Supplying a complete range of metals and plastics to high technology industries
|
|
|
- Sheila French
- 6 years ago
- Views:
Transcription
1 Stock Programme
2 Supplying a complete range of metals and plastics to high technology industries Smiths Advanced Metals is a leading stockholder and supplier of metals and plastics into aerospace, defence, oil & gas and other high technology industries around the world. Our expertise lies in making the highest quality materials available in a fast, cost effective and convenient package. We offer a complete supply solution to all of our customers from small, niche, engineers right through to the biggest multi-national enterprises. Sales team dedicated to aerospace & high tech industries Partnerships with the world s major metal producers Customer cost reduction programmes Comprehensive cutting and processing facilities A full selection of first stage engineering services 40+ aerospace approvals Wide range of international material standards ISO 9001 & AS 9120 at all our service centres A UKAS approved in-house materials testing laboratory Complete supply chain management Bar Cutting Billets Sawing Guillotining Chamfering Milling Turning Honing Circles/Rings Coil Slitting Vinyl Coating Blanking All information in this data sheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases. Our warranties and liabilities are stated exclusively in our terms of trading. Smiths Metal Centres Ltd 2009 (Rev 1)
3 Aerospace Aluminium Bar 2014A L102, L QQ-A-200/3, QQ-A-225/6 AMS 4120, AMS A DTD 5014A, AECMA QQ-A-200/8, QQ-A-225/ L DTD AMS L160, DTD 5124, AMS 4124, AMS 4167, QQ-A-225/9, QQ-A-200/11 s s Squares Aerospace Aluminium 2014A L93, DTD L97, AMS 4035, AMS 4037, QQ-A-250/ A 6061 AMS 4025, AMS 4026, AMS 4027, QQ-A-250/ L DTD 5120B, DTD 5130, AMS 4203, AMS 4204, AMS AMS 4050, AMS L95, AMS 4044, AMS 4045, AMS 4078, QQ-A-250/11, QQ-A-250/ AMS 4089, AMS 4090, AMS 4202 Aerospace Aluminium 1200 L16, L A Bare: L156/7/8/9 Clad: L163/4/5/6/7 QQ-A-250/ Clad: L109, L A 3103 L59, L60, L QQ-A-250/ L80, L QQ-A-250/ L L88, QQ-A-250/12, QQ-A-250/24, QQ-A-250/13 (clad) 7475 Full s Sawn Blocks Machined Blocks Profiled Blocks Rings Circles Bare Clad Polished Guillotining Stamping Profiling Vinyl Coating
4 Aerospace Aluminium 1200 L54,L A L105, L AMS 4088, WW-T-700/ AMS 4065, WW-T-700/ L AMS 4070, AMS 4071 WW-T-700/ L117, L118, AMS 4080, AMS 4083, WW-T-700/ L WW-T-700/7 Square Rectangular Sectional Capillary American Aluminium Alloys QQ-A-200/3 AMS 4165, AMS 4150 QQ-A-200/8 AMS 4173, AMS 4150 QQ-A-200/11 AMS 4169, AMS 4168 QQ-A-225/6 AMS 4120 QQ-A-225/8 AMS 4117 QQ-A-225/9 AMS 4124, AMS 4123 AMS 4122 QQ-A-250/4 AMS 4037 QQ-A-250/5 AMS 4040 QQ-A-250/11 AMS 4025, AMS 4026, AMS 4027 QQ-A-250/12 AMS 4044, AMS 4045 QQ-A-250/13 AMS 4048, AMS 4049 WW-T-700/3 AMS 4088 WW-T-700/6 AMS 4083 Commercial Aluminium Alloys 1050A 1B SigmaChip A A H A H N N N SigmaChip A H
