QUALITY AND EXPERIENCE YOU CAN RELY ON

Transcription

1 QUALITY AND EXPERIENCE YOU CAN RELY ON

2 GRAFILIT SF SL SP EM Expanded natural graphite. Expanded natural graphite, stainless steel foil insert (AISI 316;.5 mm). Expanded natural graphite, tanged stainless steel sheet insert (AISI 316;.1 mm). Expanded natural graphite, expanded stainless steel sheet insert (AISI 316L;.15 mm). Colour Black Black Black Black Size (mm) 1 x 1 (SF, EM) 1 x 1 15 x 15 (SL, SP) Appropriate industries This material has excellent chemical and thermal resistance, combined with high compressibility. Water supply, potable water supply, chemical industry, refrigeration and cooling, high temp. Material designed for high operating pressures with excellent chemical and thermal resistance. Potable water supply, steam supply, chemical industry, power plant, heating systems, high temp. Material designed for high operating and surface pressures. It has excellent chemical and thermal resistance with blowout safety. General purpose, steam supply, gas supply, chemical industry, heating systems, high temp. Material with excellent media resistance and blowout safety, even in applications with cycling loads, makes this material superior. Steam supply, gas supply, chemical industry, heating systems, high temp. Approvals DVGW KTW, DVGW VP 41, BAM (Oxygen), Germanischer Lloyd DVGW KTW, DVGW VP 41, BAM (Oxygen) DVGW KTW, DVGW VP 41, API 67, BAM (Oxygen), Germanischer Lloyd ISO 1497, TA-Luft (VDI 244) TECHNICAL DATA Typical values for a thickness of 1.5 mm Density DIN g/cm Compressibility ASTM F36A % Recovery ASTM F36A % h, 5 MPa, 3 C MPa Specific leak rate DIN mg/(s. m) Leachable chloride content FSA NMG 22 ppm Leachable fluoride content FSA NMG 23 ppm Ash content of graphite DIN 5193 % <1 <1 <1 <1 Compression modulus DIN At room temperature: ε KSW % At elevated temperature: ε WSW/3 C % Percentage creep relaxation DIN At room temperature: ε KRW % At elevated temperature: ε WRW/3 C % Operating conditions Minimum temperature C/ F -2/-328-2/-328-2/-328-2/-328 Continuous temperature - oxidizing atmosphere C/ F 55/122 55/122 55/122 55/122 - reducing or inert atmosphere C/ F 1/1832 7/1292 7/1292 7/1292 Pressure bar/psi 8/116 1/145 2/29 2/29 MICALIT F P Size (mm) 1 x (F) (P) Mica flakes (phlogopite), silicon resin. Mica flakes (phlogopite), silicon resin, tanged stainless steel sheet insert (AISI 316;.1 mm). Colour Yellowish-brown to green Yellowish-brown to green Appropriate industries Material has excellent thermal and chemical resistance. It has good electrical insulation and low thermal conductivity properties. Chemical industry, automotive and engine building industry, heating systems, high temp. Material has excellent thermal resistance, good chemical and mechanical resistance. It has good electrical insulation and low thermal conductivity properties. Chemical industry, automotive and engine building industry, heating systems, high temp. TECHNICAL DATA Typical values for a thickness of 2 mm Density DIN g/cm Compressibility ASTM F36J % 2 2 Recovery ASTM F36J % Loss on ignition DIN % <8 <5 5 MPa, 16 h, 3 C MPa Max. operating temperature C/ F 95/ /1742

