7,70 0, , , , , , SD0770/0.303/501E CT600 7,70 0, , , , , ,417 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 15

18 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0780/0.307/501A CT600 7,80 0, , , , , , SD0780/0.307/501E CT600 7,80 0, , , , , , SD0790/0.311/501A CT600 7,90 0, , , , , , SD0790/0.311/501E CT600 7,90 0, , , , , , SD0794/0.313/501A CT600 7,94 5/16 8 0, , , , , SD0794/0.313/501E CT600 7,94 5/16 8 0, , , , , SD0800/0.315/501A CT600 8,00 0, , , , , , SD0800/0.315/501E CT600 8,00 0, , , , , , SD0810/0.319/501A CT600 8,10 0, , , , , , SD0810/0.319/501E CT600 8,10 0, , , , , , SD0820/0.323/501A CT600 8,20 0,323 3/8-16 UC 10 0, , , , , SD0820/0.323/501E CT600 8,20 0,323 3/8-16 UC 10 0, , , , , SD0830/0.327/501A CT600 8,30 0, , , , , , SD0830/0.327/501E CT600 8,30 0, , , , , , SD0833/0.328/501A CT600 8,33 21/ , , , , , SD0833/0.328/501E CT600 8,33 21/ , , , , , SD0840/0.331/501A CT600 8,40 0, , , , , , SD0840/0.331/501E CT600 8,40 0, , , , , , SD0850/0.335/501A CT600 8,50 0, , , , , , SD0850/0.335/501E CT600 8,50 0, , , , , , SD0860/0.339/501A CT600 8,60 0,339 3/8-24 UF 10 0, , , , , SD0860/0.339/501E CT600 8,60 0,339 3/8-24 UF 10 0, , , , , SD0870/0.343/501A CT600 8,70 0, , , , , , SD0870/0.343/501E CT600 8,70 0, , , , , , SD0873/0.344/501A CT600 8,73 11/ , , , , , SD0873/0.344/501E CT600 8,73 11/ , , , , , SD0880/0.346/501A CT600 8,80 0, , , , , , SD0880/0.346/501E CT600 8,80 0, , , , , , SD0890/0.350/501A CT600 8,90 0,350 F10x1, , , , , , SD0890/0.350/501E CT600 8,90 0,350 F10x1, , , , , , SD0900/0.354/501A CT600 9,00 0, , , , , , SD0900/0.354/501E CT600 9,00 0, , , , , , SD0910/0.358/501A CT600 9,10 0, , , , , , SD0910/0.358/501E CT600 9,10 0, , , , , , SD0913/0.359/501A CT600 9,13 23/ , , , , , SD0913/0.359/501E CT600 9,13 23/ , , , , , SD0920/0.362/501A CT600 9,20 0, , , , , , SD0920/0.362/501E CT600 9,20 0, , , , , , SD0930/0.366/501A CT600 9,30 0, , , , , , SD0930/0.366/501E CT600 9,30 0, , , , , ,575 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 16 Stainless ard aterials

19 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD0940/0.370/501A CT600 9,40 0, , , , , , SD0940/0.370/501E CT600 9,40 0, , , , , , SD0950/0.374/501A CT600 9,50 0, , , , , , SD0950/0.374/501E CT600 9,50 0, , , , , , SD0952/0.375/501A CT600 9,52 3/8 10 0, , , , , SD0952/0.375/501E CT600 9,52 3/8 10 0, , , , , SD0960/0.378/501A CT600 9,60 0, , , , , , SD0960/0.378/501E CT600 9,60 0, , , , , , SD0970/0.382/501A CT600 9,70 0, , , , , , SD0970/0.382/501E CT600 9,70 0, , , , , , SD0980/0.386/501A CT600 9,80 0, , , , , , SD0980/0.386/501E CT600 9,80 0, , , , , , SD0990/0.390/501A CT600 9,90 0, , , , , , SD0990/0.390/501E CT600 9,90 0, , , , , , SD0992/0.391/501A CT600 9,92 25/ , , , , , SD0992/0.391/501E CT600 9,92 25/ , , , , , SD1000/0.394/501A CT600 10,00 0,394 7/16-20 UF 10 0, , , , , SD1000/0.394/501E CT600 10,00 0,394 7/16-20 UF 10 0, , , , , SD1010/0.398/501A CT600 10,10 0, , , , , , SD1010/0.398/501E CT600 10,10 0, , , , , , SD1020/0.402/501A CT600 10,20 0, , , , , , SD1020/0.402/501E CT600 10,20 0, , , , , , SD1030/0.406/501A CT600 10,30 0, , , , , , SD1030/0.406/501E CT600 10,30 0, , , , , , SD1040/0.409/501A CT600 10,40 0, , , , , , SD1040/0.409/501E CT600 10,40 0, , , , , , SD1050/0.413/501A CT600 10,50 0, , , , , , SD1050/0.413/501E CT600 10,50 0, , , , , , SD1060/0.417/501A CT600 10,60 0, , , , , , SD1060/0.417/501E CT600 10,60 0, , , , , , SD1070/0.421/501A CT600 10,70 0,421 F12x1,5 12 0, , , , , SD1070/0.421/501E CT600 10,70 0,421 F12x1,5 12 0, , , , , SD1080/0.425/501A CT600 10,80 0, , , , , , SD1080/0.425/501E CT600 10,80 0, , , , , , SD1090/0.429/501A CT600 10,90 0, , , , , , SD1090/0.429/501E CT600 10,90 0, , , , , , SD1100/0.433/501A CT600 11,00 0,433 1/2-13 UC 12 0, , , , , SD1100/0.433/501E CT600 11,00 0,433 1/2-13 UC 12 0, , , , , SD1110/0.437/501A CT600 11,10 0, , , , , , SD1110/0.437/501E CT600 11,10 0, , , , , ,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 17