5 Aluminium Tooling ALPLAN 5000 series CERTAL 7000 series CONTAL 7000 series UNIDAL 7000 series KASTAL series KASTAL series ACP 5080R 5000 series ACP 5080P 5000 series Full s Sawn Blocks Profiled Blocks Rings Circles Aluminium Lithium Alloys C Aerospace Stainless Steel Bar S62 420S37, S80 431S29, , AMS 5628 S S37 S S17, AMS 5646 S143 FV 520B S144 S145 Aerospace Steel Bar S82 835M15, EN39B, /3 S95 817M40, EN24 S97 826M31, EN25, S98 826M40, EN26, S99 826M40, EN25, S M24, EN40B, S M39, EN40C, S M31, EN25 S M31, EN25, S M, 300M S M15, /3
6 Duplex & Super Duplex Stainless Steel UNS S32760 ASTM 182 F55, UNS ASTM 182 F51, UNS ASTM 182 F53, Ferrinox 255 UNS 32550, ASTM 182 F61, Aminox 255 UNS S32550 Shapes Precipitation Hardening Stainless Steel A-286 UNS S66286 PH 13-8 AMS 5929, UNS S PH AMS 5659, UNS S PH AMS 5528, UNS S PH AMS 5643, UNS S PH AMS 5528, UNS S17700 S143 FV520B Shapes Aerospace Alloy & Stainless Steel S510 EN3A, S511 EN2A S S514/S515 EN14A S524 S525 S526 S527 s Packs Stainless Steels , UNS S , UNS S , UNS S /304L /6, UNS S30400/3 316/316L /4, UNS S31600/ , UNS S , UNS S , UNS S , UNS S , UNS S , UNS S Mo , UNS S31254 Wire
7 Aerospace Alloy & Stainless Steel T45 T64 T T T CDV UNS G A25, M40, Square Rectangular Oval Aero Bespoke Special Steels 15 CDV /6 16 NCD 13 S157, CDV 13 AMS 6481, CDV 20 AMS 6437, AMS 6485, AMS AMS M 4340 S149, AMS S147, AMS S107, AMS M 4340VAR Wire Maraging Steels C200 UNS K92810 C250 S162, UNS K92890, AMS 6512, C300 UNS K93120, AMS C350 UNS K93160 Shapes For an up-to-date list of alloys plus a selection of over 70 downloadable material data sheets visit:
8 Engineering Steels EN1A 230M07 EN3B 080A15 EN8 080M40 EN16 605M36 EN19 708M40 EN24 817M40 EN32 080M15 EN36 655M13 EN40B 722M24 EN41 905M31 Nickel Alloys Alloy 200/201 UNS N02200/N02201 NA11/ NA12 Alloy 276 UNS Alloy 400 UNS N04400, NA13 Alloy 600 UNS N06600, NA14 Alloy 601 UNS N06601 Alloy 617 UNS N06617 Alloy 625 UNS N06625, NA14 Alloy 718 UNS N07718 Alloy 800 UNS N08800 Alloy 825 UNS N08825, NA16 Alloy K-500 UNS N05500, NA18 Wire
9 Copper & Copper Alloys C101 C103 C106 C109 C110 C111 Ultibron CNS CW004, Cu-ETP CW008, Cu-OF CW024, Cu-DHP CW118C, CuTeP CW009A, Cu-OFE SigmaChip C2, CW114, CuSP CW111C, BSB25, DTD 498 Beryllium Copper Alloy 3/14 UNS C17510, CW110C CuNi2Be Alloy 10 C112, UNS C17500, CW104C, CuCo2Be Alloy 25 UNS 17200, CW101C, CuBe2, AMS 4533, AMS 4534, AMS 4535 Alloy UNS 17300, CW102C CuBe2Pb, AMS 4533 AMS 4534, AMS 4535 Alloy 165 CB101, UNS C17000, CW101C, CuBe1.7 Shapes Brass Alloys CZ106 CZ108 CZ112 CZ114 CZ115 CZ120 CZ121 CZ122 CZ126 CZ130 CZ131 CZ132 CW505 CW508 CW712 CW721 CW722 CW612 CW614 CW617 CW707 CW624 CW606 CW602 Strip Over 40 group customer aerospace approvals including: AIRBUS, BAE SYSTEMS, WESTLAND, GKN, BOMBARDIER ISO 9001 AS 9120
10 Copper Nickel Alloys CN102 NES 779, UNS C70600 CW352H CN107 NES 780, UNS C71500 CW354H NES 835 UNS C72420, DGS 357, DEF STAN Ultibron NB DTD 900/4805, , UNS C72400 Bronze Alloys DTD197A CA104 (B23), CW307G AMS 4640 NES833 DEF STAN UNS C63000 PB1C CC481K LB4C CC494K, UNS C93500 PB102 CW451K, UNS C51000 Engineering Plastics ABS ACRYLIC CARP ECTFE HDPE NYLON 12 NYLON 6 & 66 PET-P CAST NYLON ACETAL PEEK PEI POLYPROPYLENE POLYCARBONATE PTFE PVC Rod Foil Bar A complete range of engineering materials and processing services.