3 DONIFLEX G-LD G-MD G-HD G-EM Size (mm) 15 x x 148 (G-LD, G-MD, G-HD) 15 x 148 (G-EM) (G-LD, G-MD) (G-HD) (G-EM) Aramid fibres, natural graphite, inorganic fillers, NBR binder. Aramid fibres, natural graphite, inorganic fillers, NBR binder. Aramid fibres, natural graphite, inorganic fillers, NBR binder. Colour Grey Grey Grey Grey Appropriate industries Approvals Material has very good chemical and thermal resistance. Material s high compressibility enables very good adaptability to uneven flange surfaces. General purpose, chemical industry, paper and cellulose industries, automotive and engine building industry, high temp. WRAS, TA-Luft (VDI 244), DVGW W27 Material has good chemical, thermal, and mechanical properties. It has very good resistance to steam. Petrochemical industry, paper and cellulose industries, automotive and engine building industry, shipbuilding, heating systems, high temp. Material has very good sealability at elevated temperatures under continuous load. Steam supply, gas supply, chemical industry, petrochemical industry, power plant, heating systems. Aramid fibres, natural graphite, inorganic fillers, NBR binder, expanded galvanized steel sheet insert (.4 mm). This material is distinguished by enhanced thermomechanical resistance in particular to surface pressure and blowouts in combination with enhanced sealing characteristics. Steam supply, petrochemical industry, automotive and engine building industry, power plant, heating systems, high temp. Please inquire. Please inquire. Please inquire. TECHNICAL DATA Typical values for a thickness of: 2 mm 1 mm 1.5 mm 2 mm Density DIN g/cm Compressibility ASTM F36J % Recovery ASTM F36J % Tensile strength ASTM F152 MPa MPa, 16 h, 175 C MPa MPa, 16 h, 3 C MPa Specific leak rate DIN mg/(s. m) Thickness increase ASTM F146 Oil IRM 93, 5 h, 15 C % ASTM Fuel B, 5 h, 23 C % Weight increase ASTM F146 Oil IRM 93, 5 h, 15 C % ASTM Fuel B, 5 h, 23 C % Compression modulus DIN At room temperature: ε KSW % At elevated temperature: ε WSW/2 C % Percentage creep relaxation DIN At room temperature: ε KRW % At elevated temperature: ε WRW/2 C % Creep deformation Change in thickness at 2 C, 5 MPa % Change in thickness at 3 C, 5 MPa % Change in thickness at 4 C, 5 MPa % / 1 DONIFLON Size (mm) 15 x 15 9E (9E) (21, 22, 23) PTFE. PTFE, hollow glass microbeads. PTFE, silica. PTFE, barium sulfate. Colour White Blue Fawn White Appropriate industries Expanded PTFE material suitable for nearly all media. Not suitable for molten alkali metals and fluorine compounds. Its excellent compressibility enables very good adaptability to pressure sensitive connections like ceramic-, plastic-, glasslined piping. Steam supply, chemical industry, pharmaceutical industry, food industry, heating systems. Material suitable for nearly all media. Not suitable for molten alkali metals and fluorine compounds. Its high compressibility enables very good adaptability to pressure sensitive connections like ceramic, plastic or glass flanges. Gas supply, chemical industry, petrochemical industry, pharmaceutical industry, food industry, refrigeration and cooling. Material suitable for nearly all media especially recommended for concentrated inorganic acids. Not suitable for molten alkali metals and fluorine compounds. General purpose, potable water supply, chemical industry, pharmaceutical industry, food industry. Material suitable for nearly all media especially recommended for strong alkalis. Not suitable for molten alkali metals and fluorine compounds. Potable water supply, steam supply, gas supply, chemical industry, pharmaceutical industry. Approvals Please inquire. Please inquire. Please inquire. Please inquire. TECHNICAL DATA Typical values for a thickness of 2 mm Density DIN g/cm Compressibility ASTM F36J % Recovery ASTM F36J % Tensile strength ASTM F152 MPa MPa, 16 h, 15 C MPa Specific leak rate DIN mg/(s. m) ph range Operating conditions Minimum temperature C/ F -2/-328-2/-328-2/-328-2/-328 Maximum temperature C/ F 26/5 26/5 26/5 26/5 Pressure bar/psi 1/145 6/87 8/116 8/116