20 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD1120/0.441/501A CT600 11,20 0, , , , , , SD1120/0.441/501E CT600 11,20 0, , , , , , SD1130/0.445/501A CT600 11,30 0, , , , , , SD1130/0.445/501E CT600 11,30 0, , , , , , SD1140/0.449/501A CT600 11,40 0, , , , , , SD1140/0.449/501E CT600 11,40 0, , , , , , SD1150/0.453/501A CT600 11,50 0, , , , , , SD1150/0.453/501E CT600 11,50 0, , , , , , SD1160/0.457/501A CT600 11,60 0,457 1/2-20 UF 12 0, , , , , SD1160/0.457/501E CT600 11,60 0,457 1/2-20 UF 12 0, , , , , SD1170/0.461/501A CT600 11,70 0, , , , , , SD1170/0.461/501E CT600 11,70 0, , , , , , SD1180/0.465/501A CT600 11,80 0, , , , , , SD1180/0.465/501E CT600 11,80 0, , , , , , SD1190/0.469/501A CT600 11,90 0, , , , , , SD1190/0.469/501E CT600 11,90 0, , , , , , SD1200/0.472/501A CT600 12,00 0, , , , , , SD1200/0.472/501E CT600 12,00 0, , , , , , SD1210/0.476/501A CT600 12,10 0, , , , , , SD1210/0.476/501E CT600 12,10 0, , , , , , SD1220/0.480/501A CT600 12,20 0, , , , , , SD1220/0.480/501E CT600 12,20 0, , , , , , SD1230/0.484/501A CT600 12,30 0, , , , , , SD1230/0.484/501E CT600 12,30 0, , , , , , SD1240/0.488/501A CT600 12,40 0, , , , , , SD1240/0.488/501E CT600 12,40 0, , , , , , SD1250/0.492/501A CT600 12,50 0, , , , , , SD1250/0.492/501E CT600 12,50 0, , , , , , SD1260/0.496/501A CT600 12,60 0, , , , , , SD1260/0.496/501E CT600 12,60 0, , , , , , SD1270/0.500/501A CT600 12,70 0, , , , , , SD1270/0.500/501E CT600 12,70 0, , , , , , SD1280/0.504/501A CT600 12,80 0, , , , , , SD1280/0.504/501E CT600 12,80 0, , , , , , SD1290/0.508/501A CT600 12,90 0, , , , , , SD1290/0.508/501E CT600 12,90 0, , , , , , SD1300/0.512/501A CT600 13,00 0, , , , , , SD1300/0.512/501E CT600 13,00 0, , , , , , SD1310/0.516/501A CT600 13,10 0, , , , , , SD1310/0.516/501E CT600 13,10 0, , , , , ,772 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 18 Stainless ard aterials

21 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD1320/0.520/501A CT600 13,20 0, , , , , , SD1320/0.520/501E CT600 13,20 0, , , , , , SD1330/0.524/501A CT600 13,30 0, , , , , , SD1330/0.524/501E CT600 13,30 0, , , , , , SD1340/0.528/501A CT600 13,40 0, , , , , , SD1340/0.528/501E CT600 13,40 0, , , , , , SD1350/0.531/501A CT600 13,50 0, , , , , , SD1350/0.531/501E CT600 13,50 0, , , , , , SD1360/0.535/501A CT600 13,60 0, , , , , , SD1360/0.535/501E CT600 13,60 0, , , , , , SD1370/0.539/501A CT600 13,70 0, , , , , , SD1370/0.539/501E CT600 13,70 0, , , , , , SD1380/0.543/501A CT600 13,80 0, , , , , , SD1380/0.543/501E CT600 13,80 0, , , , , , SD1390/0.547/501A CT600 13,90 0, , , , , , SD1390/0.547/501E CT600 13,90 0, , , , , , SD1400/0.551/501A CT600 14,00 0, , , , , , SD1400/0.551/501E CT600 14,00 0, , , , , , SD1410/0.555/501A CT600 14,10 0, , , , , , SD1410/0.555/501E CT600 14,10 0, , , , , , SD1420/0.559/501A CT600 14,20 0, , , , , , SD1420/0.559/501E CT600 14,20 0, , , , , , SD1430/0.563/501A CT600 14,30 0, , , , , , SD1430/0.563/501E CT600 14,30 0, , , , , , SD1440/0.567/501A CT600 14,40 0, , , , , , SD1440/0.567/501E CT600 14,40 0, , , , , , SD1450/0.571/501A CT600 14,50 0, , , , , , SD1450/0.571/501E CT600 14,50 0, , , , , , SD1460/0.575/501A CT600 14,60 0, , , , , , SD1460/0.575/501E CT600 14,60 0, , , , , , SD1470/0.579/501A CT600 14,70 0, , , , , , SD1470/0.579/501E CT600 14,70 0, , , , , , SD1480/0.583/501A CT600 14,80 0, , , , , , SD1480/0.583/501E CT600 14,80 0, , , , , , SD1490/0.587/501A CT600 14,90 0, , , , , , SD1490/0.587/501E CT600 14,90 0, , , , , , SD1500/0.591/501A CT600 15,00 0, , , , , , SD1500/0.591/501E CT600 15,00 0, , , , , , SD1510/0.594/501A CT600 15,10 0, , , , , , SD1510/0.594/501E CT600 15,10 0, , , , , ,890 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 19