11 Nickel Silver NS101 CW402J, CuNi10Zn42Pb2 NS103 CW401J, CuNi10Zn27 NS104 CW403J, CuNi12Zn24 NS106 CW409J, CuNi18Zn20 All Shapes Magnesium Alloys AZ31 AMS 4375, AMS 4376, AMS 4377, AMS 4382 AZ61 L503, L512, L513 AZ80 AMS 4360, QQ-M-31B & 44B WE43 UNS M18430 WE54 UNS M18410 ZK60 AMS 4352, AMS 4362 QQ-M-40 ZM21 BS 3370, BS3372, BS 3373 ZW3 L505, L514, BS 3372, BS 3373 Titanium & Titanium Alloys Ti-6Al-4V TA10-13 AMS 4911, AMS 4928, AMS 4935, AMS 4904, AMS 4907 Ti-3Al-2.5V AMS 4975, AMS 4976, AMS 4919 Ti AMS 4975, AMS 4976, AMS 4919 Ti AMS 4981B CP Grade 1 TA1, AMS 4940 CP Grade 2 TA 2-5, AMS 4902 CP Grade 3 AMS 4900 CP Grade 4 TA 6-9, AMS 4901 Wire Tungsten 93W-Ni-Fe 95W-Ni-Fe 97W-Ni-Fe 90W-Ni-Fe-Mo 90W-Ni-Cu 95W-Ni-Cu All Shapes
12 Unit 0, Stratton Business Park London Road, Biggleswade Beds SG18 8QB T. +44 (0) F. +44 (0)
Global Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical
Global Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical Our pedigree Maher supplies advanced alloys for high performance applications. Founded in Sheffield
Industrial Rolled Copper and Copper Alloy Products
KME Germany GmbH & Co. KG Copper and Copper Alloy Products [EN] Industrial Rolled Copper and Copper Alloy Products KME Germany GmbH & Co. KG KME and copper Our modern world would be impossible without
ONE-STOP SHOP FOR AEROSPACE MATERIALS
ONE-STOP SHOP FOR AEROSPACE MATERIALS Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.
FORMS : Round Hexagonal, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes.
NON FERROUS METALS: ALUMINIUM: Aluminium, Aluminium Bronze, Manganeese Bronze. FORMS : Round Hexagonal, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes.
Issue February 2018 Valid to December ISO 9001 Registered Quality Management
Issue February 2018 Valid to December 2018 ISO 9001 Registered Quality Management 015 Index February 2018 Page Index Inside front cover Introduction & Abbreviations. 3 Information - Definitions etc. 53
Issue February 2016 Valid to December ISO 9001 Registered Quality Management
Issue February 2016 Valid to December 2016 ISO 9001 Registered Quality Management 015 Index January 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 46
Document Number: TI 5054 Revision: 12 NOT PROTECTIVELY MARKED ULTRA ELECTRONICS PRECISION CONTROL SYSTEMS. Technical Instruction TI 5054.
