WINDPOWER. coatings for wind energy. quality and experience since 1906

Transcription

1 WINDPOWER coatings for wind energy

2 PETER-LACKE history 1906 Foundation by Ernst Peter und his son Wilhelm 1920 Production of furniture paints in Herford, Germany 1960 Relocation to Hiddenhausen, Germany 1978 Andreas Peter becomes Managing Director 1980 Paint systems for automotive and consumer electronics 1990 Introduction of UV systems, start production of glass paints 1994 Start in China 1998 Representative office in China Foundation of PETER-LACKE Poland 2003 Foundation of PETER-LACKE China 2005 Foundation of PETER-LACKE Russia years of PETER-LACKE PETER-LACKE Service Centre Russia in Samara 2007 Foundation of PETER-LACKE India Foundation of PETER-LACKE Mexico 2009 Opening of new paint factory in Shanghai Foundation of PETER-LACKE Turkey Innovative by tradition... PETER-LACKE has been convincing for over 100 years due to innovative paint systems and dynamic growth. Thanks to its own subsidiaries in the most important industrial centres worldwide we respond swiftly to our customers wishes and react quickly to changing markets. Our customer-oriented corporate philosophy based on partnership serves all interests. From design to marketability. for over 100 years 2

3 PETER-LACKE everywhere China India Germany Turkey Mexico Global by conviction... The global structure of the PETER-LACKE Group and the development laboratories in Germany and China ensure modern technology at international level and economic advantages due to the use of local raw material markets. From product develop ment to series production. International competence at the point of sale 3

4 Partner to industry for innovative solutions PETER-LACKE everything Automotive exterior Automotive interior 3 C CE / DAP Glass Everything under one roof... Our sales programme offers modern and economical coating systems for the automobile industry, for household appliances and consumer electronics, for the glass industry and for wind power applications. Our product range comprises 1-component, 2-component and UV paints, economical single-coat paints, filling primers, brilliant basecoats and high-quality topcoats. Solvent-based, solvent-free and also waterdilutable. customer-friendly and environmentally sound 4

5 Application Technology Page 6-7 Classic system Page 8 Advanced system Page 9 High-end system Page 10 WINDPOWER contents PETER-LACKE coating systems are suitable for all manufacturing methods used for rotor blades. No matter whether wet lamination, prepreg lamination or infusion methods, all systems are adapted individually to the processes and production conditions in cooperation with the users. Classic: Easy application and low investment costs. The standard coating system with class. Advanced: High-quality wear protection with short cycle times. Free of solvents. High-end: Optimum protection with perfect smoothness for particularly economical use. 5

6 How to do it... Sanding Thorough sanding is required to remove the release agent and to roughen the surface. This ensures optimum adhesion of the coating to the substrate. Flat coat Contouring the blade surface. Our PEHAPOL 2-C PUR Paste filling compounds are characterised by their very good workability, fast drying and excellent sandability. Also recommended as repair material. Basecoat Our UV stable, low-solvent, fast drying PEHAPOL 2-C Basecoat provides an extra long-lasting protective coating thanks to its very high abrasion resistance and can be applied in high film thicknesses by roller and spray equipment. PEHAPOL 2-C Basecoat is also recommended as repair material for rotor blades on site. 6

7 ...Application in detail Leading edge Our liquid 2-component PEHAPOL 2-C Edge protector especially developed for protecting the leading edge of rotor blades is characterised by its very good UV stability, excellent flexibility and further improved abrasion resistance. PEHAPOL 2-C Edge protector is also recommended as repair material for rotor blades on site. Pores and pinholes Filling of even the smallest pores and pinholes with PEHAPOL 2-C Porefiller pro vides for very smooth surfaces after applying the topcoat. PEHAPOL 2-C Porefiller is particularly user friendly in the production process thanks to its low material consumption and fast drying. Topcoat Our VOC-compliant, 2-C Topcoats PEHACRYL (solvent-based) and PEHABIN (water-based) are particularly UV stable and flexible and minimise energy losses thanks to their very high surface quality. These topcoats can be applied by both roller and spray equipment. PEHACRYL and PEHABIN topcoats are also recom mended as repair materials for rotor blades on site. 7