22 140º Series 501Continued.. d 1 d 2 l 3 l 4 l 2 l 1 ARDCORE Drill Series 501 ED# Description Grade Drill Drill d Drills for d 2 Diameter Diameter 2 mm l inch 1 l 1 l 2 l 2 l 3 l 3 l 4 l 4 Threads Shank mm inch mm inch mm inch mm inch d 1 mm m 7 d 1 inch m 7 Shank SD1520/0.598/501A CT600 15,20 0, , , , , , SD1520/0.598/501E CT600 15,20 0, , , , , , SD1530/0.602/501A CT600 15,30 0, , , , , , SD1530/0.602/501E CT600 15,30 0, , , , , , SD1540/0.606/501A CT600 15,40 0, , , , , , SD1540/0.606/501E CT600 15,40 0, , , , , , SD1550/0.610/501A CT600 15,50 0, , , , , , SD1550/0.610/501E CT600 15,50 0, , , , , , SD1560/0.614/501A CT600 15,60 0, , , , , , SD1560/0.614/501E CT600 15,60 0, , , , , , SD1570/0.618/501A CT600 15,70 0, , , , , , SD1570/0.618/501E CT600 15,70 0, , , , , , SD1580/0.622/501A CT600 15,80 0, , , , , , SD1580/0.622/501E CT600 15,80 0, , , , , , SD1590/0.626/501A CT600 15,90 0, , , , , , SD1590/0.626/501E CT600 15,90 0, , , , , , SD1600/0.630/501A CT600 16,00 0, , , , , , SD1600/0.630/501E CT600 16,00 0, , , , , ,890 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 20 Stainless ard aterials

23 Technical Information 21

24 Technical Data Recommended Cutting Conditions Speed V c and SF Cutting Speed v c (m/min) min-max/ SF min-max Family R m and V c ISO aterial ardness SF CT600 CT Series 501 Series max min max min Unalloyed Steels <600 /mm 2 V c <180B SF <950 /mm 2 V c <280B SF Alloyed Steels /mm 2 V c B SF /mm 2 V c B SF /mm 2 V c B SF Grey V c GG-Ft SF K Cast Irons ard Steels Chilled Cast Irons Spheroidal-Ductile V c GGG-FGS SF alleable V c GTS - / SF >1400 /mm 2 V c >415 B SF /mm 2 V c B SF aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 22 Stainless ard aterials

25 Technical Data Recommended Cutting Conditions Feed etric and Inch etric ISO Family Rm and aterial ardness f n = mm/min -1 : min. & max Unalloyed Steels Alloyed Steels <600 /mm <180B <950 /mm <280B /mm B /mm B /mm B Grey GG-Ft K Cast Irons ard Steels Chilled Cast Irons Spheroidal-Ductile GGG-FGS alleable GTS - / >1400 /mm >415 B /mm B Inch ISO Family Rm and aterial ardness f n = Inch/rev Unalloyed Steels Alloyed Steels <600 /mm <180B <950 /mm <280B /mm B /mm B /mm B Grey GG-Ft K Cast Irons ard Steels Chilled Cast Irons Spheroidal-Ductile GGG-FGS alleable GTS - / >1400 /mm >415 B /mm B aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 23

26 Drills Set Up Tool holding: Keep the total indicated run-out within 0,02mm ( inch) for drills with whistle notch shank. Drills with cylindrical shanks can be used with high precision collet chucks, hydraulic chucks or shrink fit holders. First choice is hydraulic chucks or shrink fit holders. For best result keep run-out < 0,02mm (0,0008 inch). Stability: The stability of the application is important to achieve the best performance in tool life and hole accuracy. Before starting with the drilling operation check the machine and spindle condition, the fixture of the drill and the clamping of the component to secure maximum stability and rigidity. 0,2 0,3 mm ( inch) Coolant recommendation ole depth < 3 x D min bar ole depth > 3 x D min bar inimum recommended emulsion mix strength = 6% - 8%. For high temperature alloys and stainless steels minimum recommended emulsion mix strength = > 10%. 24

27 Operational guidelines Toolholding Run out tolerance Interrupted cut Requires prior drilling Adjusting Screw Spot face with an end mill prior to drilling. Thrust bearing type collet chuck holds the drill securely Runout 0,02 mm inch One rocess Lower feed when drilling interupted part. Drilling on inclined surfaces Inclined or curved surfaces recommend a lower feed rate than the standard value. Inclination angle of the workpiece surface (and the type of drill) have an influence on the feed reduction. By a max. surface inclination < 4 the feed needs to be reduced by 50%. ore inclined surfaces than > 4 must be pre-machined with a mill. Reduced feed > 6º 100% Feed Drilling on Turning achines When drilling on turning machines the drill must be on centre. The tolerance range of the centre position should not exceed ±0,01 mm ( inch). On bar-turning lathes do not drill into centre pips or test drill holes. Cut-off tools must be mounted precisely. 25

28 ower Requirement Guidelines ardcore: ower consumption for Alloyed Steel 300B 5.00 ower (KW) Diameter (mm) Cutting Speeds: Vc 40 m/min Vc 60 m/min Vc 80 m/min Vc 110 m/min ardcore: ower consumption for Alloyed Steel 300B ower () Cutting Speeds: Vc 131fpm Vc 197fpm Vc 262fpm Vc 360fpm Diameter (inch) aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 26 Stainless ard aterials

29 ower Requirement Guidelines ardcore: ower consumption for Grey Iron 200B ower (KW) Cutting Speeds: Vc 70 m/min Vc 90 m/min Vc 120 m/min Vc 150 m/min Diameter (mm) ardcore: ower consumption for Grey Iron 200B ower () Diameter (inch) Cutting Speeds: Vc 229fpm Vc 295fpm Vc 393fpm Vc 492fpm aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 27