Document Number: TI 5054 Revision: 12 ULTRA ELECTRONICS PRECISION CONTROL SYSTEMS Technical Instruction TI 5054 for SPECIFICATION Prepared By: Nicholas Roberts Engineer This document is under configuration
I T +31 (0) E TABLE OF CONTENTS DELIVERY PROGRAM NON FERROUS MATERIAL
Below mentioned program overview gives an impression of the possibilities of GNS. Given the enormous diversity in dimensions there is only mention made of available qualities/models. Are you curious about
CORRSTAL YOUR SOURCE TO MATERIALS THAT PROTECT YOU FROM CORROSION CORROSION RESISTANT ALLOY DIVISION.
CORRSTAL CORROSION RESISTANT ALLOY DIVISION YOUR SOURCE TO MATERIALS THAT PROTECT YOU FROM CORROSION YOUR SOURCE TO MATERIALS THAT PROTECT YOU FROM CORROSION CORRSTAL, a division of RJ Technical Resources,
Issue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
Shropshire Stainless and Aluminium. Exceptional service and value for non-ferrous metals and industrial engineering plastics
Shropshire Stainless and Aluminium Exceptional service and value for non-ferrous metals and industrial engineering plastics It s about delivering the best possible service to you. We are an independent,
Grades : SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347,
Unifit MetalloysInc (UMI) is one of the leading Manufacturer, Exporter and Supplier of High Quality Stainless Steel Pipes & Tubes, Flanges, Pipe Fittings, Round Bars, Sheets and Plates Etc.Stainless steel
D101 - JOBBER DRILLS - Silver Bullet
D101 - JOBBER DRILLS - Silver Bullet Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION TS95 ISSUE 8 Issued UNKNOWN Revised 2004-06 Recommendations for Metallic Material Specifications and Standards to be Used for New Designs NOTE: The issue status of this document
Materials. Such a wide range of materials and sources of supply enables us to give our customers a more complete service.
Materials Such a wide range of materials and sources of supply enables us to give our customers a more complete service Tony Heard, Milton Keynes ThyssenKrupp Aerospace the world s aerospace materials
STOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon
TECHNICAL SPECIFICATION. No. TS95
TECHNICAL No. TS95 SAE ITC GUIDANCE FOR SELECTION OF METALLIC MATERIAL S & STANDARDS USED FOR NEW DESIGNS RATIONALE Ninth issue of Technical Spec. Spec format updated to SAE ITC standard, to allow use
ICA Antimicrobial Copper Logo and Cu+ Mark. Conditions of Use
ICA Antimicrobial Copper Logo and Cu+ Mark Conditions of Use Conditions of Use 01April2018 Contents 1. Introduction... 1 2. Defined Standards and Characteristics... 1 3. Commercial... 2 3.1. License Agreement...
Nickel & Nickel Alloys
Nickel & Nickel Alloys Gebauer & Griller Quality Founded in 1946 as a small production unit to draw copper wires our company has grown into a respected supplier for customers in more than 50 countries
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION TS95 AR ISSUE 8 Issued 2014-06 Amendment Record NOTE: The issue status of this document remains unchanged as there have been no changes to the technical content. SAE INDUSTRY TECHNOLOGIES
UNSURPASSED QUALITY AND SERVICE
Penn Stainless Products Premier Processor and Supplier of Stainless Steel Products www.pennstainless.com ISO EXPANSIVE INVENTORY Penn Stainless Products, Inc. supplies quality stainless products and value-added
ALLROUNDER CUTTING TAPS
ALLROUNDER CUTTIN TAPS TECHNIK FÜR EWINDE ALLROUNDER Our multi-purpose cutting taps cover a comprehensive range of materials. They can be applied for the reliable machining of various materials ranging
High performance alloys and components. for Aerospace Industry
High performance alloys and components for Aerospace Industry Copper alloy Materials & Components Processes Semi-continuous and centrifugal casting Extrusion Forging Drawing Heat treatment Machining Non-Destructive
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
