-L- Pressure bar
|
|
|
- Victoria Eaton
- 6 years ago
- Views:
Transcription
1
2 Sealing ring O -L- Pressure bar Material: Sealing ring O: Polyvinyl chloride Sealing ring O-M3-B: Polyamide Free of copper and PTFE For thread Temperature range Nominal tightening D1 D2 B1 Part No. Type PU 1) torque [ C] M O-M3-B 1 M ±20% O-M O-M Gx ±20% O-1/ O-1/ G¼ 9.05 ±20% O-1/ O-1/ Gy 38.5 ±20% O-3/ O-3/ G½ 47.9 ±20% O-1/ O-1/ G¾ 45 ±20% O-3/4 1 G O Internet: Subject to change 2017/04
3 Sealing ring CRO Sealing ring CRO for use in the chemicals and food processing industries -Q- Temperature range C Material: Polyvinylidenefluoride General technical data Mounting position Any Operating and environmental conditions Operating medium Compressed air in accordance with ISO :2010 [7: : ] Note on operating/pilot medium Lubricated operation possible Ambient temperature [ C] Food-safe 1) See supplementary material information 1) Additional information Certificates. For thread D1 D2 B1 Weight/ Part No. Type PU 1) piece [g] M CRO-M5 1 Gx CRO-1/8 1 G¼ CRO-1/4 1 Gy CRO-3/8 1 G½ CRO-1/2 1 G¾ CRO-3/4 1 G CRO /04 Subject to change Internet: 3
4 Sealing ring OL with metal housing Based on ISO standard Seals at room temperature when tightened by hand Captive Reusable Compatible with the existing O and OK sealing rings -Q- Temperature range C -L- Pressure bar Operating and environmental conditions Operating pressure complete [bar] temperature range Ambient temperature [ C] Corrosion resistance class CRC 1) 2 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Materials Type OL-M5 OL-M6 OL-M10, OL-M12, OL-M14, OL-M16, OL-M22 OL-1/8, OL-1/4 OL-3/8, OL-1/2, OL-3/4 Stop ring High-alloy stainless steel NBR Free of copper and PTFE High-alloy stainless steel Brass High-alloy stainless steel Aluminium Seal Note on materials Free of copper and PTFE Free of copper and PTFE For thread Nominal tightening torque D1 D2 D3 B1 B2 Part No. Type PU 1) M ±20% OL-M OL-M M ±20% OL-M6 1 M ±20% OL-M10 1 M ±20% OL-M12 1 M14 21 ±20% OL-M14 1 M16 30 ±20% OL-M16 1 M22 49 ±20% OL-M22 1 Gx 13.5 ±20% OL-1/ OL-1/ G¼ 21 ±20% OL-1/ OL-1/ Gy 30 ±20% OL-3/ OL-3/ G½ 49 ±20% OL-1/ OL-1/ G¾ 14 ±20% OL-3/4 1 4 Internet: Subject to change 2017/04
5 Sealing ring OK with support ring Based on ISO standard Creates a seal when hand-tightened at room temperature and also when tightened using appropriate tools Captive design Compatible with the existing O and OL sealing rings -Q- Temperature range C -L- Pressure bar Free of copper and PTFE Operating and environmental conditions Operating pressure complete [bar] temperature range Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Ambient temperature [ C] Corrosion resistance class CRC 1) 2 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. For thread Nominal tightening torque D1 D2 B1 Weight Part No. Type PU 1) [g] Stainless steel, nitrile rubber M ±55% OK-M3 1 M ±20% OK-M5 1 M ±20% OK-M7 1 Polyamide, thermoplastic polyurethane Gx 3.5 ±20% OK-1/8 1 G¼ 11 ±10% OK-1/4 1 Gy 12.5 ±20% OK-3/8 1 G½ 14 ±20% OK-1/2 1 G¾ 35 ±10% OK-3/ /04 Subject to change Internet: 5
6 Sealing ring assortment OL-S1 This polymer assortment box contains OL sealing rings ranging in size from M5 to G¾. Ordering data Contents Quantity Nominal tightening torque Part No. Type OL-M ±20% OL-S1 OL-1/ ±20% OL-1/ ±20% OL-3/ ±20% OL-1/ ±20% OL-3/ ±20% Sealing ring assortment OK-S1 This assortment box contains OK sealing rings ranging in size from M3 to G¾. Ordering data Contents Quantity Nominal tightening torque Weight Part No. Type [g] OK-M ±55% OK-S1 OK-M ±20% 0.1 OK-M ±20% 0.1 OK-1/ ±20% 0.12 OK-1/ ±10% 0.32 OK-3/ ±20% 0.44 OK-1/ ±20% 0.6 OK-3/ ±10% 1 6 Internet: Subject to change 2017/04
7 Thread sealing tape GWB-0,1 Ordering data Width Thickness Length Part No. Type [mm] [mm] [m] GWB-0,1 2017/04 Subject to change Internet: 7
