STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.

Transcription

1 STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics

2 CONTACT Global Sales Phone: Fax: Phone: Fax: Phone: Fax: Phone: Fax: MATERIAS Material FRIATEC-Brand Characterisation Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 Aluminium Oxide Al 2 (+ ZrO 2 ) Aluminium Oxide, fine grain stabilized ZrO 2 Zirkonium Oxide ZrO 2 Zirkonium Oxide DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT DD57 FRIAIT F99,7 FRIAIT FZT FRIAIT FZM DEGUSSIT FZY Pure Al 2, dense, excellent thermal and electrical resistance properties, corrosion resistant, permeable to microwaves Pure Al 2, slightly porous, good resistance to thermal shock, extremely good creep strength Pure Al 2, very porous, good thermal insulation, highest resistance to thermal shock of all the Al 2 materials Pure Al 2, dense, without any binder, red colour, wear resistant and tough, also called sintered ruby Pure Al 2, dense, extremely resistant to wear and corrosion, very high electrical insulating properties A 2 toughened with ZrO 2, dense, high strength, good resistance to thermal shock, extremely resistant to wear and corrosion, fine grain size ZrO 2 partially stabilized with MgO, dense, high strength and highly wear resistant, extremely resistant to corrosion and thermal shock Partially stabilized with Y 2, dense, high purity ZrO 2, high temperature and corrosion resistance, ion conducting for measuring oxygen Available are also parts in different ceramic materials. 02 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

3 TOERANCES IN HIGH-TEMPERATURE TECHNOOGY The dimensional accuracy of the size of the sintered parts essentially depends on the material and the forming method. Tubes, multi-bore tubes and rods ø 3 mm as well as bands: Diameter ± 5 % (but not less than ± 0,1 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height 0.5% of total length Tubes, multi-bore tubes and rods ø < 3 mm: Diameter ± 5 % (but not less than ± 0,05 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height: 0.5% of total length Crucibles, boats, combustion trays: Tolerances ± 3 % (but not less ± 0,1 mm) Plates: Tolerances ± 3 % (but not less ± 0,1 mm); Deflection: maximum 0,5 % of the diagonal Insulating beads and grinding bodies: Tolerances ± 3 % (but not less than ± 0,1 mm) All dimensions in mm TABE OF CONTENTS Electrical Engineering High Temperature Technology Surface Finishing Feedthroughs Tube-To-Tube Insulator Standoffs Tubes 18 Multi-bore tubes 19 Insulating beads 20 Protective tubes/ Multi-bore tubes for thermocouples 21 Rods, Bars, Bands Crucibles 25 Boats, Combustion trays Plates 28 Grinding bodies 28 Insulating powders, Cement Fine grinding tools 37 Burnishing wheels FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 03

4 Available are also parts with different dimensions and in different ceramic materials.

5 HIGH TEMPERATURE TECHNOOGY Rohre, Stäbe, Kapillaren, Tiegel, Platten, Schiffchen, Glühkästen, Mahlkörper HIGH TEMPERATURE TECHNOOGY Tubes, Rods, Multi-Bore Tubes, Bands, Crucibles, Discs, Plates, Boats, Combustion Trays, Grinding Pieces, Insulating powders, Cement

6 TUBES DEGUSSIT A24 Ød ØD Ø D Ø d max. 3 1, * * * * * * Ø D Ø d max. DEGUSSIT A * normative size for thermocouple ARGE-DIAMETER TUBES Ø D Ø d max Ød ØD Order-related manufacture 14 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

7 TUBES - ONE END COSED Ø D Ø d max. 3 1, * * * * * * * * DEGUSSIT A24 Ød ØD Ø D Ø d max. DEGUSSIT A * standard size for thermocouple Available with flange (Surcharge: +10% of Price per Metre) FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 15

8 THIN INSUATING TUBES Ø D Ø d max. 0,5 0, ,6 0, ,8 0, Ød ØD 1 0, , ,1 0, ,2 0, , ,6 0, ,7 1, , , ,5 1, ,7 1, TUBES - THIN WAED Ø D Ø d max Ød ØD FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