4 BASIC SHEET FEATURES TESNIT BA-22 BA-23 Size (mm) 15 x 15 3 x x 15 (BA-22, BA-23, BA-5, BA-55, BA-U, BA-CF, BA-M, BA-GL) 1 x x 15 (BA-R, BA-REM) 5 x 14 1 x 14 (BA-R3) 5 x 14 (BA-R32) (BA-22, BA-23, BA-5, BA-55, BA-U, BA-CF, BA-M, BA-GL) Cellulose fibres, inorganic fillers, mesh insert on request. Aramid fibres, inorganic fillers, mesh insert on request. Surface finish (BA-R, BA-REM) (BA-R3) (BA-R32) Surface finish is 2AS. (BA-22, BA-23) Colour Pink / Red Yellow Material has good mechanical and sealing properties. It has been designed for non-demanding Material with good thermal resistance, designed for less demanding Surface finish is 4AS. (BA-5, BA-55, BA-U, BA-CF, BA-M, BA-GL, BA-REM) Surface finish is 2G. (BA-R, BA-R3, BA-R32) Appropriate industries General purpose, water supply, shipbuilding. General purpose, water supply, shipbuilding. Optional graphite or PTFE finish on request. Please inquire. Germanischer Lloyd Tolerances ± 5 % on length and width On thickness up to 1. mm ±.1 mm On thickness above 1. mm ± 1 % Approvals TECHNICAL DATA Typical values for a thickness of 2 mm (BA-REM 1.5 mm) Density DIN g/cm Compressibility ASTM F36J % 9 1 Recovery ASTM F36J % 6 6 Tensile strength ASTM F152 MPa MPa, 16 h, 175 C MPa MPa, 16 h, 3 C MPa / / Specific leak rate DIN mg/(s. m).4.8 Thickness increase ASTM F146 Oil IRM 93, 5 h, 15 C % 1 8 ASTM Fuel B, 5 h, 23 C % 1 1 Compression modulus DIN At room temperature: ε KSW % / / At elevated temperature: ε WSW/2 C % / / Percentage creep relaxation DIN At room temperature: ε KRW % / / At elevated temperature: ε WRW/2 C % / / Maximum operating conditions Peak temperature C/ F 18/356 25/482 Continuous temperature C/ F 14/284 2/392 Continuous temperature with steam C/ F 12/248 16/32 Pressure bar/psi 4/58 5/725 P-T DIAGRAM EN , Type IBC, PN 4, DIN / 3.8, 2 mm General suitability - Under common installation practices and chemical compatibility. Conditional suitability - Appropriate measures ensure maximum performance for joint design and gasket installation. Technical consultation is recommended. Limited suitability - Technical consultation is mandatory

5 BA-5 BA-55 BA-U BA-CF BA-M Aramid fibres, inorganic fillers, mesh insert on request. Engineered bio-soluble mineral fibres, aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh insert on request. Aramid fibres, inorganic fillers, mesh or expanded steel insert on request. Carbon fibres, inorganic fillers, mesh or expanded steel insert on request. Engineered bio-soluble mineral fibres, aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expanded steel insert on request. Light green Dark green Blue Black Grey / Green Material has good thermal, chemical, and dynamic resistance. Material has good thermal and chemical properties and resistance to steam. Material for general purpose with good mechanical and thermal properties and low gas permeability. Material has excellent thermal properties and very good chemical resistance to steam and strong alkaline media. Material possesses excellent thermomechanical properties, especially bolt torque retention. General purpose, water supply, potable water supply, gas supply, food industry, automotive and engine building industry. General purpose, potable water supply, steam supply, gas supply, food industry, heating systems. General purpose, gas supply, petrochemical industry, food industry, shipbuilding, refrigeration and cooling. Steam supply, gas supply, chemical industry, paper and cellulose industries, high temp. Steam supply, paper and cellulose industries, power plant, refrigeration and cooling, heating systems, high temp. SVGW DIN , DVGW KTW, DVGW W27, TA-Luft (VDI 244), WRAS, Germanischer Lloyd, EC 1935/24 SVGW DIN , DVGW VP 41, DVGW VP 41 (5 bar), DVGW KTW, DVGW W27, BAM (Oxygen), EC 1935/24, BS 7531 Grade X SVGW DIN , DVGW VP 41, DVGW KTW, DVGW W27, TA-Luft (VDI 244), BAM (Oxygen), WRAS, Germanischer Lloyd, ABS, AGA 814 G (Class III), EC 1935/24 DVGW VP 41, DVGW KTW, BAM (Oxygen), Germanischer Lloyd, BS 7531 Grade X DVGW VP 41, DVGW KTW, BAM (Oxygen), TA-Luft (VDI 244), EC 1935/24, BS 7531 Grade X / /536 35/662 35/662 4/752 44/824 22/428 27/518 25/482 3/572 35/662 18/356 23/446 2/392 28/536 3/572 8/116 1/145 1/145 1/145 12/