30 Troubleshooting Cutting edge build up Increase the cutting speed Increase the coolant concentration Regrinding Chipping on cutting face rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Reduce the feed Reduce tool life change Regrinding eavy wear on chisel / centre chipping rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Check the concentricity of the drill max.0,02mm ( inch) Reduce the feed during entrance Reduce the feed 28

31 Troubleshooting Continued.. isalignment / poor tolerance rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Check the concentricity of the drill maximum 0,02 mm ( inch) Reduce feed during entrance Reduce feed Increase the coolant concentration and pressure Regrinding Chipping external corners rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Increase the coolant concentration Reduce the cutting speed Reduce the feed during entrance Regrinding eriphery land wear rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Check the concentricity of the drill maximum 0,02 mm ( inch) Increase the coolant concentration Reduce the cutting speed 29

32 Troubleshooting Continued.. Chipping at intersection, web thinning and cutting lip Check the concentricity of the drill maximum 0,02 mm (0.008 inch) roof the machine spindle and tool holder quality Regrinding eavy burr on breakthrough Reduce the feed Reduce tool life change Regrinding 30

33 Troubleshooting Continued.. Excessive flank wear Reduce the cutting speed Increase the feed rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Increase the coolant concentration Ra oor surface quality rove the machine spindle and tool holder quality Check the clamping and the fixture of the component Increase the coolant concentration and pressure Check the concentricity of the drill max.0,02mm (0,0008 inch) 31

34 omenclature and Drilling Formulae Cutting speed (m/min) Vc = n x D x π SF = Vc x 3, R (rev/min) n = Vc x 1000 π x D Feed (mm/rev) f = Vf Feed (inch/rev) = f (mm) n 25,4 Feed speed (mm/min) Vf = f x n aterial removal rate (cm 3 /min) Q = Vf x AT 1000 Cross section area of the hole (mm 2 ) AT = π x D 2 4 x sin k r Torque (m) c = f x kc x D2 x k c x sin k r ower requirement (KW) c = Q 6000 x achining time (min/piece) Tc = L + h Vf Legend: Kc = Specific cutting force (/mm 2 ) L = Drilling depth (mm) h = Safety Distance (mm) = achine efficiency (%) k r = oint Angle 2 32

35 Special Drills l 2 l 3 L l 1 R1 R2 w 1 d 1 d 2 d 3 D Ø Ø Ø Ø w 2 w 3 Choose between radius R 1 - R 2 or angle W 2 - W 3 Customer: Attn.: hone: Fax: aterial to be machined: Int. Cooling Yes o o. of flutes: elix angle: Shank: Coating: Cylindrical: Weldon: Whistlenotch: ø D mm ø d1 mm ø d2 mm ø d3 mm L mm l1 mm l2 mm l3 mm R1 mm R2 mm W1 mm W2 mm W3 mm lease complete form and fax to Customer Services on USA Canada exico

36 aterials Cross Reference Chart Country/Standard aterial Group Rm ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA (/mm 2 ) Designation Ludlum Designation W.-r. DI BS AFOR AIS/SAE Free cutting steel Sb20 10bF2 Free cutting steel Sn S Free cutting steel Snb28 S250b 12L13 Free cutting steel Sn S Free cutting steel Snb36 S300b 12L14 eat treatable steel C22 050A20 CC eat treatable steel Ck Free cutting steel S F Superficial hardening steel Cf35 060A35 XC38TS 1035 eat treatable steel C35 060A35 CC Case hardening steel C CC Case hardening steel Ck XC eat treatable steel C CC eat treatable steel Ck XC Superficial hardening steel Cf53 060A52 XC48TS 1050 Carbon tool steel C105W1 Y1105 W.110 eat treatable steel n eat treatable steel n eat treatable steel n Carbon tool steel C125W Y2120 W.112 eat treatable steel C eat treatable steel Ck XC eat treatable steel C60 080A62 CC eat treatable steel Ck60 080A62 XC Spring steel Ck A igh temp. constructional steel o D3 AST A20Gr.A igh temp. constructional steel Cro Gr.27 15CD3.5 AST A182 igh temp. constructional steel Cro CD9;10 AST A182 igh temp. constructional steel o Tough at sub zero i6 166 AST A350LF5 igh temp. constructional steel oV Tough at sub zero i19 Z Case hardening steel nCr5 (52720) 16C Case hardening steel Cro5 12CD4 Cold work tool steel O1 O1 ot / cold tool steel S7 S7 Tough at sub zero X8i ;510 AST A353 Ball and roller bearing steel Cr6 534A99 100C eat treatable steel Cro4 1717CDS 25CD Case hardening steel iCro CD Case hardening steel Cr C eat treatable steel iCr6 640A35 35C Superficial hardening steel Cr ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 34 Stainless ard aterials