-L- Pressure bar
Sealing ring O -L- Pressure 0.95 +10 bar Material: Sealing ring O: Polyvinyl chloride Sealing ring O-M3-B: Polyamide Note on materials: Free of copper and PTFE Dimensions and ordering data For thread Temperature
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
UFR+L FILTER REGULATOR + LUBRICATOR
FEATURES The UFR+L filter regulator + lubricator is intended for the treatment of compressed air or compressed gas. Its function is that of supplying filtered, lubricated air at the desired pressure for
Connexion Developments Ltd + Solenoid Valves (UK) Ltd Unit 3, Rainbow Court, Armstrong Way, Great Western Business Park, Yate, Bristol, BS37 5NG,
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 THERMOPLASTICS & ELASTOMERS ABS Acrylonitrile Butadiene Styrene Class 32222 conforming to ASTM D3965 is a time-proven material. The smooth
Shut-off valves HE-LO
Technical data Function -M- Flow rate 5,200 10,000 l/min -Q- Temperature range 10 +60 C -L- Operating pressure 1 10 bar -H- Note The shut-off valve may not be used as an emergency stop valve. For units
Compact cylinders ADNGF, standard port pattern
Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The
DRUM MOTOR 138LS 138.5Ø 0.10kW kW, with steel helical gearbox
8 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW - 1.00kW, with steel helical gearbox Product description The drum motor 18LS is a very fl exible component thanks to the wide range of powers and speeds. Characteristics
Short Stroke Cylinders ISO Bores from 12 to 100 mm
Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic
DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox
5 DRUM MOTOR UNIT HANDLING Product description The drum motor 16LS is able to provide high torques and withstand high radial loads. Characteristics Salt water resistant aluminum bearing housing Induction
Mounting components. Festo core product range Covers 80% of your automation tasks
Mounting components q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
PTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION
PTFE BELLOWS TECHNICAL SPECIFICATION 1. MATERIALS 1.1 PTFE Only virgin (not reprocessed) PTFE conforming to ASTM D 1457, type III, IV or V shall be used for the production of bellows; the PTFE raw material
Subject: Guidance on Corrosion Assessment of Ex Equipment
1. Introduction Maintaining the integrity of Ex certified electrical equipment is a key barrier against Major Accident Hazards in the oil and gas industry. The integrity must be maintained to ensure that
DRUM MOTOR 220M-H 216.0Ø 0.37kW - 5.5kW, with steel helical gearbox
58 DRUM MOTOR UNIT HANDLING Product description Drum motor very robust able to provide high torques and withstand high radial loads Characteristics Salt water resistant aluminum bearing housing Induction
Features PNEUMATIC ACTUATORS. Stainless steel pneumatic actuators Spring return SR precision casting. Technical features.
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing
www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing Features 1/4 to in. and 6 to 12 tubing sizes available in 316/316L stainless steel and copper Seamless and welded tubing
Independent certification of your products & services. 2.2 Relevant Standards 1. SCOPE
1. SCOPE This schedule specifies requirements for the AquaSpira CSR (Composite Steel Reinforced) pipe system as manufactured by AquaSpira Limited. It is applicable for underground gravity drains, sewer
LIST OF PUBLISHED STANDARDS
Report : 08-0-6 Of 6 Total Count: 8 SABS/TC 004 50-:005/ISO -:000 Rolling - Tolerances Part : Terms 005-0-04 and definitions 0-07-9 50-:005/ISO -:00 5:007/ISO 76:006 Rolling - Tolerances Part : Measuring
SECTION 13. A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications.