+91-8046049589 Poly Metal India http://www.polymetalindia.com/ We are counted amongst the most promising Manufacturer and Trader firm of high quality Metal and Non Metal Products. Our offered products
5 Not Listed. 1 ML22a(ML17g) 1 Not Listed. 1 Not Listed. 1 Not Listed. 2 Not Listed
Type No. Title V Current Rating RRES RRES 90004 Explanation of Drawing Terms and Tolerance Interpretation C EAR99 RRES 90009 Design and Development Activities H Not Listed RRES 90036 Surface Texture Control
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
ASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
Strip for connectors
Strip for connectors REQUIREMENTS TO THE COPPER BASE MATERIAL COPPER AND COPPER ALLOYS FOR A WIDE VARIETY OF CONNECTORS Connection technology for electronic components has to fulfill various tasks using
BS, ASTM, DIN, IS, ANSI, ASME
COMPANY PROFILE Established in the year 1973, we, 'Haresh Steel Centre, Mumbai', have gained specialization in manufacturing, exporting, supplying and trading a wide range of Pipes, Fittings, Flanges,
Rely on our material competence for your demanding industrial processes
Cast materials Rely on our material competence for your demanding industrial processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
Astm And Sae Ams Standards And Specifications For
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with astm and sae ams standards
FERD. WAGNER PROFILE PROFILES FOR THE OPTICAL INDUSTRY
FERD. WAGNER PROFILE PROFILES FOR THE OPTICAL INDUSTRY CONTENT 03 PROFILES Different types of profiles 04 MATERIALS Excerpt from our range of materials 05 BEST OF General information At a glance 06 ADDRESSES
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
Powerode the universal high performance electrode
the universal high performance electrode Powerode : a dedicated and exclusive process Lebronze alloys has always been committed a process of continuous improvement. This allied with a Research & Development
Copper alloys and steel components. for Oil & Gas Industry
Copper alloys and steel components for Oil & Gas Industry Lebronze alloys has been supplying copper alloys semi-finished and finished products for seawater corrosion resistance for more than 50 years.
BÖHLER SPECIAL MATERIALS SHEETS, PLATES AND BLANKS FOR THE AEROSPACE INDUSTRY
BÖHLER SPECIAL MATERIALS SHEETS, PLATES AND BLANKS FOR THE AEROSPACE INDUSTRY 1 QUALITY IS BEARING A NAME BÖHLER BLECHE... specialized in manufacturing single rolled sheets, plates and blanks for the aerospace
BÖHLER SPECIAL MATERIALS SHEETS, PLATES AND BLANKS FOR THE AEROSPACE INDUSTRY
BÖHLER SPECIAL MATERIALS SHEETS, PLATES AND BLANKS FOR THE AEROSPACE INDUSTRY 1 QUALITY IS BEARING A NAME BÖHLER BLECHE... SPECIALIZED IN MANUFACTURING SINGLE ROLLED SHEETS, PLATES AND BLANKS FOR THE AEROSPACE
Aircraft. Automotive. Electronic. Oil and Gas
4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
Steel House India.
+91-8048020444 Steel House India https://www.steelhouseindia.com/ We are actively engrossed in Manufacturing, Trading, Wholesaling, and Retailing a quality assured assortment of steel product. Offered
A comprehensive range for marine applications
A comprehensive range for marine applications e Bronze Industriel started and developed the internal production of copper nickel for seawater corrosion L resistance in collaboration with French Navy shipyards
Unique the 90 shoulder milling system of WNT
New April 2016 New products for cutting tool engineers Unique the 90 shoulder milling system of WNT 90 x 8 cutting edges + Dragonskin = More Power For machining of Steel Stainless steel Cast iron TOTAL
India's Most Trusted Manufacturer, Exporter &
+91-8046079799 Trychem Metal And Alloys http://www.trychemmetal.com/ India's Most Trusted Manufacturer, Exporter & Supplier of Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
SHANKESHWAR METALS. (An ISO 9001 : 2008 Certified Company) Strength in Stainless Steel & Alloys.