37 aterials Cross Reference Chart Country/Standard aterial Group Rm ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA (/mm 2 ) Designation Ludlum Designation W.-r. DI BS AFOR AIS/SAE eat treatable steel Cr4 530A32 32C Cold work tool steel A6 A6 Superficial hardening steel Cro CD4TS 4140;4142 eat treatable steel Cro4 708A37 35CD4 4137;4135 Cold work tool steel O7 O7 Cold work tool steel WSCrV7 BS1 S1 Cold work tool steel Cr6 BL3 Y100C6 L3 Cold work tool steel A X100CroV51 BA2 Z100CDV5 A2 Cold work tool steel WCr6 105WC13 Cold work tool steel V1 BW2 Y1105V W210 igh speed steel S B2 Z85WDCV igh speed steel S Z100WCWV eat treatable steel X120n12 Z12012 Z12012 Superficial hardening steel CrV4 735A50 50CV igh speed steel Cold work tool steel A7 A7 igh speed steel S BT1 Z80WCV T1 eat treatable steel Crio CD eat treatable steel Cr C eat treatable steel Cro CD Cold work tool steel iCroV6 55CDV7 L6 igh speed steel S Z85WDKCV igh speed steel S BT4 Z80WKCV T4 Case hardening steel iCr10 14C Cold work tool steel D X155CrVo12-1 BD2 Z160CDV12 D2 Cold work tool steel X210Cr12 BD3 Z200Cr12 D3 Cold work tool steel X210CrW12 Cold work tool steel X165CroV12 Case hardening steel iCr C ickelvac eat treatable steel Crio CD itriding steel CrAIo CAD6, 12 Spring steel Si7 250A53 55S Case hardening steel Crio6 820A16 18CD6 eat treatable steel Cro CD12 Spring steel Cr3 527A60 55C Spring steel SiCr7 60SC itriding steel CroV13 9 B12 12 ot work tool steel B11 11 ot work tool steel B10 10 ot work tool steel X40CroV51 B13 Z40CDV5 13 ot work tool steel X30WCrV9 3 B21 Z30WCV9 21 ot work tool steel B19 19 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 35

38 aterials Cross Reference Chart Country/Standard aterial Group Rm ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA (/mm 2 ) Designation Ludlum Designation W.-r. DI AFOR AS Stainless steel ickelvac 410 / 403 AL X6Cr13 403S17 Z6C eat resistant steel casting G-X40iCrSi C11 Stainless steel casting G-X6Cri C15 Z6C18.10 Stainless steel casting G-X6Crio C16 Stainless steel casting G-X7Criob C17 Z4CDb18 12 eat resistant steel AL X10CrAI13 403S17 Z10C ickelvac Stainless steel / 403 AL X10Cr13 410S21 Z10C Stainless steel AL X6Cr17 430S15 Z8C Stainless steel AL X6Cro17 434S17 Z8CD Stainless steel AL 304L X2Cri S12 Z3C L Stainless steel AL X5Cri Stainless steel Allvac 316 L AL 316L X2Crio S12 Z2CD L Stainless steel AL 317L X2Crio S12 Z2CD L Stainless steel X10Criob18 12 Z6CDb17 13B 318 Stainless steel E-Brite Alloy AST A240 Stainless steel AL X10CriS S21 Z10CF Stainless steel AL X5Cri S15 Z6C Stainless steel AL X6CriTi Z6CT Stainless steel X6CrioTi S17 Z6DT Ti eat resistant steel AL X15CriSi S24 Z15CS eat resistant steel AL 310S X12Cri S24 Z12C S Stainless steel AL 904L AST B625 eat resistant steel X12CriTi S320 Z6CT18.12B Stainless steel AL X5Crio S16 Z6CD Stainless steel AL X6Crib S17 Z6Cb eat resistant steel X10CrAI 24 Z10CAS Stainless steel X2Cri S62 Z2C L eat resistant steel X15CriSi eat resistant steel X12iCrSi36 16 Z12CS Stainless steel AL 316LX X2Crio Z2CD L Stainless steel AL X12CrS Stainless steel X12CroS17 Z10CF17 430F Stainless steel X8Crio Stainless steel X45Cr13 420S45 Z40C Z38C13 Stainless steel AL X12Cri17 7 Z12C Stainless steel G-X20Cr14 420C29 Z20C13 Stainless steel AL X20Cr Stainless steel casting X5Cri C11 Z4CD13.4 Stainless steel AL 2205 AST A240 Stainless steel X20Cri S29 Z15Ci Stainless steel A 350 AST A693 recipitation hardening stainless AL ickelvac recipitation hardening stainless 15-5 AL X4CriCub164 Z6CU recipitation hardening stainless AL X7CrioAl157 Z8CDA ickelvac recipitation hardening stainless 17-4 AL X5CriCub174 Z6CU recipitation hardening stainless AL X7CriAl177 Z8CA ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 36 Stainless ard aterials

39 aterials Cross Reference Chart Cr i C n Si S o Cu Ti Others W Al Al Al Al Cb Al Cb Al 1.15 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 37

40 aterials Cross Reference Chart Country/Standard aterial Group B ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Ludlum Designation W.-r. DI BS AFOR AST/SAE Grey cast iron GG 10 Grade 100 Ft 10 D o 20 B Grey cast iron GG 15 Grade 150 Ft 15 D o 25 B Grey cast iron GG 20 Grade 220 Ft 20 D o 30 B Grey cast iron GG 25 Grade 260 Ft 25 D o 35 B Grey cast iron GG 30 Grade 300 R 30 D o 45 B Grey cast iron GG 35 Grade 350 Ft 35 D o 50 B Grey cast iron GG 40 Grade 400 Ft 40 D o 55 B Spheroidal / nodular/ ductile cast iron GGG /22 FGS Spheroidal / nodular/ ductile cast iron GGG / Spheroidal / nodular/ ductile cast iron GGG /7 FGS Spheroidal / nodular/ ductile cast iron GGG /3 FGS Spheroidal / nodular/ ductile cast iron GGG /2 FGS Spheroidal / nodular/ ductile cast iron GGG /2 FGS alleable cast iron 150 GTS B 340/ alleable cast iron GTS / alleable cast iron GTS / alleable cast iron GTS /3 n A alleable cast iron GTS /2 n A Aluminium alloys Al99,9 1B A Aluminium alloys Aln 3 Aluminium alloys AlgSib Aluminium alloys AlCug1 A-U4G 2017 Aluminium alloys AlCug2 L97 A-U4G Aluminium alloys AlCugb Aluminium alloys AlCuBib FC1 A-U5bBi 2011 Aluminium alloys AlSi5 Aluminium alloys AlRgSi Aluminium alloys AlgSi Aluminium alloys AlgSi0, Aluminium alloys AlRg0,5 Aluminium alloys Alg1 41 A-G0, Aluminium alloys Alg1,5 3L44 A-G1, Aluminium alloys AlRg1 Aluminium alloys Alg2,5 2L56 A-G2,5C 5052 Aluminium alloys Alg3 5 A-G Aluminium alloys Alg4n A-G4C 5086 Aluminium alloys ASlg4,5n 8 A-G4,5C 5083 Aluminium alloys Alg Aluminium alloys AlZngCu1,5 DTD5074 A-Z5GU 7075 Aluminium alloys AlZng Aluminium alloys Alg2,5n 51 A-G2,5C 5454 Aluminium alloys AlSi3,5 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 38 Stainless ard aterials