9 TUBES FOR OXYGEN SENSORS Ø D Ø d max. DEGUSSIT FZY Order-Related Product Ød ØD TUBES FOR OXYGEN SENSORS - ONE END COSED Ø D Ø d max. DEGUSSIT FZY Order-Related Product Ød ØD RECTANGUAR TUBES B H Wall Thickness max , , Order-Related Product B H TUBES FOR HEATING COIS Ø D Ø d max. Thread breadth Thread depth Thread pitch Ød ØD FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 17

10 MUTI-BORE TUBES - ROUND on request with notch Ø D Ø d Number of bores max. 0,9 0, ,2 0, ,2 0, ,55 0, , , ,35 0, ,5 0, ,8 0, , , * 4 0, * 4 1, , ,5 1, * 6 1, * 8 0, , , * 8,5 1, * * normative size for thermocouple MUTI-BORE TUBES - OVA on request with notch B H Ø d Number of bores max ,9 0, ,4 0, ,5 0, ,2 1, FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

11 INSUATING BEADS Ø D Ø d 3, , , , , Packing unit: 100 pcs. ØD Ød Ø D Ø d Number of bores INSUATING BEADS 4 0, , , , Packing unit: 100 pcs. FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 19

12 PROTECTIVE TUBES FOR STANDARD-ENGTH THERMOCOUPES ONE END COSED DEGUSSIT A24 Ød ØD Ø D Ø d max Ø D Ø d max. DEGUSSIT A MUTI-BORE TUBES FOR STANDARD-ENGTH THERMOCOUPES Ø D Ø d Number of bores max. 4 0, , , , ,5 1, ,5 1, THERMOCOUPES DEGUSSIT A24 Protective tubes and bore tubes ength outer protective tube 1 ength inner protective tube 2 ength bore tube For a standard thermocouple with an outer protective tube 180 you need an inner protective tube 200 and bore tube FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

13 RODS Ø D max. 0, , , , , Ø D max. ØD BARS FRIAIT F99, Tolerances Diameter: +1 / +4 mm ength: +/- 5 mm Deflection: max. 0,5 % of the total lenght Order-Related Product B H max. ØD BANDS Order-Related Product B H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 21

14 CRUCIBES - CYINDRICA, FAT BASE DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY ØD1 ØD2 Ø D1 Ø D2 H Approx. Vol. ml , H Ø D1 Ø D2 H Approx. Vol. ml DEGUSSIT A Ø D1 Ø D2 H Approx. Vol. ml DEGUSSIT A , , Ø D1 Ø D2 H Approx. Vol. ml DEGUSSIT FZY Order-Related Product 22 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

15 CRUCIBES CONICA HIGH FORM Ø D1 Ø D2 Ø D3 H Approx. Vol. ml ØD1 ØD2 DEGUSSIT FZY Ø D1 Ø D2 Ø D3 H Approx. Vol. ml DEGUSSIT FZY Order-Related Product ØD3 H CRUCIBES CONICA WIDE FORM Ø D1 Ø D2 Ø D3 H Approx. Vol. ml ØD1 ØD2 H ØD3 CRUCIBES - CYINDRICA, ROUND BASE Ø D1 Ø D2 H Approx. Vol. ml Tammann No I a I b I c II a II b II c III a III b III c ,070 IV a ØD1 ØD2 Tammann H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 23

16 SIP-ON CRUCIBES Approx. Vol. ml Order-Related Product Ø5 Ø4 0, Ø2 Ø4 SIP-ON CRUCIBES Approx. Vol. ml Order-Related Product Ø 17 Ø 16 R 8 R Ø 2,5 Ø 3,6 SIP-ON CRUCIBES Approx. Vol. ml Order-Related Product Ø8 Ø6 ( 15 ) 0,6 6 8,4 8 6 Ø2,55 Ø4,3 24 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

17 BOATS B H W Approx. Vol. ml , , , B W H COMBUSTION TRAYS B H W Approx. Vol. ml B H W Approx. Vol. ml DEGUSSIT A B DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY H B H W Approx. Vol. ml DEGUSSIT A * W B H W Approx. Vol. ml DEGUSSIT FZY Order-Related Product * W conical FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 25

18 PATES - ROUND DEGUSSIT A25 Ø D H PATES ROUND WITH HOE Ø D H DEGUSSIT A Plates sizes of plates up to approx. Ø 350 x 20 upon request Ø D1 Ø D2 H Plates sizes of plates up to approx. Ø 350 x 20 upon request 26 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