6 BA-GL BA-R BA-REM BA-R3 BA-R32 Glass fibres, aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expanded steel insert on request. Aramid fibres, inorganic fillers, NBR binder, carbon steel wire mesh insert. Glass fibres, aramid fibres, inorganic fillers, NBR binder, expanded galvanized steel sheet insert. Engineered bio-soluble mineral fibres, inorganic fillers, NBR binder, tough carbon steel wire mesh insert. Tanged carbon steel sheet sandwiched with BA-R3. Greenish-blue Black Green Black Black This material combines excellent thermal, chemical and mechanical properties. It has outstanding bolt torque retention. This material combines very good resistance to high internal and surface pressure, with good thermal properties. It has high bolt torque retention. This material combines excellent resistance to high internal and surface pressure, with good thermal properties. It has outstanding bolt torque retention. Material has outstanding dynamic and thermal resistance. Material has superior thermal resistance coupled with excellent mechanical properties and blowout safety. Steam supply, gas supply, shipbuilding, power plant, heating systems, high temp. Automotive and engine building industry, shipbuilding. Steam supply, petrochemical industry, shipbuilding, power plant, high temp. Steam supply, automotive and engine building industry, shipbuilding, power plant, high temp. Steam supply, automotive and engine building industry, shipbuilding, power plant, high temp. DVGW VP 41, DVGW KTW, BAM (Oxygen), TA-Luft (VDI 244), API 67, Germanischer Lloyd, WRAS, EC 1935/24, BS 7531 Grade X BAM (Oxygen), Germanischer Lloyd Please inquire. Germanischer Lloyd Germanischer Lloyd / / / / / / / 8 / / /824 4/752 46/86 55/122 65/122 35/662 35/662 37/698 45/842 6/ /482 / 25/482 / / 12/174 14/23 15/2175 / / P-T diagrams indicate the maximum allowed combination of internal pressure and service temperature which can be applied simultaneously for a given gasket depending on its 1 material type, thickness, size and tightness class. Given the variety of gasket applications and service conditions, these values should only be regarded as guidance for the proper 5 gasket assembly. In general, thinner gaskets exhibit better P-T properties