41 aterials Cross Reference Chart Si Fe Cu n g Cr Zn Ti aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 39

42 aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation Iron based alloys C-250 Vascoax C-250 W.-r. DI AFOR AS 6501, 6512, 6520 Iron based alloys C-350 Vascoax C-350 Iron based alloys C-200 Vascoax C-200 Iron based alloys C-300 Vascoax C Iron based alloys T-200 Vascoax T-200 Iron based alloys T-250 Vascoax T , 6519, 6591 Iron based alloys Greek Ascoloy AL Iron based alloys Jethete -152 Z12 CD , 5719 Iron based alloys aynes 556 X12CrCoi Iron based alloys 155 Z12 CKDW Iron based alloys S 590 X40CoCri2020 Z42 CKDW 5533 Iron based alloys A286 ALTE A R 5152 Z06 CT 25 AST 368 Iron based alloys Discaloy 16/25/6 Z3 CT Iron based alloys AL-6X Alloy AL-6X Alloy AST SB688 Iron based alloys Discaloy 24 Z3 CT 25 AST A638 Iron based alloys Armco 18 Iron based alloys Incoloy 801 G-X50Cri Iron based alloys Incoloy 800 ickelvac 800 AL 800 X10iCrAlTi C 3520 ASE SB 409 Iron based alloys Incoloy 802 Iron based alloys 156 Iron based alloys 20CB-3 AL 20 AST B463 Iron based alloys Sanicro 30 X2iCrAlTi3220 Iron based alloys Incoloy 803 Iron based alloys Allvac 330 Allvac , 5716 Iron based alloys Alloy 36 AL 36 AST F1684 Iron based alloys Incoloy DS X12iCrSi Iron based alloys Alloy 42 AL 42 AST F30 Iron based alloys Armco Iron based alloys 4750 AL 4750 AST B753 Iron based alloys Alloy ALLOY AST A666 Iron based alloys 13-8 o Vasco 13-8 o 5629 Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS Cobalt based alloys 35 Allvac 35 Cobalt based alloys L 605 ickelvac L-605 CoCr20W15i KC 20 W 5759 Cobalt based alloys TJA-1537 ickelvac TJA AST F1537 Cobalt based alloys S 816 ALTE S 816 CoCr20i20W 5534 Cobalt based alloys S 21 CoCr28o 3531 AST F-75 Cobalt based alloys S 25 CoCr20W15i KC 20 W AISI 670 Cobalt based alloys S 30 CoCr26i14o Cobalt based alloys S 31 CoCr25iW 3146 KC 25 W AST A567 Cobalt based alloys S 36 CoCr19W14iB Cobalt based alloys Jetalloy 209 Cobalt based alloys L 251 Cobalt based alloys 203 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 40 Stainless ard aterials

43 aterials Cross Reference Chart i Co Cr o W Si n C Al Ti S Others V b + Ta b b Cu Cu Cu Cu b o i Fe Cr o W Si n C Al Ti S Others aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 41

44 aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS Cobalt based alloys 204 Cobalt based alloys 205 Cobalt based alloys AR- 302 CoCrW10TaZrB Cobalt based alloys AR- 322 CoCr22W9TaZrb Cobalt based alloys AR- 509 CoCr24i10WtaZrB Cobalt based alloys AR- 905 Cobalt based alloys AR- 918 CoCr20i20Ta Cobalt based alloys Stellite 1 KC 33 W13 Cobalt based alloys Stellite 6 KC 26 W Cobalt based alloys Stellite 12 KC 28 W8 Cobalt based alloys V-36 CoCr25i200Wb Cobalt based alloys WI-52 CoCr21o11W Cobalt based alloys X 40 CoCr25iW AST A567 Cobalt based alloys X 45 Cobalt based alloys X 50 Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS ickel based alloys Alloy 22 AL 22 ASE SB575 ickel based alloys Allvac Allcorr ickel based alloys Astroloy Allvac Astroloy ickel based alloys Duranickel 310 ickel based alloys GR 235 AISI:686 ickel based alloys GR 235-D icr16oal ickel based alloys astelloy B ickelvac -B S-io30 D27FeV 5396A ickel based alloys astelloy B-2 ickelvac -B-2 ickel based alloys astelloy C icr17o17few C17DWY 5388C ickel based alloys astelloy D ickel based alloys astelloy ickelvac - ickel based alloys astelloy R235 ickel based alloys astelloy W ickelvac -W ickel based alloys astelloy X ickelvac -X ALTE X icr22feo R6,204 C22FeD 5536 ickel based alloys aynes 75 ickel based alloys S 27 ico32cr26o KC20W ickel based alloys I 100 ico15cr10oalti K15CAT 5397 ickel based alloys I 713 ickel based alloys Incoloy ASE SB463 ickel based alloys Incoloy 804 ickel based alloys Incoloy 825 ickelvac 825 AL icr21o C21FeDU ASE SB424 ickel based alloys Incoloy 901 ife35cr14oti Z8CDT ickel based alloys Incoloy 903 ickel based alloys Incoloy 925 ickel based alloys Inconel 600 ickelvac 600 AL icr15fe C15Fe 5540 ickel based alloys Inconel 601 ickelvac 601 AL ickel based alloys Inconel 617 ickelvac ickel based alloys Inconel ickel based alloys Inconel 625 ickelvac 625 ALTE icr22o9b C22FeDB ASE SB443 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 42 Stainless ard aterials