SHANKESHWAR METALS () Strength in Stainless Steel & Alloys About Us An ISO 9001 : 2008 Certified company Shankeshwar Metals founded in 1989 is a highly acclaimed Importers, Exporters, Stockiest, & Suppliers
FERD. WAGNER PROFILE PROFILES FOR THE OPTICAL INDUSTRY
FERD. WAGNER PROFILE PROFILES FOR THE OPTICAL INDUSTRY CONTENT 03 PROFILES Different types of profiles 04 MATERIALS Excerpt from our range of materials 05 BEST OF General information At a glance 06 ADDRESSES
CROMONIMET STEEL LIMITED
+91-8048076501 CROMONIMET STEEL LIMITED https://www.indiamart.com/cromonimetsteel/pdf1.html We are a well- known Manufacturer, Exporter, Supplier and Importer of Stainless Steel Round Bar / Pipes and Tubes,
Trychem Metal And Alloys
+91-8046079799 Trychem Metal And Alloys https://www.trychemmetal.com/ India's Most Trusted Manufacturer, Exporter & Supplier ofstainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys
Safety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
TECHNICAL DATA SHEET 30
506 TECHNICAL DATA SHEET 30 Braze Welding Alloy with 6 Nickel Cu-Zn-Ni 900 - - - - 506 is basically an alloy of copper and zinc with 6 Nickel, which enhance the mechanical properties as compared to CUPROX.
VDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
Advanced Metallurgical Products for Critical Applications
Advanced Metallurgical Products for Critical Applications Aerospace Alternative energy sources Automotive and marine components Coatings Electronic components High performance Instrumentation and measurement
TESTS / PROPERTIES. A.1.1 Carbon Steel 1. Density T-WI-CME Si & P ASTM E A.1.2 Stainless Steel 1. Density T-WI-CME
Singapore Test Services Pte Ltd Certificate No. : LA-1987-0002-A Chemical, Microbiological & Environmental Division 249 Jalan Boon Lay Singapore 619523 Issue No. : 24 FIELD OF TESTING : Chemical and Biological
Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.
voestalpine SPECIALTY METALS UK Experts in Oil & Gas, CPI & Energy industries voestalpine High Performance Metals UK
voestalpine SPECIALTY METALS UK Experts in Oil & Gas, CPI & Energy industries voestalpine High Performance Metals UK voestalpine WORLDWIDE voestalpine AG Group is a leading global technology and capital
Material Specification
Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength
RITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
TAM International, Inc.
TAM International, Inc. ES-7.3-05 Specifications for Chemical and Physical Properties of Metals Used in TAM Products Approved by Department Manager Signature/Date: Mark Wyatt 04/08/2015 Reviewed by Sr.
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
The ingenious solution for plunge milling
New June 2017 New products for cutting tool engineers The ingenious solution for plunge milling The new MonsterMill PCR-UNI Drilling Ramping TOTAL TOOLING=QUALITY x SERVICE 2 WNT (UK) Ltd. Sheffield Business
WELDING WIRES. Stainless Steel
BARS WIRES WELDING WIRES Stainless Steel WELDING WIRES Company Profile The Journey of Venus Group Branched out from its domestic trading division, in 1990, Venus started production of stainless steel bars
COMPETENCE CENTERS NOTZ GROUP FACTS & FIGURES NOTZINOX STUDERINOX TRADING DIVISION INDUSTRY DIVISION. About the NOTZ group 3
PRODUCTS AND SERVICES COMPETENCE CENTERS NOTZ GROUP About the NOTZ group 3 TRADING DIVISION NOTZ METALL AG Steel trading 5 INDUSTRY DIVISION NOTZ METALL AG Strip Service Center [NOTZINOX ) 7 LAMINERIES
Stainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Materials Services Materials Australia. Product Catalogue
Materials Services Materials Australia Product Catalogue Content 04 Our Group Mission Statement 05 About us 06 Value-added services 07 Hard to find metals 08 Properties & Applications 09 Aluminium Technical
KNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING
KNIVES giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING ATLAS has comprehensive in-house designing facility to design new products according to customer s specific requirements with complete satisfaction
Precision feeler gage, calibrated shim steel and Specialty Spring Steels
Precision feeler gage, calibrated shim steel and Specialty Spring Steels 2011 Your partner for precision steels We offer an extensive range of precision feeler gages and shim steel which covers most product
SHEETS, PLATES, CIRCLES MADE OF COPPER AND COPPER ALLOYS
SHEETS, PLATES, CIRCLES MADE OF COPPER AND COPPER ALLOYS Cu As we cast the slabs for our plates, sheets and circles in our own foundry, we can ensure highest quality and flexibility. 02 WE MAKE QUALITY
+91-8071803871 Maharashtra Metal (India) http://www.maharashtrametal.co.in/ Maharashtra Metal (India) is a trusted firm engaged in manufacturing and exporting a commendable range of Ferrous and Non Ferrous
Additive Manufacturing Technology November
Additive Manufacturing Technology November 2012 www.3trpd.co.uk Phil Kilburn DMLS Sales Manager Agenda About 3T RPD Ltd Overview of Additive Manufacturing Manufacturing directly in metals Arcam - Electron
Stainless Steel english chinese
January 2014 Stainless Steel english chinese we give shape to steel Marcegaglia is the leading industrial group worldwide in the steel processing sector, with a yearly output of 5 million tons. After
AM metal powders from LPW. Comprehensive range of metal powders optimised for use on all AM machines. 24 hours from order to dispatch
AM metal powders from LPW Comprehensive range of metal powders optimised for use on all AM machines 24 hours from order to dispatch LPW certified to AS9120, AS9100, ISO9001, ISO13485 AM metal powders from
MANUFACTURING EXCELLENCE FROM SHEFFIELD
1 MANUFACTURING EXCELLENCE FROM SHEFFIELD CONTENTS A Passion For Steel Pride In The Past Purpose For The Future Our Products Sawing Forging Ring Rolling Heat Treatment Machining Our Products Express Service
EXPERTS IN OIL & GAS. voestalpine Specialty Metals voestalpine.com/specialtymetals
EXPERTS IN OIL & GAS voestalpine Specialty Metals voestalpine.com/specialtymetals voestalpine WORLDWIDE voestalpine AG Group is a leading global technology and capital goods group with a unique combination
WE LIVE COPPER MKM MANSFELDER KUPFER UND MESSING GMBH
Flat bars MKM supplies flat bars from 20 x 2 mm to a maximum width of 210 mm and thickness of 20 mm, thus covering the entire range in this segment. Besides offering the full assortment of standard dimensions,
Products List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. FAX: MOBILE: MSN :
Products List SHAANXI GETWICK NONFERROUS METALS CO.,LTD. WEB:www.Getwick.cn TEL:+86-917-3637501 FAX:+86-917-3637508 MOBILE: +86-18291726950 MSN : getwick@msn.cn 1. Product name: titanium rod Material:
Sulzer Pumps. Cast Materials. The Heart of Your Process
Sulzer Pumps Cast Materials The Heart of Your Process Sulzer Pumps Striving to Serve You Better Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users.
Properties of Valve Materials
Properties of Valve Materials ASTM NO. OTHER DESIGNATION AL MANGA- CARBON CHROME COBALT COPPER IRON LEAD NESE C Cr Co Cu Fe Pb Mn MOLYB- NESE Mo Commercial Aluminum 380 SC 84 A (Modified) UNS A38000 87.0.0.3
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Stainless Steel Bright Bars (Cold Drawn)
Stainless Steel Bright Bars (Cold Drawn) Applications : Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins,
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
RELIABLE PIPES & TUBES LTD.