7 Chemical resistance chart for Tesnit products The recommendations made here are intended as a guideline for the selection of a suitable gasket. The function and durability of these products depends upon a number of factors. + Recommended? Recommendation depends on operating conditions - Not recommended Acetamide Acetic acid, 1% Acetic acid, 1% (Glacial)?? Acetone???? Acetonitrile Acetylene (gas) Acid chlorides Acrylic acid?? Acrylonitrile Adipic acid Air (gas) Alcohols Aldehydes???? Alum + + +? Aluminium acetate? + + Aluminium chlorate??? Aluminium chloride?? Aluminium sulfate?? Amines Ammonia (gas)??? Ammonium bicarbonate Ammonium chloride Ammonium hydroxide? Amyl acetate???? Anhydrides?? Aniline Anisole???? Argon (gas) Asphalt Barium chloride Benzaldehyde Benzene Benzoic acid???? Bio-diesel Bio-ethanol Black liquor??? Borax Boric acid Butadiene (gas) Butane (gas) Butyl alcohol (Butanol) Butyric acid? + + Calcium chloride Calcium hydroxide Carbon dioxide (gas) Carbon monoxide (gas) Cellosolve???? Chlorine (gas) Chlorine (in water) Chlorobenzene???? Chloroform Chloroprene???? Chlorosilanes Chromic acid Citric acid??? Copper acetate Copper sulfate Creosote???? Cresols (Cresylic acid) Cyclohexane Cyclohexanol Cyclohexanone???? Decalin Dextrin Dibenzyl ether???? Dibutyl phthalate???? Dimethylacetamide (DMA)???? Dimethylformamide (DMF)???? Dioxane BA-22 BA-23, BA-5, BA-55, BA-U, BA-M, BA-GL BA-CF BA-R, BA-REM, BA-R3, BA-R32 Diphyl (Dowtherm A) Esters???? Ethane (gas) Ethers???? Ethyl acetate???? Ethyl alcohol (Ethanol) Ethyl cellulose???? Ethyl chloride (gas) Ethylene (gas) Ethylene glycol Formaldehyde (Formalin)???? Formamide???? Formic acid, 1%? + + Formic acid, 85%?? Formic acid, 1% Freon-12 (R-12) Freon-134a (R-134a) Freon-22 (R-22)???? Fruit juices Fuel oil Gasoline Gelatin Glycerine (Glycerol) Glycols Helium (gas) Heptane Hydraulic oil (Glycol based) Hydraulic oil (Mineral type) Hydraulic oil (Phosphate ester based)???? Hydrazine Hydrocarbons Hydrochloric acid, 1%?? Hydrochloric acid, 37% Hydrofluoric acid, 1% Hydrofluoric acid, 48% Hydrogen (gas) Iron sulfate Isobutane (gas) Isooctane Isoprene Isopropyl alcohol (Isopropanol) Kerosene Ketones???? Lactic acid??? Lead acetate? + + Lead arsenate Magnesium sulfate Maleic acid??? Malic acid??? Methane (gas) Methyl alcohol (Methanol) Methyl chloride (gas)???? Methylene dichloride???? Methyl ethyl ketone (MEK)???? N-Methyl-pyrrolidone (NMP)???? Milk Mineral oil (ASTM no.1) Motor oil Naphtha Nitric acid, 1% Nitric acid, 65% Nitrobenzene Nitrogen (gas) Nitrous gases (NOx)??? Octane Oils (Essential) Oils (Vegetable) Oleic acid Oleum (Sulfuric acid, fuming) BA-22 BA-23, BA-5, BA-55, BA-U, BA-M, BA-GL BA-CF BA-R, BA-REM, BA-R3, BA-R32 Oxalic acid??? Oxygen (gas) Palmitic acid Paraffin oil Pentane Perchloroethylene Petroleum (Crude oil) Phenol (Carbolic acid) Phosphoric acid, 4%?? Phosphoric acid, 85% Phthalic acid Potassium acetate Potassium bicarbonate Potassium carbonate Potassium chloride Potassium cyanide Potassium dichromate?? Potassium hydroxide??? Potassium iodide Potassium nitrate Potassium permanganate?? Propane (gas) Propylene (gas) Pyridine Salicylic acid??? Seawater/brine Silicones (oil/grease) Soaps Sodium aluminate? Sodium bicarbonate Sodium bisulfite? + + Sodium carbonate Sodium chloride Sodium cyanide Sodium hydroxide??? Sodium hypochlorite (Bleach)?? Sodium silicate (Water glass) + + +? Sodium sulfate Sodium sulfide + + Starch Steam? + +? Stearic acid Styrene???? Sugars Sulfur???? Sulfur dioxide (gas)???? Sulfuric acid, 2% Sulfuric acid, 98% Sulfuryl chloride Tar Tartaric acid??? Tetrahydrofuran (THF) Titanium tetrachloride Toluene ,4-Toluenediisocyanate???? Transformer oil (Mineral type) Trichloroethylene Vinegar Vinyl chloride (gas) Vinylidene chloride Water + + +? White spirits Xylenes Xylenol Zinc sulfate BA-22 BA-23, BA-5, BA-55, BA-U, BA-M, BA-GL BA-CF BA-R, BA-REM, BA-R3, BA-R32

8 Slovenia DONIT TESNIT, D.O.O. Cesta komandanta Staneta 38, 1215 Medvode, Slovenia Phone: +386 () China SUZHOU DONIT SEALING MATERIALS Import and Export Co., Ltd. No. 8 Suzhou Avenue West, Bank of China Building, Room 194, SIP, 21521, P.R. China Phone: +86 () sales.suzhou@donit.eu India DONIT TESNIT INDIA C-46, Mantri Lavendula Mulshi Road, Bavdan Khurd, Pune , India Phone: sales.india@donit.eu Middle East DONIT TESNIT MIDDLE EAST SM - Office- F1-216B Ajman Free Zone Authority, Ajman, United Arab Emirates sales.middleeast@donit.eu North America DONIT TESNIT NORTH AMERICA Donit Tesnit North America, LLC 1549 Stone Ridge Drive Stone Mountain Georgia sales.northamerica@donit.eu Latin America DONIT TESNIT LATIN AMERICA sales.latinamerica@donit.eu Slovenia DONIT TESNIT, D.O.O. Donit Industrial Sealing Solutions Paradiž 4, 821 Trebnje, Slovenia Phone: +386 () salesgaskets@donit.eu Belgium DISS-EUROPE BVBA Donit Industrial Sealing Solutions Toekomstlaan 34, 22 Herentals, Belgium Phone: +32 () sales@disseurope.be Copyright 215 DONIT TESNIT, d.o.o. All rights reserved Date of issue: / PB-GS