SECTION 13 PIPE, TUBE AND PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications. 1.02 QUALITY ASSURANCE
Glycerine filled Bourdon tube pressure gauges EN 837-1
Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys. For measurement in areas with high levels of vibration and high, dynamic pressure
ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES
ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES The new series of ALPHAIR Pneumatic Actuators with special External Adjustment system meets every quality and precision requirement. The new
HS-429 Vibration Trip Manual
HS-429 Vibration Trip Manual CONTENTS 1. SAFETY INSTRUCTIONS ------------------------------------------------------------------------- 2 2. FUNCTIONS AND FEATURES -------------------------------------------------------------------
Standard Bourdon tube pressure gauges EN 837-1
Standard Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys.! When measuring gas or vapour,
With World Class Quality
Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler
ALPHAIR PNEUMATIC ACTUATORS
September 201 ALPHAIR PNEUMATIC ACTUATORS 90 - I Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The
660 Volts 630 & 800AMP
Ergon Energy Corporation Limited Technical Specification for Switch- Disconnectors and Fuse-Switch- Disconnectors 660 Volts 630 & 800AMP ETS-06-02-01 Check this is the latest Process Zone version before
DRUM MOTORS UNIT HANDLING. Moving ahead.
DRUM MOTORS UNIT HANDLING Moving ahead. Rulmeca - Moving ahead. Since its foundation in 1962, the Rulmeca Group, headquartered in Bergamo (Almé), Italy, has grown to become one of the world s leading
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
TOTAL PIPING SOLUTIONS, INC. Quick Cam. Rapid Seal Repair Clamp. Patent Pending Technical Specifications
TOTAL PIPING SOLUTIONS, INC. Quick Cam Rapid Seal Repair Clamp Technical Specifications Rev B July 2017 1. Pressure Rating: Quick Cam Rapid Seal Repair Clamps by when properly installed are capable of
PNEUMATIC RACK & PINION ACTUATORS
PNEUMATIC RACK & PINION ACTUATORS 90-120 - 180 ALPHAIR PNEUMATIC ACTUATORS 90 - STD Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design,
INDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products
Bonded Seals. Description
Description Bonded Seals represent a combination of metal washer and elastomer sealing lip vulcanised to the edge of the metal part to seal bolted connections and mounting elements in all industrial applications
GASKET ASME Standards
GASKET GASKET A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage while under compression. Gaskets allow perfect mating surfaces on machine
ALPHAIR PNEUMATIC ACTUATORS 120 Y SERIES X SERIES
ALPHAIR PNEUMATIC ACTUATORS Y SERIES - 18 X SERIES ALPHAIR AP-Y () AND AP-X (18) SERIES pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The internal
Linear actuators DFPI-ND2P-E-NB3P
-V- New Linear actuators DFPI-ND2P-E-NB3P Key features, product range overview Function DFPI-ND2P E NB3P are standardsbased linear actuators to ISO 15552 with integrated displacement encoder. The potentiometric
ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4
ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...
Introduction. What is CPVC?
Introduction World Plastics is the leading company in the development and manufacture of advanced piping systems since 1984. Our uniquely wide-range of large and small bore piping systems are capable of
Glass & Quartz Components
VACUUM Glass & Quartz Components KF Chain Clamps for Glass Components DN 10 / 16-63... 04 ISO Chain Clamps for Glass Components DN 80-160... 06 KF Elastomer Seals for Glass Components DN 10 / 16-63...
Sight glasses. Feedthroughs ISO-KF. Installation elements
Installation elements Feedthroughs Sight glasses ISO-KF Sight glasses For visually monitoring a process in a vacuum chamber Wide viewing angle Max. pressure: Only 3 bar at 150 ºC Dimensions DN 25 ISO-KF
Tubing/fitting combinations
Tubing/fitting combinations Well combined: tubing/fitting combinations for all cases! Precise selection of the right tubing/fitting combination is above all aligned to the actual location of the application.
Corrosiveness to copper from Petroleum Products ASTM D130 - EN/ISO216 - IP154 - DIN ASTM D IP112 - ASTM D7095
ASTM - EN/ISO216 - IP154 - DIN 51811 - ASTM D4048 - IP112 - ASTM D7095 Item Unit Stainless steel bath Cooling coil Bath drain Easy to operate Position for 6 test cylinders (9 optional) Ordering code TC16
6.1 General. This chapter shall provide requirements for correct use of sprinkler system components and hardware.
NFPA 13-Proposed 2013 Edition Standard for the Installation of Sprinkler Systems TIA Log No.: 1054 Reference: Chapter 6 Comment Closing Date: June 1, 2012 Submitter: Bob Caputo, Fire & Life Safety America
Filter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable with pressure gauge ATEX certified
Filter regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable with gauge ATEX certified 00119372 ATEX Maintenance Unit Parts Regulator type Regulator function Lock type Pressure supply
Body without bypass valve. Body with 6 BAR bypass valve. ELEMENT to be added Element Filtration Size 11 Size 12 Size 13 Size 21 Size 22 FA 5 micron
Pressure (ISO 077-:) Max working: 3,5 MPa (35 bar) Test: 47 MPa (470 bar) Bursting: 95 MPa (9 bar) Collapse, differential for the filter element (ISO 94): series standard: MPa (0 bar) series H+: MPa (0
16CS. Double acting Compressed air to 60 M LED (ON lighting) 980m/s 2
FH1 G B FH F J H2 LB2 N/ S/F Specifications Descriptions Size Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Open
Introduction. What is CPVC?