19 PATES - RECTANGUAR B H DEGUSSIT A25 FRIAIT F99,7 FRIAIT FZM H B H DEGUSSIT A B B H FRIAIT F99, B H FRIAIT FZM Plates sizes of plates up to approx. 700 x 350 x 20 upon request FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 27

20 GRINDING BODIES Ø D H pcs./l pcs./kg kg/l , , , , , INSUATING POWDER - CACINED Aluminium oxide Al 2 >99,5 % Type Crystal size VM 99% < 10 µm Primarily for electrical insulation of cathode heaters and as fillers of casting resins. INSUATING POWDER - FUSED Aluminium oxide Al 2 >99,7% Type Crystal size E No. 100 ~ 150 µm E No. 250 ~ 40 µm Primarily in dry filling for thermal insulation of electrical furnaces. CEMENT Aluminium oxide A 2 >95% Type Crystal size A2O3 ~ 150 µm For sealing thermocouples in furnace linings, embedding heating coils or platinum crucibles, etc. The cement is diluted with water to the required consistency. Since it is not cold-hardening, it contains 0.5% organic binder in order to increase its dry strength. This binder is burned off completely during the heating process. Above 1200 C progressive hardening of the cement begins, as a result of sintering. 28 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

21 Ø D PRECISION BAS FRIAIT F99,7 Quality: Grade 25, polished surface Sphericity: 0,6 µm Diameter Tolerance: 2,5 µm 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 29

22 COMPETENCE PUS RESPONSIBIITY Our customers rightly expect first-class performance with lasting value. Besides the competence to achieve this, we also undertake the responsibility for it. Ask for the evidence: FRIATEC is the technological and market leader in ceramic materials for the 21st Century Image-intensifier for radiology 02 X-Ray tube for radiology 03 Pressure sensor for aerospace 04 Camera housing for aerospace 05 Accelerator tube for radiologye 06 Feedthroughs for high-vacuum applications 07 High-voltage feedthroughs for vacuum technology 08 Insulating tubes for high-vacuum technology 09 High current feedthroughs for energy systems 10 Wafer carrier for the semiconductor industry 11 Test plates for the semiconductor industry 12 Sensor elements for the semiconductor industry 13 Guide strip for the printing industry 14 Isolator for the printing industry 15 Square tubes for the printing industry 16 Tubes, rods and capillaries for high temperature applications 17 Thermal protection tubes for the glass and metallurgical industries 18 Crucibles and boats for industry and research 19 FZY-probes for oxygen measurement in gases 20 Dielectric elements for fuel cells 21 Dielectric elements for fuel cells 22 Thermal protection tubes for high temperature applications 23 Shaping roller for the glass industry 24 Glow-block for heat treatment of lamp filaments 38 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

23 Electrical Engineering High Temperature Technology Mechanical Engineering Surface Finishing Ozone generator for the semiconductor industry 26 Control discs for production and laboratory processes 27 Dosing pistons with control edge for the food-processing and pharmaceutical industries 28 Pump inserts for medical technology 29 Float body for flow-measurement in the chemical industry 30 Electrode holder for flow-measurement in the chemical industry 31 Flow meters for the food-processing industry 32 Welding pins for automotive-body manufacture 33 Centring pin for automotive-body manufacture 34 Metal-forming tools for automotive-body manufacture 35 Isolation shells for magnetically-coupled pump in the chemical industry 36 Pump impeller for the chemical industry 37 Stirrers for the chemical industry 38 High-pressure pump piston for the chemical industry 39 Adhesive nozzle for the paper industry 40 Valve disc for pulp-processing 41 Vacuum plate for paper-making 42 Protection tubes for the glass industry 43 Midget file for the glass-processing industry 44 Hand lappers for the glass-processing industry 45 Grinding wheel for the glass-processing industry 46 Grinding tools for metal working 47 Bench-stones for metal working 48 Mounted points for metal working FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 39

24 FRIATEC Aktiengesellschaft - Ceramics Division Steinzeugstrasse Mannheim (Germany) Tel info-frialit@friatec.de e 0,3.III15.tp