RELIABLE PIPES & TUBES LTD. OHSAS 18001:2007 CERTIFIED ISO 9001:2008 CERTIFIED ISO 14001:2004 CERTIFIED PED CERT NO 01 202 IND/Q-11-0033 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel,
Dimensions hot rolled
3 4 5 Dimensions hot rolled Width max. 2,000 mm Length max. 7,000 mm Thickness 2.0 mm up to 90.0 mm Weight max. 3,000 kg Dimensions cold rolled Width max. 1,350 mm Length max. 5,000 mm Thickness 1.0 mm
CUSTOMS TARIFF - SCHEDULE. Chapter 74 COPPER AND ARTICLES THEREOF
74 - i Chapter 74 COPPER AND ARTICLES THEREOF Note. 1. In this Chapter the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85% by weight
Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211
Properties Alloy Steel Music Wire ASTM A228 UNS K08500 & G10860 Cold drawn. Constant tensile strength. Highquality and good for high cycle spring 250 F 449/230 (E) 30 (G).012 to.250 High Carbon Steel Wire/Bar
A recognised ability Industrial Thessco Group in the field of brazing Products Range in Europe Brazing Products alloys THESSCO LIMITED
Brazing Products A recognised ability in the field of brazing alloys The Thessco Group is one of the world s largest manufacturers of Silver Brazing Alloys, Metal Joining products and Industrial Silver
Beryllium Copper Alloys
Beryllium Copper Alloys Security Reliability Performance Beryllium Copper Introduction Offers unique combinations of mechanical and electrical properties ADVANTAGES High strength High fatigue life Good
Mineral Insulated Stainless Steel & Alloy Sheathed Thermocouples & Transducer Cables & Probes
Mineral Insulated Stainless Steel & Alloy ed Thermocouples & Transducer Cables & Probes (Edition August 2017) MICC Ltd Temperature House, 21 Sedling Road Wear Industrial Estate, Washington Tyne and Wear.
EHG aluminium and non-ferrous metals: tonnes in 3,000 dimensions in stock.
EHG aluminium and non-ferrous metals: 2.000 tonnes in 3,000 dimensions in stock. Excerpt from the EHG stock program. Complete EHG stock program: EHG aluminium plate cut lengths Aluminium panel saw up to
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
DONGWOO E&C Tube & Pipe Division
Tube & Pipe Division we are ready to be a new global market leader. Cu-Ni / Brass / Al-Brass / Copper Head Office : #284-17 Jinjang-dong, Buk-gu, Ulsan, Korea (683-350) TEL : +82-52-288-1862 FAX : +82-52-288-1863
Machinability is the ease with which a given material may be worked with a cutting tool
Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in
S. K. International. S. K. International is one of the leading suppliers of special steels and alloys to the Indian market in the last decade.
+91-8071682521 S. K. International https://www.indiamart.com/sk-international-special/ S. K. International is one of the leading suppliers of special steels and alloys to the Indian market in the last
material specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
Cast Irons, Ductile Irons & Malleable Irons
Cast Irons, Ductile Irons & Malleable Irons CAST IRONS mium Sulfur Silicon Nickel Chro- Copper Alloying Elements TransverseTest Load Transverse Test Deflection at Center ksi Mpa Lbs. kn in. mm. HI-STRENGTH
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
TOOLMAKER SOLUTIONS Rotary Tool Blanks
TOOLMAKER SOLUTIONS Rotary Tool Blanks Cemented carbide blanks for drills and end mills TABLE OF CONTENTS HYPERION ROTARY TOOL BLANKS SOLID BLANKS 04 06 END MILL BLANKS WITH CHAMFER, GROUND TO HYPERION
Originally presented at ASM International, Materials Solutions, Columbus, Ohio in October 2004 Richard Bolton MEng, AMIChemE, Area 42 Consulting
A User s Perspective 2014 Geoff B Associates This document is the property of the course instructor, prepared by the course instructor for exclusive use in the delivery of technical training programmes.
+91-8048605094 Sysco Piping Solutions Inc http://www.syscopiping.com/ We are a leading manufacturer and exporter of the best quality Steel and Metal products. Our offered products are made using the best