Introduction World Plastics is the leading company in the development and manufacture of advanced piping systems since 1984. Our uniquely wide-range of large and small bore piping systems are capable of
List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION
List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION EN 295-1 Part 1: Requirements for pipes, fittings and joints Vitrified
RCI 400 Series Actuators
PNEUMATIC RCI 400 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 400 Series offers a lower cost alternative to our highly successful scotch yoke design. The addition of this product broadens
MC -SEALconTACT. Multilam contacts. Multilam Technology
MC -SEALconTACT Multilam contacts Multilam Technology MC -SEAL con TACT MC -SEAL con TACT Patented design New sealed contact for high current connection of uncleaned busbars. KM SN AM-L SN AM-K SN ILL.
COMPILED BY FUNCTIONAL RESP APPROVED BY AUTHORIZED BY TABLE OF CONTENTS FOREWORD... 3 INTRODUCTION SCOPE TYPES... 3
TITLE SPECIFICATION FOR INSULATING PUTTY DATE: JANUARY 2006 PAGE: 1 OF 11 COMPILED BY FUNCTIONAL RESP APPROVED BY AUTHORIZED BY TABLE OF CONTENTS Page FOREWORD... 3 INTRODUCTION... 3 1 SCOPE... 3 2 TYPES...
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG ECCENTRIC PLUG VALVE FLOCENTRIC TM The FLOCENTRIC Eccentric Plug Valve is manufactured using CNC equipment in a world class facility using the finest materials available.
-Q- Temperature range C. -L- Pressure 1 +9 bar. Vacuum gauges Technical data. Vacuum gauge VAM, EN Function
Vacuum gauge VAM, EN 837-1 Function -Q- Temperature range 10 +60 C -L- Pressure 1 +9 bar Analogue display via Bourdon tube Vacuum gauges can be loaded up to ¾ of their full scale value under static load
ABB Drives. Recycling instructions and environmental information ACx drives
ABB Drives Recycling instructions and environmental information ACx580-01 drives List of related manuals Drive hardware manuals and guides Code (English) ACx580-01 drives recycling instructions and environmental
METAL & DUAL SEATED PISTON VALVES
VP Series VESSEL & REACTOR VALVES METAL & DUAL SEATED PISTON VALVES PROCESS VALVES HIGH PERFORMANCE PISTON VALVES Dual Seal Piston Valve Code: VP4D-VP6D High sealing performance of Dual Seal specially
Suction Filter - SE. Working Temperature From -25 to +110 C. Materials. Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide
COMPONENTS Pressure (ISO 077-:00) Max working:, MPa ( bar) Test:,5 MPa (5 bar) Bursting:,5 MPa (5 bar) Collapse, differential for the filter element (ISO 9): 00 kpa ( bar) Bypass Valve Setting: 5 kpa (0,5
Certification Scheme
Certification Scheme WN Glazed vitrified clay pipes, fittings and their accessories for drains and sewers DIN, Part 1-7 (Edition: March 2018) drains and sewers Page 2 of 22 CONTTS Preface...3 Start of
Georg Fischer Waga N.V. The connection for all pipe diameters Restraint - non restraint DN50 - DN600 MULTI/JOINT 3000 Plus
Georg Fischer Waga N.V. The connection for all pipe diameters Restraint - non DN50 - DN600 MULTI/JOINT 3000 Plus MULTI/JOINT 3000 Plus In your daily work you may encounter pipe systems of various materials
BULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
Georg Fischer Waga N.V. The reliable wide range fitting for large pipe diameters DN450 - DN600 MULTI/JOINT XL
Georg Fischer Waga N.V. The reliable wide range fitting for large pipe diameters DN450 - DN600 MULTI/JOINT XL MULTI/JOINT XL The use of large diameter pipes has strongly increased worldwide. More and more
AVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
TECHNICAL PE PIPES & FITTINGS
SPORTSPRO SportsPro 100 has been developed using the very latest raw materials and extruding techniques to offer the sports irrigation market and particularly the golf industry, a pipe with excellent installation
Type 5860 Slurry Seal Designed Specifically for Slurry Pumps and Equipment