8 CLASSIC Easy application and very low investment costs at the same time. The minimum requirements for protective coatings are fulfilled. 1. Apply release agent to the mould 2. Insert EP laminates 3. Assembling of blade and removing release agent 4. Repair defects and contouring of the blade surface with PEHAPOL 2-C Paste 5. Protect the leading edge by applying PEHAPOL 2-C Edgeprotector (3 x μm) OPTIONAL: Fill pores with PEHAPOL 2-C Porefiller 6. Apply PEHACRYL 2-C Plastic Paint (2 x μm) or PEHABIN 2-C Hydro Paint (2 x 50 μm) as topcoat Dry film thickness on surface: Dry film thickness on leading edge: μm μm Properties: - Short process times and therefore few operations - Easy to integrate into production process - Inexpensive system: low investment costs and material consumption 8

9 ADVANCED Short cycle times due to subsequent application of highly resistant, solvent-free protective coating. This system effortlessly fulfils the requirements of high-quality wear resistance and can be easily integrated into the production process thanks to its easy applica tion. 1. Apply release agent to the mould 2. Insert EP laminates 3. Assembling of blade and removing release agent 4. Repair defects and contouring of the blade surface with PEHAPOL 2-C Paste 5. Roller application: PEHAPOL WP 2-C Basecoat RA protective coating (surface: 125 μm, leading edge 2 x 125 μm) 6. Fill pores with PEHAPOL 2-C Porefiller 7. Spray application: PEHAPOL WP 2-C Basecoat SA protective coating (surface: 175 μm, leading edge 4 x 175 μm) 8 Apply PEHACRYL 2-C Plastic Paint (2 x μm) or PEHABIN 2-C Hydro Paint (2 x 50 μm) as topcoat Dry film thickness on surface: Dry film thickness on leading edge: μm μm Properties: - Very high abrasion resistance - Smooth surface, low energy losses - Long-lasting thanks to excellent UV resistance - Rational process due to short mould cycle times 9

10 HIGH-END This coating system offers perfect protection. The high surface quality reduces material consumption in finishing. Very smooth rotor blade surfaces reduce energy loss. 1. Apply release agent to the mould 2. Apply PEHAPOL 2-C Gelcoat, transparent ( μm) or PEHAPOL 2-C Gelcoat, pigmented (up to 1000 μm) in the mould 3. Insert EP laminates 4. Assembling of blade and removing release agent 5. Repair defects and contouring of the blade surface with PEHAPOL 2-C Paste 6. Protect the leading edge by applying PEHAPOL 2-C Edgeprotector (3 x μm) 7. Fill pores with PEHAPOL 2-C Porefiller 8. Apply PEHACRYL 2-C Plastic Paint (2 x μm) or PEHABIN 2-C Hydro Paint (2 x 50 μm) as topcoat Dry film thickness: Surface (transparent): Leading edge (transparent): Surface (pigmented): Leading edge (pigmented): μm μm μm μm Properties: - Reliable process due to visibility of lamination defects when using transparent gelcoat - Optimised UV protection when using pigmented gelcoat - Very smooth surface, minimum pores, less sanding work - Best adhesion of protective coating to laminate 10

11 Competence and solid growth since 1906 ISO/TS Certified in accordance with ISO/TS 16949, we fulfil the quality requirements for international automobile suppliers. GL PETER-LACKE products have been tested by an independent, accredited testing institute in accordance with the specifications of leading rotor blade manufacturers and certified by Germanischer Lloyd (GL). All technical data are non-binding reference values only and must be adapted to requirements in each individual case. Please contact our field service team. 11

12 PETER-LACKE GmbH / PETER-LACKE GmbH Herforder Straße Hiddenhausen Germany Tel.: Fax: info@peter-lacke.com