45 aterials Cross Reference Chart i Fe Cr o W Si n C Al Ti S Others Ta Ta 4.5, Zr Ta 3.5, Zr Ta 7.5, Zr Ta 7.5, Zr b b b B Fe Co Cr o W Si n C Al Ti S Others b B B V Cu Cu V b b 0.6 Cu Cu Cu b Cu Cu Cb 3.7 aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 43

46 aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS ickel based alloys Inconel 690 ickelvac ickel based alloys Inconel 700 ico28cr15oalti K27CADT ickel based alloys Inconel ickel based alloys Inconel 706 Allvac ickel based alloys Inconel 713 G-iCr13Al16ob C13AD 5391 ickel based alloys Inconel 718 Allvac 718 ALTE icr19fe19bo R8 C19Feb 5383 ickel based alloys Inconel 718-O Allvac 718-O ickel based alloys Inconel 720 Allvac 720 ickel based alloys Inconel 721 ickel based alloys Inconel 722 ickelvac W-722 icr16feti C16Feti 5541 ickel based alloys Inconel 725 ickel based alloys Inconel 751 ickelvac X ickel based alloys Inconel X-750 ickelvac X-750 ALTE icr16fetti C15FeTb 5542 ickel based alloys Jessop G 81 icr20co18ti ickel based alloys Jethete -252 Allvac -252 G-iCr19Co 5551 ickel based alloys AR- 200 iw13co10cr9alti KW10CATaf ickel based alloys AR- 246 ico10w10cr9alti ickel based alloys AR- 421 icr16co10walti ickel based alloys AR- 432 ico20cr16walti ickel based alloys onel 400 ickelvac 400 AL icu30fe U ickel based alloys onel K 500 ickelvac K icu30al ickel based alloys onel R ickel based alloys imocast 713 G-iCr13A16ob C203 C13AD 5391A ickel based alloys imocast D 16 ife33cr17o ickel based alloys imocast E 10 C202 C2013 ickel based alloys imonic ico20cr15oalti R3 CKD20ATV ickel based alloys imonic ico15cr15oalti R401, 601 CVK15ATD ickel based alloys imonic icr20ti R5, C20T ickel based alloys imonic 80A ickelvac 80 A icr20tial R401, 601 C20TA ickel based alloys imonic 86 ickel based alloys imonic 90 ickelvac icr20co18ti R2,202 CK20TA ickel based alloys imonic 901 ickelvac icr15oti Z8CDT , 5661 ickel based alloys imonic 95 ickel based alloys imonic C-22 ickelvac C-22 ickel based alloys imonic C-263 ickelvac C-263 ALTE icr20cooti R10 CK20D ickel based alloys imonic C-276 ickelvac C-276 AL ASE SB575 ickel based alloys imonic E 13 icr22fe18o R6,204 C22FeD 5536E ickel based alloys imonic E 16 ife33cr17o R207 W11AC ickel based alloys imonic K 25 KCD20ATU 5751A ickel based alloys imonic K 31 ickel based alloys imonic K 33 icr20co16oti 5057 C19KDU/V ickel based alloys R-235 ickel based alloys Refractaloy 26 Z6KCDT38 AISI:690 ickel based alloys René 100 ico15cr10oalti ickel based alloys René 125 ickel based alloys René 41 Rene 41 icr19co11oti C19KDT 5712, 5713 ickel based alloys René 63 ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 44 Stainless ard aterials

47 aterials Cross Reference Chart Fe Co Cr o W Si n C Al Ti S Others Cu Cb Cb Cb Cu b Cb 1.1, Cu Cb B b Ta b b Cu Cu Zr Cu+S Cu+S Ce B V B b V f1.05, Ta B aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 45