Heavy Duty Mechanical Seal for Slurry Processing Industries Type 5860 Slurry Seal Designed Specifically for Slurry Pumps and Equipment Type 5860 Slurry Seal Heavy Duty Mechanical Seals Technology The Type
Return Line Filter RFM
Return Line Filter RFM Flow rates up to 85 l/min Pressure range up to 1 bar Material: Aluminium/Steel/Synthetic material Return line filters type RFM are designed to be mounted on tank tops to filter out
Leak Detectors, Lubricants, and Sealants
www.swagelok.com Leak Detectors, Lubricants, and Sealants Products Snoop liquid leak detectors Goop thread lubricants SWAK, PTFE Tape, and PTFE-Free pipe thread sealants 2 Leak Detectors, Lubricants, and
CAMLOCK FITTINGS TECHNICAL INFORMATION
CAMLOCK FITTINGS TECHNICAL INFORMATION CAMLOCK FITTINGS TECHNICAL INFORMATION Pacific Fittings Camlock couplers are fully interchangeable with Dixon camlock fittings, PT Couplings, Banjo and OPW camlock
SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
IS INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 99742 First edition 1996-04-I 5 Connections for general use and fluid power - Ports and stud ends with IS0 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud
Diaphragm pressure gauge per EN 837-3,
Diaphragm pressure gauge per EN 837-3, chemical design, NS 100/160,Type series BA2 Features Diaphragm pressure gauge Nominal ranges -400 mbar to -1...24 bar, 0 25 mbar to 0 25 bar High quality case with
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
Diaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
Corrosiveness to Copper from Petroleum Products ASTM D130 - EN/ISO IP DIN ASTM D IP ASTM D7095.
ASTM - EN/ISO 2160 - IP 154 - DIN 51811 - ASTM D4048 - IP 112 - ASTM D7095 Item Unit TC16 Ordering code TC16 230V Circulator TC16 115V Circulator 50 or 60Hz 60Hz 31T0671 31T0861 Power [kw] 1.5 Range Reading
Float Flow Meters series NF
Float Flow Meters series NF - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small dimensions Doc. no.: 22, en_cat_nf, 8/2015 Usage Flowmeters type NF are
Diaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
PTFE Thread Sealant Tape Special Service Colors
Expanded PTFE Technology Distributed by: PTFE Thread Sealant Tape Special Service s American-Made Quality & Performance!! Nickel-Filled Grey Tape for Stainless Steel Green Oxygen Tape Yellow Gas Line Tape
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades
Bundesvereinigung Deutscher Stahlrecycling- und Entsorgungsunternehmen e.v. EUROPEAN STEEL SCRAP SPECIFICATION Version: June 1 st 1995 General Conditions applicable to all grades As is pratically achievable
INTRODUCTION TO WELDED METAL
INTRODUCTION TO WELDED METAL BELLOWS SEALS 1 Welded metal bellows mechanical seals have earned their place in today s fluid sealing marketplace because of their reliability and wide range of uses. Bellows
X-FCM Grating Fastening System
X-FCM X-FCM Grating Fastening System Product data Dimensions X-FCM 8.6 [0.339"] o 50 [.969"] o 8 [0.709"] o 0.3 [0.406"] 5 [0.97"] 9.5 [0.768"] L + 4 [0.57"] L. 5 6 [0.630"] [0.049"] 3 X-FCM-M_L General
Innovative, decorative grills & Screens
Innovative, decorative grills & Screens Sales@niduae.com Aluminum Stainless Steel Copper Brass MR Composite panels PVC FOrex Gypsum CNC Cut Laser Cut Waterjet Cut Najib Build Maint T +971-6-7430267 M +971-55-9446222
3. technical data. Page 1 of 10
Page of 0. DESCRIPTION Viking Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed
TAPPING SADDLES DN 40 - DN 450
TAPPING SADDLES 0-0 FAST, PERMANENT TAPPING SOLUTION FOR BOTH RIGID AND FLEXIBLE PIPE TYPES FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated (depending
High Performance Thread Rolling Screw for Metal
High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging
NEW Items. Wire Rope and Accessories. Eye Nuts, Bolts and Turnbuckles. Roller Chain. kent-automotive.com NI1
In the digital version, you can navigate to each section by clicking on the page numbers. You can return to the Table of Contents by clicking in the header. Wire Rope and Accessories Wire Rope Commercial