48 aterials Cross Reference Chart Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum Designation W.-r. DI AFOR AS ickel based alloys René 77 ickel based alloys René 80 ickel based alloys René 95 C14K8 ickel based alloys TRW VIA ita9co8w6cral ickel based alloys Udimet 500 icr18cooalti CK19DAT AISI:684 ickel based alloys Udimet 520 Allvac 520 ickel based alloys Udimet 630 icr19bo ickel based alloys Udimet 700 ico15cr15oalti CKD20AT AISI:687 ickel based alloys Udimet 710 CK18TDA ickel based alloys Udimet 718 icr19fe19bo R8 C19Feb 5583 ickel based alloys Waspaloy Allvac Waspaloy icr20co14oti C20K Country/Standard aterial Group Commercial ATI Allvac ATI Allegheny GERAY/ITALY U.K. FRACE USA Designation Designation Ludlum W.-r. Designation DI AFOR AS Alpha Titanium alloys Ti-5Al-2.5Sn Allvac TiAl5Sn2 TA 14,17 T-A5E AST: B 265 Alpha Titanium alloys Ti-7Al-4o TiAl7o4 AST: B 381 Alpha Titanium alloys Ti-8Al-1o-1V Allvac TiAl8o1V1 4915, 4933, 4972 Alpha Titanium alloys Ti-6Al-4Zr-2o-2Sn Allvac TiAl6Zr4o2Sn2 4919, 4975, 4976 Alpha Beta Titanium alloys Ti-6Al-4V Allvac 6-4 TiAl6V4 TA , 4920,4928, T-A6V TA , 4967 Alpha Beta Titanium alloys Ti-6Al-6V-2Sn Allvac TiAl6V6Sn Alpha Beta Titanium alloys Ti-4Al-4o-2Sn-0.5Si Allvac TiAl4o4Sn2Si T-A4DE Alpha Beta Titanium alloys Ti-4Al-4o-4Sn-0.5Si TiAl4o4Sn4Si Alpha Beta Titanium alloys Ti-7Al-4o TiAl7o4 AST: B 381 Alpha Beta Titanium alloys Ti-6Al-5Zr-0.5o- 0.25Si TiA6Zr5o0.5Si0.25 T-AGZ-50 Alpha Beta Titanium alloys Ti-6Al-5Zr-4o-Cu- TiAl6Zr5o4Cu 0.2Si Si Alpha Beta Titanium alloys Allvac , 4944 Alpha Beta Titanium alloys 6-4ELI Allvac 6-4ELI 4907, 4930, 4931 Alpha Beta Titanium alloys Allvac Alpha Beta Titanium alloys Ti-17 Allvac Ti Beta Titanium alloys Ti-13V-11Cr-3Al Allvac TiV13Cr11Al Beta Titanium alloys Ti-8o-8V-2Fe-3Al Beta Titanium alloys Ti-3Al-8V-6Cr-4o- 4Zr Allvac Beta Titanium alloys Ti-11.5o-6Zr-4.5Sn ure Titanium Ti 99.5 Allvac 70, Ti C-4 Ti 99.5 TA 6 AIR: 9182 T60 AST: B381F4 ure Titanium Ti 99.6 Allvac 55, Ti C-3 Ti 99.6 AIR: 9182 T50 AST: B381F3 ure Titanium Ti 99.7 Allvac 40, Ti C-2 Ti 99.7a TA 2-5 AIR: 9182 T40 AST: B381F2 ure Titanium Ti 99.8 Allvac 30, Ti C-1 Ti 99.8 TA 1 AIR: 9182 T35 AST: B381F1 Austempered ductile iron E-GJS /80/10 (grade 1) Austempered ductile iron E-JS /550/10 (grade 1) Austempered ductile iron E-GJS /100/7 (grade 2) Austempered ductile iron E-JS /700/7 (grade 2) Austempered ductile iron E-GJS /125/4 (grade 3) Austempered ductile iron E-JS /850/4 (grade 4) Austempered ductile iron E-GJS /185/--- (grade 5) Austempered ductile iron E-JS /1300/-- (grade 5) ATI etal aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys 46 Stainless ard aterials

49 aterials Cross Reference Chart Fe Co Cr o W Si n C Al Ti S Others b b0.5, Ta b b+ta Zr.07 Al Sn o V Zr Si Others Fe Cu Fe Fe Fe Cr Cr Cr Waspaloy is a registered trademark of ratt & Whitney Aircraft. Vasco, Vascoax, Jethete, ickelvac, Rene, Allvac and VascoJet are registered trademarks of ATI roperties, Inc. d.b.a. Allvac. aterial Designations Unalloyed Steels Stainless Steels K Cast Irons S igh Temp. Alloys Stainless ard aterials 47

50 48 otes

51 The ATI Advantage Technology Transfer eans Remarkable Knowledge ATI Stellram is a business unit of ATI etalworking roducts, an operating company of Allegheny Technologies Incorporated, a world-leading producer of titanium and other high temperature heat resistant alloys. The company s tooling engineers and metallurgists pool their talents to achieve smarter solutions for hard to machine materials. The technology transfer between the companies provides an extensive knowledge base of the metals as well as cutting tool performance. I think we re the best-kept secret in the metalworking business. When customers see what we can do, they agree with us, said David ogan, resident of ATI etalworking roducts. The Allegheny Technologies connection provides unique access to both information and technology, and we use this every day to help our customers improve their metal cutting efficiency. That s particularly important for hard to machine materials like stainless, titanium, nickel and cobalt based alloys, ogan said. The trends in industry today are leading to an increase in the use of new alloy materials in products to reduce overall weight, increase strength, reduce corrosion and withstand high temperatures. These new alloy materials are being incorporated into products in aerospace, power generation, oil & gas, medical and automotive industries. We ve developed unique approaches for working these metals many of them exclusive to ATI Stellram. We will continue to work with the other divisions of Allegheny Technologies to provide exceptional solutions for metalcutting applications. ogan said. Our goal is to make the seemingly impossible machining challenges possible through our new product solutions. Our success is based on increasing the profitability of your machining operations. Stainless steels, titanium and titanium alloys, nickel based alloys, silicon electrical steels, armor materials and tool steels. Titanium based alloys, nickel based and cobalt based alloys, specialty alloys. Zirconium, hafnium, niobium, titanium alloys. Gray and ductile iron casting. Carbon and alloy steel forgings. Specialised machining and finishing for titanium mill products. SOLUTIOS FOR DIFFICULT TO ACIE ATERIALS