PMG LISTING CRITERIA FOR PRESS-CONNECTION FITTINGS FOR POTABLE WATER TUBE AND RADIANT HEATING SYSTEMS PREFACE
Title???? Page 1 of 1 www.icc-es.org/pmg (800) 42-6587 (562) 699-054 A Subsidiary of the International Code Council PMG LISTING CRITERIA FOR PRESS-CONNECTION FITTINGS FOR POTABLE WATER TUBE AND RADIANT
Engineering Excellence
Energy Saving Compressed Air Filters NGF SERIES 20 to 1500 scfm (34 to 2459 nm 3 /h) Engineering Excellence SPX is a place where innovation is valued, and the real needs of business are understood. We
Technical Tubing and Hose
Technical Tubing and Hose Flexible Calibrated Tubing Calibrated Multi-Tubing Recoil Tubing and Hose Calibrated Braided Hose Accessories 4-2 4-3 Technical Tubing and Hose Technical Tubing & Hose Technical
HYDRAULICS - INTRODUCTION
HYDRAULIC SEALS HYDRAULICS - INTRODUCTION Sealing elements substantially influence design, function and durability of hydraulic and pneumatic cylinders. This applies both to seals for rods and seals for
799 Z VALVE WITH AP PNEUMATIC ACTUATOR
Pressure (bar) 799 Z VALVE WITH AP PNEUMATIC ACTUATOR FEATURES The 2-way ball-valve 799 Z is designed for the shut-off of HP hydraulic networks up to 1 or 20 bars, according to the diameters. POM floating
Glycerine filled Bourdon tube pressure gauges EN 837-1
Manometer mit Glyzerinfüllung bieten folgende Vorteile: Einsetzbar bei starken Vibrationen und hohen dynamischen Druckbelastungen. Längere Lebensdauer durch geringeren Verschleiß und Korrosionsschutz des
WYATT Orifice flow PrOducTs
WYATT Orifice Differential producers, specifically orifice plates, are used in flow measurement due to their simplicity, ease of installation, tolerance to extreme atmospheric and process conditions, and
Building product declaration BASIC DATA. Document data ULSA. Fläkt Woods Oy. Article No/ID concept. Product group/product group classification
Building product declaration 2015 according to BPD associations standardised format ebvd2015 1. BASIC DATA Document data ULSA Id: C-FI24958758-11 Created: 2018-02-20 07:28:31 Version: 1 Last saved: 2018-02-21
1 Are you spending too much to transport air? The total expense of distributing air from your compressors to its point of use involves more than just the cost of piping. It also includes labor-intensive
Central Station Air Handler Specification
Central Station Air Handler Specification PART 1: GENERAL 1.01 WORK INCLUDED (Model CS 3 ) Mechanical Specification A. Provide complete air handling unit(s) suitable for indoor installation. Contractor
WANG TAPPING SADDLES. fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES DESCRIPTION APPLICATION TECHNICAL DATA
WANG TAPPING SADDLES 0-0 fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated
Corrosiveness to Copper from Petroleum Products ASTM D130 - EN/ISO IP DIN ASTM D IP ASTM D7095.
ASTM - EN/ISO 2160 - IP 154 - DIN 51811 - ASTM D4048 - IP 112 - ASTM D7095 Item Unit TC16 Ordering code TC16 230V Circulator TC16 115V Circulator 50 or 60Hz 60Hz 31T0671 31T0861 Power [kw] 1.5 Range Reading
Materials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
Copyright 2015 AIA MasterSpec Premium 09/15 PRODUCT MASTERSPEC LICENSED BY ARCOM TO CONBRACO, INC.
This Product MasterSpec Section is licensed by ARCOM to Apollo Flow Controls, Conbraco Industries, Inc ("Licensee").This Product MasterSpec Section modifies the original MasterSpec text and does not include
SECTION FIRE HYDRANTS
SECTION 21 11 10 PART 1. GENERAL 1.1 SUMMARY: A. Work consists of furnishing and installing new fire hydrants, (boot with ductile iron retainer gland, standpipe and hydrant complete) plus constructing
0500/12.02 SEAL LOCK. Sealing nuts with reduced installation effort and prevention against loss
0500/12.02 SEAL LOCK Sealing nuts with reduced installation effort and prevention against loss The reliable solution for sealing bolt-nut joints Screwed connections remain in very common use. In many cases,